Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | utm1996  | | Posted: | Apr 27, 2023 19:54 | | Subject: | Studio not retaining login information | | Viewed: | 42 times | | Topic: | Related Software | |
|
| Every time I start the Studio program I have to re-login despite checking the
"remember me" box. It doesn't matter if it's 5 minutes after
or a day after, it's the same issue.
Any thoughts?
|
 |
| Author: | macebobo | | Posted: | Apr 23, 2023 20:09 | | Subject: | Re: Brickstore question | | Viewed: | 42 times | | Topic: | Related Software | |
|
| In Related Software, 1001bricks writes:
| | In Related Software, macebobo writes:
| | Is it possible, in Brickstore, to compare one field to another?
E.g. when filtering, I would like to see if I my cost is greater than my price.
|
I don't think so.
You can open an Issue to ask for this development.
Alternatively you could save as XML, then open in Excel (or using Power Query),
etc.
A bit complicated but would work.
|
Thanks Sylvain. I do something similar now, I was just hoping there would be
some magic way to do this in Brickstore. I am on the windows 7, no updates version,
so it would be superfluous to ask for this feature since I would not be able
to use it.
-- John
|
|
| Author: | 1001bricks | | Posted: | Apr 23, 2023 17:23 | | Subject: | Re: Brickstore question | | Viewed: | 32 times | | Topic: | Related Software | |
|
| In Related Software, macebobo writes:
| | Is it possible, in Brickstore, to compare one field to another?
E.g. when filtering, I would like to see if I my cost is greater than my price.
|
I don't think so.
You can open an Issue to ask for this development.
Alternatively you could save as XML, then open in Excel (or using Power Query),
etc.
A bit complicated but would work.
|
| Author: | macebobo | | Posted: | Apr 23, 2023 13:54 | | Subject: | Brickstore question | | Viewed: | 91 times | | Topic: | Related Software | |
|
| Is it possible, in Brickstore, to compare one field to another?
E.g. when filtering, I would like to see if I my cost is greater than my price.
Thank you.
|
|
| Author: | Stellar | | Posted: | Apr 7, 2023 05:40 | | Subject: | Re: Brick Seller App - Brickognize Integration | | Viewed: | 37 times | | Topic: | Related Software | |
|
| In Related Software, crxefx writes:
| | Never heard of brick seller but, found Brickognize a few weeks back (Thank you
to whoever mentioned this in the forum)! Best tool I've found to date for
figuring out parts. I'm thinking of repurposing a Pi4b w/ camera from my
3d printer to run brickognize as a standalone parts finder, with a windows 11
flash. Minifig and decal parts are one click away, amazing how well it works!
What's up from WI! Andy A&R Brick
|
Interesting read:
https://www.mdpi.com/1424-8220/23/4/1898
|
|
| Author: | crxefx | | Posted: | Apr 7, 2023 01:31 | | Subject: | Re: Brick Seller App - Brickognize Integration | | Viewed: | 34 times | | Topic: | Related Software | |
|
| Never heard of brick seller but, found Brickognize a few weeks back (Thank you
to whoever mentioned this in the forum)! Best tool I've found to date for
figuring out parts. I'm thinking of repurposing a Pi4b w/ camera from my
3d printer to run brickognize as a standalone parts finder, with a windows 11
flash. Minifig and decal parts are one click away, amazing how well it works!
What's up from WI! Andy A&R Brick
|
|
| Author: | OurBricks | | Posted: | Apr 6, 2023 17:30 | | Subject: | Brick Seller App - Brickognize Integration | | Viewed: | 96 times | | Topic: | Related Software | |
|
| I have just released an enhancement to Brick Seller that integrates Brickognize
with Brick Seller's Inventory Search functionality.
If you are not familiar with Brickognize, it is an image search app for Lego
parts and sets.
Basically, I've added Brickognize as another way to search for BrickLink
catalog items (along with any inventory lots). You will be taken to the Brick
Seller Inventory Detail tab when you click on one of the items returned from
Brickognize.
Please see the attached screenshots.
If you are not familiar with Brick Seller, you can find a link to it on the BrickLink
Inventory Software links page here: https://www.bricklink.com/links.asp?catID=9
Rick
|
|
|
| Author: | Brixe | | Posted: | Mar 26, 2023 15:25 | | Subject: | Re: Stud.io scluptures | | Viewed: | 23 times | | Topic: | Related Software | |
|
| Thank you very much. I did not know this forum yet.
In Related Software, Cob writes:
|
|
| Author: | Cob | | Posted: | Mar 26, 2023 09:59 | | Subject: | Re: Stud.io scluptures | | Viewed: | 24 times | | Topic: | Related Software | |
|
| You will get better answers in Stud.io forum
https://forum.bricklink.com/
In Related Software, Brixe writes:
| | Hello,
I've been working for a few days on creating sculptures with Stud.io by importing
3D files. In the settings for sculpture building, you can specify the size of
the sculpture, and from which bricks it should be built.
If I choose the combination 1x2, 1x3 and 2x4, Studio builds the sculpture only
from the 3 single-row part types (1x1 is added automatically) and thus uses an
infinite number of parts. The 2x4 bricks do not appear at all in the finished
model.
If I select all parts, namely 1x2 to 1x8 and 2x2 to 2x8, all parts are used,
even if it does not make sense.
I had also once exclusively 2x4 selected, but then the program calculates itself
dead and builds then nevertheless everything from small single-row stones.
Does anyone know advice? Have you ever had this problem?
Marion
|
|
|
| Author: | Brixe | | Posted: | Mar 26, 2023 05:44 | | Subject: | Stud.io scluptures | | Viewed: | 50 times | | Topic: | Related Software | |
|
| Hello,
I've been working for a few days on creating sculptures with Stud.io by importing
3D files. In the settings for sculpture building, you can specify the size of
the sculpture, and from which bricks it should be built.
If I choose the combination 1x2, 1x3 and 2x4, Studio builds the sculpture only
from the 3 single-row part types (1x1 is added automatically) and thus uses an
infinite number of parts. The 2x4 bricks do not appear at all in the finished
model.
If I select all parts, namely 1x2 to 1x8 and 2x2 to 2x8, all parts are used,
even if it does not make sense.
I had also once exclusively 2x4 selected, but then the program calculates itself
dead and builds then nevertheless everything from small single-row stones.
Does anyone know advice? Have you ever had this problem?
Marion
|
|
| Author: | MoodySalmon | | Posted: | Mar 22, 2023 19:42 | | Subject: | Rotation Being Funky | | Viewed: | 65 times | | Topic: | Related Software | |
|
| I'm trying to rotate a piece (Hero Factory limb piece) and it's not rotating
properly. Any advice?
|
| Author: | Fractal0 | | Posted: | Mar 21, 2023 21:00 | | Subject: | Re: Inventory Software that shows sets | | Viewed: | 36 times | | Topic: | Related Software | |
|
| In Related Software, 1001bricks writes:
| | In Related Software, Fractal0 writes:
| | Is there software available, preferably free, that would give you a list of sets
and how complete they are based on your parts inventory?
|
Website: rebrickable.
Or BrickStore, free open source - but no so simply (but far better in general
to manage your collection)
|
Thank you I really appreciate the help!
|
|
| Author: | 1001bricks | | Posted: | Mar 21, 2023 20:57 | | Subject: | Re: Inventory Software that shows sets | | Viewed: | 28 times | | Topic: | Related Software | |
|
| In Related Software, Fractal0 writes:
| | Is there software available, preferably free, that would give you a list of sets
and how complete they are based on your parts inventory?
|
Website: rebrickable.
Or BrickStore, free open source - but no so simply (but far better in general
to manage your collection)
|
| Author: | Fractal0 | | Posted: | Mar 21, 2023 20:54 | | Subject: | Inventory Software that shows sets | | Viewed: | 52 times | | Topic: | Related Software | |
|
| Is there software available, preferably free, that would give you a list of sets
and how complete they are based on your parts inventory?
|
|
| Author: | romax1989 | | Posted: | Mar 16, 2023 13:37 | | Subject: | Re: brickstock is being weird | | Viewed: | 52 times | | Topic: | Related Software | |
|
| In Related Software, 1001bricks writes:
| | In Related Software, romax1989 writes:
| | In Related Software, 1001bricks writes:
| | In Related Software, romax1989 writes:
| | Whenever i try to select all and set to price guide, brickstock is only updating
like 1 item instead of all items. Anyone have this problem or how can i fix this?
|
BrickStock is dead for years, not updated, buggy.
