Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | oukexergon  | | Posted: | Feb 11, 2020 13:36 | | Subject: | Inventory Change Request for Set 76048-1 | | Viewed: | 21 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 45301pb044L Black Wedge 16 x 4 Triple Curved with Red Octopus (Marvel HYDRA Logo) Pattern Model Left Side (Sticker) - Set 76048 (Counterpart)
* Add 1 Part 45301pb044R Black Wedge 16 x 4 Triple Curved with Red Octopus (Marvel HYDRA Logo) Pattern Model Right Side (Sticker) - Set 76048 (Counterpart)
|
 |
| Author: | Skumby | | Posted: | Feb 11, 2020 12:21 | | Subject: | add a stickered piece to the catalog | | Viewed: | 51 times | | Topic: | Catalog | | Status: | Open | |
|
| Forgive me if this is in the wrong place, but I have no idea how this works.
I have a stickered piece from this set:
https://www.bricklink.com/v2/catalog/catalogitem.page?S=70909
That does not seem to exist in the catalog. How do I go about adding it or telling
someone to add it? Thanks!
|
| Author: | Harald1643 | | Posted: | Feb 11, 2020 12:05 | | Subject: | Inventory Change Request for Set 76076-1 | | Viewed: | 21 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 3062b Trans-Light Blue Brick, Round 1 x 1 Open Stud
|
| Author: | SezaR | | Posted: | Feb 11, 2020 05:04 | | Subject: | Inventory Change Request for Set 165-1 | | Viewed: | 35 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change {11 to 10} Part Red 3009 Brick 1 x 6
* Change {8 to 9} Part Red 3008 Brick 1 x 8
|
| Author: | FreeStorm | | Posted: | Feb 10, 2020 15:08 | | Subject: | Inventory change on minifig | | Viewed: | 74 times | | Topic: | Inventories | | Status: | Open | |
|
| What is the procedure when the inventory of a minifig is wrong?
Should I make the inventory change request like with set, or create a new minifig
and mark for deletion the older one?
Of course, the picture is also wrong.
-Fred
|
| Author: | anathema | | Posted: | Feb 10, 2020 14:38 | | Subject: | Inventory Change Request for Set 8847-1 | | Viewed: | 51 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part {White to Light Gray} 3701 Technic, Brick 1 x 4 with Holes {Alternate to Regular}
Comments from Submitter:
The second version of the instructions shows this part as light grey.
|
| Author: | dmaster.hu | | Posted: | Feb 10, 2020 13:21 | | Subject: | Inventory Change Request for Set 75954-1 | | Viewed: | 23 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3024 Trans-Orange Plate 1 x 1 (Extra)
|
| Author: | mollysmommy | | Posted: | Feb 9, 2020 17:38 | | Subject: | Number of Poly Bags in Sets?? | | Viewed: | 71 times | | Topic: | Inventories | | Status: | Open | |
|
| Is there any SOURCE that lists the NUMBER of poly bags in each set, especially
the older sets when the bags were not numbered? Would like to list a set as
“box opened, bags still sealed” but do not know if I am missing any bags. (Set
#7662 (SW: Trade Federation MTT) in particular this time).
|
|
| Author: | paulvdb | | Posted: | Feb 9, 2020 11:54 | | Subject: | Inventory Change Request for Set 6667-1 | | Viewed: | 34 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 5 Part 2412a Light Gray Tile, Modified 1 x 2 Grille without Bottom Groove / Lip (match ID 2)
* Change 5 Part Light Gray 2412b Tile, Modified 1 x 2 Grille with Bottom Groove / Lip {Regular to Alternate} {match ID 0 to 2}
Comments from Submitter:
https://forum.brickpirate.net/viewtopic.php?f=18&t=24109 shows 2412a. Set in my personal collection has 2412b so both variants should be in this inventory.
|
|
| Author: | evvdu95 | | Posted: | Feb 9, 2020 09:35 | | Subject: | Inventory Change Request for Set 6667-1 | | Viewed: | 28 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 4073 Black Plate, Round 1 x 1 (Extra)
* Add 1 Part 4073 Trans-Yellow Plate, Round 1 x 1 (Extra)
Comments from Submitter:
Sealed set review here:
https://forum.brickpirate.net/viewtopic.php?f=18&t=24109
|
| Author: | Lamondera | | Posted: | Feb 9, 2020 06:53 | | Subject: | 3297 smooth or rough surface? | | Viewed: | 88 times | | Topic: | Catalog | | Status: | Open | |
|
| Hello, I have two different versions of the slope 3297, some smooth and some
with a rough surface. Is there a single entry for both?
|
|
| Author: | axaday | | Posted: | Feb 8, 2020 23:36 | | Subject: | Inventory Change Request for Set 4758-1 | | Viewed: | 41 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 4032b Black Plate, Round 2 x 2 with Axle Hole - X Opening (Alternate) (match ID 1)
* Add 1 Part 32064b Light Bluish Gray Technic, Brick 1 x 2 with Axle Hole - X Opening (Alternate) (match ID 2)
* Add 1 Part 4032b Yellow Plate, Round 2 x 2 with Axle Hole - X Opening (Alternate) (match ID 3)
* Change 2 Part Reddish Brown {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove}
* Change 2 Part Dark Bluish Gray {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (undetermined type) to 44301a Hinge Plate 1 x 2 Locking with 1 Finger On End with Bottom Groove}
* Change 1 Part Black 4032 Plate, Round 2 x 2 with Axle Hole {match ID 0 to 1}
* Change 1 Part Light Bluish Gray 32064 Technic, Brick 1 x 2 with Axle Hole {match ID 0 to 2}
* Change 1 Part Yellow 4032 Plate, Round 2 x 2 with Axle Hole {match ID 0 to 3}
Comments from Submitter:
I apologize for no pictures. I was so excited about the dark nougat bar that I forgot I had other undetermined pieces. When I set out to sort out the set I dumped all the bags and then started to find variants when it was too late.
|
|
| Author: | Brixalotl | | Posted: | Feb 8, 2020 22:38 | | Subject: | Inventory Change Request for Set 76134-1 | | Viewed: | 30 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 44302b Dark Bluish Gray Hinge Plate 1 x 2 Locking with 2 Fingers on End without Bottom Groove (Alternate) (match ID 1)
* Change 2 Part Dark Bluish Gray 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove {match ID 0 to 1}
Comments from Submitter:
found both variants during part out, thanks
|
|
| Author: | RecycledBrick | | Posted: | Feb 8, 2020 22:13 | | Subject: | Inventory Change Request for Set 70356-1 | | Viewed: | 31 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 87079pb666 Dark Bluish Gray Tile 2 x 4 with Dark Purple Stone Pattern (Sticker) - Set 70356 (Counterpart)
* Add 1 Part 3039pb130 Dark Bluish Gray Slope 45 2 x 2 with Stone and Energy Pattern (Sticker) - Set 70356 (Counterpart)
* Add 1 Part 15068pb223 Dark Bluish Gray Slope, Curved 2 x 2 with Stone and Energy Pattern (Sticker) - Set 70356 (Counterpart)
* Add 1 Part 24309pb015 Black Slope, Curved 3 x 2 with Stone and Energy Pattern (Sticker) - Set 70356 (Counterpart)
* Add 1 Part 22387pb003 Black Panel 2 x 6 x 6 With Window Slot with Stone and Energy Pattern (Stickers) - Set 70356 (Counterpart)
* Add 1 Part 60581pb131 Black Panel 1 x 4 x 3 with Side Supports - Hollow Studs with Stone and Energy Pattern (Sticker) - Set 70356 (Counterpart)
* Add 1 Part 87544pb056L Black Panel 1 x 2 x 3 with Side Supports - Hollow Studs with Stone and Energy Pattern Model Left Side (Sticker) - Set 70356 (Counterpart)
* Add 1 Part 87544pb056R Black Panel 1 x 2 x 3 with Side Supports - Hollow Studs with Stone and Energy Pattern Model Right Side (Sticker) - Set 70356 (Counterpart)
|
|
| Author: | mfav | | Posted: | Feb 8, 2020 21:08 | | Subject: | Description standardization note | | Viewed: | 168 times | | Topic: | Catalog | | Status: | Open | |
|
| It would be good for consistency in the catalog description if all instances
of numbers were either integers or words, not arbitrarily some of each.
