Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | r.godfrey  | | Posted: | Jun 29, 2021 05:39 | | Subject: | Set 6081 | | Viewed: | 107 times | | Topic: | Inventories | | Status: | Open | |
|
| Hi - In the inventory one of the figures has a black helmet. Page 2 of my instructions
I swear both the figures that go on the horses have dark grey helmets. Can anyone
else check their instructions please? Thanks, Rebecca
|
| Author: | Bonacieux | | Posted: | Jun 21, 2021 06:02 | | Subject: | Cardboxes in Friends Play Cube's | | Viewed: | 59 times | | Topic: | Inventories | | Status: | Open | |
|
| In all Friends Play Cube's are cardboxes in several colours where the Animals
are in.
I have one in lavender with Nr. 6352176, coral puppie from set 41669-1 Mia's
soccer cube.
Should the cardboxes be inventoried or not?
|
| Author: | samsam2 | | Posted: | Jun 19, 2021 11:34 | | Subject: | set 8000 Pit Droid, rubber band, polybag | | Viewed: | 48 times | | Topic: | Inventories | | Status: | Open | |
|
| Not sure if there is anything to determine about two different ways the rubber
bands are packaged, other than verifying the counts of the 3 different elastic
types in this set:
one has 3 separate bags for the 3 different rubber bands, while the other has
all rubber bands in one polybag. Both are still sealed polybags.
|
|
 |
| Author: | DizneyBricks | | Posted: | Jun 15, 2021 19:42 | | Subject: | nothing is pulling up in my inventory | | Viewed: | 75 times | | Topic: | Inventories | | Status: | Open | |
|
| suddenly I'm unable to pull anything up in my inventory. The front screen
shows I have parts in all the catagories but when I click on the catagory it
comes up saying no items found. I've rebooted my computer and used another
device and it happens on every device.
anybody know whats going on?
Happy Building
sandy
|
| Author: | SnarkBricks | | Posted: | Jun 15, 2021 11:57 | | Subject: | Inventories Change Request for set 10281-1 | | Viewed: | 27 times | | Topic: | Inventories | | Status: | Open | |
|
| I found (4) Part # 44861 Medium Nougat Plate, Modified 1 x 2 with Open O Clip
on Top
in the 2 sets I ordered rather than the (4) inventoried part # 92280
Maybe this is an alternate??
|
|
| Author: | BricksApeldoorn | | Posted: | Jun 12, 2021 09:40 | | Subject: | Brickstock mass update issue... | | Viewed: | 89 times | | Topic: | Inventories | | Status: | Open | |
|
| Hi there,
I am updating my Bricklink inventory in Brickstock. If I select some lots in
Brickstock and then click on the "mass update option" Bricklink opens as it should.
But when I paste the data in the text box afterwards, only appears.
Sometimes 1 lot is entered correctly, but the other lots are not at all.
Couldn't find a solution in the topics or on Google... so please help 
With regards
Dave
|
|
| Author: | Nekzuris | | Posted: | Jun 10, 2021 20:38 | | Subject: | Question regarding set 8284 | | Viewed: | 76 times | | Topic: | Inventories | | Status: | Open | |
|
| Hello,
I don't understand why the set number 8284-1 is for the Buggy and the Tractor
is 8284-2 ?
I just discovered that a box with the buggy on the front cover was produce but
still the most common model when searching for 8284 seems to be the Tractor.
8284-1 on Rebrickable is the Tractor.
Regards,
Louis
|
| Author: | tom9092 | | Posted: | May 30, 2021 20:09 | | Subject: | Stockrom | | Viewed: | 76 times | | Topic: | Inventories | | Status: | Open | |
|
| Why when I sell an item and my inventory goes to 0 it goes to the stockroom.
I always have to go to inventory to delete my item
Thanks
|
|
| Author: | weblectricity | | Posted: | May 28, 2021 14:12 | | Subject: | Friends Play Cubes help | | Viewed: | 79 times | | Topic: | Inventories | | Status: | Open | |
|
| Hi,
I'd like to inventory some Friends Play Cubes from 2020, as they're still
not been inventoried, but there's some things that I'm not sure about.
(I've looked at the help section but did not find the answers.)
I have the sets 41662 and 41665, both include:
- custom cube parts,
- cloth pieces that attach to the outside of the Cubes,
- random color pet/animal.
All of the above is not yet in the Bricklink Catalog.
My questions:
1. I can add the 2 custom cube parts. Do I need to provide images? Can I use
official LEGO images from Brickset?
2. I have no idea how to add the cloth pieces, previous Friends Cubes did not
have cloth pieces and I have no precedence for item names. Do I just make a good
guess and rely on the inventory team to make the right call? Again, do I need
to provide photos and can I use official images?
3. For the random pet I can check Brickset for the official colors, but I only
have one actual pet. Is this course of action okay?
Thanks for now!
Best,
Peter
|
|
| Author: | BobShuster | | Posted: | May 26, 2021 15:21 | | Subject: | add inventory item (original box) 50011 | | Viewed: | 58 times | | Topic: | Inventories | | Status: | Open | |
|
| I attempted to add an original box entry for 50011 Lord of the Rings: Battle
of Helm's Deep (game) and the item number verify fails. I entered 50011
and the system autofilled "1" in the next column but it doesn't recognize
it. Also tried G50011. Is the issue because the set is catalogued as "gear"
rather than as a set?
Help/thoughts?
|
|
| Author: | LeeGo73 | | Posted: | May 17, 2021 18:45 | | Subject: | Inventory Change Request for Set 75913-1 | | Viewed: | 35 times | | Topic: | Inventories | | Status: | Open | |
|
| Missing counterpart from set 75913-1
Part 30237b with sticker 30/31 from 75913stk01
This piece is part of the tool trolley (2 in set)
|
|
| Author: | tEoS | | Posted: | May 16, 2021 21:10 | | Subject: | Wrong Krana Holder piece in sets? | | Viewed: | 87 times | | Topic: | Inventories | | Status: | Open | |
|
| An issue has come up at least a couple times on the forum due to this part, specifically
regarding the "pin hole":
In these sets, the part has a recessed axle hole (loose fitting). I think it
helps to keep the eyes aligned properly:
|
|
| Author: | Senrab156 | | Posted: | May 16, 2021 12:41 | | Subject: | Identifying parts | | Viewed: | 74 times | | Topic: | Inventories | | Status: | Open | |
|
| Hi everyone,
GOOGOL:1 gear box with only LEGO gears
Is there a list of all parts for this.
