Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | Fragty  | | Posted: | Sep 5, 2019 17:24 | | Subject: | Re: Help with another color | | Viewed: | 26 times | | Topic: | Colors | |
|
| Yes this is "brittle blue" for sure.
It fits the color, its fits the time period
See here for more info about what brittle blue is:
https://www.flickr.com/photos/126975831@N07/15210784018
ps some ppl might collect these
|
 |
| Author: | bb316892 | | Posted: | Sep 5, 2019 16:52 | | Subject: | Re: Help with another color | | Viewed: | 22 times | | Topic: | Colors | |
|
| In Colors, detroitbricks writes:
| | In Colors, mmookk61 writes:
| | In Colors, detroitbricks writes:
| | Ok I have ran across another color issue, I have ran across this a few times
but this time both parts came from the same used set. Assume both are blue but
1 is discolored. Does anybody sell these or do they go in the scrap bin?
|
Put the set number into the list inventory button and see if there are two different
blues listed. What set is it?
|
I realized the lighting in my house in terrible, I tried for many pictures and
think this is it. The set is 3854 The Krusty Krab, and it says there is a 1x3
blue brick and the blue 1x2 jumper. Both are this weird blue and its 100% this
color even inside the brick.
|
Set 3825?
|
|
| Author: | detroitbricks | | Posted: | Sep 5, 2019 16:41 | | Subject: | Re: Help with another color | | Viewed: | 28 times | | Topic: | Colors | |
|
| In Colors, mmookk61 writes:
| | In Colors, detroitbricks writes:
| | Ok I have ran across another color issue, I have ran across this a few times
but this time both parts came from the same used set. Assume both are blue but
1 is discolored. Does anybody sell these or do they go in the scrap bin?
|
Put the set number into the list inventory button and see if there are two different
blues listed. What set is it?
|
I realized the lighting in my house in terrible, I tried for many pictures and
think this is it. The set is 3854 The Krusty Krab, and it says there is a 1x3
blue brick and the blue 1x2 jumper. Both are this weird blue and its 100% this
color even inside the brick.
|
|
|
| Author: | FreeStorm | | Posted: | Sep 5, 2019 15:57 | | Subject: | Inside boxes from set 523-1 | | Viewed: | 72 times | | Topic: | Catalog | | Status: | Open | |
|
| Today I received my bought set
Inside the box
There is two identical boxes with parts inside (look that funny rabbit)
Should I add these boxes as alternate picture of original box 523-1 or add as
a gear inside inventory of set 523-1 ?
-Fred
PS: maybe that box exist in catalog, but I do not find them.
|
|
|
| Author: | WoutR | | Posted: | Sep 5, 2019 15:39 | | Subject: | Re: What year were part numbers introduced? | | Viewed: | 38 times | | Topic: | Catalog | |
|
| In Catalog, cosmicray writes:
| | In Catalog, crazylegoman writes:
| | In Catalog, 1271moggy writes:
| | I have just wondering if anyone knew when Lego started putting the part number
on the pieces. I have just found part 3176 which looks fairly 'new'
but has no part number. It just has the numbers 5 and 04 on the underside.
What do these numbers refer to?
Apologies if this has been asked before - I cannot find a thread.
Thanking you all
|
The one or two digit numbers indicate molds and mold cavities in the actual machine
that creates the parts from liquid plastic injection. As far as what year TLC
started putting part numbers on the parts themselves, I'm afraid I do not
know.
David
|
Part number such as 3001 for a 2x4 brick ? Certainly the older CA parts had that,
so it must have been in the earliest days.
Nita Rae
|
The CA parts did have mold numbers (5 04) but not the part number (3176)
|
|
| Author: | WoutR | | Posted: | Sep 5, 2019 15:29 | | Subject: | Re: What year were part numbers introduced? | | Viewed: | 33 times | | Topic: | Catalog | |
|
| In Catalog, 1271moggy writes:
| | I have just wondering if anyone knew when Lego started putting the part number
on the pieces. I have just found part 3176 which looks fairly 'new'
but has no part number. It just has the numbers 5 and 04 on the underside.
What do these numbers refer to?
Apologies if this has been asked before - I cannot find a thread.
Thanking you all
|
If I remember correctly, around 1985.
|
|
| Author: | cosmicray | | Posted: | Sep 5, 2019 15:27 | | Subject: | Re: What year were part numbers introduced? | | Viewed: | 36 times | | Topic: | Catalog | |
|
| In Catalog, crazylegoman writes:
| | In Catalog, 1271moggy writes:
| | I have just wondering if anyone knew when Lego started putting the part number
on the pieces. I have just found part 3176 which looks fairly 'new'
but has no part number. It just has the numbers 5 and 04 on the underside.
What do these numbers refer to?
Apologies if this has been asked before - I cannot find a thread.
Thanking you all
|
The one or two digit numbers indicate molds and mold cavities in the actual machine
that creates the parts from liquid plastic injection. As far as what year TLC
started putting part numbers on the parts themselves, I'm afraid I do not
know.
David
|
Part number such as 3001 for a 2x4 brick ? Certainly the older CA parts had that,
so it must have been in the earliest days.
Nita Rae
|
|
| Author: | crazylegoman | | Posted: | Sep 5, 2019 11:37 | | Subject: | Re: What year were part numbers introduced? | | Viewed: | 40 times | | Topic: | Catalog | |
|
| In Catalog, 1271moggy writes:
| | I have just wondering if anyone knew when Lego started putting the part number
on the pieces. I have just found part 3176 which looks fairly 'new'
but has no part number. It just has the numbers 5 and 04 on the underside.
What do these numbers refer to?
Apologies if this has been asked before - I cannot find a thread.
Thanking you all
|
The one or two digit numbers indicate molds and mold cavities in the actual machine
that creates the parts from liquid plastic injection. As far as what year TLC
started putting part numbers on the parts themselves, I'm afraid I do not
know.
David
|
|
| Author: | pikachu3 | | Posted: | Sep 5, 2019 10:30 | | Subject: | Re: Help with color | | Viewed: | 24 times | | Topic: | Colors | |
|
| In Colors, randyf writes:
| | In Colors, WoutR writes:
| | I have discussed copper with Admins in the past, I think it is time for an update
|
The only color that I could see a chance of getting added would be something
akin to "Metallic Gold" or "Metallic Silver" to separate surface-coated copper
parts from copper-color molded parts. Beyond that, it would be highly unlikely
to get any consensus to make further changes.
Cheers,
Randy
|
+1 for Metallic Copper 
I don't know of any part that comes in more than one copper color; without
any overlap, it makes sense to keep all the pearl copper colors together here.
|
|
| Author: | WoutR | | Posted: | Sep 5, 2019 10:09 | | Subject: | Re: Help with color | | Viewed: | 33 times | | Topic: | Colors | |
|
| In Colors, randyf writes:
| | In Colors, WoutR writes:
| | I have discussed copper with Admins in the past, I think it is time for an update
|
The only color that I could see a chance of getting added would be something
akin to "Metallic Gold" or "Metallic Silver" to separate surface-coated copper
parts from copper-color molded parts. Beyond that, it would be highly unlikely
to get any consensus to make further changes.
Cheers,
Randy
|
That would be my priority also. I think we need a Metallic Copper.
|
|
| Author: | 1271moggy | | Posted: | Sep 5, 2019 07:51 | | Subject: | What year were part numbers introduced? | | Viewed: | 96 times | | Topic: | Catalog | | Status: | Open | |
|
| I have just wondering if anyone knew when Lego started putting the part number
on the pieces. I have just found part 3176 which looks fairly 'new'
but has no part number. It just has the numbers 5 and 04 on the underside.
What do these numbers refer to?
Apologies if this has been asked before - I cannot find a thread.
