Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | clien14 | Posted: | May 15, 2021 12:57 | Subject: | Inventory Change Request for Set 75188-1 | Viewed: | 34 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Minifigure sw1005 Resistance Bomber Pilot - Finch Dallow (Alternate) (match ID 99)
* Change 1 Minifigure sw0861 Resistance Bomber Pilot {match ID 99 to 0}
Comments from Submitter:
SW1005 should be removed and added to 75188-2 as it was a limited release with different box and instructions. Other early sets with different box and instruction releases have also gotten separate entries, such as 4502-1 blue box and 4502-2 original trilogy box
|
|
Author: | clien14 | Posted: | Oct 23, 2018 22:35 | Subject: | Re: Inventory Change Request for Set 8095-1 | Viewed: | 25 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, StormChaser writes:
| In Inventories Requests, clien14 writes:
| Please make changes to the following inventory:
* Change 8 Part Black {4599b Tap 1 x 1 without Hole in Nozzle End to 4599a Tap 1 x 1 with Hole in Nozzle End}
Comments from Submitter:
Part was changed from undetermined, but this variant was listed as an alternate already.
Also, from the timeline, the inventory was added before 4599a was in the catalog, when the 4599 used to indicate the hole in end variant.
|
I apologize that I encouraged you on this course when (in a momentary lapse of
judgment) I approved your similar requests for sets 75044-1 and 9497-1. Please
read the discussions about the jumper plates in these threads:
https://www.bricklink.com/messageThread.asp?ID=240948&nID=1103746
https://www.bricklink.com/messageThread.asp?ID=231759&nID=1075720
Unfortunately, we have decided not to approve any of your pending requests for
jumper plates and 1 x 1 taps. For the set inventories in which these items are
undetermined, the variants need to be checked in actual sets (brand new sets,
although other sources will be considered).
|
Ok, I'll look for opportunities to verify with actual sets when I have a
chance.
|
|
Author: | clien14 | Posted: | Oct 23, 2018 13:40 | Subject: | Inventory Change Request for Set 9499-1 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 4 Part Blue {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)} (Alternate)
Comments from Submitter:
Supporting info from change log and timeline:
1. Alternate was added after 15 Oct 2011, so 3794b variant was available in catalog; therefore, I assume the person that added would have differentiated between the 2 part variants.
2. Alternate was added before 3794a variant was available in catalogue, meaning that 3794 was representing the without groove variant at that time.
|
|
Author: | clien14 | Posted: | Oct 23, 2018 13:29 | Subject: | Inventory Change Request for Set 75051-1 | Viewed: | 13 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 4 Part Reddish Brown {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)} (Alternate)
Comments from Submitter:
Supporting info from change log and timeline:
1. Alternate was added after 15 Oct 2011, so 3794b variant was available in catalog; therefore, I assume the person that added would have differentiated between the 2 part variants.
2. Alternate was added before 3794a variant was available in catalogue, meaning that 3794 was representing the without groove variant at that time.
|
|
Author: | clien14 | Posted: | Oct 23, 2018 13:26 | Subject: | Inventory Change Request for Set 75024-1 | Viewed: | 8 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Reddish Brown {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)} (Alternate)
Comments from Submitter:
Supporting info from change log and timeline:
1. Alternate was added after 15 Oct 2011, so 3794b variant was available in catalog; therefore, I assume the person that added would have differentiated between the 2 part variants.
2. Alternate was added before 3794a variant was available in catalogue, meaning that 3794 was representing the without groove variant at that time.
|
|
Author: | clien14 | Posted: | Oct 23, 2018 13:23 | Subject: | Inventory Change Request for Set 75052-1 | Viewed: | 11 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 3 Part Dark Red {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)} (Alternate)
Comments from Submitter:
Supporting info from change log and timeline:
1. Alternate was added after 15 Oct 2011, so 3794b variant was available in catalog; therefore, I assume the person that added would have differentiated between the 2 part variants.
