Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | Autour | Posted: | Apr 11, 2020 06:53 | Subject: | 3830c01 Hinge Brick 1 x 4 marked for deletion | Viewed: | 505 times | Topic: | Catalog | Status: | Open | |
|
| Hi,
The reason why 3830c01 Hinge Brick 1 x 4 Swivel is marked for deletion is not
justified IMHO ("it sets a precedent for adding dozens of unnecessary combinations
of hinges").
I don't think anyone has the intention to create colour-combinations for
these two parts combined.
Most sellers just want to sell the two parts together to avoid unequal (worthless)
quantities of the underlying parts.
So can this decision be undone please so that new items can be listed?
Best regards,
Kris - Autour des Briques
|
|
Author: | Stuart9 | Posted: | Apr 9, 2020 12:15 | Subject: | Another shade /colour variation | Viewed: | 76 times | Topic: | Catalog | Status: | Open | |
|
| Part 15107 in two shades of trans blue, only trans light blue known in sets but
trans medium blue listed for sale.
Thought I'd just confirm there are variations/different trans blues.
Info only.
|
|
Author: | AnthonyH | Posted: | Apr 8, 2020 06:40 | Subject: | 20mm high figures | Viewed: | 135 times | Topic: | Catalog | Status: | Open | |
|
| Do you list Lego 20mm high figures?
(They are marked "Lego" inside the stud hole at the top)
|
Author: | cosmicray | Posted: | Apr 7, 2020 09:11 | Subject: | Game set boxes | Viewed: | 77 times | Topic: | Catalog | Status: | Open | |
|
| This is a secondary concern, also having to do with Games being listed under
Gear.
In the case of G3853, there are a number of sellers trying to sell the empty
box. But Gear does not allow for listing Original Boxes, only Instructions. Therefore,
they are listing them under the primary set listing.
Can anything be done about this shortcoming in Gear ? I know that in Sets, it
is variable if a Set has Instructions or not. The same may apply within Gear
for Boxes.
Nita Rae
|
|
Author: | Autour | Posted: | Apr 6, 2020 13:50 | Subject: | 3024 plate 1x1 metallic gold : does it exist? | Viewed: | 131 times | Topic: | Catalog | Status: | Open | |
|
| Does 3024 plate 1x1 exist in Metallic Gold?
I do have some examples in front of me (genuine parts) that don't look at
all as Pearl Gold but do look as Metallic Gold. But the latter is not featured
as a known colour.
Can someone else confirm the existence of 3024 in Metallic Gold?
And if so, please add it to the catlogue as a known colour!
|
|
|
Author: | normann1974 | Posted: | Apr 5, 2020 18:59 | Subject: | Which stickered parts use variants? | Viewed: | 59 times | Topic: | Catalog | Status: | Open | |
|
| Working on inventory for set I was about to create the stickered counterpart
for the blue 1x2x1 panel with rounded corners, but I noticed that all stickered
counterparts for 1x2x1 panels are created as "4865pbXXX", ignoring which variant
of the panel it is. I guess sellers must specify it manually. On the other hand,
for the stickered 1x2x2 bricks, both variants of the brick exists as
and
* | | 3245bpb21 Brick 1 x 2 x 2 with Inside Axle Holder with Box and Arrows and Globe on Red Background Pattern (Sticker) - Set 7939 Parts: Brick, Decorated | . Why this difference?
/Jan
|
|
Author: | ForTheGirls | Posted: | Apr 5, 2020 10:41 | Subject: | scd001 and scd003 | Viewed: | 77 times | Topic: | Catalog | Status: | Open | |
|
| There is an error in the catalog regarding the heads for referenced minifigs.
The catalog says both scd001 and scd003 have the same heads, however they are
different if you look at their faces in the catalog. Also, if you look up the
head numbers on both, it says that 2 minifigs have the same head: scd001 and
scd003, but they don't.
In actuality, scd001 has head number 3626cpd1379; scd003 has 3626cpd1375. When
you try to look up 3626cpd1375, the catalog references head 3626cbpb1379. You
cannot buy 3626cpb1375 on the market, it automatically looks up 3626cbp1379.
