Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | InsanityBeckonz | Posted: | Jan 15, 2021 07:57 | Subject: | Inventory Change Request for Set 70641-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 64225pb030L Green Wedge 4 x 3 No Studs with Black and Yellow Vent Pattern Model Left Side (Sticker) - Set 70641 (Counterpart)
|
|
Author: | msSquirrel | Posted: | Jan 15, 2021 06:04 | Subject: | Re: Inventory Change Request for Set 10584-1 | Viewed: | 19 times | Topic: | Inventories Requests | |
| | In Inventories Requests, randyf writes:
| In Inventories Requests, msSquirrel writes:
| Please make changes to the following inventory:
* Add 1 Minifig 47394pb180a Duplo Figure Lego Ville, Female, Medium Blue Legs, Red Sweater with Diamond Pattern, Reddish Brown Hair, Blue Eyes, Oval Eyes (Alternate)
* Add 1 Minifig 47205pb060 Duplo Figure Lego Ville, Child Girl, Red Legs, Medium Blue Jacket over Shirt with Flower, Reddish Brown Pigtails, Round Eyes (Alternate)
* Add 1 Minifig 47394pb244 Duplo Figure Lego Ville, Male, Medium Blue Legs, Orange Vest, Dark Green Plaid Shirt, Bright Green Arms, Red Cap, Round Eyes (Alternate)
|
The following video shows a sealed set being opened that contains 47394pb180a,
but it still contains the older versions of the other two figures:
https://www.youtube.com/watch?v=MwvtKQn-3kc
Cheers,
Randy
|
|
Unfortunately I did not find a video review, I am attaching a link to the photo
review confirming the new version for girl
https://irecommend.ru/content/ogromnyi-konstruktor-lego-duplo-kotoryi-ne-ostavit-ravnodushnym-lyubogo-rebenka
|
|
Author: | Brickitty | Posted: | Jan 14, 2021 22:38 | Subject: | Inventory Change Request for Set 41288-1 | Viewed: | 20 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 98835pb022 Red Vehicle, Mudguard 3 x 4 x 1 2/3 Curved Front with Pearl Gold Mojo Jojo Pattern (Sticker) - Set 41288 (Counterpart)
|
|
Author: | platinum_lego | Posted: | Jan 14, 2021 20:07 | Subject: | Inventory Change Request for Set 41351-1 | Viewed: | 25 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 87079pb832 Dark Pink Tile 2 x 4 with White and Silvery Pink Checkered Mat and Black Tassels Pattern (Sticker) - Set 41351 (Counterpart)
* Add 1 Part 87079pb831 Medium Lavender Tile 2 x 4 with Bright Pink Paint Brush, Light Aqua Paint Swirl and White Checkered Background Pattern (Sticker) - Set 41351 (Counterpart)
* Add 1 Part 15068pb314 Medium Lavender Slope, Curved 2 x 2 with Bright Pink Paint Brush and Light Aqua Paint Swirl Pattern (Sticker) - Set 41351 (Counterpart)
|
|
Author: | SeriousBricksNL | Posted: | Jan 14, 2021 12:14 | Subject: | Re: Inventory Change Request for Set 9699-1 | Viewed: | 20 times | Topic: | Inventories Requests | |
| Hi Paul,
yes I have several of this sets and they all have the door with the handle build
in the glass
In Inventories Requests, BricksThatStick writes:
| In Inventories Requests, SeriousBricks writes:
| Please make changes to the following inventory:
* Add 1 Part 60797c01 Red Door 1 x 4 x 6 with 3 Panes and Stud Handle with Trans-Light Blue Glass
Comments from Submitter:
This is the original door, 1 per set. The other door Item No x39
|
Thanks for this change request - can you confirm your source for this change?
Do you have the original set?
I'm only checking as the door you are requesting to change it to is a different
design altogether - with the handle built into the glass rather than the frame:
[p=60797c01]
* | | x39c01 Door 1 x 4 x 6 with 3 Panes and Square Handle with Fixed Trans-Light Blue Glass Parts: Door |
Thanks,
Paul.
|
|
|
Author: | lckliment | Posted: | Jan 14, 2021 10:54 | Subject: | Inventory Change Request for Set 7283-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 6636pb009 Dark Blue Tile 1 x 6 with SW Vulture Droid Triangles Pattern 1 (Sticker) - Set 7256 (Counterpart)
* Add 2 Part 6636pb010 Dark Blue Tile 1 x 6 with SW Vulture Droid Triangles Pattern 2 (Sticker) - Set 7256 (Counterpart)
* Add 2 Part 6636pb011 Dark Blue Tile 1 x 6 with SW Vulture Droid Triangles Pattern 3 (Sticker) - Set 7256 (Counterpart)
* Add 2 Part 6636pb012 Dark Blue Tile 1 x 6 with SW Vulture Droid Triangles Pattern 4 (Sticker) - Set 7256 (Counterpart)
* Add 2 Part 3068bpb0097 Dark Blue Tile 2 x 2 with Groove with 3 White Triangles, Black Stripe and 2 Wear Marks Pattern (Sticker) - Set 7256 (Counterpart)
* Add 2 Part 3068bpb0096 Dark Blue Tile 2 x 2 with Groove with 3 White Triangles, Black Stripe and 3 Wear Marks Pattern (Sticker) - Set 7256 (Counterpart)
* Add 2 Part 47753pb004 Dark Blue Wedge 4 x 4 No Studs with Hexagonal SW Confederacy (CIS) Pattern (Sticker) - Set 7256 (Counterpart)
* Add 2 Part 47753pb005 Dark Bluish Gray Wedge 4 x 4 No Studs with Two Red Arrows on Dark Bluish Gray Background Pattern (Sticker) - Set 7256 (Counterpart)
Comments from Submitter:
Instruction Manual — Set contains two Vulture Droids identical to the one included in 7256.
|
|
Author: | lckliment | Posted: | Jan 14, 2021 10:48 | Subject: | Re: Inventory Change Request for Set 7283-1 | Viewed: | 15 times | Topic: | Inventories Requests | |
| In Inventories Requests, lkliment2 writes:
| Please make changes to the following inventory:
* Add 4 Part 3068bpb0142 Black Tile 2 x 2 with Groove with Grille Five Bar Black and Gray Pattern (Sticker) - Set 7252 (Counterpart)
* Add 1 Part 3068bpb1300 Dark Blue Tile 2 x 2 with Groove with Dark Bluish Gray Hexagon, 6 White Trapezoids and 3 Wear Marks Pattern (Sticker) - Set 7252 (Counterpart)
* Add 1 Part 3068bpb0139 Dark Blue Tile 2 x 2 with Groove with Dark Bluish Gray Hexagon, 6 White Trapezoids and 4 Wear Marks Pattern (Sticker) - Set 7252 (Counterpart)
* Add 2 Part 3068bpb0140 Sand Blue Tile 2 x 2 with Groove with 3 White Triangles, Dark Blue Stripe and Wear Marks Adjacent Pattern (Sticker) - Set 7252 (Counterpart)
* Add 1 Part 3068bpb0141 Sand Blue Tile 2 x 2 with Groove with One White Triangle and Wear Marks Adjacent Pattern (Sticker) - Set 7252 (Counterpart)
* Add 1 Part 3068bpb0398 Sand Blue Tile 2 x 2 with Groove with One White Triangle and Wear Marks Opposite Pattern (Sticker) - Set 7252 (Counterpart)
Comments from Submitter:
Instruction Manual
|
Technically this set contains 7252 Droid Tri-Fighter. As such, and per the instructions,
I think it would make sense to have the stickered parts from the Tri-Fighter
included. I will also make a request to add the Vulture Droid stickers.
