Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | Yogi_007  | | Posted: | Jan 11, 2020 05:30 | | Subject: | catalogue problem - zero lots showing up | | Viewed: | 87 times | | Topic: | Catalog | | Status: | Open | |
|
| Hi All,
Ive been looking for through the catalogue for various parts and have found that
some lots are coming up as zero available but still showing up for sale.
I was looking at 3700 technic 1x2 brick in dark green last week and the stores
showed up with zero in stock in the catalogue. I checked again today and all
resolved.
I then looked at orange part 6005 and same thing.
Whats going on ??
Seems off to me or is it related to these rarer parts ?
Help please
Yogi
|
|
 |
| Author: | HillbillyBricks | | Posted: | Jan 11, 2020 04:37 | | Subject: | Ability to identify parts for a specific set | | Viewed: | 90 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| How can you get a list of parts that you have in your inventory for a specific
set. In the price guide it will tell you how many parts you have in inventory
for a set. I want to knw what those parts are.
|
|
| Author: | DmitryD | | Posted: | Jan 10, 2020 12:21 | | Subject: | Taj Mahal 10256 too much extra parts? | | Viewed: | 113 times | | Topic: | Inventories | | Status: | Open | |
|
| Hi,
maybe it will sound strange but after a long, long break I've returned to
my youth craze and bought the Lego Taj MahaL.
Now it really matters to me to build by the instructions, means I want the build
to be 100% as intended. While I still haven't finished the build, I have
6 extra 1X1 transparent plate (3024). I've looked at the extra's inventory
on this site and damn it. I haven't seen those 6 extra parts listed
Now it drives me crazy, I retraced my steps but I haven't noticed that I
missed something. How that could be? is there a possibility the inventory list
on this site isn't right?
Thanks in advance!
|
|
| Author: | Syzyf | | Posted: | Jan 10, 2020 09:22 | | Subject: | Inventory Change Request for Set 7716-1 | | Viewed: | 30 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 32524 Black Technic, Liftarm 1 x 7 Thick
* Add 1 Part 40490 Black Technic, Liftarm 1 x 9 Thick
Comments from Submitter:
Liftarm Thick should be 1 x 9, not 1 x 7. For reference please check set instructions or peeron.
|
|
| Author: | BigHero6 | | Posted: | Jan 10, 2020 08:28 | | Subject: | Inventory 7730 | | Viewed: | 74 times | | Topic: | Inventories | | Status: | Open | |
|
| Hello, I have two Questions about the Inventory of the set 7730.
1. There are different Inventory-List in the Internet. Was there really a Cable
inside the box? Light Gray Electric, Wire 12V / 4.5V with four 1-prong connectors,
96 Studs Long
2. At the alternative Items there are 31 Light Gray Train, Track 12V Conducting
Rail Curved But must it nor be 15?
Thanks for the Answers
Is there anybody, who haves a picture of the Box Backside and Inside?
|
|
| Author: | gvbricks | | Posted: | Jan 10, 2020 05:34 | | Subject: | Inventory Change Request for Set 75261-1 | | Viewed: | 35 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 8 Part 2436c Black Bracket 1 x 2 - 1 x 4 with Two Rounded Corners at the Bottom (Alternate) (match ID 1)
* Change 8 Part Black 2436b Bracket 1 x 2 - 1 x 4 with Rounded Corners {match ID 0 to 1}
|
|
| Author: | wannes. | | Posted: | Jan 9, 2020 11:37 | | Subject: | Inventory Change Request for Set 138-1 | | Viewed: | 51 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part x870cc01 (Not Applicable) Electric, Train 4.5V Whistle Thin with Yellow Base (Alternate) (match ID 279878)
|
|
| Author: | waltzking | | Posted: | Jan 9, 2020 03:43 | | Subject: | Inventory Change Request for Minifig frnd318 | | Viewed: | 31 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part {Medium Dark Flesh to Flesh} FTFpb238c01 Torso Mini Doll Friends Dark Pink Swimsuit Top with Bright Light Yellow and Black Riffle Pattern, Medium Dark Flesh Arms with Hands
Comments from Submitter:
The color for this part is wrong in the catalog. It is 'flesh' not 'Medium Dark Flesh'.
|
|
| Author: | nzcam | | Posted: | Jan 8, 2020 21:45 | | Subject: | Search for parts from favourite sellers | | Viewed: | 52 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Via check-box option, It would be very handy to be able to restrict part searches
to just those sellers included in your favourite list, and separately to this,
those sellers you have open carts with.
This would be useful when adding to existing open orders (to save on shipping
or small batch orders) - If I know I'm already going to be placing orders
with Sellers A, B, C, & F, and I realise I need some more of a particular part,
being able to see which of those sellers have that part and what they're
chargning for it, is useful since I don't need to go back out to the wider
market (and shipping cost), AND I don't need to go to each open seller's
Store to search on them individually. One search does the trick.
|
|
| Author: | detroitbricks | | Posted: | Jan 8, 2020 18:32 | | Subject: | Help with pearl gold color | | Viewed: | 144 times | | Topic: | Colors | | Status: | Open | |
|
| I was going thru some used parts and noticed I have 2 different shades of pearl
gold. I see that the plate round 1x1 comes in pearl gold and pearl light gold.
Is pearl light gold real or is it the lighter shade of pearl gold listed as pearl
light gold? I have attached an image sorry if quality is terrible, the 3 on the
left are the darker shade pearl gold.
|
|
|
| Author: | Entropique | | Posted: | Jan 8, 2020 15:31 | | Subject: | Inventory Change Request for Set 803-2 | | Viewed: | 31 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part bb0301 Metallic Silver Technic, Axle Metal Short, for old Expert Builder Gears
Comments from Submitter:
This is the only Gear Set I own. I own none of the sets where this all-metal part is listed as included, but I know for sure the two I have came with this set.
|
|
| Author: | legofanit | | Posted: | Jan 8, 2020 05:38 | | Subject: | Inventory Change Request for Set 7760-1 | | Viewed: | 27 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* | | 7760-1 (Inv) Electric Diesel Locomotive (Diesel Shunter Locomotive)
144 Parts, 2 Minifigures, 1980
Sets: Train: 12V |
* Add 1 Part 4073c01 Trans-Red Plate, Round 1 x 1, 2 on Sprue (Extra)
* Add 1 Part 4073c01 Trans-Yellow Plate, Round 1 x 1, 2 on Sprue (Extra)
Comments from Submitter:
My 7760 has 2 4073c01 trans-red on sprue (1 used and 1 still new) and 2 4073c01 trans yellow on sprue (1 used and 1 still new).
My set was bought new in 1982 and I'm the first and only owner of this set.
|
|
| Author: | QNIKET8 | | Posted: | Jan 8, 2020 00:23 | | Subject: | Stores Need Attention | | Viewed: | 191 times | | Topic: | Catalog | | Status: | Open | |
|
| I am new to Bricklink. I recently decided to get out my lego to rebuild some
of my old Lego Star Wars sets. There were 2 sets I wanted to build but noticed
I was missing some pieces. I ordered two pieces last night (awaiting arrival)
for the first time, but then realised I needed more pieces for the other set.But
it says that 2 stores need my attention, why is that?
