Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | hpoort | Posted: | May 26, 2019 03:24 | Subject: | Re: 4070a | Viewed: | 38 times | Topic: | Catalog | |
|
| In Catalog, randyf writes:
| In Catalog, Brickitty writes:
| In Catalog, tEoS writes:
| Yes, BL has decided not to differentiate between these.
In Catalog, seymour3113 writes:
| I have several of these bricks (4070a). They are being deleted from catalog.
Should I just list them as 4070?
|
|
Thankfully, since there are so many headlight bricks with varying levels of partial
holes. It was definitely a manufacturing defect.
Now if we could just get rid of the ridiculous entries for "smooth slopes."
|
This is something we are going to look into. From what I have seen over the years,
there is no real "smooth slopes" for some of those parts (or any of them). What
they are are parts that come from molds where the sand-blasted texture has been
worn down over time making the slopes look more smooth than others that were
produced when the molds were new. One thing is for certain - none of them are
smooth like real smooth-molded slopes such as
Cheers,
Randy
|
Don't forget about versus with complete, intended smoothness
in the a-version.
Hans-Peter
|
|
Author: | clrv4000 | Posted: | May 25, 2019 21:47 | Subject: | Re: Mystery part | Viewed: | 63 times | Topic: | Catalog | |
|
| In Catalog, dkillgore writes:
| In Catalog, clrv4000 writes:
| In Catalog, dkillgore writes:
| In Catalog, Hygrotus writes:
| I have pending approval something like this
[p=Unknown]
Did anybody see something like this? Anybody knows anything about it?
|
So, no other numbers or marks anywhere on it?
Like others, I can see countless problems to solve with this but like others
before me, steer clear of Bionicles...looks suspiciously like Bionicle instead
of our endeared Technic
|
Speaking of Bionicle, you could have one of those common Technic ball-joint
balls (32474 or 53585) with just a stud sticking out the side when combined with
such a piece. That's got me brainstorming...
|
Okayyyyy- now I see it! You may be right!
|
Sort of reminds me of this thing someone 3D printed:
https://www.myminifactory.com/de/object/3d-print-1l-lego-technic-liftarm-81004
Of course you wouldn't want to get THAT stuck in a 32474! (I occasionally
run into a similar 'homemade solution' when I find 1L axle stubs snapped
off of Bionicle detail parts in used LEGO batches. I had to drill a tiny center
hole and drive a fine screw into the bit to remove it on a couple occasions.)
|
|
Author: | bb1237701 | Posted: | May 25, 2019 21:27 | Subject: | Re: Mystery part | Viewed: | 40 times | Topic: | Catalog | |
|
| In Catalog, clrv4000 writes:
| In Catalog, dkillgore writes:
| In Catalog, Hygrotus writes:
| I have pending approval something like this
[p=Unknown]
Did anybody see something like this? Anybody knows anything about it?
|
So, no other numbers or marks anywhere on it?
Like others, I can see countless problems to solve with this but like others
before me, steer clear of Bionicles...looks suspiciously like Bionicle instead
of our endeared Technic
|
Speaking of Bionicle, you could have one of those common Technic ball-joint
balls (32474 or 53585) with just a stud sticking out the side when combined with
such a piece. That's got me brainstorming...
|
Okayyyyy- now I see it! You may be right!
|
|
Author: | clrv4000 | Posted: | May 25, 2019 21:22 | Subject: | Re: Mystery part | Viewed: | 33 times | Topic: | Catalog | |
|
| In Catalog, dkillgore writes:
| In Catalog, Hygrotus writes:
| I have pending approval something like this
[p=Unknown]
Did anybody see something like this? Anybody knows anything about it?
|
So, no other numbers or marks anywhere on it?
Like others, I can see countless problems to solve with this but like others
before me, steer clear of Bionicles...looks suspiciously like Bionicle instead
of our endeared Technic
|
Speaking of Bionicle, you could have one of those common Technic ball-joint
balls (32474 or 53585) with just a stud sticking out the side when combined with
such a piece. That's got me brainstorming...
|
|
Author: | bb1237701 | Posted: | May 25, 2019 21:11 | Subject: | Re: Mystery part | Viewed: | 36 times | Topic: | Catalog | |
|
| In Catalog, Hygrotus writes:
| I have pending approval something like this
[p=Unknown]
Did anybody see something like this? Anybody knows anything about it?
|
So, no other numbers or marks anywhere on it?
