Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | go4bob | Posted: | Oct 7, 2017 23:18 | Subject: | Inventory Change Request for Set 6330-1 | Viewed: | 24 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 4073 Black Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 4592c02 White Lever Small Base with Black Lever (Extra)
* Add 2 Part 3742 Yellow Plant Flower Small (Extra)
|
|
Author: | Lwiigi | Posted: | Oct 7, 2017 21:09 | Subject: | Inventory Change Request for Set 6669-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 4 Part Light Gray {4085b Plate, Modified 1 x 1 with Clip Vertical - Type 2 (thin U clip) to 4085c Plate, Modified 1 x 1 with Clip Vertical - Type 3 (thick U clip)}
Comments from Submitter:
Item shown in instructions is 4085a (not 4085b), actual item is 4085c. Source: I own the set.
|
|
Author: | StormChaser | Posted: | Oct 7, 2017 16:57 | Subject: | Inventory Change Request for Set 31070-1 | Viewed: | 25 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 4265c Yellow Technic Bush 1/2 Smooth (Extra)
* Add 1 Part 4592c02 Blue Lever Small Base with Black Lever (Extra)
* Add 1 Part 2780 Black Technic, Pin with Friction Ridges Lengthwise WITH Center Slots (Extra)
* Add 1 Part 4599b Red Tap 1 x 1 without Hole in End (Extra)
* Add 1 Part 85861 Light Bluish Gray Plate, Round 1 x 1 with Open Stud (Extra)
* Add 1 Part 18654 Flat Silver Technic, Pin Connector Round 1L (Extra)
* Add 1 Part 4073 Trans-Light Blue Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 4073 Dark Bluish Gray Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 3024 Trans-Orange Plate 1 x 1 (Extra)
* Add 1 Part 3024 Black Plate 1 x 1 (Extra)
* Add 1 Part 3024 Blue Plate 1 x 1 (Extra)
* Add 1 Part 3070b White Tile 1 x 1 with Groove (Extra)
* Add 1 Part 3070b Blue Tile 1 x 1 with Groove (Extra)
* Add 1 Part 3070b Medium Azure Tile 1 x 1 with Groove (Extra)
* Add 1 Part 98138 Trans-Clear Tile, Round 1 x 1 (Extra)
* Add 1 Part 98138 Light Bluish Gray Tile, Round 1 x 1 (Extra)
* Add 1 Part 98138 Trans-Orange Tile, Round 1 x 1 (Extra)
* Add 1 Part 98138 Trans-Red Tile, Round 1 x 1 (Extra)
* Add 1 Part 54200 Dark Bluish Gray Slope 30 1 x 1 x 2/3 (Extra)
* Add 1 Part 54200 Trans-Clear Slope 30 1 x 1 x 2/3 (Extra)
* Add 1 Part 54200 Blue Slope 30 1 x 1 x 2/3 (Extra)
* Add 1 Part 54200 White Slope 30 1 x 1 x 2/3 (Extra)
* Add 1 Part 54200 Medium Azure Slope 30 1 x 1 x 2/3 (Extra)
* Change 1 Part Orange 96874 Human Tool, Brick and Axle Separator {Extra to Regular}
Comments from Submitter:
Extras found in sealed set.
|
|
Author: | Lwiigi | Posted: | Oct 7, 2017 16:36 | Subject: | Inventory Change Request for Set 6646-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 4 Part Light Gray {4085b Plate, Modified 1 x 1 with Clip Vertical - Type 2 (thin U clip) to 4085c Plate, Modified 1 x 1 with Clip Vertical - Type 3 (thick U clip)}
Comments from Submitter:
Item shown in instructions is 4085b, actual item is 4085c. Source: owner, and many photos on the Internet.
|
|
Author: | electricbaer | Posted: | Oct 7, 2017 12:18 | Subject: | Inventory Change Request for Set 4436-1 | Viewed: | 17 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 30413pb061 Blue Panel 1 x 4 x 1 with White 'POLICE' Bold Narrow Font Small on Blue Background Pattern (Sticker) - Set 4436 (Counterpart)
|
|
Author: | electricbaer | Posted: | Oct 7, 2017 12:17 | Subject: | Inventory Change Request for Set 75021-1 | Viewed: | 28 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3678bpb104R White Slope 65 2 x 2 x 2 with Bottom Tube with SW Republic Gunship Pattern Model Right Side (Sticker) - Set 75021 (Counterpart)
* Add 1 Part 3678bpb104L White Slope 65 2 x 2 x 2 with Bottom Tube with SW Republic Gunship Pattern Model Left Side (Sticker) - Set 75021 (Counterpart)
* Add 2 Part 60477pb011R White Slope 18 4 x 1 with Bright Light Orange Triangle on White Background Pattern Model Right Side (Sticker) - Set 75021 (Counterpart)
* Add 2 Part 60477pb011L White Slope 18 4 x 1 with Bright Light Orange Triangle on White Background Pattern Model Left Side (Sticker) - Set 75021 (Counterpart)
|
|
|
Author: | mandr | Posted: | Oct 7, 2017 11:34 | Subject: | Re: Reduce Store Verification Time | Viewed: | 35 times | Topic: | Suggestions | |
|
| In Suggestions, redimension writes:
| Team,
I have been waiting to open my store for over a month. I am more than ready to
start selling. Do you need help in this department? Volunteers to assist in matters
like this?