So:
Three eyeballs, Three earlobes
or
3 eyeballs, 3 earlobes
not
Three eyeballs, 3 earlobes
...that kind of thing.
There are pros and cons for each option. Please investigate how the search mechanism
works to see which option yields better results.
|
|
| Author: | waltzking | | Posted: | Feb 8, 2020 19:49 | | Subject: | Inventory Change Request for Set 60270-1 | | Viewed: | 32 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 30258pb018 Black Road Sign Clip-on 2 x 2 Square with Curved Blue Lines and Small Black Squares Pattern (Computer Screen)
* Add 1 Part 15210pb002 Black Road Sign Clip-On 2 x 2 Square Open O Clip with Curved Blue Lines and Small Black Squares Pattern (Computer Screen)
|
|
| Author: | axaday | | Posted: | Feb 8, 2020 17:41 | | Subject: | Inventory Change Request for Set 4758-1 | | Viewed: | 49 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part {Earth Orange to Dark Nougat} 30374 Bar 4L (Lightsaber Blade / Wand)
Comments from Submitter:
Pics to follow
|
| Author: | OmnipresentECA | | Posted: | Feb 8, 2020 15:30 | | Subject: | Sticker # When adding Items | | Viewed: | 52 times | | Topic: | Catalog | | Status: | Open | |
|
| I have come across a few tiles with stickers that are not in the catalog.
, nor in their set inventory.
How do I go about determining the Sticker # when Adding to the catalog.
For example one is a 87079pb###, how do I determine the last few digits?
|
| Author: | paulvdb | | Posted: | Feb 8, 2020 14:38 | | Subject: | Inventory Change Request for Set 9463-1 | | Viewed: | 22 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 3 Part Dark Red {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
See https://youtu.be/wV8s1Rckao0
|
| Author: | L.tide | | Posted: | Feb 8, 2020 10:47 | | Subject: | Inventory Change Request for Set 10715-1 | | Viewed: | 26 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 34337 White Wheel 8mm D. x 6mm with Slot (Extra)
Comments from Submitter:
last one extra piece to have it complete
|
|
| Author: | SezaR | | Posted: | Feb 8, 2020 02:55 | | Subject: | Inventory Change Request for Set 6074-1 | | Viewed: | 38 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Blue 4502a Minifigure, Plume Feather Small {Regular to Extra}
* Change 1 Part Red 4502a Minifigure, Plume Feather Small {Regular to Extra}
Comments from Submitter:
I do not see these parts used on any model. If they are not going to be in the inventory as sprue, isn't it better to move them to the extra section?
|
|
| Author: | grimsbricksuk | | Posted: | Feb 8, 2020 00:48 | | Subject: | Inventory Change Request for Gear DScaseSW2 | | Viewed: | 25 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Minifig {sw0201 Clone Trooper Clone Wars to sw1090 Clone Trooper Clone Wars - Anakin Head (DScaseSW2)}
|
| Author: | SezaR | | Posted: | Feb 7, 2020 15:45 | | Subject: | Inventory Change Request for Set 560-1 | | Viewed: | 32 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part BA108pb01 Red Stickered Assembly 3 x 6 x 1 with Awning Pattern (Sticker) - Sets 376-2 and 560-1 - 1 Slope 33 3 x 4, 1 Slope 33 3 x 2 (Counterpart)
|
| Author: | SezaR | | Posted: | Feb 7, 2020 15:44 | | Subject: | Inventory Change Request for Set 376-2 | | Viewed: | 24 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part BA108pb01 Red Stickered Assembly 3 x 6 x 1 with Awning Pattern (Sticker) - Sets 376-2 and 560-1 - 1 Slope 33 3 x 4, 1 Slope 33 3 x 2 (Counterpart)
|
| Author: | Jan_K | | Posted: | Feb 7, 2020 15:28 | | Subject: | Inventory Change Request for Set 6255-1 | | Viewed: | 33 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Book 102717US Pirate Comic - The Golden Medallion (102717-USA) (Alternate) (match ID 1)
Comments from Submitter:
US version of the set.
|
|
| Author: | StormChaser | | Posted: | Feb 7, 2020 14:45 | | Subject: | February Roadmap Project: Old and New | | Viewed: | 243 times | | Topic: | Catalog | | Status: | Open | |
|
| We are finally making serious headway with the catalog backlog. The catalog
change requests queue is cleared out.
In the spirit of trying to ensure that the Catalog Roadmap is not just something
to look at, I am continuing with the goal of moving through one project each
month. We have essentially had a January project (flesh to nougat) and there
is a new project starting today for February:
https://www.bricklink.com/help.asp?helpID=2476
What is this project?
This project involves accurately describing the differences between early (old)
versions of an item and later (new) versions. We need this for two reasons:
1. Using the words "old" and "new" were easy ways to avoid having to describe
actual differences between items. Set numbers in minifigure titles performed
the same function, which is why they were removed.
2. When a third version of an item appears, the old/new descriptors are useless.
Similar items should be described by their differences (usually the way in which
the later version is different from the earlier version).
There are around 500-1000 items expected to be affected by this project.
How can members contribute?
For the immediate moment, members may contribute by submitting title change requests.
I'm not sure how we're going to do item numbers yet, so hold off on
those. If you're not confident that you know exactly what this project entails
or need clarification on a specific issue, then please ask before submitting
a request.
For the immediate moment, ignore the additional topic bundled with this project
(looking at the use of with/without in titles). We may be able to include that,
or it may need to be made its own project. This project should also look at
the use of early/later descriptors since they serve the same function as the
terms old/new.
The goal is to wrap this up by the end of February. Of course, we also have
catalog work still to do and that takes precedence over projects - so this may
run over schedule.
|
|
| Author: | saosivert | | Posted: | Feb 7, 2020 13:34 | | Subject: | Inventory Change Request for Set 70593-1 | | Viewed: | 38 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 50950pb123 Dark Green Slope, Curved 3 x 1 with Scales and Gold Lion Head Pattern (Sticker) - Set 70593 (Counterpart)
|
| Author: | Gp8871 | | Posted: | Feb 7, 2020 12:54 | | Subject: | Inventory Change Request for Set 75095-1 | | Viewed: | 22 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 90498pb15 Black Tile 8 x 16 with Bottom Tubes with TIE/Ln Starfighter Pattern (Sticker) - Set 75095 (Counterpart)
|
|
| Author: | Brick.Door | | Posted: | Feb 7, 2020 10:39 | | Subject: | 30374 Bar 1x4 Frosted Variant | | Viewed: | 84 times | | Topic: | Catalog | | Status: | Open | |
|
| Found some frosted trans-light-blue 1x4 bars in a set recently and I'm not
comfortable mixing them with my current inventory. They are quite different and
I don't think a customer who orders several would be happy getting a mixture.
The additional notes state:
"Alternate item number 28697 is used for transparent colors. This mold variant
has no bubbles and number 28697 molded on it. It has been found in two variations
clear and frosted as showed on additional images."