Thanks
|
|
| Author: | axaday | | Posted: | Jan 7, 2020 22:28 | | Subject: | Inventory Change Request for Set 2184-1 | | Viewed: | 24 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change {1 to 36} Part Black 3005 Brick 1 x 1
* Change {1 to 40} Part Black 3004 Brick 1 x 2
* Change {1 to 16} Part Black 3622 Brick 1 x 3
* Change {1 to 28} Part Black 3010 Brick 1 x 4
* Change {1 to 4} Part Black 3009 Brick 1 x 6
* Change {1 to 28} Part Black 3003 Brick 2 x 2
* Change {1 to 8} Part Black 3002 Brick 2 x 3
* Change {1 to 12} Part Black 3001 Brick 2 x 4
* Change {1 to 40} Part Blue 3005 Brick 1 x 1
* Change {1 to 46} Part Blue 3004 Brick 1 x 2
* Change {1 to 20} Part Blue 3622 Brick 1 x 3
* Change {1 to 34} Part Blue 3010 Brick 1 x 4
* Change {1 to 6} Part Blue 3009 Brick 1 x 6
* Change {1 to 32} Part Blue 3003 Brick 2 x 2
* Change {1 to 10} Part Blue 3002 Brick 2 x 3
* Change {1 to 18} Part Blue 3001 Brick 2 x 4
* Change {1 to 40} Part Red 3005 Brick 1 x 1
* Change {1 to 46} Part Red 3004 Brick 1 x 2
* Change {1 to 20} Part Red 3622 Brick 1 x 3
* Change {1 to 34} Part Red 3010 Brick 1 x 4
* Change {1 to 6} Part Red 3009 Brick 1 x 6
* Change {1 to 32} Part Red 3003 Brick 2 x 2
* Change {1 to 10} Part Red 3002 Brick 2 x 3
* Change {1 to 20} Part Red 3001 Brick 2 x 4
* Change {1 to 40} Part White 3005 Brick 1 x 1
* Change {1 to 46} Part White 3004 Brick 1 x 2
* Change {1 to 20} Part White 3622 Brick 1 x 3
* Change {1 to 34} Part White 3010 Brick 1 x 4
* Change {1 to 6} Part White 3009 Brick 1 x 6
* Change {1 to 32} Part White 3003 Brick 2 x 2
* Change {1 to 10} Part White 3002 Brick 2 x 3
* Change {1 to 18} Part White 3001 Brick 2 x 4
* Change {1 to 40} Part Yellow 3005 Brick 1 x 1
* Change {1 to 46} Part Yellow 3004 Brick 1 x 2
* Change {1 to 20} Part Yellow 3622 Brick 1 x 3
* Change {1 to 34} Part Yellow 3010 Brick 1 x 4
* Change {1 to 6} Part Yellow 3009 Brick 1 x 6
* Change {1 to 32} Part Yellow 3003 Brick 2 x 2
* Change {1 to 10} Part Yellow 3002 Brick 2 x 3
* Change {1 to 20} Part Yellow 3001 Brick 2 x 4
Comments from Submitter:
Sealed Set
|
|
| Author: | AZbrickGUY | | Posted: | Jan 7, 2020 22:11 | | Subject: | Batman Movie figures S1/2 | | Viewed: | 46 times | | Topic: | Catalog | | Status: | Open | |
|
| Is there anyway we can split up the two sets of minifigs from Batman movie lines??
Series 1 and 2 are all under one. Disney is 1 and 2 and not all together. I cant
help to fell that they should be, Batman Movie S1 and S2? Just sayin.
|
| Author: | Duq | | Posted: | Jan 7, 2020 19:47 | | Subject: | Element 6286835 wrong colour | | Viewed: | 114 times | | Topic: | Catalog | | Status: | Open | |
|
| | Element 6286835 is 28870 in black, not medium azure. |
| Author: | waltzking | | Posted: | Jan 7, 2020 18:49 | | Subject: | Alternate Images | | Viewed: | 79 times | | Topic: | Catalog | | Status: | Open | |
|
| Please add these alternate images for comparison of mini doll head patterns 37591
vs 66706 and also 37592 vs 66600 with new but similar print.
Jonathan
|
|
| Author: | normann1974 | | Posted: | Jan 7, 2020 11:25 | | Subject: | Broken part x191c01? | | Viewed: | 97 times | | Topic: | Catalog | | Status: | Open | |
|
| Should I be able to push all the way to the bottom with almost no
force when I cover up the hole, or does this mean that the part is broken? This
is the first small version I've had.
/Jan
|
| Author: | bb75359 | | Posted: | Jan 7, 2020 09:41 | | Subject: | New Payment Method | | Viewed: | 134 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Would it be possible to add another payment method.
Afterpay
Zip Pay
or at least have a blank one so that we can input our own custom method.
|
| Author: | normann1974 | | Posted: | Jan 6, 2020 18:48 | | Subject: | Remove image | | Viewed: | 115 times | | Topic: | Catalog | | Status: | Open | |
|
| For part
* | | 476 Bar 12L with Open Stud, Tow Ball, and Slit (Boat Mast)
Parts: Bar |
the image for Rust color should be removed. This part doesn't
exist in this color (but may appear rust colored as written in the note).
/Jan
|
|
| Author: | superca | | Posted: | Jan 6, 2020 15:10 | | Subject: | Inventory Change Request for Set 6444-1 | | Viewed: | 25 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3464 Trans-Clear Wheel Center Small with Stub Axles (Pulley Wheel)
Comments from Submitter:
Set 6444 inventory is missing this part. A counterpart in this set 3464c01 has this item as part if it's inventory so 3464 Trans-Clear Wheel Center small with Stub Axles (Pulley Wheel) is required to complete the set.
|
|
| Author: | Give.Me.A.Brick | | Posted: | Jan 6, 2020 14:18 | | Subject: | Instructions Dimensions -- way off? | | Viewed: | 69 times | | Topic: | Catalog | | Status: | Open | |
|
| On My Inventory the dimensions for set are 582mm x 378mm. Which is
the size of the Box itself (!)
How were these dimensions populated and what can I do to remove them altogether
(not just one by one)?
(Or better yet to mass-set the dimensions correctly.)
Thanhk you again.
|
| Author: | badlego | | Posted: | Jan 6, 2020 11:28 | | Subject: | Ability to search through order history | | Viewed: | 63 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| to enable me to see what I've already purchased, it would be good to search
my completed orders.
|
|
| Author: | calsbricks | | Posted: | Jan 6, 2020 10:04 | | Subject: | It's a funny old world we live in | | Viewed: | 296 times | | Topic: | Catalog | | Status: | Open | |
|
| For quite some time now there have been discussions on the forum about catalogue
changes as well as other areas of improvement to the site (Performance etc.).
There have been lots of different people involved and Russell has commented on
a couple of occasions but of course nothing is out in the open for plans at present
whilst the Lego takeover completes.
One thing I find strange and that is with all the talent (Programming wise) that
exists on the site, coupled with the technical Lego knowledge that also exists,
no one other than a couple of people have chimed in about getting some senior
analysts involved with a plan to redevelop. This is a very complex site but it
can be broken into segments |(elements) many of which can be handled by existing
software. For example the core processing behind the site is an order processing
system. We are aware of at least two products which could deal with that side
of it easily and have been built with 'linking in' other elements in
mind.
Inventory control, which in our opinion, is an essential element which has been
needed for some time is also out there and fits nicely into either of the two
above products. Again this needs an analyst to look at it and report to the decision
makers what needs to be done. It doesn't, with all due respect, require a
programmer to sit down and write the code first.
The catalogue is a different animal and needs a huge amount of thought. The data
currently held is priceless - not sure even Lego have it all, so that needs some
TLC and a significant amount of time spent to come up with the best way forward.