I have identified all but one. Hope someone can help please
In the middle of the instruction there are twenty clear plastic parts in which
cog 5439 as paired with 4716
Hoping somebody can tell me the part number
Thanks all
Senrab156
|
|
| Author: | nathandawson | | Posted: | May 14, 2021 10:08 | | Subject: | Compare inventory to wanted list | | Viewed: | 70 times | | Topic: | Inventories | | Status: | Open | |
|
| Morning Guys,
I have been trying to find a efficient way of inventorying minifigures that are
not complete and waiting to be so.
I love to here how you do it please 
I was watching a YouTube video from Ralph's Bricks (nice guy and calming
to watch); his way is to part out the figures to a wish list and manage it from
there. I can see some good logic in that but what I cannot seem to figure out
or know if it is even possible.... can you get the wish list to check your own
inventory and add it to the "have" field (or just show if) you have any in there?
it would allow me to not have to manually check the wish lists against parts
I may of added.
Any tips or advice is welcome
|
|
| Author: | building4ever | | Posted: | May 13, 2021 02:39 | | Subject: | Hack or workaround for not yet released sets? | | Viewed: | 111 times | | Topic: | Inventories | | Status: | Open | |
|
| I'm looking for a trick to add sets that have been announced but haven't
been released yet to my wanted lists. Is there some kind of placeholder set that
could be used?
|
| Author: | dimitris_victor | | Posted: | May 13, 2021 02:35 | | Subject: | 2000414 | | Viewed: | 74 times | | Topic: | Inventories | | Status: | Open | |
|
| Hello from Greece,
My first time at the forum...Ive just received the 2000414 that I ordered about
over 2 months ago and thats because it was out of stock.As I can see on the box
it says that it has 234 pieces in it,while on the previous box it was written
219 pieces.I havent opened it yet to see what parts are new in it,I wanted just
to tell this to you.
Dimitrios
|
|
| Author: | spacecaptain | | Posted: | May 10, 2021 14:18 | | Subject: | Adding your own weight | | Viewed: | 54 times | | Topic: | Inventories | | Status: | Open | |
|
| Hello. Can you add a weight to items that don't have one listed? In this
instance the 71028 set. Just so it will get the buyer a shipping cost instantly.
Thank you!
|
| Author: | Freshbrick14000 | | Posted: | May 8, 2021 16:41 | | Subject: | Parting out individual bags of sets | | Viewed: | 46 times | | Topic: | Inventories | | Status: | Open | |
|
| Hello, does anyone know if there is an easy way to part out a specific numbered
bag of a set instead of parting out the entire thing? I ask because I do not
have enough room to part out an entire set, but I do have the room to part out
a few different bag numbers from the set.
Thanks, Ski town bricks
|
|
| Author: | rslander | | Posted: | May 7, 2021 15:18 | | Subject: | Searching by color in Brickstore/Brickstock? | | Viewed: | 56 times | | Topic: | Inventories | | Status: | Open | |
|
| Hi, apologies if this isn't the correct place to ask, but I was wanting to
create a list to mass upload parts to my inventory and was told about Brickstore
and Brickstock.
I was wanting to know if there was a way to search for a specific color of a
part. I've attached a picture as an example, I want to search for light
nougat female minifig heads. Is this possible in either of the applications?
If not is there a different piece of software I could use? Thank you!
|
|
|
| Author: | samsam2 | | Posted: | May 4, 2021 21:11 | | Subject: | 6950 piece count on box | | Viewed: | 120 times | | Topic: | Inventories | | Status: | Open | |
|
| You can see in the additional image for the box I just submitted for set
the piece count is 220. Whereas the current inventory for the set with minifigs
broken down gives a part count of 207, a difference of 13 pieces.
I guess this is common in old sets? But there could have been 'extras'
included but not needed in the instructions? Or is this another 'packaged
by Samsonite' difference?
|
|
| Author: | StonesHeart | | Posted: | Apr 29, 2021 11:36 | | Subject: | Set 8640, please remove 2714a (light grey) | | Viewed: | 98 times | | Topic: | Inventories | | Status: | Open | |
|
| Hello All,
I own the set 8640 and item 2714a (light grey) shows nowhere in the instruction
or on the box. For this reqason I think it should be removed from the Bricklink
inventory. Is this the right place to post this?
Perhaps someone was mistaken for item 2714a (Yellow), this is the correct part
and this is correctly in the Bricklink inventory as well.
Thanks for your comments and/or reply.
Kind Regards,
Marco
|
|
| Author: | sunshinemcmanio | | Posted: | Apr 25, 2021 12:30 | | Subject: | Loading and editing an inventory list | | Viewed: | 31 times | | Topic: | Inventories | | Status: | Open | |
|
| Hi there its my first time posting so a bit unsure how to go about this but here
goes. I am wanting to buy the parts to assemble the star wars rebels ghost ship
but want to exclude the figures and sticker sheets to reduce the cost. Is there
a way of uploading the parts list for this set to the cart and then i can edit
out the parts i don't want without having to manually select each part type
and individually add them to cart which would take ages
|
|
| Author: | k8drums | | Posted: | Apr 21, 2021 13:27 | | Subject: | Move bulk items out of stockroom | | Viewed: | 50 times | | Topic: | Inventories | | Status: | Open | |
|
| My apologies if this is something i'm just missing,
I moved a lot of my active listing to the stockroom since I was moving. Now I
want to move them out.
Is there an easy way to do this?
plz plz plz
Thanks in advance
|
| Author: | batman11223 | | Posted: | Apr 20, 2021 16:25 | | Subject: | Please Approve Winnie the Pooh 21326 | | Viewed: | 105 times | | Topic: | Inventories | | Status: | Open | |
|
| Users have been waiting a month for this to be uploaded and approved.
Thankyou (:
|
| Author: | michaelpatko | | Posted: | Apr 20, 2021 13:41 | | Subject: | 10283 Shuttle Discovery | | Viewed: | 87 times | | Topic: | Inventories | | Status: | Open | |
|
| Good day everyone.
I've often wondered how new set inventories are added to bricklink?
This set has been out for three weeks.
I understand that new parts need a designation.
For example parts 10283stk01 and 10283stk02 for the sticker sheets.
Can any user create the "official" inventory?
I'm eager to get this set listed so I can order duplicate sticker sheets.
|
|
| Author: | ccbrickworx | | Posted: | Apr 17, 2021 21:34 | | Subject: | Inventory - Wishlist or Seller "Stockroom"? | | Viewed: | 52 times | | Topic: | Inventories | | Status: | Open | |
|
| So I just ended up buying like 30lbs of Lego's from a FB Marketplace seller
and now I need to inventory what all is there.
What I'd like to be able to do is have my inventory to where when I upload
a .io file to a wishlist, I can do a search to see what I already have so I don't
end up buying extra pieces.