|
|
Author: | lckliment | Posted: | Jan 14, 2021 10:41 | Subject: | Inventory Change Request for Set 7283-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 4 Part 3068bpb0142 Black Tile 2 x 2 with Groove with Grille Five Bar Black and Gray Pattern (Sticker) - Set 7252 (Counterpart)
* Add 1 Part 3068bpb1300 Dark Blue Tile 2 x 2 with Groove with Dark Bluish Gray Hexagon, 6 White Trapezoids and 3 Wear Marks Pattern (Sticker) - Set 7252 (Counterpart)
* Add 1 Part 3068bpb0139 Dark Blue Tile 2 x 2 with Groove with Dark Bluish Gray Hexagon, 6 White Trapezoids and 4 Wear Marks Pattern (Sticker) - Set 7252 (Counterpart)
* Add 2 Part 3068bpb0140 Sand Blue Tile 2 x 2 with Groove with 3 White Triangles, Dark Blue Stripe and Wear Marks Adjacent Pattern (Sticker) - Set 7252 (Counterpart)
* Add 1 Part 3068bpb0141 Sand Blue Tile 2 x 2 with Groove with One White Triangle and Wear Marks Adjacent Pattern (Sticker) - Set 7252 (Counterpart)
* Add 1 Part 3068bpb0398 Sand Blue Tile 2 x 2 with Groove with One White Triangle and Wear Marks Opposite Pattern (Sticker) - Set 7252 (Counterpart)
Comments from Submitter:
Instruction Manual
|
|
Author: | Hygrotus | Posted: | Jan 14, 2021 04:15 | Subject: | Inventory Change Request for Set 30343-1 | Viewed: | 24 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 11477pb106 Blue Slope, Curved 2 x 1 with McLaren Logo Pattern (Sticker) - Set 30343 (Counterpart)
* Add 1 Part 93273pb141L Blue Slope, Curved 4 x 1 Double with McLaren Elva Headlight Pattern Model Left Side (Sticker) - Set 30343 (Counterpart)
* Add 1 Part 93273pb141R Blue Slope, Curved 4 x 1 Double with McLaren Elva Headlight Pattern Model Right Side (Sticker) - Set 30343 (Counterpart)
* Add 2 Part 61678pb141 Blue Slope, Curved 4 x 1 with McLaren Elva Air Intake Pattern (Sticker) - Set 30343 (Counterpart)
|
|
Author: | msSquirrel | Posted: | Jan 14, 2021 02:25 | Subject: | Inventory Change Request for Set 3090-1 | Viewed: | 28 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part horse02c01pb01 Black Duplo Horse with Movable Head, Silver Mane, Saddle and Hearts Pattern
* Add 1 Part horse02c01pb05 Black Duplo Horse with Movable Head, Silver Mane and Hearts Pattern
|
Author: | msSquirrel | Posted: | Jan 14, 2021 02:24 | Subject: | Inventory Change Request for Set 3615-2 | Viewed: | 16 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part 31050 Bright Green Duplo Dinosaur Tyrannosaurus rex Adult (Undefined Entry)
* Add 1 Part 31050pb01 Bright Green Duplo Dinosaur Tyrannosaurus rex Adult with Eyes Pattern
|
Author: | msSquirrel | Posted: | Jan 14, 2021 02:23 | Subject: | Inventory Change Request for Set 9131-1 | Viewed: | 14 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part 31050 Bright Green Duplo Dinosaur Tyrannosaurus rex Adult (Undefined Entry)
* Add 1 Part 31050pb01 Bright Green Duplo Dinosaur Tyrannosaurus rex Adult with Eyes Pattern
|
Author: | msSquirrel | Posted: | Jan 14, 2021 02:22 | Subject: | Inventory Change Request for Set 2601-1 | Viewed: | 11 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part 31050 Red Duplo Dinosaur Tyrannosaurus rex Adult (Undefined Entry)
* Add 1 Part 31050pb02 Red Duplo Dinosaur Tyrannosaurus rex Adult with Eyes and Yellow Spots Pattern
|
Author: | msSquirrel | Posted: | Jan 14, 2021 02:21 | Subject: | Inventory Change Request for Set 2851-1 | Viewed: | 15 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part 31050 Red Duplo Dinosaur Tyrannosaurus rex Adult (Undefined Entry)
* Add 1 Part 31050pb02 Red Duplo Dinosaur Tyrannosaurus rex Adult with Eyes and Yellow Spots Pattern
|
Author: | msSquirrel | Posted: | Jan 14, 2021 02:21 | Subject: | Inventory Change Request for Set 9195-1 | Viewed: | 14 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part 31050 Red Duplo Dinosaur Tyrannosaurus rex Adult (Undefined Entry)
* Add 1 Part 31050pb02 Red Duplo Dinosaur Tyrannosaurus rex Adult with Eyes and Yellow Spots Pattern
|
Author: | msSquirrel | Posted: | Jan 14, 2021 02:20 | Subject: | Inventory Change Request for Set 9194-1 | Viewed: | 11 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part 31050 Red Duplo Dinosaur Tyrannosaurus rex Adult (Undefined Entry)
* Add 1 Part 31050pb02 Red Duplo Dinosaur Tyrannosaurus rex Adult with Eyes and Yellow Spots Pattern
|
Author: | msSquirrel | Posted: | Jan 14, 2021 02:20 | Subject: | Inventory Change Request for Set 9196-1 | Viewed: | 12 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part 31050 Red Duplo Dinosaur Tyrannosaurus rex Adult (Undefined Entry)
* Add 1 Part 31050pb02 Red Duplo Dinosaur Tyrannosaurus rex Adult with Eyes and Yellow Spots Pattern
|
Author: | msSquirrel | Posted: | Jan 14, 2021 02:18 | Subject: | Inventory Change Request for Set 9213-1 | Viewed: | 17 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 2 Part 31050 Red Duplo Dinosaur Tyrannosaurus rex Adult (Undefined Entry)
* Add 2 Part 31050pb02 Red Duplo Dinosaur Tyrannosaurus rex Adult with Eyes and Yellow Spots Pattern
|
Author: | msSquirrel | Posted: | Jan 14, 2021 02:18 | Subject: | Inventory Change Request for Set 2605-1 | Viewed: | 13 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part 31050 Red Duplo Dinosaur Tyrannosaurus rex Adult (Undefined Entry)
* Add 1 Part 31050pb02 Red Duplo Dinosaur Tyrannosaurus rex Adult with Eyes and Yellow Spots Pattern
|
Author: | msSquirrel | Posted: | Jan 14, 2021 02:17 | Subject: | Inventory Change Request for Set 2604-1 | Viewed: | 16 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part 31050 Red Duplo Dinosaur Tyrannosaurus rex Adult (Undefined Entry)
* Add 1 Part 31050pb02 Red Duplo Dinosaur Tyrannosaurus rex Adult with Eyes and Yellow Spots Pattern
|
|
Author: | randyf | Posted: | Jan 14, 2021 01:12 | Subject: | Re: Inventory Change Request for Set 76048-1 | Viewed: | 21 times | Topic: | Inventories Requests | |
| In Inventories Requests, Vanguard writes:
| In Inventories Requests, Vanguard writes:
| Please make changes to the following inventory:
* Add 1 Part 30350b Black Tile, Modified 2 x 3 with 2 Open O Clips
Comments from Submitter:
This should be added to the counterparts section. It is a piece that has a sticker on it. Sources 1) I'm an owner of this set 2) The sticker sheet clearly shows 5 stickers, but there are only 4 counterpart pieces.
|
Sorry. I didn't know how to upload a picture of the part with the sticker
applied.
Official name should be:
Black Tile, Modified 2 x 3 with 2 Open O Clips with Red Octopus (Marvel HYDRA
Logo) Pattern (Sticker)
|
This request will not be accepted.
The proper procedure to add a stickered Counterpart to BrickLink and a set inventory
is as follows:
(1) Add the stickered part to the BrickLink catalog:
https://www.bricklink.com/wantedCatalog.asp?catType=P
Help on adding an item to the BrickLink catalog:
https://www.bricklink.com/help.asp?helpID=71
(2) Add an image to the BrickLink catalog for the stickered part:
https://www.bricklink.com/v2/catalog/catalogImageAdd.page?itemType=P
Help on adding an image to the BrickLink catalog:
https://www.bricklink.com/help.asp?helpID=87
(3) Fill out an Inventory Change Request to add the stickered part to the set
inventory after it is approved by a Catalog Associate or Catalog Administrator:
https://www.bricklink.com/catalogInvChange.asp?itemType=S
----------
The following videos are great tutorials for the process:
https://www.bricklink.com/message.asp?ID=1191009
Cheers,
Randy
|
|
|
Author: | Vanguard | Posted: | Jan 13, 2021 15:59 | Subject: | Re: Inventory Change Request for Set 76048-1 | Viewed: | 10 times | Topic: | Inventories Requests | |
| In Inventories Requests, Vanguard writes:
| Please make changes to the following inventory:
* Add 1 Part 30350b Black Tile, Modified 2 x 3 with 2 Open O Clips
Comments from Submitter:
This should be added to the counterparts section. It is a piece that has a sticker on it. Sources 1) I'm an owner of this set 2) The sticker sheet clearly shows 5 stickers, but there are only 4 counterpart pieces.
|
Sorry. I didn't know how to upload a picture of the part with the sticker
applied.
Official name should be:
Black Tile, Modified 2 x 3 with 2 Open O Clips with Red Octopus (Marvel HYDRA
Logo) Pattern (Sticker)
|
|
Author: | Vanguard | Posted: | Jan 13, 2021 15:57 | Subject: | Inventory Change Request for Set 76048-1 | Viewed: | 26 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 30350b Black Tile, Modified 2 x 3 with 2 Open O Clips
Comments from Submitter:
This should be added to the counterparts section. It is a piece that has a sticker on it. Sources 1) I'm an owner of this set 2) The sticker sheet clearly shows 5 stickers, but there are only 4 counterpart pieces.
|
|
Author: | laulainendebra | Posted: | Jan 13, 2021 15:20 | Subject: | Inventory Change Request for Set 76126-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 64680 Dark Blue Technic, Panel Fairing #14 Large Short Smooth, Side B (Counterpart)
Comments from Submitter:
All the counterparts with stickers are not listed. Please add these.
|
Author: | paulvdb | Posted: | Jan 13, 2021 08:56 | Subject: | Re: Inventory Change Request for Set 70810-1 | Viewed: | 17 times | Topic: | Inventories Requests | |
| In Inventories Requests, fortressbricks writes:
| Please make changes to the following inventory:
* Add 1 Part 40359a Pearl Gold Minifigure, Utensil Key
Comments from Submitter:
Shows in step 34 on page on 195 of instruction booklet
|
The key comes on a sprue and is already in the inventory.