Like others, I can see countless problems to solve with this but like others
before me, steer clear of Bionicles...looks suspiciously like Bionicle instead
of our endeared Technic
|
|
Author: | WoutR | Posted: | May 25, 2019 21:03 | Subject: | Re: Mystery part | Viewed: | 31 times | Topic: | Catalog | |
|
| In Catalog, Hygrotus writes:
| I have pending approval something like this
[p=Unknown]
Did anybody see something like this? Anybody knows anything about it?
|
I *had* seen it, probably at the same time as the new 2x4 brick with axle holes
and that technic connector block...
But I can't find it so I probably noticed the part when I was looking at
new items pending approval in our catalog...
|
|
Author: | clrv4000 | Posted: | May 25, 2019 20:22 | Subject: | Re: Mystery part | Viewed: | 34 times | Topic: | Catalog | |
|
| In Catalog, Hygrotus writes:
| I have pending approval something like this
[p=Unknown]
Did anybody see something like this? Anybody knows anything about it?
|
All I can say is that I really would like a part like that! I can already
think of some situations I could have solved easily with that. Hopefully some
sleuth can sort this out for us. Please keep us updated.
|
|
Author: | randyf | Posted: | May 25, 2019 18:15 | Subject: | Re: 4070a | Viewed: | 41 times | Topic: | Catalog | |
|
| In Catalog, Brickitty writes:
| In Catalog, tEoS writes:
| Yes, BL has decided not to differentiate between these.
In Catalog, seymour3113 writes:
| I have several of these bricks (4070a). They are being deleted from catalog.
Should I just list them as 4070?
|
|
Thankfully, since there are so many headlight bricks with varying levels of partial
holes. It was definitely a manufacturing defect.
Now if we could just get rid of the ridiculous entries for "smooth slopes."
|
This is something we are going to look into. From what I have seen over the years,
there is no real "smooth slopes" for some of those parts (or any of them). What
they are are parts that come from molds where the sand-blasted texture has been
worn down over time making the slopes look more smooth than others that were
produced when the molds were new. One thing is for certain - none of them are
smooth like real smooth-molded slopes such as
Cheers,
Randy
|
|
Author: | manganschlamm | Posted: | May 25, 2019 16:02 | Subject: | Re: 4070a | Viewed: | 39 times | Topic: | Catalog | |
|
| In Catalog, Brickitty writes:
| In Catalog, tEoS writes:
| Yes, BL has decided not to differentiate between these.
In Catalog, seymour3113 writes:
| I have several of these bricks (4070a). They are being deleted from catalog.
Should I just list them as 4070?
|
|
Thankfully, since there are so many headlight bricks with varying levels of partial
holes. It was definitely a manufacturing defect.
Now if we could just get rid of the ridiculous entries for "smooth slopes."
|
Why do you think that smooth slopes is not an appropriate entry? I actually prefer
textured slopes and when I order textured slopes and get smooth slopes it does
not make me happy.
|
|
Author: | Brickitty | Posted: | May 25, 2019 15:18 | Subject: | Re: 4070a | Viewed: | 52 times | Topic: | Catalog | |
|
| In Catalog, tEoS writes:
| Yes, BL has decided not to differentiate between these.
In Catalog, seymour3113 writes:
| I have several of these bricks (4070a). They are being deleted from catalog.
Should I just list them as 4070?
|
|
Thankfully, since there are so many headlight bricks with varying levels of partial
holes. It was definitely a manufacturing defect.
Now if we could just get rid of the ridiculous entries for "smooth slopes."
|
Author: | tEoS | Posted: | May 25, 2019 14:34 | Subject: | Re: 4070a | Viewed: | 41 times | Topic: | Catalog | |
|
| Yes, BL has decided not to differentiate between these.
In Catalog, seymour3113 writes:
| I have several of these bricks (4070a). They are being deleted from catalog.
Should I just list them as 4070?
|
|
Author: | seymour3113 | Posted: | May 25, 2019 14:10 | Subject: | 4070a | Viewed: | 125 times | Topic: | Catalog | Status: | Open | |
|
| I have several of these bricks (4070a). They are being deleted from catalog.
Should I just list them as 4070?
|
Author: | Stuart9 | Posted: | May 23, 2019 10:13 | Subject: | Old Mosaic pieces. | Viewed: | 113 times | Topic: | Catalog | Status: | Open | |
|
| Can I ask what proof is required to submit the rectangular version of the 3062oldtile
?
