Discussion Forum: Messages by paulvdb (7148)
Redisplay Messages: Compact | Brief | All | Full      Show Messages: All | Without Replies

 Author: paulvdb View Messages Posted By paulvdb
 Posted: Feb 4, 2020 15:17
 Subject: Re: I'm back!
 Viewed: 61 times
 Topic: Inventories
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories, randyf writes:
  Just a quick note to let everyone know that I am back in the saddle for BrickLink!
I will begin by hammering on the backlog of pending inventories later today.
If you have been waiting for these inventories to part out, please have a bit
more patience as I work through these since there are a significant amount to
catch up on.

Cheers,
Randy

I'm also back. I won't really be starting just yet. Need to get some
sleep but will work on the backlog of pending inventories tomorrow.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Jan 27, 2020 04:05
 Subject: Inventory Change Request for Set 60258-1
 Viewed: 34 times
 Topic: Inventories Requests (Entry)
 Status:Open
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
Please make changes to the following inventory:
 
Set No: 60258  Name: Tuning Workshop
* 
60258-1 (Inv) Tuning Workshop
869 Parts, 7 Minifigures, 2020
Sets: Town: City: Race

* Add 1 Part 44302a Dark Bluish Gray Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove (Alternate) (match ID 1)
* Change 1 Part Dark Bluish Gray 44302b Hinge Plate 1 x 2 Locking with 2 Fingers on End without Bottom Groove {match ID 0 to 1}

Comments from Submitter:
My set has 44302a
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Jan 19, 2020 03:03
 Subject: Re: 7662 MTT Reddish-Brown 4460a Slope
 Viewed: 42 times
 Topic: Catalog
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Catalog, M.Boss writes:
  Hi,
I recently purchased a used 7662 MTT set. Instead of the 4460a reddish-brown
slopes listed in the BrickLink inventory, it came 4460b slope. I also noticed
the set listed 4460b slopes in DBG as a counterpart. I know it is a longshot,
but could someone who purchased this set brand new check if their set's 4460
slope has hollow studs or open studs. Thank You!
 
Set No: 7662  Name: Trade Federation MTT
* 
7662-1 (Inv) Trade Federation MTT
1191 Parts, 21 Minifigures, 2007
Sets: Star Wars: Star Wars Episode 1
 
Part No: 4460a  Name: Slope 75 2 x 1 x 3 - Open Stud
* 
4460a Slope 75 2 x 1 x 3 - Open Stud
Parts: Slope
 
Part No: 4460b  Name: Slope 75 2 x 1 x 3 - Hollow Stud
* 
4460b Slope 75 2 x 1 x 3 - Hollow Stud
Parts: Slope

Based on the year of release it is possible that 4460b was included in later
production runs of this set.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Jan 12, 2020 07:43
 Subject: Re: Inventory Change Request for Set 60020-1
 Viewed: 23 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, elias3 writes:
  Please make changes to the following inventory:
 
Set No: 60020  Name: Cargo Truck
* 
60020-1 (Inv) Cargo Truck
307 Parts, 3 Minifigures, 2013
Sets: Town: City: Cargo

* Delete 2 Part 3794 Red Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) (Alternate) (match ID 1)
* Change 2 Part Black {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (undetermined type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}
* Change 2 Part Black {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove}
* Change 4 Part Black {51011u Tire 17.5mm D. x 6mm with Shallow Staggered Treads - (Undetermined Version) to 92409 Tire 17.5mm D. x 6mm with Shallow Staggered Treads - Band Around Center of Tread}
* Change 4 Part Light Bluish Gray {42610c01 Wheel 11mm D. x 8mm with Center Groove with Black Tire 17.5 x 6 Shallow Staggered Treads (42610 / 51011u) to 42610c03 Wheel 11mm D. x 8mm with Center Groove with Black Tire 17.5mm D. x 6mm with Shallow Staggered Treads - Band Around Center of Tread (42610 / 92409)} {Counterpart to Regular}

Comments from Submitter:
source: part out sets and own collection

Another one where 3794 should not be deleted but changed to 3794a. First, 3794
was added as an alternate indicating that it was intended to be 3794a. And second,
this screenshot from a video review clearly shows 3794a.
 
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Jan 12, 2020 07:34
 Subject: Re: Inventory Change Request for Set 60025-1
 Viewed: 18 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, elias3 writes:
  Please make changes to the following inventory:
 
Set No: 60025  Name: Grand Prix Truck
* 
60025-1 (Inv) Grand Prix Truck
301 Parts, 3 Minifigures, 2013
Sets: Town: City: Race

* Delete 3 Part 3794b Red Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) (Alternate) (match ID 1)
* Change 2 Part Black {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (undetermined type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}
* Change 2 Part Black {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove}
* Change 5 Part Black {51011u Tire 17.5mm D. x 6mm with Shallow Staggered Treads - (Undetermined Version) to 92409 Tire 17.5mm D. x 6mm with Shallow Staggered Treads - Band Around Center of Tread}
* Change 3 Part Red {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper)}
* Change 5 Part Light Bluish Gray {42610c01 Wheel 11mm D. x 8mm with Center Groove with Black Tire 17.5 x 6 Shallow Staggered Treads (42610 / 51011u) to 42610c03 Wheel 11mm D. x 8mm with Center Groove with Black Tire 17.5mm D. x 6mm with Shallow Staggered Treads - Band Around Center of Tread (42610 / 92409)} (Counterpart)

Comments from Submitter:
source: part out sets and own collection

Part 3794 in red should not be removed from this set. It should be changed to
3794a because both variants were found in this set. Several video reviews of
the set show 3794a. Included a screenshot from one of them that clearly shows
it.
 
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Dec 29, 2019 00:07
 Subject: Re: Inventory Change Request for Set 8143-1
 Viewed: 30 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, StormChaser writes:
  In Inventories Requests, d66n writes:
  It is my opinion that this should be removed and would be interested to know if you agreed.

I do not agree. The set contents have been verified by three different members
since the extra part was added. All three verifications were done from sealed
set contents.

  I would not expect Lego to supply a spare technic part of such a size

What about this as a spare part?

 
Part No: 4282  Name: Plate 2 x 16
* 
4282 Plate 2 x 16
Parts: Plate

I found that as a spare in this set:

 
Set No: 60148  Name: ATV Race Team
* 
60148-1 (Inv) ATV Race Team
230 Parts, 2 Minifigures, 2017
Sets: Town: City: Off-Road

Removal of the extra 2 x 16 plate was attempted unsuccessfully:

https://www.bricklink.com/message.asp?ID=1061609

Although large extra parts are unusual, they do happen.

  I did not have this part as a spare in my sealed box

Extra parts vary by location. Sets packaged in one location may include them,
while sets packaged in another location may not include them. For that reason,
extras are rarely removed from inventories.

In the case of this set, I would not expect the request to be approved.

Larger parts are sometimes packed loose in the box especially when they appear
in smaller sets. In those cases an extra is often included.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Dec 28, 2019 05:55
 Subject: Re: Inventory Change Request for Set 6349-1
 Viewed: 14 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, maesehn writes:
  Please make changes to the following inventory:
 
Set No: 6349  Name: Vacation House
* 
6349-1 (Inv) Vacation House
193 Parts, 2 Minifigures, 1988
Sets: Town: Classic Town: Building

* Change 1 Part Yellow {4345 Container, Box 2 x 2 x 2 to 4345a Container, Box 2 x 2 x 2 - Solid Studs}

Comments from Submitter:
Looking at instructions and box shows that container box has solid studs and no mail pattern.

I confirmed this in the set in my personal collection. It was bought new sealed
and never mixed with parts from other sets.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Dec 16, 2019 14:48
 Subject: Re: Inventory Change Request for Set 70425-1
 Viewed: 26 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, ChooChoo_18 writes:
  Please make changes to the following inventory:
 
Set No: 70425  Name: Newbury Haunted High School
* 
70425-1 (Inv) Newbury Haunted High School
1440 Parts, 8 Minifigures, 2019
Sets: Hidden Side

* Delete 1 Part 2436b Black Bracket 1 x 2 - 1 x 4 with Rounded Corners
* Add 1 Part 2436c Black Bracket 1 x 2 - 1 x 4 with Two Rounded Corners at the Bottom

Comments from Submitter:
I'm parting out two copies of this set

The submitter of the inventory has checked and confirmed that the wrong variant
was inventoried.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Dec 14, 2019 09:03
 Subject: Re: Inventory Change Request for Set 2995-1
 Viewed: 24 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, normann1974 writes:
  Please make changes to the following inventory:
 
Set No: 2995  Name: Adventurers Car & Skeleton
* 
2995-1 (Inv) Adventurers Car & Skeleton
58 Parts, 2 Minifigures, 1998
Sets: Adventurers: Desert

* Change 1 Part Tan {3044 Slope 45 2 x 1 Double - (Undetermined Underside Version) to 3044b Slope 45 2 x 1 Double - with Inside Bar}

Comments from Submitter:
Source: I have only two tan 3044* in the collection of my own sets that have been mixed together and they are both 3044b and come from sets 5918 and this one. Feel free to reject this request if this proof is not enough.

We're not as strict with proof for older sets as we are with new sets. And
this is pretty convincing evidence that also fits the timeline for this part.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Dec 14, 2019 07:14
 Subject: Re: 3rd black 1x2 plate in set 4819
 Viewed: 34 times
 Topic: Catalog
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Catalog, StormChaser writes:
  In Catalog, hpoort writes:
  It is most likely a spare for if the horse is to graze in the field, replacing
the Reddish Brown 1x4.

Agree. If my memory is correct, the part in sets with horses usually would have
been a 1 x 2 tile, not a plate . . . but we all know how absolutely unreliable
memories are. By the way, the Peeron inventory for this set shows the 3rd plate
and that inventory was verified twice from sealed contents.

They were plates in my memory, but maybe there were tiles in some sets. Generally
a 1x2 brick and plate for horses with saddles. But in this set of course only
a plate would be necessary.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Dec 14, 2019 02:28
 Subject: Re: Inventory Change Request for Set 6918-1
 Viewed: 26 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, normann1974 writes:
  Please make changes to the following inventory:
 
Set No: 6918  Name: Blacksmith Attack
* 
6918-1 (Inv) Blacksmith Attack
95 Parts, 2 Minifigures, 2011
Sets: Castle: Kingdoms

* Add 1 Part 3626cpx302 Yellow Minifigure, Head Male Angry Eyebrows and Scowl, White Pupils Pattern - Hollow Stud (Alternate) (match ID 2)

Comments from Submitter:
Is this now the right way of putting alternate heads on minifigs? I thought notes were written on the minifigs inventory instead. Anyway, I'm doing it like this because there already is another alternate in the inventory for the other head. Source: Set from my own collection that was never mixed with other bricks.

Usually we only add a note to the minisifure inventory to indicate that it can
be found with both types of heads. But sometimes a head is not in any (minifigure)
inventories which means that it won't show any known colors in the head's
catalog entry. In such a case we'll add the head as an alternate to the set
inventory so that it will show a known color. This head is already in several
other inventories, so in this case we will only add a note to the minifigure
inventory.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Dec 12, 2019 09:31
 Subject: Re: Red eyebrows for cty0164
 Viewed: 35 times
 Topic: Catalog
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Catalog, bje writes:
  In Catalog, normann1974 writes:
  I have found
 
Minifig No: cty0164  Name: Fire - Reflective Stripes, Black Legs, White Fire Helmet, Glasses and Brown Thin Eyebrows
* 
cty0164 (Inv) Fire - Reflective Stripes, Black Legs, White Fire Helmet, Glasses and Brown Thin Eyebrows
Minifigures: Town: City: Fire
from
 
Set No: 7206  Name: Fire Helicopter
* 
7206-1 (Inv) Fire Helicopter
326 Parts, 3 Minifigures, 2010
Sets: Town: City: Fire
with red eyebrows. Should I change the
minifig or create a new minifigure with red eyebrows? It's possible that
this set and minifig never came with brown eyebrows. The set was inventoried
before the red eyebrow version was identified (by me) a couple of years ago.
Please advise.

/Jan

Red eyebrows on mine. My set, hoever, not sealed any longer as it has partly
been parted out. Minifigure is complete and very definitely red eyebrows.

Add a new minifigure and make it an alternate perhaps. The head on mine is
 
Part No: 3626bpb0122b  Name: Minifigure, Head Glasses Rectangular, Red Thin Eyebrows, Smile Pattern - Blocked Open Stud
* 
3626bpb0122b Minifigure, Head Glasses Rectangular, Red Thin Eyebrows, Smile Pattern - Blocked Open Stud
Parts: Minifigure, Head {Yellow}

Same head on mine (red eyebrows, blocked open stud).
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Dec 11, 2019 07:47
 Subject: Re: Parts Category Tree
 Viewed: 38 times
 Topic: Catalog
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Catalog, yorbrick writes:
  In Catalog, paulvdb writes:
  In Catalog, yorbrick writes:
  the names for torsos are often useless.

So you don't know what I'm talking about when I say Mini Upper Part,
No. 4420? It's obviously the one that comes after Mini Upper Part, No. 4419
and before Mini Upper Part, No. 4421.

Yep, torsos are fairly useless. However, some of the other parts have fairly
algorithmic names, if only LEGO was consistent (just like BL or any other site
trying to catalogue parts). Plus some of LEGO's names are quite funny.

Many of their names make it clear what a part is, especially once you become
a bit more familiar with their naming system. But for printed parts you get names
like those torsos I mentioned in my earlier post. Those are basically useless
if you're looking for a part with a specific print.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Dec 11, 2019 05:05
 Subject: Re: Parts Category Tree
 Viewed: 33 times
 Topic: Catalog
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Catalog, yorbrick writes:
  the names for torsos are often useless.