But, and it is a little word with a great big meaning here, the costs of doing
this are nowhere near outrageous and if libraries of code can be used e,g, order
processing, inventory control etc, then huge amounts of money and time can be
saved in achieving what is required.
The redevelopment of this site will not cost a fortune and it was well within
the means of the former owners to accomplish. They chose, for whatever reason,
not to do that - Lets hope that Lego will look at it differently.
Lets get behind hiring some senior analysts and get the project off the ground.
There was never a better time to start than now. With the strength of Lego and
its marketing machine behind the site who knows where we can go.
|
|
| Author: | graafie | | Posted: | Jan 6, 2020 08:09 | | Subject: | Sticker, LEGO.com/life Promotional (French) | | Viewed: | 60 times | | Topic: | Catalog | | Status: | Open | |
|
| New stickersheet to add.
Possible reference number:
"GSTK229"
Reference name:
"Sticker, LEGO.com/life Promotional (French)"
|
|
| Author: | MrLegoSeller | | Posted: | Jan 5, 2020 18:43 | | Subject: | Inventory Change Request for Set 8961-1 | | Viewed: | 26 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Lime {3684 Slope 75 2 x 2 x 3 - Undetermined Stud Type to 3684a Slope 75 2 x 2 x 3 - Hollow Studs}
|
|
| Author: | cosmicray | | Posted: | Jan 5, 2020 16:58 | | Subject: | Brand Identification stickers | | Viewed: | 98 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| One of the things that BrickLink needs, is better brand identification in the
larger community of potential buyers. It occurs to me that one way to work towards
this goal is to have BL logo stickers (I.e. The same icon contains the smiling
yellow face 2x2 brick logo). This type of sticker has been used by Apple, in
that one is included with every Apple product. Over the past ~20 years it has
been a white Apple with a bite missing, white the original incarnation was a
6-color Apple.
Our new benevolent overlords have extensive experience in producing stickers,
and presumably they have access to the ability to produce large quantities, that
we (the sellers) could include one with each order. Eventually, you would start
seeing them stuck on laptops and the rear windows of vehicles. Free advertising
for BL !
Thank you for your support.
Nita Rae
|
|
| Author: | Hygrotus | | Posted: | Jan 5, 2020 10:37 | | Subject: | Inventory Change Request for Set 70909-1 | | Viewed: | 17 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3069bpb756 Light Bluish Gray Tile 1 x 2 with Groove with Riptide Pattern (Sticker) - Set 70909 (Counterpart)
|
| Author: | Hygrotus | | Posted: | Jan 5, 2020 10:35 | | Subject: | Inventory Change Request for Set 60131-1 | | Viewed: | 17 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 93606pb099 Black Slope, Curved 4 x 2 with Red and Black Stripes Pattern (Sticker) - Set 60131 (Counterpart)
|
|
| Author: | Hygrotus | | Posted: | Jan 5, 2020 10:32 | | Subject: | Inventory Change Request for Set 76116-1 | | Viewed: | 13 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 22385pb181 Black Tile, Modified 2 x 3 Pentagonal with Batman Logo Pattern (Sticker) - Set 76116 (Counterpart)
* Add 1 Part 11477pb083L Black Slope, Curved 2 x 1 with Black and Yellow Danger Stripes Pattern Model Left Side (Sticker) - Set 76116 (Counterpart)
|
|
| Author: | Hygrotus | | Posted: | Jan 5, 2020 10:30 | | Subject: | Inventory Change Request for Set 10266-1 | | Viewed: | 17 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 30350bpb097 White Tile, Modified 2 x 3 with 2 Clips with American Flag Pattern (Sticker) - Set 10266 (Counterpart)
* Add 1 Part 11203pb047 White Tile, Modified 2 x 2 Inverted with Black Dots on Dark Bluish Gray Background Pattern (Sticker) - Set 10266 (Counterpart)
* Add 1 Part 6180pb121 Black Tile, Modified 4 x 6 with Studs on Edges with 'UNITED STATES' on White Background Pattern (Sticker) - Set 10266 (Counterpart)
* Add 2 Part 26603pb053 Black Tile 2 x 3 with Metallic Gold Triangle Pattern (Sticker) - Set 10266 (Counterpart)
* Add 1 Part 26603pb052 Black Tile 2 x 3 with Metallic Gold Square Pattern (Sticker) - Set 10266 (Counterpart)
* Add 1 Part 26603pb054 Black Tile 2 x 3 with American Flag on Metallic Gold Square Pattern (Sticker) - Set 10266 (Counterpart)
* Add 1 Part 6180pb122 Black Tile, Modified 4 x 6 with Studs on Edges with Metallic Gold Geometric Shape Pattern (Sticker) - Set 10266 (Counterpart)
* Add 1 Part 3068bpb1279 Black Tile 2 x 2 with Groove with Neil Armstrong Signature and Globe Pattern (Sticker) - Set 10266 (Counterpart)
* Add 2 Part 11203pb048 Light Bluish Gray Tile, Modified 2 x 2 Inverted with Black and White Machine Pattern 1 (Sticker) - Set 10266 (Counterpart)
* Add 2 Part 11203pb049 Light Bluish Gray Tile, Modified 2 x 2 Inverted with Black and White Machine Pattern 2 (Sticker) - Set 10266 (Counterpart)
* Add 2 Part 11203pb050 Light Bluish Gray Tile, Modified 2 x 2 Inverted with Black Dots Pattern (Sticker) - Set 10266 (Counterpart)
* Add 1 Part 3068bpb1280 Dark Bluish Gray Tile 2 x 2 with Groove with Lunar Lander Control and Circuitry Panel Pattern (Sticker) - Set 10266 (Counterpart)
* Add 1 Part 87079pb658 Light Bluish Gray Tile 2 x 4 with Lunar Lander Hull Plates Pattern 1 (Sticker) - Set 10266 (Counterpart)
* Add 1 Part 87079pb659 Light Bluish Gray Tile 2 x 4 with Lunar Lander Hull Plates Pattern 2 (Sticker) - Set 10266 (Counterpart)
|
|
| Author: | Hygrotus | | Posted: | Jan 5, 2020 10:15 | | Subject: | Inventory Change Request for Set 8184-1 | | Viewed: | 17 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 6091pb018L Red Brick, Modified 1 x 2 x 1 1/3 with Curved Top with Number 17 Pattern Model Left Side (Sticker) - Set 8184 (Counterpart)
* Add 1 Part 6091pb018R Red Brick, Modified 1 x 2 x 1 1/3 with Curved Top with Number 17 Pattern Model Right Side (Sticker) - Set 8184 (Counterpart)
|
|
| Author: | Hygrotus | | Posted: | Jan 5, 2020 10:11 | | Subject: | Inventory Change Request for Set 76059-1 | | Viewed: | 14 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 3010pb277 White Brick 1 x 4 with Black 'POLICE 77' Pattern (Sticker) - Set 76059 (Counterpart)
|
| Author: | Hygrotus | | Posted: | Jan 5, 2020 10:08 | | Subject: | Inventory Change Request for Set 60139-1 | | Viewed: | 15 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 3245cpb108 White Brick 1 x 2 x 2 with Inside Stud Holder with Blue 'POLICE' on White Background and Gold Police Badge Pattern (Sticker) - Set 60139 (Counterpart)
|
|
| Author: | Hygrotus | | Posted: | Jan 5, 2020 10:04 | | Subject: | Inventory Change Request for Set 60221-1 | | Viewed: | 24 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 92710c05pb01 White Boat Hull Unitary 28 x 8 with Dark Tan Top with Dark Blue 'de luxe' and Stripes Pattern on Both Sides (Stickers) - Set 60221 (Counterpart)
* Add 1 Part 3010pb278 White Brick 1 x 4 with Fish Finder and Radar Screen Pattern (Sticker) - Set 60221 (Counterpart)
* Add 1 Part 93606pb100 White Slope, Curved 4 x 2 with '36' and Dark Blue Stripes Pattern (Sticker) - Set 60221 (Counterpart)
|
|
| Author: | SezaR | | Posted: | Jan 5, 2020 01:12 | | Subject: | Inventory Change Request for Set 6928-1 | | Viewed: | 27 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 4 Part 4073 Trans-Red Plate, Round 1 x 1
* Add 2 Part 4073c01 Trans-Red Plate, Round 1 x 1, 2 on Sprue
|
|
| Author: | mj. | | Posted: | Jan 4, 2020 16:42 | | Subject: | Inventory Change Request for Set 8163-1 | | Viewed: | 28 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 4 Part 58090 Black Tire 30.4 x 14 VR Solid
Comments from Submitter:
Set 8163 should include tires 30.4 x 14, but without the VR designation. The wheel (345837) does not work with the 30.4 x 14 VR tire (345841). The VR tire is slightly larger on the inside. I could not locate the correct tire without the VR designation on the Bricklink site. I took a picture if you want it for verification.