Thanking you all
|
|
| Author: | paulvdb | | Posted: | Sep 5, 2019 04:02 | | Subject: | Re: Inventory Change Request for Set 088-1 | | Viewed: | 31 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Delete 1 Part 3404ac02 White Turntable 4 x 4 - Old Type Complete, Faceted with Indented Base
* Add 1 Part 3404ac01 White Turntable 4 x 4 - Old Type Complete, Faceted
|
The person who inventoried the set confirmed that 3404ac01 should be in this
set. See https://www.bricklink.com/message.asp?ID=1155688
|
|
| Author: | SezaR | | Posted: | Sep 5, 2019 00:51 | | Subject: | Re: Inventory Change Request for Set 088-1 | | Viewed: | 19 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Delete 1 Part 3404ac02 White Turntable 4 x 4 - Old Type Complete, Faceted with Indented Base
* Add 1 Part 3404ac01 White Turntable 4 x 4 - Old Type Complete, Faceted
|
https://www.bricklink.com/catalogItemInv.asp?S=088-1&viewID=Y
I have checked many sets. It appears that the turnable 3404c02 was first produced
sometime between 1974-75 and then, it was replaced by 3403c01 in 1976.
|
|
| Author: | SezaR | | Posted: | Sep 5, 2019 00:45 | | Subject: | Inventory Change Request for Set 088-1 | | Viewed: | 26 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 3404ac02 White Turntable 4 x 4 - Old Type Complete, Faceted with Indented Base
* Add 1 Part 3404ac01 White Turntable 4 x 4 - Old Type Complete, Faceted
|
|
| Author: | dcarmine | | Posted: | Sep 4, 2019 21:29 | | Subject: | Re: Help with another color | | Viewed: | 32 times | | Topic: | Colors | |
|
| In Colors, detroitbricks writes:
| | Ok I have ran across another color issue, I have ran across this a few times
but this time both parts came from the same used set. Assume both are blue but
1 is discolored. Does anybody sell these or do they go in the scrap bin?
|
It is discolored from age. I think someone calls it "brittle blue". I have
seen this in my inventory, brand new blue bricks turned yellowish, inside and
out. I donate them to schools. Sometimes these blue parts will crack easily,
especially minifig torsos. It's not all blue parts, so some blue parts are
made with a different recipe?
Someone else talked recently that he opened a MIB set from the '90s had a
lot of blue pieces discolored.
It's a known issue, but I'm not sure if anyone knows why.
HTH
Donna
|
|
| Author: | bb316892 | | Posted: | Sep 4, 2019 20:22 | | Subject: | Re: Help with another color | | Viewed: | 28 times | | Topic: | Colors | |
|
| In Colors, detroitbricks writes:
| | Ok I have ran across another color issue, I have ran across this a few times
but this time both parts came from the same used set. Assume both are blue but
1 is discolored. Does anybody sell these or do they go in the scrap bin?
|
Put the set number into the list inventory button and see if there are two different
blues listed. What set is it?
|
|
| Author: | iprice | | Posted: | Sep 4, 2019 20:11 | | Subject: | Re: Help with another color | | Viewed: | 26 times | | Topic: | Colors | |
|
| In Colors, detroitbricks writes:
| | Ok I have ran across another color issue, I have ran across this a few times
but this time both parts came from the same used set. Assume both are blue but
1 is discolored. Does anybody sell these or do they go in the scrap bin?
|
The hinge brick is definitely blue - it only comes in one shade of blue (if I've
selcted the right product from the catalogue), so that's got to be it. The
1x3 brick just looks like dark blue to me.
TBF the blue hing brick does look darker than normal blue, but that could be
due to bad light, camera etc.
Do you have any normal blue or dark blue bricks to compare these to?
|
|
| Author: | detroitbricks | | Posted: | Sep 4, 2019 19:01 | | Subject: | Help with another color | | Viewed: | 93 times | | Topic: | Colors | | Status: | Open | |
|
| Ok I have ran across another color issue, I have ran across this a few times
but this time both parts came from the same used set. Assume both are blue but
1 is discolored. Does anybody sell these or do they go in the scrap bin?
|
|
|
| Author: | Teup | | Posted: | Sep 4, 2019 18:11 | | Subject: | Re: Add "Part Out Value" Link to Set Entry Page | | Viewed: | 41 times | | Topic: | Suggestions | |
|
| Ah, I didn't read properly  Yes, that should already cause a whole lot
less burden.
Good thing that at least the link to the part out value result page is directly
accessible and editable without having to go through the "get value" button.
That way, at least some of us that have some programming or perhaps Excel or
other skills are able to save a bunch of clicks. Seller tools aren't coming
to it seems we all have to make our own But yes, I think I agree this would
be a good feature.
In Suggestions, speshy writes:
| | In this suggestion I'm suggesting a simple link at each set's page (probably
the better function would be a button). Clicking on it would provide the same
function as navigating through Market Price Guide entering the set's
number, then clicking "Get Value". It doesn't need to be information saved
on the page, but if I'm looking at a set on BL and wondering what its part
out value is, I should be able to find out quicker than taking the above steps.
K
In Suggestions, Teup writes:
| | In Suggestions, speshy writes:
| | I'd like to suggest that each set's "Part Out Value" be linked directly
from its Set Entry page (assuming 6 mo. value of "new" parts). It would remove
a few annoying clicks to obtain a set's part out value after browsing it
in the catalog.
Thanks,
K
|
I'm not an expert but I think this would be too heavy for the website. Even
asking 1 part out value the system needs to process all priceguide data of all
parts in that set. If a totally random user would be browsing through 10 sets,
that whole process has to happen 10 times. It's only useful for sellers and
only at those moments that they want to purchase something, so I think it would
be an overkill of constant processing on the server for a small advantage.
|
|
|
|
| Author: | speshy | | Posted: | Sep 4, 2019 17:11 | | Subject: | Re: Add "Part Out Value" Link to Set Entry Page | | Viewed: | 26 times | | Topic: | Suggestions | |
|
| In this suggestion I'm suggesting a simple link at each set's page (probably
the better function would be a button). Clicking on it would provide the same
function as navigating through Market Price Guide entering the set's
number, then clicking "Get Value". It doesn't need to be information saved
on the page, but if I'm looking at a set on BL and wondering what its part
out value is, I should be able to find out quicker than taking the above steps.
K
In Suggestions, Teup writes:
| | In Suggestions, speshy writes:
| | I'd like to suggest that each set's "Part Out Value" be linked directly
from its Set Entry page (assuming 6 mo. value of "new" parts). It would remove
a few annoying clicks to obtain a set's part out value after browsing it
in the catalog.
Thanks,
K
|
I'm not an expert but I think this would be too heavy for the website. Even
asking 1 part out value the system needs to process all priceguide data of all
parts in that set. If a totally random user would be browsing through 10 sets,
that whole process has to happen 10 times. It's only useful for sellers and
only at those moments that they want to purchase something, so I think it would
be an overkill of constant processing on the server for a small advantage.
|
|
|
| Author: | Teup | | Posted: | Sep 4, 2019 16:52 | | Subject: | Re: Add "Part Out Value" Link to Set Entry Page | | Viewed: | 21 times | | Topic: | Suggestions | |
|
| In Suggestions, speshy writes:
| | I'd like to suggest that each set's "Part Out Value" be linked directly
from its Set Entry page (assuming 6 mo. value of "new" parts). It would remove
a few annoying clicks to obtain a set's part out value after browsing it
in the catalog.
Thanks,
K
|
I'm not an expert but I think this would be too heavy for the website. Even
asking 1 part out value the system needs to process all priceguide data of all
parts in that set. If a totally random user would be browsing through 10 sets,
that whole process has to happen 10 times. It's only useful for sellers and
only at those moments that they want to purchase something, so I think it would
be an overkill of constant processing on the server for a small advantage.
|
|
| Author: | steelant | | Posted: | Sep 4, 2019 15:24 | | Subject: | Inventory Change Request for Set 329-1 | | Viewed: | 31 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 4 Part Black {3009 Brick 1 x 6 to CRSSPRT02 Brick 1 x 6 without Bottom Tubes, with Cross Supports}
* Change 3 Part Black {3023 Plate 1 x 2 to 3023OLD Plate 1 x 2 with old style bottom}
* Change 20 Part Light Gray {3023 Plate 1 x 2 to 3023OLD Plate 1 x 2 with old style bottom}
* Change 2 Part Trans-Clear {3009 Brick 1 x 6 to CRSSPRT02 Brick 1 x 6 without Bottom Tubes, with Cross Supports}
* Change 2 Part Trans-Clear {3023 Plate 1 x 2 to 3023OLD Plate 1 x 2 with old style bottom}
* Change 3 Part Yellow {3023 Plate 1 x 2 to 3023OLD Plate 1 x 2 with old style bottom}
Comments from Submitter:
The information comes from the opening of a "mint-in-box" unopened set (Samsonite). I opened the set to verify the pieces. I also have info on what "lego logo's" are on the studs, to ensure era-specific correctness if interested.
|
|
| Author: | randyf | | Posted: | Sep 4, 2019 12:44 | | Subject: | Re: Help with color | | Viewed: | 41 times | | Topic: | Colors | |
|
| In Colors, WoutR writes:
| | I have discussed copper with Admins in the past, I think it is time for an update
|
The only color that I could see a chance of getting added would be something
akin to "Metallic Gold" or "Metallic Silver" to separate surface-coated copper
parts from copper-color molded parts. Beyond that, it would be highly unlikely
to get any consensus to make further changes.