So you don't know what I'm talking about when I say Mini Upper Part,
No. 4420? It's obviously the one that comes after Mini Upper Part, No. 4419
and before Mini Upper Part, No. 4421.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Dec 8, 2019 04:17
 Subject: Re: Inventory Change Request for Set 42000-1
 Viewed: 24 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, LuGuLego writes:
  Please make changes to the following inventory:
 
Set No: 42000  Name: Grand Prix Racer
* 
42000-1 (Inv) Grand Prix Racer
1141 Parts, 2013
Sets: Technic: Model: Race

* Add 1 Part 64683pb042 White Technic, Panel Fairing # 3 Small Smooth Long, Side A with LEGO TECHNIC Logo and Red Stripe Pattern (Sticker) - Set 42000 (Counterpart)
* Add 1 Part 64392pb026 White Technic, Panel Fairing #17 Large Smooth, Side A with 'SMOOTH CURVES', Black, Red and Silver Stripes Pattern (Sticker) - Set 42000 (Counterpart)
* Add 1 Part 64392pb024 White Technic, Panel Fairing #17 Large Smooth, Side A with Black, Red and Silver Stripes Pattern (Sticker) - Set 42000 (Counterpart)
* Add 1 Part 64392pb027 White Technic, Panel Fairing #17 Large Smooth, Side A with Black, Red and Silver Stripes Pattern (Sticker) - Set 42000 (Counterpart)
* Add 1 Part 64392pb025 White Technic, Panel Fairing #17 Large Smooth, Side A with LEGO TECHNIC Logo Pattern (Sticker) - Set 42000 (Counterpart)
* Add 1 Part 64682pb026 White Technic, Panel Fairing #18 Large Smooth, Side B with 'SMOOTH CURVES', Black, Red and Silver Stripes Pattern (Sticker) - Set 42000 (Counterpart)
* Add 1 Part 64682pb024 White Technic, Panel Fairing #18 Large Smooth, Side B with Black, Red and Silver Stripes Pattern (Sticker) - Set 42000 (Counterpart)
* Add 1 Part 64682pb027 White Technic, Panel Fairing #18 Large Smooth, Side B with Black, Red and Silver Stripes Pattern (Sticker) - Set 42000 (Counterpart)
* Add 1 Part 64682pb025 White Technic, Panel Fairing #18 Large Smooth, Side B with LEGO TECHNIC Logo Pattern (Sticker) - Set 42000 (Counterpart)
* Add 1 Part 11946pb033 White Technic, Panel Fairing #21 Very Small Smooth, Side B with 'FUEL SPEED' Pattern (Sticker) - Set 42000 (Counterpart)
* Add 1 Part 11947pb033 White Technic, Panel Fairing #22 Very Small Smooth, Side A with 'FUEL SPEED' Pattern (Sticker) - Set 42000 (Counterpart)
* Add 2 Part 3069bpb751 White Tile 1 x 2 with Groove with Vehicle Mirror Black Border and Rounded Corners Pattern (Sticker) - Set 42000 (Counterpart)

Four of these parts should be red, not white. I changed them to red.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Dec 7, 2019 13:20
 Subject: Re: Inventory Change Request for Set 10243-1
 Viewed: 24 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, CanadaFirst writes:
  Please make changes to the following inventory:
 
Set No: 10243  Name: Parisian Restaurant
* 
10243-1 (Inv) Parisian Restaurant
2449 Parts, 5 Minifigures, 2014
Sets: Creator: Creator Expert: Modular Buildings Collection

* Delete 2 Part 33057 Dark Orange Turkey Drumstick, 20mm with Round Opening on Back
* Add 2 Part 42876 Dark Orange Turkey Drumstick, 22mm with Oval Opening on Back

Comments from Submitter:
Wrong part listed

Part 33057 was included in this set when it was first released. Did you find
42876 in a sealed set? In that case it can be added as an alternate.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Nov 30, 2019 02:32
 Subject: Re: Inventory Change Request for Set 8454-1
 Viewed: 19 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, Jessev writes:
  Please make changes to the following inventory:
 
Set No: 8454  Name: Rescue Truck
* 
8454-1 (Inv) Rescue Truck
634 Parts, 2003
Sets: Technic: Model: Fire

* Change {118 to 117} Part Black 2780 Technic, Pin with Friction Ridges Lengthwise WITH Center Slots
* Change {3 to 2} Part Light Gray 3713 Technic Bush
* Change {18 to 17} Part Light Gray 4265c Technic Bush 1/2 Smooth
* Change {5 to 4} Part Light Gray 3647 Technic, Gear 8 Tooth Type 1
* Change {8 to 7} Part Light Gray 4274 Technic, Pin 1/2

Comments from Submitter:
I built the set and the parts I used agree with the parts diagram from the side of the box. These 5 items called for 1 or 2 extra parts that happen to be included in the 'Extra Items' area

This will make quantities of these parts the same as in Brickset which gets its
data from lego replacement parts. It will also make the inventory a total of
634 parts which is listed on box images that I found.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Nov 17, 2019 01:44
 Subject: Re: Inventory Change Request for Set 3468-1
 Viewed: 25 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, randyf writes:
  In Inventories Requests, SpaceAge1957 writes:
  Please make changes to the following inventory:
 
Set No: 3468  Name: 1 x 4 Black Bricks
* 
3468-1 (Inv) 1 x 4 Black Bricks
50 Parts, 2000
Sets: Bulk Bricks

* Add 41 Part 3010 Black Brick 1 x 4

Comments from Submitter:
Plastic bag packet of ca 41 off Brick 1 x 4 in black. Ca 69g weight.

I don't exactly know what you are trying to do here. The image that I found
for this set says that it contains 50 pieces (see attached), which is what the
current inventory has in it. Are you saying that you have a different version
of the set that only has 41 pieces in it?

Cheers,
Randy

Based on their post it looks like they just weighed the bag with bricks, divided
by the catalog weight of the 1x4 brick and took off one to compensate for the
weight of the bag. This is not a correct way to determine the quantity of parts
in a bag because weight of parts can change when Lego makes changes to the molds.
If they actually counted the number of bricks in the bag they'd probably
find 50 of them.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Nov 8, 2019 09:16
 Subject: Re: Forum Reforms
 Viewed: 44 times
 Topic: Suggestions
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Suggestions, Hsousa writes:
  Hello there, thank you for replying.

However I wanted to know if there's a way of, when clicking on a thread,
displaying the entire thread? There's an additional click on the "Entire
thread on one page" link every time I want to read a thread.

To rephrase, I want to open the foruns in "Compact" mode (done), but open the
threads in "Entire thread on one page". Is it possible?

You can click on the text bubble icon in front of the topic title to display
the entire thread on one page.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Nov 8, 2019 04:11
 Subject: Re: Inventory Change Request for Set 1296-1
 Viewed: 25 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, Admin_Russell writes:
  In Inventories Requests, Admin_Russell writes:
  In Inventories Requests, randyf writes:
  In Inventories Requests, randyf writes:
  In Inventories Requests, leopard37 writes:
  Please make changes to the following inventory:
 
Set No: 1296  Name: Land Scooper
* 
1296-1 (Inv) Land Scooper
27 Parts, 1 Minifigure, 2000
Sets: Town: Classic Town: Construction

* Change 1 Part {White to Yellow} 3002 Brick 2 x 3
* Change 4 Part {White to Yellow} 6014u Wheel 11mm D. x 12mm, Undetermined Hole Type

Comments from Submitter:
Please see instructions, and picture of built set. No white pieces.

The instructions that I see at the LEGO site show white wheels. Where are you
seeing yellow wheels in the instructions? I agree that the set picture shows
yellow wheels, but the inventory is based on the instructions.

Cheers,
Randy

There was also another mistake in the inventory. It contains two
 
Part No: 3023  Name: Plate 1 x 2
* 
3023 Plate 1 x 2
Parts: Plate {Light Gray}
instead of just one.

Randy

Looks like there is an alternate version of the instructions:

https://www.brickfactory.info/set/index.html

Sorry, I thought you were saying the instructions you were looking at showed
only one Light Gray plate.

Btw, the official Lego data on Brickset shows yellow wheels, so I'm inclined
to think the drawings in the instructions are the problem.

All photos I've found of built sets show yellow wheels. So I agree that this
must be a mistake in the instructions. That seems more likely than all owners
of this set changing the wheels in their sets.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Nov 6, 2019 07:59
 Subject: Re: Inventory Change Request for Set 60004-1
 Viewed: 27 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, Daige writes:
  Please make changes to the following inventory:
 
Set No: 60004  Name: Fire Station
* 
60004-1 (Inv) Fire Station
731 Parts, 5 Minifigures, 2013
Sets: Town: City: Fire

* Add 1 Part 85861 Yellow Plate, Round 1 x 1 with Open Stud

This set was redesigned and this part was one of the added parts. You can find
it in the alternate items section of the inventory.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Nov 5, 2019 23:38
 Subject: Re: Inventory Change Request for Set 7752-1
 Viewed: 13 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, mlbsma writes:
  Please make changes to the following inventory:
 
Set No: 7752  Name: Count Dooku's Solar Sailer
* 
7752-1 (Inv) Count Dooku's Solar Sailer
357 Parts, 4 Minifigures, 2009
Sets: Star Wars: Star Wars The Clone Wars

* Add 2 Part 4073 Trans-Red Plate, Round 1 x 1

Comments from Submitter:
This item listed in spare parts but not in the main list.

They are in the inventory of the magna guard minifigures.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Oct 30, 2019 05:01
 Subject: Re: Inventory Change Request for Minifig sp010
 Viewed: 24 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, yoshik_cz writes:
  Hi,
thanks for the info, we heavily argued about this with a colleague of mine.
What can I do to help?
Am I to create new database entry for a minifig here on Bricklink and suggest
the swap in the sets? I am unsure how to name the "new one". Or the admins will
do that?
Regards
Yoshik

Randy already took care of this. So you don't have to do anything.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Oct 29, 2019 06:19
 Subject: Re: Inventory Change Request for Set 40358-1
 Viewed: 27 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, jim.harrison204 writes:
  Please make changes to the following inventory:
 
Set No: 40358  Name: Bean There, Donut That
* 
40358-1 (Inv) Bean There, Donut That
130 Parts, 4 Minifigures, 2018
Sets: Promotional

* Delete 1 Part 30151b Trans-Clear Brick, Round 2 x 2 x 1 2/3 Dome Top - Hollow Stud

Comments from Submitter:
Hello, I just parted out 50 of this set and there were 0 in total of this Trans-Clear Brick, Round 2 x 2 x 1 2/3 Dome Top - Hollow Stud.

Thanks!

The part is clearly shown in set images and instructions. I also checked a build
video that shows it. Did you get an other part instead of this one?
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Oct 28, 2019 11:35
 Subject: Re: Inventory Change Request for Set 6371-1
 Viewed: 20 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, maesehn writes:
  Please make changes to the following inventory:
 
Set No: 6371  Name: Service Station
* 
6371-1 (Inv) Service Station
243 Parts, 3 Minifigures, 1983
Sets: Town: Classic Town: Gas Station

* Change {1 to 2} Part Blue 3005 Brick 1 x 1
* Change {5 to 4} Part Blue 4070 Brick, Modified 1 x 1 with Headlight

I own this set and can confirm that the quantities for these parts in the inventory
are correct. This request will be rejected.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Oct 25, 2019 09:18
 Subject: Re: Inventory Change Request for Set 6385-1
 Viewed: 14 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, gian8482 writes:
  Please make changes to the following inventory:
 
Set No: 6385  Name: Fire House-I
* 
6385-1 (Inv) Fire House-I
384 Parts, 3 Minifigures, 1985
Sets: Town: Classic Town: Fire

* Add 5 Part 4085b Red Plate, Modified 1 x 1 with Clip Vertical - Type 2 (thin U clip) (Alternate)

Confirmed in set in my own personal collection that was never mixed with parts
from other sets.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Oct 25, 2019 09:18
 Subject: Re: Inventory Change Request for Set 6385-1
 Viewed: 14 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, gian8482 writes:
  Please make changes to the following inventory:
 
Set No: 6385  Name: Fire House-I
* 
6385-1 (Inv) Fire House-I
384 Parts, 3 Minifigures, 1985
Sets: Town: Classic Town: Fire

* Add 2 Part 4085b Black Plate, Modified 1 x 1 with Clip Vertical - Type 2 (thin U clip) (Alternate)

Comments from Submitter:
inventory from owned set

Confirmed in set in my own personal collection that was never mixed with parts
from other sets.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Oct 25, 2019 09:02
 Subject: Re: Inventory Change Request for Set 8448-1
 Viewed: 27 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, Admin_Russell writes:
  In Inventories Requests, axaday writes:
  In Inventories Requests, axaday writes:
  Please make changes to the following inventory:
 
Set No: 8448  Name: Super Street Sensation
* 
8448-1 (Inv) Super Street Sensation
1437 Parts, 1999
Sets: Technic: Model: Traffic

* Add 4 Part 32197 Metallic Silver Wheel 81.6 x 34 ZR Three Spoke Swirl
* Add 4 Part 32196 Black Tire 81.6 x 34 ZR Technic Thin Sporty Tread
* Change 2 Part Trans-Clear {32181c02 Technic, Shock Absorber 10L Damped (Spring Undetermined) to 32181c05 Technic, Shock Absorber 10L Damped - Normal Spring}
* Change 4 Part Metallic Silver 32197c01 Wheel 81.6 x 34 ZR Three Spoke Swirl, with Black Tire 81.6 x 34 ZR Thin Sporty Tread (32197 / 32196) {Regular to Counterpart}

Comments from Submitter:
Pics to follow

Based on that image, the tire / wheel assembly here should be considered "for
purpose of display" and not listed as a regular item.

Especially considering that they're not even assembled in that display tray.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Oct 24, 2019 03:25
 Subject: Re: Inventory Change Request for Set 8459-1
 Viewed: 17 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, dough29 writes:
  Please make changes to the following inventory:
 
Set No: 8459  Name: Pneumatic Front End Loader
* 
8459-1 (Inv) Pneumatic Front End Loader
591 Parts, 1997
Sets: Technic: Model: Construction

* Change 2 Part Dark Gray {75c04 Hose, Rigid 3mm D. 4L / 3.2cm to 75c05 Hose, Rigid 3mm D. 5L / 4.0cm}

Comments from Submitter:
I own original set and instructions and original rigid hoses are 40mm long

See Randy's reply to your other inventory change request https://www.bricklink.com/messageThread.asp?ID=258818
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Oct 23, 2019 05:23
 Subject: Re: Inventory Change Request for Set 256-1
 Viewed: 25 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, desmalle writes:
  Please make changes to the following inventory:
 
Set No: 256  Name: Police Officers and Motorcycle
* 
256-1 (Inv) Police Officers and Motorcycle
82 Parts, 1976
Sets: Building Set with People: Police

* Delete 1 Part 3184 White Plate, Modified 1 x 4 with Towball

Comments from Submitter:
Built this set according to leaflet, no such plate to be found on the drawings.