So it seems the catalog admins are aware of the difference and have decided not
to reflect it in the catalog here? Personally I think this is a mold variation
worth recognizing.
|
|
| Author: | Hygrotus | | Posted: | Feb 7, 2020 07:32 | | Subject: | Inventory Change Request for Set 9496-1 | | Viewed: | 32 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3626cpb0749 Reddish Brown Minifigure, Head Moustache Thin Split, Smile, Eyebrows, Eyes with White Pupils Pattern (SW Lando) - Hollow Stud (Alternate) (match ID 5)
Comments from Submitter:
Please also add a note to
This minifigure has been found with both the 'b' and 'c' style head.
|
|
| Author: | Hygrotus | | Posted: | Feb 7, 2020 01:20 | | Subject: | Inventory Change Request for Set 41403-1 | | Viewed: | 21 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 64454pb01 Lime Container, Box 3 x 8 x 6 2/3 Half Back with Towel, Bottles, Stethoscope, Leash and Collar Pattern (Sticker) - Set 41403 (Counterpart)
* Add 1 Part 15210pb058 Dark Bluish Gray Road Sign Clip-On 2 x 2 Square Open O Clip with Bunny on Orange Square Pattern (Sticker) - Set 41403 (Counterpart)
* Add 1 Part 85984pb240 Light Aqua Slope 30 1 x 2 x 2/3 with Dark Azure Gauge Pattern (Sticker) - Set 41403 (Counterpart)
|
|
| Author: | rick_holl | | Posted: | Feb 6, 2020 16:52 | | Subject: | The 6x6 tiles in 10227 B-Wing | | Viewed: | 104 times | | Topic: | Catalog | | Status: | Open | |
|
| Anyone knows if those tiles are flat or they have a shiny finish?
Thank you
|
| Author: | FreeStorm | | Posted: | Feb 6, 2020 06:07 | | Subject: | Inventory Change Request for Set 7760-1 | | Viewed: | 24 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* | | 7760-1 (Inv) Electric Diesel Locomotive (Diesel Shunter Locomotive)
144 Parts, 2 Minifigures, 1980
Sets: Train: 12V |
* Change {1 to 2} Part Blue 3004pb033 Brick 1 x 2 with White '7760' Pattern (Sticker) - Set 7760 (Counterpart)
Comments from Submitter:
Add another part for right side of the locomotive.
|
|
| Author: | Adjour | | Posted: | Feb 6, 2020 00:36 | | Subject: | Correction sheet for set 8847 | | Viewed: | 80 times | | Topic: | Catalog | | Status: | Open | |
|
| The old dragster set has a white correction sheet for step 16. It has a part
number on the page that doesn't show up in searches (120356).
Am I missing the entry somewhere? If not, should an entry exist? Or a note with
the instructions entry? (I could have sworn I had seen a note about this previously...)
Thanks!! 
|
| Author: | JustBricks | | Posted: | Feb 5, 2020 18:28 | | Subject: | Inventory Change Request for Part spa0010 | | Viewed: | 32 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change {4 to 5} Part Dark Green 3023 Plate 1 x 2
Comments from Submitter:
According to the picture and instructions there should be two per leg and one on the torso.
|
|
| Author: | jblock | | Posted: | Feb 5, 2020 17:25 | | Subject: | Inventory Change Request for Set 1846-1 | | Viewed: | 34 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 4744px6 Yellow Brick, Modified 2 x 4 x 2 Double Curved Top with Lion Face Pattern
* Change {1 to 2} Part Yellow 4744px11 Brick, Modified 2 x 4 x 2 Double Curved Top with Tiger Face Pattern
Comments from Submitter:
Based on picture of the polybag, both decorated 4744 parts should be the "tiger face" brick with whiskers on the decoration (the "lion face" brick decoration has no whiskers).
|
|
| Author: | Hygrotus | | Posted: | Feb 5, 2020 13:12 | | Subject: | Inventory Change Request for Set 7667-1 | | Viewed: | 28 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Minifig {sw0166 Shadow Trooper to sw0166a Shadow Trooper - Short Line on Back}
Comments from Submitter:
Only this one set I can confirm from my own set never mixed.
https://www.bricklink.com/message.asp?ID=1178937
|
|
| Author: | Grinjer1 | | Posted: | Feb 5, 2020 13:06 | | Subject: | Identifying minifigures | | Viewed: | 73 times | | Topic: | Catalog | | Status: | Open | |
|
| I have a batch of incomplete minifigures. I need help identifying them to find
out what parts I need to complete them. I seem to remember there were a couple
of sites which had this information but I can't remember the names.
Can anyone help please?
|
|
| Author: | Hygrotus | | Posted: | Feb 5, 2020 12:31 | | Subject: | Shadow Trooper | | Viewed: | 150 times | | Topic: | Catalog | | Status: | Open | |
|
|
Interesting, more than ten years and almost nobody noticed it.
(OK I understand we can see them only from the front as they never retreat when
they attack so you can't see their back  )
Interesting in our catalog torso is showed without long line.
According to the information which I found here
http://minifigs.nl/swminifigs/mfnl-shadow-ms.html
one with long line could be from magnet set from 2009.
* | | 852715 (Inv) Magnet Set, Minifigures SW (3) - Darth Vader, Snowtrooper, Shadow Trooper - with 2 x 4 Brick Bases blister pack
Gear: Magnet: Star Wars |
so from sets which were issued earlier 2007 and 2008 could be one with short
line
My with short line is from set
I have also two in my collection with long line but bought them years ago loose
without sets.
I submitted both as new as in this case sw0166 should be marked for deletion
as we don't know which one is currently sell under this entry.
|
|
|
| Author: | toontexas | | Posted: | Feb 5, 2020 00:53 | | Subject: | Inventory Change Request for Set 75236-1 | | Viewed: | 40 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 87083 Dark Bluish Gray Technic, Axle 4 with Stop (Alternate) (match ID 1)
Comments from Submitter:
I parted out two sets. One set had a red axle 3703 plus a dbg axle 87083, the other set had only two dbg axles 87083 (no red axle).
|
|
| Author: | qwertyboy | | Posted: | Feb 4, 2020 19:46 | | Subject: | Inventory Change Request for Set 10242-1 | | Viewed: | 35 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 2431pb613 Black Tile 1 x 4 with 'HG CT487' License Plate on White Background Pattern (Sticker) - Set 10242 (Counterpart)
* Add 1 Part 2431pb613 Dark Green Tile 1 x 4 with 'HG CT487' License Plate on White Background Pattern (Sticker) - Set 10242 (Counterpart)
Comments from Submitter:
Stickered license plates
|
|
| Author: | randyf | | Posted: | Feb 4, 2020 13:44 | | Subject: | I'm back! | | Viewed: | 212 times | | Topic: | Inventories | | Status: | Open | |
|
| Just a quick note to let everyone know that I am back in the saddle for BrickLink!
I will begin by hammering on the backlog of pending inventories later today.
If you have been waiting for these inventories to part out, please have a bit
more patience as I work through these since there are a significant amount to
catch up on.
Cheers,
Randy
|
| Author: | beasville | | Posted: | Feb 4, 2020 09:40 | | Subject: | Inventory Change Request for Set 60002-1 | | Viewed: | 34 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 85861 Yellow Plate, Round 1 x 1 with Open Stud
Comments from Submitter:
this piece is missing from the BL inventory.
|
|
| Author: | Honig | | Posted: | Feb 4, 2020 05:58 | | Subject: | NAM (Shell) Holiday Set 2014 Christmas Tree | | Viewed: | 67 times | | Topic: | Catalog | | Status: | Open | |
|
| Hello,
I get a NAM (Shell) 2014 Christmas Holiday Giveaway from the brand Blokbrick
with seemed to cooperate with the Lego Company.
I've never seen these item and it's not listet in the bricklink.
Probably these set is an interseting item for the bricklink catalouge. If these
set will listed, I can send you better pictures, a tile list and the instruction
as pdf.
The parts are completly orignial Lego, the 1x1 Tile with the NAM Logo is printed.