Cheers,
Randy
|
|
| Author: | WoutR | | Posted: | Sep 4, 2019 09:52 | | Subject: | Re: Help with color | | Viewed: | 28 times | | Topic: | Colors | |
|
| In Colors, DeLuca writes:
| | In Colors, WoutR writes:
| | BrickLink's copper combines several different copper-like colors.
It combines LEGO colors 139 Copper, 189 Reddish Gold, 176 Red Flip/Flop (for Bionicle mask 32573 and 32572), 178 Yellow Flip/Flop (for Bionicle Kanohi mask), 346 Copper Metallic, 300 Copper, Drum Lacquered matte copper surface coating, 334 Copper ink (another surface coating).
|
Wow. 🤯 Why??
Is there an actual reason for this (e.g. parts that overlap between LEGO’s colours,
natural colour-variations that make identification difficult, etc), or is it
just the product of inertia?
|
When parts are released in a color that is not (yet) included in the Bricklink
catalog, there are two options:
- Add the new color,
- Group the color with an existing color
For all copper colors (both plastic colors and surface coatings), the second
option was chosen even though the appearance of the part can be very different.
This is supposed to make it easier for buyers and sellers. Many sellers will
not be able to accurately identify these colors because they are not used often
enough. These 7 colors were used for less than 50 parts in our catalog.
I have discussed copper with Admins in the past, I think it is time for an update
|
|
| Author: | bb53904 | | Posted: | Sep 4, 2019 05:20 | | Subject: | Re: Inventory Change Request for Set 7413-1 | | Viewed: | 22 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, axaday writes:
| | Please make changes to the following inventory:
* Add 2 Part 30389c Light Gray Hinge Brick 2 x 2 Locking with 1 Finger Vertical and Axle Hole - X Opening (Alternate) (match ID 1)
* Change 2 Part Light Gray 30389b Hinge Brick 2 x 2 Locking with 1 Finger Vertical and Axle Hole {match ID 0 to 1}
Comments from Submitter:
I didn't notice until I was taking a pic for the catalog and then realized I'd just been down this road in another set.
|
I just took this set apart over the weekend for the first time since it was built
from MISB.
You made me look, and I have 30389c also.
Thea
An Orient Adventure!
|
|
| Author: | axaday | | Posted: | Sep 3, 2019 22:42 | | Subject: | Inventory Change Request for Set 7413-1 | | Viewed: | 31 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 30389c Light Gray Hinge Brick 2 x 2 Locking with 1 Finger Vertical and Axle Hole - X Opening (Alternate) (match ID 1)
* Change 2 Part Light Gray 30389b Hinge Brick 2 x 2 Locking with 1 Finger Vertical and Axle Hole {match ID 0 to 1}
Comments from Submitter:
I didn't notice until I was taking a pic for the catalog and then realized I'd just been down this road in another set.
|
|
| Author: | DeLuca | | Posted: | Sep 3, 2019 17:44 | | Subject: | Re: Help with color | | Viewed: | 20 times | | Topic: | Colors | |
|
| In Colors, WoutR writes:
| | BrickLink's copper combines several different copper-like colors.
It combines LEGO colors 139 Copper, 189 Reddish Gold, 176 Red Flip/Flop (for Bionicle mask 32573 and 32572), 178 Yellow Flip/Flop (for Bionicle Kanohi mask), 346 Copper Metallic, 300 Copper, Drum Lacquered matte copper surface coating, 334 Copper ink (another surface coating).
|
Wow. 🤯 Why??
Is there an actual reason for this (e.g. parts that overlap between LEGO’s colours,
natural colour-variations that make identification difficult, etc), or is it
just the product of inertia?
|
|
| Author: | samsam2 | | Posted: | Sep 3, 2019 15:29 | | Subject: | Inventory Change Request for Set 70012-2 | | Viewed: | 25 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 61678pb112R Dark Bluish Gray Slope, Curved 4 x 1 No Studs with Dark Red Curved Tube and Hull Plates Pattern Model Right Side (Sticker) - Set 70012 (Counterpart)
|
|
| Author: | paulvdb | | Posted: | Sep 3, 2019 15:24 | | Subject: | Re: Inventory Change Request for Set 5973-1 | | Viewed: | 22 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, bricks_canada writes:
| | Please make changes to the following inventory:
* Add 2 Part 2431pb151 Black Tile 1 x 4 with Gray Circles and Rectangles Pattern (Sticker) - Set 5973 (Counterpart)
Comments from Submitter:
this part with the sticker is of quantity: 2
|
Thanks for bringing this to our attention. But the correct procedure would be
to change the quantity of the existing lot to 2. I have done that for you.
|
|
| Author: | paulvdb | | Posted: | Sep 3, 2019 15:19 | | Subject: | Re: Inventory Change Request for Set 70012-1 | | Viewed: | 17 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, samsam2 writes:
| | Please make changes to the following inventory:
* Add 1 Part 61678pb112R Dark Bluish Gray Slope, Curved 4 x 1 No Studs with Dark Red Curved Tube and Hull Plates Pattern Model Right Side (Sticker) - Set 70012 (Counterpart)
|
This counterpart does not look right for this set. I'm assuming it should
be in set
Please submit the request again for that set.
|
|
| Author: | samsam2 | | Posted: | Sep 3, 2019 15:13 | | Subject: | Inventory Change Request for Set 70012-1 | | Viewed: | 22 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 61678pb112R Dark Bluish Gray Slope, Curved 4 x 1 No Studs with Dark Red Curved Tube and Hull Plates Pattern Model Right Side (Sticker) - Set 70012 (Counterpart)
|
|
| Author: | Teup | | Posted: | Sep 3, 2019 13:28 | | Subject: | Re: download as XML actually saves as a TXT file | | Viewed: | 30 times | | Topic: | Inventories | |
|
| In Inventories, Jallington59 writes:
| | In Inventories, Teup writes:
| | In Inventories, Jallington59 writes:
| | Hi,
Trying to export my inventory into an xML file.
The download option offers XML as a format, but when the file saves, it is a
.txt file.
I cannot use TXT files with other sites so I need to know if there is a way to
truly pull my inventory as XML.
thanks
|
XML is not a file type, it just refers to a way to structure data in plain text.
It only means that item data is placed in between tags with pointy brackets.
A file in XML formatting can have any kind of extension: txt, xls, html, ...
If you need another extension, you can just rename the file. If that doesn't
work, then probably you need something else than an XML formatted file. What
do you need it for?
|
Thank you.
I am trying to copy my inventory over to Brickowl. They ask for XML files.
I get "Lot ID" errors from every format I've used
|
Ah yes. I've written my own converter for this. But you can use Brickstock:
Brickstock can read Bricklink xml formatted files, and save them as bsx. That
bsx file should be fit for upload on BrickOwl.
|
|
| Author: | Jallington59 | | Posted: | Sep 3, 2019 13:25 | | Subject: | Re: download as XML actually saves as a TXT file | | Viewed: | 25 times | | Topic: | Inventories | |
|
| In Inventories, Teup writes:
| | In Inventories, Jallington59 writes:
| | Hi,
Trying to export my inventory into an xML file.
The download option offers XML as a format, but when the file saves, it is a
.txt file.
I cannot use TXT files with other sites so I need to know if there is a way to
truly pull my inventory as XML.
thanks
|
XML is not a file type, it just refers to a way to structure data in plain text.
It only means that item data is placed in between tags with pointy brackets.
A file in XML formatting can have any kind of extension: txt, xls, html, ...
If you need another extension, you can just rename the file. If that doesn't
work, then probably you need something else than an XML formatted file. What
do you need it for?
|
Thank you.
I am trying to copy my inventory over to Brickowl. They ask for XML files.