This was added in 2009 by viejos. I'd like to know if he remembers the source
for that change request before I do anything with this request. He wouldn't
have just added it for no reason, but it was 10 years ago so he may not remember
it.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Oct 20, 2019 14:45
 Subject: Re: Inventory Change Request for Set 70351-1
 Viewed: 18 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, ElvisandBane writes:
  Please make changes to the following inventory:
 
Set No: 70351  Name: Clay's Falcon Fighter Blaster
* 
70351-1 (Inv) Clay's Falcon Fighter Blaster
499 Parts, 3 Minifigures, 2017
Sets: NEXO KNIGHTS

* Add 2 Part 87079pb639L Dark Blue Tile 2 x 4 with Silver Circuitry and Orange Arrows Pattern Model Left Side (Sticker) - Set 70351 (Counterpart)

Quantity should be 1. I have changed that.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Oct 19, 2019 16:29
 Subject: Re: Inventory Change Request for Set 7942-1
 Viewed: 18 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, OliS writes:
  Please make changes to the following inventory:
 
Set No: 7942  Name: Off Road Fire Rescue
* 
7942-1 (Inv) Off Road Fire Rescue
127 Parts, 1 Minifigure, 2007
Sets: Town: City: Fire

* Delete 1 Part 2584c09 Black String Reel 2 x 2 Complete with String and Yellow Hose Nozzle Simple (Counterpart)
* Add 1 Part 2584c11 Black String Reel 2 x 2 Complete with String and Yellow Hose Nozzle Elaborate (Counterpart)

Comments from Submitter:
The partslist uses the elaborated nozzle #60849

Both types of hose nozzle have been found in this set. I will accept your request
to add 2584c11 but the request to delete 2584c09 will be rejected.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Oct 19, 2019 16:27
 Subject: Re: Inventory Change Request for Set 9095-1
 Viewed: 21 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, OmnipresentECA writes:
  In Inventories Requests, OmnipresentECA writes:
  Please make changes to the following inventory:
 
Set No: 9095  Name: Nitro Predator
* 
9095-1 (Inv) Nitro Predator
83 Parts, 1 Minifigure, 2012
Sets: Racers

* Add 1 Part 93273 Lime Slope, Curved 4 x 1 Double

Comments from Submitter:
9095 is missing a part on the list, and it is not even listed as a part in BrickLink. The part is a Lime 93273 with a sticker on it. the sticker being the 3 White Half Circles with 4 White Teeth. It is the upper sticker on the front of the set. You can see it in the Set, on the sticker sheet, but not as a Part with the sticker on it.

If a Picture is needed let me know and I can submit one.

The procedure to add stickered Counterparts to BrickLink and set inventories
is as follows:

(1) Add the stickered parts to the BrickLink catalog:
https://www.bricklink.com/wantedCatalog.asp?catType=P

Help on adding items to the BrickLink catalog:
https://www.bricklink.com/help.asp?helpID=71

(2) Add images to the BrickLink catalog for the stickered parts:
https://www.bricklink.com/v2/catalog/catalogImageAdd.page?itemType=P

Help on adding images to the BrickLink catalog:
https://www.bricklink.com/help.asp?helpID=87

(3) Fill out Inventory Change Requests to add the stickered parts to the set
inventories after they are approved by the Catalog Associate.

----------

The following thread may also be of help:
https://www.bricklink.com/message.asp?ID=1085264

----------

These requests will be rejected.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Oct 19, 2019 06:18
 Subject: Re: Inventory Change Request for Set 75250-1
 Viewed: 20 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, The_Brick_Freak writes:
  Please make changes to the following inventory:
 
Set No: 75250  Name: Pasaana Speeder Chase
* 
75250-1 (Inv) Pasaana Speeder Chase
357 Parts, 4 Minifigures, 2019
Sets: Star Wars: Star Wars Episode 9

* Change 4 Part Dark Bluish Gray {2436c Bracket 1 x 2 - 1 x 4 with Two Rounded Corners at the Bottom to 2436b Bracket 1 x 2 - 1 x 4 with Rounded Corners}

Comments from Submitter:
Change from 2 rounded corners to 4 rounded corners

The set was inventoried by a catalog associate who would have recognized the
correct variant in the set he used for this inventory. If you found 2436b in
a sealed set you can add it as an alternate.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Oct 18, 2019 10:44
 Subject: Re: Inventory Change Request for Set 6688-1
 Viewed: 23 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, gian8482 writes:
  Please make changes to the following inventory:
 
Set No: 6688  Name: Ambulance
* 
6688-1 (Inv) Ambulance
62 Parts, 2 Minifigures, 1985
Sets: Town: Classic Town: Hospital

* Delete 3 Part 3004 White Brick 1 x 2
* Add 1 Part 3004 White Brick 1 x 2

This request will be rejected. Three white 1x2 bricks were included in this set
for the alternate models that are shown on the box.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Oct 18, 2019 00:28
 Subject: Re: Inventory Change Request for Set 6380-1
 Viewed: 21 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, rob.ulm writes:
  Please make changes to the following inventory:
 
Set No: 6380  Name: Emergency Treatment Center (St. Mary's Hospital)
* 
6380-1 (Inv) Emergency Treatment Center (St. Mary's Hospital)
270 Parts, 5 Minifigures, 1987
Sets: Town: Classic Town: Hospital

* Change 1 Part Green {2435 Plant, Tree Pine Small 2 x 2 x 4 to 3471 Plant, Tree Pine Large 4 x 4 x 6 2/3}

Comments from Submitter:
This set has a large tree, not a small tree.

What is your source for this request? The set images show the large tree, but
I just checked the set in my personal collection and mine has the small tree.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Oct 17, 2019 06:29
 Subject: Re: Inventory Change Request for Set 70667-1
 Viewed: 17 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, Mirko8710 writes:
  In Inventories Requests, paulvdb writes:
  In Inventories Requests, Mirko8710 writes:
  Please make changes to the following inventory:
 
Set No: 70667  Name: Kai's Blade Cycle & Zane's Snowmobile
* 
70667-1 (Inv) Kai's Blade Cycle & Zane's Snowmobile
361 Parts, 4 Minifigures, 2019
Sets: NINJAGO: Legacy: Rise of the Snakes

* Add 1 Part 30602pb103 White Slope, Curved 2 x 2 Lip with Ice, Buttons and Gauge Pattern (Sticker) - Set 70667 (Counterpart)
* Add 2 Part 15068pb215 Blue Slope, Curved 2 x 2 with Ice Pattern (Sticker) - Set 70667 (Counterpart)
* Add 1 Part 61678pb121 White Slope, Curved 4 x 1 with Ice Pattern (Sticker) - Set 70667 (Counterpart)
* Add 1 Part 61678pb120L Red Slope, Curved 4 x 1 with Yellow and Orange Flame Pattern Model Left Side (Sticker) - Set 70667 (Counterpart)
* Add 1 Part 61678pb120R Red Slope, Curved 4 x 1 with Yellow and Orange Flame Pattern Model Right Side (Sticker) - Set 70667 (Counterpart)
* Add 1 Part 93606pb098 Black Slope, Curved 4 x 2 with Yellow, Orange and Red Flames Pattern (Sticker) - Set 70667 (Counterpart)
* Add 1 Part 11946pb032 Red Technic, Panel Fairing #21 Very Small Smooth, Side B with Flames and 'KAI' Pattern (Sticker) - Set 70667 (Counterpart)
* Add 1 Part 11947pb032 Red Technic, Panel Fairing #22 Very Small Smooth, Side A with Flames and 'KAI' Pattern (Sticker) - Set 70667 (Counterpart)
* Add 1 Part 63864pb087 Reddish Brown Tile 1 x 3 with White Kanji Characters on Dark Red Background Pattern 1 (Sticker) - Set 70667 (Counterpart)
* Add 1 Part 63864pb088 Reddish Brown Tile 1 x 3 with White Kanji Characters on Dark Red Background Pattern 2 (Sticker) - Set 70667 (Counterpart)
* Add 1 Part 63864pb089 Reddish Brown Tile 1 x 3 with White Kanji Characters on Dark Red Background Pattern 3 (Sticker) - Set 70667 (Counterpart)

I have approved all except 15068pb215. In the instructions it shows two of these
with the same sticker, but if you look at the image of the stickersheet you can
see that the two stickers are actually mirror images of each other.


Hi,

I really didn't see that! So, what can I do? Should I upload both as Left
and Right part? Let me know, thanks!
Mirko

The instructions show the same sticker on both sides, so you don't really
know which sticker should be left and which should be right. You can use Side
A and Side B instead of left and right.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Oct 16, 2019 14:34
 Subject: Re: Inventory Change Request for Set 70667-1
 Viewed: 21 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, Mirko8710 writes:
  Please make changes to the following inventory:
 
Set No: 70667  Name: Kai's Blade Cycle & Zane's Snowmobile
* 
70667-1 (Inv) Kai's Blade Cycle & Zane's Snowmobile
361 Parts, 4 Minifigures, 2019
Sets: NINJAGO: Legacy: Rise of the Snakes

* Add 1 Part 30602pb103 White Slope, Curved 2 x 2 Lip with Ice, Buttons and Gauge Pattern (Sticker) - Set 70667 (Counterpart)
* Add 2 Part 15068pb215 Blue Slope, Curved 2 x 2 with Ice Pattern (Sticker) - Set 70667 (Counterpart)
* Add 1 Part 61678pb121 White Slope, Curved 4 x 1 with Ice Pattern (Sticker) - Set 70667 (Counterpart)
* Add 1 Part 61678pb120L Red Slope, Curved 4 x 1 with Yellow and Orange Flame Pattern Model Left Side (Sticker) - Set 70667 (Counterpart)
* Add 1 Part 61678pb120R Red Slope, Curved 4 x 1 with Yellow and Orange Flame Pattern Model Right Side (Sticker) - Set 70667 (Counterpart)
* Add 1 Part 93606pb098 Black Slope, Curved 4 x 2 with Yellow, Orange and Red Flames Pattern (Sticker) - Set 70667 (Counterpart)
* Add 1 Part 11946pb032 Red Technic, Panel Fairing #21 Very Small Smooth, Side B with Flames and 'KAI' Pattern (Sticker) - Set 70667 (Counterpart)
* Add 1 Part 11947pb032 Red Technic, Panel Fairing #22 Very Small Smooth, Side A with Flames and 'KAI' Pattern (Sticker) - Set 70667 (Counterpart)
* Add 1 Part 63864pb087 Reddish Brown Tile 1 x 3 with White Kanji Characters on Dark Red Background Pattern 1 (Sticker) - Set 70667 (Counterpart)
* Add 1 Part 63864pb088 Reddish Brown Tile 1 x 3 with White Kanji Characters on Dark Red Background Pattern 2 (Sticker) - Set 70667 (Counterpart)
* Add 1 Part 63864pb089 Reddish Brown Tile 1 x 3 with White Kanji Characters on Dark Red Background Pattern 3 (Sticker) - Set 70667 (Counterpart)

I have approved all except 15068pb215. In the instructions it shows two of these
with the same sticker, but if you look at the image of the stickersheet you can
see that the two stickers are actually mirror images of each other.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Oct 16, 2019 04:57
 Subject: Re: Inventory Change Request for Set 7783-1
 Viewed: 29 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, babrap writes:
  Please make changes to the following inventory:
 
Set No: 7783  Name: The Batcave: The Penguin and Mr. Freeze's Invasion
* 
7783-1 (Inv) The Batcave: The Penguin and Mr. Freeze's Invasion
1034 Parts, 7 Minifigures, 2006
Sets: Batman I

* Delete 6 Part 57893 Black Support 2 x 2 x 10 Girder Triangular Vertical - Type 2 - Open Side Top, 1 Post & 1 Panel

Comments from Submitter:
this item is incorrect according to the part list in the manual, the instructions and the pictures of the set.

it should be 30517 which doesnt have the black panel.

Instructions and box art don't always show the part variants that are actually
included in the set. I check a couple of video reviews and they both showed this
set with part 57893. This request will be rejected.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Oct 14, 2019 23:25
 Subject: Re: Inventory Change Request for Set 4867-1
 Viewed: 18 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, mlbsma writes:
  Please make changes to the following inventory:
 
Set No: 4867  Name: Hogwarts
* 
4867-1 (Inv) Hogwarts
433 Parts, 7 Minifigures, 2011
Sets: Harry Potter: Deathly Hallows

* Add 1 Part 30381 Black Minifigure, Headgear Hood (match ID 30381)

Comments from Submitter:
The BL inventory indicates one minifig black headgear hood, the instruction book I have indicates there are two, so please add one.
Thank you.

The second hood is already there in the inventory of the Dementor minifigure.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Oct 8, 2019 23:28
 Subject: Re: Inventory Change Request for Set 5974-1
 Viewed: 23 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, laulainendebra writes:
  Please make changes to the following inventory:
 
Set No: 5974  Name: Galactic Enforcer
* 
5974-1 (Inv) Galactic Enforcer
788 Parts, 7 Minifigures, 2009
Sets: Space: Space Police III

* Add 1 Part 4733 Black Brick, Modified 1 x 1 with Studs on 4 Sides
* Add 1 Part 48729 Dark Bluish Gray Bar 1L with Clip Mechanical Claw

Comments from Submitter:
Someone should be comparing LEGO inventory of this set to what is listed on Bricklink. There are more pieces missing than this one.

These parts are included in the inventory of the droid minifigure.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Oct 6, 2019 10:02
 Subject: Re: Inventory Change Request for Set 10194-1
 Viewed: 22 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, primadeluxe writes:
  Yes! Black ones.

In Inventories Requests, primadeluxe writes:
  Please make changes to the following inventory:
 
Set No: 10194  Name: Emerald Night
* 
10194-1 (Inv) Emerald Night
1072 Parts, 3 Minifigures, 2009
Sets: Train: RC Train

* Add 3 Part 4085c Black Plate, Modified 1 x 1 with Clip Vertical - Type 3 (thick U clip) (Counterpart)

Comments from Submitter:
Original set inventory

Ok. But they should be added as alternates, not counterparts. I'll change
that for you.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Oct 6, 2019 08:06
 Subject: Re: Inventory Change Request for Set 3724-1
 Viewed: 26 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, WilliamH writes:
  In Inventories Requests, paulvdb writes:
  Do you know if they came assembled in the set?


Not sure. But I do know that Lego supplied these assembled as both variants
appeared in the pick-a-brick at Legoland Windsor around the same time as the
set was in production.

Based on that and the instructions it seems almost certain that they also came
assembled in this set.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Oct 6, 2019 07:54
 Subject: Re: Inventory Change Request for Set 10194-1
 Viewed: 21 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, primadeluxe writes:
  Please make changes to the following inventory:
 
Set No: 10194  Name: Emerald Night
* 
10194-1 (Inv) Emerald Night
1072 Parts, 3 Minifigures, 2009
Sets: Train: RC Train

* Add 3 Part 4085c Black Plate, Modified 1 x 1 with Clip Vertical - Type 3 (thick U clip) (Counterpart)

Comments from Submitter:
Original set inventory

Were these included in your set instead of the dark bluish gray ones?
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Oct 6, 2019 07:49
 Subject: Re: Inventory Change Request for Set 10219-1
 Viewed: 24 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, primadeluxe writes:
  Please make changes to the following inventory:
 
Set No: 10219  Name: Maersk Container Train
* 
10219-1 (Inv) Maersk Container Train
1218 Parts, 3 Minifigures, 2011
Sets: Train: RC Train

* Add 1 Part 3626cpx288 Yellow Minifigure, Head Beard with Thick Gray Eyebrows, Angular Beard, Open White Mouth, White Pupils Pattern - Hollow Stud (Counterpart)
* Add 1 Part 3626cpb0331 Yellow Minifigure, Head Glasses with Gray Frame Sides, Brown Eyebrows and Open Smile Pattern - Hollow Stud (Counterpart)
* Add 1 Part 3626cpb0193 Yellow Minifigure, Head Glasses with Silver Sunglasses, Black Eyebrows Pointed, Thin Grin Pattern - Hollow Stud (Counterpart)

Comments from Submitter:
Original set inventory

For alternate stud types of minifigure heads you can ask to have a note added
to the minifigure inventory stating that both types of heads can be found in
the minifigure. I'll do that for these minifigures.

