Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | elias3  | | Posted: | Sep 7, 2019 11:40 | | Subject: | Re: Inventory Change Request for Set 7942-1 | | Viewed: | 28 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Petar_416 writes:
| | In Inventories Requests, paulvdb writes:
| | In Inventories Requests, Petar_416 writes:
| | Please make changes to the following inventory:
* Delete 1 Part 3730 Light Bluish Gray Plate, Modified 2 x 2 with Towball Socket, Short, 4 Slots (match ID 1)
* Add 1 Part 63082 Light Bluish Gray Plate, Modified 2 x 2 with Towball Socket, Short, Flattened with Holes and Axle Hole in Center
|
This part is already included in the alternate items section of the inventory.
|
I think it would be correct if 63082 part is in the list and then 3730 is in
the alternative list. Take a look at instructions for 7942 set and you will see
that 62082 part is there listed.
|
Hi
As you know there are 2 versions.
It would be fine if the first release parts are in the inventory, other parts
in the alternate section.
https://www.lego.com/biassets/bi/4502939.pdf
https://www.lego.com/biassets/bi/4586971.pdf
There are a lot of differences between the 1ste and 2nd release. Maybe put all
parts used for the 2nd but not for the 1st in the MID '99'. (as there
are already parts in for the MID 99 in this set)
Stefaan
|
 |
| Author: | elias3 | | Posted: | Aug 25, 2019 04:43 | | Subject: | Re: Inventory Change Request for Part 4276325 | | Viewed: | 35 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, randyf writes:
| | In Inventories Requests, elias3 writes:
| | Please make changes to the following inventory:
* Change 1 Part Black {x77ac200 String, Cord Thin 200cm to x77cc200 String, Cord Medium Thickness 200cm}
Comments from Submitter:
found in 7905 (source: my data)
|
Maybe your data is wrong? This image was taken directly from the
entry in the catalog. That is why the current image is no longer available for
that part.
But, I definitely don't know if that image was always correct for that part,
either. It will be looked into.
Cheers,
Randy
|
Hi
or... the inventory from set 7905 is wrong?
Not as is for now but
if this part is the correct one in the cardboard sleeve.
But don't think so...
Below picture I took years ago and this is my info:
4276325 - x77cc200 - 1x black - 1x set 7905.jpg
(in my data from own collection and part out sets, it was only found in that
set)
As you can see, it's the same picture here on BL, but someone removed the
black sides 
Stefaan
|
|
|
| Author: | elias3 | | Posted: | Aug 21, 2019 14:06 | | Subject: | Inventory Change Request for Part 4276325 | | Viewed: | 26 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Black {x77ac200 String, Cord Thin 200cm to x77cc200 String, Cord Medium Thickness 200cm}
Comments from Submitter:
found in 7905 (source: my data)
|
|
| Author: | elias3 | | Posted: | Aug 11, 2019 03:37 | | Subject: | Re: Inventory Change Request for Set 60003-1 | | Viewed: | 18 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, joeker1 writes:
| | Please make changes to the following inventory:
* Add 1 Part 85861 Yellow Plate, Round 1 x 1 with Open Stud
|
Hi
No... already in see inventory note below.
There are at least 2 different versions of instructions for this set. The differences
for the second version are indicated in this inventory in the Alternate Items
section with Match ID 99.
Quick overview of redesign: The yellow 1 x 1 cone at the end of the fire hose
is inverted so the large end is pointing out. A yellow 1 x 1 round plate with
hole is added to the large end of the cone to hold the water plume.
Stefaan
|
|
| Author: | elias3 | | Posted: | Aug 5, 2019 12:43 | | Subject: | Re: Inventory Change Request for Set 6688-1 | | Viewed: | 24 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, starbeanie writes:
| | See Note at bottom of inventory
In at least one sealed copy of this set, two additional white 3004 Brick 1 x
2 were included to build an alternate model shown on the box. These bricks are
currently included in the Regular Items section along with the one white 3004
Brick 1 x 2 necessary for the main model. It is unclear whether every copy of
this set included the additional bricks.
In Inventories Requests, go4bob writes:
| | Please make changes to the following inventory:
* Delete 3 Part 3004 White Brick 1 x 2
Comments from Submitter:
Going back over set and confirming what's in the instructions, there is only 1 of these elements not 3.
|
|
See all posts about this set
https://www.bricklink.com/messageList.asp?overTP=Y&q=6688&qS=Y&qM=Y&msgID=&uName=&ID=&status=&v=c&max=50
|
|
| Author: | elias3 | | Posted: | Jul 31, 2019 02:27 | | Subject: | Re: Inventory Change Request for Set 7750-1 | | Viewed: | 29 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| | In Inventories Requests, paulvdb writes:
| | In Inventories Requests, FreeStorm writes:
| | Please make changes to the following inventory:
* Add 1 Part 4181pb064 Black Door 1 x 4 x 5 Train Left with Finnish 'VR 7750' Pattern (Sticker) - Set 7750 (Counterpart)
* Add 1 Part 4182pb064 Black Door 1 x 4 x 5 Train Right with Finnish 'VR 7750' Pattern (Sticker) - Set 7750 (Counterpart)
Comments from Submitter:
From my own used set
|
Instructions and set images show the stickers applied on a parts assembly next
to the door. I don't see stickers on the doors in this set. So this counterpart
cannot be accepted unless there is a different version of the instructions where
the stickers are on the doors.
|
There are three alternate models for this set. The second one on the instructions.
The third and forth ones on the box art (two on the front side of the box. On
the back of the box, the alternate model is exactly the same as one of the models
on the front side of the box) See attached
For the third and forth models, the stickers "DB 7750" are applied on the doors.