[p=40359c01,115]
|
Author: | fortressbricks | Posted: | Jan 13, 2021 08:15 | Subject: | Inventory Change Request for Set 70810-1 | Viewed: | 36 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 40359a Pearl Gold Minifigure, Utensil Key
Comments from Submitter:
Shows in step 34 on page on 195 of instruction booklet
|
Author: | SimonBrix | Posted: | Jan 13, 2021 07:36 | Subject: | Inventory Change Request for Set 70425-1 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 28621pb0023 Trans-Neon Green Minifigure, Head Alien Ghost with Yellowish Green Face, Glasses, Angry and Flames in Back Pattern - Vented Stud (Alternate) (match ID 961484)
|
Author: | yensid | Posted: | Jan 13, 2021 04:09 | Subject: | Inventory Change Request for Set 60174-1 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 47753pb105L Blue Wedge 4 x 4 No Studs with White 'POLICE' Pattern Model Left Side (Sticker) - Set 60174 (Counterpart)
* Add 1 Part 47753pb105R Blue Wedge 4 x 4 No Studs with White 'POLICE' Pattern Model Right Side (Sticker) - Set 60174 (Counterpart)
|
|
Author: | Roxyncz | Posted: | Jan 13, 2021 04:03 | Subject: | Inventory Change Request for Set 75934-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 2335pb221 White Flag 2 x 2 Square with 'GIFT SHOP', Lego Box and Dinosaur Pattern (Sticker) - Set 75934 (Counterpart)
* Add 1 Part 26603pb123 White Tile 2 x 3 with 'COMING SOON' and Dinosaur Pattern (Sticker) - Set 75934 (Counterpart)
|
|
Author: | yensid | Posted: | Jan 13, 2021 04:02 | Subject: | Inventory Change Request for Set 75204-1 | Viewed: | 24 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 2390pb004R Tan Tail 8 x 1 with Stepped Fin with Light Bluish Gray Decoration Pattern Model Right Side (Sticker) - Set 75204 (Counterpart)
* Add 1 Part 2390pb004L Tan Tail 8 x 1 with Stepped Fin with Light Bluish Gray Decoration Pattern Model Left Side (Sticker) - Set 75204 (Counterpart)
|
Author: | SezaR | Posted: | Jan 12, 2021 17:41 | Subject: | Inventory Change Request for Set 379-1 | Viewed: | 30 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change {3 to 4} Part Green 3741 Plant Flower Stem
* Change {1 to 2} Part Red 3742c01 Plant Flower Small, 4 on Sprue
|
Author: | Roxyncz | Posted: | Jan 12, 2021 16:56 | Subject: | Inventory Change Request for Set 75931-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 2431pb661 Yellow Tile 1 x 4 with Black and Yellow Danger Stripes (Yellow Corners) Pattern (Sticker) - Set 75931 (Counterpart)
|
|
Author: | Brickitty | Posted: | Jan 12, 2021 14:51 | Subject: | Inventory Change Request for Set 8167-1 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 32271pb022L Black Technic, Liftarm 1 x 9 Bent (7 - 3) Thick with Orange Flames Pattern Left Side A (Sticker) - Set 8167 (Counterpart)
* Add 1 Part 32271pb023L Black Technic, Liftarm 1 x 9 Bent (7 - 3) Thick with Orange Flames Pattern Left Side B (Sticker) - Set 8167 (Counterpart)
* Add 1 Part 32271pb022R Black Technic, Liftarm 1 x 9 Bent (7 - 3) Thick with Orange Flames Pattern Right Side A (Sticker) - Set 8167 (Counterpart)
* Add 1 Part 32271pb023R Black Technic, Liftarm 1 x 9 Bent (7 - 3) Thick with Orange Flames Pattern Right Side B (Sticker) - Set 8167 (Counterpart)
Comments from Submitter:
These were added to the catalog a month ago but haven't been assigned to the correct set yet.
|
|
Author: | Roxyncz | Posted: | Jan 12, 2021 13:18 | Subject: | Inventory Change Request for Set 41157-1 | Viewed: | 37 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 3068bpb1493 Reddish Brown Tile 2 x 2 with Groove with Letter R, Rapunzel and Frederic Pattern (Sticker) - Set 41157 (Counterpart)
* Add 1 Part 3069bpb863 White Tile 1 x 2 with Groove with Leaves, Letter R and Writing Pattern (Sticker) - Set 41157 (Counterpart)
* Add 1 Part 87079pb830 Magenta Tile 2 x 4 with Owls and Appliques Pattern (Sticker) - Set 41157 (Counterpart)
* Add 2 Part 87079pb829 Magenta Tile 2 x 4 with Black Bird and Column Pattern (Sticker) - Set 41157 (Counterpart)
|
|
Author: | PotterMoreBrick | Posted: | Jan 11, 2021 19:25 | Subject: | Inventory Change Request for Set 75291-1 | Viewed: | 33 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 10 Part 44861 Dark Bluish Gray Plate, Modified 1 x 2 with Open O Clip on Top (Alternate) (match ID 1035448 )
Comments from Submitter:
10 Sealed sets all contained 44861 instead of 92280
|
|
Author: | paulvdb | Posted: | Jan 11, 2021 08:36 | Subject: | Inventory Change Request for Set 41921-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 10 Part 3070bpb197 White Tile 1 x 1 with Crescent Moon in Scrapbook Frame with Magenta Background Pattern (Alternate) (match ID 1)
* Add 1 Part 3070bpb197 White Tile 1 x 1 with Crescent Moon in Scrapbook Frame with Magenta Background Pattern (Alternate) (match ID 2)
* Add 10 Part 3070bpb198 White Tile 1 x 1 with Crystal Ball with Sparkles on Medium Lavender Background Pattern (Alternate) (match ID 1)
* Add 1 Part 3070bpb198 White Tile 1 x 1 with Crystal Ball with Sparkles on Medium Lavender Background Pattern (Alternate) (match ID 2)
* Add 10 Part 3070bpb199 White Tile 1 x 1 with Dark Purple Heart with 'B.F.F' on Bright Pink Background Pattern (Alternate) (match ID 1)
* Add 1 Part 3070bpb199 White Tile 1 x 1 with Dark Purple Heart with 'B.F.F' on Bright Pink Background Pattern (Alternate) (match ID 2)
Comments from Submitter:
Adding the last three random tiles.
|
|
Author: | jedvii | Posted: | Jan 11, 2021 08:02 | Subject: | Inventory Change Request for Set 21324-1 | Viewed: | 26 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 3069bpb847 Light Bluish Gray Tile 1 x 2 with Groove with Vehicle Control Panel Two Sliders Pattern (Alternate) (match ID 3)
* Change 1 Part Dark Bluish Gray 3069bpc1 Tile 1 x 2 with Groove with Vehicle Control Panel Pattern {match ID 0 to 3}
Comments from Submitter:
adding Light Bluish Gray 3069bpb847 as an alternate piece to Dark Bluish Gray 3069pc1. I have personally seen this alternate piece in 2 sets.
|
|
Author: | Cor3y | Posted: | Jan 11, 2021 04:05 | Subject: | Inventory Change Request for Set 21318-1 | Viewed: | 31 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 3069bpb779 White Tile 1 x 2 with Groove with Envelope with Red Wax Seal and Gray Highlights Pattern (match ID 3)
* Change 1 Part White 3069bpx40 Tile 1 x 2 with Groove with Mail Envelope, Cursive Script and Seal Pattern {match ID 0 to 3}
Comments from Submitter:
3069bpx40 in some later print run of the set is substituted by 3069bpb779. I opened two sets, and both had this new piece instead of the older one given in the instructions.