Please download BrickStore, the original, free open source and maintained.
|
ok thank you it seems the issue only occurs when i try to change minifigs and
pieces
|
Just forget this one. BrickStore is day and night compared to the other one,
sincerely.
|
yes i will defiantly download it, i just want to get this set uploaded right
now
|
|
| Author: | 1001bricks | | Posted: | Mar 16, 2023 13:32 | | Subject: | Re: brickstock is being weird | | Viewed: | 39 times | | Topic: | Related Software | |
|
| In Related Software, romax1989 writes:
| | In Related Software, 1001bricks writes:
| | In Related Software, romax1989 writes:
| | Whenever i try to select all and set to price guide, brickstock is only updating
like 1 item instead of all items. Anyone have this problem or how can i fix this?
|
BrickStock is dead for years, not updated, buggy.
Please download BrickStore, the original, free open source and maintained.
|
ok thank you it seems the issue only occurs when i try to change minifigs and
pieces
|
Just forget this one. BrickStore is day and night compared to the other one,
sincerely.
|
|
| Author: | romax1989 | | Posted: | Mar 16, 2023 13:29 | | Subject: | Re: brickstock is being weird | | Viewed: | 42 times | | Topic: | Related Software | |
|
| In Related Software, 1001bricks writes:
| | In Related Software, romax1989 writes:
| | Whenever i try to select all and set to price guide, brickstock is only updating
like 1 item instead of all items. Anyone have this problem or how can i fix this?
|
BrickStock is dead for years, not updated, buggy.
Please download BrickStore, the original, free open source and maintained.
|
ok thank you it seems the issue only occurs when i try to change minifigs and
pieces
|
|
| Author: | 1001bricks | | Posted: | Mar 16, 2023 13:28 | | Subject: | Re: brickstock is being weird | | Viewed: | 38 times | | Topic: | Related Software | |
|
| In Related Software, romax1989 writes:
| | Whenever i try to select all and set to price guide, brickstock is only updating
like 1 item instead of all items. Anyone have this problem or how can i fix this?
|
BrickStock is dead for years, not updated, buggy.
Please download BrickStore, the original, free open source and maintained.
|
| Author: | romax1989 | | Posted: | Mar 16, 2023 13:16 | | Subject: | brickstock is being weird | | Viewed: | 85 times | | Topic: | Related Software | |
|
| Whenever i try to select all and set to price guide, brickstock is only updating
like 1 item instead of all items. Anyone have this problem or how can i fix this?
|
|
| Author: | OurBricks | | Posted: | Mar 14, 2023 17:48 | | Subject: | Brick Seller App - New Charts/Graphs | | Viewed: | 93 times | | Topic: | Related Software | |
|
| I have just release a new feature to Brick Seller that allows you to visualize
your Inventory data in several Charts/Graphs.
There is a new Charts tab under the main Inventory tab containing a dropdown
list to select one of the following:
Lots by Item Type
Qty by Item Type
Lots by Condition
Qty by Condition
Part Lots by Color
Part Qty by Color
Part Lots by Category
Part Qty by Category
Set Lots by Category
Set Qty by Category
Minifig Lots by Category
Minifig Qty by Category
Monthly Additions (Qty and $ Amount)
Monthly Additions By Item Type (Qty and $ Amount)
Monthly Ending Inventory (Qty and $ Amount)
Some example screen shots attached.
If you are not familiar with Brick Seller, you can find a link to it on the BrickLink
Inventory Software links page here: https://www.bricklink.com/links.asp?catID=9
Rick
|
|
|
| Author: | Leftoverbricks | | Posted: | Mar 13, 2023 12:26 | | Subject: | Re: question about new unoffical parts in stud.io | | Viewed: | 25 times | | Topic: | Related Software | |
|
| In Related Software, hpoort writes:
| | In Related Software, Leftoverbricks writes:
| | I've downloaded a couple of .dat files from Ldraw that are still unofficial
and copied them to C:\Program Files\Studio 2.0\ldraw\UnOfficial\parts but they
don't show up in Stud.io.
What's the trick?
(I did the same for MLCad where they showed up and were useable, so it's
not a problem with the parts themselves)
|
The trick is to go to the proper forum at https://forum.bricklink.com and browse
the posts there, or ask there.
The parts don't show up because they are not listed in the StudioPartDefinition2.txt
file, and you can't/shouldn't edit that file as it would break by any
update.
Only resolution for now: ask Cheenzo to forward the specific parts to the team,
or add the parts as custom parts instead.
|
Making a custom part is indeed the solution and I found a brilliant and easy
solution to do this:
https://www.reum.it/ldraw-to-studio-exporter/
So here's my Studio pic with the IKEA Bygglek box that I was looking for.
|
|
|
|
| Author: | KennoMonkey | | Posted: | Mar 9, 2023 14:23 | | Subject: | Help with Studio | | Viewed: | 40 times | | Topic: | Related Software | |
|
| | Is this the right forum for questions about Studio? Or where would that be? |
| Author: | Nubs_Select | | Posted: | Mar 3, 2023 18:27 | | Subject: | Re: Help Studio 2.0 | | Viewed: | 32 times | | Topic: | Related Software | |
|
| In Related Software, Timo30012 writes:
| | Hey ich habe eine Frage. Ich möchte gerne ein komplettes Set in Studio 2.0 haben
da ich versuchen will es zu erweitern. Ist es möglich ein Set da einzufügen?
Und wenn wie funktioniert das?
Hey, I have a question. I would like to have a full set in Studio 2.0 as I am
trying to expand it. Is it possible to add a set there? And if so how does it
work?
|
there is a dedicated studio froum here
https://forum.bricklink.com
|
|
| Author: | Timo30012 | | Posted: | Mar 3, 2023 18:04 | | Subject: | Help Studio 2.0 | | Viewed: | 62 times | | Topic: | Related Software | |
|
| Hey ich habe eine Frage. Ich möchte gerne ein komplettes Set in Studio 2.0 haben
da ich versuchen will es zu erweitern. Ist es möglich ein Set da einzufügen?
Und wenn wie funktioniert das?
Hey, I have a question. I would like to have a full set in Studio 2.0 as I am
trying to expand it. Is it possible to add a set there? And if so how does it
work?
|
|
| Author: | SylvainLS | | Posted: | Mar 3, 2023 03:04 | | Subject: | Re: Mosaik | | Viewed: | 36 times | | Topic: | Related Software | |
|
| In Related Software, Yellow.Brick writes:
| | In Related Software, SylvainLS writes:
Interesting.
I saw this a few days ago and was explaining it to my wife while parting out
31205 last night. A light bulb went off in my head and we're thinking about
making one as a gift for my son for his birthday of his favorite photo of himself.
I looked at the link - and maybe I missed it - but does it spit out instructions
for you
|
Unfortunately no.
It puts the base in one step and the picture in another. For more detailled
instructions, you’ll need to do them yourself:
https://studiohelp.bricklink.com/hc/en-us/articles/5626403887511-Introduction-to-instructions-maker
This feature can help:
https://studiohelp.bricklink.com/hc/en-us/articles/7123910550039-Automatic-instructions-Divide-into-steps
| | or does it force you to buy the parts too?
|
Of course not 
Unless you’re asking if it can be limited to parts you own / parts from an official
set?
In that case, yes & no:
— yes: you can limit the choice of parts (colours) to a given palette,
— no: it doesn’t care about quantities.
|
|
| Author: | Ziegelmeister | | Posted: | Mar 2, 2023 13:12 | | Subject: | Re: Mosaik | | Viewed: | 24 times | | Topic: | Related Software | |
|
| In Related Software, SylvainLS writes:
Interesting.
I saw this a few days ago and was explaining it to my wife while parting out
31205 last night. A light bulb went off in my head and we're thinking about
making one as a gift for my son for his birthday of his favorite photo of himself.
I looked at the link - and maybe I missed it - but does it spit out instructions
for you or does it force you to buy the parts too?
|
|
| Author: | OurBricks | | Posted: | Mar 1, 2023 14:10 | | Subject: | New Brick Seller Instruction Video | | Viewed: | 85 times | | Topic: | Related Software | |
|
| Just added a new instruction video to the Brick Seller home page that demonstrates
how to setup the Royal Mail Click & Drop integration features of Brick Seller.