Greetings from germany
Holger Honig
|
|
|
| Author: | samsam2 | | Posted: | Feb 3, 2020 21:27 | | Subject: | Inventory Change Request for Set 76078-1 | | Viewed: | 39 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 3 Part 85984pb239 Light Bluish Gray Slope 30 1 x 2 x 2/3 with Dark Red Broken Edge Pattern (Sticker) - Set 76078 (Counterpart)
|
|
| Author: | samsam2 | | Posted: | Feb 3, 2020 21:24 | | Subject: | Inventory Change Request for Set 41335-1 | | Viewed: | 28 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 42511pb21 Orange Minifigure, Utensil Skateboard with Trolley Wheel Holders with Magenta Flame Pattern (Sticker) - Set 41335 (Counterpart)
* Add 7 Part 3069bpb765 Lime Tile 1 x 2 with Groove with Green Wood Grain Pattern (Sticker) - Set 41335 (Counterpart)
* Add 3 Part 2431pb616 Lime Tile 1 x 4 with Green Wood Grain and 4 Screws Pattern (Sticker) - Set 41335 (Counterpart)
|
|
| Author: | SurplusParts | | Posted: | Feb 3, 2020 18:14 | | Subject: | Adding photos to the Catalogue | | Viewed: | 67 times | | Topic: | Catalog | | Status: | Open | |
|
| When adding photos to the catalogue, can you only add 1 at a time for the same
part?
I just added 2 photos of a new part that i added to the catalogue, one a rendered
photo and the other showing the part from 2 angles. Now it only shows the second
photo i added and the other has disappeared.
Cheers
|
| Author: | Prestondj | | Posted: | Feb 3, 2020 17:13 | | Subject: | Inventory Change Request for Set 7632-1 | | Viewed: | 22 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change {60 to 62} Part Dark Bluish Gray 57518 Technic, Link Tread Wide with Two Pin Holes
|
| Author: | axaday | | Posted: | Feb 3, 2020 16:56 | | Subject: | 3626cpb1788 Will Still Say Flesh | | Viewed: | 128 times | | Topic: | Colors | | Status: | Open | |
|
|
* | | 3626cpb1788 Minifigure, Head Dual Sided Alien Black Moustache, Skeleton with Lavender Eye Showing through Torn Skin Left, Angry / Scared Pattern - Hollow Stud
Parts: Minifigure, Head |
|
| Author: | EricLeilani | | Posted: | Feb 3, 2020 16:26 | | Subject: | Inventory Change Request for Set 7258-1 | | Viewed: | 28 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 2569 Dark Bluish Gray Antenna Whip 8H
Comments from Submitter:
The inventory is missing one dark bluish gray antenna. Two go on the rolling droid and one on the Walker droid.
|
| Author: | mfav | | Posted: | Feb 3, 2020 15:26 | | Subject: | Nougats reference | | Viewed: | 179 times | | Topic: | Colors | | Status: | Open | |
|
| http://v4ei.com/brickref/
And. It's not funny.
|
|
| Author: | leopard37 | | Posted: | Feb 3, 2020 13:52 | | Subject: | Hey Catalog Associates! | | Viewed: | 154 times | | Topic: | Inventories | | Status: | Open | |
|
| Morning/Afternoon/Evening,
Little guidance please, which way will you be leaning with the following minifigure
inventory:
The two pictures are from the instructions of set 70429.
Neither the inventory for the set nor the minifigure have been submitted yet
(I don't have it on hand - therefore I'm not going to endeavor to submit).
Would you say the picture from page 5 is complete or should it include the inventory
of the backpack as well shown on page 7.
Thanks in advance.
Tyson.
|
|
| Author: | Hygrotus | | Posted: | Feb 3, 2020 10:12 | | Subject: | Colors names - my proposition | | Viewed: | 179 times | | Topic: | Colors | | Status: | Open | |
|
| My proposition for color names
Short, simple and nice looking
|
|
|
| Author: | runner.caller | | Posted: | Feb 3, 2020 09:23 | | Subject: | Not Enough Nougats | | Viewed: | 203 times | | Topic: | Colors | | Status: | Open | |
|
| I don't think there are enough Nougats.
I propose the following updated color list with codes.
1 . White Nougat
49 . Very Light Gray Nougat
99 . Very Light Bluish Gray Nougat
86 . Light Bluish Gray Nougat
9 . Light Gray Nougat
10 . Dark Gray Nougat
85 . Dark Bluish Gray Nougat
11 . Black Nougat
59 . Dark Red Nougat
5 . Red Nougat
27 . Rust Nougat
220 . Coral Nougat
25 . Salmon Nougat
26 . Light Salmon Nougat
58 . Sand Red Nougat
88 . Reddish Brown Nougat
8 . Brown Nougat
120 . Dark Brown Nougat
69 . Dark Tan Nougat
2 . Tan Nougat
90 . Light Nougat
28 . Nougat
150 . Medium Nougat
225 . Dark Nougat Nougat
91 . Medium Brown Nougat
106 . Fabuland Brown Nougat
160 . Fabuland Orange Nougat
29 . Earth Orange Nougat
68 . Dark Orange Nougat
165 . Neon Orange Nougat
4 . Orange Nougat
31 . Medium Orange Nougat
110 . Bright Light Orange Nougat
32 . Light Orange Nougat
96 . Very Light Orange Nougat
161 . Dark Yellow Nougat
3 . Yellow Nougat
103 . Bright Light Yellow Nougat
33 . Light Yellow Nougat
35 . Light Lime Nougat
158 . Yellowish Green Nougat
166 . Neon Green Nougat
76 . Medium Lime Nougat
34 . Lime Nougat
155 . Olive Green Nougat
80 . Dark Green Nougat
6 . Green Nougat
36 . Bright Green Nougat
37 . Medium Green Nougat
38 . Light Green Nougat
48 . Sand Green Nougat
39 . Dark Turquoise Nougat
40 . Light Turquoise Nougat
41 . Aqua Nougat
152 . Light Aqua Nougat
63 . Dark Blue Nougat
7 . Blue Nougat
153 . Dark Azure Nougat
156 . Medium Azure Nougat
42 . Medium Blue Nougat
72 . Maersk Blue Nougat
105 . Bright Light Blue Nougat
62 . Light Blue Nougat
87 . Sky Blue Nougat
55 . Sand Blue Nougat
97 . Blue-Violet Nougat
109 . Dark Blue-Violet Nougat
43 . Violet Nougat
73 . Medium Violet Nougat
44 . Light Violet Nougat
89 . Dark Purple Nougat
24 . Purple Nougat
93 . Light Purple Nougat
157 . Medium Lavender Nougat
154 . Lavender Nougat
54 . Sand Purple Nougat
71 . Magenta Nougat
47 . Dark Pink Nougat
94 . Medium Dark Pink Nougat
104 . Bright Pink Nougat
23 . Pink Nougat
56 . Light Pink Nougat
12 . Trans-Clear Nougat
13 . Trans-Black Nougat
17 . Trans-Red Nougat
18 . Trans-Neon Orange Nougat
98 . Trans-Orange Nougat
164 . Trans-Light Orange Nougat
121 . Trans-Neon Yellow Nougat
19 . Trans-Yellow Nougat
16 . Trans-Neon Green Nougat
108 . Trans-Bright Green Nougat
221 . Trans-Light Green Nougat
20 . Trans-Green Nougat
14 . Trans-Dark Blue Nougat
74 . Trans-Medium Blue Nougat
15 . Trans-Light Blue Nougat
113 . Trans-Very Lt Blue Nougat
114 . Trans-Light Purple Nougat
51 . Trans-Purple Nougat
50 . Trans-Dark Pink Nougat
107 . Trans-Pink Nougat
21 . Chrome Gold Nougat
22 . Chrome Silver Nougat
57 . Chrome Antique Brass Nougat
122 . Chrome Black Nougat
52 . Chrome Blue Nougat
64 . Chrome Green Nougat
82 . Chrome Pink Nougat
83 . Pearl White Nougat
119 . Pearl Very Light Gray Nougat
66 . Pearl Light Gray Nougat
95 . Flat Silver Nougat
77 . Pearl Dark Gray Nougat
61 . Pearl Light Gold Nougat
115 . Pearl Gold Nougat
81 . Flat Dark Gold Nougat
84 . Copper Nougat
78 . Metal Blue Nougat
223 . Satin Trans-Light Blue Nougat
224 . Satin Trans-Dark Pink Nougat
67 . Metallic Silver Nougat
70 . Metallic Green Nougat
65 . Metallic Gold Nougat
60 . Milky White Nougat
159 . Glow In Dark White Nougat
46 . Glow In Dark Opaque Nougat
118 . Glow In Dark Trans Nougat
101 . Glitter Trans-Clear Nougat
222 . Glitter Trans-Orange Nougat
163 . Glitter Trans-Neon Green Nougat
162 . Glitter Trans-Light Blue Nougat
102 . Glitter Trans-Purple Nougat
100 . Glitter Trans-Dark Pink Nougat
111 . Speckle Black-Silver Nougat
151 . Speckle Black-Gold Nougat
116 . Speckle Black-Copper Nougat
117 . Speckle DBGray-Silver Nougat
|
|
| Author: | Graham. | | Posted: | Feb 3, 2020 08:43 | | Subject: | Dark red | | Viewed: | 161 times | | Topic: | Colors | | Status: | Open | |
|
| Please list “Dark Red” and “New Dark Red” separate.