This is the first time I've found an error in the catalog. I want to buy
3626cpb1375. Will I be notified when the catalog is fixed?
Thank you,
Ms. Dale Kurtz
For The Girls
|
|
Author: | grimsbricksuk | Posted: | Apr 5, 2020 04:05 | Subject: | Image added for SW Maul sw1091 | Viewed: | 77 times | Topic: | Catalog | Status: | Open | |
|
| I have added an image for star wars minifig sw1091 (Maul), please approve when
ready.
Thanks.
|
Author: | krazy_yvan | Posted: | Apr 4, 2020 15:56 | Subject: | Part 6553 | Viewed: | 90 times | Topic: | Catalog | Status: | Open | |
|
| Hello,
is this possible to ask for a description enhancement? The part 6553 for example
is just impossible to find without Jedi powers, it does not even have axle in
the name...
Is there a procedure for this kind of demand?
Thanks
|
Author: | nicmare | Posted: | Apr 3, 2020 09:27 | Subject: | packaging dimensions for 81000-1 | Viewed: | 52 times | Topic: | Catalog | Status: | Open | |
|
| the current dimensions are wrong:
262 x 188 x 44 cm
correct:
260x188x45 mm
|
Author: | BrickenbergNC | Posted: | Apr 3, 2020 02:04 | Subject: | Possible New Item Number? | Viewed: | 118 times | Topic: | Catalog | Status: | Open | |
|
| Not 100% sure how to submit this, but there may be a new item number for part
60471: Hinge Plate 1 x 2 Locking with 2 Fingers on Side. See the attached picture
from Lego.com.
|
|
Author: | leopard37 | Posted: | Mar 31, 2020 18:24 | Subject: | Santa Porg | Viewed: | 93 times | Topic: | Catalog | Status: | Open | |
|
| Is there a reason that this poor little fellow:
doesn't have his hat? I can add if no good reason.
Thanks,
Tyson.
|
|
|
Author: | runner.caller | Posted: | Mar 31, 2020 10:46 | Subject: | Is there a plan to resurrect special assemlie | Viewed: | 105 times | Topic: | Catalog | Status: | Open | |
|
| Any plan to resurrect special assemblies?
I came across a mostly complete
I didn't want to break the hulkbuster down so I decided I'd list him
on another site and oh boy...
Apparently said site has a new policy where buyers can request a cancellation
in the first hour.
Didn't see that message request and printed a label while I was in paypal
printing 10 other labels for bricklink.
Apparently, the action of printing a label automatically denies a buyer's
cancellation request.
Which is silly as I had no problem refunding since I hadn't shipped.
The other site would not let me cancel and refund through them. I got in contact
with CS and they said I had to refund through the paypal transaction since "I
denied the original request".
Then if I gave CS the paypal transaction, they would give me credit for the fees,
but I'm not holding my breath. I'm guessing they'll credit back the
final value fee, but I'm definitely out on the papal fees and the jury's
out on the sales tax.
Funny how THEY charge the buyer sales tax, and then when YOU give a full refund,
the sales tax portion gets refunded out of YOUR balance!?
Another funny thing is that paypal adds the sales tax that ebay collects to the
total and charges you 2.9% on that total. So you're paying a percent fee
on a percent tax collected by another entity..
I personally don't feel there should be sales tax on used items.
These days, that other site is about only good for buying and sorting out high
quality pcs to relist on this site.
So if special assemblies are a hassle with inventories, can we list partial components
of sets as "custom items"?
|
|
|
Author: | Davemerz | Posted: | Mar 30, 2020 13:52 | Subject: | Help Id this torso | Viewed: | 98 times | Topic: | Catalog | Status: | Open | |
|
| White torso with black pattern, white arms and hands |
|
Author: | Demiurge | Posted: | Mar 29, 2020 05:07 | Subject: | How to approve my change? | Viewed: | 63 times | Topic: | Catalog | Status: | Open | |
|
| Hi! I added a few Large Catalogs a week ago + added Images for this catalogs.