If the alternate head is not in any inventories it can be added to the set as
an alternate, not as a counterpart. That way the head will show up with a known
color. I'll do that for 3626cpb0193 which is the only one of these heads
that is not in any inventories.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Oct 5, 2019 12:43
 Subject: Re: Inventory Change Request for Set 3724-1
 Viewed: 37 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, WilliamH writes:
  Please make changes to the following inventory:
 
Set No: 3724  Name: Dragon
* 
3724-1 (Inv) Dragon
1535 Parts, 2001
Sets: Sculptures

* Delete 2 Part 2429c01 Green Hinge Plate 1 x 4 Swivel Top / Base
* Delete 2 Part 2429c01 Red Hinge Plate 1 x 4 Swivel Top / Base
* Add 2 Part 2430 Green Hinge Plate 1 x 4 Swivel Top
* Add 2 Part 2430 Red Hinge Plate 1 x 4 Swivel Top
* Add 2 Part 2429 Green Hinge Plate 1 x 4 Swivel Base
* Add 2 Part 2429 Red Hinge Plate 1 x 4 Swivel Base

Comments from Submitter:
The hinge plates are used as red/green pairs and not red/red and green/green pairs and were not supplied as such. So it's incorrect to represent them like this. If individual hinge plate parts are not to appear in inventories then it will necessary to add two new hinge plate assemblies

I checked the building steps in the instructions where they are used. They are
shown as complete assemblies there. Do you know if they came assembled in the
set? In that case I'd say that the assemblies should be added to the catalog.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Oct 2, 2019 17:30
 Subject: Re: Inventory Change Request for Set 1589-1
 Viewed: 30 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, VVV writes:
  Please make changes to the following inventory:
 
Set No: 1589  Name: Town Square
* 
1589-1 (Inv) Town Square
413 Parts, 5 Minifigures, 1978
Sets: Town: Classic Town: Traffic

* Change {5 to 4} Part Yellow 3622 Brick 1 x 3
* Change {1 to 2} Part Black 3176 Plate, Modified 3 x 2 with Hole

Comments from Submitter:
Building this and find two black 3176 on picture 10 and only 4 3622 one in bus cabin and three in ice outlet wall

I only have 3062b even though i see 3062a in the drawings, alternative pieces?

You are correct about the black 3176. There are indeed two shown in the instructions.
And I only see four yellow 3622 in the instructions for the main model. So that
request can also be approved unless more are used in one of the alternate models.
Unfortunately I haven't found clear enough images of the alternate model
to determine that. But it is more likely that this was a mistake in the original
inventory.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Oct 2, 2019 17:11
 Subject: Re: Inventory Change Request for Set 6032-1
 Viewed: 24 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, roi.zentner writes:
  Please make changes to the following inventory:
 
Set No: 6032  Name: Catapult Crusher
* 
6032-1 (Inv) Catapult Crusher
52 Parts, 1 Minifigure, 2000
Sets: Castle: Knights Kingdom I

* Delete 1 Part 6029b White Minifigure, Plume Feathered Headdress
* Change {1 to 2} Part White 6029a Cattle Horns (Cattlehorns)

Comments from Submitter:
The Plume Feathered Headdress is nowhere to be found in the building instructions. Instead, you can clearly see that both the knight's helmet and the horse head are adorned with white horns. Therefore, I suggest adding one horn and deleting the plume.

There are already two cattle horns in this inventory. One in the regular items
section and one in the inventory of the knight minifigure. The headdress is a
regular item because of the rules for parts that come on sprues:

"Complete sprues are included in this section unless some parts from the sprues
are used in minifigures. In that case, the parts from the sprues that are not
used in minifigures are included in this section."

See the help page https://www.bricklink.com/help.asp?helpID=1562
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Oct 1, 2019 09:15
 Subject: Inventory Change Request for Set 6410-1
 Viewed: 20 times
 Topic: Inventories Requests (Entry)
 Status:Open
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
Please make changes to the following inventory:
 
Set No: 6410  Name: Cabana Beach
* 
6410-1 (Inv) Cabana Beach
135 Parts, 4 Minifigures, 1994
Sets: Town: Paradisa

* Add 1 Part BA87pb01 White Stickered Assembly 2 x 2 x 2 with Butterfly and Two Flowers Pattern (Sticker) - Set 6410 - 1 Brick 1 x 2, 1 Brick 2 x 2 (Counterpart)
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Oct 1, 2019 00:56
 Subject: Inventory Change Request for Set 7498-1
 Viewed: 28 times
 Topic: Inventories Requests (Entry)
 Status:Open
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
Please make changes to the following inventory:
 
Set No: 7498  Name: Police Station
* 
7498-1 (Inv) Police Station
759 Parts, 6 Minifigures, 2011
Sets: Town: City: Police

* Add 1 Part 3010pb103 White Brick 1 x 4 with White 'POLICE' Bold Font on Blue Background Pattern (Sticker) - Set 7743 (Counterpart)
* Change 1 Part Black {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 1 Part Dark Bluish Gray {2453 Brick 1 x 1 x 5 - Undetermined Stud Type to 2453a Brick 1 x 1 x 5 - Blocked Open Stud or Hollow Stud}
* Change 2 Part Light Bluish Gray {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove}
* Change 12 Part White {2453 Brick 1 x 1 x 5 - Undetermined Stud Type to 2453a Brick 1 x 1 x 5 - Blocked Open Stud or Hollow Stud}
* Change 1 Part White {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}

Comments from Submitter:
Checked in set in my personal collection that was built from sealed set contents and never mixed with parts from other sets.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Oct 1, 2019 00:43
 Subject: Re: Inventory Change Request for Set 7498-1
 Viewed: 20 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, AvD11T writes:
  In Inventories Requests, paulvdb writes:
  In Inventories Requests, AvD11T writes:
  Please make changes to the following inventory:
 
Set No: 7498  Name: Police Station
* 
7498-1 (Inv) Police Station
759 Parts, 6 Minifigures, 2011
Sets: Town: City: Police

* Add 1 Part 3010pb152 White Brick 1 x 4 with White 'POLICE' Short Font on Blue Background Pattern (Sticker) (Counterpart)

Comments from Submitter:
Please add counterpart 1x, part 3010pb152, brick 1x4 with ‘police’ sticker.
See booklet 2, instruction 27, there is the sticker added to the part.
Thx.

Looks like this is not the correct sticker for this set. The font on the sticker
in this set is bigger than on
 
Part No: 3010pb152  Name: Brick 1 x 4 with White 'POLICE' Short Font on Blue Background Pattern (Sticker) - Sets 7285 / 7288
* 
3010pb152 Brick 1 x 4 with White 'POLICE' Short Font on Blue Background Pattern (Sticker) - Sets 7285 / 7288
Parts: Brick, Decorated
Looks like the correct stickered part should be
 
Part No: 3010pb103  Name: Brick 1 x 4 with White 'POLICE' Bold Font on Blue Background Pattern (Sticker) - Sets 7498 / 7743
* 
3010pb103 Brick 1 x 4 with White 'POLICE' Bold Font on Blue Background Pattern (Sticker) - Sets 7498 / 7743
Parts: Brick, Decorated

i choose nr 152 because it is the same sticker and year it came out (2011) like
this part in white
 
Part No: 30413pb013  Name: Panel 1 x 4 x 1 with White 'POLICE' Bold Narrow Font Large on Blue Background Pattern (Sticker) - Sets 3648 / 3661 / 7498 / 7744
* 
30413pb013 Panel 1 x 4 x 1 with White 'POLICE' Bold Narrow Font Large on Blue Background Pattern (Sticker) - Sets 3648 / 3661 / 7498 / 7744
Parts: Panel, Decorated
this comes from same set 7498.
part 103 is much older, from 2008.
Am i incorrect in this?

It looks like Lego used different fonts for stickers from the 2011 sets. As you
can see in the image 3010pb152 has a smaller font with more empty blue space
above and below the letters. In set 7498 there is a bigger font with less empty
blue space above and below the letters just like in set 7743. See my attached
image of the stickered 1x4 bricks from the 7498 and 7743 side by side. So in
this set 3010pb103 would be the correct stickered counterpart.
 
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Sep 30, 2019 09:49
 Subject: Re: Inventory Change Request for Set 7498-1
 Viewed: 16 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, AvD11T writes:
  Please make changes to the following inventory:
 
Set No: 7498  Name: Police Station
* 
7498-1 (Inv) Police Station
759 Parts, 6 Minifigures, 2011
Sets: Town: City: Police

* Add 1 Part 3010pb152 White Brick 1 x 4 with White 'POLICE' Short Font on Blue Background Pattern (Sticker) (Counterpart)

Comments from Submitter:
Please add counterpart 1x, part 3010pb152, brick 1x4 with ‘police’ sticker.
See booklet 2, instruction 27, there is the sticker added to the part.
Thx.

Looks like this is not the correct sticker for this set. The font on the sticker
in this set is bigger than on
 
Part No: 3010pb152  Name: Brick 1 x 4 with White 'POLICE' Short Font on Blue Background Pattern (Sticker) - Sets 7285 / 7288
* 
3010pb152 Brick 1 x 4 with White 'POLICE' Short Font on Blue Background Pattern (Sticker) - Sets 7285 / 7288
Parts: Brick, Decorated
Looks like the correct stickered part should be
 
Part No: 3010pb103  Name: Brick 1 x 4 with White 'POLICE' Bold Font on Blue Background Pattern (Sticker) - Sets 7498 / 7743
* 
3010pb103 Brick 1 x 4 with White 'POLICE' Bold Font on Blue Background Pattern (Sticker) - Sets 7498 / 7743
Parts: Brick, Decorated
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Sep 30, 2019 09:33
 Subject: Inventory Change Request for Set 7286-1
 Viewed: 16 times
 Topic: Inventories Requests (Entry)
 Status:Open
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
Please make changes to the following inventory:
 
Set No: 7286  Name: Prisoner Transport
* 
7286-1 (Inv) Prisoner Transport
164 Parts, 2 Minifigures, 2011
Sets: Town: City: Police

* Change 4 Part White {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}

Comments from Submitter:
Checked set in my personal collection that was never mixed with parts from other sets.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Sep 29, 2019 23:55
 Subject: Re: Inventory Change Request for Set 8425-1
 Viewed: 23 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, uvt203 writes:
  Please make changes to the following inventory:
 
Set No: 8425  Name: Black Hawk
* 
8425-1 (Inv) Black Hawk
470 Parts, 1996
Sets: Technic: Model: Airport

* Delete 36 Part 4265a Light Gray Technic Bush 1/2 Toothed Type I
* Add 36 Part 4265b Light Gray Technic Bush 1/2 Toothed Type II

Comments from Submitter:
From my own set which I had from new.

Set was originally inventoried from instructions so we don't have evidence
that 4265a was ever in this set. It can always be added again if evidence is
found for its inclusion in this set but based on the part's timeline it's
likely that only 4265b was ever included in this set.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Sep 29, 2019 08:31
 Subject: Re: Inventory Change Request for Set 4549-1
 Viewed: 19 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, SezaR writes:
  In Inventories Requests, randyf writes:
  In Inventories Requests, SezaR writes:
  In Inventories Requests, SezaR writes:
  Please make changes to the following inventory:
 
Set No: 4549  Name: Container Double Stack
* 
4549-1 (Inv) Container Double Stack
443 Parts, 2 Minifigures, 1993
Sets: Train: 9V

* Add 1 Part 2972a Light Gray Train Base 6 x 34 Split-Level with Bottom Tubes and Three Holes at Each End (match ID 1)
* Change 1 Part Light Gray 2972 Train Base 6 x 34 Split-Level with Bottom Tubes {Regular to Alternate} {match ID 0 to 1}

The first variant has three hols on each end as it shows on the instructions.
It was used in starting 1993 for this set and 4547-1. In later productions, the
later variant with one hole on each end was produced coming with this set too.
See
https://www.worthpoint.com/worthopedia/lego-system-4549-container-double-412853958

The set you linked to shows proof for the one-hole version, but I do not feel
comfortable to add the three-hole version just based on the instructions.

At this time,
 
Part No: 2972  Name: Train Base 6 x 34 Split-Level with Bottom Tubes (Undetermined Type)
* 
2972 Train Base 6 x 34 Split-Level with Bottom Tubes (Undetermined Type)
Parts: Train
Marked for Deletion
is basically a catch-all entry since it can include both versions of the part
as the catalog note states. Therefore, the inventory is technically not incorrect
until the one-hole version gets its own catalog entry and this part gets marked
for deletion.

Any additional thoughts on this, Paul?

Randy

Hi Randy,

In my opinion, there is no doubt the three-hole was the first version and it
was used for both sets 4547 and 4549. The set 4549 was available in US only as
"shop at home" as far as I see in the catalogs which is why it is rare there.
If you check in some European markets, most copies come with 3-hole versions.
Let me share my thoughts on this one.

This piece is rare, appeared only in early releases of there two sets. If not,
then we should assume that TLG produced both versions since very early 1993,
used the one-hole version for 4547-1 (against the instructions) and the three-hole
version for 4549-1 and later, they used the one-hole version for 4547-1 too.
Then as most used copies of 4549-1 in Europe come with 3-hole versions, we should
also assume that their owners replaced the original 1-hole one with the 3-hole
version.

Here are two used copies. I also bought one copy from Germany coming with 3-hole
variant
https://picclick.de/Lego-System-4549-Container-Double-Stack-Road-%C2%B4n%C2%B4-Rail-153552552889.html

https://picclick.de/LEGO-Containertransportwagen-Container-Double-Stack-Set-Nr-4549-183867635295.html

It is possible to find an opened new copy of 4549-1 coming with 3-hole version,
sometime in the future but then, how can we be sure that this piece would be
original to the set as it does not come in a sealed bag?

I have ordered a light tent but I am not sure I have the one-hole version. I
need to check my second copy of 4549-1. But I can add it to the catalog and then,
you can decide on how to proceed with the inventory of this set.