I have both the one shown below and the rectangular version without stud that
I suppose would be something like 3005oldtile.
Not ready to list just yet but might want to do so sometime this year.
[p=3062oldtile]
|
|
Author: | sheppy02 | Posted: | May 22, 2019 06:40 | Subject: | Re: which is the correct listing? | Viewed: | 35 times | Topic: | Catalog | |
|
| In Catalog, yorbrick writes:
| | Which is why my part didn't show up properly, most
people are listed as
whereas really they should be
|
There are 87 of the "set", whereas there are 4294 listings for the part. So most
people have listed them as the single part. The sealed ones listed as sets are
likely to be correct, as are the used ones listed as sets as they do not need
to contain the packaging (although the listing should say that).
If you have plenty of a single part set (or single minifigure set), it is often
a good idea to list some as the part (or minifigure) and some as the set, as
different buys will search for different things.
|
Thanks, that is very helpful
Alex
|
|
Author: | yorbrick | Posted: | May 22, 2019 06:12 | Subject: | Re: which is the correct listing? | Viewed: | 33 times | Topic: | Catalog | |
|
| | Which is why my part didn't show up properly, most
people are listed as
whereas really they should be
|
There are 87 of the "set", whereas there are 4294 listings for the part. So most
people have listed them as the single part. The sealed ones listed as sets are
likely to be correct, as are the used ones listed as sets as they do not need
to contain the packaging (although the listing should say that).
If you have plenty of a single part set (or single minifigure set), it is often
a good idea to list some as the part (or minifigure) and some as the set, as
different buys will search for different things.
|
|
Author: | sheppy02 | Posted: | May 22, 2019 05:58 | Subject: | Re: which is the correct listing? | Viewed: | 41 times | Topic: | Catalog | |
|
| In Catalog, NelisSolis writes:
| In Catalog, sheppy02 writes:
| Hello All,
I am just listing some items, I had one
[p=630-3]
trying to find the others in my inventory no joy, searched by brick separator
my others are listed
which are up for approx. 8 times the price. what is the difference? or are they
essentially the same products?
Thanks
Alex
|
the is a set (service pack) with only 1 part and the is the
part in that set.
|
Thanks Nelis,
Which is why my part didn't show up properly, most
people are listed as
whereas really they should be
Alex
|
|
Author: | NelisSolis | Posted: | May 22, 2019 05:50 | Subject: | Re: which is the correct listing? | Viewed: | 38 times | Topic: | Catalog | |
|
| In Catalog, sheppy02 writes:
| Hello All,
I am just listing some items, I had one
[p=630-3]
trying to find the others in my inventory no joy, searched by brick separator
my others are listed
which are up for approx. 8 times the price. what is the difference? or are they
essentially the same products?
Thanks
Alex
|
the is a set (service pack) with only 1 part and the is the
part in that set.
|
|
Author: | sheppy02 | Posted: | May 22, 2019 05:40 | Subject: | which is the correct listing? | Viewed: | 113 times | Topic: | Catalog | Status: | Open | |
|
| Hello All,
I am just listing some items, I had one
[p=630-3]
trying to find the others in my inventory no joy, searched by brick separator
my others are listed
which are up for approx. 8 times the price. what is the difference? or are they
essentially the same products?
Thanks
Alex
|
|
Author: | Cob | Posted: | May 20, 2019 17:11 | Subject: | Re: Protest of 3830c01 marked for deletion | Viewed: | 96 times | Topic: | Catalog | |
|
| | But the reason we can't do that with the hinge brick is because Lego does
not issue the part as an assembly. They never have and likely never will.
|
LEGO doesn't issue BrickArms either but BrickLink has BrickArms on the website.
They never have and likely never will.
|
|
Author: | Admin_Russell | Posted: | May 20, 2019 12:51 | Subject: | Re: Protest of 3830c01 marked for deletion | Viewed: | 121 times | Topic: | Catalog | |
|
|
BrickLink ID CardAdmin_Russell
|
Location: USA, California |
Member Since |
Contact |
Type |
Status |
May 9, 2017 |
|
Admin |
|
|
BrickLink Administrator |
|
| In Catalog, mnementh writes:
| In Catalog, JusTiCe8 writes:
| Especially when considering the reason why it has been marked:
"This item was marked for deletion because it sets a precedent for adding
dozens of unnecessary combinations of hinges as assemblies to the catalog."
|
And meanwhile, we now have 14 recently created entries for mixed color 3937/
3738 Hinges.
https://www.bricklink.com/v2/catalog/catalogitem.page?P=3937c15#T=C
That decision goes directly AGAINST the catalog policy, so I deem those entries
to be stupid and unnecessary.
