Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | elias3 | Posted: | Mar 11, 2019 07:54 | Subject: | Re: Factory assembled 4624 version (glued?) | Viewed: | 72 times | Topic: | Catalog | |
| In Catalog, normann1974 writes:
| | Rubber does harden over time as the plasticizers leak out. This hardening can
be accelerated by heat and light as well as changes in the amount of cross-linking
of the polymer chains. How old are these tires?
|
I can't tell. They were found in used bricks I bought. According to BrickLink:
1984-2018 (timeline of 4624 wheel).
/Jan
|
Hi
Yes they are factory pre-assembled wheels.
The first ones that came out were glued or pressed together.
Same for the 3464c02 and 4624c01 and 4624c02.
(from 1984-85 till I think begin 90s)
Also same for the first 6015 type with the 6014a.
The rubber is also harder, the assembles are softer in rubber.
Stefaan
|
|
Author: | elias3 | Posted: | Feb 16, 2019 11:34 | Subject: | Re: Inventory Change Request for Set 6659-1 | Viewed: | 28 times | Topic: | Inventories Requests | |
| In Inventories Requests, paulvdb writes:
| In Inventories Requests, SezaR writes:
| Hi,
I have worked with the inventory of this set.
Could you please share what catalog was included in the box? (what is the ID
number of the catalog?)
Thanks
Reza
|
117608-JA
|
Hi
it looks like this one is not yet in the catalog
Stefaan
|
Author: | elias3 | Posted: | Feb 15, 2019 20:08 | Subject: | Re: Inventory Change Request for Set 4547-1 | Viewed: | 19 times | Topic: | Inventories Requests | |
| In Inventories Requests, eversmann writes:
| Please make changes to the following inventory:
* Add 1 Part 2972a Light Gray Train Base 6 x 34 Split-Level with Bottom Tubes and Three Holes at Each End (Alternate)
|
Hi
Was this part in the alternate set?
Stefaan
|
|
Author: | elias3 | Posted: | Feb 6, 2019 13:32 | Subject: | Inventory Change Request for Set 60204-1 | Viewed: | 29 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 44302a Light Bluish Gray Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove (Alternate) (match ID 1)
* Change 2 Part Light Bluish Gray 44302b Hinge Plate 1 x 2 Locking with 2 Fingers on End without Bottom Groove {match ID 0 to 1}
Comments from Submitter:
2x part out and found the -a type (for the 4x in total)
|
|
Author: | elias3 | Posted: | Feb 5, 2019 08:32 | Subject: | Re: Inventory Change Request for Set 621-1 | Viewed: | 19 times | Topic: | Inventories Requests | |
| In Inventories Requests, elias3 writes:
| In Inventories Requests, axaday writes:
| In Inventories Requests, Rigonald writes:
| Please make changes to the following inventory:
* Add 1 Part 3010pb036u White Brick 1 x 4 with Car Grille Black Pattern (Undetermined Type)
|
They will want you to determine the type.
|
Hi
Was a version with the 1x4 grill brick exist?
http://www.peeron.com/scans/621-1/2
A sticker is used over 3x 1x4 plates.
Same as set 623
Stefaan
|
correction: 2x 1x4 plates etc...
|
|
Author: | elias3 | Posted: | Feb 5, 2019 08:14 | Subject: | Re: Inventory Change Request for Set 621-1 | Viewed: | 25 times | Topic: | Inventories Requests | |
| In Inventories Requests, axaday writes:
| In Inventories Requests, Rigonald writes:
| Please make changes to the following inventory:
* Add 1 Part 3010pb036u White Brick 1 x 4 with Car Grille Black Pattern (Undetermined Type)
|
They will want you to determine the type.
|
Hi
Was a version with the 1x4 grill brick exist?
http://www.peeron.com/scans/621-1/2
A sticker is used over 3x 1x4 plates.
Same as set 623
Stefaan
|
|
Author: | elias3 | Posted: | Feb 2, 2019 10:27 | Subject: | Re: Inventory Change Request for Set 8398-1 | Viewed: | 13 times | Topic: | Inventories Requests | |
| In Inventories Requests, shupLiak writes:
| Please make changes to the following inventory:
* Change 1 Part Reddish Brown {4095 Bar 6.6L with Stop Ring (Patio Umbrella Stand) to 63965 Bar 6L with Stop Ring}
Comments from Submitter:
in instructions there is a number 4538724 and that is not 6.6L bar, but only 6L bar
|
Is already as alternate in the inv. 😉
|
Author: | elias3 | Posted: | Jan 29, 2019 14:38 | Subject: | Re: A Smidgen of Lego History | Viewed: | 35 times | Topic: | Catalog | |
| In Catalog, randyf writes:
| In Catalog, elias3 writes:
| In Catalog, Hygrotus writes:
right, Duplo is 5y older as 'moi'
|
Happy Birthday, Stefaan!
Hope you have a great day filled with at least one new LEGO set!