Is that possible with either a standard Wishlist or with a Seller's account
with everything listed as "stockroom" ?
Thanks
|
| Author: | strawbrick | | Posted: | Apr 16, 2021 04:59 | | Subject: | Export Part list of a set | | Viewed: | 43 times | | Topic: | Inventories | | Status: | Open | |
|
| Dear all, is there a chance to export a set inventory (part list incl. picture)
into a nice printable format?
|
| Author: | LegoCharlieP | | Posted: | Apr 10, 2021 22:24 | | Subject: | Need help to set up a Inventory list | | Viewed: | 59 times | | Topic: | Inventories | | Status: | Open | |
|
| I am currently buying more parts then I need, any suggestions on a way of keeping
track of my extra parts I have so I will stop buying parts that I have already
own?
|
| Author: | legomaster100 | | Posted: | Apr 7, 2021 20:32 | | Subject: | Set 21326 | | Viewed: | 74 times | | Topic: | Inventories | | Status: | Open | |
|
| Is anyone going to add the inventories - I want to part out the set
I have no idea how to
-M
|
| Author: | shiniz | | Posted: | Apr 4, 2021 03:29 | | Subject: | Process for make a new inventories | | Viewed: | 43 times | | Topic: | Inventories | | Status: | Open | |
|
| Hello,
I want to take inventory of a new set, freshly released. In this set there are
new parts and new minifigures not referenced in Bricklink. Do you know how to
proceed to carry out this inventory?
Thanks for your help
|
|
| Author: | weblectricity | | Posted: | Apr 3, 2021 16:25 | | Subject: | inventory process | | Viewed: | 75 times | | Topic: | Inventories | | Status: | Open | |
|
| Hello,
I'd like to submit an inventory for a set that has not been inventoried yet.
It's a Lego Friends set, 41446. I've previously inventories a polybag
set, but this one is bigger.
I've browsed around the site but have not found answers to my questions,
though maybe I've missed something.
My questions:
1) There are 3 new minifigures. Do I have to first seperately submit the minifigures
to the catalog and wait for them to be approved before I can submit the set,
or can I just submit them with the set?
2) There's a sticker sheet. Again do I have to submit the sticker sheet seperately
or along with the set? Do I need to provide photos?
3) Do I have to provide photographs for the stickered parts/counterparts? I don't
want to apply the stickers.
Anyway, I'm off to opening the set and assembling the minifigs to take some
photos.
Thank you,
best,
Peter
|
|
| Author: | CapstoneBricks | | Posted: | Apr 3, 2021 13:16 | | Subject: | Refund | | Viewed: | 91 times | | Topic: | Inventories | | Status: | Open | |
|
| | When I issue a full refund does the inventory go back into my inventory automatically? |
| Author: | Bricks2Love | | Posted: | Apr 3, 2021 06:35 | | Subject: | First Lego League set 9781 | | Viewed: | 46 times | | Topic: | Inventories | | Status: | Open | |
|
| Hi,
Is here anybody how can help me wit more information about these first Lego league
set 9781.
Its in the time period of the rcx and it was a set from around the year 2000.
The content was 726 pcs.
I have the cover of the green box but cant find anything about it.
Kind regards Guido
|
|
|
| Author: | TugiBrick | | Posted: | Mar 31, 2021 14:56 | | Subject: | 252 Locomotive with Driver and Pssengers | | Viewed: | 68 times | | Topic: | Inventories | | Status: | Open | |
|
| Hi there,
as I'm not sure but want to know how it is I'd like to ask for the colour
of the male hair X197. Lego always displayed all parts on the box also as in
the instruction. Here in Bricklink it's described as Brown but in
the instruction is shown as Black. Peeron also describes part X197 as
Black. Even in my collection the hair part X197 also is Black.
So perhaps someone can verify this detail of this beautiful elderly set of Homemaker
series? I cannot imagine the colour other as Black.
Thanks so lot for your answers.
Claudia
|
|
| Author: | foxweasle | | Posted: | Mar 29, 2021 16:10 | | Subject: | 71044-1 Stickered Counterparts | | Viewed: | 44 times | | Topic: | Inventories | | Status: | Open | |
|
| I thought I would see how the members of this group felt on this subject. I am
currently working on Confirming the Accuracy of this set. Disney Train and Station.
I bought a brand new set from the Lego store so I have every piece and sticker.
I noticed on the inventory list that there are only a few counterparts. There
are a bunch of bricks and tiles that have stickers applied to them. Should these
be added to the bricklink catalog and then added as Counterparts to the set,
before or after I confirm the Accuracy of the set? I am building the set as I
confirm the inventory and I can easily add these parts for approval by bricklink
to the bricklink Catalog and then list them as Counterparts.
|
|
| Author: | Tresbrick | | Posted: | Mar 27, 2021 17:06 | | Subject: | reset prices to avg | | Viewed: | 81 times | | Topic: | Inventories | | Status: | Open | |
|
| hello, I would like to know if it is possible to set inventory prices on the
average price? for all the parts for example.
Thanks
|
| Author: | Skullfyre | | Posted: | Mar 23, 2021 16:16 | | Subject: | The Brick Moulding Machine Item No: 40502-1 | | Viewed: | 69 times | | Topic: | Inventories | | Status: | Open | |
|
| Can I ask for someone to post the parts list for this set.
The Brick Moulding Machine - Item No: 40502-1
Didn't know if this was the right place to ask or not.
Thanks.
|
| Author: | jonwil | | Posted: | Mar 23, 2021 15:47 | | Subject: | Error in inventory for set 45813-1 | | Viewed: | 31 times | | Topic: | Inventories | | Status: | Open | |
|
| The inventory for claims it contains in tan. But according
to the LEGO inventory for the set, it actually contains in tan.
When I try to amend the inventory through the usual form, it gives me an error,
hence the post here.
|
|
| Author: | bengreen28 | | Posted: | Mar 15, 2021 06:51 | | Subject: | Stickered parts in sets | | Viewed: | 61 times | | Topic: | Inventories | | Status: | Open | |
|
| I have just had a set deleted, it was listed as complete as all parts and minifigs
were present. It was listed missing a couple of the stickers with others in a
poor state.
My question is, do missing stickers make the set incomplete? The parts the stickers
go on are present it’s just the sticker that is missing.
|
| Author: | Oldguysbricks | | Posted: | Mar 11, 2021 15:27 | | Subject: | 060-2 Inventory | | Viewed: | 50 times | | Topic: | Inventories | | Status: | Open | |
|
| | How can I get hold of the set inventory for set 060-2 from 1965 ?? |
| Author: | Dat_smol_brick | | Posted: | Mar 11, 2021 02:18 | | Subject: | Set 700-12 inventory still pending | | Viewed: | 53 times | | Topic: | Inventories | | Status: | Open | |
|
| So, like over half a year my inventory for the set 700-12 Automatic Binding
Bricks (Yes, it's the first Lego-set ever.) is still pending. I found
an inventory for the set, and it was the 1951 version, as known as the third
version (Image below.) I am about 90% sure this inventory is a real inventory.