I believe keeping the 3830c01 single color combos is the right thing to do.
I dislike when admins forget that this is a COMMERCE website first and foremost
and does not exist to maintain a "pure" catalog.
3830c01 has been bought and sold THOUSANDS of times over the past 18 years and
it is clearly the preferred form for both buying and selling.
|
The decision to get rid of the brick hinge and add plate hinge had NOTHING to
do with any kind of purist notion. Rather, it was a decision based solely on
commercial concerns.
When a large portion of sellers list things as an assembly instead of the individual
parts, the listings are effectively split, meaning that for the part in question,
BrickLink's listing strength is diminished. What starts out as a well-meaning
idea based on someone's personal listing preferences then works its way through
the system as an ineffeciency, leading to more complicated wanted list assembly
and maintenance and a lot of missed hits from things like Easy Buy and traffic
that comes to us via Brickset and the Lego replacements parts website.
For that reason, we do not want assemblies in the catalog that have no good rationale
for their existence. The plate assemblies are very useful for sellers of used
parts because they don't have to pull the assemblies apart to list them.
The plate hinges break frequently when they are older.
The brick hinge, to my knowledge, does not break when disassembled. Neither is
it part of a larger class of items that can as a whole be treated as an assembly
- such as wheels and tires.
And lest people forget, this brick hinge assembly was completely removed from
inventories many years ago by Dan himself in what I believe to be was the first
step in decommissioning the entry altogether.
Regarding the idea that we could use the assembly *instead* of the individual
parts as the entry of choice on the site - this is kind of thinking that produced
this entry:
* | | 8c01 (Inv) Plate, Modified 2 x 2 with Wheel Holder Bottom with Red Wheel with Black Tire 14mm D. x 4mm Smooth Small Single (8 / 3464c01) Parts: Aircraft |
It's just easier and simpler for everyone to use the assembly, and little
by little the assemblies are taking precedence over the individual parts in both
listings and sales.
But the reason we can't do that with the hinge brick is because Lego does
not issue the part as an assembly. They never have and likely never will. This
places a constraint on us, because we want to line up our catalog as much as
possible with the way bricks are treated by them. That way there is a smooth
pipeline through the supply chain. This is the same reason we started using multipacks:
|
|
Author: | mnementh | Posted: | May 20, 2019 11:34 | Subject: | Re: Protest of 3830c01 marked for deletion | Viewed: | 89 times | Topic: | Catalog | |
|
| In Catalog, JusTiCe8 writes:
| Especially when considering the reason why it has been marked:
"This item was marked for deletion because it sets a precedent for adding
dozens of unnecessary combinations of hinges as assemblies to the catalog."
|
And meanwhile, we now have 14 recently created entries for mixed color 3937/
3738 Hinges.
https://www.bricklink.com/v2/catalog/catalogitem.page?P=3937c15#T=C
That decision goes directly AGAINST the catalog policy, so I deem those entries
to be stupid and unnecessary.
I believe keeping the 3830c01 single color combos is the right thing to do.
I dislike when admins forget that this is a COMMERCE website first and foremost
and does not exist to maintain a "pure" catalog.
3830c01 has been bought and sold THOUSANDS of times over the past 18 years and
it is clearly the preferred form for both buying and selling.
.
|
|
Author: | tons_of_bricks | Posted: | May 20, 2019 06:48 | Subject: | Re: Protest of 3830c01 marked for deletion | Viewed: | 58 times | Topic: | Catalog | |
|
| In Catalog, yorbrick writes:
| In Catalog, Cob writes:
| In protest of 3830c01 being marked for deletion I am not going to sell either
3830 or 3831 on BrickLink.
I sell used bricks, nearly all of these come to me as a complete hinge, in order
to sell them I must either sell them as a pair or manually separate them and
then list them separately.
I still don't understand why they were marked for deletion. There only single
colors in the catalog, no crossed colors, no decorated items. Nothing but plain
single colors.
I will sell them on other well known sites.