If you are not familiar with Brick Seller, you can find a link to it on the BrickLink
Inventory Software links page here: https://www.bricklink.com/links.asp?catID=9
Rick
|
|
| Author: | hpoort | | Posted: | Feb 28, 2023 12:18 | | Subject: | Re: question about new unoffical parts in stud.io | | Viewed: | 23 times | | Topic: | Related Software | |
|
| In Related Software, Leftoverbricks writes:
| | I've downloaded a couple of .dat files from Ldraw that are still unofficial
and copied them to C:\Program Files\Studio 2.0\ldraw\UnOfficial\parts but they
don't show up in Stud.io.
What's the trick?
(I did the same for MLCad where they showed up and were useable, so it's
not a problem with the parts themselves)
|
The trick is to go to the proper forum at https://forum.bricklink.com and browse
the posts there, or ask there.
The parts don't show up because they are not listed in the StudioPartDefinition2.txt
file, and you can't/shouldn't edit that file as it would break by any
update.
Only resolution for now: ask Cheenzo to forward the specific parts to the team,
or add the parts as custom parts instead.
|
|
| Author: | Leftoverbricks | | Posted: | Feb 28, 2023 11:36 | | Subject: | question about new unoffical parts in stud.io | | Viewed: | 48 times | | Topic: | Related Software | |
|
| I've downloaded a couple of .dat files from Ldraw that are still unofficial
and copied them to C:\Program Files\Studio 2.0\ldraw\UnOfficial\parts but they
don't show up in Stud.io.
What's the trick?
(I did the same for MLCad where they showed up and were useable, so it's
not a problem with the parts themselves)
|
| Author: | Witch | | Posted: | Feb 27, 2023 06:26 | | Subject: | Re: Mosaik | | Viewed: | 28 times | | Topic: | Related Software | |
|
| In Related Software, SylvainLS writes:
Thanks for that info!! 😁
If i one day will try that with a photo 😁
|
| Author: | Nubs_Select | | Posted: | Feb 27, 2023 00:18 | | Subject: | Re: Mosaik | | Viewed: | 38 times | | Topic: | Related Software | |
|
| In Related Software, NicodePorto writes:
Let’s take a moment to admire this 
|
|
| Author: | StarBrick | | Posted: | Feb 26, 2023 09:00 | | Subject: | Re: Mosaik | | Viewed: | 37 times | | Topic: | Related Software | |
|
| | it landed in Stud.IO |
|
|
| Author: | randyipp | | Posted: | Feb 20, 2023 21:45 | | Subject: | Re: BrickStore | | Viewed: | 43 times | | Topic: | Related Software | |
|
| In Related Software, alexography writes:
| | Hello. I'm trying to update several lots in brickstore. I am just adding
remarks. If a lot had the remark field blank and I am populating it. When I
try to export the update it only shows a small portion of the updated items.
There aren't any errors when exporting and all have lotids. I've tried
with several different bunches of lots. But if I modify and export 20 lots,
only 6 show up with the reflected update after hitting the verify button. Any
ideas? Thank you!
|
If you select mass update it only mass updates any lines/lots with actual changes.
So if you grab 3 lots that don't need to be updated, mass update - you get
nothing. If you grab 3 lots that all have changes, you get all 3.
|
|
| Author: | Poncke | | Posted: | Feb 20, 2023 17:19 | | Subject: | Re: BrickStore | | Viewed: | 33 times | | Topic: | Related Software | |
|
| In Related Software, 1001bricks writes:
| | In Related Software, alexography writes:
| | In Related Software, 1001bricks writes:
Thank you for the options. I'll keep trying. I am using brickstore 2022.11.2
(build: 890)
paid registration.
|
???
There is no paid registration: you're using BrickSTOCK maybe?
This one does NOT work!
|
BrickStore latest version is 2022.11.2 (build: 890) - BrickStock stopped developing
in 2019.
But as you say, there is no subscription for Brickstore, only option to donate.
|
|
| Author: | 1001bricks | | Posted: | Feb 20, 2023 16:41 | | Subject: | Re: BrickStore | | Viewed: | 40 times | | Topic: | Related Software | |
|
| In Related Software, alexography writes:
| | In Related Software, 1001bricks writes:
Thank you for the options. I'll keep trying. I am using brickstore 2022.11.2
(build: 890)
paid registration.
|
???
There is no paid registration: you're using BrickSTOCK maybe?
This one does NOT work!
|
|
| Author: | 6thstring | | Posted: | Feb 20, 2023 16:36 | | Subject: | Re: BrickStore | | Viewed: | 42 times | | Topic: | Related Software | |
|
| In Related Software, 1001bricks writes:
Thank you for the options. I'll keep trying. I am using brickstore 2022.11.2
(build: 890)
paid registration. I'll start over all the way and keep trying. Thank
you again! I appreciate the community and help on here very much!
|
|
| Author: | 1001bricks | | Posted: | Feb 20, 2023 14:54 | | Subject: | Re: BrickStore | | Viewed: | 32 times | | Topic: | Related Software | |
|
| | | I did just notice though. It is only pasting the smaller number as well. All
are highlighted prior to selecting the export feature. But only 5 get copied.
|
Read also:
https://www.bricklink.com/message.asp?ID=1394550
|
| Author: | 1001bricks | | Posted: | Feb 20, 2023 14:50 | | Subject: | Re: BrickStore | | Viewed: | 27 times | | Topic: | Related Software | |
|
| | | That doesn't show up at all. Even in the ones that show will update successfully.
Let's say 20 previously empty remarks fields are now updated. I select
all, export, update, then only 5 show up on the verify screen.
|
Menu View, Show difference mode.
You may need to reupdate the desired changes.
See if you see the blue thingy.
|
|
| Author: | 6thstring | | Posted: | Feb 20, 2023 14:02 | | Subject: | Re: BrickStore | | Viewed: | 31 times | | Topic: | Related Software | |
|
| In Related Software, 1001bricks writes:
| | | | | | | | Hello. I'm trying to update several lots in brickstore. I am just adding
remarks. If a lot had the remark field blank and I am populating it. When I
try to export the update it only shows a small portion of the updated items.
There aren't any errors when exporting and all have lotids. I've tried
with several different bunches of lots. But if I modify and export 20 lots,
only 6 show up with the reflected update after hitting the verify button. Any
ideas? Thank you!
|
Wrong topic.
Because your consolidation settings?
|
That's the upload option. I am using the update option. There are no dropdowns
or checkboxes on the update option. Just paste.
|
Ooops sorry, didn't read you well enough.
Does it show you the blue thing to each lot you've edited the Remark
|
| | See picture.
Also carefully select ALL when mass updating - because it only updates what has
been updated WITHIN the selection (so ALL is perfect).
|
.
That doesn't show up at all. Even in the ones that show will update successfully.
Let's say 20 previously empty remarks fields are now updated. I select
all, export, update, then only 5 show up on the verify screen.
I did just notice though. It is only pasting the smaller number as well. All
are highlighted prior to selecting the export feature. But only 5 get copied.
|
|
| Author: | OurBricks | | Posted: | Feb 20, 2023 12:58 | | Subject: | New Brick Seller Instruction Video | | Viewed: | 86 times | | Topic: | Related Software | |
|
| Just added a new instruction video to the Brick Seller home page that demonstrates
how to setup the Brick Owl integration features of Brick Seller.
If you are not familiar with Brick Seller, you can find a link to it on the BrickLink
Inventory Software links page here: https://www.bricklink.com/links.asp?catID=9
Rick
|
|
| Author: | 1001bricks | | Posted: | Feb 20, 2023 12:18 | | Subject: | Re: BrickStore | | Viewed: | 36 times | | Topic: | Related Software | |
|
| | | | | | | Hello. I'm trying to update several lots in brickstore. I am just adding
remarks. If a lot had the remark field blank and I am populating it. When I
try to export the update it only shows a small portion of the updated items.
There aren't any errors when exporting and all have lotids. I've tried
with several different bunches of lots. But if I modify and export 20 lots,
only 6 show up with the reflected update after hitting the verify button. Any
ideas? Thank you!
|
Wrong topic.