Does anyone know why is it still pending?
|
|
|
| Author: | pepper | | Posted: | Mar 10, 2021 11:08 | | Subject: | Storeroom and Inventory help | | Viewed: | 59 times | | Topic: | Inventories | | Status: | Open | |
|
| Hi everybody.
I've searched thru the forums and haven't been able to find the answer
I'm looking for. It's quite possible my question is a little wonky. I
opened a store last year and had to close it because my of moving. I want to
reopen it but not for everything that was previously listed.
Are storeroom items available for sale? If not, can I move selected items to
the storeroom and keep the listing in tact, for the future?
I have things in storage, and as I get them out, I would like to make them available
for sale, but I don't have it all out yet.
I will say, my brain thought this was a logical solution, but when I attempted
it, ALL my previously listed items showed up for sale and then I had to shut
it down again while I figure it out.
Hopefully, you knowledgeable friends can help me through this!!
Thanks....Pepper
|
|
| Author: | marc0044 | | Posted: | Mar 9, 2021 10:53 | | Subject: | nouveau set | | Viewed: | 71 times | | Topic: | Inventories | | Status: | Open | |
|
| transport gratui sur certain set ster wars ... 75244 , 75017 , et plus
a venir 75292 the mandolorian , 75300 the fighter imperial
|
| Author: | CSC | | Posted: | Mar 8, 2021 15:15 | | Subject: | Inventory details from a while back | | Viewed: | 36 times | | Topic: | Inventories | | Status: | Open | |
|
| Hi,
is there a way to get the inventory list from about 10 days ago from a store?
Thanks
|
| Author: | JoemamaBrickman | | Posted: | Mar 6, 2021 21:16 | | Subject: | Vidiyo minifigures inclusion | | Viewed: | 74 times | | Topic: | Inventories | | Status: | Open | |
|
| When will the new line of Vidiyo and its minifigs/ parts be added to the page?
Thus far there is no link, to my knowledge, to any product in this line.
|
| Author: | jviney | | Posted: | Mar 6, 2021 13:39 | | Subject: | Deleting inventory | | Viewed: | 61 times | | Topic: | Inventories | | Status: | Open | |
|
| | What is the easiest way to delete inventory from a stockroom? |
| Author: | amrondeau | | Posted: | Mar 4, 2021 11:36 | | Subject: | Vidiyo Minifigs | | Viewed: | 95 times | | Topic: | Inventories | | Status: | Open | |
|
| | Can the Vidiyo figures be added to the Minifig section? |
| Author: | LegoTaco2012 | | Posted: | Mar 3, 2021 13:17 | | Subject: | Please help clarify | | Viewed: | 67 times | | Topic: | Inventories | | Status: | Open | |
|
| So I am absolutely new to bricklink so If this is a dumb question answer it anyways,
please.
Am I correct in that I could build an inventory of all my Legos, and then from
that list see what sets I could build?
Sounds too good to be true.
|
|
| Author: | faro | | Posted: | Feb 27, 2021 18:53 | | Subject: | Can you see how many different parts you have | | Viewed: | 88 times | | Topic: | Inventories | | Status: | Open | |
|
| Hi Bricklinkers,
can you see the number of different parts you have on your inventory page.
At the moment I can see the lots and total parts number.
An example: You have 10 1x1 plates in black and 10 in blue, this means:
information 1: 2 lots
information 2: 20 parts
information 3: just 1 different part, just the 1x1 plates.
Can you see information number 3)?
Greets and thanks
Farid
|
| Author: | basil3legs | | Posted: | Feb 25, 2021 14:31 | | Subject: | Moving from Part Catalogue entry to Inventory | | Viewed: | 45 times | | Topic: | Inventories | | Status: | Open | |
|
| Is there a simple way of moving from the Catalogue entry for a Part to a search
of your inventory for that part?
|
| Author: | Heartbricker | | Posted: | Feb 25, 2021 11:00 | | Subject: | Why many shops fail at accuracy | | Viewed: | 260 times | | Topic: | Inventories | | Status: | Open | |
|
| With LEGO moving to utilize different sustainable raw materials: you will see
more sellers who rely on scales failing to provide accurate counts to customers.
Sellers should be mindful of that.
Example attached
|
|
| Author: | rbritton31 | | Posted: | Feb 17, 2021 13:36 | | Subject: | 42125 Inventory | | Viewed: | 47 times | | Topic: | Inventories | | Status: | Open | |
|
| I saw the inventory for Technic set 42125 as pending a week or so ago and now
it is back to N/A...how does that happen?
|
|
| Author: | ferfast | | Posted: | Feb 15, 2021 06:35 | | Subject: | Bricklink removing item from my inventory | | Viewed: | 133 times | | Topic: | Inventories | | Status: | Open | |
|
| I received an e-mail from Bricklink informing me that they had removed an item
on my selling list -I had posted a minifigure and specified that it does not
have a part i.e. a cape. Bricklink says the minifigure is incomplete so cannot
be listed to sell. How is this possible if many sets are sold incomplete, or
with variations -is it incorrect do sell an item without a part, even if I specifically
mention it on the listing? I checked and other stores are selling the same part,
also without the cape, so why only me?
|
|
| Author: | Brickyork | | Posted: | Feb 8, 2021 08:51 | | Subject: | Deleting Multiple Stockroom Items | | Viewed: | 44 times | | Topic: | Inventories | | Status: | Open | |
|
| Hi All,
Does anyone know of a way to delete multiple stockroom items without having to
tick the del box on each item?...I have over 4000 stockroom items and working
through that is going to drive me insane 
Thanks
Brick York
|
|
| Author: | Kenopolis | | Posted: | Jan 27, 2021 13:27 | | Subject: | Inventory search feature not working. | | Viewed: | 63 times | | Topic: | Inventories | | Status: | Open | |
|
| Could someone please explain why the inventory search functions are not working
correctly?
For example, I try to search for all items in my inventory that are in the stockroom
with 0 quantity, and it doesn't work.
Or if I try to search for items that have not sold in over 365 days, it also
doesn't work.
Both times, it just says Loading inventory data.