But they still have the status "Pending Approval". What can I do for approving
them?
|
Author: | Leftoverbricks | Posted: | Mar 29, 2020 04:24 | Subject: | where to change weight of GEAR instructions? | Viewed: | 33 times | Topic: | Catalog | Status: | Open | |
|
| ^ |
Author: | MD14 | Posted: | Mar 28, 2020 21:26 | Subject: | Help identify part | Viewed: | 90 times | Topic: | Catalog | Status: | Open | |
|
| I have torso v neck blue overalls with white arms and wide stitch spacing on
overalls as seen in picture of listing cty0340.
However when i go into the parts of that listing the torso has a different tight
stitch spacing and the head post has the black part on it(mine does not have
this black mark either). I have looked and am unable to find any other pictures
or references.
I have 3 of them if that helps.
Wondering if anyone can identify the difference and what set i may have that
they specifically come from.
Thanks
Todd
|
Author: | primadeluxe | Posted: | Mar 28, 2020 05:11 | Subject: | How to add weight and size of instructions? | Viewed: | 46 times | Topic: | Catalog | Status: | Open | |
|
| How can I do this? I can not find it ..... Thanks! |
Author: | mokibricks | Posted: | Mar 26, 2020 03:21 | Subject: | Adding missing items to the catalog | Viewed: | 76 times | Topic: | Catalog | Status: | Open | |
|
| Hi,
I recently bought a holder for trading cards, and it has a list of all the possible
cards (SW Series 2) with their numbers. Does it help if I add all the items to
the catalog? I have a few more where I will also add the images of the cards,
but in many cases, I won't.
Thanks,
Tamas
|
|
Author: | fooleeze | Posted: | Mar 25, 2020 14:47 | Subject: | ToysRUs & Barnes&Noble Build Event Sets | Viewed: | 103 times | Topic: | Catalog | Status: | Open | |
|
| Hello all, I've got several Toys R Us and Barnes & Noble build event sets
(May 4th promo events, etc). I don't see these sets in the Bricklink Catalog.
Is it possible to add those? (Can I submit them?) Or is this an area that
is not added to the catalog typically?
Thanks for your time!
Todd
|
Author: | OliverM22 | Posted: | Mar 24, 2020 18:31 | Subject: | Store | Viewed: | 95 times | Topic: | Catalog | Status: | Open | |
|
| If anyone has a store in the uk and has these parts in it let me know thanks.
I know it’s a very small order
|
|
Author: | Bobflip | Posted: | Mar 22, 2020 22:40 | Subject: | Submitting counterparts without photographs | Viewed: | 75 times | Topic: | Catalog | Status: | Open | |
|
| I've submitted a load of stickered counterparts for set 75877, unfortunately
I'm missing the following four parts so can't take photographs (and needed
to add them to the database to make them easier to find for sale!). The others
have been approved but not sure what to do for these ones?
6636pb214
54200pb095L
54200pb095R
54200pb096R
|
|
Author: | crazylegoman | Posted: | Mar 21, 2020 16:19 | Subject: | Wheel plate stuck on car chassis piece | Viewed: | 105 times | Topic: | Catalog | Status: | Open | |
|
| Does anyone know if
is meant to be able to be removed from
* | | 11650c01 Vehicle, Base 5 x 10 x 2 1/2 with Mudguards and 6 x 2 Recessed Center with 3 Holes with (Same Color) Wheels Holders Attached Parts: Vehicle, Base |
once they are together?
I feel like the axles are going to snap off of the 2X2 plates if I pull any herder
than I already am. Also, I've never seen a post with a tapered part at the
end like the chassis piece has. It seems a bit like those Bionicle brains and
heads.
David
|
|
Author: | Bendix | Posted: | Mar 21, 2020 06:47 | Subject: | How to add to the catalog? WM soccer team | Viewed: | 61 times | Topic: | Catalog | Status: | Open | |
|
| I just came across of a set of 6 Legoland Sierksdorf postcards: 5 are showing
the German WM soccer team of 1974 on a visit a Legoland Sierksdorf (black and
white). The sixth one shows the entrance of Legoland Sierksdorf and on the back
there are autographs of the soccer team.
I only came twice across this set in a lot of years - add to the catalog as a
set or single?
Thanks for any advice
Beryll
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|