LEGO note them as different. They are very different and mixed up in one build
don’t look good.
Thanks
|
| Author: | legoman77 | | Posted: | Feb 2, 2020 19:14 | | Subject: | An epiphany | | Viewed: | 266 times | | Topic: | Colors | | Status: | Open | |
|
| I just had a brilliant idea. Let's change Nougat to Flesh.
John P
|
| Author: | pcthurman | | Posted: | Feb 2, 2020 17:34 | | Subject: | Inventory Change Request for Set 6545-1 | | Viewed: | 31 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 30086 Yellow Boat, Rubber Raft, Small
Comments from Submitter:
As seen on the front cover of the instruction booklet.
|
|
| Author: | L.tide | | Posted: | Feb 2, 2020 17:08 | | Subject: | Inventory Change Request for Set 10715-1 | | Viewed: | 35 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 4073 Black Plate, Round 1 x 1 (Extra)
* Add 1 Part 4599b Black Tap 1 x 1 without Hole in Nozzle End (Extra)
* Add 1 Part 4073 Blue Plate, Round 1 x 1 (Extra)
* Add 1 Part 54200 Bright Pink Slope 30 1 x 1 x 2/3 (Extra)
* Add 1 Part 24866 Dark Pink Plate, Round 1 x 1 with Flower Edge (5 Petals) (Extra)
* Add 1 Part 54200 Reddish Brown Slope 30 1 x 1 x 2/3 (Extra)
* Add 1 Part 4073 Trans-Clear Plate, Round 1 x 1 (Extra)
* Add 1 Part 4073 Trans-Green Plate, Round 1 x 1 (Extra)
* Add 1 Part 4073 Trans-Red Plate, Round 1 x 1 (Extra)
* Add 1 Part 98138pb027 White Tile, Round 1 x 1 with Black Eye with Pupil Partially Closed Pattern (Extra)
* Add 1 Part 98138pb007 White Tile, Round 1 x 1 with Black Eye with Pupil Pattern (Extra)
* Add 10 Part 34337 White Wheel 8mm D. x 6mm with Slot (Alternate) (match ID 1)
Comments from Submitter:
54200 Trans-Clear without extra piece in EU copies, at least mine ones.
|
|
| Author: | Broodyfour | | Posted: | Feb 2, 2020 13:59 | | Subject: | Inventory Change Request for Set 75149-1 | | Viewed: | 35 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change {1 to 5} Part White 3062b Brick, Round 1 x 1 Open Stud
Comments from Submitter:
The parts list shows this a having only one White Brick, Round 1 x 1 Open Stud when actually there needs to be 5 to assemble this set.
|
|
| Author: | yapke | | Posted: | Feb 2, 2020 10:51 | | Subject: | Feature which shows if BL member is active | | Viewed: | 101 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Hello,
I was wondering if a feature or timer, to see whether a BrickLink
member is active or has been active (like on FB messenger or WhatsApp), would
be a great idea.
The reason why I'm wondering:
I'm sure there are members who logs in daily to see if another
member has reacted to their order('s invoice)/message, and are nervously
waiting until he/she/they react(s).
It will also be handy to see if a member (who placed an order on your store)
is active on BL and isn't responding to your multiple messages (or just ignoring),
and easier to decide to cancel an order.
For example (my example):
There is a member (USA) who has placed an order on my store (Belgium) a few days
ago. I instantly filled in and sent the invoice to serve him and be able to send
the parcel (after payment) as quickly as possible. But until now, two days later,
he hasn't read the message nor has paid for the order. Now I'm just wondering
if he was active or not lately... cause the hole situation is making me nervous.
I know I should be patient... but I find it kind of weird he responded very quickly
to my last call for buying, and afterwards not responding anymore.
So if you recognize yourself in such a situation, maybe vote 'YES' and
perhaps selling on BL will be more pleasant and more serious. I'm sure there
is a lot of members thinking this way, isn't it?
Kindly greetings,
Yapke
|
|
| Author: | StarBrick | | Posted: | Feb 2, 2020 10:46 | | Subject: | flesh2nougat: BrickStock affected? | | Viewed: | 117 times | | Topic: | Colors | | Status: | Open | |
|
| When changes like flesh2nougat are made, what are the effects on the usage of
BrickStock for uploading, parting etc?
Any thoughts?
|
|
| Author: | Emporiosa | | Posted: | Feb 2, 2020 10:26 | | Subject: | Special Assemblies | | Viewed: | 81 times | | Topic: | Inventories | | Status: | Open | |
|
| I was wondering if something had changed in regards to special assemblies, as
I was under the impression that it was a trial run and was decided that they
wouldn't continue to be added to the catalogue. Although, I noticed that
a Lion Dance assembly was recently added, so are we good to go to keep submitting
special assemblies? And do we have a solid definition of what a special assembly
must be? For example, could a train car be an assembly (this is one that comes
to mind as they're often sold as an "incomplete" set under the train sets)?
I've seen all kinds of assemblies so far such as a tree (Whomping WIllow),
a vehicle (the HP Ford Anglia), figure builds (Giant-Man), etc... It seems like
anything that could be popular to purchase/sell separately is valid, but I'm
just wanting to be sure before I go ahead and start contributing special assemblies
(as I'm a big fan of them! ). Thank-you!
-Sarah
|
|
| Author: | tpr | | Posted: | Feb 2, 2020 07:48 | | Subject: | PUT COLOURS BACK & DISCUSS WITH LEGO | | Viewed: | 202 times | | Topic: | Catalog | | Status: | Open | |
|
| Hi
For now as we have more changes in discussion, can't we put the colours back
to how they were. I'm sure a few more days/weeks of flesh isn't going
to hurt us.
Then discuss with the Lego Company regarding changing all colours to their colours
- we are part of their group. What they say will be correct !!
tpr
|
| Author: | WFMTF | | Posted: | Feb 2, 2020 05:13 | | Subject: | Color Names | | Viewed: | 91 times | | Topic: | Colors | | Status: | Open | |
|
| Please inform, why shops are not informed about color name changes?
This is more than annoying.