I get "Lot ID" errors from every format I've used
|
|
| Author: | axaday | | Posted: | Sep 3, 2019 06:26 | | Subject: | Inventory Change Request for Set 3143-1 | | Viewed: | 21 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part Scalabridle Brown Brown Scala Horse Bridle
* Add 1 Part ScalaRein Brown Brown Scala Horse Rein
* Add 1 Part 33178 Light Turquoise Scala Utensil Bucket Round
* Add 1 Part bb972 Light Turquoise Scala Handle for Wicker Basket
* Add 1 Part ScaleTentCloth (Not Applicable) Yellow and Red Scala Tent Cloth with LEGO and Scala Logo Pattern
* Change 1 Part Brown Scalabridlec01 Brown Scala Horse Bridle and Rein {Regular to Counterpart}
* Change 1 Part Light Turquoise 33178c01 Scala Utensil Bucket Round with Same Color Handle {Regular to Counterpart}
* Change 1 Part Yellow scltent Scala Tent with LEGO and Scala Logo Pattern {Regular to Counterpart}
Comments from Submitter:
These items come in the set unassembled.
|
|
| Author: | WoutR | | Posted: | Sep 3, 2019 02:14 | | Subject: | Re: Color Identification | | Viewed: | 36 times | | Topic: | Colors | |
|
| In Colors, randyf writes:
| | In Colors, antiquer88 writes:
| | I need some help identifying the color of the Bionicle mask on the right. It
is part #32573. It came in a large lot of used Bionicle parts, so I don't
know what set it came from originally. Supposedly, it only comes in Black, Blue,
Dark Gray, Light Gray, Lime, Medium Blue, Orange, Tan, Yellow, Copper, and Pearl
Light Gray.
As you can see, this is not any of those colors. I have photographed it with
a copper part next to it, so you can see that it is not copper. The closest
I can figure is that this is chrome pink, but there is nothing chrome about it.
It is more like a pearl dark pink color.
What color do you think it is?
I appreciate your help.
Stan.
|
This mask is actually a LEGO color known as "Red Flip/Flop" and was only used
for the two Bionicle masks shown in
https://www.flickr.com/photos/126975831@N07/15123159082/
The LEGO color "Red Flip/Flop" does not have a specific color on BrickLink and
is lumped under "Copper" since there is no other color close to it.
Cheers,
Randy
|
Correct.
BrickLink's copper combines several different copper-like colors.
It combines LEGO colors 139 Copper, 189 Reddish Gold, 176 Red Flip/Flop (for
Bionicle mask 32573 and 32572), 178 Yellow Flip/Flop (for Bionicle Kanohi mask),
346 Copper Metallic, 300 Copper, Drum Lacquered matte copper surface coating,
334 Copper ink (another surface coating).
|
|
| Author: | WoutR | | Posted: | Sep 3, 2019 02:08 | | Subject: | Re: Help with color | | Viewed: | 40 times | | Topic: | Colors | |
|
| In Colors, detroitbricks writes:
| | I have a part 30602 and I'm trying to figure the correct color. I believe
it to be copper since it's the only known color that makes sense. I have
added a copper color part to show the color difference.
|
It is copper.
BrickLink's copper combines several different copper-like colors.
It combines LEGO colors 139 Copper, 189 Reddish Gold, 176 Red Flip/Flop (for
Bionicle mask 32573 and 32572), 178 Yellow Flip/Flop (for Bionicle Kanohi mask),
346 Copper Metallic, 300 Copper, Drum Lacquered matte copper surface coating,
334 Copper ink (another surface coating).
|
|
| Author: | MusicCityBlocks | | Posted: | Sep 2, 2019 21:23 | | Subject: | Re: Help with color | | Viewed: | 23 times | | Topic: | Colors | |
|
| In Colors, detroitbricks writes:
| | I have a part 30602 and I'm trying to figure the correct color. I believe
it to be copper since it's the only known color that makes sense. I have
added a copper color part to show the color difference.
|
I'm sure that is copper. If you look at the "known colors" for that part
the only one that is even close is copper. I'm sure it's just a different
batch or age.
|
|
| Author: | randyf | | Posted: | Sep 2, 2019 21:22 | | Subject: | Re: Color Identification | | Viewed: | 35 times | | Topic: | Colors | |
|
| In Colors, antiquer88 writes:
| | I need some help identifying the color of the Bionicle mask on the right. It
is part #32573. It came in a large lot of used Bionicle parts, so I don't
know what set it came from originally. Supposedly, it only comes in Black, Blue,
Dark Gray, Light Gray, Lime, Medium Blue, Orange, Tan, Yellow, Copper, and Pearl
Light Gray.
As you can see, this is not any of those colors. I have photographed it with
a copper part next to it, so you can see that it is not copper. The closest
I can figure is that this is chrome pink, but there is nothing chrome about it.
It is more like a pearl dark pink color.
What color do you think it is?
I appreciate your help.
Stan.
|
This mask is actually a LEGO color known as "Red Flip/Flop" and was only used
for the two Bionicle masks shown in
https://www.flickr.com/photos/126975831@N07/15123159082/
The LEGO color "Red Flip/Flop" does not have a specific color on BrickLink and
is lumped under "Copper" since there is no other color close to it.
Cheers,
Randy
|
|
| Author: | DeLuca | | Posted: | Sep 2, 2019 21:21 | | Subject: | Re: Help with color | | Viewed: | 24 times | | Topic: | Colors | |
|
| In Colors, detroitbricks writes:
| | I have a part 30602 and I'm trying to figure the correct color. I believe it to be copper since it's the only known color that makes sense. I have added a copper color part to show the color difference.
|
These parts are Copper. See attached thread for details:
https://www.bricklink.com/messageThread.asp?ID=256884&nID=1155374
|
| Author: | detroitbricks | | Posted: | Sep 2, 2019 20:54 | | Subject: | Help with color | | Viewed: | 94 times | | Topic: | Colors | | Status: | Open | |
|
| I have a part 30602 and I'm trying to figure the correct color. I believe
it to be copper since it's the only known color that makes sense. I have
added a copper color part to show the color difference.
|
|
|
| Author: | DeLuca | | Posted: | Sep 2, 2019 19:39 | | Subject: | Re: Color Identification | | Viewed: | 31 times | | Topic: | Colors | |
|
| In Colors, antiquer88 writes:
| | So, I should list it as copper that has darkened over time?
|
When I said "over time", I meant that LEGO periodically changes their colours
slightly, not that the part has discoloured. (One example of colour-change-over-time
is Pearl Gold, with older elements tending to be lighter and newer ones tending
to be darker - But all variations still considered "Pearl Gold").
This part is Copper, but 2001 Copper is darker than 2019 (or 2006) Copper.
|
|
| Author: | popsicle | | Posted: | Sep 2, 2019 19:29 | | Subject: | Re: Color Identification | | Viewed: | 37 times | | Topic: | Colors | |
|
| In Colors, DeLuca writes:
| | In Colors, antiquer88 writes:
| | I need some help identifying the color of the Bionicle mask on the right. It
is part #32573. It came in a large lot of used Bionicle parts, so I don't
know what set it came from originally. Supposedly, it only comes in Black, Blue,
Dark Gray, Light Gray, Lime, Medium Blue, Orange, Tan, Yellow, Copper, and Pearl
Light Gray.
As you can see, this is not any of those colors. I have photographed it with
a copper part next to it, so you can see that it is not copper. The closest
I can figure is that this is chrome pink, but there is nothing chrome about it.
It is more like a pearl dark pink color.
What color do you think it is?
I appreciate your help.
Stan.
|
The set in which this part appears (bilmasks-1) was released in 2001, while the
Exo-Force robots were first released in 2006. Colours (particularly Pearl-type)
tend to change somewhat over time, and the description for set (bilmasks-1) specifies
that the colour is dark Copper:
|
I think I've expressed this before, but it's worth repeating: Impressive
catalog command!
|
|
| Author: | Brick_a_mind | | Posted: | Sep 2, 2019 18:37 | | Subject: | Re: Color Identification | | Viewed: | 27 times | | Topic: | Colors | |
|
| | Thanks for your help! |
|
| Author: | Teup | | Posted: | Sep 2, 2019 18:27 | | Subject: | Re: download as XML actually saves as a TXT file | | Viewed: | 27 times | | Topic: | Inventories | |
|
| In Inventories, Jallington59 writes:
| | Hi,
Trying to export my inventory into an xML file.
The download option offers XML as a format, but when the file saves, it is a
.txt file.
I cannot use TXT files with other sites so I need to know if there is a way to
truly pull my inventory as XML.
thanks
|
XML is not a file type, it just refers to a way to structure data in plain text.
It only means that item data is placed in between tags with pointy brackets.
A file in XML formatting can have any kind of extension: txt, xls, html, ...