I tried to re-order the piece from lego, but the inventory of the set on their site (verify by asking to get a missing piece) gives only the latter option (3069bpb779).
|
|
Author: | Hygrotus | Posted: | Jan 10, 2021 15:23 | Subject: | Inventory Change Request for Set 71730-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 40145c01 Black Plate, Round 2 x 2 Thin with Rotation Stem with Black Tire 14mm D. x 4mm Smooth Small Single (40145 / 59895) (Counterpart)
|
Author: | Hygrotus | Posted: | Jan 10, 2021 15:22 | Subject: | Inventory Change Request for Set 71733-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 40145c01 Black Plate, Round 2 x 2 Thin with Rotation Stem with Black Tire 14mm D. x 4mm Smooth Small Single (40145 / 59895) (Counterpart)
|
|
Author: | jethroo | Posted: | Jan 10, 2021 12:08 | Subject: | Inventory Change Request for Set 75934-1 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 3068bpb1490 Green Tile 2 x 2 with Groove with 'Jurassic' and Velociraptor Breaking Through Wall on Green Background Pattern (Sticker) - Set 75934 (Counterpart)
* Add 1 Part 3068bpb1491 Red Tile 2 x 2 with Groove with Isla Nebular on Red Background Pattern (Sticker) - Set 75934 (Counterpart)
* Add 1 Part 3068bpb1492 Yellow Tile 2 x 2 with Groove with Dinosaur Shadow Play in Front of Landscape on Yellow Background Pattern (Sticker) - Set 75934 (Counterpart)
|
|
Author: | StormChaser | Posted: | Jan 10, 2021 06:36 | Subject: | Re: Inventory Change Request for Set 8038-1 | Viewed: | 21 times | Topic: | Inventories Requests | |
| In Inventories Requests, Sticksi writes:
| Please make changes to the following inventory:
* Add 1 Part 2445 Black Plate 2 x 12 (match ID 2445)
Comments from Submitter:
Hello, this plate 2x12 black is not listet in the instruction list on the last pages from the book 1. But it is in this set on the instruction book 1 page 63. Without this item it is not possible to build.
|
This 2 x 12 plate item already appears in BrickLink's inventory for this
set. It was added to the set inventory on June 20th, 2009. Your request to
add a second 2 x 12 plate was rejected.
|
|
Author: | Sticksi | Posted: | Jan 10, 2021 06:23 | Subject: | Inventory Change Request for Set 8038-1 | Viewed: | 30 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 2445 Black Plate 2 x 12 (match ID 2445)
Comments from Submitter:
Hello, this plate 2x12 black is not listet in the instruction list on the last pages from the book 1. But it is in this set on the instruction book 1 page 63. Without this item it is not possible to build.
|
|
Author: | gunga | Posted: | Jan 9, 2021 20:07 | Subject: | Inventory Change Request for Set 70912-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 3245cpb133 Black Brick 1 x 2 x 2 with Inside Stud Holder with X-Ray Skeleton Bottom Pattern (Sticker) - Set 70912 (Counterpart)
* Add 2 Part 87544pb065 Black Panel 1 x 2 x 3 with Side Supports - Hollow Studs with X-Ray Skeleton Top and Red Bull's Eye Pattern (Sticker) - Set 70912 (Counterpart)
* Add 1 Part 59349pb212 Trans-Clear Panel 1 x 6 x 5 with 2 Light Bluish Gray Panels, Red Stripes and Vents Pattern (Stickers) - Set 70912 (Counterpart)
* Add 1 Part 59349pb213 Trans-Clear Panel 1 x 6 x 5 with Light Bluish Gray Panel, Red Stripe, Vents and Scanner Monitor Pattern (Stickers) - Set 70912 (Counterpart)
* Add 1 Part 15210pb087 White Road Sign 2 x 2 Square with Open O Clip with 'NO CAKES', 'NO SHARP EDGES' and 'NO CHROME PIECES' Pattern (Sticker) - Set 70912 (Counterpart)
* Add 1 Part 15210pb086 White Road Sign 2 x 2 Square with Open O Clip with 'STOP' and 'SECURITY SCREENING PART 1' Pattern (Sticker) - Set 70912 (Counterpart)
* Add 1 Part 87079pb828 Light Bluish Gray Tile 2 x 4 with 'ARKHAM' and Stone Pattern (Sticker) - Set 70912 (Counterpart)
|
|
Author: | gunga | Posted: | Jan 9, 2021 20:01 | Subject: | Inventory Change Request for Set 41334-1 | Viewed: | 15 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 60581pb159 White Panel 1 x 4 x 3 with Side Supports - Hollow Studs with Castle and Dragon Pattern (Sticker) - Set 41334 (Counterpart)
* Add 1 Part 63864pb130 White Tile 1 x 3 with Triangle Flags Banner and Dots Pattern (Sticker) - Set 41334 (Counterpart)
|
Author: | gunga | Posted: | Jan 9, 2021 19:57 | Subject: | Inventory Change Request for Set 41325-1 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 3069bpb862 Medium Azure Tile 1 x 2 with Groove with Speaker Grille, Buttons and 'M' Pattern (Sticker) - Set 41325 (Counterpart)
|
|
Author: | BricksThatStick | Posted: | Jan 9, 2021 17:11 | Subject: | Re: Inventory Change Request for Set 10764-1 | Viewed: | 22 times | Topic: | Inventories Requests | |
| In Inventories Requests, Dixi78 writes:
| Please make changes to the following inventory:
* Add 1 Part 32062 Red Technic, Axle 2 Notched (Extra)
* Change {2 to 1} Part Red 32062 Technic, Axle 2 Notched
Comments from Submitter:
Listed two, but need only one to build the set, so the other one is extra.
source: original instructions
|
The second axle is not used in the build according to the instructions but is
listed on the parts list and shown on the image for the set alongside the croissant.
An unusual scenario I agree but that's why its included
Thanks,
Paul.
|
|
Author: | BricksThatStick | Posted: | Jan 9, 2021 16:59 | Subject: | Re: Inventory Change Request for Set 21324-1 | Viewed: | 21 times | Topic: | Inventories Requests | |
| In Inventories Requests, triniatti writes:
| Please make changes to the following inventory:
* Add 1 Part 2431pb652 Medium Nougat Tile 1 x 4 with Wood Grain and 4 Silver Nails Pattern (Alternate)
* Add 1 Part 3070bpb180 Light Bluish Gray Tile 1 x 1 with Groove with White and Red Gauge and Thin Needle Pattern (Alternate)
* Add 1 Part 3005pb044 Medium Blue Brick 1 x 1 with Glass Pattern (Milk Carton)
|
These requests were based on TLG's data so not approved. I've found no
evidence of them in set reviews but if they eventually show in sealed sets then
a new request can be submitted and then of course approved.
|
|
Author: | Turez | Posted: | Jan 9, 2021 09:53 | Subject: | Re: Inventory Change Request for Set 10740-1 | Viewed: | 16 times | Topic: | Inventories Requests | |
| In Inventories Requests, Turez writes:
| Please make changes to the following inventory:
* Change 1 Part Light Bluish Gray {51858 Crane / Bucket Lift Basket 2 x 3 x 2 with Locking Hinge Fingers (Undetermined Hinge Type) to 51858b Crane / Bucket Lift Basket 2 x 3 x 2 with Locking Hinge Fingers, 7 Teeth}
Comments from Submitter:
Set unboxing and building at https://www.youtube.com/watch?v=uvy6OQv8e9o
|
https://youtu.be/uvy6OQv8e9o?t=169
|
|
|
Author: | Turez | Posted: | Jan 9, 2021 09:52 | Subject: | Inventory Change Request for Set 10740-1 | Viewed: | 26 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Light Bluish Gray {51858 Crane / Bucket Lift Basket 2 x 3 x 2 with Locking Hinge Fingers (Undetermined Hinge Type) to 51858b Crane / Bucket Lift Basket 2 x 3 x 2 with Locking Hinge Fingers, 7 Teeth}
Comments from Submitter:
Set unboxing and building at https://www.youtube.com/watch?v=uvy6OQv8e9o
|
Author: | VesaliaBricks | Posted: | Jan 9, 2021 03:00 | Subject: | Inventory Change Request for Set 71719-1 | Viewed: | 25 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Gear 6325698 (Not Applicable) Ninjago Skull Dungeons Game Board
Comments from Submitter:
Set also contains the Gear: Game board
|
|
Author: | BricksThatStick | Posted: | Jan 8, 2021 16:59 | Subject: | Re: Inventory Change Request for Set 5561-1 | Viewed: | 21 times | Topic: | Inventories Requests | |
| In Inventories Requests, primadeluxe writes:
| Please make changes to the following inventory:
* Add 2 Part 2362a White Panel 1 x 2 x 3 - Solid Studs (Alternate)
Comments from Submitter:
Orginal build set
|
I made them regular as the sticker over assemblies using these also confirm solid
stud:
* | | BA076pb01R Stickered Assembly 6 x 1 x 5 with Red Arrow Pattern Model Right Side (Sticker) - Set 5561 - 2 Brick 1 x 6, 1 Panel 1 x 2 x 3, 1 Window 1 x 4 x 3 Parts: Stickered Assembly |
* | | BA076pb01L Stickered Assembly 6 x 1 x 5 with Red Arrow Pattern Model Left Side (Sticker) - Set 5561 - 2 Brick 1 x 6, 1 Panel 1 x 2 x 3, 1 Window 1 x 4 x 3 Parts: Stickered Assembly |
Thanks,
Paul.
|
|
Author: | BricksThatStick | Posted: | Jan 8, 2021 16:05 | Subject: | Re: Inventory Change Request for Set 5526-1 | Viewed: | 27 times | Topic: | Inventories Requests | |
| In Inventories Requests, Suparsonik writes:
| In Inventories Requests, BricksThatStick writes:
| In Inventories Requests, Suparsonik writes:
| Please make changes to the following inventory:
* Add 2 Part 30162 Dark Gray Minifigure, Utensil Binoculars Town (Alternate) (match ID 1)
* Add 13 Part 4274 Light Gray Technic, Pin 1/2 (Alternate) (match ID 2)
Comments from Submitter:
After going through this set, I had these pieces unaccounted for (in the supposedly correct color), but had them in the older color schemes rather than the new grays they went with later on. I just wanted to add these pieces as alternates since they don't have any currently.
|
Please can you confirm the source of your set? Is it one you built from new?