Waiting your answer
Waltraud
|
| Author: | axaday | | Posted: | Feb 1, 2020 19:10 | | Subject: | Anyone Know the Color on fab5e Head? | | Viewed: | 81 times | | Topic: | Colors | | Status: | Open | |
|
| I pulled from my collection to use as a potential color reference.
Does anyone have a certain ID on the color of his head?
|
|
| Author: | Admin_Russell | | Posted: | Feb 1, 2020 18:41 | | Subject: | Nougat is the new Flesh | | Viewed: | 1190 times | | Topic: | Colors | | Status: | Open | |
|
|
BrickLink
ID CardAdmin_Russell
|
Location:  USA, California |
| Member Since |
Contact |
Type |
Status |
| May 9, 2017 |
 |
Admin |
|
|
| BrickLink Administrator |
|
| For those who may have missed this recent change, we have decided to change the
name "Flesh" to another color name in the BrickLink catalog. I'm not going
to get into the reasons why this was done - the purpose here is to inform you
of what the changes were and how they may affect your BrickLink user experience.
The changes are 5 in number:
1. Light Flesh becomes Light Nougat
2. Flesh becomes Nougat
3. Medium Dark Flesh becomes Medium Nougat
4. Dark Flesh becomes Medium Brown
5. Dark Nougat is added to the BrickLink catalog, which is currently included
with BrickLink's Earth Orange.
Changes to the color names in Item Names are forthcoming. No changes to inventories
are necessary except to give Dark Nougat a place in the system.
How this may effect you:
1. If you rely on any of BrickLink's list pages that can be sorted by color
(set inventory, catalog search, catalog item detail page, etc.) some items may
be listed in a different order.
2. If you have your physical parts inventory sorted by color, you may need to
relabel. Dark Flesh is relatively rare, but if you have it, you will need to
change the labels to Medium Brown. That's the tough one, although renaming
it to a type of brown is a big step in the right direction.
3. If you perchance have the type of Earth Orange from the early 2000's,
you should separate out these parts and relist them under Dark Nougat. This color
is retired and quite rare.
Thanks to our BrickLink color enthusiasts for their input. They've given
invaluable advice over the years and we're happy they were willing to give
some advice this time around as well.
|
|
| Author: | runner.caller | | Posted: | Feb 1, 2020 11:16 | | Subject: | Congrats on the PC "win" | | Viewed: | 177 times | | Topic: | Colors | | Status: | Open | |
|
| Also, changing the color name to NOUGAT isn't going to change the
physical color.
If group A feels strongly that it should be changed, and group B feels strongly
that it shouldn't, why did group A automatically get the change implemented?
Seeing as the vast majority of parts in the light flesh color are used for heads
from licensed themes portraying a character, actress, or actor with light flesh
skin tone, I fail to see the problem.
Obviously in real life, skin tones are a set of continuous data instead of discrete,
but one of the trade-offs of creating the licensed characters out of plastic
at a feasible cost is to standardize skin tones into a few discrete values and
apply a 'best fit' method to the continuous data.
Also, thanks for adding the extra key stroke by making a 5 letter color into
a 6 letter color. Can't wait to type 'NOUGAT' a bunch of times. PEACH
would have been better...
|
|
| Author: | Give.Me.A.Brick | | Posted: | Feb 1, 2020 07:14 | | Subject: | Inventory Change Request for Set 41999-1 | | Viewed: | 32 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part x77c Black String, Cord Medium Thickness (Undetermined Length)
* Add 1 Part x77cc100 Black String, Cord Medium Thickness 100cm
Comments from Submitter:
From a MISB set. Will take photo if needed.
|
|
| Author: | StormChaser | | Posted: | Jan 31, 2020 06:12 | | Subject: | Inventory Change Request for Set 320-1 | | Viewed: | 32 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 4130 Yellow Door Frame 2 x 4 x 5
* Delete 2 Part 4132 Yellow Window 2 x 4 x 3 Frame
* Delete 2 Part 4133 Red Window 2 x 4 x 3 Pane
* Delete 1 Part 4131 Red Door 1 x 4 x 5
* Delete 2 Part 4180c02 Black Brick, Modified 2 x 4 with Wheels, FreeStyle Red Wheels and Pins
* Delete 4 Part 3483 Black Tire 24mm D. x 8mm Offset Tread
* Change 2 Part Black 4180c02assy1 Brick, Modified 2 x 4 with Wheels, FreeStyle Red with Black Tires 24mm D. x 8mm Offset Tread (4180c02 / 3483) {Counterpart to Regular}
* Change 1 Part Yellow 4130c01 Door Frame 2 x 4 x 5 with Red Door 1 x 4 x 5 (4130 / 4131) {Counterpart to Regular}
* Change 2 Part Yellow 4132c01 Window 2 x 4 x 3 Frame with Red Window 2 x 4 x 3 Pane (4132 / 4133) {Counterpart to Regular}
|
|
| Author: | StormChaser | | Posted: | Jan 31, 2020 06:00 | | Subject: | Inventory Change Request for Set 1637-1 | | Viewed: | 20 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 4 Part 4180c02 Black Brick, Modified 2 x 4 with Wheels, FreeStyle Red Wheels and Pins
* Delete 8 Part 2346 Black Tire 30 x 10.5 Offset Tread
* Delete 3 Part 4130 Red Door Frame 2 x 4 x 5
* Delete 4 Part 4132 Red Window 2 x 4 x 3 Frame
* Delete 3 Part 4131 White Door 1 x 4 x 5
* Delete 4 Part 4133 White Window 2 x 4 x 3 Pane
* Add 3 Part 4130c02 Red Door Frame 2 x 4 x 5 with White Door 1 x 4 x 5 (4130 / 4131)
* Add 4 Part 4132c04 Red Window 2 x 4 x 3 Frame with White Window 2 x 4 x 3 Pane (4132 / 4133)
* Add 4 Part 4180c02assy1 Black Brick, Modified 2 x 4 with Wheels, FreeStyle Red with Black Tires 24mm D. x 8mm Offset Tread (4180c02 / 3483)
|
|
| Author: | anathema | | Posted: | Jan 30, 2020 14:04 | | Subject: | Inventory Change Request for Set 6687-1 | | Viewed: | 26 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Black {3003 Brick 2 x 2 to 3003old Brick 2 x 2 without Inside Supports}
* Change 1 Part Red {3002 Brick 2 x 3 to 3002old Brick 2 x 3 without Cross Supports}
* Change {2 to 1} Part Trans-Clear {4073 Plate, Round 1 x 1 to 4073c01 Plate, Round 1 x 1, 2 on Sprue}
* Change 1 Part Trans-Green {4073 Plate, Round 1 x 1 to 4073c01 Plate, Round 1 x 1, 2 on Sprue}
* Change {3 to 2} Part Trans-Red {4073 Plate, Round 1 x 1 to 4073c01 Plate, Round 1 x 1, 2 on Sprue}
Comments from Submitter:
Source: MISB set
|
|
| Author: | anathema | | Posted: | Jan 30, 2020 13:58 | | Subject: | Inventory Change Request for Set 316-1 | | Viewed: | 42 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 5 Part 3680c01 White Turntable 2 x 2 Plate, Base with Light Gray Turntable 2 x 2 Plate, Top (3680 / 3679) (Alternate) (match ID 99)
* Change 4 Part White 3680c01 Turntable 2 x 2 Plate, Base with Light Gray Turntable 2 x 2 Plate, Top (3680 / 3679) {match ID 0 to 99}
Comments from Submitter:
The set was redesigned slightly to add an extra turntable at the base of the mast. The change is shown on a supplemental instruction sheet.
|
|
| Author: | Gp8871 | | Posted: | Jan 30, 2020 10:17 | | Subject: | Inventory Change Request for Set 75095-1 | | Viewed: | 37 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 90498 Black Tile 8 x 16 with Bottom Tubes (Counterpart)
Comments from Submitter:
It should exist a counterpart of this part, with the UCS TIE/Ln Starfighter description sticker on.
|
|
| Author: | AZbrickGUY | | Posted: | Jan 29, 2020 20:17 | | Subject: | Disney Princess Cogsworth and Lumiere sets. | | Viewed: | 83 times | | Topic: | Catalog | | Status: | Open | |
|
| Hello. Trying to find info on these two sets.
