Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | clien14 | Posted: | Oct 22, 2018 22:07 | Subject: | Inventory Change Request for Set 75013-1 | Viewed: | 15 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 6 Part Light Bluish Gray {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 1 Part Dark Red {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)} (Alternate)
Comments from Submitter:
Supporting info from change log timeline:
1. Set was inventoried after 15 Oct 2011, so 3794b variant was available in catalog; therefore, I assume the person that inventoried would have differentiated between the 2 part variants.
2. Set was inventoried before 3794a variant was available in catalogue, meaning that 3794 was the without groove variant at that time.
As a side question, have sets been spotted previously with a mix of variant types, such as 3794a and 3794b in the same sealed set? If not, it looks like the original inventory submission had a typo and the dark red 3794b schools be delayed and its alternate made regular.
|
|
Author: | clien14 | Posted: | Oct 22, 2018 21:53 | Subject: | Inventory Change Request for Set 8093-1 | Viewed: | 14 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Light Bluish Gray {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
Supporting info from change log timeline:
1. Set was inventoried before 15 Oct 2011, so no 3794 variants were available in catalog; however, inventory was verified in 2015, after 3794b variant was available in catalog.
2. Inventory was verified before 3794a variant was available in catalogue, meaning that 3794 was the without groove variant at that time.
|
|
Author: | clien14 | Posted: | Oct 22, 2018 21:39 | Subject: | Inventory Change Request for Set 10225-1 | Viewed: | 16 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 4 Part Light Bluish Gray {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 38 Part White {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
Supporting info from change log timeline:
1. Set was inventoried after 15 Oct 2011, so 3794b variant was available in catalog; therefore, I assume the person that inventoried would have differentiated between the 2 part variants.
2. Set was inventoried before 3794a variant was available in catalog, meaning that 3794 was the without groove variant at that time.
|
|
Author: | clien14 | Posted: | Oct 20, 2018 21:22 | Subject: | Re: Inventory Change Request for Set 9497-1 | Viewed: | 12 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, clien14 writes:
| Please make changes to the following inventory:
* Change 1 Part Dark Bluish Gray {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)} (Alternate)
Comments from Submitter:
Updated to remain as alternate part after discussion in original request.
|
Supporting info was:
Based on change log timeline, part was added as an alternate before 3794a was
in the catalog, meaning it was the without groove variation until the catalog
changed it to undetermined type.
|
|
Author: | clien14 | Posted: | Oct 20, 2018 21:18 | Subject: | Inventory Change Request for Set 9497-1 | Viewed: | 9 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Dark Bluish Gray {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)} (Alternate)
Comments from Submitter:
Updated to remain as alternate part after discussion in original request.
|
|
Author: | clien14 | Posted: | Oct 20, 2018 21:14 | Subject: | Inventory Change Request for Set 75044-1 | Viewed: | 13 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Dark Bluish Gray {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)} (Alternate)
Comments from Submitter:
Based on change log timeline, part was added as an alternate before 3794a was in the catalog, meaning it was the without groove variation until the catalog changed it to undetermined type.
|
|
Author: | clien14 | Posted: | Oct 20, 2018 21:12 | Subject: | Re: Inventory Change Request for Set 9497-1 | Viewed: | 16 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, StormChaser writes:
| In Inventories Requests, clien14 writes:
| Please make changes to the following inventory:
* Change 1 Part Dark Bluish Gray {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)} {Alternate to Regular}
Comments from Submitter:
Based on change log timeline, part was added as an alternate before 3794a was in the catalog, meaning it was the without groove variation until the catalog changed it to undetermined type.
|
Are you sure we should change this part from an alternate part to a regular part?
|
My mistake, didn't see that dropdown field defaulting to regular. I'll
resubmit thisthis request and the other one I just sent as I think it's the
same.
|
|
Author: | clien14 | Posted: | Oct 20, 2018 21:10 | Subject: | Inventory Change Request for Set 75044-1 | Viewed: | 15 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Dark Bluish Gray {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)} {Alternate to Regular}
Comments from Submitter:
Based on change log timeline, part was added as an alternate before 3794a was in the catalog, meaning it was the without groove variation until the catalog changed it to undetermined type.
|
|
Author: | clien14 | Posted: | Oct 20, 2018 21:05 | Subject: | Inventory Change Request for Set 9497-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Dark Bluish Gray {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)} {Alternate to Regular}
Comments from Submitter:
Based on change log timeline, part was added as an alternate before 3794a was in the catalog, meaning it was the without groove variation until the catalog changed it to undetermined type.