Cheers,
Randy
|
thanks!! No new set at this moment, only Belgian chocolate bon-bons
|
|
Author: | elias3 | Posted: | Jan 29, 2019 13:09 | Subject: | Re: A Smidgen of Lego History | Viewed: | 30 times | Topic: | Catalog | |
| In Catalog, SylvainLS writes:
| In Catalog, WoutR writes:
| […]
| right, Duplo is 5y older as 'moi'
|
I guess that means: Happy birthday elias3!
|
Indeed, Happy Birthday!
|
thanks!!
|
| I see that I had Duplo's first push train
|
Well, the first train that looked like a train and had tracks to roll on.
There were Duplo connecting cars before 1980. Even without tracks, connected
cars very much spell train to a 2-year-old
|
|
Author: | elias3 | Posted: | Jan 29, 2019 13:08 | Subject: | Re: A Smidgen of Lego History | Viewed: | 21 times | Topic: | Catalog | |
| In Catalog, WoutR writes:
| In Catalog, elias3 writes:
| In Catalog, Hygrotus writes:
right, Duplo is 5y older as 'moi'
|
I guess that means: Happy birthday elias3!
|
thanks!!
|
I see that I had Duplo's first push train
|
|
Author: | elias3 | Posted: | Jan 29, 2019 11:50 | Subject: | Re: A Smidgen of Lego History | Viewed: | 40 times | Topic: | Catalog | |
| In Catalog, Hygrotus writes:
right, Duplo is 5y older as 'moi'
|
|
Author: | elias3 | Posted: | Jan 27, 2019 13:37 | Subject: | Re: Inventory Change Request for Set 40170-1 | Viewed: | 21 times | Topic: | Inventories Requests | |
| In Inventories Requests, chetzler writes:
| Please make changes to the following inventory:
* Add 1 Part 3068bpb1105 White Tile 2 x 2 with Newspaper 'THE LEGO NEWS' and 'The greatest hero ever!' Pattern (Alternate) (match ID 1)
* Change 1 Part White 3068bpb0431 Tile 2 x 2 with Newspaper 'THE LEGO NEWS', 'volume 3' and 'The greatest LEGO hero ever!' Pattern {match ID 0 to 1}
Comments from Submitter:
Parted out 5 of this set purchased at Mall of America, all five had the alternate tile.
|
Hi
That is correct, my part outs came with the alternate that was found.
Weird that I have not seen this.
Stefaan
|
|
Author: | elias3 | Posted: | Jan 14, 2019 04:28 | Subject: | Re: Inventory Change Request for Set 6440-1 | Viewed: | 25 times | Topic: | Inventories Requests | |
| In Inventories Requests, Jetflap writes:
| In Inventories Requests, Jetflap writes:
| Please make changes to the following inventory:
* Change {3 to 4} Part Yellow 3062b Brick, Round 1 x 1 Open Stud
Comments from Submitter:
4 are clearly required for the set, 2 are used in the fire extinguishers and 2 for the water cannons. See photo from back of box the shows 2 fire extinguishers and two alternate builds that require 4 of this part.
|
|
Hi
and add also 1x yellow tap
Peeron has also 4x 3062b and 2x 4599a
http://www.peeron.com/inv/sets/6440-1
my count: the MF (driver) use the tap/round brick inside and airtanks inside
the other minfig use the other tap/round brick with the axe (other axe still
on the truck)
Stefaan
|
|
Author: | elias3 | Posted: | Jan 13, 2019 07:32 | Subject: | Re: Inventory Change Request for Set 6394-1 | Viewed: | 19 times | Topic: | Inventories Requests | |
| In Inventories Requests, FreeStorm writes:
Hi
that's right, at that time no other type available.
you can always do a 'change' and not 'add' and 'delete'
Stefaan
|
|
Author: | elias3 | Posted: | Jan 13, 2019 07:29 | Subject: | Re: Inventory Change Request for Set 338-2 | Viewed: | 21 times | Topic: | Inventories Requests | |
| In Inventories Requests, VVV writes:
| Please make changes to the following inventory:
* Change {12 to 14} Part Yellow 3003old Brick 2 x 2 without Inside Supports
Comments from Submitter:
missing 2 probably from the table, i did get 14 from my build, looking at box and instruction
|
Hi
you're right, http://www.brickshelf.com/cgi-bin/gallery.cgi?f=308228
Stefaan
|
|
Author: | elias3 | Posted: | Jan 8, 2019 01:49 | Subject: | Re: Inventory Change Request for Set 365-2 | Viewed: | 20 times | Topic: | Inventories Requests | |
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Change {36 to 38} Part Blue 3003 Brick 2 x 2
* Change {26 to 28} Part Blue 3001 Brick 2 x 4
Comments from Submitter:
Sealed Set contained 2 more each of these pieces. It did not have an old brick separator, but I'll leave that alone.
|
Hi
About the brick separator, that's possible: first runs not, updated runs
with one?
Like this set from the same time:
Do you have the same box layout like the boxpictures in the catalog?