2. Alternate was added before 3794a variant was available in catalogue, meaning that 3794 was representing the without groove variant at that time.
|
|
Author: | clien14 | Posted: | Oct 23, 2018 13:14 | Subject: | Inventory Change Request for Set 75025-1 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Black {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)} (Alternate)
* Change 8 Part Dark Red {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)} (Alternate)
Comments from Submitter:
Supporting info from change log and timeline:
1. Alternates were added after 15 Oct 2011, so 3794b variant was available in catalog; therefore, I assume the person that added would have differentiated between the 2 part variants.
2. Alternates were added before 3794a variant was available in catalogue, meaning that 3794 was representing the without groove variant at that time.
|
|
Author: | clien14 | Posted: | Oct 23, 2018 13:11 | Subject: | Inventory Change Request for Set 9500-1 | Viewed: | 10 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Light Bluish Gray {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)} (Alternate)
Comments from Submitter:
Supporting info from change log and timeline:
1. Alternate was added after 15 Oct 2011, so 3794b variant was available in catalog; therefore, I assume the person that added would have differentiated between the 2 part variants.
2. Alternate was added before 3794a variant was available in catalogue, meaning that 3794 was representing the without groove variant at that time.
|
|
Author: | clien14 | Posted: | Oct 23, 2018 13:08 | Subject: | Inventory Change Request for Set 75038-1 | Viewed: | 11 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Light Bluish Gray {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)} (Alternate)
Comments from Submitter:
Supporting info from change log and timeline:
1. Alternate was added after 15 Oct 2011, so 3794b variant was available in catalog; therefore, I assume the person that added would have differentiated between the 2 part variants.
2. Alternate was added before 3794a variant was available in catalogue, meaning that 3794 was representing the without groove variant at that time.
|
|
Author: | clien14 | Posted: | Oct 23, 2018 13:04 | Subject: | Inventory Change Request for Set 9525-1 | Viewed: | 20 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part White {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)} (Alternate)
Comments from Submitter:
Supporting info from change log and timeline:
1. Alternate part was added after 15 Oct 2011, so 3794b variant was available in catalog; therefore, I assume the person that added would have differentiated between the 2 part variants.
2. Part was added before 3794a variant was available in catalogue, meaning that 3794 was representing the without groove variant at that time.
|
|
Author: | clien14 | Posted: | Oct 23, 2018 13:00 | Subject: | Inventory Change Request for Set 7962-1 | Viewed: | 12 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 12 Part Yellow {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
Supporting info from change log and timeline:
1. Set was verified after 15 Oct 2011, so 3794b variant was available in catalog; therefore, I assume the person that inventoried would have differentiated between the 2 part variants.
2. Set was inventoried before 3794a variant was available in catalogue, meaning that 3794 was representing the without groove variant at that time.
|
|
Author: | clien14 | Posted: | Oct 23, 2018 12:55 | Subject: | Inventory Change Request for Set 9515-1 | Viewed: | 11 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 24 Part Dark Blue {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 4 Part Dark Red {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
Supporting info from change log and timeline:
1. Set was inventoried after 15 Oct 2011, so 3794b variant was available in catalog; therefore, I assume the person that inventoried would have differentiated between the 2 part variants.
2. Set was inventoried before 3794a variant was available in catalogue, meaning that 3794 was representing the without groove variant at that time.
|
|
Author: | clien14 | Posted: | Oct 23, 2018 12:49 | Subject: | Inventory Change Request for Set 8091-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 3 Part Dark Red {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
Set was verified after 3794b was available in catalog, but before 3794a was available in catalog, meaning they used 3794 when it used to represent the 3794a variant.
|
|
Author: | clien14 | Posted: | Oct 23, 2018 12:41 | Subject: | Inventory Change Request for Set 75016-1 | Viewed: | 16 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Black {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
Set was inventoried after 3794b was available, but before 3794a was available, meaning that 3794 was used when it used to represent what is now the 3794a variant.
|
|
Author: | clien14 | Posted: | Oct 23, 2018 12:36 | Subject: | Inventory Change Request for Set 8095-1 | Viewed: | 17 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 8 Part Black {4599b Tap 1 x 1 without Hole in Nozzle End to 4599a Tap 1 x 1 with Hole in Nozzle End}
Comments from Submitter:
Part was changed from undetermined, but this variant was listed as an alternate already.