Because your consolidation settings?
|
That's the upload option. I am using the update option. There are no dropdowns
or checkboxes on the update option. Just paste.
|
Ooops sorry, didn't read you well enough.
Does it show you the blue thing to each lot you've edited the Remark?
See picture.
Also carefully select ALL when mass updating - because it only updates what has
been updated WITHIN the selection (so ALL is perfect).
|
|
|
| Author: | 6thstring | | Posted: | Feb 20, 2023 12:04 | | Subject: | Re: BrickStore | | Viewed: | 30 times | | Topic: | Related Software | |
|
| In Related Software, 1001bricks writes:
| | In Inventories, alexography writes:
| | Hello. I'm trying to update several lots in brickstore. I am just adding
remarks. If a lot had the remark field blank and I am populating it. When I
try to export the update it only shows a small portion of the updated items.
There aren't any errors when exporting and all have lotids. I've tried
with several different bunches of lots. But if I modify and export 20 lots,
only 6 show up with the reflected update after hitting the verify button. Any
ideas? Thank you!
|
Wrong topic.
Because your consolidation settings?
|
That's the upload option. I am using the update option. There are no dropdowns
or checkboxes on the update option. Just paste.
|
|
| Author: | 1001bricks | | Posted: | Feb 20, 2023 11:49 | | Subject: | Re: BrickStore | | Viewed: | 43 times | | Topic: | Related Software | |
|
| In Inventories, alexography writes:
| | Hello. I'm trying to update several lots in brickstore. I am just adding
remarks. If a lot had the remark field blank and I am populating it. When I
try to export the update it only shows a small portion of the updated items.
There aren't any errors when exporting and all have lotids. I've tried
with several different bunches of lots. But if I modify and export 20 lots,
only 6 show up with the reflected update after hitting the verify button. Any
ideas? Thank you!
|
Wrong topic.
Because your consolidation settings?
|
|
|
| Author: | 6thstring | | Posted: | Feb 20, 2023 11:08 | | Subject: | BrickStore | | Viewed: | 138 times | | Topic: | Related Software | |
|
| Hello. I'm trying to update several lots in brickstore. I am just adding
remarks. If a lot had the remark field blank and I am populating it. When I
try to export the update it only shows a small portion of the updated items.
There aren't any errors when exporting and all have lotids. I've tried
with several different bunches of lots. But if I modify and export 20 lots,
only 6 show up with the reflected update after hitting the verify button. Any
ideas? Thank you!
|
|
| Author: | MartenMM | | Posted: | Feb 20, 2023 05:17 | | Subject: | API authorization implementation in R | | Viewed: | 61 times | | Topic: | Related Software | |
|
| I am looking for help implementing authorization for the Bricklink API in R.
I have registered as a seller and obtained my keys and secrets. I have minimal
knowledge of OAuth but have previously successfully authorized with other APIs
(e.g. Spotify, Discogs, etc.) using the `httr` and `httr2` packages.
The authorization flow used by Bricklink confuses me and I am looking for help
correctly implementing it in my code. I'd prefer a solution using `httr2`
but any help is very welcome. I have also asked this question on StackOverflow
(https://stackoverflow.com/questions/75507874) but am hoping that I'll find
an answer in this community quicker.
|
|
| Author: | ErwinNL | | Posted: | Feb 18, 2023 06:57 | | Subject: | BLS Manager & InSpaceSync Power-up! | | Viewed: | 41 times | | Topic: | Related Software | |
|
| BLS Manager update 1804 is available!
New in this release:
- Pick orders from your phone, tablet, or browser.
Multiple clients are supported! Item selection is synchronized between BLS Manager
and other pick clients.
Kind regards,
Erwin
InSpace Software
https://inspacesoftware.com/
https://discord.gg/RCJx22JK
|
|
|
| Author: | OurBricks | | Posted: | Feb 17, 2023 14:33 | | Subject: | New Brick Seller Demonstration Videos | | Viewed: | 109 times | | Topic: | Related Software | |
|
| New and improved demonstration videos are now available from the Brick Seller
home page. These new videos have been updated to show the many enhancements
that have been made to Brick Seller since the original videos were created.
There are videos for the following features of Brick Seller.
Getting Started
Inventory Management
Parting Out Sets
Order Management
Options and Settings
If you are not familiar with Brick Seller, you can find a link to it on the BrickLink
Inventory Software links page here: https://www.bricklink.com/links.asp?catID=9
Rick
|
|
| Author: | 1001bricks | | Posted: | Feb 15, 2023 13:45 | | Subject: | Re: Bricklink API Price Values returned Proroblem | | Viewed: | 27 times | | Topic: | Related Software | |
|
| | | Well that is not the case for the API it uses prices without vat for stores that
have VAT and with vat for stores that have not enabled that option.
|
Stellar already gave you a link to an interesting and complicated thread, and
resumed clearly in 1 line what the problem is.
SylvainLS also detailed more info, and others did.
VAT especially including OSS rules is very complicated.
| | Again does anyone know where or how I can contact the API team?
|
You can't "contact the API team".
You're free to locate the Help pages and open a ticket there, or in the Help
Desk.
But don't expect anything from this, including any reply (sorry).
Please read above, use the Price Guide API without region/currency, or simply
don't use APIs.
|
|
| Author: | SylvainLS | | Posted: | Feb 15, 2023 13:44 | | Subject: | Re: Bricklink API Price Values returned Proroblem | | Viewed: | 23 times | | Topic: | Related Software | |
|
| In Related Software, lamnian writes:
| | […]
Well that is not the case for the API it uses prices without vat for stores that
have VAT and with vat for stores that have not enabled that option.
|
Sorry, it seems there’s a misunderstanding: I wasn’t explaining how the Price
Guide or the API do work now, I was just saying that it’s more complicated than
“should show prices with buyer’s VAT” (which is already complicated).
The PG was already wrong when the rule was “should show prices with seller’s
VAT” (not a typo).
| | Again does anyone know where or how I can contact the API team?
|
The Helpdesk.
|
|
| Author: | lamnian | | Posted: | Feb 15, 2023 13:15 | | Subject: | Re: Bricklink API Price Values returned Proroblem | | Viewed: | 19 times | | Topic: | Related Software | |
|
| In Related Software, SylvainLS writes:
| | In Related Software, lamnian writes:
| | […]
ONLINE logged on user prices are calculated with VAT per store that has VAT,
But uses the VAT% of the user's country VAT. More or less the net price.
ONLINE logged off user prices are calculated with VAT per store that has VAT,
But uses the VAT% of the store's country VAT. More or less the net price.
Since it mandatory for EU retailers to display net prices with the customer's
VAT% it's logical for this to happen.
|
Not exactly.
The VAT rate depends on the seller’s gross & registration: wether they are above
or below the €10k in EU non-domestic sales and wether they are registered (OSS
or in the buyer’s country) or not (they can register even when below €10k).
If the store is registered: it’s the buyer’s country’s rate that applies.
If the store is not registered: it’s the seller’s country’s rate that applies.
In any case, the seller can still show the prices with their country’s VAT until
the buyer enters their information (delivery address), so, practically, until
the order is made.
TL;DR: for logged users, the prices can be shown with buyer’s VAT rate or seller’s
VAT rate, depending on the seller.
| | So prices outside the EU should be identical online and through the API.
|
Yes.
|
Well that is not the case for the API it uses prices without vat for stores that
have VAT and with vat for stores that have not enabled that option.
Again does anyone know where or how I can contact the API team?
|
|
| Author: | SylvainLS | | Posted: | Feb 15, 2023 08:16 | | Subject: | Re: Bricklink API Price Values returned Proroblem | | Viewed: | 24 times | | Topic: | Related Software | |
|
| In Related Software, lamnian writes:
| | […]
ONLINE logged on user prices are calculated with VAT per store that has VAT,
But uses the VAT% of the user's country VAT. More or less the net price.
ONLINE logged off user prices are calculated with VAT per store that has VAT,
But uses the VAT% of the store's country VAT. More or less the net price.
Since it mandatory for EU retailers to display net prices with the customer's
VAT% it's logical for this to happen.
|
Not exactly.
The VAT rate depends on the seller’s gross & registration: wether they are above
or below the €10k in EU non-domestic sales and wether they are registered (OSS
or in the buyer’s country) or not (they can register even when below €10k).
If the store is registered: it’s the buyer’s country’s rate that applies.