I am using the latest version of Chrome.
|
|
| Author: | AlterEgo | | Posted: | Jan 26, 2021 08:44 | | Subject: | create inventory as a non seller | | Viewed: | 80 times | | Topic: | Inventories | | Status: | Open | |
|
| Is it possible to create an inventory for technic set I own and ceep the status
of a non seller?
As I have quite a few technic sets I would like to know which parts I have got,
complare them with MOC-Brick-Lists to evaluate which bricks / parts I need to
buy.
If that is not possible: Is there a software, which enables me to record my LEGO
invenroy,Create an XML to do an evaluation of missing parts?
|
|
| Author: | Janettoe | | Posted: | Jan 25, 2021 19:13 | | Subject: | How to id bricks of different ages/fonts | | Viewed: | 118 times | | Topic: | Inventories | | Status: | Open | |
|
| I recently bought a Lego lot. Some of the Lego is old (1960? 1970?). The main
difference is the font used or the orientation of the writing on bricks 2x3
and larger (I have five different versions compared to present day Lego). My
question is. Can you help me determine which font/brick is from what years? It
probably doesn't make much difference but I am curious. I would like to list
them based on their age, as some buyers may want older bricks for older sets.
Here are the descriptions of the differences between each block. Left to right...
#1
Small writing, a different kind of plastic (lighter feeling and the red is lighter
red) the G is kind of squarish and there is more space between the L and E and
G in other versions 1 x 2 are hollow. Pat. Pend inside bricks
#2
Open "O" on the word Lego. Heavier plastic and the red is darker (closer to the
present day red). 1 x 2 are hollow. The light gray plates have circles on the
bottom, not waffle. Pat. Pend inside bricks.
#3
Writing is in a different direction on larger bricks (2 x 3 and larger) horizontal
vs. vertical. 1 x 2 bricks are hollow. Pat. Pend inside bricks.
#4 writing is smaller than #5, and #5 the printing is a little smaller than present
day. Pat Pend inside bricks.
#5 Printing on studs is a little larger than #4, but small than new bricks. Pat
Pend inside bricks.
#6 New brick.
|
|
|
| Author: | Murmys | | Posted: | Jan 24, 2021 18:57 | | Subject: | download inventory | | Viewed: | 47 times | | Topic: | Inventories | | Status: | Open | |
|
| Can anyone tell me how to download my inventory to Excel so I can use it to double
check my count on each item?
|
| Author: | mhortar | | Posted: | Jan 24, 2021 16:17 | | Subject: | Auditt-1 question | | Viewed: | 90 times | | Topic: | Inventories | | Status: | Open | |
|
| I recently purchased a sealed
The box looks legit, the parts are in a sealed bag with a LEGOLAND DE sticker
on it, so everything seems good up to that point. Except one thing.
The parts for the car are blue. Not red.
I tried checking Brickset and here to see if there was an inventory note of the
car being available in different colors, but I couldn't find anything.
Has anyone else come across this before?
Josh
|
|
| Author: | dannyweezing | | Posted: | Jan 24, 2021 09:58 | | Subject: | 70810 MetalBeard's Sea Cow | | Viewed: | 54 times | | Topic: | Inventories | | Status: | Open | |
|
| I have noticed while inventorying this set that all the parts with stickers are
not listed in the counterparts. I am missing a couple sticker pieces, but without
them being listed, it seems they are not able to be listed for sale in stores,
and therefore I can't find them for purchase. Can anyone assist in fixing
this?
|
|
| Author: | BarbaraH | | Posted: | Jan 21, 2021 08:50 | | Subject: | Unidentified pieces | | Viewed: | 90 times | | Topic: | Inventories | | Status: | Open | |
|
| I have a number of pieces from set 75890 (Ferrari F40) with the stickers on (4
x 2 red tile, 1 x 2 red tiles, 1 x 6 red tile, 1 x 2 red curved slopes, 2 x 2
red curved slopes, 1 x 4 slopes)
I can't find any of these in the relevant catalogue entries to enable me
to add them to my inventory. Is there any way round this?
Thanks
|
|
| Author: | InsanityBeckonz | | Posted: | Jan 19, 2021 09:39 | | Subject: | Missing sticker parts - set 60102 Airport VIP | | Viewed: | 37 times | | Topic: | Inventories | | Status: | Open | |
|
| Hi,
I'm missing parts with stickers to complete set 60102, but they are not registered
yet on BL. If you happen to have this set, would you take the time to complete
it? Or alternatively get in touch to upload the photos if I create the missing
sticker parts?
Thank you.
|
| Author: | XMetaldethX | | Posted: | Jan 19, 2021 00:37 | | Subject: | 8097 inventory problem | | Viewed: | 61 times | | Topic: | Inventories | | Status: | Open | |
|
| | Set 8097 Has 4 dark bluish grey 1 x 10 should have 2 1 x 16. |
| Author: | Lego_My_Waffle | | Posted: | Jan 17, 2021 04:15 | | Subject: | Can Sets and Minifigs be Listed Twice? | | Viewed: | 81 times | | Topic: | Inventories | | Status: | Open | |
|
| For lego sets that I'm selling, is there anyway to connect the minifigs to
the set? What I'm look for is a way to list a set as sealed while also listing
the minfigs, so that someone could either buy the set whole or someone could
purchase the minfigs in which case I'll open the box and sell them.
Is this possible? Or do I have to choose whether to list either the whole set
or the minfigs it comes with?
|
|
| Author: | porscheman57 | | Posted: | Jan 16, 2021 11:57 | | Subject: | This Item is similar in mold type to the foll | | Viewed: | 69 times | | Topic: | Inventories | | Status: | Open | |
|
| Good morning all,
I would like to know what means (This Item is similar in mold type to the following
Item (s))?
Here is my problem, in some Star Wars figurines a Blocked Open Stud head and
there is (This Item is similar in mold type to the following Item (s) in Hollow
Stud.
Does that mean that the figurine came out with these two kinds of heads at random?
For Ex: See Sw0354.
Thank you in advance for your answers and explanations.
cordially
Xavier
|
|
| Author: | magicalbricks24 | | Posted: | Jan 14, 2021 16:58 | | Subject: | 98835pb022 | | Viewed: | 69 times | | Topic: | Inventories | | Status: | Open | |
|
| Hello, could somebody please change the 98835pb022 part to be listed under counterparts
in set 41288 (Mojo Jojo Strikes)? Thanks!
|
| Author: | rbritton31 | | Posted: | Jan 14, 2021 09:21 | | Subject: | Is it possible | | Viewed: | 173 times | | Topic: | Inventories | | Status: | Open | |
|
| Is it possible to part out sets to your stockroom and when you take the parts
out of stockroom have them combine to parts you already have listed without making
2 listings for parts you already have. I want to do the computer work first before
I do the physical work but not if is going to give me for example listings for
2 sets of black technic pins, blue technic axle pins, etc.
|
|
| Author: | Bromwich | | Posted: | Jan 14, 2021 07:01 | | Subject: | 30kg Bulk buy of 90's Lego - what to do | | Viewed: | 150 times | | Topic: | Inventories | | Status: | Open | |
|
| Hi everyone,
This is my first post on here, so apologies if I get the format wrong.