Cheers!
|
From what I understand, if you upgrade from a buyer to a seller and if you are
a member in good standing (active 100 days and received 5 positive feedback),
then opening the store is automatically allowed.
You are a member in good standing, but you were not at the time that you tried
to upgrade as you just got the feedback last week. If I were you, I'd send
another email to Admin to try to kick-start the process again, perhaps with attention
to Jaclyn. For you it shouldn't take so long to open at this point, but
because you arrived at this point in a different way, it may unfortunately be
as MariaA says, take a few weeks. Hopefully not though. Good luck.
If you are selling parts, it might be helpful to include a shipping chart and
a few more details in your terms to help encourage buyers. I'm not in the
US, but I got the impression from buying in the US that there are shipping categories.
|
|
Author: | Ariule | Posted: | Oct 7, 2017 10:31 | Subject: | Search vs Item Finder & New Style pages | Viewed: | 38 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| For many years, I have used the "Item Finder" instead of "Search" at the top
of most pages as I find the functionality better, specifically for filtering
the country of origin of seller.
I again find the "new" search pages not as helpful. I click on "USA" for origin,
then click details, and it shows all parts, not just the sellers in "USA" for
example.
I wanted to pass along this user feedback and see if anyone else has easier and
better ways to find parts. I do not see the "Item Finder" on the new pages,
and suggest that it remain.
Ariule
|
|
Author: | MadiganStation | Posted: | Oct 7, 2017 09:00 | Subject: | Re: Reduce Store Verification Time | Viewed: | 34 times | Topic: | Suggestions | |
|
| In Suggestions, qwertyboy writes:
| Specifying a password there does not keep a store locked. We have a password
there, but our store is open. They specifically said that the "open" button did
not work.
Nick.
|
Removed the password, and still locked.
Nate
|
|
Author: | qwertyboy | Posted: | Oct 7, 2017 08:35 | Subject: | Re: Reduce Store Verification Time | Viewed: | 28 times | Topic: | Suggestions | |
|
| In Suggestions, Brickwilbo writes:
| In Suggestions, MarieA writes:
| In Suggestions, redimension writes:
| Team,
I have been waiting to open my store for over a month. I am more than ready to
start selling. Do you need help in this department? Volunteers to assist in matters
like this?
Cheers!
|
The process takes approx. two weeks after you complete the necessary steps. You
only completed at least two of those steps two days ago. You've been waiting
a month only because you didn't thoroughly read the information. I agree
the process could be simpler, but the information is there and simply needs to
be given the appropriate attention.
A better suggestion might be for BL to create an unambiguous list of things a
new store needs to do, with green ticks generated automatically against each
item as they're completed, with a "submit for review" button only available
after all other steps have been ticked off.
|
Agreed. All the information is there.
We've three people not understanding which settings to use.
They'd entered an unnecessary Store bypassword which keeps their stores locked.
|
Specifying a password there does not keep a store locked. We have a password
there, but our store is open. They specifically said that the "open" button did
not work.
Niek.
|
|
Author: | lumicrro | Posted: | Oct 7, 2017 07:22 | Subject: | Inventory Change Request for Set 670-1 | Viewed: | 16 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 3062b Trans-Yellow Brick, Round 1 x 1 Open Stud
* Delete 1 Part 3062b Light Gray Brick, Round 1 x 1 Open Stud
Comments from Submitter:
Should be closed top, not open stud. It is clear in the instructions
|
|
Author: | Brickwilbo | Posted: | Oct 7, 2017 01:23 | Subject: | Re: Reduce Store Verification Time | Viewed: | 43 times | Topic: | Suggestions | |
|
| In Suggestions, MarieA writes:
| In Suggestions, redimension writes:
| Team,
I have been waiting to open my store for over a month. I am more than ready to
start selling. Do you need help in this department? Volunteers to assist in matters
like this?
Cheers!
|
The process takes approx. two weeks after you complete the necessary steps. You
only completed at least two of those steps two days ago. You've been waiting
a month only because you didn't thoroughly read the information. I agree
the process could be simpler, but the information is there and simply needs to
be given the appropriate attention.
A better suggestion might be for BL to create an unambiguous list of things a
new store needs to do, with green ticks generated automatically against each
item as they're completed, with a "submit for review" button only available
after all other steps have been ticked off.
|
Agreed. All the information is there.
We've three people not understanding which settings to use.
They'd entered an unnecessary Store bypassword which keeps their stores locked.
|
|
Author: | pzielak | Posted: | Oct 7, 2017 00:15 | Subject: | Inventory Change Request for Set 60022-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 30413pb060R Yellow Panel 1 x 4 x 1 with Red and White Danger Stripes Pattern Right (Sticker) - Set 60022 (Counterpart)
* Add 1 Part 4150pb183 Red Tile, Round 2 x 2 with White Curved Arrow Double on Red Background Pattern (Sticker) - Set 60022 (Counterpart)
|
|