If the store is not registered: it’s the seller’s country’s rate that applies.
In any case, the seller can still show the prices with their country’s VAT until
the buyer enters their information (delivery address), so, practically, until
the order is made.
TL;DR: for logged users, the prices can be shown with buyer’s VAT rate or seller’s
VAT rate, depending on the seller.
| | So prices outside the EU should be identical online and through the API.
|
Yes.
|
|
| Author: | lamnian | | Posted: | Feb 15, 2023 07:34 | | Subject: | Re: Bricklink API Price Values returned Proroblem | | Viewed: | 30 times | | Topic: | Related Software | |
|
| In Related Software, Stellar writes:
| | In Related Software, lamnian writes:
| | Hello,
I am accessing the API to get the prices of parts. I get my response for avg_price
& qty_avg_price, but the prices are different from the one shown in the price
guide. The other values are the same total_quantity & unit_quantity. Is this
because of rounding or do I have to add sometging to the prices?
Below are the Retuned Values and I have attached an image from the BL Page.
Bricklink ID: 61678
Element ID: 6037746
Name: Slope Curved 4 x 1
Item Type: PART
Category: Slope Curved ( 438 )
Color: Black ( 11 )
Average QTY Price: 0.0738
Average Price: 0.0889
Unit Quantity: 883
Total Quantity: 82431
Region: eu
Currency Code: euro
Thanx,
Constantine
|
You can have a read at this:
https://github.com/rgriebl/brickstore/issues/80
But basically you are never gonna get the same exact resuslts.
|
Thanx for the Direction, after reading the thread and looking at the complete
response from the API I came to the following conclusion:
API prices are calculated without VAT per store that has VAT, But uses the VAT%
of the store's country VAT. More or less the list price.
ONLINE logged on user prices are calculated with VAT per store that has VAT,
But uses the VAT% of the user's country VAT. More or less the net price.
ONLINE logged off user prices are calculated with VAT per store that has VAT,
But uses the VAT% of the store's country VAT. More or less the net price.
Since it mandatory for EU retailers to display net prices with the customer's
VAT% it's logical for this to happen. So prices outside the EU should be
identical online and through the API.
Is there a way to contact the API Dev team to add somethings to API to get make
it more usfull
|
|
| Author: | Stellar | | Posted: | Feb 15, 2023 04:01 | | Subject: | Re: Bricklink API Price Values returned Proroblem | | Viewed: | 38 times | | Topic: | Related Software | |
|
| In Related Software, lamnian writes:
| | Hello,
I am accessing the API to get the prices of parts. I get my response for avg_price
& qty_avg_price, but the prices are different from the one shown in the price
guide. The other values are the same total_quantity & unit_quantity. Is this
because of rounding or do I have to add sometging to the prices?
Below are the Retuned Values and I have attached an image from the BL Page.
Bricklink ID: 61678
Element ID: 6037746
Name: Slope Curved 4 x 1
Item Type: PART
Category: Slope Curved ( 438 )
Color: Black ( 11 )
Average QTY Price: 0.0738
Average Price: 0.0889
Unit Quantity: 883
Total Quantity: 82431
Region: eu
Currency Code: euro
Thanx,
Constantine
|
You can have a read at this:
https://github.com/rgriebl/brickstore/issues/80
But basically you are never gonna get the same exact resuslts.
|
|
| Author: | lamnian | | Posted: | Feb 15, 2023 03:33 | | Subject: | Re: Bricklink API Price Values returned Proroblem | | Viewed: | 28 times | | Topic: | Related Software | |
|
| In Related Software, wildchicken13 writes:
| | In Related Software, lamnian writes:
| | Hello,
I am accessing the API to get the prices of parts. I get my response for avg_price
& qty_avg_price, but the prices are different from the one shown in the price
guide. The other values are the same total_quantity & unit_quantity. Is this
because of rounding or do I have to add sometging to the prices?
Below are the Retuned Values and I have attached an image from the BL Page.
Bricklink ID: 61678
Element ID: 6037746
Name: Slope Curved 4 x 1
Item Type: PART
Category: Slope Curved ( 438 )
Color: Black ( 11 )
Average QTY Price: 0.0738
Average Price: 0.0889
Unit Quantity: 883
Total Quantity: 82431
Region: eu
Currency Code: euro
Thanx,
Constantine
|
I think you have some settings and/or filters in place that are messing with
the price guide.
When I check the price guide for this same part (#6037746), I see the following
stats:
Total Lots: 2056
Total Qty: 159678
Min Price: US $0.0215
Avg Price: US $0.1016
Qty Avg Price: US $0.0937
Max Price: US $2.0000
Maybe change your price guide settings to show four digits rather than two, then
we can tell if the underlying prices are different or if it is simply a rounding
error: https://www.bricklink.com/priceGuideSettings.asp
|
Hello,
This is what I get for "6037746"
API Responce:
[new_or_used] = N
[currency_code] = euro
[min_price] = 0.0200
[max_price] = 1.2500
[avg_price] = 0.0891
[qty_avg_price] = 0.0745
[unit_quantity] = 883
[total_quantity] = 84081
Online:
Total Lots: 883
Total Qty: 84081
Min Price: EUR 0.0200
Avg Price: EUR 0.0934
Qty Avg Price: EUR 0.0838
Max Price: EUR 1.2500
|
|
|
| Author: | lamnian | | Posted: | Feb 15, 2023 03:13 | | Subject: | Re: Bricklink API Price Values returned Proroblem | | Viewed: | 27 times | | Topic: | Related Software | |
|
| In Related Software, 1001bricks writes:
| | | | | | Those may not exist in the APIs; giving different values.
|
I use the same settings with the Price Guide, as far as I can see... Thanx Though
|
Yes, but which "settings" use the API?
|
The setting we can use are:
Region: eu
Currency Code: euro
|
| Author: | 1001bricks | | Posted: | Feb 14, 2023 19:13 | | Subject: | Re: Bricklink API Price Values returned Proroblem | | Viewed: | 23 times | | Topic: | Related Software | |
|
| | | | | Those may not exist in the APIs; giving different values.
|
I use the same settings with the Price Guide, as far as I can see... Thanx Though
|
Yes, but which "settings" use the API?
|
|
| Author: | lamnian | | Posted: | Feb 14, 2023 18:12 | | Subject: | Re: Bricklink API Price Values returned Proroblem | | Viewed: | 23 times | | Topic: | Related Software | |
|
| In Related Software, Nubs_Select writes:
| | In Related Software, lamnian writes:
| | You are rignt if we round up for that part, but look at this same item but blue
Bricklink ID: 61678
Element ID: 6045938
Name: Slope Curved 4 x 1
Item Type: PART
Category: Slope Curved ( 438 )
Color: Blue ( 7 )
Average Price: 0.15 ( 0.1405 )
Average QTY Price: 0.14 ( 0.1392 )
Unit Quantity: 573
Total Quantity: 16292
Region: eu
Currency Code: euro
But I see the following online
Avg Price: EUR 0.15
Qty Avg Price: EUR 0.16
In Related Software, Nubs_Select writes:
| | In Related Software, lamnian writes:
| | Hello,
I am accessing the API to get the prices of parts. I get my response for avg_price
& qty_avg_price, but the prices are different from the one shown in the price
guide. The other values are the same total_quantity & unit_quantity. Is this
because of rounding or do I have to add sometging to the prices?
Below are the Retuned Values and I have attached an image from the BL Page.
Bricklink ID: 61678
Element ID: 6037746
Name: Slope Curved 4 x 1
Item Type: PART
Category: Slope Curved ( 438 )
Color: Black ( 11 )
Average QTY Price: 0.0738
Average Price: 0.0889
Unit Quantity: 883
Total Quantity: 82431
Region: eu
Currency Code: euro
Thanx,
Constantine
|
The prices look correct unless I’m missing something. It’s just going to a further
decimal point since the price guide dosnt go to decimal points normally
|
|
is it getting the sold data instead of the for sale data maybe?
|
No, it's not you specify what values you want. And if you check, the quantities
are the same. Does anyone know how I can contact the API Team?
|
|
| Author: | wildchicken13 | | Posted: | Feb 14, 2023 18:08 | | Subject: | Re: Bricklink API Price Values returned Proroblem | | Viewed: | 25 times | | Topic: | Related Software | |
|
| In Related Software, lamnian writes:
| | Hello,
I am accessing the API to get the prices of parts. I get my response for avg_price
& qty_avg_price, but the prices are different from the one shown in the price
guide. The other values are the same total_quantity & unit_quantity. Is this
because of rounding or do I have to add sometging to the prices?