Cob
|
While this piece is being discussed, I have always found the name odd. It only
looks like a 1x4 hinge brick when it is paired together. Therefore if it is not
paired, then the parts are not a 1x4 brick. They look like 1x2 bricks with a
bit of modification.
LEGO refers to the individual pieces as a "hinge 1x2 upper part" or "lower part".
Which makes more sense when you are searching for it.
And in terms of setting a precedent:
|
I believe they have all those colored listings simple because of the difficulty
of taking those two pieces apart. I have broken several trying to do so. With
the 1x4 hinge brick, the pieces can come apart easily. I do not see the Cob's
problem at all. You make more money off of the two pieces if you sell them separately
than together. And it's only one listing more; not like it's a five piece
assembly you now have to disassemble. It's only two pieces.
|
|
Author: | yorbrick | Posted: | May 20, 2019 06:22 | Subject: | Re: Protest of 3830c01 marked for deletion | Viewed: | 58 times | Topic: | Catalog | |
|
| In Catalog, Cob writes:
| In protest of 3830c01 being marked for deletion I am not going to sell either
3830 or 3831 on BrickLink.
I sell used bricks, nearly all of these come to me as a complete hinge, in order
to sell them I must either sell them as a pair or manually separate them and
then list them separately.
I still don't understand why they were marked for deletion. There only single
colors in the catalog, no crossed colors, no decorated items. Nothing but plain
single colors.
I will sell them on other well known sites.
Cob
|
While this piece is being discussed, I have always found the name odd. It only
looks like a 1x4 hinge brick when it is paired together. Therefore if it is not
paired, then the parts are not a 1x4 brick. They look like 1x2 bricks with a
bit of modification.
LEGO refers to the individual pieces as a "hinge 1x2 upper part" or "lower part".
Which makes more sense when you are searching for it.
And in terms of setting a precedent:
|
|
Author: | WhiteHorseMatt | Posted: | May 20, 2019 05:33 | Subject: | Re: Protest of 3830c01 marked for deletion | Viewed: | 63 times | Topic: | Catalog | |
|
| In Catalog, JusTiCe8 writes:
| Especially when considering the reason why it has been marked:
"This item was marked for deletion because it sets a precedent for adding
dozens of unnecessary combinations of hinges as assemblies to the catalog."
Whereas it is impossible AFAIK to pick one color per sub-item (minifigs are defined
as "complete set", you can't pick one and choose other legs colour for instance).
In Catalog, Cob writes:
| In protest of 3830c01 being marked for deletion I am not going to sell either
3830 or 3831 on BrickLink.
I sell used bricks, nearly all of these come to me as a complete hinge, in order
to sell them I must either sell them as a pair or manually separate them and
then list them separately.
I still don't understand why they were marked for deletion. There only single
colors in the catalog, no crossed colors, no decorated items. Nothing but plain
single colors.
I will sell them on other well known sites.
Cob
|
|
Not saying it should be deleted, but that reason is valid. There are plenty
of sets where the two parts have different colours. Why would those combinations
not be available to buy?
|
|
Author: | JusTiCe8 | Posted: | May 20, 2019 05:20 | Subject: | Re: Protest of 3830c01 marked for deletion | Viewed: | 74 times | Topic: | Catalog | |
|
| Especially when considering the reason why it has been marked:
"This item was marked for deletion because it sets a precedent for adding
dozens of unnecessary combinations of hinges as assemblies to the catalog."
Whereas it is impossible AFAIK to pick one color per sub-item (minifigs are defined
as "complete set", you can't pick one and choose other legs colour for instance).
In Catalog, Cob writes:
| In protest of 3830c01 being marked for deletion I am not going to sell either
3830 or 3831 on BrickLink.
I sell used bricks, nearly all of these come to me as a complete hinge, in order
to sell them I must either sell them as a pair or manually separate them and
then list them separately.
I still don't understand why they were marked for deletion. There only single
colors in the catalog, no crossed colors, no decorated items. Nothing but plain
single colors.
I will sell them on other well known sites.
Cob
|
|
|
Author: | Cob | Posted: | May 19, 2019 15:56 | Subject: | Protest of 3830c01 marked for deletion | Viewed: | 214 times | Topic: | Catalog | Status: | Open | |
|
| In protest of 3830c01 being marked for deletion I am not going to sell either
3830 or 3831 on BrickLink.
I sell used bricks, nearly all of these come to me as a complete hinge, in order
to sell them I must either sell them as a pair or manually separate them and
then list them separately.
