Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | Shintaku  | | Posted: | Jun 28, 2020 13:46 | | Subject: | NPBs and NSSs proportional to feedback rating | | Viewed: | 103 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Hello,
I'm here since 10 years and I really find it wrong that a newcomer has 3
NPB as much as someone who is here since years.
I'll explain you why.
I really believe that a newcomer with 0 to 9 feedbacks shouldn't be allowed
to have more than 1 NPB chance. If you miss that, you're out.
As a seller, I have been targeted too much with newcomers that realize they don't
want to buy after the order was placed. This means my bricks are blocked for
7 to 21 days.
If I do cancel the order, the buyer can give me a negative, so I have to undergo
the NPB procedure in order to prevent the seller from giving nasty feedbacks.
My suggestion follows like this:
0-9 feedbacks rating : 1 NPB / NSS
10-99 2 NPB / NSS
100-999 3 NPB / NSS
1000-9999 4 NPB / NSS
10k+ 5 NPB / NSS
I believe that sellers may be targeted with NSS for facticious reasons, like
"1 piece wasn't in the package, I start a NSS" from a 0 fb rookie who still
doesn't know how BL works. Sometimes BL takes a lot of time to reply and
this lead in the past in the closing of many shops for a third NSS which wasn't
actually real. Giving a 4th or 5th NSS chance it's just a compensation for
possible "fake NSSs".
I'd personally prevent 0-9 feedback rating users from leaving negative feedbacks
too. But that's another story.
|
 |
| Author: | Shintaku | | Posted: | Jun 28, 2020 04:42 | | Subject: | NPBs and NSSs proportional to feedback rating | | Viewed: | 129 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Hello,
I'm here since 10 years and I really find it wrong that a newcomer has 3
NPB as much as someone who is here since years.
I'll explain you why.
I really believe that a newcomer with 0 to 9 feedbacks shouldn't be allowed
to have more than 1 NPB chance. If you miss that, you're out.
As a seller, I have been targeted too much with newcomers that realize they don't
want to buy after the order was placed. This means my bricks are blocked for
7 to 21 days.
If I do cancel the order, the buyer can give me a negative, so I have to undergo
the NPB procedure in order to prevent the seller from giving nasty feedbacks.
My suggestion follows like this:
0-9 feedbacks rating : 1 NPB / NSS
10-99 2 NPB / NSS
100-999 3 NPB / NSS
1000-9999 4 NPB / NSS
10k+ 5 NPB / NSS
I believe that sellers may be targeted with NSS for facticious reasons, like
"1 piece wasn't in the package, I start a NSS" from a 0 fb rookie who still
doesn't know how BL works. Sometimes BL takes a lot of time to reply and
this lead in the past in the closing of many shops for a third NSS which wasn't
actually real. Giving a 4th or 5th NSS chance it's just a compensation for
possible "fake NSSs".
I'd personally prevent 0-9 feedback rating users from leaving negative feedbacks
too. But that's another story.
|
|
| Author: | Roxyncz | | Posted: | Jun 28, 2020 04:26 | | Subject: | Inventory Change Request for Set 60213-1 | | Viewed: | 18 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 28533c01pb01 Red Boat, Hull Unitary 16 x 8 Base with Dark Bluish Gray Top with '60213' and Fire Logo Badge Pattern on Both Sides (Stickers) - Set 60213 (Counterpart)
* Add 1 Part 892pb035 Light Bluish Gray Road Sign 2 x 2 Triangle with Clip with Car Falling into Water Pattern (Sticker) - Set 60213 (Counterpart)
|
|
| Author: | primadeluxe | | Posted: | Jun 28, 2020 04:25 | | Subject: | Number bricks: which is which | | Viewed: | 169 times | | Topic: | Catalog | | Status: | Open | |
|
| Can someone help me identify these number bricks, because in de catalog there
are three different entries, I have three different bricks, but they do not look
the same. And they have two different logo on the stud. See attached pictures.
Thanks!