I bought one complete set (372824) and it was correct, but the extra tire I bought included the VR. That's how I discovered the problem.
MJ
|
|
| Author: | FreeStorm | | Posted: | Jan 4, 2020 04:29 | | Subject: | Inventory Change Request for Set 082-1 | | Viewed: | 22 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part x978c01 Yellow Duplo Door Frame 2 x 4 x 3 with Half Door (Counterpart)
|
| Author: | FreeStorm | | Posted: | Jan 4, 2020 04:28 | | Subject: | Inventory Change Request for Set 524-1 | | Viewed: | 24 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part x978c01 Yellow Duplo Door Frame 2 x 4 x 3 with Half Door (Counterpart)
|
|
| Author: | swfoxtrot | | Posted: | Jan 3, 2020 19:33 | | Subject: | Items scheduled to be removed from catalog | | Viewed: | 113 times | | Topic: | Catalog | | Status: | Open | |
|
| Doing some shopping and browsing and I have come across a few items that say
they are scheduled to be deleted from catalog. I’m curious if that mean removed
so I can no longer find/buy that piece and if that’s true then how would you
go about obtaining it? Also why would any piece be removed from the catalog?
Perhaps I’m not understanding the why behind it. Can someone explain to me please
|
|
| Author: | axaday | | Posted: | Jan 3, 2020 16:20 | | Subject: | Inventory Change Request for Set 5175-1 | | Viewed: | 28 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Black {3839 Plate, Modified 1 x 2 with Handles - Undetermined Ends and Attachment Type to 3839b Plate, Modified 1 x 2 with Handles - Flat Ends, Low Attachment}
Comments from Submitter:
Sealed set, pics following
|
|
| Author: | teran01 | | Posted: | Jan 3, 2020 14:31 | | Subject: | Stop auto-switch "top banners" on homepage | | Viewed: | 114 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Adding changing/moving banners makes me nervous and feels like random ads and
topics on tabloid sites that want to desperately generate clicks. Please, this
is not a site for hyperactive children used to fast cut youtube videos who might
think this is a good idea. Keep still images on Bricklink and put everything
that moves to the main Lego.com site, which can't be made worse anyway. Thanks.
|
|
| Author: | metropolis1927 | | Posted: | Jan 3, 2020 12:09 | | Subject: | Show item quantity on catalog item page! | | Viewed: | 78 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Hello
Can you put somewhere quantity (Qty), shown on item search page, on catalog item
page?! See pictures.
That would be very useful!
Thank you.
Cheers,
Marko
|
|
|
| Author: | elias3 | | Posted: | Jan 3, 2020 11:08 | | Subject: | Inventory Change Request for Set 60017-1 | | Viewed: | 20 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Black {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (undetermined type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}
* Change 2 Part Black {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove}
* Change 2 Part Dark Bluish Gray {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (undetermined type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}
Comments from Submitter:
source: part out sets and own collection
|
|
| Author: | elias3 | | Posted: | Jan 3, 2020 11:05 | | Subject: | Inventory Change Request for Set 60016-1 | | Viewed: | 19 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Black {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (undetermined type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}
* Change 2 Part Dark Bluish Gray {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove}
Comments from Submitter:
source: part out sets and own collection
|
|
| Author: | axaday | | Posted: | Jan 3, 2020 09:06 | | Subject: | Inventory Change Request for Set colsh-15 | | Viewed: | 24 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 27256 Trans-Yellow Wave Angular Lightning Bolt (Extra)
Comments from Submitter:
I forgot to add this before.
|
|
| Author: | gvbricks | | Posted: | Jan 3, 2020 07:45 | | Subject: | Inventory Change Request for Set 75934-1 | | Viewed: | 24 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 2436c Reddish Brown Bracket 1 x 2 - 1 x 4 with Two Rounded Corners at the Bottom (Alternate) (match ID 1)
* Change 1 Part Reddish Brown 2436b Bracket 1 x 2 - 1 x 4 with Rounded Corners {match ID 0 to 1}
|
|
| Author: | BricksetforYou | | Posted: | Jan 3, 2020 06:48 | | Subject: | excel lijst met artikelcode en omschrijving | | Viewed: | 32 times | | Topic: | Inventories | | Status: | Open | |
|
| Goedemiddag,
Waar kan ik een excel doc vinden met de artikelcode en de omschrijving van alle
onderdelen van Lego.
Liefst wel in het nederlands.
Indien mogelijk ook graag met foto.
Bedankt alvast.
|
| Author: | gvbricks | | Posted: | Jan 3, 2020 05:57 | | Subject: | Inventory Change Request for Set 60234-1 | | Viewed: | 24 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 2436c White Bracket 1 x 2 - 1 x 4 with Two Rounded Corners at the Bottom (Alternate) (match ID 1)
* Change 2 Part White 2436b Bracket 1 x 2 - 1 x 4 with Rounded Corners {match ID 0 to 1}
|
|
| Author: | sircueball | | Posted: | Jan 2, 2020 23:33 | | Subject: | Description change for 94886c01? | | Viewed: | 60 times | | Topic: | Catalog | | Status: | Open | |
|
| I think the "and Medium Blue Base" should be dropped from the description.
What do you all think?
I honestly missed this when parting out and just sold a black one, which is completely
black as is the one in the picture, don't think one was ever made with a
different color base than the cannon.
Should I post this somewhere else to request this?
* | | 94886c01 Duplo Cannon Shooting with Axle Hole, Red Firing Button and Matching Color Base
Parts: DUPLO |
|
|
| Author: | MatthewRC | | Posted: | Jan 2, 2020 19:16 | | Subject: | Please add inventory for 970cm00 Legs | | Viewed: | 36 times | | Topic: | Inventories | | Status: | Open | |
|
| Hello, I’ve tried to add inventory for he following part: Hips and Medium Legs
https://www.bricklink.com/v2/catalog/catalogitem.page?id=167789#T=S&O={"iconly":0}
However, I had trouble doing so and could not provide images of the individual
medium legs myself. I wanted these separate legs inventoried so they can be added
to Studio 2.0 in the future. Thank you!
|
|
| Author: | infinibrix | | Posted: | Jan 2, 2020 19:06 | | Subject: | Official Lego Part Codes vs Bricklink Codes? | | Viewed: | 187 times | | Topic: | Catalog | | Status: | Open | |
|
| Now that Lego has acquired Bricklink do you think the official Lego part numbers
will be more widely used/accepted on BL or will Lego in fact actively want to
encourage the use of their codes on the site as a primary means of identifying
parts in the BL catalog?