There are other stickers for various European railways on the sticker sheets,
such as the French one SNCF (however this set was never sold in the market of
France, Italy or UK) Make the number exact, there are 12 stickers advertising
different railways.
It is worth mentioning that many owners of this set prefer to apply the stickers
on the doors which make these part assembly more demanding. Make
In theory, part assemblies should be added for all other stickers, as many are
already added for trains
and
|
You're right Reza, I did look on the instructions and large images on Peeron
and Brickset for alternate images from the box but didn't give attention
to the BL-box image(s).
Stefaan
|
|
| Author: | elias3 | | Posted: | Jul 30, 2019 06:03 | | Subject: | Re: Inventory Change Request for Set 7942-1 | | Viewed: | 20 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, paulvdb writes:
| | In Inventories Requests, paulvdb writes:
| | In Inventories Requests, elias3 writes:
| | In Inventories Requests, paulvdb writes:
| | In Inventories Requests, elias3 writes:
| | In Inventories Requests, elias3 writes:
| | In Inventories Requests, OliS writes:
| | Please make changes to the following inventory:
* Delete 1 Part x77cc30 Black String, Cord Medium Thickness 30cm / 38L (match ID 2)
* Delete 1 Part 60849 Yellow Minifigure, Utensil Hose Nozzle Elaborate (match ID 2)
* Delete 1 Part 60849 Yellow Minifigure, Utensil Hose Nozzle Elaborate (Extra)
* Delete 1 Part 194cx2 Yellow Minifigure, Utensil Hose Nozzle Simple with 35L Black String (Alternate) (match ID 2)
* Add 1 Part 194cx2 Yellow Minifigure, Utensil Hose Nozzle Simple with 35L Black String
Comments from Submitter:
According the partslist in the instruction, the nozzle is provided including string.
|
Hi
No, the first release (from 2007) came with a separate string and hose nozzle.
Instructions 4502939 or 4502940:
see page 15: https://www.lego.com/biassets/bi/4502939.pdf
The updated release (from 2010), hose nozzle with string:
Instructions 4586971 or 4586972
see page 15: https://www.lego.com/biassets/bi/4586971.pdf
The front page from the 1ste and later version didn't change
Stefaan
|
to the IA: can we have a note like this one? (something with the MID 99)
https://www.bricklink.com/v2/catalog/catalogitem.page?S=60002-1#T=I
|
Done. I also switched the regular and alternate so that the older version is
now regular and the new version is alternate.
By the way, you mixed up the links to the instructions. The first link leads
to the second version of instructions and the second link leads to the first
version.
|
Thanks Paul
Mixend up? Did I? Please check again, the 1st link is from the no longer available
instructions from 2007. The 2nd link from the 2010 version. Links taken from
Brickset.
Stefaan
|
Sorry, my mistake. I had assumed that the instructions with the old type hose
nozzle with fixed string would be the older version. But looking at the copyright
dates in the instructions I see that they are indeed the second version. Strange
that they would use the older version of the part in a later version of the set.
|
Based on that I also reversed my earlier decision to switch the regular and alternate
items.
|
Thanks
|
|
| Author: | elias3 | | Posted: | Jul 30, 2019 04:09 | | Subject: | Re: Inventory Change Request for Set 7942-1 | | Viewed: | 20 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, paulvdb writes:
| | In Inventories Requests, elias3 writes:
| | In Inventories Requests, elias3 writes:
| | In Inventories Requests, OliS writes:
| | Please make changes to the following inventory:
* Delete 1 Part x77cc30 Black String, Cord Medium Thickness 30cm / 38L (match ID 2)
* Delete 1 Part 60849 Yellow Minifigure, Utensil Hose Nozzle Elaborate (match ID 2)
* Delete 1 Part 60849 Yellow Minifigure, Utensil Hose Nozzle Elaborate (Extra)
* Delete 1 Part 194cx2 Yellow Minifigure, Utensil Hose Nozzle Simple with 35L Black String (Alternate) (match ID 2)
* Add 1 Part 194cx2 Yellow Minifigure, Utensil Hose Nozzle Simple with 35L Black String
Comments from Submitter:
According the partslist in the instruction, the nozzle is provided including string.
|
Hi
No, the first release (from 2007) came with a separate string and hose nozzle.
Instructions 4502939 or 4502940:
see page 15: https://www.lego.com/biassets/bi/4502939.pdf
The updated release (from 2010), hose nozzle with string:
Instructions 4586971 or 4586972
see page 15: https://www.lego.com/biassets/bi/4586971.pdf
The front page from the 1ste and later version didn't change
Stefaan
|
to the IA: can we have a note like this one? (something with the MID 99)
https://www.bricklink.com/v2/catalog/catalogitem.page?S=60002-1#T=I
|
Done. I also switched the regular and alternate so that the older version is
now regular and the new version is alternate.
By the way, you mixed up the links to the instructions. The first link leads
to the second version of instructions and the second link leads to the first
version.
|
Thanks Paul
Mixend up? Did I? Please check again, the 1st link is from the no longer available
instructions from 2007. The 2nd link from the 2010 version. Links taken from
Brickset.
Stefaan
|
|
| Author: | elias3 | | Posted: | Jul 30, 2019 02:29 | | Subject: | Re: Inventory Change Request for Set 7942-1 | | Viewed: | 16 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, elias3 writes:
| | In Inventories Requests, OliS writes:
| | Please make changes to the following inventory:
* Delete 1 Part x77cc30 Black String, Cord Medium Thickness 30cm / 38L (match ID 2)
* Delete 1 Part 60849 Yellow Minifigure, Utensil Hose Nozzle Elaborate (match ID 2)
* Delete 1 Part 60849 Yellow Minifigure, Utensil Hose Nozzle Elaborate (Extra)
* Delete 1 Part 194cx2 Yellow Minifigure, Utensil Hose Nozzle Simple with 35L Black String (Alternate) (match ID 2)
* Add 1 Part 194cx2 Yellow Minifigure, Utensil Hose Nozzle Simple with 35L Black String
Comments from Submitter:
According the partslist in the instruction, the nozzle is provided including string.
|
Hi
No, the first release (from 2007) came with a separate string and hose nozzle.