|
|
| Author: | krazy_yvan | | Posted: | Jun 28, 2020 02:47 | | Subject: | Inventory Change Request for Set 75190-1 | | Viewed: | 22 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 6179pb178 Black Tile, Modified 4 x 4 with Studs on Edge with Red Angled Stripes Pattern (Sticker) - Set 75190 (Counterpart)
|
|
| Author: | krazy_yvan | | Posted: | Jun 28, 2020 02:46 | | Subject: | Inventory Change Request for Set 75212-1 | | Viewed: | 19 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 6 Part 2958pb080 Light Bluish Gray Technic, Disk 3 x 3 with SW Millennium Falcon Grille and White Outline Pattern (Sticker) - Set 75212 (Counterpart)
* Add 1 Part 3039pb134 Black Slope 45 2 x 2 with SW Millennium Falcon Control Panel, Yellow and White Buttons Pattern (Sticker) - Set 75212 (Counterpart)
* Add 2 Part 14769pb326 Light Bluish Gray Tile, Round 2 x 2 with Bottom Stud Holder with Dark Bluish Gray Fan on White Background Pattern (Sticker) - Set 75212 (Counterpart)
* Add 1 Part 3037pb058 Black Slope 45 2 x 4 with SW Millennium Falcon Control Panel, Bright Light Orange and Gray Buttons Pattern (Sticker) - Set 75212 (Counterpart)
* Add 1 Part 33909pb006 Yellow Tile, Modified 2 x 2 with Studs on Edge with SW Millennium Falcon Control Panel and Buttons Pattern (Sticker) - Set 75212 (Counterpart)
* Add 1 Part 14769pb327 Light Bluish Gray Tile, Round 2 x 2 with Bottom Stud Holder with SW Millennium Falcon Light Bluish Gray Pipes Pattern (Sticker) - Set 75212 (Counterpart)
* Add 1 Part 85984pb263 Black Slope 30 1 x 2 x 2/3 with SW Millennium Falcon Control Panel, White and Yellow Buttons and Speaker Pattern (Sticker) - Set 75212 (Counterpart)
* Add 1 Part 14769pb325 Light Bluish Gray Tile, Round 2 x 2 with Bottom Stud Holder with SW Millennium Falcon Dark Bluish Gray and White Circles Pattern (Sticker) - Set 75212 (Counterpart)
* Add 2 Part 3069bpb798 Light Bluish Gray Tile 1 x 2 with Groove with Bright Light Orange and White Danger Stripes and Aurebesh Characters 'CARGO' Pattern (Sticker) - Set 75212 (Counterpart)
* Add 1 Part 14769pb324 Light Bluish Gray Tile, Round 2 x 2 with Bottom Stud Holder with SW Millennium Falcon Dark Bluish Gray and White Circles and Cross Pattern (Sticker) - Set 75212 (Counterpart)
* Add 1 Part 6179pb179 Black Tile, Modified 4 x 4 with Studs on Edge with SW Millennium Falcon Control Panel, Bright Light Orange and White Buttons Pattern (Sticker) - Set 75212 (Counterpart)
|
|
| Author: | krazy_yvan | | Posted: | Jun 28, 2020 02:39 | | Subject: | Inventory Change Request for Set 75155-1 | | Viewed: | 14 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 13252pb02 Trans-Clear Windscreen 12 x 6 x 2 with Locking Dual 2 Fingers Hinge with SW Dark Bluish Gray, Dark Blue and White Stripes Pattern (Stickers) - Set 75155 (Counterpart)
|
|
| Author: | Brixalotl | | Posted: | Jun 27, 2020 20:55 | | Subject: | Inventory Change Request for Set 75215-1 | | Viewed: | 21 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 6 Part 44302b Dark Bluish Gray Hinge Plate 1 x 2 Locking with 2 Fingers on End and 9 Teeth without Bottom Groove (Alternate) (match ID 1)
* Change 6 Part Dark Bluish Gray 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End and 9 Teeth with Bottom Groove {match ID 0 to 1}
Comments from Submitter:
found both versions during part out, thanks
|
|
| Author: | SezaR | | Posted: | Jun 27, 2020 16:50 | | Subject: | Inventory Change Request for Set 7727-1 | | Viewed: | 23 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 16 Part 3048 Black Slope 45 2 x 1 Triple (Undetermined Underside Type)
* Add 16 Part 3048a Black Slope 45 2 x 1 Triple without Inside Bar or Bottom Stud Holder
Comments from Submitter:
I have multiple copies of this set. One of my copies is in mint condition with new sticker sheet. Looks like it was built only once.
All my copies come with 3048a.
|
|
| Author: | Bethfish | | Posted: | Jun 27, 2020 16:42 | | Subject: | Inventory Change Request for Set 2519-1 | | Viewed: | 41 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change {8 to 6} Part Black 2780 Technic, Pin with Friction Ridges Lengthwise with Center Slots
* Change {13 to 12} Part Blue 4274 Technic, Pin 1/2
* Change {2 to 1} Part Red 3713 Technic, Bush
Comments from Submitter:
I’m not sure I filled this out correctly. 433789 says 8 but book inventory is 6. Could also add one to extras. 433786 says 13 but book says 12. 1 should be under extras. 433783 says 2 but book says 1. 1 should be assed to extras.
|
|
| Author: | mgibarian | | Posted: | Jun 27, 2020 13:42 | | Subject: | Inventory Change Request for Set 75979-1 | | Viewed: | 21 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 87079pb721 Black Tile 2 x 4 with 'Hedwig' Pattern (Sticker) - Set 75979 (Counterpart)
* Add 1 Part 87079pb722R Tan Tile 2 x 4 with Envelope and Spots Pattern Model Right Side (Sticker) - Set 75979 (Counterpart)
* Add 1 Part 14769pb323 Red Tile, Round 2 x 2 with Bottom Stud Holder with Envelope Seal and Hogwarts Emblem Pattern (Sticker) - Set 75979 (Counterpart)
* Add 1 Part 87079pb722L Tan Tile 2 x 4 with Envelope and Spots Pattern Model Left Side (Sticker) - Set 75979 (Counterpart)
|
|
| Author: | randyf | | Posted: | Jun 26, 2020 15:41 | | Subject: | Inventory Change Request for Set 10273-1 | | Viewed: | 44 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Black {33299 Technic, Liftarm 1 x 3 with 2 Axle Holes and Pin / Crank to 61408 Technic, Liftarm 1 x 3 with 2 Axle Holes and Pin /Crank with Squared Pin Hole}
Comments from Submitter:
Verified by original submitter of inventory.