|
|
Author: | clien14 | Posted: | Oct 20, 2018 20:42 | Subject: | Inventory Change Request for Set 9495-1 | Viewed: | 16 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Black {30350 Tile, Modified 2 x 3 with 2 Clips (undetermined clip type) to 30350b Tile, Modified 2 x 3 with 2 Clips (thick open O clips)}
Comments from Submitter:
Verified with a used set that I purchased from an extremely deliberate collector who was the original owner and meticulously kept his sets verified and original. Set was adult built, displayed, not played with, and never mixed with other parts.
|
|
Author: | clien14 | Posted: | Oct 20, 2018 20:33 | Subject: | Inventory Change Request for Set 8098-1 | Viewed: | 14 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Dark Bluish Gray {30350 Tile, Modified 2 x 3 with 2 Clips (undetermined clip type) to 30350c Tile, Modified 2 x 3 with 2 Clips (thick U clips)}
* Change 8 Part Light Bluish Gray {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 4 Part Light Bluish Gray {4460 Slope 75 2 x 1 x 3 - Undetermined Stud Type to 4460b Slope 75 2 x 1 x 3 - Hollow Stud}
Comments from Submitter:
Verified from my set which was built and displayed and, when stored, was kept separated from any other sets to prevent mixing of parts, making me confident that they are all the original parts.
|
|
Author: | clien14 | Posted: | Oct 20, 2018 20:08 | Subject: | Inventory Change Request for Set 7964-1 | Viewed: | 14 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 4 Part Light Bluish Gray {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 3 Part Light Bluish Gray {44375 Dish 6 x 6 Inverted (Radar) - Undetermined Stud Type to 44375a Dish 6 x 6 Inverted (Radar) - Hollow Studs}
Comments from Submitter:
Updated change request based on discussion from original request.
|
|
Author: | clien14 | Posted: | Oct 20, 2018 19:47 | Subject: | Inventory Change Request for Set 9498-1 | Viewed: | 15 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Pearl Gold {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
Updated my change request based on discussion regarding alternate parts in my previous request.
|
|
Author: | clien14 | Posted: | Oct 20, 2018 19:30 | Subject: | Re: Inventory Change Request for Set 5540-1 | Viewed: | 21 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, StormChaser writes:
| Please make changes to the following inventory:
* Change 1 Part Red 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper) {Regular to Extra}
Comments from Submitter:
Pop quiz: what supersecret and easy method did I use to locate this error in this inventory?
|
I am still fairly new to BrickLink, but my guess would be that there was 2 line
items for the same part that tipped you off?
|
|
Author: | clien14 | Posted: | Oct 20, 2018 19:17 | Subject: | Re: Inventory Change Request for Set 7964-1 | Viewed: | 20 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, StormChaser writes:
| In Inventories Requests, clien14 writes:
| Please make changes to the following inventory:
* Change 3 Part Light Bluish Gray {44375 Dish 6 x 6 Inverted (Radar) - Undetermined Stud Type to 44375b Dish 6 x 6 Inverted (Radar) - Solid Studs}
|
Please tell us what source you're using for this change request and tell
us a little about the source. Thank you.
|
Similar to my change for set 9498, this may make more sense to change to 44375a
based on the fact that someone identified 44375b as an alternate part.
|
|
Author: | clien14 | Posted: | Oct 20, 2018 16:26 | Subject: | Inventory Change Request for Set 7964-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 4 Part Light Bluish Gray {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
I noticed this while looking through the inventory change log for my other request on this set. The set I have has the old style 3794a as the original part.
|
|
Author: | clien14 | Posted: | Oct 20, 2018 15:46 | Subject: | Re: Inventory Change Request for Set 7752-1 | Viewed: | 17 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, StormChaser writes:
| In Inventories Requests, clien14 writes:
| Please make changes to the following inventory:
* Change 1 Part Dark Bluish Gray {3044 Slope 45 2 x 1 Double - Undetermined Underside to 3044b Slope 45 2 x 1 Double - with Inside Bar}
|
Please tell us what source you're using for this change request and tell
us a little about the source. Thank you.
|
I verified this from my set. I bought it used; however, it was from the original
owner and had never been broken down to mix up parts with other sets. All of
the other part types and variations corresponded to the current inventory, so
I felt confident that this was the original part.