Disney Princess Cogsworth. 47pcs
Disney Princess Lumiere. 23pcs.
Cant find them anywhere. TRU build so there isn't a set number. Link? Thanks
for the help.
|
|
| Author: | mattkaupke | | Posted: | Jan 29, 2020 14:05 | | Subject: | Brickarms inventory | | Viewed: | 166 times | | Topic: | Catalog | | Status: | Open | |
|
| I had a crazy week last week and didn't get a chance to manually pull my
Brickarms inventory before Lego kicked it off the site. I was hoping it would
be somewhere that I can still see what I had in my inventory. Does anyone know
if this is possible? Otherwise, I have absolutely no way to find them in my shelves
without access to the old listing details. Am I just going to have to stumble
across them over time as I pull other orders and see them? I was hoping they
would go into stockroom with no option to relist or something like that, not
just completely disappear. I should have screenshotted it so I had a record of
my previous inventory and its location, but didn't get a chance to between
when I saw the notice and when they pulled the listings.
|
|
| Author: | Marmi58 | | Posted: | Jan 29, 2020 13:12 | | Subject: | 1880 set | | Viewed: | 101 times | | Topic: | Catalog | | Status: | Open | |
|
| in your list of item for the 1880 set, you mention 3 of the green plant flower
stem (3741), but to complete the set you need 4.
Also, you listed 4 green window 1X2X3 shutter, which is the case, but on the
original list of pieces, there is 8 listed, I don't know why.
have a nice day
|
|
| Author: | Erikmax | | Posted: | Jan 29, 2020 09:16 | | Subject: | Address fields require clear labels | | Viewed: | 87 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| From 1/1-2020 it is no longer possible to ship goods internationally in a letter
by PostNL. There has been a lot about this in this forum.
Professional dealers can still ship at a special rate using the online system.
But this online system requires filling in fields ´very strictly´ so street,
number, extra number, region, city, postcode.
We used to copypaste BL adresses, annd expected the local post to make the right
interpretation. But this is no longer possible.
Especially Asian adresses (S.Korea,Taiwan,Japan, China, Hong Kong) now gives
some questions, because it is not allways clear ´what is what´. Japanese addresses
come in the opposite order, sometimes there is as name or number, appartment
names and numbers that can be mixed up with a streetname, and there is the problem
that numbers come before streetnames on the label- streetnumbers are printed
AFTER the streetname. In many adresses it looks that things are mentioned twice,
but possible name of city and region are the same.
More postal administrations will adopt this new system thatis required by UPU,
(countries like USA will no longer accept and may even destroy shipments without
'prior notice of content', that's what postNL tells us) so this problem
would grow in the future.
In fact this requires a new way to display adresses ( "WITH LABEL") on brickink
to avoid `wrong` or incomplete adresses to be used.
Even more important because the lines on this label is limited and unneccesary
information pushes out important information from the line.
|
|
| Author: | ZwarteMagica | | Posted: | Jan 29, 2020 09:03 | | Subject: | Inventory Change Request for Set 4484-1 | | Viewed: | 33 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Black 2609b Magnet Holder Tile 2 x 2 - Tall Arms with Deep Notch {Regular to Extra}
* Change 2 Part Light Gray 4032 Plate, Round 2 x 2 with Axle Hole {Regular to Extra}
Comments from Submitter:
Since the 4871, 4854 and 6636 are extra items, I assume those parts also need to be listed as extra`s. Since they are also exclusive used in the cross over model.
|
|
| Author: | Scrp749 | | Posted: | Jan 28, 2020 21:04 | | Subject: | Set 42105 Sails Misprint? | | Viewed: | 94 times | | Topic: | Inventories | | Status: | Open | |
|
| Hi,
I'm in the middle of doing the inventory for set 42105 Catamaran. The sails
and instructions front page both contain the word "Bouy", but this is a misspelling
in American English (should be "Buoy"). I don't know if this is an outright
misspelling in any language.
Just figured I'd point this out in case someone questions it later. Sails
are currently pending catalog approval.
[p=66645c01]
Regards, - Chris
|
|
| Author: | Antarctica | | Posted: | Jan 28, 2020 15:59 | | Subject: | Inventory Change Request for Set 1237-1 | | Viewed: | 28 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 4 Part Black {3704 Technic, Axle 2 to 32062 Technic, Axle 2 Notched}
Comments from Submitter:
The notches are visible in the instructions scan at https://lego.fandom.com/wiki/1237_Asimo_Robot?file=1237B.jpg in the left bottom.
The mold change was in 1996/1997, this is the only later set that has 3704 in its inventory.
|
|
| Author: | infinibrix | | Posted: | Jan 28, 2020 14:31 | | Subject: | Lego AMA Should we +1 questions? | | Viewed: | 156 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| With regards to the below part of the announcement Lego says they will update
the FAQ with our ‘MOST’ top-of-mind questions does that mean those questions
that get asked the most will more likely get answered? and in which case if I
have the same question as what someone else has already asked should I just +1
it or would that cause more confusion?
I would assume that all the main questions will remain on the far left and easy
for Lego to spot in fact any staggered +1’s underneath it should actually indicate
to Lego that several people are showing an interest in the same question but
at the same time I don’t know if it’s a good idea or not? Only repeating the
same questions again would seem even more confusing? Any thoughts?
“Please do add your questions in the thread below*. We will update the LEGO FAQ
on an ongoing basis with your most top-of-mind questions, until the closing of
the AMA on 31st January 2020 at 9AM EST.”
|
|
| Author: | bb1592198 | | Posted: | Jan 27, 2020 18:28 | | Subject: | Piece 33492 | | Viewed: | 66 times | | Topic: | Catalog | | Status: | Open | |
|
| | I can't seem to find piece 33492. |
| Author: | paulvdb | | Posted: | Jan 27, 2020 04:05 | | Subject: | Inventory Change Request for Set 60258-1 | | Viewed: | 34 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 44302a Dark Bluish Gray Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove (Alternate) (match ID 1)
* Change 1 Part Dark Bluish Gray 44302b Hinge Plate 1 x 2 Locking with 2 Fingers on End without Bottom Groove {match ID 0 to 1}
Comments from Submitter:
My set has 44302a
|
|
|
| Author: | superca | | Posted: | Jan 26, 2020 20:48 | | Subject: | Inventory Change Request for Set 8108-1 | | Viewed: | 23 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 47757pb15 Black Wedge 4 x 4 Pyramid Center with Yellow Circle and Silver Robot Head Facing Back Pattern (Sticker) - Set 8105 (Counterpart)
Comments from Submitter:
This decorated wedge is missing from the inventory and is shown in the instructions (page 31 of book 2) to this set plus the sticker is part of this sets sticker sheet.
|
|
| Author: | StormChaser | | Posted: | Jan 26, 2020 03:06 | | Subject: | Inventory Change Request for Set 1676-1 | | Viewed: | 40 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 4130 Red Door Frame 2 x 4 x 5
* Delete 1 Part 4132 Red Window 2 x 4 x 3 Frame
* Delete 1 Part 4131 White Door 1 x 4 x 5
* Delete 1 Part 4133 White Window 2 x 4 x 3 Pane
* Add 1 Part 4130c02 Red Door Frame 2 x 4 x 5 with White Door 1 x 4 x 5 (4130 / 4131)
* Add 1 Part 4132c04 Red Window 2 x 4 x 3 Frame with White Window 2 x 4 x 3 Pane (4132 / 4133)
|
|
| Author: | CALBrickLAB | | Posted: | Jan 25, 2020 20:21 | | Subject: | USPS postage zones | | Viewed: | 148 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| As I go through updating my postage for the USPS rate increase in effect on Monday,
I'm reminded that we still don't have the ability to use zone pricing
based on zip codes for shipping. We all use the same zone groupings, so we would
just need a chart set up like we do for international shipping, but with the
9 zone fields. I end up overcharging and giving refunds if the amount is excessive.