Stefaan
|
|
|
Author: | elias3 | Posted: | Jan 7, 2019 10:59 | Subject: | Inventory Change Request for Set 60082-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 3069bpb687 White Tile 1 x 2 with 'JC60082' License Plate Pattern (Sticker) - Set 60082 (Alternate)
|
|
Author: | elias3 | Posted: | Jan 7, 2019 01:38 | Subject: | Re: Inventory Change Request for Set 75163-1 | Viewed: | 26 times | Topic: | Inventories Requests | |
| In Inventories Requests, Hygrotus writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, elias3 writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, xdennisma writes:
| Please make changes to the following inventory:
* Change {3 to 2} Part Dark Bluish Gray 15392 Minifigure, Weapon Trigger for Gun, Mini Blaster / Shooter
Comments from Submitter:
The main inventory correctly states that there are 2x of the Modified 1 x 2 with Mini Blaster / Shooter, yet indicates that it comes with 3x of the Weapon Trigger for Gun, Mini Blaster / Shooter. While it is true that there are 3x of the triggers, 1x of them is an "extra", which is correctly stated in the Extra Items section of the inventory page. The main inventory should only have 2x of each of the blaster and trigger.
|
The official parts list in the instructions lists 3x of the trigger, and the
official part count for the set is 78 pieces. To have an official part count
of 78 pieces, all three of the triggers must be included in the Regular Items
section.
All of this fits with the definition of what goes in the Regular Items section
of an inventory: https://www.bricklink.com/help.asp?helpID=1562
"Regular Items - Parts required to build the main model and any secondary
models plus any other parts on the official parts list. In the absence
of an official parts list, the official parts count, the instructions, and/or
images on the packaging are used to determine as closely as possible the contents
of this section."
I highlighted the relevant section in italics.
Because the inventory is correct, this request will be rejected.
Cheers,
Randy
|
Hi Randy
Don't forget that the partslist not always is correct...
I did not check this set and inv.
Stefaan
|
It's correct. Our other Inventory Admin is the one who inventoried it.
- Randy
|
I confirm it once again. I had 4 triggers when opened it But only two were
used in built, one is always axtra so I was puzzled that time what to do with
this fourth one That time I added it as second extra and there was a note
about it that in parts list is three of them (now note is deleted). Then Robert
added this new definition and set was adjusted to match parts count on box
So you have whole history of it.
This whole year was strange with Microfigters triggers on parts lists and extra
one included
Check also those:
So it is not an incident. Some experiment with adding more extra triggers? I
don't know but it not happeed in next series in next year of Microfighters
P.S.
I just remember whole winter of the year 2017 was strange with those triggers
in SW
5 shooters, 6 triggers on parts list, plus another one extra in set
6 shooters, 7 triggers on parts list, plus another one extra in set
But in next wave of battlepacks everything back to normal
5 shooters, 5 triggers on parts list, plus another one extra in set.
6 shooters, 6 triggers on parts list, plus another one extra in set.
I have all those sets and they are checked with sealed set content
So this is not a mistake on parts list, such parts list with more triggers are
for four sets in 2017
Marek
|
Thank you!
|
|
Author: | elias3 | Posted: | Jan 7, 2019 01:06 | Subject: | Re: Inventory Change Request for Set 75163-1 | Viewed: | 25 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| In Inventories Requests, xdennisma writes:
| Please make changes to the following inventory:
* Change {3 to 2} Part Dark Bluish Gray 15392 Minifigure, Weapon Trigger for Gun, Mini Blaster / Shooter
Comments from Submitter:
The main inventory correctly states that there are 2x of the Modified 1 x 2 with Mini Blaster / Shooter, yet indicates that it comes with 3x of the Weapon Trigger for Gun, Mini Blaster / Shooter. While it is true that there are 3x of the triggers, 1x of them is an "extra", which is correctly stated in the Extra Items section of the inventory page. The main inventory should only have 2x of each of the blaster and trigger.
|
The official parts list in the instructions lists 3x of the trigger, and the
official part count for the set is 78 pieces. To have an official part count
of 78 pieces, all three of the triggers must be included in the Regular Items
section.
All of this fits with the definition of what goes in the Regular Items section
of an inventory: https://www.bricklink.com/help.asp?helpID=1562
"Regular Items - Parts required to build the main model and any secondary
models plus any other parts on the official parts list. In the absence
of an official parts list, the official parts count, the instructions, and/or
images on the packaging are used to determine as closely as possible the contents
of this section."
I highlighted the relevant section in italics.
Because the inventory is correct, this request will be rejected.
Cheers,
Randy
|
Hi Randy
Don't forget that the partslist not always is correct...
I did not check this set and inv.
Stefaan
|
|
Author: | elias3 | Posted: | Jan 6, 2019 06:10 | Subject: | Inventory Change Request for Set 60081-1 | Viewed: | 14 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part Black {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (undetermined type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}
* Change 2 Part Light Bluish Gray {44567 Hinge Plate 1 x 2 Locking with 1 Finger on Side (undetermined type) to 44567b Hinge Plate 1 x 2 Locking with 1 Finger on Side without Bottom Groove}
Comments from Submitter:
source: part out sets and own collection
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|