Below are the Retuned Values and I have attached an image from the BL Page.
Bricklink ID: 61678
Element ID: 6037746
Name: Slope Curved 4 x 1
Item Type: PART
Category: Slope Curved ( 438 )
Color: Black ( 11 )
Average QTY Price: 0.0738
Average Price: 0.0889
Unit Quantity: 883
Total Quantity: 82431
Region: eu
Currency Code: euro
Thanx,
Constantine
|
I think you have some settings and/or filters in place that are messing with
the price guide.
When I check the price guide for this same part (#6037746), I see the following
stats:
Total Lots: 2056
Total Qty: 159678
Min Price: US $0.0215
Avg Price: US $0.1016
Qty Avg Price: US $0.0937
Max Price: US $2.0000
Maybe change your price guide settings to show four digits rather than two, then
we can tell if the underlying prices are different or if it is simply a rounding
error: https://www.bricklink.com/priceGuideSettings.asp
|
|
|
| Author: | lamnian | | Posted: | Feb 14, 2023 18:08 | | Subject: | Re: Bricklink API Price Values returned Proroblem | | Viewed: | 21 times | | Topic: | Related Software | |
|
| In Related Software, 1001bricks writes:
| | In Related Software, lamnian writes:
| | You are rignt if we round up for that part, but look at this same item but blue
Bricklink ID: 61678
Element ID: 6045938
Name: Slope Curved 4 x 1
Item Type: PART
Category: Slope Curved ( 438 )
Color: Blue ( 7 )
Average Price: 0.15 ( 0.1405 )
Average QTY Price: 0.14 ( 0.1392 )
Unit Quantity: 573
Total Quantity: 16292
Region: eu
Currency Code: euro
But I see the following online
Avg Price: EUR 0.15
Qty Avg Price: EUR 0.16
|
Not sure if it's the case, but remember when you (yourself) see the Price
Guide on BrickLink you have some associated settings.
Those may not exist in the APIs; giving different values.
|
I use the same settings with the Price Guide, as far as I can see... Thanx Though
|
|
| Author: | Nubs_Select | | Posted: | Feb 14, 2023 17:46 | | Subject: | Re: Bricklink API Price Values returned Proroblem | | Viewed: | 35 times | | Topic: | Related Software | |
|
| In Related Software, lamnian writes:
| | You are rignt if we round up for that part, but look at this same item but blue
Bricklink ID: 61678
Element ID: 6045938
Name: Slope Curved 4 x 1
Item Type: PART
Category: Slope Curved ( 438 )
Color: Blue ( 7 )
Average Price: 0.15 ( 0.1405 )
Average QTY Price: 0.14 ( 0.1392 )
Unit Quantity: 573
Total Quantity: 16292
Region: eu
Currency Code: euro
But I see the following online
Avg Price: EUR 0.15
Qty Avg Price: EUR 0.16
In Related Software, Nubs_Select writes:
| | In Related Software, lamnian writes:
| | Hello,
I am accessing the API to get the prices of parts. I get my response for avg_price
& qty_avg_price, but the prices are different from the one shown in the price
guide. The other values are the same total_quantity & unit_quantity. Is this
because of rounding or do I have to add sometging to the prices?
Below are the Retuned Values and I have attached an image from the BL Page.
Bricklink ID: 61678
Element ID: 6037746
Name: Slope Curved 4 x 1
Item Type: PART
Category: Slope Curved ( 438 )
Color: Black ( 11 )
Average QTY Price: 0.0738
Average Price: 0.0889
Unit Quantity: 883
Total Quantity: 82431
Region: eu
Currency Code: euro
Thanx,
Constantine
|
The prices look correct unless I’m missing something. It’s just going to a further
decimal point since the price guide dosnt go to decimal points normally
|
|
is it getting the sold data instead of the for sale data maybe?
|
|
| Author: | 1001bricks | | Posted: | Feb 14, 2023 16:36 | | Subject: | Re: Bricklink API Price Values returned Proroblem | | Viewed: | 32 times | | Topic: | Related Software | |
|
| In Related Software, lamnian writes:
| | You are rignt if we round up for that part, but look at this same item but blue
Bricklink ID: 61678
Element ID: 6045938
Name: Slope Curved 4 x 1
Item Type: PART
Category: Slope Curved ( 438 )
Color: Blue ( 7 )
Average Price: 0.15 ( 0.1405 )
Average QTY Price: 0.14 ( 0.1392 )
Unit Quantity: 573
Total Quantity: 16292
Region: eu
Currency Code: euro
But I see the following online
Avg Price: EUR 0.15
Qty Avg Price: EUR 0.16
|
Not sure if it's the case, but remember when you (yourself) see the Price
Guide on BrickLink you have some associated settings.
Those may not exist in the APIs; giving different values.
|
|
|
| Author: | lamnian | | Posted: | Feb 14, 2023 16:10 | | Subject: | Re: Bricklink API Price Values returned Proroblem | | Viewed: | 27 times | | Topic: | Related Software | |
|
| In Related Software, Nubs_Select writes:
| | In Related Software, lamnian writes:
| | Hello,
I am accessing the API to get the prices of parts. I get my response for avg_price
& qty_avg_price, but the prices are different from the one shown in the price
guide. The other values are the same total_quantity & unit_quantity. Is this
because of rounding or do I have to add sometging to the prices?
Below are the Retuned Values and I have attached an image from the BL Page.
Bricklink ID: 61678
Element ID: 6037746
Name: Slope Curved 4 x 1
Item Type: PART
Category: Slope Curved ( 438 )
Color: Black ( 11 )
Average QTY Price: 0.0738
Average Price: 0.0889
Unit Quantity: 883
Total Quantity: 82431
Region: eu
Currency Code: euro
Thanx,
Constantine
|
The prices look correct unless I’m missing something. It’s just going to a further
decimal point since the price guide dosnt go to decimal points normally
|
Look a this also:
Bricklink ID: 61678
Element ID: 6037750
Name: Slope Curved 4 x 1
Item Type: PART
Category: Slope Curved ( 438 )
Color: Orange ( 4 )
Average Price: 0.17 ( 0.1647 )
Average QTY Price: 0.2 ( 0.1947 )
Unit Quantity: 385
Total Quantity: 6060
Region: eu
Currency Code: euro
Online its
Avg Price: EUR 0.18
Qty Avg Price: EUR 0.22
|
|
|
| Author: | lamnian | | Posted: | Feb 14, 2023 16:00 | | Subject: | Re: Bricklink API Price Values returned Proroblem | | Viewed: | 33 times | | Topic: | Related Software | |
|
| You are rignt if we round up for that part, but look at this same item but blue
Bricklink ID: 61678
Element ID: 6045938
Name: Slope Curved 4 x 1
Item Type: PART
Category: Slope Curved ( 438 )
Color: Blue ( 7 )
Average Price: 0.15 ( 0.1405 )
Average QTY Price: 0.14 ( 0.1392 )
Unit Quantity: 573
Total Quantity: 16292
Region: eu
Currency Code: euro
But I see the following online
Avg Price: EUR 0.15
Qty Avg Price: EUR 0.16
In Related Software, Nubs_Select writes:
| | In Related Software, lamnian writes:
| | Hello,
I am accessing the API to get the prices of parts. I get my response for avg_price
& qty_avg_price, but the prices are different from the one shown in the price
guide. The other values are the same total_quantity & unit_quantity. Is this
because of rounding or do I have to add sometging to the prices?
Below are the Retuned Values and I have attached an image from the BL Page.
Bricklink ID: 61678
Element ID: 6037746
Name: Slope Curved 4 x 1
Item Type: PART
Category: Slope Curved ( 438 )
Color: Black ( 11 )
Average QTY Price: 0.0738
Average Price: 0.0889
Unit Quantity: 883
Total Quantity: 82431
Region: eu
Currency Code: euro
Thanx,
Constantine
|
The prices look correct unless I’m missing something. It’s just going to a further
decimal point since the price guide dosnt go to decimal points normally
|
|
|
|
| Author: | Nubs_Select | | Posted: | Feb 14, 2023 10:51 | | Subject: | Re: Bricklink API Price Values returned Proroblem | | Viewed: | 38 times | | Topic: | Related Software | |
|
| In Related Software, lamnian writes:
| | Hello,
I am accessing the API to get the prices of parts. I get my response for avg_price
& qty_avg_price, but the prices are different from the one shown in the price
guide. The other values are the same total_quantity & unit_quantity. Is this
because of rounding or do I have to add sometging to the prices?