I still don't understand why they were marked for deletion. There only single
colors in the catalog, no crossed colors, no decorated items. Nothing but plain
single colors.
I will sell them on other well known sites.
Cob
|
|
Author: | iprice | Posted: | May 16, 2019 09:50 | Subject: | Re: Technic battery boxes | Viewed: | 32 times | Topic: | Catalog | |
|
| In Catalog, SezaR writes:
| In Catalog, iprice writes:
| In Catalog, SezaR writes:
| In Catalog, iprice writes:
This
is a set (not an item) consisting of the item
Indeed, 8881-1 is like a service pack. See the second photo.
|
I have compared the photos. To me they appear physically identical; I just wanted
to know if they were in effect the same - whether a "set" (of one item?) or a
component (one item) in a set!
I don't get the whole service pack thing. :/
|
One is the battery box and the other is the bag and its content (its content
is the same battery box) So if you open the bag and take off the battery box,
you will get the item
Not yet clear?
What is the difference between a package including a book (title: how to be happy)
and the book itself?
What is the differenc between
and
?
What is the difference between the train set
and the the "492 parts+2 minifigs+instructions" inside its box?
Bests,
Reza
|
Yeah, sorry I get what you mean. But to me that's not a service pack - that's
just an item within a packet. I'm used to product/software service packs,
that are more like upgrades to the original software, or additions to products
that improve the product and/or performance.
Thanks for the reply BTW.
|
|
Author: | Hygrotus | Posted: | May 15, 2019 06:39 | Subject: | Re: Does part 6057 (Short Rigging) need a variant | Viewed: | 39 times | Topic: | Catalog | |
|
| In Catalog, 1974 writes:
| Same thing with the large brown riggings
In Catalog, TorontoLego writes:
| The four black ones and one brown one are about a plates width shorter. I can't
be the first one to notice this!
|
|
This one has a note from some time (I think it is a quite old note) and it is
on this list here
https://www.bricklink.com/help.asp?helpID=2488
So for now the only thing which can be done here is do the same for this one
and also I will add it to the list.
As for now splitting old parts mold variants is on hold and as you can see this
list of mold variants not distinguished in the catalog is quite a long.
|
|
Author: | SezaR | Posted: | May 15, 2019 02:06 | Subject: | Re: Technic battery boxes | Viewed: | 35 times | Topic: | Catalog | |
|
| In Catalog, iprice writes:
| In Catalog, SezaR writes:
| In Catalog, iprice writes:
This
is a set (not an item) consisting of the item
Indeed, 8881-1 is like a service pack. See the second photo.
|
I have compared the photos. To me they appear physically identical; I just wanted
to know if they were in effect the same - whether a "set" (of one item?) or a
component (one item) in a set!
I don't get the whole service pack thing. :/
|
One is the battery box and the other is the bag and its content (its content
is the same battery box) So if you open the bag and take off the battery box,
you will get the item
Not yet clear?
What is the difference between a package including a book (title: how to be happy)
and the book itself?
What is the differenc between
and
?
What is the difference between the train set
and the the "492 parts+2 minifigs+instructions" inside its box?
Bests,
Reza
|
|
Author: | iprice | Posted: | May 15, 2019 00:37 | Subject: | Re: Technic battery boxes | Viewed: | 30 times | Topic: | Catalog | |
|
| In Catalog, SezaR writes:
| In Catalog, iprice writes:
This
is a set (not an item) consisting of the item
Indeed, 8881-1 is like a service pack. See the second photo.
|
I have compared the photos. To me they appear physically identical; I just wanted
to know if they were in effect the same - whether a "set" (of one item?) or a
component (one item) in a set!
I don't get the whole service pack thing. :/
|
|
Author: | SezaR | Posted: | May 14, 2019 23:54 | Subject: | Re: Technic battery boxes | Viewed: | 36 times | Topic: | Catalog | |
|
| In Catalog, iprice writes:
This
is a set (not an item) consisting of the item
Indeed, 8881-1 is like a service pack. See the second photo.
|
|
|
Author: | 1974 | Posted: | May 14, 2019 13:37 | Subject: | Re: Does part 6057 (Short Rigging) need a variant | Viewed: | 35 times | Topic: | Catalog | |
|
| Same thing with the large brown riggings
In Catalog, TorontoLego writes:
| The four black ones and one brown one are about a plates width shorter. I can't
be the first one to notice this!
|
|
|
Author: | SylvainLS | Posted: | May 13, 2019 14:12 | Subject: | Re: Does part 6057 (Short Rigging) need a variant | Viewed: | 43 times | Topic: | Catalog | |
|
| In Catalog, TorontoLego writes:
| I don't know.