Instructions 4502939 or 4502940:
see page 15: https://www.lego.com/biassets/bi/4502939.pdf
The updated release (from 2010), hose nozzle with string:
Instructions 4586971 or 4586972
see page 15: https://www.lego.com/biassets/bi/4586971.pdf
The front page from the 1ste and later version didn't change
Stefaan
|
to the IA: can we have a note like this one? (something with the MID 99)
https://www.bricklink.com/v2/catalog/catalogitem.page?S=60002-1#T=I
|
|
| Author: | elias3 | | Posted: | Jul 30, 2019 02:27 | | Subject: | Re: Inventory Change Request for Set 7942-1 | | Viewed: | 22 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, OliS writes:
| | Please make changes to the following inventory:
* Delete 1 Part x77cc30 Black String, Cord Medium Thickness 30cm / 38L (match ID 2)
* Delete 1 Part 60849 Yellow Minifigure, Utensil Hose Nozzle Elaborate (match ID 2)
* Delete 1 Part 60849 Yellow Minifigure, Utensil Hose Nozzle Elaborate (Extra)
* Delete 1 Part 194cx2 Yellow Minifigure, Utensil Hose Nozzle Simple with 35L Black String (Alternate) (match ID 2)
* Add 1 Part 194cx2 Yellow Minifigure, Utensil Hose Nozzle Simple with 35L Black String
Comments from Submitter:
According the partslist in the instruction, the nozzle is provided including string.
|
Hi
No, the first release (from 2007) came with a separate string and hose nozzle.
Instructions 4502939 or 4502940:
see page 15: https://www.lego.com/biassets/bi/4502939.pdf
The updated release (from 2010), hose nozzle with string:
Instructions 4586971 or 4586972
see page 15: https://www.lego.com/biassets/bi/4586971.pdf
The front page from the 1ste and later version didn't change
Stefaan
|
|
| Author: | elias3 | | Posted: | Jul 29, 2019 06:59 | | Subject: | Re: Inventory Change Request for Set 162-1 | | Viewed: | 23 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, randyf writes:
| | In Inventories Requests, anathema writes:
| | In Inventories Requests, randyf writes:
| | In Inventories Requests, anathema writes:
| | Please make changes to the following inventory:
* Change {1 to 2} Part Yellow 3009p01 Brick 1 x 6 with Black Car Grille Pattern
Comments from Submitter:
Two of these are required to build two of the models shown as photos on the instruction-sheet: see pages 13 and 14 on Peeron's scan of the sheet.
|
How do you know that the brick in those photos that are unseen have the pattern
on them? The logical side of me says that the symmetric side of the train car
would have the same brick, but the skeptical admin side of me says that I need
better proof. Do you have any other reliable source or information that could
help with this request?
Thanks,
Randy
|
I've owned two copies of this set; both came with two of these bricks.
|
And when you say "owned", were the copies originally purchased new by you or
were they used sets?
Thanks,
Randy
|
Hi Randy
Peeron says 2x 3009p01 and 6x 3009 yellow 1x6 bricks, BL = 1x and 7x.
http://www.peeron.com/inv/sets/162-1
Not visible on both sides, only 1x on the extra models:
http://www.peeron.com/scans/162-1/13 (left model maybe 2x, right model 1x of
2x?)
http://www.peeron.com/scans/162-1/14 (bottom model 2x?)
I count 7x yellow 3009 on this model http://www.peeron.com/scans/162-1/9 - Maybe
turned over?
I sold this set a few years ago, unfortunately can't find any data.
Stefaan
|
|
| Author: | elias3 | | Posted: | Jul 24, 2019 08:28 | | Subject: | Re: Inventory Change Request for Set 1060-1 | | Viewed: | 26 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, paulvdb writes:
| | In Inventories Requests, elias3 writes:
| | In Inventories Requests, paulvdb writes:
| | In Inventories Requests, randyf writes:
| | In Inventories Requests, zorbanyc writes:
The other Inventory Admin, Paul, ordered this set new from somewhere. I was waiting
for him to receive his set to take care of this request. Prior to that, though,
when him and I talked about this set, we both had our doubts that the parts were
included in the new set since the box images do not show them anywhere.
Cheers,
Randy
|
I just received my set and can confirm that it has the light gray 4x4 plates.
I will accept the inventory change request now.
|
Hi Paul
Can you take a picture from the 4x4 plates, the bottom side?
Thanks!
Stefaan
|
|
Many thanks Paul!
Stefaan
|
|
| Author: | elias3 | | Posted: | Jul 23, 2019 11:17 | | Subject: | Re: Inventory Change Request for Set 1060-1 | | Viewed: | 25 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, paulvdb writes:
| | In Inventories Requests, randyf writes:
| | In Inventories Requests, zorbanyc writes:
The other Inventory Admin, Paul, ordered this set new from somewhere. I was waiting
for him to receive his set to take care of this request. Prior to that, though,
when him and I talked about this set, we both had our doubts that the parts were
included in the new set since the box images do not show them anywhere.
Cheers,
Randy
|
I just received my set and can confirm that it has the light gray 4x4 plates.
I will accept the inventory change request now.
|
Hi Paul
Can you take a picture from the 4x4 plates, the bottom side?