I recently won a large lot of loose Lego at auction, (for too much money), and
have been working my way sorting through it all.
What hooked me was that it came with 30+ instruction sheets, all from the late
80's and early 90's, plus the box for 6542 Launch and Load and 6286 Pirate
Schooner.
Having now spent a couple of surprisingly enjoyable weeks cleaning and picking
out bits, I have 21 near complete sets (minus any Minifigures), but also normally
missing a couple of special pieces.
My question is - What should I do with it now?!
should I (A) looking to buy all of the missing parts (currently 215, inc. minifigs
across 21 sets) to complete the set and sell as 100% complete.
Overall it seems that I need to spend 25-35% of the set selling price to complete.
Or (B) part out and save myself the time of buying the parts to sell them on?
Part of me feels that it would be nice to complete them, but it will also take
a lot longer to get things up and running.
Note - given their age there are also a fair few discoloured parts which I would
want to de-yellow before selling.
All lot of the left over basic part will just join my son's collection.
Any advice would be great.
Thanks,
P.S. Not sure what happened to the photos flipping!
|
|
|
| Author: | Chee_ching | | Posted: | Jan 13, 2021 17:24 | | Subject: | 51515 ready for approval | | Viewed: | 65 times | | Topic: | Inventories | | Status: | Open | |
|
| Dear Team,
I have completed the inventory compilation for set 51515. Please review and provide
approval.
|
|
| Author: | iprice | | Posted: | Jan 13, 2021 11:48 | | Subject: | Mixture of old and new dark (bluish) grey | | Viewed: | 81 times | | Topic: | Inventories | | Status: | Open | |
|
| I've just pulled apart a set (#4495 - Star Wars AT-TE Mini) that I purchased
my self, many years ago, which has been in sealed storage in my loft pretty much
since I first assembled it.
I noticed that several parts were old dark grey while the majority were dark
bluish grey.
I checked the inventory and found that all parts should have been dark bluish
grey. There was no mention of old dark grey parts.
These parts (2* 1x4 plate and 6* Hinge Plate 1 x 2 Locking with 1 Finger On Top)
are definitely old dark grey. They are not sun damaged or faded; they are full
and evenly coloured top, bottom and sides. Also no other colour parts are affected.
So
1) Is this unusual?
2) Can the Inventory reflect that this set may have old dark grey alternative
parts.
|
|
| Author: | keithmcgibbon | | Posted: | Jan 13, 2021 08:50 | | Subject: | Parts list by LEGO instruction Bag | | Viewed: | 51 times | | Topic: | Inventories | | Status: | Open | |
|
| Hi,
I am building The big Millenium Falcon and want to sort the parts into bags as
they appear in the instructions. I can see the inventory for the total build,
but it would make building easier if I could sort the parts into the same bags
they come is as new. Does anyone have any suggestions for where I could get
parts list arranged this way?
thanks
|
|
| Author: | OldButGoodie | | Posted: | Jan 11, 2021 06:41 | | Subject: | Factory-packed instructions for modulars set. | | Viewed: | 73 times | | Topic: | Inventories | | Status: | Open | |
|
| I have a question, maybe someone knows some rule.
In the past, modular instructions were wrapped in foil sealed with a seal.
What does the number on the seal mean?
For some time now, the instructions have been wrapped in heat-sealed foil in
modulars.
Do you know what was the packing version of the instruction for 10211?
|
| Author: | tEoS | | Posted: | Jan 4, 2021 22:33 | | Subject: | Double figure in advent | | Viewed: | 106 times | | Topic: | Inventories | | Status: | Open | |
|
| I don't buy the advents often, even though I think the trays are really nice.
Today, I splurged for the Star Wars and Harry Potter advents and received a
duplicate figure.
It was a nice surprise. 2x of this in one set:
|
|
| Author: | jasonpenn | | Posted: | Jan 1, 2021 23:23 | | Subject: | Reverse Part out? | | Viewed: | 122 times | | Topic: | Inventories | | Status: | Open | |
|
| Hey everyone,
I feel like this was a thing and now I can't figure it out. Is there a way
to part out a set from my inventory? Case in point, I'm looking at the part
out value for and I already have about 5k of the pieces in inventory.
Is there a way to take all of those pieces out of my inventory with a reverse
part out?
Thanks in advance!
Jason
|
|
| Author: | Erikschoneveld | | Posted: | Dec 29, 2020 14:22 | | Subject: | Sets inventories adding | | Viewed: | 56 times | | Topic: | Inventories | | Status: | Open | |
|
| Is it possible to put a inventorie from a set in one click to my store. I always
have a lot of work to put my pieces to my site. So I hope there is a quick way
to do it. I hope that somebody from Holland will tell me how to do it in dutch.
|
|
| Author: | bengreen28 | | Posted: | Dec 29, 2020 06:20 | | Subject: | Item delete request back into inventory | | Viewed: | 58 times | | Topic: | Inventories | | Status: | Open | |
|
| I have just had to remove a load of items off an order as the buyer didn't
want them anymore.
I submitted the requests and the buyer has approved the request to remove them.
How do I go about getting them added back into my store? reading the instructions
it says that if the buyer submitted the request and the seller agrees then they
will be added back.
I can't seem to find anything about adding them from the other way around.
It seems I now have to add each part and quantity by hand is that the case?
|
|
| Author: | TempleOfBricks | | Posted: | Dec 24, 2020 13:14 | | Subject: | Remarks using Brickstock | | Viewed: | 98 times | | Topic: | Inventories | | Status: | Open | |
|
| Somehow can't update my remarks using Brickstock
example:
If i ONLY change my remarks and update it to Bricklink it does not work, change
pricing however in Brickstock and then update works flawless...
any solutions?
greetz Alexander
|
|
| Author: | wyvern | | Posted: | Dec 16, 2020 20:26 | | Subject: | Polybag Inside Box? | | Viewed: | 90 times | | Topic: | Inventories | | Status: | Open | |
|
|
Looking at the listings, some sellers provided their own pictures which show
a polybag in addition to the box. It looks like the polybag could stand on its
own without the box, even having the set number on it. I would think it's
easier to ship/distribute and save on packaging if the box wasn't included.