Reza

I have just submitted 2972b to the catalog for the one hole variant so that we
can get rid of the undetermined 2972 in inventories. Based on your findings it
seems unlikely that several sellers of used sets would have somehow found a rare
2972a to include in their used sets, so I believe that it came in early production
runs of 4549. The fact that instructions and box art also show 2972a supports
the theory that 2972a was the first version and since both this and 4547 were
released in the same year it would have come in early productions runs of both
sets while 2972b would have come in later production runs of both sets.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Sep 29, 2019 03:40
 Subject: Inventory Change Request for Set 6180-1
 Viewed: 25 times
 Topic: Inventories Requests (Entry)
 Status:Open
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
Please make changes to the following inventory:
 
Set No: 6180  Name: Hydro Search Sub
* 
6180-1 (Inv) Hydro Search Sub
271 Parts, 4 Minifigures, 1998
Sets: Aquazone: Hydronauts

* Add 2 Part 4864a Yellow Panel 1 x 2 x 2 - Solid Studs (match ID 1)
* Change 2 Part Black {2609 Magnet Holder Tile 2 x 2 (Undetermined Type) to 2609b Magnet Holder Tile 2 x 2 - Tall Arms with Deep Notch}
* Change 2 Part Yellow 4864b Panel 1 x 2 x 2 - Hollow Studs {Regular to Alternate} {match ID 0 to 1}

Comments from Submitter:
Source: sealed set contents.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Sep 28, 2019 12:37
 Subject: Re: Inventory Change Request for Set 7823-1
 Viewed: 25 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, SezaR writes:
  In Inventories Requests, randyf writes:
  In Inventories Requests, SezaR writes:
  In Inventories Requests, paulvdb writes:
  In Inventories Requests, SezaR writes:
  Please make changes to the following inventory:
 
Set No: 7823  Name: Container Crane Depot
* 
7823-1 (Inv) Container Crane Depot
467 Parts, 2 Minifigures, 1986
Sets: Train: 12V

* Add 2 Part 3242c Light Gray Train, Track 12V Conducting Rail Straight without Cable Connection Holes (Alternate) (match ID 2)
* Add 1 Part 3070b Red Tile 1 x 1 with Groove (3070) (Extra)
* Add 1 Part 3003old White Brick 2 x 2 without Inside Supports (match ID 5)
* Add 3 Part 3003old Red Brick 2 x 2 without Inside Supports (match ID 4)
* Add 2 Part 3002old Red Brick 2 x 3 without Cross Supports (match ID 6)
* Change 2 Part Light Gray 3242 Train, Track 12V Conducting Rail Straight {match ID 0 to 2}
* Change 1 Part White 3003 Brick 2 x 2 {Regular to Alternate} {match ID 0 to 5}
* Change 3 Part Red 3003 Brick 2 x 2 {Regular to Alternate} {match ID 0 to 4}
* Change 2 Part Red 3002 Brick 2 x 3 {Regular to Alternate} {match ID 0 to 6}

Comments from Submitter:
The evidence will be uploaded soon.

Did you forget to upload the evidence?

Two more comments:
- I don't know if the bricks 3002, 3003 should be kep as alternates or not.
I don't have any evidence for them coming in later releases.
- I had previously submitted a request for adding one red 1*1 tile as extra.
I gave a reliable evidence. My other inv. change requests were accepted using
the same evidence. But that one was rejected with no comment. I would like to
know why (and it helps me to know).
https://www.bricklink.com/message.asp?ID=1118225

Reza -

What about the clip lights? I see the thick-ring versions in the photos here:

http://www.brickshelf.com/cgi-bin/gallery.cgi?f=558274

The other Inventory Admin, Paul, is also the one who added the alternates to
the inventory back in 2011.

Did this set ever come with the thin-ring versions?

Cheers,
Randy

Randy,

For keeping early variant or removing them, there is no good solution but I have
my own philosophy
We know the later variations of clips and hinges came in early 1985. I have checked
light gray hinges since long time ago and I am convinced that we should remove
them for this set. Well, if one day somebody gives an evidence, we can add them
back but I don't think this would happen.

I didn't request to remove thin-clips for this set (from 1986) because I
have not checked enough number of used/new copies in the American market. I don't
know if those copies of 7823 sold in USA were imported directly from Denmark
or were produced in USA. This is a complicated case. My doubts raised as I have
seen few neat copies of American 6393 (with American box in the market of USA)
coming with thin clips in most colors (there come with 6393 in four colors) As
I have seen few used copies of 6393 coming with rare thin clips, I believe they
were still available in 1987. Admin Russel removed thin-clips from 6393 in Nov.
2018
https://www.bricklink.com/catalogInvChangeItem.asp?itemType=S&itemNo=6393-1&viewDate=Y&viewStatus=1

Once I have some more data, I come back to 6393. Unfortunately, I don't think
we find any new 6393, let alone an early release!

Now, coming back to 7823, I think it is better I check some more used/new copies
in the market of USA before requesting to remove them. I will come back to this
in few months.

Cheers,
Reza

I don't know if 4081a was ever included in this set, but if you look at the
instructions you'll see that they were at least used when the set was designed
because they are shown in the instructions. And if you build this set according
to the instructions with 4081b the thick rings will block the rear wheels of
the truck. Of course this does not prove that the set actually came with 4081b
and it is not the only set where 4081b was included even though it interferes
with the functionality of the set.

I'll leave the 4081a in the set for now, but we can get back to that once
you have had time to check more sets.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Sep 28, 2019 12:32
 Subject: Re: Inventory Change Request for Set 7823-1
 Viewed: 23 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, SezaR writes:
  In Inventories Requests, paulvdb writes:
  In Inventories Requests, SezaR writes:
  Please make changes to the following inventory:
 
Set No: 7823  Name: Container Crane Depot
* 
7823-1 (Inv) Container Crane Depot
467 Parts, 2 Minifigures, 1986
Sets: Train: 12V

* Add 2 Part 3242c Light Gray Train, Track 12V Conducting Rail Straight without Cable Connection Holes (Alternate) (match ID 2)
* Add 1 Part 3070b Red Tile 1 x 1 with Groove (3070) (Extra)
* Add 1 Part 3003old White Brick 2 x 2 without Inside Supports (match ID 5)
* Add 3 Part 3003old Red Brick 2 x 2 without Inside Supports (match ID 4)
* Add 2 Part 3002old Red Brick 2 x 3 without Cross Supports (match ID 6)
* Change 2 Part Light Gray 3242 Train, Track 12V Conducting Rail Straight {match ID 0 to 2}
* Change 1 Part White 3003 Brick 2 x 2 {Regular to Alternate} {match ID 0 to 5}
* Change 3 Part Red 3003 Brick 2 x 2 {Regular to Alternate} {match ID 0 to 4}
* Change 2 Part Red 3002 Brick 2 x 3 {Regular to Alternate} {match ID 0 to 6}

Comments from Submitter:
The evidence will be uploaded soon.

Did you forget to upload the evidence?

Two more comments:
- I don't know if the bricks 3002, 3003 should be kep as alternates or not.
I don't have any evidence for them coming in later releases.
- I had previously submitted a request for adding one red 1*1 tile as extra.
I gave a reliable evidence. My other inv. change requests were accepted using
the same evidence. But that one was rejected with no comment. I would like to
know why (and it helps me to know).
https://www.bricklink.com/message.asp?ID=1118225

We can remove the 3002 and 3003 from this inventory. They can always be added
as alternates if someone finds convincing evidence that they were included in
this set.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Sep 25, 2019 10:48
 Subject: Re: Inventory Change Request for Set 76049-1
 Viewed: 15 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, stergann writes:
  Please make changes to the following inventory:
 
Set No: 76049  Name: Avenjet Space Mission
* 
76049-1 (Inv) Avenjet Space Mission
492 Parts, 5 Minifigures, 1 Book, 2016
Sets: Super Heroes: Avengers

* Add 1 Part 3069bpb736 Blue Tile 1 x 2 with Groove with Gauge and Artificial Horizon on Black and Red Background Pattern (Sticker) - Set 76049 (Counterpart)

Color should be medium blue. I changed it.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Sep 25, 2019 10:42
 Subject: Inventory Change Request for Set 6661-1
 Viewed: 17 times
 Topic: Inventories Requests (Entry)
 Status:Open
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
Please make changes to the following inventory:
 
Set No: 6661  Name: TV Van / Mobile TV Studio
* 
6661-1 (Inv) TV Van / Mobile TV Studio
69 Parts, 1 Minifigure, 1989
Sets: Town: Classic Town: Traffic

* Add 1 Part 3070b Blue Tile 1 x 1 with Groove (3070) (Extra)
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Sep 25, 2019 09:59
 Subject: Inventory Change Request for Set 7034-1
 Viewed: 16 times
 Topic: Inventories Requests (Entry)
 Status:Open
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
Please make changes to the following inventory:
 
Set No: 7034  Name: Surveillance Truck
* 
7034-1 (Inv) Surveillance Truck
259 Parts, 2 Minifigures, 2003
Sets: Town: World City: Police

* Change 1 Part {Light Bluish Gray to Light Gray} 4592c02 Lever Small Base with Black Lever (Extra)

Comments from Submitter:
Should of course be light gray, not light bluish gray.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Sep 25, 2019 09:53
 Subject: Inventory Change Request for Set 7034-1
 Viewed: 17 times
 Topic: Inventories Requests (Entry)
 Status:Open
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
Please make changes to the following inventory:
 
Set No: 7034  Name: Surveillance Truck
* 
7034-1 (Inv) Surveillance Truck
259 Parts, 2 Minifigures, 2003
Sets: Town: World City: Police

* Add 1 Part 2780 Black Technic, Pin with Friction Ridges Lengthwise WITH Center Slots (Extra)
* Add 1 Part 4592c02 Light Bluish Gray Lever Small Base with Black Lever (Extra)
* Add 1 Part 2447 Black Minifigure, Visor Standard (Extra)
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Sep 25, 2019 05:58
 Subject: Re: Inventory Change Request for Set 6987-1
 Viewed: 19 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, paulvdb writes:
  Please make changes to the following inventory:
 
Set No: 6987  Name: Message Intercept Base
* 
6987-1 (Inv) Message Intercept Base
538 Parts, 5 Minifigures, 1988
Sets: Space: Blacktron I

* Change 1 Part Black {2453 Brick 1 x 1 x 5 - Undetermined Stud Type to 2453a Brick 1 x 1 x 5 - Blocked Open Stud or Hollow Stud}
* Change {2 to 1} Part Black {4073 Plate, Round 1 x 1 Straight Side to 4073c01 Plate, Round 1 x 1, 2 on Sprue}
* Change {2 to 1} Part Trans-Red {4073 Plate, Round 1 x 1 Straight Side to 4073c01 Plate, Round 1 x 1, 2 on Sprue}

Comments from Submitter:
Source: sealed set contents

Some further information about my set: it is the redesigned version with the
plates with pins. The 2x2 bricks were 3003old. The set must originally be from
Italy because there was a sticker on the box with Italian text that I'm assuming
says that it's not suitable for children under 36 months.

The following catalogs were included in the box:
 
Catalog No: c88eu2  Name: 1988 Medium European (101382/101482-EU-II (D/A/CH/F/I))
* 
c88eu2 1988 Medium European (101382/101482-EU-II (D/A/CH/F/I))
Catalogs: 1988
 
Catalog No: s88eu  Name: 1988 Medium Service Packs D/A/CH/I (102582/102682)
* 
s88eu 1988 Medium Service Packs D/A/CH/I (102582/102682)
Catalogs: 1988: Service Packs
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Sep 25, 2019 05:51
 Subject: Inventory Change Request for Set 6987-1
 Viewed: 20 times
 Topic: Inventories Requests (Entry)
 Status:Open
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
Please make changes to the following inventory:
 
Set No: 6987  Name: Message Intercept Base
* 
6987-1 (Inv) Message Intercept Base
538 Parts, 5 Minifigures, 1988
Sets: Space: Blacktron I

* Change 1 Part Black {2453 Brick 1 x 1 x 5 - Undetermined Stud Type to 2453a Brick 1 x 1 x 5 - Blocked Open Stud or Hollow Stud}
* Change {2 to 1} Part Black {4073 Plate, Round 1 x 1 Straight Side to 4073c01 Plate, Round 1 x 1, 2 on Sprue}
* Change {2 to 1} Part Trans-Red {4073 Plate, Round 1 x 1 Straight Side to 4073c01 Plate, Round 1 x 1, 2 on Sprue}

Comments from Submitter:
Source: sealed set contents
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Sep 23, 2019 10:31
 Subject: Inventory Change Request for Set 6155-1
 Viewed: 25 times
 Topic: Inventories Requests (Entry)
 Status:Open
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
Please make changes to the following inventory:
 
Set No: 6155  Name: Deep Sea Predator
* 
6155-1 (Inv) Deep Sea Predator
95 Parts, 1 Minifigure, 1 Gear, 1995
Sets: Aquazone: Aquasharks

* Add 1 Gear p95aqua (Not Applicable) Aquazone Poster, Large 1995 A2 (4.100.094/4.100.095-EU)

Comments from Submitter:
Poster was found in new set. One box seal was broken but all parts were still in sealed bags. So all contents were almost certainly originally in the box.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Sep 23, 2019 09:43
 Subject: Re: Inventory Change Request for Set 31098-1
 Viewed: 18 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, paulvdb writes:
  Please make changes to the following inventory:
 
Set No: 31098  Name: Outback Cabin
* 
31098-1 (Inv) Outback Cabin
297 Parts, 2 Minifigures, 2019
Sets: Creator: Model: Recreation

* Change 1 Part Dark Orange {33057 Turkey Drumstick, 20mm with Round Opening on Back to 42876 Turkey Drumstick, 22mm with Oval Opening on Back}

Comments from Submitter:
New part variant was not yet in the catalog when this set was inventoried. This Youtube video shows 42876 in this set: https://youtu.be/FA90099sjvc?t=70

Original submitter of this inventory parted this out in his store inventory, so we can't be 100% certain of the part variant in his set. But he checked and he does have 42876 in his store inventory which probably came from this set.

Screenshot from the Youtube video clearly shows the smooth bar of 42876. In the
other variants it is textured like the rest of the part.
 