Either way when you search for an official Lego part number BL already recognises
it so is there any reason the official Lego part code is not displayed alongside
the part in question? Perhaps there’s already an option in the settings to display
them that I don’t know about?
Also is there any reason BL have continued using their own reference codes instead
of switching to Legos? If it’s just a case of not wanting to upset members that
have inventoried their physical stock and become accustomed to these BL codes
wouldn’t it be better to have both codes to hand so that buyers and sellers alike
have the option of choosing whichever codes they prefer to work with?
|
|
| Author: | StormChaser | | Posted: | Jan 2, 2020 17:34 | | Subject: | New 2020 Colors | | Viewed: | 433 times | | Topic: | Catalog | | Status: | Open | |
|
| This is not a comprehensive list. As always, it would be most helpful if BrickLink
included an easy way to see these.
New appearances in dark turquoise:
* | | 18923c01 Vehicle, Base 8 x 16 x 2 1/2 with Mudguards Raised, 4 x 14 Recessed Center with 3 Holes, and Dark Bluish Gray Wheels Holders
Parts: Vehicle, Base |
New appearances in black:
New appearances in white:
New appearances in pearl dark gray:
New appearances in dark bluish gray:
New appearances in light bluish gray:
New appearances in tan:
* | | 32828 Bar 1L with 1 x 1 Round Plate with Hollow Stud
Parts: Bar |
New appearances in reddish brown:
* | | 476 Bar 12L with Open Stud, Tow Ball, and Slit (Boat Mast)
Parts: Bar |
New appearances in red:
New appearances in blue:
New appearances in yellow:
New appearances in orange:
* | | 21459 Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Capped Pommel and Holes in Crossguard and Blade
Parts: Minifigure, Weapon |
New appearances in green:
* | | 44665 Cockpit 4 x 10 x 4 with 3 Holes on Bottom and 2 Pin Holes on Sides
Parts: Cockpit |
* | | 15254 Arch 1 x 6 x 2 - Medium Thick Top without Reinforced Underside
Parts: Arch |
New appearances in lime:
New appearances in pearl gold:
New appearances in bright light yellow:
New appearances in bright light orange:
* | | 14137 Hinge Plate 1 x 8 with Angled Side Extensions, Squared Plate Underside
Parts: Hinge |
New appearances in bright light blue:
New appearances in bright green:
New appearances in bright pink:
New appearances in dark pink:
New appearances in dark orange:
New appearances in dark blue:
New appearances in dark red:
New appearances in dark azure:
* | | 11208 Wheel 14mm D. x 9.9mm with Center Groove, Fake Bolts and 6 Double Spokes
Parts: Wheel |
* | | 55982 Wheel 18mm D. x 14mm with Axle Hole, Fake Bolts and Shallow Spokes
Parts: Wheel |
New appearances in dark green:
New appearances in dark tan:
New appearances in dark purple:
New appearances in dark brown:
New appearances in magenta:
* | | 13269 Wedge 6 x 4 Cutout (Train Roof) with 5 Large Bottom Tubes
Parts: Wedge |
New appearances in light aqua:
* | | 95347 Support 2 x 2 x 10 Girder Triangular Vertical - Type 4 - 3 Posts, 3 Sections
Parts: Support |
New appearances in lavender:
New appearances in medium lavender:
New appearances in medium dark flesh:
New appearances in medium azure:
New appearances in coral:
New appearances in trans-neon orange:
[P=35252]
I got tired of sorting colors, so here are the rest:
This is now in trans-neon green:
* | | 41125 Technic Circular Saw Blade with Pin Hole and Six Teeth (Large Shuriken)
Parts: Technic |
This is now in trans-light blue:
This is now in glitter trans-light blue:
This is now in trans-dark pink:
This is now in trans-orange:
This is now in metallic gold:
This is now in sand green:
This is now in violet:
This is now in yellowish green:
This is now in flat silver:
Finally, if you missed these, here are some entirely new parts:
[P=bb1115]
|
|
| Author: | gvbricks | | Posted: | Jan 2, 2020 11:38 | | Subject: | Set 11010 White Baseplate with 48x48 studs | | Viewed: | 112 times | | Topic: | Catalog | | Status: | Open | |
|
| Why does BrickLink show me a picture of a white 48 x 48 baseplate when I click
on the catalog entry for set 11010?
Ok, maybe the picture is there because it is an official product image from TLG.
So they are also using the wrong image in their own online shop.
According to TLG's description of the set, it contains only a 32 x 32 baseplate...
|
|
| Author: | samsam2 | | Posted: | Jan 2, 2020 11:20 | | Subject: | Inventory Change Request for Set 8934-1 | | Viewed: | 33 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 7 Part {(Not Applicable) to Trans-Light Blue} 57555 Bionicle Squid, Rubber
Comments from Submitter:
The intended color does not vary, although there is color variation in the marbling of intensity or trans-clearness, but all sealed sets I have and I can open more if you want to see more proof. More appropriate is a note similar to zamor spheres
|
|
| Author: | hpoort | | Posted: | Jan 2, 2020 03:51 | | Subject: | Policy change - Undetermined versus Unknown a | | Viewed: | 221 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| With the takeover by TLG, it may be time that some fundamental changes to the
site get implemented. Hence the posting of this idea - that has been bothering
me for years.
— requires programming and website extension —
Currently in the Bricklink catalog are parts that signify ‘undetermined variant’,
commonly marked for deletion or already deleted, and corresponding parts that
represent the specific variants of these. The current system requires sellers
to determine the specific variant type – even if they would prefer not to distinguish.
The same system requires buyers to exactly specify which variant they are interested
in buying – even if they don’t actually care which is commonly true. My suggestion
would be to distinguish the two concepts as are the processes: the process of
specifying what is for sale (which may be undetermined) and the process of specifying
what you want to buy (which may be ‘don’t care’). Both processes are already
separate on Bricklink (store inventory and wanted lists), but the concept of
‘undetermined’ is not.
For the catalog policy
• Keep all undetermined variants in the catalog and even add undetermined
variants for those parts that are similar. This information may be extracted
from the relation type ‘part is similar to’.
• Drop the deletion marks for all the undetermined entries and solely use
this marking for wrong or outdated entries.
For sellers
For sellers to don’t want to distinguish between part variants: list these parts
under the undetermined entry only. The BL system should be modified to show these
entries amidst the specific variants for any non specific search as through wanted
lists.
For buyers
For buyers it should be possible to specify an undetermined variety or in
effect a search pattern instead of a single part number. If a buyer does not
care whether a p=4085 is of type a, b, c or d, the buyer should be able to add
p=4085* to his wanted list and the search engine should have no trouble in matching
4085a, 4085b or 4085d with this. Similarly to the 0 color (labeled N/A or Not
Appicable while in this context it actually means Irrelevant).
Buyers should be assisted by the website to specify a specific variant if applicable,
but default to the don’t care form.
For the Bricklink website
• Add a feature to the ‘Add to Wanted List’ and ‘Edit Wanted List’ forms
to allow adding of (a) this specific variant only or (b) include variants. Then
populate the wanted list with the appropriate search pattern instead of the single
part number. This would take the form of either a complete enumeration of all
varieties like ‘4085|4085a|4085b|4085c|4085d’ (plate 1x1 with clip) or the more
general entry of ‘4085*’ or ‘4085@’; I would think the enumeration is more robust,
as it would also allow ‘3794|3794a|3794b|15573’ (jumper 1x2) and would also
allow manual exclusion of one or more variants.