If you need another extension, you can just rename the file. If that doesn't
work, then probably you need something else than an XML formatted file. What
do you need it for?
|
|
| Author: | Brick_a_mind | | Posted: | Sep 2, 2019 18:25 | | Subject: | Re: Color Identification | | Viewed: | 26 times | | Topic: | Colors | |
|
| | So, I should list it as copper that has darkened over time? |
|
| Author: | DeLuca | | Posted: | Sep 2, 2019 18:16 | | Subject: | Re: Color Identification | | Viewed: | 34 times | | Topic: | Colors | |
|
| In Colors, antiquer88 writes:
| | I need some help identifying the color of the Bionicle mask on the right. It
is part #32573. It came in a large lot of used Bionicle parts, so I don't
know what set it came from originally. Supposedly, it only comes in Black, Blue,
Dark Gray, Light Gray, Lime, Medium Blue, Orange, Tan, Yellow, Copper, and Pearl
Light Gray.
As you can see, this is not any of those colors. I have photographed it with
a copper part next to it, so you can see that it is not copper. The closest
I can figure is that this is chrome pink, but there is nothing chrome about it.
It is more like a pearl dark pink color.
What color do you think it is?
I appreciate your help.
Stan.
|
The set in which this part appears (bilmasks-1) was released in 2001, while the
Exo-Force robots were first released in 2006. Colours (particularly Pearl-type)
tend to change somewhat over time, and the description for set (bilmasks-1) specifies
that the colour is dark Copper:
|
|
| Author: | Brick_a_mind | | Posted: | Sep 2, 2019 18:03 | | Subject: | Color Identification | | Viewed: | 111 times | | Topic: | Colors | | Status: | Open | |
|
| I need some help identifying the color of the Bionicle mask on the right. It
is part #32573. It came in a large lot of used Bionicle parts, so I don't
know what set it came from originally. Supposedly, it only comes in Black, Blue,
Dark Gray, Light Gray, Lime, Medium Blue, Orange, Tan, Yellow, Copper, and Pearl
Light Gray.
As you can see, this is not any of those colors. I have photographed it with
a copper part next to it, so you can see that it is not copper. The closest
I can figure is that this is chrome pink, but there is nothing chrome about it.
It is more like a pearl dark pink color.
What color do you think it is?
I appreciate your help.
Stan.
|
|
|
| Author: | Jallington59 | | Posted: | Sep 2, 2019 17:34 | | Subject: | download as XML actually saves as a TXT file | | Viewed: | 41 times | | Topic: | Inventories | | Status: | Open | |
|
| Hi,
Trying to export my inventory into an xML file.
The download option offers XML as a format, but when the file saves, it is a
.txt file.
I cannot use TXT files with other sites so I need to know if there is a way to
truly pull my inventory as XML.
thanks
|
| Author: | axaday | | Posted: | Sep 2, 2019 17:31 | | Subject: | Inventory Change Request for Set 3142-1 | | Viewed: | 24 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part {Blue to Violet} scl062 Scala, Clothes Female Pants with Two Pockets
Comments from Submitter:
Randy suspected, I confirm
|
|
| Author: | samsam2 | | Posted: | Sep 2, 2019 16:59 | | Subject: | Inventory Change Request for Set 70009-1 | | Viewed: | 23 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 61678pb119 White Slope, Curved 4 x 1 No Studs with 4 Large Scratches Pattern 3 (Sticker) - Set 70009 (Counterpart)
* Add 1 Part 61678pb118 White Slope, Curved 4 x 1 No Studs with 4 Large Scratches Pattern 2 (Sticker) - Set 70009 (Counterpart)
|
|
| Author: | bricks_canada | | Posted: | Sep 2, 2019 16:36 | | Subject: | Inventory Change Request for Set 5973-1 | | Viewed: | 22 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 2431pb151 Black Tile 1 x 4 with Gray Circles and Rectangles Pattern (Sticker) - Set 5973 (Counterpart)
Comments from Submitter:
this part with the sticker is of quantity: 2
|
|
| Author: | Turez | | Posted: | Sep 2, 2019 15:29 | | Subject: | Re: Inventory Change Request for Set 6273-1 | | Viewed: | 35 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, neoleg writes:
| | Please make changes to the following inventory:
* Change 1 Part Brown {4738a Container, Treasure Chest Bottom - Slots in Back to 4738b Container, Treasure Chest Bottom - No Slots in Back}
* Change 1 Part Brown {4739a Container, Treasure Chest Lid - Thick Hinge to 4739b Container, Treasure Chest Lid - Thin Hinge}
* Change 1 Part Brown {4738ac01 Container, Treasure Chest Bottom - Slots in Back with Same Color Container, Treasure Chest Lid - Thick Hinge (4738a / 4739a) to 4738bc01 Container, Treasure Chest Bottom - No Slots in Back with Same Color Container, Treasure Chest Lid - Thin Hinge (4738b / 4739b)} (Counterpart)
Comments from Submitter:
My set actually contains the old style (B) treasure chest with no back slots and thin hinge. Confirmed by actual inventory and product photos on box/instructions. (Are there alternate versions?)
|
Hi,
I am very sure that this set came with the "a" variant for two reasons:
1. Set 6273 was produced between 1991 and 1993. Set 6260 was produced between
1989 and 1991 and that set already had the "a" variant (link below).
2. A few years ago, the user 1977_mauro changed the inventory of 6273 and many
other old sets based on sealed set contents (he added extra parts or string lenghts,
for example). As we can see, he has not changed the treasure chest in the inventory
of set 6273 but he has changed it in other inventories. I am sure he would have
also changed it here if he had found the "b" type in his copy.
All in all, the "a" type should stay here but the "b" type can be added as an
alternate if you confirm that you have found it in a sealed set.
Regards,
Jonas
http://www.brickshelf.com/cgi-bin/gallery.cgi?i=5646959
https://www.bricklink.com/catalogInvChangeItem.asp?nID=72474&nDate=12%2F2%2F2012&viewType=E&viewStatus=A&chgUserID=148415&viewDate=Y
https://www.bricklink.com/message.asp?ID=1116713
https://www.bricklink.com/catalogInvChangeItem.asp?itemType=S&itemNo=6273-1&viewDate=Y&viewStatus=1
|
|
| Author: | axaday | | Posted: | Sep 2, 2019 15:09 | | Subject: | Inventory Change Request for Set 3142-1 | | Viewed: | 16 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part x23pb04 (Not Applicable) Scala Cloth Pillow Small with Blue and Multicolor Stripe Sides Pattern
* Add 1 Part x23pb05 (Not Applicable) Scala Cloth Pillow Small with Orange and Dark Pink Sides
* Delete 1 Part x23 Blue Scala Cloth Pillow Small
* Delete 1 Part x23 Purple Scala Cloth Pillow Small
* Add 1 Part bb972 Light Turquoise Scala Handle for Wicker Basket
* Add 1 Part 33081 Light Turquoise Scala Utensil Wicker Basket
* Add 1 Part 3142stk03 (Not Applicable) Sticker for Set 3142 - Sheet 3 (22272/4125337)
* Add 1 Part 3142stk02 (Not Applicable) Sticker for Set 3142, Mirrored - Sheet 2 (71503/4107189)
|
|
| Author: | axaday | | Posted: | Sep 2, 2019 15:03 | | Subject: | Inventory Change Request for Set 5845-1 | | Viewed: | 18 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side (Extra)
Comments from Submitter:
There was an extra in my sealed set.
|
| Author: | axaday | | Posted: | Sep 2, 2019 14:23 | | Subject: | Inventory Change Request for Set 3142-1 | | Viewed: | 22 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part {Light Turquoise to Dark Turquoise} 4865 Panel 1 x 2 x 1
* Change 1 Part {Dark Pink to Light Purple} ScalaShowerStan Scala Shower Stand / Lamp Post
Comments from Submitter:
More changes to come
|
| Author: | Leinorbert | | Posted: | Sep 2, 2019 14:07 | | Subject: | Inventory Change Request for Set 75105-1 | | Viewed: | 21 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3039pb125 Black Slope 45 2 x 2 with SW Millennium Falcon Control Panel Pattern (Sticker) - Set 75105 (Counterpart)
|
|
| Author: | randyf | | Posted: | Sep 2, 2019 13:58 | | Subject: | Re: Inventory Change Request for Set 70723-1 | | Viewed: | 24 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Brixalotl writes:
| | In Inventories Requests, randyf writes:
| | In Inventories Requests, Brixalotl writes:
| | Please make changes to the following inventory:
* Add 1 Part 17114 Dark Brown Technic, Brick Modified 2 x 2 with Balls with Holes and Axle Hole (Alternate) (match ID 4)
* Add 2 Part 21459 Pearl Gold Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Capped Pommel and Holes in Crossguard and Blade (Alternate) (match ID 5)
* Change 1 Part Dark Brown 57908 Technic, Brick Modified 2 x 2 with Balls {match ID 0 to 4}
* Change 2 Part Pearl Gold 30173b Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Uncapped Pommel and Hole in Hilt {match ID 0 to 5}
Comments from Submitter:
found variants during part out, thanks
|
Did you have an extra pearl gold katana in your set?