Thanks,
Romy
|
|
| Author: | SurplusParts | | Posted: | Jan 25, 2020 19:39 | | Subject: | Inventory Change Request for Set 10243-1 | | Viewed: | 34 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 7 Part 15712 White Tile, Modified 1 x 1 with Clip - Rounded Edges (Alternate)
* Add 4 Part 44567a Light Bluish Gray Hinge Plate 1 x 2 Locking with 1 Finger on Side with Bottom Groove (Alternate)
Comments from Submitter:
These 2 alternate parts were found in 2 sealed sets.
|
|
| Author: | WilliamRaine | | Posted: | Jan 25, 2020 19:07 | | Subject: | Inventory Change Request for Set 9463-1 | | Viewed: | 25 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 3 Part 3794 Dark Red Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) (match ID 2)
* Delete 1 Part 3794 Light Bluish Gray Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) (match ID 3)
* Add 1 Part 3794a Light Bluish Gray Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper) (match ID 3)
* Change 3 Part Dark Red 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) {Alternate to Regular}
Comments from Submitter:
Source: Sealed Set Contents, cleaning up undetermined types.
|
|
| Author: | WilliamRaine | | Posted: | Jan 25, 2020 18:57 | | Subject: | Inventory Change Request for Set 4183-1 | | Viewed: | 19 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 8 Part 2453 Dark Bluish Gray Brick 1 x 1 x 5 - Undetermined Stud Type (match ID 1)
* Add 8 Part 2453a Dark Bluish Gray Brick 1 x 1 x 5 - Blocked Open Stud or Hollow Stud (match ID 1)
* Delete 2 Part 3794 Reddish Brown Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) (match ID 2)
* Add 2 Part 3794a Reddish Brown Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper) (match ID 2)
Comments from Submitter:
Source: Sealed Set Contents, cleaning up undetermined types
|
|
| Author: | WilliamRaine | | Posted: | Jan 25, 2020 18:23 | | Subject: | Inventory Change Request for Set 4181-1 | | Viewed: | 37 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 2 Part 3684 Dark Bluish Gray Slope 75 2 x 2 x 3 - Undetermined Stud Type (match ID 6)
* Add 2 Part 3684a Dark Bluish Gray Slope 75 2 x 2 x 3 - Hollow Studs (match ID 6)
* Delete 2 Part 3794 Pearl Gold Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) (match ID 5)
* Add 2 Part 3794a Pearl Gold Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper) (match ID 5)
* Add 1 Part 3626cpb0558 Light Flesh Minifigure, Head PotC Hector Barbossa Ragged Brown Beard Pattern - Hollow Stud (Alternate)
Comments from Submitter:
Source: Sealed Set Contents, fixing up undetermined parts
|
|
| Author: | tomaso | | Posted: | Jan 25, 2020 14:34 | | Subject: | miss 64391+sticker | | Viewed: | 44 times | | Topic: | Catalog | | Status: | Open | |
|
| hello i would like to insert some part lego, but they doesn't for example
64683+sticker( set 42058) set 60122 : 52031 lime +sticker.
how should I do?
|
| Author: | MocFodder | | Posted: | Jan 25, 2020 10:54 | | Subject: | Inventory Change Request for Set 75022-1 | | Viewed: | 27 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 64802 Dark Bluish Gray Minifigure, Jet Pack with Nozzles
Comments from Submitter:
The deathwatch command have them as per the instructions.
|
|
| Author: | Turez | | Posted: | Jan 25, 2020 10:18 | | Subject: | Inventory Change Request for Set 7038-1 | | Viewed: | 26 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 4495a Dark Blue Flag 4 x 1 Wave Left (match ID 3)
* Add 1 Part 4495b Pearl Gold Flag 4 x 1 Wave Right (Alternate) (match ID 4)
* Change 1 Part Dark Blue 4495b Flag 4 x 1 Wave Right {Regular to Alternate} {match ID 0 to 3}
* Change 1 Part Pearl Gold 4495a Flag 4 x 1 Wave Left {match ID 0 to 4}
Comments from Submitter:
Unboxing and building at http://www.brickshelf.com/cgi-bin/gallery.cgi?f=304273 and at http://www.brickshelf.com/cgi-bin/gallery.cgi?f=315253
|
|
| Author: | saosivert | | Posted: | Jan 25, 2020 05:05 | | Subject: | Inventory Change Request for Set 70602-1 | | Viewed: | 28 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part {Trans-Light Blue to Trans-Dark Blue} 57906pb014 Hinge Plate 3 x 12 with Angled Side Extensions and Tapered Ends with Lightning Pattern Type 1 (Sticker) - Set 70602 (Counterpart)
Comments from Submitter:
Part is Trans-Dark Blue instead of Trans-Light Blue
|
|
| Author: | StormChaser | | Posted: | Jan 25, 2020 03:31 | | Subject: | Inventory Change Request for Set 70731-1 | | Viewed: | 36 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Minifig njo184s Jay (Deepstone Armor) - Possession, Lightning Pack with Yellow Danger Stripes and Gold Lightning Reactor Pattern (Sticker) (Counterpart)
|
|
| Author: | StormChaser | | Posted: | Jan 24, 2020 13:06 | | Subject: | Have A Heart | | Viewed: | 276 times | | Topic: | Catalog | | Status: | Open | |
|
| I can't help myself from returning to this topic.
It is not right to erase people who have contributed to the catalog and turn
them into a meaningless number (and a username that rhymes with "loser.").
The first attached image shows people who have contributed a set inventory to
the catalog. For each person it was only one inventory, but it was time they
took out of their day or week to make a contribution.
The second image shows people who have added items to the catalog. One person
added 113 items. Another added 97 items. Yet another added 87 items. And so
on down the list.
Some of these unregistered users are no doubt dead. Some have moved on to new
pursuits. Some may be in a coma or in prison. Who knows why any one person
hasn't logged on or may never log on again?
BrickLink wants contributions. BrickLink wants an involved community. But when
BrickLink treats former contributors so dismissively, by erasing them into meaninglessness,
it makes me think they have no respect for contributors.
BrickLink contributors deserve better treatment than this. Anonymizing people
who have contributed to the catalog was a poor decision. It was a careless and
heartless decision.
I urge the site to reconsider the decision to anonymize any former catalog and
inventory contributors.
|
|
|
| Author: | minithings4life | | Posted: | Jan 24, 2020 09:47 | | Subject: | Inventory Change Request for Minifig pln155s | | Viewed: | 30 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* | | pln155s (Inv) Plain White Torso with Vestas Logo (Sticker) with White Arms, Dark Blue Legs, Red Construction Helmet, Glasses
Minifigures: Town: City |
* Change 1 Part {Blue to Dark Blue} 970c00 Hips and Legs
Comments from Submitter:
legs should be dark blue not blue, have checked a sealed set.
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
France, Grand Est
Canada, British Columbia
Switzerland, Vaud
United Kingdom, England
Hungary, Budapest
Netherlands, Overijssel
United Kingdom, Wales
Slovakia, Žilinský Kraj
Germany, Nordrhein-Westfalen
Russia, Tatarstan
Poland, w. Wielkopolskie
Australia, Victoria
)
)
Belgium, Flemish Brabant
Austria, Burgenland
Portugal
Norway, Rogaland
Italy, Veneto
)
)