If not how can you be certain these came with it originally?
Thanks,
Paul.
|
It's not from a completely "new" set, but one that I put back together from
the original set I bought when it came out after being mixed with some other
generic LEGO stuff. I'm fairly certain these came with this one as I put
together all of the sets again based on their inventories on this site and I
had those pieces but not in the correct color listed in the inventory for this
set. There's no other possible place they could've come from other than
this particular set, especially considering I have the exact numbers of both
parts but just not in the new bluish gray colors.
|
Thanks for the info. Unless we can be 100% sure these alternates are correct
from a sealed set then I'm reluctant to approve them.
The binoculars for example stop showing up in sets in (old) dark gray in 2003:
https://www.bricklink.com/catalogItemIn.asp?P=30162&colorID=10&in=A
The set in question above is 2 years later. It may be the case they found old
stock and used them up but without firm proof we are just making assumptions.
Many thanks for taking the time to submit the requests and if there's anything
else you spot in the future let us know.
Paul.
p.s. reply above applies to your other request as well
|
|
Author: | randyf | Posted: | Jan 8, 2021 14:20 | Subject: | Re: Inventory Change Request for Set 7240-1 | Viewed: | 11 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| Please make changes to the following inventory:
* Change 1 Part White {51858 Crane / Bucket Lift Basket 2 x 3 x 2 with Locking Hinge Fingers (Undetermined Hinge Type) to 51858a Crane / Bucket Lift Basket 2 x 3 x 2 with Locking Hinge Fingers, 9 Teeth}
Comments from Submitter:
From sealed set unboxing video at https://www.youtube.com/watch?v=n6WWfUEERYs
|
|
|
|
Author: | randyf | Posted: | Jan 8, 2021 14:19 | Subject: | Inventory Change Request for Set 7240-1 | Viewed: | 24 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part White {51858 Crane / Bucket Lift Basket 2 x 3 x 2 with Locking Hinge Fingers (Undetermined Hinge Type) to 51858a Crane / Bucket Lift Basket 2 x 3 x 2 with Locking Hinge Fingers, 9 Teeth}
Comments from Submitter:
From sealed set unboxing video at https://www.youtube.com/watch?v=n6WWfUEERYs
|
|
Author: | zaskar | Posted: | Jan 8, 2021 13:44 | Subject: | Inventory Change Request for Set 7743-1 | Viewed: | 17 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 4 Part 3245c White Brick 1 x 2 x 2 with Inside Stud Holder (Alternate) (match ID 9)
* Change 4 Part White 3245b Brick 1 x 2 x 2 with Inside Axle Holder {match ID 0 to 9}
Comments from Submitter:
Parted out two sets. One set came with part 3245c.
|
|
Author: | randyf | Posted: | Jan 8, 2021 13:37 | Subject: | Re: Inventory Change Request for Set 60212-1 | Viewed: | 10 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| Please make changes to the following inventory:
* Change 1 Part Light Bluish Gray {51858 Crane / Bucket Lift Basket 2 x 3 x 2 with Locking Hinge Fingers (Undetermined Hinge Type) to 51858b Crane / Bucket Lift Basket 2 x 3 x 2 with Locking Hinge Fingers, 7 Teeth}
Comments from Submitter:
Sealed set unboxing at https://www.youtube.com/watch?v=lK5tpBVmybk
|
|
|
|
Author: | randyf | Posted: | Jan 8, 2021 13:35 | Subject: | Inventory Change Request for Set 60212-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Light Bluish Gray {51858 Crane / Bucket Lift Basket 2 x 3 x 2 with Locking Hinge Fingers (Undetermined Hinge Type) to 51858b Crane / Bucket Lift Basket 2 x 3 x 2 with Locking Hinge Fingers, 7 Teeth}
Comments from Submitter:
Sealed set unboxing at https://www.youtube.com/watch?v=lK5tpBVmybk
|
Author: | Roxyncz | Posted: | Jan 8, 2021 12:05 | Subject: | Inventory Change Request for Set 70901-1 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 85984pb292 Black Slope 30 1 x 2 x 2/3 with Control Panel Pattern (Sticker) - Set 70901 (Counterpart)
|
Author: | Roxyncz | Posted: | Jan 8, 2021 12:03 | Subject: | Inventory Change Request for Set 70589-1 | Viewed: | 17 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 2335pb220 Black Flag 2 x 2 Square with Gold Ninjago Earth Emblem Pattern on Both Sides (Stickers) - Set 70589 (Counterpart)
|
|
Author: | Hygrotus | Posted: | Jan 8, 2021 10:35 | Subject: | Inventory Change Request for Set 30229-1 | Viewed: | 26 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Light Bluish Gray {51858 Crane / Bucket Lift Basket 2 x 3 x 2 with Locking Hinge Fingers (Undetermined Hinge Type) to 51858b Crane / Bucket Lift Basket 2 x 3 x 2 with Locking Hinge Fingers, 7 Teeth}
Comments from Submitter:
Checked in set from my personal collection which was MISB and not mixed with other parts.
I also verified this set's inventory previously.
|
|
Author: | Turez | Posted: | Jan 8, 2021 08:49 | Subject: | Re: Inventory Change Request for Set 60054-1 | Viewed: | 16 times | Topic: | Inventories Requests | |
| In Inventories Requests, Turez writes:
| Please make changes to the following inventory:
* Change 1 Part Light Bluish Gray {51858 Crane / Bucket Lift Basket 2 x 3 x 2 with Locking Hinge Fingers to 51858b Crane / Bucket Lift Basket 2 x 3 x 2 with Locking Hinge Fingers, 7 Teeth}
Comments from Submitter:
Set unboxing and building at https://brickshelf.com/cgi-bin/gallery.cgi?f=542001
|
|
|
|
Author: | Turez | Posted: | Jan 8, 2021 08:48 | Subject: | Inventory Change Request for Set 60054-1 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Light Bluish Gray {51858 Crane / Bucket Lift Basket 2 x 3 x 2 with Locking Hinge Fingers to 51858b Crane / Bucket Lift Basket 2 x 3 x 2 with Locking Hinge Fingers, 7 Teeth}
Comments from Submitter:
Set unboxing and building at https://brickshelf.com/cgi-bin/gallery.cgi?f=542001
|
|
Author: | Turez | Posted: | Jan 8, 2021 08:45 | Subject: | Inventory Change Request for Set 7239-1 | Viewed: | 14 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part White {51858 Crane / Bucket Lift Basket 2 x 3 x 2 with Locking Hinge Fingers to 51858a Crane / Bucket Lift Basket 2 x 3 x 2 with Locking Hinge Fingers, 9 Teeth}
Comments from Submitter:
Checked in set from my personal collection which was bought new and not mixed with other parts.
|
|
Author: | Turez | Posted: | Jan 8, 2021 08:45 | Subject: | Inventory Change Request for Set 7324-4 | Viewed: | 14 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part White {51858 Crane / Bucket Lift Basket 2 x 3 x 2 with Locking Hinge Fingers to 51858a Crane / Bucket Lift Basket 2 x 3 x 2 with Locking Hinge Fingers, 9 Teeth}
Comments from Submitter:
Checked in set from my personal collection which was bought new and not mixed with other parts.
|
|
Author: | Turez | Posted: | Jan 8, 2021 08:43 | Subject: | Inventory Change Request for Set 3179-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 51858b White Crane / Bucket Lift Basket 2 x 3 x 2 with Locking Hinge Fingers, 7 Teeth (Alternate) (match ID 6)
* Change 1 Part White 51858a Crane / Bucket Lift Basket 2 x 3 x 2 with Locking Hinge Fingers, 9 Teeth {match ID 0 to 6}
Comments from Submitter:
Checked in set from my personal collection (batch code 48S0) which was bought new and not mixed with other parts.
|
|
Author: | SylvainLS | Posted: | Jan 8, 2021 08:22 | Subject: | Re: Inventory Change Request for Set 6374-1 | Viewed: | 27 times | Topic: | Inventories Requests | |
| In Inventories Requests, SezaR writes:
| […]
| In that case there must be either an uncatalogued variant or a version with a
misprinted instruction. On my copy of the instructions, there is a blue 2 x 2
and the letter tile is either on top of a white 2 x 2 or the white plate from
the previous layer, the instructions are unclear
|
Interesting!