Thanks,
Randy
|
Yes, the extra part quantities matched the current inventory
|
Thank you. I updated the inventory to contain the alternate extra.
Cheers,
Randy
|
|
| Author: | randyf | | Posted: | Sep 2, 2019 13:45 | | Subject: | Re: Inventory Change Request for Set 70722-1 | | Viewed: | 21 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Brixalotl writes:
| | In Inventories Requests, randyf writes:
| | In Inventories Requests, Brixalotl writes:
| | Please make changes to the following inventory:
* Add 2 Part 21459 Pearl Gold Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Capped Pommel and Holes in Crossguard and Blade (Alternate) (match ID 1)
* Change 2 Part Pearl Gold 30173b Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Uncapped Pommel and Hole in Hilt {match ID 0 to 1}
Comments from Submitter:
found variant during part out, thanks
|
Did you have an extra pearl gold katana in your set?
Thanks,
Randy
|
Yes, the extra quantities matches the current inventory.
|
Thank you. I updated the inventory to contain the alternate extra.
Cheers,
Randy
|
|
| Author: | Brixalotl | | Posted: | Sep 2, 2019 13:11 | | Subject: | Re: Inventory Change Request for Set 70723-1 | | Viewed: | 18 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, randyf writes:
| | In Inventories Requests, Brixalotl writes:
| | Please make changes to the following inventory:
* Add 1 Part 17114 Dark Brown Technic, Brick Modified 2 x 2 with Balls with Holes and Axle Hole (Alternate) (match ID 4)
* Add 2 Part 21459 Pearl Gold Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Capped Pommel and Holes in Crossguard and Blade (Alternate) (match ID 5)
* Change 1 Part Dark Brown 57908 Technic, Brick Modified 2 x 2 with Balls {match ID 0 to 4}
* Change 2 Part Pearl Gold 30173b Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Uncapped Pommel and Hole in Hilt {match ID 0 to 5}
Comments from Submitter:
found variants during part out, thanks
|
Did you have an extra pearl gold katana in your set?
Thanks,
Randy
|
Yes, the extra part quantities matched the current inventory
|
|
| Author: | Brixalotl | | Posted: | Sep 2, 2019 13:10 | | Subject: | Re: Inventory Change Request for Set 70722-1 | | Viewed: | 18 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, randyf writes:
| | In Inventories Requests, Brixalotl writes:
| | Please make changes to the following inventory:
* Add 2 Part 21459 Pearl Gold Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Capped Pommel and Holes in Crossguard and Blade (Alternate) (match ID 1)
* Change 2 Part Pearl Gold 30173b Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Uncapped Pommel and Hole in Hilt {match ID 0 to 1}
Comments from Submitter:
found variant during part out, thanks
|
Did you have an extra pearl gold katana in your set?
Thanks,
Randy
|
Yes, the extra quantities matches the current inventory.
|
|
| Author: | randyf | | Posted: | Sep 2, 2019 12:29 | | Subject: | Re: Inventory Change Request for Set 70722-1 | | Viewed: | 19 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Brixalotl writes:
| | Please make changes to the following inventory:
* Add 2 Part 21459 Pearl Gold Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Capped Pommel and Holes in Crossguard and Blade (Alternate) (match ID 1)
* Change 2 Part Pearl Gold 30173b Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Uncapped Pommel and Hole in Hilt {match ID 0 to 1}
Comments from Submitter:
found variant during part out, thanks
|
Did you have an extra pearl gold katana in your set?
Thanks,
Randy
|
|
| Author: | randyf | | Posted: | Sep 2, 2019 12:28 | | Subject: | Re: Inventory Change Request for Set 70723-1 | | Viewed: | 18 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Brixalotl writes:
| | Please make changes to the following inventory:
* Add 1 Part 17114 Dark Brown Technic, Brick Modified 2 x 2 with Balls with Holes and Axle Hole (Alternate) (match ID 4)
* Add 2 Part 21459 Pearl Gold Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Capped Pommel and Holes in Crossguard and Blade (Alternate) (match ID 5)
* Change 1 Part Dark Brown 57908 Technic, Brick Modified 2 x 2 with Balls {match ID 0 to 4}
* Change 2 Part Pearl Gold 30173b Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Uncapped Pommel and Hole in Hilt {match ID 0 to 5}
Comments from Submitter:
found variants during part out, thanks
|
Did you have an extra pearl gold katana in your set?
Thanks,
Randy
|
|
| Author: | yorbrick | | Posted: | Sep 2, 2019 06:45 | | Subject: | Re: Elements Exclusive to BaM | | Viewed: | 60 times | | Topic: | Catalog | |
|
| In Catalog, constructibles writes:
| | Just to add to the never-ending "identify this part" questions, it's now
been semi-officially confirmed that LEGO has created exclusive elements for the
BaM (Build a Minifgure) bins in LBR stores. I'm sure this will give more
people headaches for authenticating parts, since they will not appear in any
inventories. Looks interesting though, and I hope they keep introducing new
elements.
|
It looks like there are other exclsuive parts that are going to cause some confusion.
These pics are on eurobricks. Look at the vampire torso, very similar to Lord
Vampyre's but a different colour waistcoat and tie. So a BAM exclusive that
will probably be confused with an existing one.
The spiderwoman - look at the large spider print, it used to be located lower
and was printed across the torso and dress. So that's another two parts very
similar to existing ones from sets but exclusive to BAM.
|
|
|
| Author: | axaday | | Posted: | Sep 2, 2019 00:25 | | Subject: | Re: Inventory Change Request for Set 3142-1 | | Viewed: | 24 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, axaday writes:
| | Please make changes to the following inventory:
* Add 1 Part 3062b Brown Brick, Round 1 x 1 Open Stud
* Add 1 Part 4073 Black Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 4592c02 Red Lever Small Base with Black Lever (Extra)
* Add 1 Part 4073 Trans-Clear Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 4073 Trans-Yellow Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part sc004 Trans-Red Scala, Clothes Sunglasses (Extra)
* Delete 1 Part 33267a White Scala Support Tall, Type 1 (connector locating hole on smooth side) - 25.5 Studs Long
* Delete 3 Part 3003 Yellow Brick 2 x 2
* Add 1 Part 30145 Yellow Brick 2 x 2 x 3
* Add 1 Part 3069b Dark Turquoise Tile 1 x 2 with Groove
* Add 1 Part x16 Yellow Scala Utensil Hairbrush
* Add 4 Part x151 Yellow Rubber Band Extra Small (Square Cross Section)
* Add 1 Part x151 Yellow Rubber Band Extra Small (Square Cross Section) (Extra)
* Change {2 to 1} Part Black 3062b Brick, Round 1 x 1 Open Stud
* Change 1 Part Light Turquoise 33081c01 Scala Utensil Wicker Basket with Handle {Regular to Counterpart}
Comments from Submitter:
I will also need to create two sticker sheets to fix this inventory.
Original inventory didn't have extras, mistook a brown piece for another black one, added a large piece that I don't have and isn't in the instructions, included 3 2x2 bricks in place of one tall 2x2 brick, and omitted several pieces that were present and in the instructions. I am moving the basket to counterpart because I will be inventorying it. The basket and handle came in separate bags in the set.
|
|
|
|
| Author: | axaday | | Posted: | Sep 2, 2019 00:23 | | Subject: | Inventory Change Request for Set 3142-1 | | Viewed: | 24 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3062b Brown Brick, Round 1 x 1 Open Stud
* Add 1 Part 4073 Black Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 4592c02 Red Lever Small Base with Black Lever (Extra)
* Add 1 Part 4073 Trans-Clear Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 4073 Trans-Yellow Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part sc004 Trans-Red Scala, Clothes Sunglasses (Extra)
* Delete 1 Part 33267a White Scala Support Tall, Type 1 (connector locating hole on smooth side) - 25.5 Studs Long
* Delete 3 Part 3003 Yellow Brick 2 x 2
* Add 1 Part 30145 Yellow Brick 2 x 2 x 3
* Add 1 Part 3069b Dark Turquoise Tile 1 x 2 with Groove
* Add 1 Part x16 Yellow Scala Utensil Hairbrush
* Add 4 Part x151 Yellow Rubber Band Extra Small (Square Cross Section)
* Add 1 Part x151 Yellow Rubber Band Extra Small (Square Cross Section) (Extra)
* Change {2 to 1} Part Black 3062b Brick, Round 1 x 1 Open Stud
* Change 1 Part Light Turquoise 33081c01 Scala Utensil Wicker Basket with Handle {Regular to Counterpart}
Comments from Submitter:
I will also need to create two sticker sheets to fix this inventory.