Also, from the timeline, the inventory was added before 4599a was in the catalog, when the 4599 used to indicate the hole in end variant.
|
|
Author: | clien14 | Posted: | Oct 22, 2018 23:16 | Subject: | Re: Inventory Change Request for Set 75013-1 | Viewed: | 16 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, clien14 writes:
| Please make changes to the following inventory:
* Change 6 Part Light Bluish Gray {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 1 Part Dark Red {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)} (Alternate)
Comments from Submitter:
Supporting info from change log timeline:
1. Set was inventoried after 15 Oct 2011, so 3794b variant was available in catalog; therefore, I assume the person that inventoried would have differentiated between the 2 part variants.
2. Set was inventoried before 3794a variant was available in catalogue, meaning that 3794 was the without groove variant at that time.
As a side question, have sets been spotted previously with a mix of variant types, such as 3794a and 3794b in the same sealed set? If not, it looks like the original inventory submission had a typo and the dark red 3794b schools be delayed and its alternate made regular.
|
After researching, I confirmed that sets have been known to have mixed parts
during variant transition, so this request stands as is.
|
|
Author: | clien14 | Posted: | Oct 22, 2018 23:14 | Subject: | Re: Inventory Change Request for Set 75042-1 | Viewed: | 20 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, clien14 writes:
| Please make changes to the following inventory:
* Change 1 Part Dark Bluish Gray {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
Supporting info from change log timeline:
1. Set was inventoried after 15 Oct 2011, so 3794b variant was available in catalog; therefore, I assume the person that inventoried would have differentiated between the 2 part variants.
2. Set was inventoried before 3794a variant was available in catalogue, meaning that 3794 was the without groove variant at that time.
Similar to my other request regarding mixed sets, this set was inventoried with both 3794 variants inn different colours. If you don't get mixed variants, there is either a missing alternate entry or the original inventory had a typo and there shouldn't be an alternate 3794.
|
After doing a quick internet check, I see that sets could have mixed parts when
transitioning between part variants, so this request is good as is, no other
inventory correcting required.
|
|
Author: | clien14 | Posted: | Oct 22, 2018 22:30 | Subject: | Inventory Change Request for Set 8085-1 | Viewed: | 15 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Dark Bluish Gray {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
Supporting info from change log timeline:
1. Set was inventoried before 15 Oct 2011, so no 3794b variant was available in catalog; however, it was verified in 2012 after 3794b variant was available in catalog.
2. Set was verified before 3794a variant was available in catalogue, meaning that 3794 was the without groove variant at that time.
|
|
Author: | clien14 | Posted: | Oct 22, 2018 22:23 | Subject: | Inventory Change Request for Set 75042-1 | Viewed: | 10 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Dark Bluish Gray {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
Supporting info from change log timeline:
1. Set was inventoried after 15 Oct 2011, so 3794b variant was available in catalog; therefore, I assume the person that inventoried would have differentiated between the 2 part variants.
2. Set was inventoried before 3794a variant was available in catalogue, meaning that 3794 was the without groove variant at that time.
Similar to my other request regarding mixed sets, this set was inventoried with both 3794 variants inn different colours. If you don't get mixed variants, there is either a missing alternate entry or the original inventory had a typo and there shouldn't be an alternate 3794.
|
|
Author: | clien14 | Posted: | Oct 22, 2018 22:13 | Subject: | Inventory Change Request for Set 75050-1 | Viewed: | 13 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 6 Part Dark Bluish Gray {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
Supporting info from change log timeline:
1. Set was inventoried after 15 Oct 2011, so 3794b variant was available in catalog; therefore, I assume the person that inventoried would have differentiated between the 2 part variants.
2. Set was inventoried before 3794a variant was available in catalogue, meaning that 3794 was the without groove variant at that time.
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|