Thanks!
Stefaan
|
|
| Author: | elias3 | | Posted: | Jul 20, 2019 07:44 | | Subject: | Re: Inventory Change Request for Set 1060-1 | | Viewed: | 33 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, randyf writes:
| | In Inventories Requests, zorbanyc writes:
The other Inventory Admin, Paul, ordered this set new from somewhere. I was waiting
for him to receive his set to take care of this request. Prior to that, though,
when him and I talked about this set, we both had our doubts that the parts were
included in the new set since the box images do not show them anywhere.
Cheers,
Randy
|
Hi Randy
can you share me the pictures (by email?)
Stefaan
|
|
| Author: | elias3 | | Posted: | Jul 8, 2019 08:16 | | Subject: | Re: Inventory Change Request for Set 1060-1 | | Viewed: | 38 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, paulvdb writes:
| | In Inventories Requests, zorbanyc writes:
| | Please make changes to the following inventory:
* Add 6 Part 3031 Light Gray Plate 4 x 4
|
I see that you have a new set for sale in your store. I assume that set is the
source for this request?
|
Maybe some pictures with detail from the 4x4 plates (time area...)?
|
|
| Author: | elias3 | | Posted: | Jul 2, 2019 08:33 | | Subject: | Inventory Change Request for Set 60060-1 | | Viewed: | 31 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 14520 Red Brick, Modified 2 x 4 - 1 x 4 with 2 Recessed Studs and Thin Side Arches (Alternate) (match ID 2)
* Change 4 Part Dark Bluish Gray {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (undetermined type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}
* Change 2 Part Red 52038 Brick, Modified 2 x 4 - 1 x 4 with 2 Recessed Studs and Thick Side Arches {match ID 0 to 2}
Comments from Submitter:
source: part out sets and own collection
|
|
| Author: | elias3 | | Posted: | Jun 18, 2019 03:33 | | Subject: | Re: Inventory Change Request for Set 7864-1 | | Viewed: | 21 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, FreeStorm writes:
| | In Inventories Requests, paulvdb writes:
| | In Inventories Requests, elias3 writes:
| | Please make changes to the following inventory:
* Change 1 Part Light Gray {7864 Electric, Train 12V Transformer for 220V - Type 3 to 7864c01 Electric, Train 12V Transformer for 220V - Type 3 with Output Cover Plug}
Comments from Submitter:
see: https://www.bricklink.com/message.asp?ID=1145375
|
Thanks for adding the new part. But the image for part 7864 still shows the output
cover plug. It should probably be replaced with an image of a transformer without
the output cover plug.
|
I've added the new picture.
Are we doing the same with other parts with a cover? like remote control.
-Fred
|
Thanks Fred
When I did the inv. change req. the old picture pop-up =
http://img.bricklink.com/P/9/7864.gif
I did again a simulatie, see image below
Stefaan
|
|
|
| Author: | elias3 | | Posted: | Jun 17, 2019 21:07 | | Subject: | Inventory Change Request for Set 7864-1 | | Viewed: | 29 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Light Gray {7864 Electric, Train 12V Transformer for 220V - Type 3 to 7864c01 Electric, Train 12V Transformer for 220V - Type 3 with Output Cover Plug}
Comments from Submitter:
see: https://www.bricklink.com/message.asp?ID=1145375
|
|
| Author: | elias3 | | Posted: | Jun 3, 2019 01:37 | | Subject: | Re: Inventory Change Request for Set 4482-1 | | Viewed: | 19 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Jeremy_Beckett writes:
| | Please make changes to the following inventory:
* Add 6 Part 4032 Blue Plate, Round 2 x 2 with Axle Hole
|
Hi
There are at least 2 different versions of instructions for this set. The differences
for the second version are indicated in this inventory in the Alternate Items
section with Match ID 99.
Quick overview of redesign: A dark gray 2 x 2 plate with pin underneath and a
blue 2 x 2 round plate are added to each of the machine's six legs.
You can find this info below the inventory page:
https://www.bricklink.com/catalogItemInv.asp?S=4482-1
Stefaan
|
|
| Author: | elias3 | | Posted: | May 5, 2019 13:19 | | Subject: | Re: Inventory Change Request for Set 8851-1 | | Viewed: | 24 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, randyf writes:
| | In Inventories Requests, paulvdb writes:
| | In Inventories Requests, randyf writes:
| | In Inventories Requests, jack_xp writes:
| | Please make changes to the following inventory:
* Change 1 Part Black {3705b Technic, Axle 4 Threaded to 3705 Technic, Axle 4} (Extra)
Comments from Submitter:
Are you suore that extra item is 3705b (threaded) and not a 3705 (normal)? In the instruction of the kit neve use the 3705b item
|
Nope, not sure at all!
This part was added as an extra in 2010. Unfortunately, the Inventory Change
Requests from back then were not saved indefinitely in the forums like they are
today, so we have no information as to why this change was asked for or approved.
I honestly can't see a reason for it being in there.
Our guidelines for Extras in an inventory state:
Removing or Changing Extra Items - Extra parts can vary depending on when
and where a set was manufactured, meaning that some new sets may include them
and others may not. The quantity of these extra parts can also vary. Extra parts
are typically not removed or reduced in quantity unless it can be determined
that they were originally added or increased in error.
So, to make a decision concerning whether to remove this as an extra part, I
have to somehow determine if it was originally added in error. That is going
to be tough to do after nine years removed from the actual change being made.
Any ideas on how you would proceed with this, Paul?