Original inventory didn't have extras, mistook a brown piece for another black one, added a large piece that I don't have and isn't in the instructions, included 3 2x2 bricks in place of one tall 2x2 brick, and omitted several pieces that were present and in the instructions. I am moving the basket to counterpart because I will be inventorying it. The basket and handle came in separate bags in the set.
|
|
| Author: | Brixalotl | | Posted: | Sep 1, 2019 21:52 | | Subject: | Inventory Change Request for Set 70722-1 | | Viewed: | 23 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 21459 Pearl Gold Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Capped Pommel and Holes in Crossguard and Blade (Alternate) (match ID 1)
* Change 2 Part Pearl Gold 30173b Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Uncapped Pommel and Hole in Hilt {match ID 0 to 1}
Comments from Submitter:
found variant during part out, thanks
|
|
| Author: | Brixalotl | | Posted: | Sep 1, 2019 18:57 | | Subject: | Inventory Change Request for Set 70723-1 | | Viewed: | 28 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 17114 Dark Brown Technic, Brick Modified 2 x 2 with Balls with Holes and Axle Hole (Alternate) (match ID 4)
* Add 2 Part 21459 Pearl Gold Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Capped Pommel and Holes in Crossguard and Blade (Alternate) (match ID 5)
* Change 1 Part Dark Brown 57908 Technic, Brick Modified 2 x 2 with Balls {match ID 0 to 4}
* Change 2 Part Pearl Gold 30173b Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Uncapped Pommel and Hole in Hilt {match ID 0 to 5}
Comments from Submitter:
found variants during part out, thanks
|
|
| Author: | Dino | | Posted: | Sep 1, 2019 17:14 | | Subject: | Inventory Change Request for Gear wufo | | Viewed: | 28 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Gear bbw046 Black Watch, Case and Movement with LEGO and Spyrius Droid
Comments from Submitter:
This watch is not in this watch set.
|
|
|
| Author: | Turez | | Posted: | Sep 1, 2019 13:08 | | Subject: | Inventory Change Request for Set 7905-1 | | Viewed: | 14 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Black {x77cc200 String, Cord Medium Thickness 200cm to x77ac200 String, Cord Thin 200cm}
* Change 8 Part Light Bluish Gray {2453 Brick 1 x 1 x 5 - Undetermined Stud Type to 2453a Brick 1 x 1 x 5 - Blocked Open Stud or Hollow Stud}
Comments from Submitter:
Based on https://www.bricklink.com/messageThread.asp?ID=256400&nID=1153892
2453a: 2453b first appeared around 2012, so only 2453a is possible here.
|
|
| Author: | Turez | | Posted: | Sep 1, 2019 12:47 | | Subject: | Re: Inventory Change Request for Set 4996-1 | | Viewed: | 15 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Turez writes:
| | Please make changes to the following inventory:
* Change 4 Part Yellow {2453 Brick 1 x 1 x 5 - Undetermined Stud Type to 2453a Brick 1 x 1 x 5 - Blocked Open Stud or Hollow Stud}
Comments from Submitter:
Set unboxing and building at http://www.brickshelf.com/cgi-bin/gallery.cgi?f=399833
|
|
|
|
| Author: | Turez | | Posted: | Sep 1, 2019 12:46 | | Subject: | Inventory Change Request for Set 4996-1 | | Viewed: | 15 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 4 Part Yellow {2453 Brick 1 x 1 x 5 - Undetermined Stud Type to 2453a Brick 1 x 1 x 5 - Blocked Open Stud or Hollow Stud}
Comments from Submitter:
Set unboxing and building at http://www.brickshelf.com/cgi-bin/gallery.cgi?f=399833
|
|
| Author: | Hygrotus | | Posted: | Sep 1, 2019 12:14 | | Subject: | Inventory Change Request for Set 70830-1 | | Viewed: | 17 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part x1435pb028 Trans-Clear Flag 5 x 6 Hexagonal with Dark Turquoise Lines, Rectangles, Squares and Alien Characters Pattern (Sticker) - Set 70830 (Counterpart)
* Add 1 Part 60581pb125 White Panel 1 x 4 x 3 with Side Supports - Hollow Studs with Systar System Stellar Map Pattern (Sticker) - Set 70830 (Counterpart)
* Add 1 Part 59349pb160 White Panel 1 x 6 x 5 with Monitors and Minifigure Pattern (Sticker) - Set 70830 (Counterpart)
* Add 1 Part 50955pb038 White Wedge 10 x 3 Left with Magenta Stripe and Outlined Triangle on Transparent Background Pattern (Sticker) - Set 70830 (Counterpart)
* Add 1 Part 50956pb039 White Wedge 10 x 3 Right with Magenta Stripe, Outlined Triangle and Alien Characters on Transparent Background Pattern (Sticker) - Set 70830 (Counterpart)
|
|
| Author: | Turez | | Posted: | Sep 1, 2019 11:09 | | Subject: | Re: Inventory Change Request for Set 40041-1 | | Viewed: | 11 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Turez writes:
| | Please make changes to the following inventory:
* Change 1 Part White {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
sealed set contents, ebay 293206073293
|
|
|
|
| Author: | Turez | | Posted: | Sep 1, 2019 11:09 | | Subject: | Inventory Change Request for Set 40041-1 | | Viewed: | 15 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part White {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
sealed set contents, ebay 293206073293
|
|
| Author: | Turez | | Posted: | Sep 1, 2019 11:04 | | Subject: | Re: Inventory Change Request for Set 40064-1 | | Viewed: | 13 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Turez writes:
| | Please make changes to the following inventory:
* Change 1 Part White {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
sealed set contents, ebay 293206071919
|
|
|
|
| Author: | Turez | | Posted: | Sep 1, 2019 11:03 | | Subject: | Inventory Change Request for Set 40064-1 | | Viewed: | 14 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part White {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
sealed set contents, ebay 293206071919
|
|
|
| Author: | Hygrotus | | Posted: | Sep 1, 2019 10:13 | | Subject: | Inventory Change Request for Set 70830-1 | | Viewed: | 17 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 44302a Dark Bluish Gray Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove (Alternate) (match ID 1)
* Change 2 Part Dark Bluish Gray 44302b Hinge Plate 1 x 2 Locking with 2 Fingers on End without Bottom Groove {match ID 0 to 1}
Comments from Submitter:
Have this variant in my own just build from new sealed one
|
|
| Author: | Hygrotus | | Posted: | Sep 1, 2019 05:52 | | Subject: | Inventory Change Request for Set 7691-1 | | Viewed: | 41 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 50955pb029 Black Wedge 10 x 3 Left with Light Bars and Alien Characters Pattern on Top (Sticker) - Set 7691 (Counterpart)
|
|
| Author: | Hygrotus | | Posted: | Sep 1, 2019 05:52 | | Subject: | Inventory Change Request for Set 60195-1 | | Viewed: | 24 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 45677pb117 Orange Wedge 4 x 4 x 2/3 Triple Curved with 'EMERGENCY EXIT' and Hatch Pattern (Sticker) - Set 60195 (Counterpart)
* Add 1 Part 52031pb129 Orange Wedge 4 x 6 x 2/3 Triple Curved with Arctic Explorer Logo on Orange Background Pattern (Sticker) - Set 60195 (Counterpart)
|
|
| Author: | Hygrotus | | Posted: | Sep 1, 2019 05:50 | | Subject: | Inventory Change Request for Set 41313-1 | | Viewed: | 23 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 14769pb286 Dark Purple Tile, Round 2 x 2 with Bottom Stud Holder with Star and Floral Ornament Pattern (Sticker) - Set 41313 (Counterpart)
|
|
| Author: | Hygrotus | | Posted: | Sep 1, 2019 05:49 | | Subject: | Inventory Change Request for Set 41334-1 | | Viewed: | 21 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 87079pb619 White Tile 2 x 4 with 'MENU', Hotdog and Beverage Pattern (Sticker) - Set 41334 (Counterpart)