This is a misprint and was corrected in later copies. This is common.
|
Yeah, those were made/painted by hand. Easy to miss the little bit to paint
in blue
|
|
Author: | SezaR | Posted: | Jan 8, 2021 08:05 | Subject: | Re: Inventory Change Request for Set 6374-1 | Viewed: | 26 times | Topic: | Inventories Requests | |
| In Inventories Requests, Tootsiesclaw writes:
| In Inventories Requests, SylvainLS writes:
| In Inventories Requests, Tootsiesclaw writes:
| Please make changes to the following inventory:
* Change 1 Part Blue {3001old Brick 2 x 4 without Cross Supports to 3003old Brick 2 x 2 without Inside Supports}
Comments from Submitter:
The instruction booklet for the set, at Step 10 of the main model, calls for a 2x2 Brick in blue which is not listed in the set inventory. No 2x4 Brick is used in the set's instructions
|
No, look again, it’s a 2x4 with a 1x2 letter tile on top.
|
In that case there must be either an uncatalogued variant or a version with a
misprinted instruction. On my copy of the instructions, there is a blue 2 x 2
and the letter tile is either on top of a white 2 x 2 or the white plate from
the previous layer, the instructions are unclear
|
Interesting!
This is a misprint and was corrected in later copies. This is common.
|
|
Author: | Tootsiesclaw | Posted: | Jan 8, 2021 07:35 | Subject: | Re: Inventory Change Request for Set 6374-1 | Viewed: | 30 times | Topic: | Inventories Requests | |
| In Inventories Requests, SylvainLS writes:
| In Inventories Requests, Tootsiesclaw writes:
| Please make changes to the following inventory:
* Change 1 Part Blue {3001old Brick 2 x 4 without Cross Supports to 3003old Brick 2 x 2 without Inside Supports}
Comments from Submitter:
The instruction booklet for the set, at Step 10 of the main model, calls for a 2x2 Brick in blue which is not listed in the set inventory. No 2x4 Brick is used in the set's instructions
|
No, look again, it’s a 2x4 with a 1x2 letter tile on top.
|
In that case there must be either an uncatalogued variant or a version with a
misprinted instruction. On my copy of the instructions, there is a blue 2 x 2
and the letter tile is either on top of a white 2 x 2 or the white plate from
the previous layer, the instructions are unclear
|
|
|
Author: | paulvdb | Posted: | Jan 8, 2021 05:01 | Subject: | Inventory Change Request for Set 60141-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Light Bluish Gray {51858 Crane / Bucket Lift Basket 2 x 3 x 2 with Locking Hinge Fingers to 51858b Crane / Bucket Lift Basket 2 x 3 x 2 with Locking Hinge Fingers, 7 Teeth}
* Change 2 Part Black {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (Undetermined Type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}
Comments from Submitter:
Source: set in my personal collection that was bought new sealed and never mixed with parts from other sets.
|
|
Author: | paulvdb | Posted: | Jan 8, 2021 04:54 | Subject: | Inventory Change Request for Set 60111-1 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Light Bluish Gray {51858 Crane / Bucket Lift Basket 2 x 3 x 2 with Locking Hinge Fingers to 51858b Crane / Bucket Lift Basket 2 x 3 x 2 with Locking Hinge Fingers, 7 Teeth}
* Change 7 Part Light Bluish Gray {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (Undetermined Type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}
Comments from Submitter:
Source: set in my personal collection that was bought new sealed and never mixed with parts from other sets.
|
|
Author: | paulvdb | Posted: | Jan 8, 2021 04:51 | Subject: | Inventory Change Request for Set 60110-1 | Viewed: | 16 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Light Bluish Gray {51858 Crane / Bucket Lift Basket 2 x 3 x 2 with Locking Hinge Fingers to 51858b Crane / Bucket Lift Basket 2 x 3 x 2 with Locking Hinge Fingers, 7 Teeth}
* Change 2 Part Dark Bluish Gray {44567 Hinge Plate 1 x 2 Locking with 1 Finger on Side (Undetermined Type) to 44567b Hinge Plate 1 x 2 Locking with 1 Finger on Side without Bottom Groove}
* Change 4 Part White {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (Undetermined Type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}
* Change 2 Part Red {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (Undetermined Type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}
Comments from Submitter:
Source: set in my personal collection that was bought new sealed and never mixed with parts from other sets.
|
|
Author: | paulvdb | Posted: | Jan 8, 2021 04:35 | Subject: | Inventory Change Request for Set 3179-1 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part White {51858 Crane / Bucket Lift Basket 2 x 3 x 2 with Locking Hinge Fingers to 51858a Crane / Bucket Lift Basket 2 x 3 x 2 with Locking Hinge Fingers, 9 Teeth}
Comments from Submitter:
Source: set in my personal collection that was bought new sealed and never mixed with parts from other sets.
|
|
Author: | paulvdb | Posted: | Jan 8, 2021 04:34 | Subject: | Inventory Change Request for Set 7207-1 | Viewed: | 14 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part White {51858 Crane / Bucket Lift Basket 2 x 3 x 2 with Locking Hinge Fingers to 51858a Crane / Bucket Lift Basket 2 x 3 x 2 with Locking Hinge Fingers, 9 Teeth}
* Change 6 Part Dark Bluish Gray {4623 Plate, Modified 1 x 2 with Bar Arm Up (Undetermined Horizontal Arm Length) to 4623a Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 6mm)}
* Change 2 Part Dark Bluish Gray {3794 Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Bottom Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
Source: set in my personal collection that was bought new sealed and never mixed with parts from other sets.
|
|
Author: | paulvdb | Posted: | Jan 8, 2021 04:27 | Subject: | Inventory Change Request for Set 7945-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part White {51858 Crane / Bucket Lift Basket 2 x 3 x 2 with Locking Hinge Fingers to 51858a Crane / Bucket Lift Basket 2 x 3 x 2 with Locking Hinge Fingers, 9 Teeth}
Comments from Submitter:
Source: set in my personal collection that was bought new sealed and never mixed with parts from other sets.
|
|
Author: | SylvainLS | Posted: | Jan 7, 2021 20:28 | Subject: | Re: Inventory Change Request for Set 6374-1 | Viewed: | 19 times | Topic: | Inventories Requests | |
| In Inventories Requests, Tootsiesclaw writes:
| Please make changes to the following inventory:
* Change 1 Part Blue {3001old Brick 2 x 4 without Cross Supports to 3003old Brick 2 x 2 without Inside Supports}
Comments from Submitter:
The instruction booklet for the set, at Step 10 of the main model, calls for a 2x2 Brick in blue which is not listed in the set inventory. No 2x4 Brick is used in the set's instructions
|
No, look again, it’s a 2x4 with a 1x2 letter tile on top.
|
|
|
Author: | SezaR | Posted: | Jan 7, 2021 20:25 | Subject: | Re: Inventory Change Request for Set 6374-1 | Viewed: | 25 times | Topic: | Inventories Requests | |
| In Inventories Requests, Tootsiesclaw writes:
| Please make changes to the following inventory:
* Change 1 Part Blue {3001old Brick 2 x 4 without Cross Supports to 3003old Brick 2 x 2 without Inside Supports}
Comments from Submitter:
The instruction booklet for the set, at Step 10 of the main model, calls for a 2x2 Brick in blue which is not listed in the set inventory. No 2x4 Brick is used in the set's instructions
|
Thanks but that is incorrect.