|
|
| Author: | wahiggin | | Posted: | Jun 26, 2020 14:31 | | Subject: | How do we get updated pictures for sets? | | Viewed: | 124 times | | Topic: | Inventories | | Status: | Open | |
|
|
I really love how this image looks. How can we get more updated images of classic
sets. I have several that I have been taking lately that I would be glad to
offer if needed.
https://photos.app.goo.gl/xCfQ6TybaG9XKLke8
Wesley
|
|
| Author: | ziddi | | Posted: | Jun 26, 2020 03:31 | | Subject: | Inventory Change Request for Set 41109-1 | | Viewed: | 18 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 58381pb13 White Door 1 x 3 x 4 Left - Open Between Top and Bottom Hinge with Male and Female Friends Silhouettes (Unisex Restroom) Pattern (Sticker) - Set 41109 (Counterpart)
|
| Author: | bb371467 | | Posted: | Jun 26, 2020 02:38 | | Subject: | Inventory Change Request for Set 60141-1 | | Viewed: | 19 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 8 Part 57895pb064 Trans-Light Blue Glass for Window 1 x 4 x 6 with 3 White Stripes Pattern (Sticker) - Set 60141 (Counterpart)
|
|
| Author: | randyf | | Posted: | Jun 25, 2020 17:58 | | Subject: | Inventory Change Request for Set 80010-1 | | Viewed: | 25 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Black {33299 Technic, Liftarm 1 x 3 with 2 Axle Holes and Pin / Crank to 61408 Technic, Liftarm 1 x 3 with 2 Axle Holes and Pin /Crank with Squared Pin Hole}
Comments from Submitter:
The original submitter of the inventory had this new variant. I also have this new variant in my set from sealed set contents.
|
|
| Author: | tons_of_bricks | | Posted: | Jun 25, 2020 13:52 | | Subject: | Decorated Statuettes..... | | Viewed: | 80 times | | Topic: | Catalog | | Status: | Open | |
|
| Ok, so this might open a can of worms, but is there a reason why some statuettes
are minifigures and others are minifig, untensil, decorated?? Or is it just
up to whatever the person who adds it feels like doing?
|
| Author: | gvbricks | | Posted: | Jun 25, 2020 05:28 | | Subject: | Inventory Change Request for Set 76140-1 | | Viewed: | 43 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 44567b Black Hinge Plate 1 x 2 Locking with 1 Finger on Side without Bottom Groove (Alternate) (match ID 1)
* Change 1 Part Black 44567a Hinge Plate 1 x 2 Locking with 1 Finger on Side with Bottom Groove {match ID 0 to 1}
|
|
| Author: | randyf | | Posted: | Jun 25, 2020 04:50 | | Subject: | Inventory Change Request for Set 4884-1 | | Viewed: | 39 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 9 Part Dark Bluish Gray {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End and 9 Teeth with Bottom Groove}
* Change 2 Part Light Bluish Gray {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (Undetermined Type) to 44301a Hinge Plate 1 x 2 Locking with 1 Finger On End with Bottom Groove}
* Change 1 Part Light Bluish Gray {44567 Hinge Plate 1 x 2 Locking with 1 Finger on Side (Undetermined Type) to 44567a Hinge Plate 1 x 2 Locking with 1 Finger on Side with Bottom Groove}
* Change 2 Part Reddish Brown {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End and 9 Teeth with Bottom Groove}
Comments from Submitter:
From sealed set contents.
|
|
| Author: | TtOoWwAa | | Posted: | Jun 24, 2020 23:33 | | Subject: | Parts in new colors by set history | | Viewed: | 72 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Hi,
Can we get a feature that tells us what year a part comes out in a new or previoustly
discontinued color for that part, or a previoustly discontinued color in general
(eg dark turqoise) and also the set that it comes in.
I say this because right now I have to wait for a new set to be on the web, look
closley at photos of it and see if there are any new part recolors, then I will
put it in a table with the part number, the color, the part name, the set it
comes in first, and the quandity.
Luckily Im only doing this with technic / sami-technic parts but as you might
imagine it is quite tedious.
I am aware that there is the NEW keyword bedide a part that has been released
in a new color however this does not tell us what set it comes in right away
because you can have a bricklink part catalog entry but the section "part appears
in" can be blank for a while,
I know that a load of people are interested in part recolors so I think this
feature would make the bricklink catalog a more powerful tool for lego fans!.
Any questions, leave a reply.
Thanks, SNIPE
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
Italy, Lombardia
Czech Republic, Moravskoslezský Kraj
Netherlands, Noord-Holland
)
)
Switzerland, Valais
USA, Pennsylvania
Canada, British Columbia
Germany, Sachsen
)
)
)
France, Île-de-France
Serbia, Južnobački okrug
United Kingdom, England