Below are the Retuned Values and I have attached an image from the BL Page.
Bricklink ID: 61678
Element ID: 6037746
Name: Slope Curved 4 x 1
Item Type: PART
Category: Slope Curved ( 438 )
Color: Black ( 11 )
Average QTY Price: 0.0738
Average Price: 0.0889
Unit Quantity: 883
Total Quantity: 82431
Region: eu
Currency Code: euro
Thanx,
Constantine
|
The prices look correct unless I’m missing something. It’s just going to a further
decimal point since the price guide dosnt go to decimal points normally
|
|
| Author: | MikeMcCollister | | Posted: | Feb 14, 2023 10:46 | | Subject: | Re: Is there a way to update a file in My Stuio? | | Viewed: | 16 times | | Topic: | Related Software | |
|
| In General, SylvainLS writes:
| | In General, MikeMcCollister writes:
| | I just submitted my first MOC to the Gallery and made it public. If I want to
make changes, it there a way to update it or do I delete it and upload another
one?
|
Hi,
Unfortunately, for now, it’s delete + new one.
That’s supposed to change one day….
|
OK. Thanks. Hopefully the option to update will be available soon.
|
|
| Author: | SylvainLS | | Posted: | Feb 14, 2023 10:42 | | Subject: | Re: Is there a way to update a file in My Stuio? | | Viewed: | 18 times | | Topic: | Related Software | |
|
| In General, MikeMcCollister writes:
| | I just submitted my first MOC to the Gallery and made it public. If I want to
make changes, it there a way to update it or do I delete it and upload another
one?
|
Hi,
Unfortunately, for now, it’s delete + new one.
That’s supposed to change one day….
|
| Author: | MikeMcCollister | | Posted: | Feb 14, 2023 10:30 | | Subject: | Is there a way to update a file in My Stuio? | | Viewed: | 35 times | | Topic: | Related Software | |
|
| I just submitted my first MOC to the Gallery and made it public. If I want to
make changes, it there a way to update it or do I delete it and upload another
one?
Thanks,
Mike
|
|
| Author: | lamnian | | Posted: | Feb 14, 2023 07:07 | | Subject: | Bricklink API Price Values returned Proroblem | | Viewed: | 110 times | | Topic: | Related Software | |
|
| Hello,
I am accessing the API to get the prices of parts. I get my response for avg_price
& qty_avg_price, but the prices are different from the one shown in the price
guide. The other values are the same total_quantity & unit_quantity. Is this
because of rounding or do I have to add sometging to the prices?
Below are the Retuned Values and I have attached an image from the BL Page.
Bricklink ID: 61678
Element ID: 6037746
Name: Slope Curved 4 x 1
Item Type: PART
Category: Slope Curved ( 438 )
Color: Black ( 11 )
Average QTY Price: 0.0738
Average Price: 0.0889
Unit Quantity: 883
Total Quantity: 82431
Region: eu
Currency Code: euro
Thanx,
Constantine
|
|
|
| Author: | SylvainLS | | Posted: | Feb 4, 2023 12:33 | | Subject: | Re: Part Editor | | Viewed: | 29 times | | Topic: | Related Software | |
|
| In Related Software, Halitus writes:
| | I faced the same issue on Windows 11. The problem was resolved by running the
program as an administrator.
|
PartDesigner was updated 10 days ago and that solved the problem.
|
| Author: | Halitus | | Posted: | Feb 4, 2023 12:24 | | Subject: | Re: Part Editor | | Viewed: | 31 times | | Topic: | Related Software | |
|
| I faced the same issue on Windows 11. The problem was resolved by running the
program as an administrator.
| | I have not been able to open Bricklink's part editor without it giving me
the "Failed To Initialize" message. It opened once no problem and now
it refuses for no reason. Anyone with information on this problem please share
and solution you might have.
|
|
|
|
| Author: | Leftoverbricks | | Posted: | Feb 4, 2023 11:19 | | Subject: | Re: Studio parts designer missing a lot | | Viewed: | 26 times | | Topic: | Related Software | |
|
| In General, hpoort writes:
| | In General, Leftoverbricks writes:
| | Yeah, I know: I should/could have this posted in the Studio forum but usually
only Silvain and I are online.
That's why I'm posting it here because I get more feedback here.
I'm complaining about the Parts Designer app. This is very limited when it
comes to tiles. 2x3 and 2x6 tiles are not supported while these parts are in
the BL catalog for a couple of years.
Question: Why is this app not up to date with the newer tiles?
|
Not true. You can decorate ANY part in PartDesigner (but indeed only a few selected
parts are presented in the widget).
Just head for the proper forum or help pages.
|
I've tried it numerous times and checked the help page but it was simply
not working when I tried.
I could import a PNG in Part Desinger AND place it on any brick, like the tiles
I've mentioned, but when I exported it to Studio only the part was exported,
not the design on it.
I tried again today and it worked. I *swear* I did exact the same thing as a
week ago (not working) and today it is working and even renders very well.
This leaves me speechless.
At least now I can redo my instructions for my MOC on Rebrickable.
Thanks again hpoort!
|
|
| Author: | hpoort | | Posted: | Feb 3, 2023 12:09 | | Subject: | Re: Studio parts designer missing a lot | | Viewed: | 29 times | | Topic: | Related Software | |
|
| In General, Leftoverbricks writes:
| | Yeah, I know: I should/could have this posted in the Studio forum but usually
only Silvain and I are online.
That's why I'm posting it here because I get more feedback here.
I'm complaining about the Parts Designer app. This is very limited when it
comes to tiles. 2x3 and 2x6 tiles are not supported while these parts are in
the BL catalog for a couple of years.
Question: Why is this app not up to date with the newer tiles?
|
Not true. You can decorate ANY part in PartDesigner (but indeed only a few selected
parts are presented in the widget).
Just head for the proper forum or help pages.
|
|
| Author: | Leftoverbricks | | Posted: | Feb 3, 2023 12:09 | | Subject: | Re: Studio parts designer missing a lot | | Viewed: | 21 times | | Topic: | Related Software | |
|
| In General, Leftoverbricks writes:
| | Yeah, I know: I should/could have this posted in the Studio forum but usually
only Silvain and I are online.
That's why I'm posting it here because I get more feedback here.
I'm complaining about the Parts Designer app. This is very limited when it
comes to tiles. 2x3 and 2x6 tiles are not supported while these parts are in
the BL catalog for a couple of years.
Question: Why is this app not up to date with the newer tiles?
|
Perhaps I should clarify that I want to make stickers/decals for the tiles mentioned
above. 
|
|
| Author: | Leftoverbricks | | Posted: | Feb 3, 2023 12:03 | | Subject: | Studio parts designer missing a lot | | Viewed: | 51 times | | Topic: | Related Software | |
|
| Yeah, I know: I should/could have this posted in the Studio forum but usually
only Silvain and I are online.
That's why I'm posting it here because I get more feedback here.
I'm complaining about the Parts Designer app. This is very limited when it
comes to tiles. 2x3 and 2x6 tiles are not supported while these parts are in
the BL catalog for a couple of years.
Question: Why is this app not up to date with the newer tiles?
|
|
| Author: | Nubs_Select | | Posted: | Jan 31, 2023 11:49 | | Subject: | Re: language | | Viewed: | 30 times | | Topic: | Related Software | |
|
| In Related Software, emilie7 writes:
| | In Related Software, Nubs_Select writes:
| | In Related Software, AndyABG writes:
| | Hi.
How or where can I set the language to German in the program (Studio 2.0).
?
Or is there a patch?
|
There is a dedicated studio forum here
https://forum.bricklink.com/
|
Thanks !
|
🍕
|
| Author: | emilie7 | | Posted: | Jan 31, 2023 11:45 | | Subject: | Re: language | | Viewed: | 33 times | | Topic: | Related Software | |
|
| In Related Software, Nubs_Select writes:
| | In Related Software, AndyABG writes:
| | Hi.