• Adjust the ‘Items for sale’ pages or page fragments that show all matching
parts to include all variants when searching for the don’t care variety.
For the Bricklink database
• Widen the field WantedListItems.ItemNumber to allow for longer patterns.
100 chars would be enough for most enumerations of varieties I can think of.
For the Bricklink search engine
• For matching wanted lists with store items: presume that wanted list entries
may contain a search pattern instead of a single entry. Change the SQL from ‘=’
to ‘LIKE’ wherever necessary or drop the quotes around the field. (But make sure
no malicious code may be entered through this field).
Extra
• A similar feature might be implemented to search for approximate colors
such as ‘any gray’ or ‘any green’, similar to how Studio groups the colors.
Any thoughts of whether this would be helpful for you as a seller or for you
as a buyer?
|
|
| Author: | Lhugo | | Posted: | Jan 1, 2020 12:49 | | Subject: | IPhone app to identify color? | | Viewed: | 109 times | | Topic: | Colors | | Status: | Open | |
|
| Hi,
Does anyone use an iPhone app that can detect the color of a piece? I’d love
to be able to point the camera to a piece on a white surface and the app would
tell me the color, or at least a guess on the color.
Thanks
|
|
| Author: | legofanit | | Posted: | Jan 1, 2020 08:59 | | Subject: | Inventory Change Request for Set 6382-1 | | Viewed: | 45 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 11 Part 3855 Trans-Clear Glass for Window 1 x 4 x 3 (Alternate)
Comments from Submitter:
In Bricklink inventory for set 6382 are listed 11 quantity of 3855a "Glass for Window 1 x 4 x 3 - old style with circle".
But I have 11 quantity of 3855 "Glass for Window 1 x 4 x 3".
My box was bought new many years ago when I was a child. I have no other set with similar items.
|
|
| Author: | joesecc | | Posted: | Jan 1, 2020 08:35 | | Subject: | minifig cty0006 inconsistency error. | | Viewed: | 75 times | | Topic: | Catalog | | Status: | Open | |
|
| Hi,
Whilst checking this minifig prior to packing it for an order. I noticed a discrepancy
with the description.
The minifig description is listed as having black sunglasses.
but the head description in its inventory states it as having Dark Blue sunglasses.
* | | 3626bpx299 Minifigure, Head Glasses with Dark Blue Sunglasses, Closed Mouth, Light Brown Sideburns and Goatee Pattern - Blocked Open Stud
Parts: Minifigure, Head |
How does this get sorted?
Joe
|
|
| Author: | pieceXpiece | | Posted: | Jan 1, 2020 06:38 | | Subject: | Items Being Deleted | | Viewed: | 129 times | | Topic: | Catalog | | Status: | Open | |
|
| Hello,
As I am going through my LEGO parts I am finding a couple of items that have
the banner that says it will be deleted. It is the only listing of that part
that I can find. Am I not able to list these parts that I have?
Thanks for your help!
Nik
|
| Author: | SurplusParts | | Posted: | Dec 31, 2019 22:27 | | Subject: | Is it worth doing any catalogue work? | | Viewed: | 190 times | | Topic: | Catalog | | Status: | Open | |
|
| Is it worth doing any catalogue work at the moment until they have finalised
the new program?
I have meaning to to inventory a couple of minifigures for a while now and i
have time this week.
Thanks
|
|
| Author: | geebeewojo | | Posted: | Dec 31, 2019 13:24 | | Subject: | Inventory Change Request for Set 9748-1 | | Viewed: | 32 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 78c08 White Hose, Ribbed 7mm D. 8L (Extra)
Comments from Submitter:
Just cleaned and checked this set, book shows one of these items, I didn't find an extra one. I am getting ready to put this up for sale, with extra pieces included, and just want to verify if this is an extra item, so I can list it with or without this item. Thank you for your time.
|
|
| Author: | Bonacieux | | Posted: | Dec 31, 2019 10:43 | | Subject: | Inventory Change Request for Minifig hor025 | | Viewed: | 30 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 4485 Red Minifigure, Headgear Cap - Long Flat Bill
* Add 1 Part 4485 Blue Minifigure, Headgear Cap - Long Flat Bill
|
|
| Author: | StormChaser | | Posted: | Dec 30, 2019 22:51 | | Subject: | Inventory Change Request for Set 9353-1 | | Viewed: | 53 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Book 9353b02 Set 9353 Activity Card 1 (120249)
* Add 1 Book 9353b03 Set 9353 Activity Card 2 (120249)
* Add 1 Book 9353b04 Set 9353 Activity Card 3 (120249)
* Add 1 Book 9353b05 Set 9353 Activity Card 4 (120249)
Comments from Submitter:
I made these requests. That may seem obvious. I mean, I guess it is obvious. So obvious that there is no point in even mentioning it.
Note to self: delete this comment prior to submitting these requests.
|
|
| Author: | tanczy | | Posted: | Dec 30, 2019 06:56 | | Subject: | Inventory Change Request for Set 6852-1 | | Viewed: | 23 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Light Gray {3942c Cone 2 x 2 x 2 - Open Stud to 3942b Cone 2 x 2 x 2 - Blocked Open Stud} {Regular to Alternate} {match ID 0 to 1}
Comments from Submitter:
I have an original set with box, which includes the light gray 3942b part instead of the 3942c.
Please add it as alternate item.
|
| Author: | SSCollectibles | | Posted: | Dec 30, 2019 06:24 | | Subject: | Brick stock | | Viewed: | 96 times | | Topic: | Inventories | | Status: | Open | |
|
| Hello , I am wondering does anyone know of anything like brickstock or brickstore
that will work om and iPad Pro?
|
| Author: | desmalle | | Posted: | Dec 30, 2019 05:29 | | Subject: | Inventory Change Request for Set 8364-1 | | Viewed: | 28 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 41752 Dark Gray Rubber Band / Belt Holder 2 x 4 x 2 1/3 (Extra)
Comments from Submitter:
Item does not appear in the actual building nor in the inventory list of the booklet. No use for this part anywhere in the build.
|
|
| Author: | FreeStorm | | Posted: | Dec 30, 2019 05:24 | | Subject: | Inventory Change Request for Set 3772-1 | | Viewed: | 27 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Yellow 51262 Duplo, Plate 8 x 8 {Regular to Alternate} {match ID 0 to 3}
* Change 1 Part Bright Light Orange 51262 Duplo, Plate 8 x 8 {match ID 0 to 3}
Comments from Submitter:
Something is wrong with these parts:
We should have Yellow or Bright Light Orange, but not both.
I do not find any evidences from sealed set to know if both parts exists and which one is alternate.
The right Light Orange was added in 2013, but we cannot see message log from this change.
Brickset, 'LEGO Missing parts' and toysperiods show Yellow color in inventory.
But picture of box inventory (from toysperiod) show Bright Light Orange color.
I choose to make Yellow as alternate.
-Fred
|
|
| Author: | Gaston.La.Brick | | Posted: | Dec 30, 2019 05:10 | | Subject: | Don't set "Ready" as default order status. | | Viewed: | 133 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| After a user places an order, it gets the default status "Ready".*
This confuses buyers: they think the order was processed and is ready for shipping.
I would like to suggest setting the default order status always to "Pending".