Do you have black ones and brown ones? Can you check to see if this holds true
for at least all the black ones?
|
Nope. I have none. Dark Ages.
If the sets that use them are using them differently, — that is, if they aren’t
substitutable —, the variant would really be necessary. It wouldn’t be the first
time TLG thought better about making a part “in System,” like
or
I wanted to look at the building instructions to look for a mathematical necessity
for the change, but there are some 14 sets that use them, so knowing from which
sets they came from would have narrowed the search.
On the other hand, another possibility simply is that some are not LEGO
|
|
Author: | TorontoLego | Posted: | May 13, 2019 13:38 | Subject: | Re: Does part 6057 (Short Rigging) need a variant | Viewed: | 42 times | Topic: | Catalog | |
|
| I don't know.
Do you have black ones and brown ones? Can you check to see if this holds true
for at least all the black ones?
In Catalog, SylvainLS writes:
|
In Catalog, TorontoLego writes:
| The four black ones and one brown one are about a plates width shorter. I can't
be the first one to notice this!
|
Do you know which sets they come from?
It would be interesting to check if something changed in their uses, mathematically
speaking.
|
|
|
Author: | Agcomptech | Posted: | May 13, 2019 12:44 | Subject: | Re: Please approve LEGO DC 30623: Shazam! Polybag | Viewed: | 63 times | Topic: | Catalog | |
|
| In Catalog, rapar writes:
| Hello,
Can you please approve LEGO DC Super Heroes: 30623 Shazam Polybag? I have
some in my hands. This polybag can already be purchased in Poland.
If you need more information please let me know.
Thank you!
|
I didn't order this not do I want it.
|
|
|
Author: | axaday | Posted: | May 13, 2019 10:52 | Subject: | Re: Please approve LEGO DC 30623: Shazam! Polybag | Viewed: | 46 times | Topic: | Catalog | |
|
| In Catalog Requests, rapar writes:
| Hello,
Can you please approve LEGO DC Super Heroes: 30623 Shazam Polybag? I have
some in my hands. This polybag can already be purchased in Poland.
If you need more information please let me know.
Thank you!
|
You type very well with polybags in your hands.
I didn't realize this was coming. It means I'm gonna need a Flynn Rider
now too.
|
Author: | rapar | Posted: | May 13, 2019 10:45 | Subject: | Please approve LEGO DC 30623: Shazam! Polybag | Viewed: | 244 times | Topic: | Catalog | Status: | Open | |
|
| Hello,
Can you please approve LEGO DC Super Heroes: 30623 Shazam Polybag? I have
some in my hands. This polybag can already be purchased in Poland.
If you need more information please let me know.
Thank you!
|
|
Author: | SylvainLS | Posted: | May 13, 2019 07:26 | Subject: | Re: Does part 6057 (Short Rigging) need a variant | Viewed: | 48 times | Topic: | Catalog | |
|
|
In Catalog, TorontoLego writes:
| The four black ones and one brown one are about a plates width shorter. I can't
be the first one to notice this!
|
Do you know which sets they come from?
It would be interesting to check if something changed in their uses, mathematically
speaking.
|
Author: | TorontoLego | Posted: | May 13, 2019 04:37 | Subject: | Does part 6057 (Short Rigging) need a variant | Viewed: | 89 times | Topic: | Catalog | Status: | Open | |
|
| The four black ones and one brown one are about a plates width shorter. I can't
be the first one to notice this!
|
|
Author: | joesecc | Posted: | May 12, 2019 19:19 | Subject: | Re: Power functions - Hub | Viewed: | 31 times | Topic: | Catalog | |
|
| In Catalog, randyf writes:
| In Catalog, joesecc writes:
| Hi,
What are the differences between the Power function Hubs: 88009 and bb892c01?
Externally they look the same.
|
None. It is just the classification system used on BrickLink.
is a set sold by LEGO containing one part
[p=bb892c01]
Cheers,
Randy
|
Thanks. That clears things up as to why there there are two entries for the same
item.
|
|
Author: | randyf | Posted: | May 12, 2019 11:40 | Subject: | Re: Power functions - Hub | Viewed: | 31 times | Topic: | Catalog | |
|
| In Catalog, joesecc writes:
| Hi,
What are the differences between the Power function Hubs: 88009 and bb892c01?