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Sep 23, 2019 09:38
 Subject: Inventory Change Request for Set 31098-1
 Viewed: 26 times
 Topic: Inventories Requests (Entry)
 Status:Open
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
Please make changes to the following inventory:
 
Set No: 31098  Name: Outback Cabin
* 
31098-1 (Inv) Outback Cabin
297 Parts, 2 Minifigures, 2019
Sets: Creator: Model: Recreation

* Change 1 Part Dark Orange {33057 Turkey Drumstick, 20mm with Round Opening on Back to 42876 Turkey Drumstick, 22mm with Oval Opening on Back}

Comments from Submitter:
New part variant was not yet in the catalog when this set was inventoried. This Youtube video shows 42876 in this set: https://youtu.be/FA90099sjvc?t=70

Original submitter of this inventory parted this out in his store inventory, so we can't be 100% certain of the part variant in his set. But he checked and he does have 42876 in his store inventory which probably came from this set.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Sep 23, 2019 08:26
 Subject: Inventory Change Request for Set 6952-1
 Viewed: 22 times
 Topic: Inventories Requests (Entry)
 Status:Open
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
Please make changes to the following inventory:
 
Set No: 6952  Name: Solar Power Transporter
* 
6952-1 (Inv) Solar Power Transporter
268 Parts, 5 Minifigures, 1985
Sets: Space: Classic Space

* Delete 1 Part 4073 Trans-Yellow Plate, Round 1 x 1 Straight Side
* Delete 2 Part 4592c03 Blue Lever Small Base with Light Gray Lever
* Change 1 Minifig {sp052 Classic Space - White with Blue Jet Pack with Stud On Front to sp052a Classic Space - White with Blue Jet Pack}
* Change {14 to 12} Part Trans-Red 4589 Cone 1 x 1 without Top Groove

Comments from Submitter:
Adding new minifigure with complete jetpack and removing jetpack parts from set inventory.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Sep 23, 2019 08:07
 Subject: Inventory Change Request for Set 6952-1
 Viewed: 21 times
 Topic: Inventories Requests (Entry)
 Status:Open
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
Please make changes to the following inventory:
 
Set No: 6952  Name: Solar Power Transporter
* 
6952-1 (Inv) Solar Power Transporter
268 Parts, 5 Minifigures, 1985
Sets: Space: Classic Space

* Add 2 Part 3937c09 Black Hinge Brick 1 x 2 Base with Light Gray Hinge Brick 1 x 2 Top (3937 / 3938) (Counterpart)
* Add 1 Part 3937c09 Blue Hinge Brick 1 x 2 Base with Light Gray Hinge Brick 1 x 2 Top (3937 / 3938) (Counterpart)
* Change 4 Part Light Gray {3003 Brick 2 x 2 to 3003old Brick 2 x 2 without Inside Supports}

Comments from Submitter:
Found 3003old in my set.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Sep 23, 2019 03:16
 Subject: Inventory Change Request for Set BL19001-1
 Viewed: 20 times
 Topic: Inventories Requests (Entry)
 Status:Open
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
Please make changes to the following inventory:
 
Set No: BL19001  Name: Löwenstein Castle
* 
BL19001-1 (Inv) Löwenstein Castle
2002 Parts, 3 Minifigures, 2019
Sets: BrickLink Designer Program

* Change 1 Part Dark Orange {33057 Turkey Drumstick, 20mm with Round Opening on Back to 42876 Turkey Drumstick, 22mm with Oval Opening on Back}

Comments from Submitter:
Checked my set and found this new variant that was not in the catalog yet when this set was inventoried.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Sep 23, 2019 02:30
 Subject: Re: Inventory Change Request for Set 6373-1
 Viewed: 17 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, SezaR writes:
  In Inventories Requests, paulvdb writes:
  In Inventories Requests, SezaR writes:
  In Inventories Requests, SezaR writes:
  In Inventories Requests, SezaR writes:
  Please make changes to the following inventory:
 
Set No: 6373  Name: Motorcycle Shop
* 
6373-1 (Inv) Motorcycle Shop
163 Parts, 2 Minifigures, 1984
Sets: Town: Classic Town: Traffic

* Add 2 Part 3024 Yellow Plate 1 x 1
* Add 1 Part 3794a Yellow Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)
* Change {1 to 2} Part Red 3069b Tile 1 x 2 with Groove

Comments from Submitter:
I got a used copy in very good condition. Even the sprues are there. These parts were extra in the box. I found almost all of them on the models on back of the box.

- The yellow jumper can be seen in two models.
- Two yellow 1*1 plate can be seen on the ship (left-side top) Sorry for the
quality of the image. The yellow plates 4*1, 1*1 and 10*1 are used on each side
of the ship, on the edge.
- Two 1*2 red tiles are used on various red or yellow motorcycles.
- It is likely that on the bottom left-side of model, three yellow 1*1 plates
are used. But the box art is not clear.

I believe three yellow plates 1*1 came with this set. Whether the third is extra
is used on an alternate model is not clear.

Based on your photos the presence of the red 3069b and yellow 3794a is clearly
visible in the alternate models. Can you post photos showing a bit more detail
of the alternate models where the yellow 3024 are used? It would probably be
a bit better visible if you posted close-ups of just those models instead of
the whole back of the box.

Still difficult to see on those photos. Unfortunately those box art photos were
not always very clear. But I think I recognize the 1x1 plates. So I'll accept
this request.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Sep 22, 2019 13:08
 Subject: Re: Inventory Change Request for Set 7822-1
 Viewed: 21 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, paulvdb writes:
  In Inventories Requests, SezaR writes:
  In Inventories Requests, SezaR writes:
  Please make changes to the following inventory:
 
Set No: 7822  Name: Railway Station
* 
7822-1 (Inv) Railway Station
372 Parts, 3 Minifigures, 1980
Sets: Train: 4.5V

* Add 4 Part 3242 Light Gray Train, Track 12V Conducting Rail Straight

The source is from a NIB set sold on Ebay in Italy.
I have also seen used lots containing 4.5v sets+7822 and 4 extra conducting rails.

This set is advertised 4.5v in catalogs 1980-2 but TLG included 4 straight conducting
rails too so at the end, it was both working with either 4.5v or 12v layout.

I'm not convinced that this set would originally come with conducting rails.
It seems more likely that this seller would throw those rails in with the set
as a service for buyers who might want to use it with a 12V layout. I don't
remember my own set coming with these rails.

Earlier I wrote that I didn't remember my own set coming with conducting
rails. But I guess my memory was not perfect about this set that I got many years
ago. I was just cleaning up some drawers and at the bottom of one of them I found
some old notes that I thought I had lost.

In those notes I wrote some interesting and/or unexpected things I found in sealed
sets. One of those notes states that I found conducting rails in this set. So
I guess we now have another source of conducting rails in a NIB set.

Based on this I will accept the inventory change request, but as mentioned in
another post I will change the conducting rails to extras and I will also add
a note that these conducting rails did not come in all copies of the set.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Sep 22, 2019 07:42
 Subject: Re: Inventory Change Request for Set 702-1
 Viewed: 15 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, SezaR writes:
  In Inventories Requests, paulvdb writes:
  In Inventories Requests, Turez writes:
  Please make changes to the following inventory:
 
Set No: 702  Name: 12V Motor with Accessories Pack
* 
702-1 (Inv) 12V Motor with Accessories Pack
19 Parts, 1969
Sets: Train: Supplemental: 12V

* Delete 1 Part 2913 Blue Electric, Train Track Contact Base with Wire (97 cm)
* Delete 4 Part trainrim Light Gray Train Rim for 4.5V & 12V Locomotive Wheels
* Delete 4 Part wheel2a Red Train Wheel Spoked for Motor
* Add 4 Part wheel2ac01 Red Train Wheel Spoked for Motor with Black Train Rim for 4.5V & 12V Locomotive Wheels (wheel2a / trainrim)
* Change {2 to 1} Part Blue bb0236ac01 Electric, Connector, 2-Way Male Rounded Narrow Type 2 with Hollow Pins
* Change 1 Part Blue 2913c01 Electric, Train Track Contact Base with Wire (97 cm) and Connector {Counterpart to Regular}

Comments from Submitter:
From sealed set contents, Catawiki 29351443.

Nice found Turez
  
  
Since I don't know anything about the blue 12V train era (This set is exactly twice my age! ) I hope someone else can help here:

It's a bit before my time as well

  - Should the wheels with gray rims be alternate parts?

If I remember correctly someone did write something about the transition between
the two colors of rims in another change request for a set from that time. Probably
Reza because he knows a lot about these older train sets. I'll have to look
it up when I have some more time.

Maybe I know a lot, but I still feel I know nothing about these old sets

Based on what I know so far, TLG started to produce trainrims in black since
1969. I won't be surprised if I learn they produced them in 1968. -Maybe
they first used all their light gray ones in 1968 and then used the black ones
in mid 1968.) But based on my current knowledge and evidence, they produced them
since 1969 and I think we can remove the light gray ones for these set and any
other set released between 1969-79.

I have photos of three sealed copies, all coming with black trainrims. See photos
attached. We can read the production dates of motors as follows:
28 7 69 (source: Bluxe) See photos 2 and 3
23 2 69 (source: Facebook) See photo 4
25 7 69 (source: from a Lego collector) See photo 5
16 2 70 (source: Catawiki) See photo 1

This gives a good evidence that we can remove light gray trainrims (but there
is still a tiny chance that the very early releases came with light gray ones.)

  
  - What is the wire with two connectors for? The photo shows it with 1x bb0236ac01 and 1x bb0093ac01, but the catalog image shows 2x bb0236ac01.

I think the catalog image is taken from a Lego catalog. It shows also 1x bb0236ac01
and 1x bb0093ac01 but in the image we can only see bb0093ac01
|p=bb0236ac01]
from its side so this is why it looks like bb0236ac01
 
Part No: bb0236ac01  Name: Electric, Connector, 2-Way Male Rounded Narrow Type 2 with Hollow Pins
* 
bb0236ac01 Electric, Connector, 2-Way Male Rounded Narrow Type 2 with Hollow Pins
Parts: Electric, Wire & Connector

  
Probably for when you use the motor to build a car instead of a train. You can
see that the set includes the necessary wheels and tires for that. The train
track contact base is used to connect to the conducting rails when you use the
motor for a train, but when using it is a car you'd need a wire with two
connectors to connect it to the transformer. It appears that transformer 740
needs the bb093ac01 connector while the bb0236ac01 connector would go in the
motor.


Correct. This is what TLG did with other Lego train accessories or even Lego
trains. See for example the inventory of
 
Set No: 122  Name: Loco and Tender
* 
122-1 (Inv) Loco and Tender
96 Parts, 1969
Sets: Train: 4.5V

  Based on that it seems that the wire with two different connectors should be
correct for this set, but I am not familiar enough with the sets from that time
to be completely confident about that. Especially when the box art shows a wire
with two connectors bb0236ac01. So I would appreciate input from people more
familiar with these sets from the late 1960s.

Yes, it is correct. This set comes with two wire/connector assemblies. These
changes can be accepted but based on the photos that I have on my PC, it seems
the length of the two wires are different. Moreover, then length of wires, the
name of the items and maybe even the item should be changed! We still need to
wait until the catalog admins can have free time for the project map for wires
then we can make better changes for these sets.

Thanks for your reply. Based on your research we can remove the wheels with light
gray rims from this inventory. They can always be added again if someone finds
evidence that they were included in some very early releases of this set.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Sep 21, 2019 03:56
 Subject: Re: Inventory Change Request for Set 70816-1
 Viewed: 19 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, Mischarktopus writes:
  Please make changes to the following inventory:
 
Set No: 70816  Name: Benny's Spaceship, Spaceship, SPACESHIP!
* 
70816-1 (Inv) Benny's Spaceship, Spaceship, SPACESHIP!
889 Parts, 7 Minifigures, 2014
Sets: The LEGO Movie

* Change {8 to 10} Part Blue 3023 Plate 1 x 2

Comments from Submitter:
All 10 are required for building this set. The correct quantity is also listed at the end of the paper instructions book.

Two of them are in the inventories of the droid minifigures tlm088 and tlm089.
That means that there are already ten in the inventory of this set (use the break
minifigures option to check that) so this request will be rejected.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Sep 19, 2019 03:54
 Subject: Inventory Change Request for Set 10223-1
 Viewed: 23 times
 Topic: Inventories Requests (Entry)
 Status:Open
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
Please make changes to the following inventory:
 
Set No: 10223  Name: Kingdoms Joust
* 
10223-1 (Inv) Kingdoms Joust
1533 Parts, 9 Minifigures, 2012
Sets: Castle: Kingdoms

* Change 2 Part Red {2453 Brick 1 x 1 x 5 - Undetermined Stud Type to 2453a Brick 1 x 1 x 5 - Blocked Open Stud or Hollow Stud}

Comments from Submitter:
From set in my personal collection.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Sep 19, 2019 03:54
 Subject: Re: Inventory Change Request for Set 10223-1
 Viewed: 14 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, Turez writes:
  Unfortunatly I didn't find any photos showing 2453a in red.

I remember that 2453b was approved to the catalog shortly after I inventoried
this set. Sets that I parted out and one for my personal collection had a mix
of both types in all colors. The one that I still have in my personal collection
has red 2453a. I'll submit a change request for it.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Sep 17, 2019 09:11
 Subject: Re: Inventory Change Request for Set 9648-1
 Viewed: 15 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, xoshimin writes:
  Please make changes to the following inventory:
 
Set No: 9648  Name: Mindstorms Education Resource Set
* 
9648-1 (Inv) Mindstorms Education Resource Set
672 Parts, 4 Gear, 2006
Sets: Educational & Dacta: MINDSTORMS: NXT

* Add 1 Part x90 Yellow Rubber Belt Extra Large (Round Cross Section) - Approx. 5 x 5 (Alternate) (match ID 7)
* Change 2 Part Yellow x89 Rubber Belt Large (Round Cross Section) - Approx. 4 x 4 {Regular to Alternate} {match ID 0 to 7}

There were originally 2x x89 in this inventory. You added 1x x90. Should that
be 2? Or was there only 1 in this set?
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Sep 16, 2019 23:04
 Subject: Re: Inventory Change Request for Set 6373-1
 Viewed: 27 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, SezaR writes:
  In Inventories Requests, SezaR writes:
  In Inventories Requests, SezaR writes:
  Please make changes to the following inventory:
 
Set No: 6373  Name: Motorcycle Shop
* 
6373-1 (Inv) Motorcycle Shop
163 Parts, 2 Minifigures, 1984
Sets: Town: Classic Town: Traffic

* Add 2 Part 3024 Yellow Plate 1 x 1
* Add 1 Part 3794a Yellow Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)
* Change {1 to 2} Part Red 3069b Tile 1 x 2 with Groove

Comments from Submitter:
I got a used copy in very good condition. Even the sprues are there. These parts were extra in the box. I found almost all of them on the models on back of the box.

- The yellow jumper can be seen in two models.
- Two yellow 1*1 plate can be seen on the ship (left-side top) Sorry for the
quality of the image. The yellow plates 4*1, 1*1 and 10*1 are used on each side
of the ship, on the edge.
- Two 1*2 red tiles are used on various red or yellow motorcycles.
- It is likely that on the bottom left-side of model, three yellow 1*1 plates
are used. But the box art is not clear.

I believe three yellow plates 1*1 came with this set. Whether the third is extra
is used on an alternate model is not clear.

Based on your photos the presence of the red 3069b and yellow 3794a is clearly
visible in the alternate models. Can you post photos showing a bit more detail
of the alternate models where the yellow 3024 are used? It would probably be
a bit better visible if you posted close-ups of just those models instead of
the whole back of the box.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Sep 16, 2019 00:17
 Subject: Re: Inventory Change Request for Set 9499-1
 Viewed: 16 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, mgiglio writes:
  Please make changes to the following inventory:
 
Set No: 9499  Name: Gungan Sub
* 
9499-1 (Inv) Gungan Sub
449 Parts, 4 Minifigures, 2012
Sets: Star Wars: Star Wars Episode 1

* Change {8 to 14} Part Trans-Orange 4073 Plate, Round 1 x 1 Straight Side

Comments from Submitter:
'm not sure i'm submitting this correctly, but what I am trying to accomplish is changing inventory of set 9499 for part 4073 in trans-orange from 8 to 14.

i have built this set twice. both times instructions called for 14 trans-orange 4073.