*(Unless they pay at once using BL, it is set to "Paid" automatically. I can't
set it to that status manually. This is confusing since there is a payment status
as well. So that's double info and I would remove that possible value for
the status.)
|
|
| Author: | StormChaser | | Posted: | Dec 30, 2019 03:07 | | Subject: | Define This Item | | Viewed: | 133 times | | Topic: | Catalog | | Status: | Open | |
|
| Is this thing a rangefinder or a helmet antenna?
Some consider it a rangefinder:
Some consider it a helmet antenna:
I have no interest in Star Wars whatsoever, but I do have an interest in consistent
titling of catalog entries. So which is it?
|
|
| Author: | axaday | | Posted: | Dec 29, 2019 19:52 | | Subject: | Add Approval Step "Released" | | Viewed: | 97 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| I realize as a non-admin I may be speaking out of turn and it will make little
difference to most people. I suggest that we add a step where an item is approved
in the catalog, but may still be awaiting release for sale. I get inspired to
make this suggestion every time I work up a set of CMF, but it would surely be
similar for other people who do catalog work on unreleased items. Sets are usually
"on hold" pending for at least a month before the official release. They could
be weighed and often they could be inventoried when they actually hit the catalog
for sale, but in the current system nothing can be done. Weight of a set can
be entered, but not weight of packing or instructions. I have over 100 items
pending in the catalog and I really wish I could get it organized, but I can't.
Would Lego object to us having information in the catalog for upcoming items?
I think they just want the sale dates respected.
|
|
| Author: | TrevithickLego | | Posted: | Dec 29, 2019 18:46 | | Subject: | Can somebody explain please colors of KAUKAU | | Viewed: | 97 times | | Topic: | Colors | | Status: | Open | |
|
| These Bionicle Kaukau masks exist in different colors, but normally they where
produced only in trans dark blue. Where could you find the other colors at that
time. Surely not in the set 8533 or 8583. Maybe in those polybags with surprise
masks ? Could somebody give me please an exploration.
Regards
Nick
|
| Author: | elias3 | | Posted: | Dec 29, 2019 07:57 | | Subject: | Inventory Change Request for Set 60223-1 | | Viewed: | 41 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 58176 Trans-Orange Bar with Light Cover (Bulb) / Bionicle Barraki Eye (Extra)
Comments from Submitter:
source: several part out sets, always found 1x extra.
|
|
| Author: | d66n | | Posted: | Dec 28, 2019 20:48 | | Subject: | Inventory Change Request for Set 8143-1 | | Viewed: | 29 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 32278 Black Technic, Liftarm 1 x 15 Thick (Extra)
Comments from Submitter:
From a sealed box I found 1 bag torn and this part loose in the box. I did not have this part as a spare in my sealed box. I would not expect Lego to supply a spare technic part of such a size and wonder if those providing inventory previously had acquired in their sealed box an extra due to other cases of bag tearing, ie it was more likely that receiving this part as an extra was rare rather than the norm. Consequently, It is my opinion that this should be removed and would be interested to know if you agreed.
|
|
| Author: | MI_Bricks | | Posted: | Dec 28, 2019 16:34 | | Subject: | Porg Catalog Question | | Viewed: | 103 times | | Topic: | Catalog | | Status: | Open | |
|
| Why isn't the Porg (I believe there are four varieties in the catalog) considered
a Minifig?
I'm sorting through the 2019 Star Wars Advent Calendar and other brink built
items (i.e. sw1040 and sw0983) are considered Minifigs.
Just wondering if anyone had an explanation.
|
| Author: | brickapickDE | | Posted: | Dec 28, 2019 11:24 | | Subject: | Inventory Change Request for Set 7894-1 | | Viewed: | 26 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part BA097pb01 White Stickered Assembly 2 x 12 x 2/3 with 'AIRPORT' Pattern (Sticker) - Set 7894 - 1 Plate 2 x 12, 4 Tiles 1 x 6 (Counterpart)
|
|
| Author: | elias3 | | Posted: | Dec 28, 2019 11:13 | | Subject: | Inventory Change Request for Set 60223-1 | | Viewed: | 33 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 44567a Light Bluish Gray Hinge Plate 1 x 2 Locking with 1 Finger on Side with Bottom Groove (Alternate) (match ID 2)
* Change 2 Part Light Bluish Gray 44567b Hinge Plate 1 x 2 Locking with 1 Finger on Side without Bottom Groove {match ID 0 to 2}
Comments from Submitter:
source: several part out sets, found in 1 set both types.
|
|
| Author: | maesehn | | Posted: | Dec 28, 2019 05:36 | | Subject: | Inventory Change Request for Set 6349-1 | | Viewed: | 24 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Yellow {4345 Container, Box 2 x 2 x 2 to 4345a Container, Box 2 x 2 x 2 - Solid Studs}
Comments from Submitter:
Looking at instructions and box shows that container box has solid studs and no mail pattern.
|
| Author: | Scrp749 | | Posted: | Dec 27, 2019 21:37 | | Subject: | Please Release 21156-1 | | Viewed: | 70 times | | Topic: | Catalog | | Status: | Open | |
|
| Hi,
I have 21156 BigFig Creeper and Ocelot on hand and ready to inventory. Cheers!
- Chris
|
|
| Author: | elias3 | | Posted: | Dec 27, 2019 11:05 | | Subject: | Inventory Change Request for Set 60222-1 | | Viewed: | 34 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 44302a Yellow Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove (Alternate) (match ID 2)
* Change 2 Part Yellow 44302b Hinge Plate 1 x 2 Locking with 2 Fingers on End without Bottom Groove {match ID 0 to 1}
Comments from Submitter:
source: serveral part out sets and own collection, all came with the 'with' type.
|
|
| Author: | Hygrotus | | Posted: | Dec 27, 2019 08:18 | | Subject: | Please approve | | Viewed: | 371 times | | Topic: | Catalog | | Status: | Open | |
|
| Yesterday were offcialy released some new 2020 sets. They are available to buy
from offcial LEGO web shop in Europe.
https://brickset.com/article/47982/[uk-eu]-sale-now-on-at-lego-com
So following sets should be approved yesterday:
City
Disney Princess
Friends
Hidden Side
Star Wars
[S=72771-1]
Technic
polybags
Free with qualifying purchases at LEGO.shop.com, 26/12/2019 - 12/01/2020.
btw this should be also approved already
books
[B=9781338581898]
P.S.