On the step 10, one blue
is used an on top left of it, one
[p=3069bp01]
is applied.
|
|
Author: | Tootsiesclaw | Posted: | Jan 7, 2021 19:23 | Subject: | Inventory Change Request for Set 6374-1 | Viewed: | 27 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Blue {3001old Brick 2 x 4 without Cross Supports to 3003old Brick 2 x 2 without Inside Supports}
Comments from Submitter:
The instruction booklet for the set, at Step 10 of the main model, calls for a 2x2 Brick in blue which is not listed in the set inventory. No 2x4 Brick is used in the set's instructions
|
|
Author: | SezaR | Posted: | Jan 7, 2021 18:56 | Subject: | Inventory Change Request for Set 18-1 | Viewed: | 49 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 3778 Green Plant, Tree Cypress (Alternate) (match ID 99)
* Change 1 Part Green 3778 Plant, Tree Cypress {match ID 0 to 99}
* Change 2 Part White 739p01 Road Sign Octagon with Stop Sign Pattern {match ID 0 to 99}
* Change 2 Part White 80039 Road Sign Round with Left Turn Prohibited Pattern {match ID 0 to 99}
* Change 2 Part White 647pb01 Road Sign Square with Parking Pattern {match ID 0 to 99}
|
|
Author: | BricksThatStick | Posted: | Jan 7, 2021 16:53 | Subject: | Re: Inventory Change Request for Set 305-2 | Viewed: | 23 times | Topic: | Inventories Requests | |
| In Inventories Requests, bje writes:
| Please make changes to the following inventory:
* Delete 4 Part 3004 Red Brick 1 x 2
* Add 1 Part 3004 Red Brick 1 x 2
* Add 1 Part 3007 Red Brick 2 x 8
* Delete 14 Part 3003old Red Brick 2 x 2 without Inside Supports
* Add 13 Part 3003old Red Brick 2 x 2 without Inside Supports
* Delete 23 Part 3002old Red Brick 2 x 3 without Cross Supports
* Add 22 Part 3002old Red Brick 2 x 3 without Cross Supports
* Add 2 Part 3001old Red Brick 2 x 4 without Cross Supports
* Add 1 Part 3039 Red Slope 45 2 x 2
* Delete 6 Part 3038 Red Slope 45 2 x 3
* Add 4 Part 3038 Red Slope 45 2 x 3
* Add 1 Part 3037 Red Slope 45 2 x 4
Comments from Submitter:
Confirmed to actual build with instructions in hand. . Set not sealed. Images of build process and detailed scans of instructions can be provided.
|
Yes I'm curious to see detailed scans of the instructions - the existing
inventory was based on instructions but we don't know whether it was instructions
that were to hand or the poor ones available online - will PM you now.
|
|
Author: | BricksThatStick | Posted: | Jan 7, 2021 16:40 | Subject: | Re: Inventory Change Request for Set 9699-1 | Viewed: | 22 times | Topic: | Inventories Requests | |
| In Inventories Requests, SeriousBricks writes:
| Please make changes to the following inventory:
* Add 1 Part 60797c01 Red Door 1 x 4 x 6 with 3 Panes and Stud Handle with Trans-Light Blue Glass
Comments from Submitter:
This is the original door, 1 per set. The other door Item No x39
|
Thanks for this change request - can you confirm your source for this change?
Do you have the original set?
I'm only checking as the door you are requesting to change it to is a different
design altogether - with the handle built into the glass rather than the frame:
[p=60797c01]
* | | x39c01 Door 1 x 4 x 6 with 3 Panes and Square Handle with Fixed Trans-Light Blue Glass Parts: Door |
Thanks,
Paul.
|
|
Author: | Brickitty | Posted: | Jan 7, 2021 13:50 | Subject: | Inventory Change Request for Set 3544-1 | Viewed: | 28 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 44790pb07 Black Hockey Helmet with NHL Logo Both Sides, White Number 7 and White Stripe Pattern (Stickers) - Set 3544 (Counterpart)
* Add 1 Part 44790pb08 White Hockey Helmet with NHL Logo Both Sides, Black Number 5 and Orange Stripe Pattern (Stickers) - Set 3544 (Counterpart)
|
|
Author: | SezaR | Posted: | Jan 7, 2021 07:56 | Subject: | Inventory Change Request for Set 554-1 | Viewed: | 28 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part BA245pb01R Red Stickered Assembly 6 x 2 x 1 with 'Happy Motoring !' Pattern Model Right Side (Sticker) - Set 554 - 1 Slope 45 2 x 2, 1 Slope 45 2 x 4 (Counterpart)
* Add 1 Part BA245pb01L Red Stickered Assembly 6 x 2 x 1 with 'Happy Motoring !' Pattern Model Left Side (Sticker) - Set 554 - 1 Slope 45 2 x 2, 1 Slope 45 2 x 4 (Counterpart)
|
|
Author: | SezaR | Posted: | Jan 7, 2021 07:54 | Subject: | Inventory Change Request for Set 6602-1 | Viewed: | 16 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part BA246pb01 Red Stickered Assembly 7 x 4 x 1 with 'FIRE CHIEF' and Classic Fire Logo Pattern on Both Sides (Stickers) - Set 602-1 - 1 Plate 2 x 3, 2 Plate 2 x 6, 2 Vehicle, Mudguard 2 x 4 with Arch Smooth (Counterpart)
|
Author: | SezaR | Posted: | Jan 7, 2021 07:53 | Subject: | Inventory Change Request for Set 602-1 | Viewed: | 16 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part BA246pb01 Red Stickered Assembly 7 x 4 x 1 with 'FIRE CHIEF' and Classic Fire Logo Pattern on Both Sides (Stickers) - Set 602-1 - 1 Plate 2 x 3, 2 Plate 2 x 6, 2 Vehicle, Mudguard 2 x 4 with Arch Smooth (Counterpart)
|
Author: | SezaR | Posted: | Jan 7, 2021 07:52 | Subject: | Inventory Change Request for Set 7816-1 | Viewed: | 16 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part BA247pb01 White Stickered Assembly 11 x 6 x 2 with Red 'Shell' and Shell Logo Pattern on Both Sides (Stickers) - Set 7816 - 6 Brick 1 x 2, 4 Brick 1 x 3, 2 Brick 1 x 4, 4 Brick 1 x 6 (Counterpart)
|
|
Author: | platinum_lego | Posted: | Jan 7, 2021 04:25 | Subject: | Inventory Change Request for Set 41351-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 14769pb365 Light Aqua Tile, Round 2 x 2 with Bottom Stud Holder with Cushion, Dark Pink Chevrons and Black Button Pattern (Sticker) - Set 41351 (Counterpart)
* Add 1 Part 6179pb193 White Tile, Modified 4 x 4 with Studs on Edge with Dark Purple and Light Aqua Go-Kart, Driver, Writing Scribble and Heart Pattern (Sticker) - Set 41351 (Counterpart)
|
|
Author: | SezaR | Posted: | Jan 6, 2021 19:59 | Subject: | Re: Inventory Change Request for Set 715-1 | Viewed: | 12 times | Topic: | Inventories Requests | |
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Add 8 Part 4073 Light Gray Plate, Round 1 x 1 (Alternate) (match ID 1)
* Add 1 Part 4073 Light Gray Plate, Round 1 x 1 (Extra)
* Add 2 Part 4073 Trans-Clear Plate, Round 1 x 1 (Alternate) (match ID 2)
* Add 1 Part 4073 Trans-Clear Plate, Round 1 x 1 (Extra)
* Add 4 Part 4073 Trans-Red Plate, Round 1 x 1 (Alternate) (match ID 3)
* Add 1 Part 4073 Trans-Red Plate, Round 1 x 1 (Extra)
* Add 8 Part 4073 Trans-Yellow Plate, Round 1 x 1 (Alternate) (match ID 4)
* Add 1 Part 4073 Trans-Yellow Plate, Round 1 x 1 (Extra)
* Add 4 Part 4073 Yellow Plate, Round 1 x 1 (Alternate) (match ID 5)
* Add 1 Part 4073 Yellow Plate, Round 1 x 1 (Extra)
* Add 4 Part 4265b Light Gray Technic, Bush 1/2 Toothed, Two Interior Ridges (Alternate) (match ID 6)
* Add 1 Part 4265b Light Gray Technic, Bush 1/2 Toothed, Two Interior Ridges (Extra)
* Change 4 Part Light Gray 4073c01 Plate, Round 1 x 1, 2 on Sprue {match ID 0 to 1}
* Change 1 Part Trans-Clear 4073c01 Plate, Round 1 x 1, 2 on Sprue {match ID 0 to 2}
* Change 2 Part Trans-Red 4073c01 Plate, Round 1 x 1, 2 on Sprue {match ID 0 to 3}
* Change 4 Part Trans-Yellow 4073c01 Plate, Round 1 x 1, 2 on Sprue {match ID 0 to 4}
* Change 2 Part Yellow 4073c01 Plate, Round 1 x 1, 2 on Sprue {match ID 0 to 5}
* Change 4 Part Light Gray 4265a Technic, Bush 1/2 Toothed, Four Interior Ridges {match ID 0 to 6}
Comments from Submitter:
The catalog
from 1994 found in the box.