Why would Lego double-package it like that? Did they used to do this for all
of the small sets?
|
|
| Author: | wittco | | Posted: | Dec 16, 2020 00:01 | | Subject: | Instrctions and/or Inv for Certified Pro Set | | Viewed: | 62 times | | Topic: | Inventories | | Status: | Open | |
|
| Hi All:
Anyone have any suggestions on where I can find set instructions and or an inventory
for a Certified Professional Lego Set I acquired. It's a model of a Snap
On Tool Roll Cart (KRL7022). I don't know if Bricklink allows the sale of
these "approved" sets on Bricklink.Thanks!
|
| Author: | SetsetBricks | | Posted: | Dec 15, 2020 08:18 | | Subject: | mixed 32064 and 32064b | | Viewed: | 74 times | | Topic: | Inventories | | Status: | Open | |
|
| Hello
I have 32064 parts and I have 2 version of parts
let me explain
on a part 32064 face A it is the 32064 but on the face B it is a 32064b
have you ever seen this?
and how do you go about selling it?
in reference?
|
| Author: | CrazyChris | | Posted: | Dec 13, 2020 06:42 | | Subject: | Why new inventories not directly from Lego? | | Viewed: | 105 times | | Topic: | Inventories | | Status: | Open | |
|
| As we all know, Bricklink was bought by Lego Company a while ago.
So, I am wondering, why does it take so long ("inventory pending") until the
inventories of new sets are online here at Bricklink? What's the problem
to take them directly from the mother company and put them online from release
day #1?
|
|
| Author: | Keledeb | | Posted: | Dec 8, 2020 05:36 | | Subject: | Softball/baseball ball reference | | Viewed: | 83 times | | Topic: | Inventories | | Status: | Open | |
|
| Hello everybody,
First post here for me.
I have this ball for ten years and I begun a mass invetory of my collection and
stamble on this item. I have no idea where it comes from as I didn't found
any reference on bricklink or internet...You guys have any idea of where it was
given or sold ?
Thank you and have a nice day
Eric
|
|
| Author: | Gaston.La.Brick | | Posted: | Dec 6, 2020 10:12 | | Subject: | Mass update inventory: dimension | | Viewed: | 37 times | | Topic: | Inventories | | Status: | Open | |
|
| I want to mass update the dimensions of the minifigs in my inventory.
Is it possible using the BrickLink user interface? Or should I look into a solution
using inventory download, adjusting the fields on my computer and re-upload the
inventory?
|
| Author: | kcanavan | | Posted: | Dec 5, 2020 12:05 | | Subject: | Alternate Items question | | Viewed: | 46 times | | Topic: | Inventories | | Status: | Open | |
|
| Hi, a bit new to BrickLink so wondering on an inventory list for a set, if a
different color appears in the “alternate items” section, does that mean that
when the set was originally purchased, that it could have included alternate
items (like color) in the set purchased?
|
|
| Author: | jedvii | | Posted: | Dec 4, 2020 14:56 | | Subject: | 3069bpc1 in set 21324 is incorrect | | Viewed: | 58 times | | Topic: | Inventories | | Status: | Open | |
|
| There is a 3069bpc1 in Dark Bluish Gray in the Sesame Street set #21324. I am
parting one out and I don't have a 3069bpc1 in DBG, but do have a different
1x2 tile with a similar print in LIGHT bluish Gray. I'm attaching a picture
of it here. Can someone change the set and/or verify that the 3069bpc1 in DGB
is NOT in the set? I couldn't find a part that matched the piece I have.
If it is a new piece, you can use my picture if needed.
-jed
|
|
|
| Author: | inazuma | | Posted: | Dec 1, 2020 11:12 | | Subject: | Inventory for set 4002018 | | Viewed: | 55 times | | Topic: | Inventories | | Status: | Open | |
|
| Hello!
I submitted an inventory for the set 4002018 almost a year ago, and it is still
waiting for approval. Do you have any updated information about the process?
I also provided a scan of the instructions part list.
Thank you!
Szilard
|
| Author: | Niels_T | | Posted: | Nov 30, 2020 06:35 | | Subject: | Looking for admin help with the 080 set | | Viewed: | 83 times | | Topic: | Inventories | | Status: | Open | |
|
| I'm not so good at this inventory stuff so if an admin would help it would
be very helpfull.
There are muliple mistakes in the inventory for set 080-1 Basic Building Set
with Train.
Reason for so many mistakes are that some of the instructions are on the trays
inside the box.
BR
Niels
|
| Author: | Brick_Arena | | Posted: | Nov 29, 2020 05:55 | | Subject: | Anyone have Bricksync 1.7.1 for Mac | | Viewed: | 43 times | | Topic: | Inventories | | Status: | Open | |
|
| Hi, Just wondered if anyone had a compiled version of Bricksync 1.7.1 for Mac
they would be willing to share.
Thanks in advance.
|
| Author: | darkrix | | Posted: | Nov 28, 2020 05:10 | | Subject: | looking for set containing | | Viewed: | 87 times | | Topic: | Inventories | | Status: | Open | |
|
| I am searching sets which contain a part that is n'ont références in database.
It's a part like 57029c01 but colored in peuple with a little black part.
On thé part it's written Lego 1-01 32074
|
| Author: | maxx3001 | | Posted: | Nov 26, 2020 16:08 | | Subject: | Set 030-1 | | Viewed: | 70 times | | Topic: | Inventories | | Status: | Open | |
|
| There is at least one mistake made in a pending set.
All the 2x4 bricks need to be 3001old instead of 3001.
No idea where or how to change this.
Maxx
|
| Author: | C0lsanders_ | | Posted: | Nov 26, 2020 13:37 | | Subject: | Sort / view my inventory | | Viewed: | 58 times | | Topic: | Inventories | | Status: | Open | |
|
| Going through my inventory, doing some stuff, and I notice that it is sorting
things differently than it has in the past. I think it is sorting it by lot ID,
rather than by color or brick, etc. How/where do I change it?
Thanks,
Miles (C0lsanders_)
|
| Author: | Technicology | | Posted: | Nov 26, 2020 13:33 | | Subject: | Remarks | | Viewed: | 70 times | | Topic: | Inventories | | Status: | Open | |
|
| Help!
A lot of my remarks have disappeared!!??..
Parted out 2 x 21319 sets in normal way,started to put parts away and all locations
in remarks have gone!..
For info I use Brick Freedom to sync..Could this be the issue?..
Is there any way to restore all the values?
Causing me a huge headache!
|
| Author: | Lulumika | | Posted: | Nov 26, 2020 13:02 | | Subject: | Stockroom | | Viewed: | 66 times | | Topic: | Inventories | | Status: | Open | |
|
| Hi there,
Is there are shortcut to where I can look at the Stockroom? I am confused (after
9 years of doing this) where the stockroom is.