How or where can I set the language to German in the program (Studio 2.0).
?
Or is there a patch?
|
There is a dedicated studio forum here
https://forum.bricklink.com/
|
Thanks !
|
| Author: | Nubs_Select | | Posted: | Jan 31, 2023 11:37 | | Subject: | Re: language | | Viewed: | 28 times | | Topic: | Related Software | |
|
| In Related Software, AndyABG writes:
| | Hi.
How or where can I set the language to German in the program (Studio 2.0).
?
Or is there a patch?
|
There is a dedicated studio forum here
https://forum.bricklink.com/
|
| Author: | AndyABG | | Posted: | Jan 31, 2023 10:28 | | Subject: | Brick to program | | Viewed: | 68 times | | Topic: | Related Software | |
|
| | how can I load a part of the page into the program ? |
| Author: | AndyABG | | Posted: | Jan 31, 2023 07:45 | | Subject: | language | | Viewed: | 98 times | | Topic: | Related Software | |
|
| Hi.
How or where can I set the language to German in the program (Studio 2.0).
?
Or is there a patch?
|
| Author: | SylvainLS | | Posted: | Jan 28, 2023 18:28 | | Subject: | Re: Textures | | Viewed: | 24 times | | Topic: | Related Software | |
|
| In Related Software, jkhe writes:
| | why are all the textures for the bricks pink and the bricks aren’t even loading
so it just appears as blank.
|
See this thread on the dedicated forum: https://forum.bricklink.com/viewtopic.php?f=4&t=8549
|
| Author: | Sadler_Bricks | | Posted: | Jan 28, 2023 18:21 | | Subject: | Re: Textures | | Viewed: | 18 times | | Topic: | Related Software | |
|
| Try refreshing your aystem sounds like a graphics issue.
Sadler_bricks
|
| Author: | Lightning_Queer | | Posted: | Jan 27, 2023 12:33 | | Subject: | Select bricks inside groups | | Viewed: | 46 times | | Topic: | Related Software | |
|
| Hi, I need to change all colors of the bricks of my model, but they are in subgroups.
How can I do it?
|
| Author: | Nubs_Select | | Posted: | Jan 26, 2023 02:33 | | Subject: | Re: Textures | | Viewed: | 28 times | | Topic: | Related Software | |
|
| In Help, jkhe writes:
| | why are all the textures for the bricks pink and the bricks aren’t even loading
so it just appears as blank.
|
I think you might be talking about studio in which case there is a dedicated
forum here
https://forum.bricklink.com/
|
| Author: | jkhe | | Posted: | Jan 26, 2023 02:24 | | Subject: | Textures | | Viewed: | 80 times | | Topic: | Related Software | |
|
| why are all the textures for the bricks pink and the bricks aren’t even loading
so it just appears as blank.
|
| Author: | Nubs_Select | | Posted: | Jan 23, 2023 19:41 | | Subject: | Re: Studio Bug/ corrupted build | | Viewed: | 45 times | | Topic: | Related Software | |
|
| In Related Software, Canon_Morrow writes:
| | Good Evening,
When I updated brick link and loaded up one of my builds, it was corrupted. it
still had all of the parts, but they were all 0studs by 0 studs. does anyone
know how to fix this
Thank You
|
There is a dedicated studio forum here
https://forum.bricklink.com/
|
| Author: | Canon_Morrow | | Posted: | Jan 23, 2023 19:37 | | Subject: | Studio Bug/ corrupted build | | Viewed: | 75 times | | Topic: | Related Software | |
|
| Good Evening,
When I updated brick link and loaded up one of my builds, it was corrupted. it
still had all of the parts, but they were all 0studs by 0 studs. does anyone
know how to fix this
Thank You
|
|
|
| Author: | Antonio111 | | Posted: | Jan 23, 2023 13:32 | | Subject: | problem part desingner | | Viewed: | 73 times | | Topic: | Related Software | |
|
| Good evening, I also have a problem with the designer part when I open it and
want to build something, "NAN X NAN BRICKS" appears on the parts. Can
you help me to solve this problem. I installed and reinstalled the application
very many times. thank you
|
| Author: | Brickwilbo | | Posted: | Jan 22, 2023 06:18 | | Subject: | Re: Replace part in Stud.io? | | Viewed: | 19 times | | Topic: | Related Software | |
|
| In General, Xseros writes:
| | Hi. Ive finished making a model in Stud.io, but one of the parts is ridiculously
expensive. I have accidentally taken the wrong part. Is there an easy way to
just replace all those parts with a similar (and less expensive) part or must
I pick apart the model and replace all manually?
|
The Stud.io dedicated forum is here https://forum.bricklink.com/
|
|
| Author: | SylvainLS | | Posted: | Jan 21, 2023 16:54 | | Subject: | Re: Part Editor | | Viewed: | 37 times | | Topic: | Related Software | |
|
| In Related Software, FreakySnuke writes:
| | […]
The solution(s) outlined in this thread don't seem to work anymore for this
latest update bug - at least for me. I've completed wiped every possible
folder related to Stud.io 2.0 and Part Designer but upon reinstalling both programs
it still throws the same error.
|
1. You could (actually should) have answered in said thread 
2. You need to install December’s version of Studio (and refuse to update)
if you want to use PartDesigner before the devs fix the problem with the new
version.
(Explanations / links are in the thread, 3rd page.)
|
|
| Author: | FreakySnuke | | Posted: | Jan 21, 2023 16:37 | | Subject: | Re: Part Editor | | Viewed: | 32 times | | Topic: | Related Software | |
|
| In Related Software, SylvainLS writes:
| | In Related Software, Mr.fish writes:
| | In Related Software, Pizmology writes:
| | I have not been able to open Bricklink's part editor without it giving me
the "Failed To Initialize" message. It opened once no problem and now
it refuses for no reason. Anyone with information on this problem please share
and solution you might have.
|
I have the same problem! If you fixed it or somebody helped you it would be great,
if you could help me.
|
See https://forum.bricklink.com/viewtopic.php?f=10&t=8130
|
The solution(s) outlined in this thread don't seem to work anymore for this
latest update bug - at least for me. I've completed wiped every possible
folder related to Stud.io 2.0 and Part Designer but upon reinstalling both programs
it still throws the same error.
|
|
| Author: | SylvainLS | | Posted: | Jan 20, 2023 15:46 | | Subject: | Re: Part Editor | | Viewed: | 58 times | | Topic: | Related Software | |
|
| In Related Software, Mr.fish writes:
| | In Related Software, Pizmology writes:
| | I have not been able to open Bricklink's part editor without it giving me
the "Failed To Initialize" message. It opened once no problem and now
it refuses for no reason. Anyone with information on this problem please share
and solution you might have.
|
I have the same problem! If you fixed it or somebody helped you it would be great,
if you could help me.
|
See https://forum.bricklink.com/viewtopic.php?f=10&t=8130
|
|
| Author: | Mr.fish | | Posted: | Jan 20, 2023 15:45 | | Subject: | Re: Part Editor | | Viewed: | 47 times | | Topic: | Related Software | |
|
| In Related Software, Pizmology writes:
| | I have not been able to open Bricklink's part editor without it giving me
the "Failed To Initialize" message. It opened once no problem and now
it refuses for no reason. Anyone with information on this problem please share
and solution you might have.
|
I have the same problem! If you fixed it or somebody helped you it would be great,
if you could help me.
|
|
| Author: | Mr.fish | | Posted: | Jan 20, 2023 15:44 | | Subject: | Re: Part Editor | | Viewed: | 44 times | | Topic: | Related Software | |
|
| In Related Software, Pizmology writes:
| | I have not been able to open Bricklink's part editor without it giving me
the "Failed To Initialize" message. It opened once no problem and now
it refuses for no reason. Anyone with information on this problem please share
and solution you might have.
|
I have the same problem! If you fixed it or somebody helped you it would be great,
if you could help me.
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
Canada, Ontario
USA, Illinois
France, Provence-Alpes-Côte d'Azur
Spain, Comunidad Valenciana
)
)
)
)
Germany, Hessen
Netherlands, Gelderland
)
)
)
)
Finland, Uusimaa
Switzerland, Vaud
Ireland, Meath
Greece, Attica
India, Delhi
Italy, Lombardia
Hong Kong
Romania, Prahova