Cheers,
Randy
|
Part 3705b first appeared as a regular part in sets in 1986 according to our
catalog. So it seems strange that it appeared as an extra part in another set
two years before that. Based on that it seems that a mistake was probably made
when adding this extra.
|
But wouldn't this set have been produced at least for a few years, possibly
overlapping the introduction of part 3705b?
| | The only way to be sure would be to ask the person who added it in the first
place. But even they might not remember it after so many years.
|
I guess we could try that route.
|
Hi
No... that was also my first thought (my cancelled post) but have a look at the
instructions and all 5 are used as regular axle.
Stefaan
|
|
| Author: | elias3 | | Posted: | May 5, 2019 04:21 | | Subject: | Re: Inventory Change Request for Set 8851-1 | | Viewed: | 24 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| | In Inventories Requests, paulvdb writes:
| | In Inventories Requests, randyf writes:
| | In Inventories Requests, jack_xp writes:
| | Please make changes to the following inventory:
* Change 1 Part Black {3705b Technic, Axle 4 Threaded to 3705 Technic, Axle 4} (Extra)
Comments from Submitter:
Are you suore that extra item is 3705b (threaded) and not a 3705 (normal)? In the instruction of the kit neve use the 3705b item
|
Nope, not sure at all!
This part was added as an extra in 2010. Unfortunately, the Inventory Change
Requests from back then were not saved indefinitely in the forums like they are
today, so we have no information as to why this change was asked for or approved.
I honestly can't see a reason for it being in there.
|
|
| | | | Our guidelines for Extras in an inventory state:
Removing or Changing Extra Items - Extra parts can vary depending on when
and where a set was manufactured, meaning that some new sets may include them
and others may not. The quantity of these extra parts can also vary. Extra parts
are typically not removed or reduced in quantity unless it can be determined
that they were originally added or increased in error.
So, to make a decision concerning whether to remove this as an extra part, I
have to somehow determine if it was originally added in error. That is going
to be tough to do after nine years removed from the actual change being made.
Any ideas on how you would proceed with this, Paul?
Cheers,
Randy
|
Part 3705b first appeared as a regular part in sets in 1986 according to our
catalog. So it seems strange that it appeared as an extra part in another set
two years before that. Based on that it seems that a mistake was probably made
when adding this extra.
The only way to be sure would be to ask the person who added it in the first
place. But even they might not remember it after so many years.
|
Moreover, what is the use of
without
?
|
Hi Reza
you need 4x for use with
Stefaan
|
|
| Author: | elias3 | | Posted: | May 3, 2019 07:44 | | Subject: | Re: 3039p23 variations | | Viewed: | 31 times | | Topic: | Catalog | |
|
| In Catalog, 92ebii writes:
| | Hello,
I have in my possession two types of 3039p23 Light Gray Computer Screen with
buttons on the right side.
The regular version (left) has buttons in Yellow, Green and Red - reading downwards.
The other version (right) has the Yellow and Red buttons swapped.
Would this difference be enough for a new code number or at least a mention on
the 3039p23 page.
Regards,
Karl.
|
Hi
From time to time this part comes up.
It's a print error.
Stefaan
|
|
|
| Author: | elias3 | | Posted: | Apr 20, 2019 14:04 | | Subject: | Inventory Change Request for Set 60215-1 | | Viewed: | 17 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 98138 Trans-Red Tile, Round 1 x 1 (Extra)
Comments from Submitter:
source: part out sets
|
|
| Author: | elias3 | | Posted: | Apr 17, 2019 05:43 | | Subject: | Inventory Change Request for Set 60128-1 | | Viewed: | 21 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Black {44567 Hinge Plate 1 x 2 Locking with 1 Finger on Side (undetermined type) to 44567b Hinge Plate 1 x 2 Locking with 1 Finger on Side without Bottom Groove}
Comments from Submitter:
source: part out sets and own collection
|
|
| Author: | elias3 | | Posted: | Apr 16, 2019 10:38 | | Subject: | Inventory Change Request for Set 60054-1 | | Viewed: | 23 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Black {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (undetermined type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}
* Change 1 Part Light Bluish Gray {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove}
* Change 1 Part Light Bluish Gray {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)} (Alternate) {match ID 1 to 2}
Comments from Submitter:
source: part out sets and own collection
|
|
| Author: | elias3 | | Posted: | Apr 16, 2019 05:14 | | Subject: | Inventory Change Request for Set 4434-1 | | Viewed: | 23 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Black {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove}
* Change 2 Part Dark Bluish Gray {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (undetermined type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}
Comments from Submitter:
source: part out sets and own collection
|
|
| Author: | elias3 | | Posted: | Apr 12, 2019 03:12 | | Subject: | Re: Inventory Change Request for Set 4201-1 | | Viewed: | 19 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, paulvdb writes:
Hi
And also... both stickers are already in the catalog as counterpart.
the OP has a sticker on a wrong part
Stefaan
|
|
| Author: | elias3 | | Posted: | Apr 10, 2019 01:41 | | Subject: | Re: We have a new Inventories Administrator! | | Viewed: | 43 times | | Topic: | Inventories | |
|
| In Inventories, Admin_Russell writes:
| | Hello everyone,
I'm very pleased to announce that we have appointed a new Inventories Administrator,
to fill in the place that Marek left when he was promoted to Catalog Associate.
For this position we have selected member Paulvdb (Paul), whom many of you may
know as a catalog contributor, inventories contributor, and Forum participant.
He is also an established seller (since 2011, I believe) so many of you may know
him also through that channel.
Paul has distinguished himself especially by his work with older inventories,
sharing many sealed set contents data with the site for some of our precious
old vintage sets. We have found his contributions to be ultra reliable and think
he is going to do very well in this new role.
Congratulations are in order!