Are there different versions of instructions for this set? I just did a quick
glance through the instructions that I found at Brick set and only found 8.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Sep 15, 2019 15:47
 Subject: Re: Inventory Change Request for Set 702-1
 Viewed: 26 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, Turez writes:
  Please make changes to the following inventory:
 
Set No: 702  Name: 12V Motor with Accessories Pack
* 
702-1 (Inv) 12V Motor with Accessories Pack
19 Parts, 1969
Sets: Train: Supplemental: 12V

* Delete 1 Part 2913 Blue Electric, Train Track Contact Base with Wire (97 cm)
* Delete 4 Part trainrim Light Gray Train Rim for 4.5V & 12V Locomotive Wheels
* Delete 4 Part wheel2a Red Train Wheel Spoked for Motor
* Add 4 Part wheel2ac01 Red Train Wheel Spoked for Motor with Black Train Rim for 4.5V & 12V Locomotive Wheels (wheel2a / trainrim)
* Change {2 to 1} Part Blue bb0236ac01 Electric, Connector, 2-Way Male Rounded Narrow Type 2 with Hollow Pins
* Change 1 Part Blue 2913c01 Electric, Train Track Contact Base with Wire (97 cm) and Connector {Counterpart to Regular}

Comments from Submitter:
From sealed set contents, Catawiki 29351443.

Since I don't know anything about the blue 12V train era (This set is exactly twice my age! ) I hope someone else can help here:

It's a bit before my time as well

  - Should the wheels with gray rims be alternate parts?

If I remember correctly someone did write something about the transition between
the two colors of rims in another change request for a set from that time. Probably
Reza because he knows a lot about these older train sets. I'll have to look
it up when I have some more time.

  - What is the wire with two connectors for? The photo shows it with 1x bb0236ac01 and 1x bb0093ac01, but the catalog image shows 2x bb0236ac01.

Probably for when you use the motor to build a car instead of a train. You can
see that the set includes the necessary wheels and tires for that. The train
track contact base is used to connect to the conducting rails when you use the
motor for a train, but when using it is a car you'd need a wire with two
connectors to connect it to the transformer. It appears that transformer 740
needs the bb093ac01 connector while the bb0236ac01 connector would go in the
motor.

Based on that it seems that the wire with two different connectors should be
correct for this set, but I am not familiar enough with the sets from that time
to be completely confident about that. Especially when the box art shows a wire
with two connectors bb0236ac01. So I would appreciate input from people more
familiar with these sets from the late 1960s.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Sep 14, 2019 12:36
 Subject: Inventory Change Request for Set 75810-1
 Viewed: 20 times
 Topic: Inventories Requests (Entry)
 Status:Open
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
Please make changes to the following inventory:
 
Set No: 75810  Name: The Upside Down
* 
75810-1 (Inv) The Upside Down
2254 Parts, 8 Minifigures, 2019
Sets: Stranger Things

* Add 2 Part 44302b Light Bluish Gray Hinge Plate 1 x 2 Locking with 2 Fingers on End without Bottom Groove (Alternate) (match ID 2)
* Change 2 Part Light Bluish Gray 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove {match ID 0 to 2}

Comments from Submitter:
My set has 44302b
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Sep 14, 2019 06:44
 Subject: Inventory Change Request for Set 75810-1
 Viewed: 28 times
 Topic: Inventories Requests (Entry)
 Status:Open
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
Please make changes to the following inventory:
 
Set No: 75810  Name: The Upside Down
* 
75810-1 (Inv) The Upside Down
2254 Parts, 8 Minifigures, 2019
Sets: Stranger Things

* Add 2 Part 2436c Medium Dark Flesh Bracket 1 x 2 - 1 x 4 with Two Rounded Corners at the Bottom (Alternate) (match ID 2)
* Change 2 Part Medium Dark Flesh 2436b Bracket 1 x 2 - 1 x 4 with Rounded Corners {match ID 0 to 1}

Comments from Submitter:
My set has 2436c
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Sep 13, 2019 05:12
 Subject: Re: We have a new Catalog Associate!
 Viewed: 61 times
 Topic: Catalog
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Catalog, Admin_Russell writes:
  Hello everyone,

I'm very pleased to announce that we have appointed longtime member BricksThatStick
to the Catalog Associate position. Paul served as the site's 4th Inventories
Admin during 2010 to 2011 alongside Emma (SimplyBricks). He effectively replaced
Dan Jezek, the site's founder, who had a special fondness for inventories
work and who of course left very big shoes to fill.

If you take the time to scroll through Paul's 900+ inventories changes:

https://www.bricklink.com/catalogInvChangeItem.asp?chgUserID=44744&v=3

...you will notice a sea of green, followed by a sea of blue, followed by another
sea of green. This means he continued to contribute to the catalog after having
once been an admin, which is (unfortunately) something rather uncommon. But it
demonstrates a great and correct attitude, the kind of attitude we wish to model
for all of our other contributors out there, especially the ones still cutting
their teeth.

Paul has, over the years, been very active as a seller and many of you will know
him also from his activity in the Forum. We look forward to his practical insights
and we are confident he will play a vital role in our growing catalog team.

Please welcome him back!

Russell

Congrats and welcome.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Sep 12, 2019 09:21
 Subject: Re: Inventory Change Request for Set 76086-1
 Viewed: 18 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, paulvdb writes:
  In Inventories Requests, paulvdb writes:
  In Inventories Requests, Ladyhawke74 writes:
  Please make changes to the following inventory:
 
Set No: 76086  Name: Knightcrawler Tunnel Attack
* 
76086-1 (Inv) Knightcrawler Tunnel Attack
602 Parts, 4 Minifigures, 2017
Sets: Super Heroes: Justice League

* Add 2 Part 44225pb001a Light Bluish Gray Technic Rotation Joint Disk with Pin and 3L Liftarm Thick with Vents and Red Rectangle Pattern Side A (Sticker) - Set 76086 (Counterpart)
* Add 2 Part 44225pb001b Light Bluish Gray Technic Rotation Joint Disk with Pin and 3L Liftarm Thick with Vents and Red Rectangle Pattern Side B (Sticker) - Set 76086 (Counterpart)
* Add 1 Part 3010pb274 Black Brick 1 x 4 with Grille and Red Headlights Pattern (Sticker) - Set 76086 (Counterpart)
* Add 1 Part 63864pb083 Yellow Tile 1 x 3 with Red Gauges and Buttons Pattern (Sticker) - Set 76086 (Counterpart)
* Add 1 Part 63864pb084 Yellow Tile 1 x 3 with Red Level Meter Pattern (Sticker) - Set 76086 (Counterpart)

Looks like the sticker is applied upside down on the image of 3010pb274.

Stickers are also wrong on 44225pb001a and 44225pb001b. Stickers should be switched
between the two parts based on set images and instructions.

It also looks like technic half pins were left in the 44225 in both images.

I see that new images have been added to these part with stickers applied correctly.
I have accepted these request now that the images are correct.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Sep 12, 2019 09:18
 Subject: Re: Inventory Change Request for Set 7823-1
 Viewed: 18 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, SezaR writes:
  In Inventories Requests, paulvdb writes:
  In Inventories Requests, SezaR writes:
  Please make changes to the following inventory:
 
Set No: 7823  Name: Container Crane Depot
* 
7823-1 (Inv) Container Crane Depot
467 Parts, 2 Minifigures, 1986
Sets: Train: 12V

* Add 2 Part 3242c Light Gray Train, Track 12V Conducting Rail Straight without Cable Connection Holes (Alternate) (match ID 2)
* Add 1 Part 3070b Red Tile 1 x 1 with Groove (3070) (Extra)
* Add 1 Part 3003old White Brick 2 x 2 without Inside Supports (match ID 5)
* Add 3 Part 3003old Red Brick 2 x 2 without Inside Supports (match ID 4)
* Add 2 Part 3002old Red Brick 2 x 3 without Cross Supports (match ID 6)
* Change 2 Part Light Gray 3242 Train, Track 12V Conducting Rail Straight {match ID 0 to 2}
* Change 1 Part White 3003 Brick 2 x 2 {Regular to Alternate} {match ID 0 to 5}
* Change 3 Part Red 3003 Brick 2 x 2 {Regular to Alternate} {match ID 0 to 4}
* Change 2 Part Red 3002 Brick 2 x 3 {Regular to Alternate} {match ID 0 to 6}

Comments from Submitter:
The evidence will be uploaded soon.

Did you forget to upload the evidence?

Hi Paul,

No I didn't forget. There are so many inv. changes, catalog changes, adding
items,...that I have plans to submit, take photos, upload them to my PC, and
then, upload them on BL. The only way I can handle all these is to do them step
by step, as my time allows me.

This NIB copy that I purchased should be from 1988 since the box is the first
version (1986-8) and the straight conducting rails don't have holes and have
reinforcements under their notches (1988-90).
I have never seen light gray hinges with solid stud with this set. I even have
one used copy that I bought from the first owner and was an early release too.
The (light gray) hinges with hollow studs were produced since very early 1985
https://www.bricklink.com/messageThread.asp?ID=235359
So I think we should remove them from this set. If we find a reliable source
that they were used for this set, then they should come back, but I doubt.

The length of the wire in this set
 
Part No: x77ac75  Name: String, Cord Thin    75cm
* 
x77ac75 String, Cord Thin 75cm
Parts: String & Net
is 76cm.

Sorry it took me a while to get back to this request. My own set was in a location
that was a bit inconvenient to reach. I was planning to reorganize a bit here
so was planning to use that opportunity to check my set. But it took longer than
I expected to finally get around to that.

I can confirm that my set has the 3002old and 3003old. Also the 3242c and 4081b.
I had already added 4081b in blue as alternate long ago. I guess at that time
I forgot to add it in red because someone else added it later. But my set has
4081b in both colors.

For the solid stud hinges it seems very likely that they never came in this set.
The only other sets with them in light gray are from 1983 and none of the sets
from 1985 have them in their inventories so it seems unlikely that they would
suddenly show up again in 1986. So I think they can be removed.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Sep 10, 2019 15:34
 Subject: Re: Inventory Change Request for Set 76086-1
 Viewed: 18 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, paulvdb writes:
  In Inventories Requests, Ladyhawke74 writes:
  Please make changes to the following inventory:
 
Set No: 76086  Name: Knightcrawler Tunnel Attack
* 
76086-1 (Inv) Knightcrawler Tunnel Attack
602 Parts, 4 Minifigures, 2017
Sets: Super Heroes: Justice League

* Add 2 Part 44225pb001a Light Bluish Gray Technic Rotation Joint Disk with Pin and 3L Liftarm Thick with Vents and Red Rectangle Pattern Side A (Sticker) - Set 76086 (Counterpart)
* Add 2 Part 44225pb001b Light Bluish Gray Technic Rotation Joint Disk with Pin and 3L Liftarm Thick with Vents and Red Rectangle Pattern Side B (Sticker) - Set 76086 (Counterpart)
* Add 1 Part 3010pb274 Black Brick 1 x 4 with Grille and Red Headlights Pattern (Sticker) - Set 76086 (Counterpart)
* Add 1 Part 63864pb083 Yellow Tile 1 x 3 with Red Gauges and Buttons Pattern (Sticker) - Set 76086 (Counterpart)
* Add 1 Part 63864pb084 Yellow Tile 1 x 3 with Red Level Meter Pattern (Sticker) - Set 76086 (Counterpart)

Looks like the sticker is applied upside down on the image of 3010pb274.

Stickers are also wrong on 44225pb001a and 44225pb001b. Stickers should be switched
between the two parts based on set images and instructions.

It also looks like technic half pins were left in the 44225 in both images.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Sep 10, 2019 15:31
 Subject: Re: Inventory Change Request for Set 76086-1
 Viewed: 16 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, Ladyhawke74 writes:
  Please make changes to the following inventory:
 
Set No: 76086  Name: Knightcrawler Tunnel Attack
* 
76086-1 (Inv) Knightcrawler Tunnel Attack
602 Parts, 4 Minifigures, 2017
Sets: Super Heroes: Justice League

* Add 2 Part 44225pb001a Light Bluish Gray Technic Rotation Joint Disk with Pin and 3L Liftarm Thick with Vents and Red Rectangle Pattern Side A (Sticker) - Set 76086 (Counterpart)
* Add 2 Part 44225pb001b Light Bluish Gray Technic Rotation Joint Disk with Pin and 3L Liftarm Thick with Vents and Red Rectangle Pattern Side B (Sticker) - Set 76086 (Counterpart)
* Add 1 Part 3010pb274 Black Brick 1 x 4 with Grille and Red Headlights Pattern (Sticker) - Set 76086 (Counterpart)
* Add 1 Part 63864pb083 Yellow Tile 1 x 3 with Red Gauges and Buttons Pattern (Sticker) - Set 76086 (Counterpart)
* Add 1 Part 63864pb084 Yellow Tile 1 x 3 with Red Level Meter Pattern (Sticker) - Set 76086 (Counterpart)

Looks like the sticker is applied upside down on the image of 3010pb274.

Stickers are also wrong on 44225pb001a and 44225pb001b. Stickers should be switched
between the two parts based on set images and instructions.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Sep 9, 2019 10:35
 Subject: Re: Inventory Change Request for Set 8641-1
 Viewed: 43 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, stergann writes:
  Please make changes to the following inventory:
 
Set No: 8641  Name: Flame Glider
* 
8641-1 (Inv) Flame Glider
54 Parts, 2005
Sets: Racers: Tiny Turbos

* Add 1 Part 6091pb017 Orange Brick, Modified 1 x 2 x 1 1/3 with Curved Top with '2' on Checkered Background Pattern (Sticker) - Set 8641 (Counterpart)

Based on instructions, set images and image of the stickersheet I believe that
the wrong sticker is applied on [p=6091pb017]

This is the same sticker that is also on [p=3069bpb085]

Looking at the sticker sheet
 
Part No: 8641stk01  Name: Sticker Sheet for Set 8641 - (51896/4245775)
* 
8641stk01 Sticker Sheet for Set 8641 - (51896/4245775)
Parts: Sticker Sheet
it is the second sticker from the
left in the top row. The correct sticker should be the one all the way to the
right on the top row and that sticker also partially goes on a black 1x1 plate.
So a stickered assembly should be added to the catalog for that sticker.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Sep 6, 2019 00:00
 Subject: Re: Inventory Change Request for Set 7942-1
 Viewed: 17 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, Petar_416 writes:
  Please make changes to the following inventory:
 
Set No: 7942  Name: Off Road Fire Rescue
* 
7942-1 (Inv) Off Road Fire Rescue
127 Parts, 1 Minifigure, 2007
Sets: Town: City: Fire

* Delete 1 Part 3730 Light Bluish Gray Plate, Modified 2 x 2 with Towball Socket, Short, 4 Slots (match ID 1)
* Add 1 Part 63082 Light Bluish Gray Plate, Modified 2 x 2 with Towball Socket, Short, Flattened with Holes and Axle Hole in Center

This part is already included in the alternate items section of the inventory.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Sep 5, 2019 23:59
 Subject: Re: Inventory Change Request for Set 10733-1
 Viewed: 15 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, Petar_416 writes:
  Please make changes to the following inventory:
 
Set No: 10733  Name: Mater's Junkyard
* 
10733-1 (Inv) Mater's Junkyard
25 Parts, 1 Minifigure, 2017
Sets: Juniors: Cars: Cars 3

* Add 1 Part 30386 Reddish Brown Hinge Brick 1 x 2 Locking with 1 Finger Vertical End and 2 Fingers Vertical End

Comments from Submitter:
Part is missing in the list.