|
|
|
|
Author: | SezaR | Posted: | Jan 6, 2021 19:53 | Subject: | Inventory Change Request for Set 715-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 8 Part 4073 Light Gray Plate, Round 1 x 1 (Alternate) (match ID 1)
* Add 1 Part 4073 Light Gray Plate, Round 1 x 1 (Extra)
* Add 2 Part 4073 Trans-Clear Plate, Round 1 x 1 (Alternate) (match ID 2)
* Add 1 Part 4073 Trans-Clear Plate, Round 1 x 1 (Extra)
* Add 4 Part 4073 Trans-Red Plate, Round 1 x 1 (Alternate) (match ID 3)
* Add 1 Part 4073 Trans-Red Plate, Round 1 x 1 (Extra)
* Add 8 Part 4073 Trans-Yellow Plate, Round 1 x 1 (Alternate) (match ID 4)
* Add 1 Part 4073 Trans-Yellow Plate, Round 1 x 1 (Extra)
* Add 4 Part 4073 Yellow Plate, Round 1 x 1 (Alternate) (match ID 5)
* Add 1 Part 4073 Yellow Plate, Round 1 x 1 (Extra)
* Add 4 Part 4265b Light Gray Technic, Bush 1/2 Toothed, Two Interior Ridges (Alternate) (match ID 6)
* Add 1 Part 4265b Light Gray Technic, Bush 1/2 Toothed, Two Interior Ridges (Extra)
* Change 4 Part Light Gray 4073c01 Plate, Round 1 x 1, 2 on Sprue {match ID 0 to 1}
* Change 1 Part Trans-Clear 4073c01 Plate, Round 1 x 1, 2 on Sprue {match ID 0 to 2}
* Change 2 Part Trans-Red 4073c01 Plate, Round 1 x 1, 2 on Sprue {match ID 0 to 3}
* Change 4 Part Trans-Yellow 4073c01 Plate, Round 1 x 1, 2 on Sprue {match ID 0 to 4}
* Change 2 Part Yellow 4073c01 Plate, Round 1 x 1, 2 on Sprue {match ID 0 to 5}
* Change 4 Part Light Gray 4265a Technic, Bush 1/2 Toothed, Four Interior Ridges {match ID 0 to 6}
Comments from Submitter:
The catalog
from 1994 found in the box.
|
|
Author: | jennnifer | Posted: | Jan 6, 2021 18:54 | Subject: | Inventory Change Request for Set 71374-1 | Viewed: | 27 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Light Bluish Gray {30552 Hinge Cylinder 1 x 2 Locking with 1 Finger and Axle Hole on Ends with Slots to 53923 Hinge Cylinder 1 x 2 Locking with 1 Finger and Axle Hole on Ends without Slots}
Comments from Submitter:
Sealed set contents. Variant not yet in the catalog when set inventory was submitted.
|
|
Author: | normann1974 | Posted: | Jan 6, 2021 18:47 | Subject: | Re: Inventory Change Request for Set 375-2 | Viewed: | 23 times | Topic: | Inventories Requests | |
| | This is rather strange. Judging by the names of the parts, the purple version
could belong to the European version of the set, so could the blue versions belong
exclusively to the US version (set 6075)?
|
No, that can't be right. I just checked my own set 375, and it has blue stickers.
It was bought used, but it's not likely that the stickers came from a US
set.
/Jan
|
|
Author: | randyf | Posted: | Jan 6, 2021 18:46 | Subject: | Re: Inventory Change Request for Set 60265-1 | Viewed: | 22 times | Topic: | Inventories Requests | |
| In Inventories Requests, jennnifer writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, Turez writes:
| I have checked all 2020 sets with
* | | 30552 Hinge Cylinder 1 x 2 Locking with 1 Finger and Axle Hole on Ends with Slots Parts: Hinge | on Youtube and the old variant with slots is correct for all of them
but
|
My oldest son has this set and it is on display in his room. I went check it,
and it has the new variant.
So that only leaves the Nintendo set to check.
Thanks for your help, Jonas.
Cheers,
Randy
|
Did you say Nintendo??
My set has 53923, no slots. Would you like me to submit a request?
Jen
|
Yes, please! Woohoo! Thanks, Jen!
|
|
Author: | normann1974 | Posted: | Jan 6, 2021 18:44 | Subject: | Re: Inventory Change Request for Set 375-2 | Viewed: | 23 times | Topic: | Inventories Requests | |
| In Inventories Requests, the_legoqueen writes:
| Please make changes to the following inventory:
* Delete 2 Part 3846pb11eu Light Gray Minifigure, Shield Triangular with Three Yellow Cloves on Purple Background Pattern (Sticker) - Set 375-2 (Counterpart)
Comments from Submitter:
Look at the sticker sheet and the instructions and photos for this set. There is only ONE set of stickers with the 3 yellow cloves. The cloves are on a BLUE background item #280150 which is already included. I believe someone has a faded blue sticker that may look more purple than blue, but it must be the blue sticker faded. This item (purple) needs to be deleted. The part number "3846pb11eu" should be merged into the correct one 3846pb11.
|
This is rather strange. Judging by the names of the parts, the purple version
could belong to the European version of the set, so could the blue versions belong
exclusively to the US version (set 6075)?
I wonder why there are two different parts for the sticker sheets, but the primary
image for them are in fact the same image.
/Jan
|
|
Author: | jennnifer | Posted: | Jan 6, 2021 18:41 | Subject: | Re: Inventory Change Request for Set 60265-1 | Viewed: | 15 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| In Inventories Requests, Turez writes:
| I have checked all 2020 sets with
* | | 30552 Hinge Cylinder 1 x 2 Locking with 1 Finger and Axle Hole on Ends with Slots Parts: Hinge | on Youtube and the old variant with slots is correct for all of them
but
|
My oldest son has this set and it is on display in his room. I went check it,
and it has the new variant.
So that only leaves the Nintendo set to check.
Thanks for your help, Jonas.
Cheers,
Randy
|
Did you say Nintendo??
My set has 53923, no slots. Would you like me to submit a request?
Jen
|
|
Author: | randyf | Posted: | Jan 6, 2021 18:38 | Subject: | Inventory Change Request for Set 21322-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 4 Part Black {30552 Hinge Cylinder 1 x 2 Locking with 1 Finger and Axle Hole on Ends with Slots to 53923 Hinge Cylinder 1 x 2 Locking with 1 Finger and Axle Hole on Ends without Slots}
Comments from Submitter:
From my oldest son's sealed set that was built once and put on display in his room.
|
|
Author: | randyf | Posted: | Jan 6, 2021 18:36 | Subject: | Re: Inventory Change Request for Set 60265-1 | Viewed: | 22 times | Topic: | Inventories Requests | |
| In Inventories Requests, Turez writes:
| I have checked all 2020 sets with
* | | 30552 Hinge Cylinder 1 x 2 Locking with 1 Finger and Axle Hole on Ends with Slots Parts: Hinge | on Youtube and the old variant with slots is correct for all of them
but
|
My oldest son has this set and it is on display in his room. I went check it,
and it has the new variant.
So that only leaves the Nintendo set to check.
Thanks for your help, Jonas.
Cheers,
Randy
|
|
Author: | 1977_mauro | Posted: | Jan 6, 2021 12:30 | Subject: | Inventory Change Request for Set 79008-1 | Viewed: | 28 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 23 Part Reddish Brown {3794 Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Bottom Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)} (Alternate) {match ID 2 to 2}
Comments from Submitter:
Parted out 3 sealed sets. In one of them there were 8 x 3794a in reddish brown (other 15 were 3794b)
|
|
Author: | SezaR | Posted: | Jan 6, 2021 07:37 | Subject: | Inventory Change Request for Set 4535-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part 70928 Black Electric, Train Speed Regulator 9V Power Adapter 230V (Continental European type) (Alternate) (match ID 1)
* Delete 1 Part 70930 Black Electric, Train Speed Regulator 9V Power Adapter 240V (Australia) (Alternate) (match ID 1)
* Delete 1 Part 70928b Black Electric, Train Speed Regulator 9V Power Adapter 240V (UK) (Alternate) (match ID 1)
* Change 1 Part Black 70931 Electric, Train Speed Regulator 9V (12 VAC) Power Adapter 120V 60Hz {match ID 1 to 0}
Comments from Submitter:
Thanks to the comment of Jonas here,
https://www.bricklink.com/message.asp?ID=1242234
we did more research. It turns out that this set was only sold outside USA on the website of Lego.com and it came mostly likey with USA adaptor. It is true that TLG is very accurate with such things and would not make the mistake of selling a train to Europe or Australia/New-Zealand with a US adaptor but for now, there is no evidence of this.
|
|
Author: | SezaR | Posted: | Jan 6, 2021 07:36 | Subject: | Inventory Change Request for Set 4534-1 | Viewed: | 17 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part 70928 Black Electric, Train Speed Regulator 9V Power Adapter 230V (Continental European type) (Alternate) (match ID 1)
* Delete 1 Part 70930 Black Electric, Train Speed Regulator 9V Power Adapter 240V (Australia) (Alternate) (match ID 1)
* Delete 1 Part 70928b Black Electric, Train Speed Regulator 9V Power Adapter 240V (UK) (Alternate) (match ID 1)
* Change 1 Part Black 70931 Electric, Train Speed Regulator 9V (12 VAC) Power Adapter 120V 60Hz {match ID 1 to 0}
Comments from Submitter:
Thanks to the comment of Jonas here,
https://www.bricklink.com/message.asp?ID=1242234
we did more research. It turns out that this set was only sold outside USA on the website of Lego.com and it came mostly likey with USA adaptor. It is true that TLG is very accurate with such things and would not make the mistake of selling a train to Europe or Australia/New-Zealand with a US adaptor but for now, there is no evidence of this.
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|