Russell
|
A good choice
Congrats Paul!!
|
|
| Author: | elias3 | | Posted: | Mar 31, 2019 05:22 | | Subject: | Re: Lego 8275 - Contents | | Viewed: | 44 times | | Topic: | Catalog | |
|
| In Catalog, elghDenmark writes:
| | Hello there
This is my first post
I just bought Lego set Lego 8275, the box was open, but all lego bags are unopened.
My question is, does anyone know how many lego bags the package should contain,
so I know with 100 percent that the set is complete.
Have searched for 2 days now and have unfortunately nothing to find  Hope you
can help me and thank you from Denmark
|
Hi
on Brickshelf you can find sometimes a lot of info
here you go:
http://www.brickshelf.com/cgi-bin/gallery.cgi?f=235826
Stefaan
|
|
| Author: | elias3 | | Posted: | Mar 12, 2019 04:57 | | Subject: | Re: Factory assembled 4624 version (glued?) | | Viewed: | 63 times | | Topic: | Catalog | |
|
| In Catalog, mhortar writes:
| | In Catalog, elias3 writes:
| | In Catalog, normann1974 writes:
| | | | Rubber does harden over time as the plasticizers leak out. This hardening can
be accelerated by heat and light as well as changes in the amount of cross-linking
of the polymer chains. How old are these tires?
|
I can't tell. They were found in used bricks I bought. According to BrickLink:
1984-2018 (timeline of 4624 wheel).
/Jan
|
Hi
Yes they are factory pre-assembled wheels.
The first ones that came out were glued or pressed together.
Same for the 3464c02 and 4624c01 and 4624c02.
(from 1984-85 till I think begin 90s)
Also same for the first 6015 type with the 6014a.
The rubber is also harder, the assembles are softer in rubber.
Stefaan
|
Were these only glued in certain regions? This time frame was the heyday of my
LEGO collecting as a child, but I can't ever recall seeing glued wheels (and
I took *everything* apart). I only ever bought sets from the US though.
Do you happen to recall any specific sets that would have had glued wheels? I
have a ton of sealed sets from this era and would like to try and see if any
of them might be glued.
Josh
|
Hi
They came assembled, that's for sure.
As I wrote: 'glued or pressed'
I had a lot 6015+6014a and I took them apart and there was a residue of glue
on them.
(6015+6014a begin 90s)
For the small wheel and tyre, when it's a harder plastic you can't remove
them.
Start begin half 80s when this new type wheel came out.
https://www.bricklink.com/catalogItemIn.asp?P=4624c02&in=S
(some inv. are not correct and the wheel ass. don't pop-up in the list)
Stefaan
|
|
| Author: | elias3 | | Posted: | Mar 11, 2019 07:54 | | Subject: | Re: Factory assembled 4624 version (glued?) | | Viewed: | 72 times | | Topic: | Catalog | |
|
| In Catalog, normann1974 writes:
| | | | Rubber does harden over time as the plasticizers leak out. This hardening can
be accelerated by heat and light as well as changes in the amount of cross-linking
of the polymer chains. How old are these tires?
|
I can't tell. They were found in used bricks I bought. According to BrickLink:
1984-2018 (timeline of 4624 wheel).
/Jan
|
Hi
Yes they are factory pre-assembled wheels.
The first ones that came out were glued or pressed together.
Same for the 3464c02 and 4624c01 and 4624c02.
(from 1984-85 till I think begin 90s)
Also same for the first 6015 type with the 6014a.
The rubber is also harder, the assembles are softer in rubber.
Stefaan
|
|
| Author: | elias3 | | Posted: | Feb 16, 2019 11:34 | | Subject: | Re: Inventory Change Request for Set 6659-1 | | Viewed: | 28 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, paulvdb writes:
| | In Inventories Requests, SezaR writes:
| | Hi,
I have worked with the inventory of this set.
Could you please share what catalog was included in the box? (what is the ID
number of the catalog?)
Thanks
Reza
|
117608-JA
|
Hi
it looks like this one is not yet in the catalog
Stefaan
|
|
| Author: | elias3 | | Posted: | Feb 15, 2019 20:08 | | Subject: | Re: Inventory Change Request for Set 4547-1 | | Viewed: | 19 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, eversmann writes:
| | Please make changes to the following inventory:
* Add 1 Part 2972a Light Gray Train Base 6 x 34 Split-Level with Bottom Tubes and Three Holes at Each End (Alternate)
|
Hi
Was this part in the alternate set?
Stefaan
|
|
| Author: | elias3 | | Posted: | Feb 6, 2019 13:32 | | Subject: | Inventory Change Request for Set 60204-1 | | Viewed: | 29 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 44302a Light Bluish Gray Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove (Alternate) (match ID 1)
* Change 2 Part Light Bluish Gray 44302b Hinge Plate 1 x 2 Locking with 2 Fingers on End without Bottom Groove {match ID 0 to 1}
Comments from Submitter:
2x part out and found the -a type (for the 4x in total)
|
|
| Author: | elias3 | | Posted: | Feb 5, 2019 08:32 | | Subject: | Re: Inventory Change Request for Set 621-1 | | Viewed: | 19 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, elias3 writes:
| | In Inventories Requests, axaday writes:
| | In Inventories Requests, Rigonald writes:
| | Please make changes to the following inventory:
* Add 1 Part 3010pb036u White Brick 1 x 4 with Car Grille Black Pattern (Undetermined Type)
|
They will want you to determine the type.
|
Hi
Was a version with the 1x4 grill brick exist?
http://www.peeron.com/scans/621-1/2
A sticker is used over 3x 1x4 plates.