* Add 1 Part 87079pb620 Tan Tile 2 x 4 with Theater Stars and Music Notes Pattern (Sticker) - Set 41334 (Counterpart)
|
|
| Author: | Hygrotus | | Posted: | Sep 1, 2019 05:47 | | Subject: | Inventory Change Request for Set 75055-1 | | Viewed: | 20 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 2431pb589 Light Bluish Gray Tile 1 x 4 with SW Star Destroyer Triangles and Rectangles Pattern (Sticker) - Set 75055 (Counterpart)
|
|
| Author: | Hygrotus | | Posted: | Sep 1, 2019 05:45 | | Subject: | Inventory Change Request for Set 42000-1 | | Viewed: | 21 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 64392pb023 Red Technic, Panel Fairing #17 Large Smooth, Side A with Number 71 and 'FRAME WORK' Pattern (Sticker) - Set 42000 (Counterpart)
* Add 1 Part 64682pb023 Red Technic, Panel Fairing #18 Large Smooth, Side B with Number 71 and 'FRAME WORK' Pattern (Sticker) - Set 42000 (Counterpart)
|
|
| Author: | Hygrotus | | Posted: | Sep 1, 2019 05:44 | | Subject: | Inventory Change Request for Set 42072-1 | | Viewed: | 21 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 64683pb052 Lime Technic, Panel Fairing # 3 Small Smooth Long, Side A with '88', Fuel Hole, Yellow and White Stripes on Lime Background Pattern (Sticker) - Set 42072 (Counterpart)
* Add 1 Part 64391pb052 Lime Technic, Panel Fairing # 4 Small Smooth Long, Side B with '88', Fuel Hole, Yellow and White Stripes on Lime Background Pattern (Sticker) - Set 42072 (Counterpart)
* Add 1 Part 2431pb598 Lime Tile 1 x 4 with Engine on Lime Background Pattern (Sticker) - Set 42072 (Counterpart)
|
|
| Author: | Hygrotus | | Posted: | Sep 1, 2019 05:43 | | Subject: | Inventory Change Request for Set 42073-1 | | Viewed: | 24 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 64683pb051 Red Technic, Panel Fairing # 3 Small Smooth Long, Side A with '01', Fuel Hole and White Stripe on Black Background Pattern (Sticker) - Set 42073 (Counterpart)
* Add 1 Part 64391pb051 Red Technic, Panel Fairing # 4 Small Smooth Long, Side B with '01', Fuel Hole and White Stripe on Black Background Pattern (Sticker) - Set 42073 (Counterpart)
* Add 1 Part 2431pb597 Red Tile 1 x 4 with Engine on Red Background Pattern (Sticker) - Set 42073 (Counterpart)
|
|
| Author: | Hygrotus | | Posted: | Sep 1, 2019 05:42 | | Subject: | Inventory Change Request for Set 5979-1 | | Viewed: | 11 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 61069pb013 White Technic, Panel Engine Block Half / Side Intake with Black Stripe and 'SPECIAL TRANSPORT' Pattern (Sticker) - Set 5979 (Counterpart)
|
| Author: | Hygrotus | | Posted: | Sep 1, 2019 05:39 | | Subject: | Inventory Change Request for Set 7890-1 | | Viewed: | 25 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part BA78pb02 Trans-Light Blue Stickered Assembly 4 x 1 x 2 with 7 Horizontal White Stripes Pattern (Sticker) - Set 7890 - 2 Panels 1 x 2 x 2 (Counterpart)
|
|
| Author: | Hygrotus | | Posted: | Sep 1, 2019 05:37 | | Subject: | Inventory Change Request for Set 6394-1 | | Viewed: | 25 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part BA37pb02 White Stickered Assembly 3 x 1 x 2 1/3 with Shell Logo Pattern (Sticker) - Set 6394 - 2 Bricks 1 x 3, 1 Plate 1 x 3 (Counterpart)
Comments from Submitter:
There are two the same stickers on this sticker sheet but instruction shows sticker applied only on one side (page16). We can assume that maybe on the other side second could be applied but there is no evidence to that. So describtion is that sticker is only on one side.
|
|
| Author: | Hygrotus | | Posted: | Sep 1, 2019 05:32 | | Subject: | Inventory Change Request for Set 3243-1 | | Viewed: | 14 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 6962pb05 Light Violet Scala Television / Computer Monitor with with Three People and Ballons Pattern (Sticker) - Set 3243 (Counterpart)
* Add 1 Part 6953pb10 Salmon Scala Wall, Panel 6 x 10 with Beach Umbrella and Sun Pattern (Sticker) - Set 3243 (Counterpart)
|
|
| Author: | Hygrotus | | Posted: | Sep 1, 2019 05:30 | | Subject: | Inventory Change Request for Set 3200-1 | | Viewed: | 15 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 33007pb03 Salmon Scala Utensil Suitcase with Kangaroo and Sydney Opera House Pattern (Sticker) - Set 3200 (Counterpart)
|
| Author: | Hygrotus | | Posted: | Sep 1, 2019 05:30 | | Subject: | Inventory Change Request for Set 3201-1 | | Viewed: | 16 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 6965pb01 Salmon Scala Platform / Table 7 x 7 x 1 1/3 with 4 Legs with Plaid and Roses Tablecloth Pattern (Sticker) - Set 3201 (Counterpart)
|
| Author: | Hygrotus | | Posted: | Sep 1, 2019 05:29 | | Subject: | Inventory Change Request for Set 3202-1 | | Viewed: | 13 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 6874pb05 Light Salmon Scala Dresser without Top with Pink Ornament Pattern on Both Sides (Stickers) - Set 3202 (Counterpart)
|
| Author: | Hygrotus | | Posted: | Sep 1, 2019 05:27 | | Subject: | Inventory Change Request for Set 3290-1 | | Viewed: | 15 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 6896apb02 Salmon Scala Door Mullioned - top and bottom dimples 10 x 1 x 18 2/3 with Leaves, Flower and Lines Pattern on Both Sides (Stickers) - Set 3290 (Counterpart)
|
|
| Author: | Hygrotus | | Posted: | Sep 1, 2019 05:25 | | Subject: | Inventory Change Request for Set 3270-1 | | Viewed: | 13 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 6896apb01 Salmon Scala Door Mullioned - top and bottom dimples 10 x 1 x 18 2/3 with Hearts and Lines Pattern on Both Sides (Stickers) - Set 3270 (Counterpart)
* Add 1 Part 6934apb01 Very Light Gray Tile 3 x 6 (Scala) with Cooktop Pattern (Sticker) - Set 3270 (Counterpart)
|
|
| Author: | Hygrotus | | Posted: | Sep 1, 2019 05:22 | | Subject: | Inventory Change Request for Set 41174-1 | | Viewed: | 16 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 13459pb009 Black Road Sign Round on Pole with Starlight Inn Sleeping Dragon Pattern on Both Sides (Stickers) - Set 41174 (Counterpart)
|
|
| Author: | Hygrotus | | Posted: | Sep 1, 2019 05:19 | | Subject: | Inventory Change Request for Set 7686-1 | | Viewed: | 15 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 52035c01pb08 Orange Motorcycle City with Black Chassis, LBG Wheels and Fairing with Tow Truck Danger Sign on Front and White and Black Lines on Both Sides Pattern (Stickers) - Set 7686 (Counterpart)
|
|
| Author: | Hygrotus | | Posted: | Sep 1, 2019 05:17 | | Subject: | Inventory Change Request for Set 10252-1 | | Viewed: | 16 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 60581pb122R Trans-Clear Panel 1 x 4 x 3 with Side Supports - Hollow Studs with Dark Azure Curve Pattern Model Right Side (Sticker) - Set 10252 (Counterpart)
* Add 1 Part 60581pb123 Trans-Clear Panel 1 x 4 x 3 with Side Supports - Hollow Studs with Dark Azure Stripe, Orange Exclamation Mark and 'Al's BOARDS' Pattern (Stickers) - Set 10252 (Counterpart)
|
|
| Author: | Hygrotus | | Posted: | Sep 1, 2019 05:16 | | Subject: | Inventory Change Request for Set 41341-1 | | Viewed: | 16 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 62698pb12 Black Minifigure, Utensil Computer Laptop with Sound Recording Display (Sticker) - Set 41341 (Counterpart)
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
Belgium
USA, Indiana
Switzerland, Vaud
)
)
)
Netherlands, Zuid-Holland
United Kingdom, England
Canada, British Columbia
)
)
)
)
)
Germany, Niedersachsen
Italy, Trentino-Alto Adige
)
)
)
Luxembourg
Poland, w. Wielkopolskie