Thanks,
M.
|
|
| Author: | Ninepartsred | | Posted: | Nov 21, 2020 15:39 | | Subject: | Alternate heads | | Viewed: | 88 times | | Topic: | Inventories | | Status: | Open | |
|
| TL;DR version - do the rules about incomplete minifigs also cover substitutions?
I.e. a head that has the same print but a different stud.
Long version - I bought a collection from a family who I know and trust. One
of the sets is an opened but complete
The inventory says the minifigs should have type C blocked open stud heads but
3 of them have type B hollow stud heads.
There aren't any which is supposedly the only one with a type
B head.
I've seen some inventories with a note to say that both stud types have been
found in a particular set or minifigure.
Substitutions, as well as incomplete minifigs, are a pet peeve, and I don't
want to list them if they break the rules. Should I request that the alternate
head be noted in the inventory or should the catalog be updated so that the type
B head is associated with both minifigs?
|
|
| Author: | Trusconi | | Posted: | Nov 21, 2020 11:51 | | Subject: | Lego House set list | | Viewed: | 69 times | | Topic: | Inventories | | Status: | Open | |
|
| Hello,
Is there someohe that know how many differenti set have bene made with "Lego
House* logo on the Box?
I mean for example 40501, Pick a brick Butterfly, build your MEAL, etc
Here Is what i found:
Set Ufficiali
40295 Chef 2017
40296 Meal 2017
40297 Duplo 2017
40356 Chef 2019
40366 Dinosaurs 2019
40501 Duck 2020
624210 Bricks 2017
4000010 House 2014
4000026 Tree 2018
6168271 LHPO 2017 (600)
LHGO LHGO 2107 (3500)
Set correlati ma non House
21037 House 2017
4000016 Airport 2014
40199 Airport 2018
Portachiavi
853711 Boy key chain 2017
853712 Brick key chain 2017
853713 Girl key chain 2017
854014 Women key chain 2020
Pick a Brick
3850060 Fish tank 1 2017
3850061 Fish tank 2 2017
3850072 Butterfly 2019
Rarità
6232682 Kladno Employee ??? (100)
Gadget
854915 Magnet 2020
853709 MUG 2020
853957 Borraccia 2020
5005423 T-shirt ???
Thank you
Manu
|
|
| Author: | infinibrix | | Posted: | Nov 13, 2020 07:29 | | Subject: | Minifigue Complete Build Inconsistencies? | | Viewed: | 209 times | | Topic: | Inventories | | Status: | Open | |
|
| Whilst I’m sure we all understand and appreciate that minifigs have to be listed
as per the instructions and whilst for the most part this might be a good guideline
to follow can we not also try and gauge what we feel the majority of the community
would consider more fitting as a complete minifigure along with what might be
considered unnecessary as part of a complete minifigure?
For instance we have Oscar the Grouch in his trash can marked for deletion??
To be replaced with this:-
I’m not sure anyone would consider the newer entry complete for instance would
anyone actually display the Oscar minifig without the trash can either way the
instructions point to the parts being arrow directed down into the trash can
anyway?
Then compared with these minifigs that have non-essential accessories:-
The yoda has a part only useful with the actual build and if you want Jay In
his kimono outfit you have to specifically purchase him with the multiple part
jet pack whilst the other ninja characters in matching outfits are sold standalone
as should be the same for all?
I’m then confused further as we have Ghostbusters characters in the catalog with
and without their proton packs so are they supposed to be fully accessorised,
barebone or a mix of both, which is it?
To be honest I like the two options given for the Ghostbusters minifigs and whilst
the majority of minifgs should only have one entry I think it would make sense
to have two entries for certain minifigs like the Jay without jetpack and other
minifigs like this one with an option to buy with and without a backpack:-
|
|
| Author: | bb1236406 | | Posted: | Nov 9, 2020 08:25 | | Subject: | 853-1 Auto Chassis missing brick | | Viewed: | 83 times | | Topic: | Inventories | | Status: | Open | |
|
| Hello,
I was checking the 853-1 instrunction and I noticed that on the front seat image
there was an 1x5 brick!
So I think there is a mistake in this image.
Has anyone noticed that?
|
|
|
| Author: | Bond | | Posted: | Nov 8, 2020 17:23 | | Subject: | 10717-1 vs 11717 Question | | Viewed: | 67 times | | Topic: | Inventories | | Status: | Open | |
|
| Is the only difference between and four of these (and not
Light Aqua; that's the default image)?
I can see that, in 11717-1 inventory, four 91405 (one Bright Green, one Dark
Tan, one Medium Azure, and one White) are listed. All I want to know is if all
the remaining contents are the exact same as those found in 10717-1.
-------------------
Right now, Wal-Mart has the 11717 for $39.99. Not a bad deal, especially when
you consider that you had to be a CostCo member last year to get a 10717-1 for
the same price, and without any 91405.
Regards,
- Pat
|
|
| Author: | Ninepartsred | | Posted: | Nov 7, 2020 13:34 | | Subject: | Iron Man thrusters/repulsors | | Viewed: | 57 times | | Topic: | Inventories | | Status: | Open | |
|
| I know there have been several discussions about what constitutes a minifig and
I'm sure this must have been brought up before, but in the inventories for
a "complete" Iron Man, Legion, Ultron, etc., why are the bricks round included
for the feet but not the plates for the hands?
Those parts are included in but even on the box, Ultron isn't
shown using his thrusters, he's sitting on his shiny metal backside.
Those on the hands are shown in place in the images for most sets and could be
considered more important as they're also used as weapons but they're
not included. Personally, I wouldn't include either of them as they're
really added effects.
|
|
| Author: | Kathleen_55 | | Posted: | Nov 3, 2020 22:06 | | Subject: | Items moved from A-B | | Viewed: | 84 times | | Topic: | Inventories | | Status: | Open | |
|
| I've noticed items that are being moved from one category to another. Is
there a list that I can use because I'm finding it very time consuming hunting
for the product in a order. Please and thank you. Kathleen
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
New Zealand, Auckland
Germany, Hessen
Canada, Ontario
USA, South Carolina
Netherlands, Gelderland
France, Grand Est
Slovenia
United Kingdom, England
Greece, Central Macedonia
United Kingdom, Scotland
Austria, Oberösterreich
Australia, Queensland
Finland, Varsinais-Suomi
Portugal
Norway, Oslo
)
)
)
)
)
Singapore
Poland, w. Pomorskie
Switzerland, Vaud
)
)
)
)
Belgium
Hungary, Zala
Denmark
Italy, Lombardia