Externally they look the same.
|
None. It is just the classification system used on BrickLink.
is a set sold by LEGO containing one part
[p=bb892c01]
Cheers,
Randy
|
|
Author: | joesecc | Posted: | May 12, 2019 08:12 | Subject: | Power functions - Hub | Viewed: | 82 times | Topic: | Catalog | Status: | Open | |
|
| Hi,
What are the differences between the Power function Hubs: 88009 and bb892c01?
Externally they look the same.
|
|
Author: | DeLuca | Posted: | May 11, 2019 19:21 | Subject: | Re: Iron Man Mark 43 Issue | Viewed: | 37 times | Topic: | Catalog | |
|
| In Catalog, axaday writes:
| came out last year, retroactively an Age of Ultron set. It is very similar to sh167. There is a slight deco change to the legs that reflects nothing on Mark 33. There is a larger change to the upper torso with a large gray panels with silver cables.
|
Looking at the suits side-by-side, (sh498) is definitely the Mark 43. Since the
"cables" are in the same places that plates are, on (sh167), they likely represent
the skeletal inner layer of the suit, visible before the outer pieces are added.
It is an odd design choice, however, as the Mark 43 is never shown in
such a state.
|
|
|
Author: | avyz66 | Posted: | May 11, 2019 08:54 | Subject: | Re: Star Wars MiniFigs | Viewed: | 30 times | Topic: | Catalog | |
|
| In Catalog, grimsbricksuk writes:
| I can issue you with an excel file which details all star wars minifigs & sets,
including variants and also average guide prices.
Please send me a message with your email & I’ll forward it over to you.
Thanks Graeme.
In Catalog, avyz66 writes:
| Not sure if this is in the correct area to post. I am wanting to start and complete
a Star Wars MiniFig collection. I am looking for a list with variants included
to help me with this. Any push in the right direction is appreciated.
|
|
Just want to thank everyone for the replies and the help. Hope one day I can
return the favor to this community.
|
|
Author: | grimsbricksuk | Posted: | May 11, 2019 03:22 | Subject: | Re: Star Wars MiniFigs | Viewed: | 31 times | Topic: | Catalog | |
|
| I can issue you with an excel file which details all star wars minifigs & sets,
including variants and also average guide prices.
Please send me a message with your email & I’ll forward it over to you.
Thanks Graeme.
In Catalog, avyz66 writes:
| Not sure if this is in the correct area to post. I am wanting to start and complete
a Star Wars MiniFig collection. I am looking for a list with variants included
to help me with this. Any push in the right direction is appreciated.
|
|
|
Author: | sandpitcam | Posted: | May 10, 2019 23:15 | Subject: | Re: Star Wars MiniFigs | Viewed: | 39 times | Topic: | Catalog | |
|
| In Catalog, avyz66 writes:
| Not sure if this is in the correct area to post. I am wanting to start and complete
a Star Wars MiniFig collection. I am looking for a list with variants included
to help me with this. Any push in the right direction is appreciated.
|
My 10 cents is dont. But if you insist, I am about 900 figs into the approx 1090
figs and variants, it has been about 6 or 7 years worth of work and I estimate
5 to 6000 US Dollars so far. I suggest that you break it down into small batches,
and start a want list and go from there.
You will find that being SW attracts a premium, even common figs get expensive,
there are more than a few figs that will cost you $100 plus each up to $400 or
500 for a cloud city Boba fett. Add in some of the Rare older ones and you have
to search the BL catalogue regularly to find the bargains. I guesstimate that
the average per fig is $10 to 15 each - as new.
Good luck and many grey hairs to you on your quest mate.
Regards
Cameron
|
|
Author: | M_R | Posted: | May 10, 2019 16:39 | Subject: | Re: Star Wars MiniFigs | Viewed: | 42 times | Topic: | Catalog | |
|
| In Inventories, avyz66 writes:
| Not sure if this is in the correct area to post. I am wanting to start and complete
a Star Wars MiniFig collection. I am looking for a list with variants included
to help me with this. Any push in the right direction is appreciated.
|
Here´s a list:
https://www.bricklink.com/catalogList.asp?catType=M&catString=65&itemBrand=1000
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|