This part is included in the minifigure inventory for
 
Minifig No: crs016  Name: Tow Mater - Hinges Boom
* 
crs016 (Inv) Tow Mater - Hinges Boom
Minifigures: Cars: Cars 3
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Sep 5, 2019 04:02
 Subject: Re: Inventory Change Request for Set 088-1
 Viewed: 31 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, SezaR writes:
  Please make changes to the following inventory:
 
Set No: 088  Name: Super Set
* 
088-1 (Inv) Super Set
614 Parts, 1969
Sets: Universal Building Set: Basic Set

* Delete 1 Part 3404ac02 White Turntable 4 x 4 - Old Type Complete, Faceted with Indented Base
* Add 1 Part 3404ac01 White Turntable 4 x 4 - Old Type Complete, Faceted

The person who inventoried the set confirmed that 3404ac01 should be in this
set. See https://www.bricklink.com/message.asp?ID=1155688
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Sep 3, 2019 15:24
 Subject: Re: Inventory Change Request for Set 5973-1
 Viewed: 22 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, bricks_canada writes:
  Please make changes to the following inventory:
 
Set No: 5973  Name: Hyperspeed Pursuit
* 
5973-1 (Inv) Hyperspeed Pursuit
442 Parts, 3 Minifigures, 2009
Sets: Space: Space Police III

* Add 2 Part 2431pb151 Black Tile 1 x 4 with Gray Circles and Rectangles Pattern (Sticker) - Set 5973 (Counterpart)

Comments from Submitter:
this part with the sticker is of quantity: 2

Thanks for bringing this to our attention. But the correct procedure would be
to change the quantity of the existing lot to 2. I have done that for you.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Sep 3, 2019 15:19
 Subject: Re: Inventory Change Request for Set 70012-1
 Viewed: 17 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, samsam2 writes:
  Please make changes to the following inventory:
 
Set No: 70012  Name: Rubber Bands
* 
70012-1 (Inv) Rubber Bands
20 Parts, 1985
Sets: Service Packs: Technic

* Add 1 Part 61678pb112R Dark Bluish Gray Slope, Curved 4 x 1 No Studs with Dark Red Curved Tube and Hull Plates Pattern Model Right Side (Sticker) - Set 70012 (Counterpart)

This counterpart does not look right for this set. I'm assuming it should
be in set
 
Set No: 70012  Name: Razar's CHI Raider
* 
70012-2 (Inv) Razar's CHI Raider
382 Parts, 3 Minifigures, 2013
Sets: LEGENDS OF CHIMA
Please submit the request again for that set.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Aug 27, 2019 03:41
 Subject: Re: Inventory Change Request for Set 398-1
 Viewed: 32 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, SezaR writes:
  In Inventories Requests, paulvdb writes:
  In Inventories Requests, anathema writes:
  In Inventories Requests, SezaR writes:
  In Inventories Requests, anathema writes:
  Please make changes to the following inventory:
 
Set No: 398  Name: U.S.S. Constellation
* 
398-1 (Inv) U.S.S. Constellation
978 Parts, 1 Gear, 1978
Sets: Hobby Sets

* Change 52 Part Light Gray {3062b Brick, Round 1 x 1 Open Stud to 3062a Brick, Round 1 x 1 Solid Stud}

Comments from Submitter:
The set originally came with the older type of this part

I bought this set with box and everything from Germany few months ago. I can
say the parts are original. Some are yellowed. And yes, all the light gray round
bricks were solid stud. Did the previous owner or owners replaced all 52 open
stud 3062b with solid studs 3062a? All the 52 copies of them? I don't know
if the submitter have an original copy of this set coming with light gray 3062a,
but I believe this inventory change request is correct.

Mine, like yours, was bought recently with box etc and - for the most part -
the correct vintage of parts. Also, so far as I am aware, 3062b didn't appear
before 1979, so while it's possible this set was packed with 3062b at some
point during its lifetime, it would originally have had 3062a.

Based on year of release I believe that this set must have originally come with
3062a. And it is a very rare part in light gray, so I doubt that someone would
have switched them all out in both of your used sets. It is possible that later
releases of the set came with 3062b, but we can always add it back later as an
alternate if that is the case. For now I am inclined to accept this request,
but I'll leave it open for a day or two to give other owners of this set
the chance to tell us if they found 3062b in their sets.

https://www.bricklink.com/message.asp?ID=1076924

Thanks for that link. So now we know that both variants came in this set. I'll
accept this request to change the regular part to 3062a and I'll add 3062b
as alternate.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Aug 26, 2019 02:49
 Subject: Re: Inventory Change Request for Set 398-1
 Viewed: 36 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, anathema writes:
  In Inventories Requests, SezaR writes:
  In Inventories Requests, anathema writes:
  Please make changes to the following inventory:
 
Set No: 398  Name: U.S.S. Constellation
* 
398-1 (Inv) U.S.S. Constellation
978 Parts, 1 Gear, 1978
Sets: Hobby Sets

* Change 52 Part Light Gray {3062b Brick, Round 1 x 1 Open Stud to 3062a Brick, Round 1 x 1 Solid Stud}

Comments from Submitter:
The set originally came with the older type of this part

I bought this set with box and everything from Germany few months ago. I can
say the parts are original. Some are yellowed. And yes, all the light gray round
bricks were solid stud. Did the previous owner or owners replaced all 52 open
stud 3062b with solid studs 3062a? All the 52 copies of them? I don't know
if the submitter have an original copy of this set coming with light gray 3062a,
but I believe this inventory change request is correct.

Mine, like yours, was bought recently with box etc and - for the most part -
the correct vintage of parts. Also, so far as I am aware, 3062b didn't appear
before 1979, so while it's possible this set was packed with 3062b at some
point during its lifetime, it would originally have had 3062a.

Based on year of release I believe that this set must have originally come with
3062a. And it is a very rare part in light gray, so I doubt that someone would
have switched them all out in both of your used sets. It is possible that later
releases of the set came with 3062b, but we can always add it back later as an
alternate if that is the case. For now I am inclined to accept this request,
but I'll leave it open for a day or two to give other owners of this set
the chance to tell us if they found 3062b in their sets.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Aug 25, 2019 14:57
 Subject: Re: Inventory Change Request for Set 148-1
 Viewed: 22 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, SezaR writes:
  In Inventories Requests, SezaR writes:
  Please make changes to the following inventory:
 
Set No: 148  Name: Central Station
* 
148-1 (Inv) Central Station
266 Parts, 5 Minifigures, 1975
Sets: Train: 4.5V

* Delete 8 Part 3036 Light Gray Plate 6 x 8 (match ID 1)
* Delete 1 Part 3456 Light Gray Plate 6 x 14 (match ID 1)
* Change 7 Part Light Gray 3036 Plate 6 x 8 {Alternate to Regular} {match ID 1 to 0}
* Change 1 Part Light Gray 3033 Plate 6 x 10 {Alternate to Regular} {match ID 1 to 0}
* Change 1 Part Light Gray 3028 Plate 6 x 12 {Alternate to Regular} {match ID 1 to 0}

The box art clearly shows that one light gray
 
Part No: 3033  Name: Plate 6 x 10
* 
3033 Plate 6 x 10
Parts: Plate
and one light gray
 
Part No: 3028  Name: Plate 6 x 12
* 
3028 Plate 6 x 12
Parts: Plate
are used on the roof. I believe this is an evidence that the inventory of this
set was changed before the first production run as the box art shows it.
By the way, my neat used copy also confirm this. I think this inventory request
should be accepted and it is correct. If one day, somebody finds a reliable evidence
that this set came with the light gray plates shown in the instructions, then
we can switch this back (but I doubt)
If you need a high quality photo of the box, let me know.

I have looked at photos of used sets and did not find any with the 6x14 plate.
At least none where the photo quality was good enough to recognize the individual
plates. Some photos where very low quality so I could not determine which plates
were used in those sets.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Aug 25, 2019 14:32
 Subject: Re: Inventory Change Request for Set 648-1
 Viewed: 21 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, rjlmmaas writes:
  Please make changes to the following inventory:
 
Set No: 648  Name: Shell Service Station
* 
648-1 (Inv) Shell Service Station
42 Parts, 1971
Sets: LEGOLAND: Gas Station

* Delete 1 Part 3028 Light Gray Plate 6 x 12
* Add 1 Part 3456 Light Gray Plate 6 x 14

Comments from Submitter:
The 6x12 light gray plate should be replaced by a 6x14

What is your source for this request? Based on set images and instructions the
roof is made of one plate 6 x 12 and two plates 2 x 3.

This would also mean that plate 6 x 14 would have been produced a year earlier
than the oldest set that currently has it. I would like to see some convincing
evidence before I accept this request.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Aug 25, 2019 12:28
 Subject: Re: Excel
 Viewed: 28 times
 Topic: Inventories
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories, BarbaraH writes:
  In Inventories, BarbaraH writes:
  In Inventories, SylvainLS writes:
  In Inventories, BarbaraH writes:
  […]
  Colours are only numbers though. So you’ll need to import the colour table (same
form) to cross the tables.

Okay, this is obviously beyond my skill set. Anyone like to show me, preferably
via screen shots, exactly how to do this. Please.

For the first part:

1. Download the set inventory as Tab-delimited (should give you a “S-NNN-1.txt”
file).

2. Open Excel, open the file from Excel (or drag and drop it), it should give
you an import dialog where you can tweek things (delimiters, how numbers are
read, locale…) but you shouldn’t have to change anything because the tab-delimited
file is pretty simple/default.

You should now have the inventory in a table.


If you want to get colour names instead (or rather, besides) their code, well,
my Excel is a bit rusty (I use LibreOffice now) but this should do it:

1. Download the colour table as Tab-delimited (should give you a “colors.txt”
file).

2. Open it from Excel like above.

Note that it should be possible to cross/match from an external file but I’m
not sure how, so we’ll do it in one file, the one we have the inventory in.

3. Select and copy the first two columns (others are not needed).

4. Go back to the inventory file.

5. Create a new page (it’s cleaner) and paste the colours names and IDs.

6. Add a column in the inventory for the colour names.

7. Use the VLOOKUP function for the first item: “=VLOOKUP( E3 ; region ; 2 )”.
“E3” should be the cell with the colour code for the first item (line 3). “region”
is the whole region with the colours in the second page (e.g. “$Page2.A3.B217”).
“2” is because we want the value in the 2nd column, the colour name.

8. Add a $ before every value in the region (e.g. if it was “$Page2.A3.B217”,
make it “$Page2.$A$3.$B$217”). That will block the values (they won’t change
when the formula is moved or copy-pasted or dragged.

9. Apply the formula all the way down, for all the items by dragging the bottom-right
handle.

Now all the items have the colour code and names.



  Hope that’s clear and helping

It worked fine until point 7
Then I just got error messages.

=VLOOKUP(E3;"$Page2.$A$3.$B$217";2)that's my formula

Not sure if this works different in other language versions of Excel, but based
on how I work with formulas in my Dutch version of Excel I think the correct
version of that formula should be =VLOOKUP(E3;Page2!$A$3:$B$217;2;false)

The false at the end of the formula makes sure that it will only look for the
exact value in the list of colors. Otherwise it will use the nearest value if
your cell E3 has a value that's not in the list of colors.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Aug 25, 2019 03:15
 Subject: Re: Inventory Change Request for Set 10143-1
 Viewed: 20 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, Turez writes:
  In Inventories Requests, Noby writes:
  Please make changes to the following inventory:
 
Set No: 10143  Name: Death Star II - UCS
* 
10143-1 (Inv) Death Star II - UCS
3447 Parts, 2005
Sets: Star Wars: Ultimate Collector Series: Star Wars Episode 4/5/6

* Change 1 Part {Light Bluish Gray to Dark Bluish Gray} 41529 Hinge 1 x 3 Locking with 2 Fingers and Claw End

Comments from Submitter:
Part is listed in Light Bluish Gray but should be Dark Bluish Gray. See official Lego instructions, page 99.

I'd say this is an instructions error. Obviously the set came with a light
bluish gray part:
http://www.brickshelf.com/cgi-bin/gallery.cgi?i=2218051
http://www.brickshelf.com/cgi-bin/gallery.cgi?i=4195090
http://www.brickshelf.com/cgi-bin/gallery.cgi?i=3241738

Moreover, there is not a single one available in dbg.

I found photos of a few more and all of them had this part in light bluish gray.
So clearly an error in the instructions.
 Author: paulvdb View Messages Posted By paulvdb
 Posted: Aug 25, 2019 01:32
 Subject: Re: Inventory Change Request for Set 7641-1
 Viewed: 18 times
 Topic: Inventories Requests
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Inventories Requests, Turez writes:
  In Inventories Requests, paulvdb writes:
  In Inventories Requests, Turez writes:
  And there is another problem with this inventory: We have two alternate parts
which both have an extra part (paddle and claw). They are listed in different
ways at the moment and I don't know how to fix that. At least it is not possible
to add parts with a match ID to the extra items section (the match ID always
disappears).

I have fixed the entries for the paddles. The correct way to handle extras for
alternate items is a bit difficult to see in a set with so many alternates, so
I'll refer to another set that doesn't have as many. That should make
it a bit easier to see.

Thanks, I think I understand how it should be done. But, as said, it is not possible
for me to add match ID numbers to the extra items section.

That is correct. Only inventories admins can do that. So if this happens in other
sets you'll have to ask us to add the match ID.

  
  For part 48729b in set 7641 there is no extra in the inventory. There probably
should be, but we'd need confirmation from sealed set contents before we
can add it. Did you find 48729b in your set? And if you did, was there an extra?

Yes and yes.

Ok. I have added the extra 48729b to the inventory.

Next Page: 5 More | 10 More | 25 More | 50 More | 100 More