Same as set 623
Stefaan
|
correction: 2x 1x4 plates etc...
|
|
| Author: | elias3 | | Posted: | Feb 5, 2019 08:14 | | Subject: | Re: Inventory Change Request for Set 621-1 | | Viewed: | 25 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, axaday writes:
| | In Inventories Requests, Rigonald writes:
| | Please make changes to the following inventory:
* Add 1 Part 3010pb036u White Brick 1 x 4 with Car Grille Black Pattern (Undetermined Type)
|
They will want you to determine the type.
|
Hi
Was a version with the 1x4 grill brick exist?
http://www.peeron.com/scans/621-1/2
A sticker is used over 3x 1x4 plates.
Same as set 623
Stefaan
|
|
| Author: | elias3 | | Posted: | Feb 2, 2019 10:27 | | Subject: | Re: Inventory Change Request for Set 8398-1 | | Viewed: | 13 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, shupLiak writes:
| | Please make changes to the following inventory:
* Change 1 Part Reddish Brown {4095 Bar 6.6L with Stop Ring (Patio Umbrella Stand) to 63965 Bar 6L with Stop Ring}
Comments from Submitter:
in instructions there is a number 4538724 and that is not 6.6L bar, but only 6L bar
|
Is already as alternate in the inv. 😉
|
|
| Author: | elias3 | | Posted: | Jan 29, 2019 14:38 | | Subject: | Re: A Smidgen of Lego History | | Viewed: | 35 times | | Topic: | Catalog | |
|
| In Catalog, randyf writes:
| | In Catalog, elias3 writes:
| | In Catalog, Hygrotus writes:
right, Duplo is 5y older as 'moi'
|
Happy Birthday, Stefaan!
Hope you have a great day filled with at least one new LEGO set!
Cheers,
Randy
|
thanks!! No new set at this moment, only Belgian chocolate bon-bons
|
|
| Author: | elias3 | | Posted: | Jan 29, 2019 13:09 | | Subject: | Re: A Smidgen of Lego History | | Viewed: | 29 times | | Topic: | Catalog | |
|
| In Catalog, SylvainLS writes:
| | In Catalog, WoutR writes:
| | […]
| | right, Duplo is 5y older as 'moi'
|
I guess that means: Happy birthday elias3!
|
Indeed, Happy Birthday!
|
thanks!!
| |
| | I see that I had Duplo's first push train
|
Well, the first train that looked like a train and had tracks to roll on.
There were Duplo connecting cars before 1980. Even without tracks, connected
cars very much spell train to a 2-year-old
|
|
|
| Author: | elias3 | | Posted: | Jan 29, 2019 13:08 | | Subject: | Re: A Smidgen of Lego History | | Viewed: | 21 times | | Topic: | Catalog | |
|
| In Catalog, WoutR writes:
| | In Catalog, elias3 writes:
| | In Catalog, Hygrotus writes:
right, Duplo is 5y older as 'moi'
|
I guess that means: Happy birthday elias3!
|
thanks!!
| |
I see that I had Duplo's first push train
|
|
| Author: | elias3 | | Posted: | Jan 29, 2019 11:50 | | Subject: | Re: A Smidgen of Lego History | | Viewed: | 40 times | | Topic: | Catalog | |
|
| In Catalog, Hygrotus writes:
right, Duplo is 5y older as 'moi'
|
|
| Author: | elias3 | | Posted: | Jan 27, 2019 13:37 | | Subject: | Re: Inventory Change Request for Set 40170-1 | | Viewed: | 21 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, chetzler writes:
| | Please make changes to the following inventory:
* Add 1 Part 3068bpb1105 White Tile 2 x 2 with Newspaper 'THE LEGO NEWS' and 'The greatest hero ever!' Pattern (Alternate) (match ID 1)
* Change 1 Part White 3068bpb0431 Tile 2 x 2 with Newspaper 'THE LEGO NEWS', 'volume 3' and 'The greatest LEGO hero ever!' Pattern {match ID 0 to 1}
Comments from Submitter:
Parted out 5 of this set purchased at Mall of America, all five had the alternate tile.
|
Hi
That is correct, my part outs came with the alternate that was found.
Weird that I have not seen this.
Stefaan
|
|
| Author: | elias3 | | Posted: | Jan 14, 2019 04:28 | | Subject: | Re: Inventory Change Request for Set 6440-1 | | Viewed: | 25 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Jetflap writes:
| | In Inventories Requests, Jetflap writes:
| | Please make changes to the following inventory:
* Change {3 to 4} Part Yellow 3062b Brick, Round 1 x 1 Open Stud
Comments from Submitter:
4 are clearly required for the set, 2 are used in the fire extinguishers and 2 for the water cannons. See photo from back of box the shows 2 fire extinguishers and two alternate builds that require 4 of this part.
|
|
Hi
and add also 1x yellow tap
Peeron has also 4x 3062b and 2x 4599a
http://www.peeron.com/inv/sets/6440-1
my count: the MF (driver) use the tap/round brick inside and airtanks inside
the other minfig use the other tap/round brick with the axe (other axe still
on the truck)
Stefaan
|
|
| Author: | elias3 | | Posted: | Jan 13, 2019 07:32 | | Subject: | Re: Inventory Change Request for Set 6394-1 | | Viewed: | 19 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, FreeStorm writes:
Hi
that's right, at that time no other type available.
you can always do a 'change' and not 'add' and 'delete'
Stefaan
|
|
| Author: | elias3 | | Posted: | Jan 13, 2019 07:29 | | Subject: | Re: Inventory Change Request for Set 338-2 | | Viewed: | 21 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, VVV writes:
| | Please make changes to the following inventory:
* Change {12 to 14} Part Yellow 3003old Brick 2 x 2 without Inside Supports
Comments from Submitter:
missing 2 probably from the table, i did get 14 from my build, looking at box and instruction
|
Hi
you're right, http://www.brickshelf.com/cgi-bin/gallery.cgi?f=308228
Stefaan
|
|
| Author: | elias3 | | Posted: | Jan 8, 2019 01:49 | | Subject: | Re: Inventory Change Request for Set 365-2 | | Viewed: | 20 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, axaday writes:
| | Please make changes to the following inventory:
* Change {36 to 38} Part Blue 3003 Brick 2 x 2
* Change {26 to 28} Part Blue 3001 Brick 2 x 4
Comments from Submitter:
Sealed Set contained 2 more each of these pieces. It did not have an old brick separator, but I'll leave that alone.
|
Hi
About the brick separator, that's possible: first runs not, updated runs
with one?