|
|
Author: | clien14 | Posted: | Oct 20, 2018 15:32 | Subject: | Re: Inventory Change Request for Set 7964-1 | Viewed: | 18 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, StormChaser writes:
| In Inventories Requests, clien14 writes:
| Please make changes to the following inventory:
* Change 3 Part Light Bluish Gray {44375 Dish 6 x 6 Inverted (Radar) - Undetermined Stud Type to 44375b Dish 6 x 6 Inverted (Radar) - Solid Studs}
|
Please tell us what source you're using for this change request and tell
us a little about the source. Thank you.
|
Oops, my mistake. I verified this with my 7964 set which has been only adult
owned, built, and displayed, never played with and was always stored with parts
separate from any other sets.
|
|
Author: | clien14 | Posted: | Oct 20, 2018 15:20 | Subject: | Re: Inventory Change Request for Set 9498-1 | Viewed: | 21 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, StormChaser writes:
| In Inventories Requests, clien14 writes:
| Please make changes to the following inventory:
* Delete 2 Part 3794b Pearl Gold Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) (Alternate) (match ID 2)
* Change 2 Part Pearl Gold {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper)}
Comments from Submitter:
Specific type of part mould was entered as an alternate item instead of an inventory change.
|
Actually, I think what may have happened here is that the part without the groove
was originally inventoried in the set. Then someone found that some of the sets
included the part with a groove and added it as an alternate part.
Years later, someone decided to include the letter "a" at the end of the part
without a groove, so a new catalog entry was created for the part and the original
part without a groove was changed to be an undetermined entry. When that happened
it left the undetermined entry in the inventory where now the part without a
groove (3794a) should go.
It might be better here to replace the undetermined part for this set with the
3794a part. You can see the changes made in the past to this inventory by looking
toward the bottom of the inventory page and clicking the log of completed
changes button. Look for the changes made on Oct 29, 2012.
By the way, I never heard back from you about becoming an inventory verifier.
Is this still something you want to do?
|
Good day,
After looking through the logged changes as you suggested, I would agree
that the alternate part should likely remain and the undetermined type be changed
to the 3794a party.
Have a great day,
Chris
|
|
Author: | clien14 | Posted: | Oct 20, 2018 14:58 | Subject: | Inventory Change Request for Set 7964-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 3 Part Light Bluish Gray {44375 Dish 6 x 6 Inverted (Radar) - Undetermined Stud Type to 44375b Dish 6 x 6 Inverted (Radar) - Solid Studs}
|
Author: | clien14 | Posted: | Oct 20, 2018 14:49 | Subject: | Inventory Change Request for Set 7752-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Dark Bluish Gray {3044 Slope 45 2 x 1 Double - Undetermined Underside to 3044b Slope 45 2 x 1 Double - with Inside Bar}
|
|
Author: | clien14 | Posted: | Oct 19, 2018 22:46 | Subject: | Inventory Change Request for Set 9498-1 | Viewed: | 30 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 2 Part 3794b Pearl Gold Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) (Alternate) (match ID 2)
* Change 2 Part Pearl Gold {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper)}
Comments from Submitter:
Specific type of part mould was entered as an alternate item instead of an inventory change.
|
|
Author: | clien14 | Posted: | Oct 2, 2018 22:17 | Subject: | Inventory Change Request for Set 75017-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change {7 to 9} Part Dark Brown 54200 Slope 30 1 x 1 x 2/3
Comments from Submitter:
Verified from my original printed instructions.
|
Author: | clien14 | Posted: | Sep 8, 2018 10:06 | Subject: | Inventory Change Request for Set 7660-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Dark Bluish Gray {30350 Tile, Modified 2 x 3 with 2 Clips (undetermined clip type) to 30350c Tile, Modified 2 x 3 with 2 Clips (thick U clips)}
Comments from Submitter:
Verified on my 7660 set.
|
|
Author: | clien14 | Posted: | Sep 8, 2018 09:58 | Subject: | Inventory Change Request for Set 8095-1 | Viewed: | 16 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 8 Part Black {4599 Tap 1 x 1 - Undetermined Nozzle End to 4599b Tap 1 x 1 without Hole in Nozzle End}
Comments from Submitter:
Verified on my 8095 set.
|
|
Author: | clien14 | Posted: | Sep 8, 2018 00:12 | Subject: | Inventory Change Request for Set 10175-1 | Viewed: | 26 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Dark Bluish Gray {30350 Tile, Modified 2 x 3 with 2 Clips (undetermined clip type) to 30350c Tile, Modified 2 x 3 with 2 Clips (thick U clips)}
Comments from Submitter:
I just inventoried my 10175 set and noticed that it still listed the unspecified part type.
|
|