I would like to submit new inventories for SW sets 
|
|
| Author: | Sjepetok | | Posted: | Dec 27, 2019 05:46 | | Subject: | Inventory Change Request for Set 8144-1 | | Viewed: | 34 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 4162pb043 Light Bluish Gray Tile 1 x 8 with German Flag and 'M. Schumacher' Pattern (Sticker) (Counterpart)
Comments from Submitter:
All three tiles LBG 1x8 in this set have stickers on them.
|
|
| Author: | StormChaser | | Posted: | Dec 27, 2019 04:31 | | Subject: | Inventory Change Request for Set 1670-1 | | Viewed: | 33 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 4133 Yellow Window 2 x 4 x 3 Pane
* Delete 1 Part 4131 Yellow Door 1 x 4 x 5
* Delete 1 Part 4132 Red Window 2 x 4 x 3 Frame
* Delete 1 Part 4130 Red Door Frame 2 x 4 x 5
* Change 1 Part Red 4130c03 Door Frame 2 x 4 x 5 with Yellow Door 1 x 4 x 5 (4130 / 4131) {Counterpart to Regular}
* Change 1 Part Red 4132c02 Window 2 x 4 x 3 Frame with Yellow Window 2 x 4 x 3 Pane (4132 / 4133) {Counterpart to Regular}
Comments from Submitter:
Per BrickLink image of set box front and side of box showing inventory. Will attach that image to request for preservation.
|
|
| Author: | SezaR | | Posted: | Dec 26, 2019 20:14 | | Subject: | Inventory Change Request for Set 1243-1 | | Viewed: | 32 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 2 Part 3149c01 Light Gray Hinge Plate 2 x 4 (match ID 1)
* Delete 1 Part 3324c01 Light Gray Hinge Plate 2 x 8 (match ID 2)
* Delete 2 Part 3184 Light Gray Plate, Modified 1 x 4 with Towball (match ID 3)
* Delete 2 Part 3183a Light Gray Plate, Modified 1 x 4 with Towball Socket, Long, 2 Slots (8mm Socket Length) (match ID 4)
* Change 2 Part Red 3149c01 Hinge Plate 2 x 4 {Alternate to Regular} {match ID 1 to 0}
* Change 1 Part Red 3324c01 Hinge Plate 2 x 8 {Alternate to Regular} {match ID 2 to 0}
* Change 2 Part Red 3184 Plate, Modified 1 x 4 with Towball {Alternate to Regular} {match ID 3 to 0}
* Change 2 Part Red 3183a Plate, Modified 1 x 4 with Towball Socket, Long, 2 Slots (8mm Socket Length) {Alternate to Regular} {match ID 4 to 0}
|
|
| Author: | axaday | | Posted: | Dec 26, 2019 20:04 | | Subject: | Inventory Change Request for Set 7530-1 | | Viewed: | 25 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Trans-Very Lt Blue {clikits021u Clikits Part Separator with Undetermined Handle to clikits021b Clikits Part Separator with Heart, Flower and Star on Handle}
Comments from Submitter:
Sealed set, pic in reply
|
| Author: | sf_bricks | | Posted: | Dec 26, 2019 18:19 | | Subject: | 4085a light gray 2 types? | | Viewed: | 187 times | | Topic: | Colors | | Status: | Open | |
|
| Hi,
i have many grey 4085a parts. Normally the only gray what is existing is light
gray. But some parts are a litte bit darker??
down is the "normal" light gray. On the top is a light bluish gray of part 4085d.
But what is this in the middle??
|
|
| Author: | redsman | | Posted: | Dec 26, 2019 14:26 | | Subject: | newby listing question. | | Viewed: | 100 times | | Topic: | Inventories | | Status: | Open | |
|
| Looking for some help or advice. What is the box for that is labeled "BULK" on
the listing page? I don't want the buyer to have to buy a certain amount
of a particular item. I just want them to be able to buy the amount they want
so what number do I put in this box ? Any help is appreciated.
Thanks
|
| Author: | WildBricks | | Posted: | Dec 26, 2019 14:04 | | Subject: | missing 7026 on window catalog page | | Viewed: | 46 times | | Topic: | Catalog | | Status: | Open | |
|
| I kept going round and around not being able to identify a part earlier today
when I realized it isn't showing up on the catalog page at all. All the
variations are there, but not the original.
|
|
| Author: | paolocolombo | | Posted: | Dec 26, 2019 12:32 | | Subject: | Part 41747 Sand Green | | Viewed: | 111 times | | Topic: | Catalog | | Status: | Open | |
|
| Good evening everyone!
Is it possible that the central 41747 is Sand Green? Below is Olive Green, on
the left is Lime and on the right is Green.
On bricklink it has an absurd value ....
Paolo
|
|
| Author: | SezaR | | Posted: | Dec 26, 2019 07:36 | | Subject: | Inventory Change Request for Set 6824-1 | | Viewed: | 27 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 4 Part 4073 Trans-Red Plate, Round 1 x 1
* Add 2 Part 4073c01 Trans-Red Plate, Round 1 x 1, 2 on Sprue
* Delete 2 Part 4073 Trans-Yellow Plate, Round 1 x 1
* Add 1 Part 4073c01 Trans-Yellow Plate, Round 1 x 1, 2 on Sprue
|
|
| Author: | SezaR | | Posted: | Dec 26, 2019 02:41 | | Subject: | Inventory Change Request for Set 9452-1 | | Viewed: | 24 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 3 Part 3183a Red Plate, Modified 1 x 4 with Towball Socket, Long, 2 Slots (8mm Socket Length)
* Add 3 Part 3183c Red Plate, Modified 1 x 4 with Towball Socket, Short, 4 Slots (7mm Socket Length)
Comments from Submitter:
Photos will be uploaded soon.
|
|
| Author: | Heartbricker | | Posted: | Dec 25, 2019 23:13 | | Subject: | Do not erase comments on checkout mode change | | Viewed: | 84 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| While checking out in one of the stores here, i needed to leave a comment for
the seller, the order was on 'onsite' payment mode.
After i wrote the message, i changed to 'request an invoice' mode and
was annoyed that my message was erased and i needed to rewrite.
So i'm suggesting that when we change modes of shipping/invoice/etc. - of
there was a message written prior to changing that mode: i'm hoping that
message can remain intact and not be erased.
It's a small thing, obviously not a priority, but would be a time saver if
implemented.
Seasons greetings.
|
|
| Author: | Tholwin | | Posted: | Dec 25, 2019 20:31 | | Subject: | BRICKS & PIECES availability and price | | Viewed: | 212 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Hello,
While I favor buying other people's unwanted pieces, I always check the price
of each piece on "BRICKS & PIECES" (Lego website), in an attempt to avoid buying
on bricklink pieces I could get cheaper and brand new from Lego.
This is the reason why I would love to see in bricklink if pieces are available
on "BRICKS & PIECES", and at which price, without having to search.
Best regards
|
|
| Author: | SezaR | | Posted: | Dec 25, 2019 20:22 | | Subject: | Inventory Change Request for Set 547-1 | | Viewed: | 25 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 3183c Red Plate, Modified 1 x 4 with Towball Socket, Short, 4 Slots (7mm Socket Length)
* Add 1 Part 3183a Red Plate, Modified 1 x 4 with Towball Socket, Long, 2 Slots (8mm Socket Length)
|
|
| Author: | SezaR | | Posted: | Dec 25, 2019 20:08 | | Subject: | Inventory Change Request for Set 540-1 | | Viewed: | 24 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 3183c Red Plate, Modified 1 x 4 with Towball Socket, Short, 4 Slots (7mm Socket Length)
* Add 1 Part 3183b Red Plate, Modified 1 x 4 with Towball Socket, Long, 4 Slots (8mm Socket Length)
|
|
| Author: | SezaR | | Posted: | Dec 25, 2019 19:59 | | Subject: | Inventory Change Request for Set 6351-1 | | Viewed: | 28 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 3183b White Plate, Modified 1 x 4 with Towball Socket, Long, 4 Slots (8mm Socket Length)
* Add 1 Part 3183c White Plate, Modified 1 x 4 with Towball Socket, Short, 4 Slots (7mm Socket Length)
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
Australia, South Australia
USA, North Carolina
Israel, Mehoz Hefa
Poland, w. Opolskie
Germany, Niedersachsen
Belgium
Sweden, Uppsala
Italy, Veneto
Ireland, Dublin
)
)
Denmark
Canada, British Columbia
Portugal
United Kingdom, England
Netherlands, Friesland
Switzerland, Vaud
Croatia, Zagreb City
)
)
Hungary, Budapest
France, Bretagne