Like this set from the same time:
Do you have the same box layout like the boxpictures in the catalog?
Stefaan
|
|
|
| Author: | elias3 | | Posted: | Jan 7, 2019 10:59 | | Subject: | Inventory Change Request for Set 60082-1 | | Viewed: | 19 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3069bpb687 White Tile 1 x 2 with 'JC60082' License Plate Pattern (Sticker) - Set 60082 (Alternate)
|
|
| Author: | elias3 | | Posted: | Jan 7, 2019 01:38 | | Subject: | Re: Inventory Change Request for Set 75163-1 | | Viewed: | 26 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Hygrotus writes:
| | In Inventories Requests, randyf writes:
| | In Inventories Requests, elias3 writes:
| | In Inventories Requests, randyf writes:
| | In Inventories Requests, xdennisma writes:
| | Please make changes to the following inventory:
* Change {3 to 2} Part Dark Bluish Gray 15392 Minifigure, Weapon Trigger for Gun, Mini Blaster / Shooter
Comments from Submitter:
The main inventory correctly states that there are 2x of the Modified 1 x 2 with Mini Blaster / Shooter, yet indicates that it comes with 3x of the Weapon Trigger for Gun, Mini Blaster / Shooter. While it is true that there are 3x of the triggers, 1x of them is an "extra", which is correctly stated in the Extra Items section of the inventory page. The main inventory should only have 2x of each of the blaster and trigger.
|
The official parts list in the instructions lists 3x of the trigger, and the
official part count for the set is 78 pieces. To have an official part count
of 78 pieces, all three of the triggers must be included in the Regular Items
section.
All of this fits with the definition of what goes in the Regular Items section
of an inventory: https://www.bricklink.com/help.asp?helpID=1562
"Regular Items - Parts required to build the main model and any secondary
models plus any other parts on the official parts list. In the absence
of an official parts list, the official parts count, the instructions, and/or
images on the packaging are used to determine as closely as possible the contents
of this section."
I highlighted the relevant section in italics.
Because the inventory is correct, this request will be rejected.
Cheers,
Randy
|
Hi Randy
Don't forget that the partslist not always is correct...
I did not check this set and inv.
Stefaan
|
It's correct. Our other Inventory Admin is the one who inventoried it.
- Randy
|
I confirm it once again. I had 4 triggers when opened it But only two were
used in built, one is always axtra so I was puzzled that time what to do with
this fourth one That time I added it as second extra and there was a note
about it that in parts list is three of them (now note is deleted). Then Robert
added this new definition and set was adjusted to match parts count on box
So you have whole history of it.
This whole year was strange with Microfigters triggers on parts lists and extra
one included
Check also those:
So it is not an incident. Some experiment with adding more extra triggers? I
don't know but it not happeed in next series in next year of Microfighters
P.S.
I just remember whole winter of the year 2017 was strange with those triggers
in SW
5 shooters, 6 triggers on parts list, plus another one extra in set
6 shooters, 7 triggers on parts list, plus another one extra in set
But in next wave of battlepacks everything back to normal
5 shooters, 5 triggers on parts list, plus another one extra in set.
6 shooters, 6 triggers on parts list, plus another one extra in set.
I have all those sets and they are checked with sealed set content
So this is not a mistake on parts list, such parts list with more triggers are
for four sets in 2017
Marek
|
Thank you!
|
|
| Author: | elias3 | | Posted: | Jan 7, 2019 01:06 | | Subject: | Re: Inventory Change Request for Set 75163-1 | | Viewed: | 25 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, randyf writes:
| | In Inventories Requests, xdennisma writes:
| | Please make changes to the following inventory:
* Change {3 to 2} Part Dark Bluish Gray 15392 Minifigure, Weapon Trigger for Gun, Mini Blaster / Shooter
Comments from Submitter:
The main inventory correctly states that there are 2x of the Modified 1 x 2 with Mini Blaster / Shooter, yet indicates that it comes with 3x of the Weapon Trigger for Gun, Mini Blaster / Shooter. While it is true that there are 3x of the triggers, 1x of them is an "extra", which is correctly stated in the Extra Items section of the inventory page. The main inventory should only have 2x of each of the blaster and trigger.
|
The official parts list in the instructions lists 3x of the trigger, and the
official part count for the set is 78 pieces. To have an official part count
of 78 pieces, all three of the triggers must be included in the Regular Items
section.
All of this fits with the definition of what goes in the Regular Items section
of an inventory: https://www.bricklink.com/help.asp?helpID=1562
"Regular Items - Parts required to build the main model and any secondary
models plus any other parts on the official parts list. In the absence
of an official parts list, the official parts count, the instructions, and/or
images on the packaging are used to determine as closely as possible the contents
of this section."
I highlighted the relevant section in italics.
Because the inventory is correct, this request will be rejected.
Cheers,
Randy
|
Hi Randy
Don't forget that the partslist not always is correct...
I did not check this set and inv.
Stefaan
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
Belgium, Oost-Vlaanderen
