| Discussion Forum: Thread 237997 |
|
 |
| | | Author: | mjah5  | | Posted: | Jun 27, 2018 00:18 | | Subject: | Inventory Change Request for Minifig cty889 | | Viewed: | 50 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory: [M=cty889]
* Delete 1 Part 973pb3100c01 Blue Torso City Jacket with Diagonal Lower Pockets & Pen over Creased Sweater, Orange Stripes Pattern, Printing on Back / Blue Arms / Yellow Hands
* Add 1 Part 973pb0551c01 Blue Torso City Jacket with Pockets & Pen over Sweater, Orange Stripes Pattern / Blue Arms / Yellow Hands
Comments from Submitter:
Purchase the set 30357 Road Worker Polybag new last weekend. Opened it today. The inventoried Minifig "cty889" does no match the supplied minifig. Specifically the torso differs from the inventory. it lacks printing on the back, the lower pockets are horizontal rather than sloping down toward the hips, has three rather than four buttons sand has matching button holes or snaps on the other side of the jacket, also there is no wrinkles visible on the light blue sweater midway down the torso. Lastly the supplied torso match the image of the minifig on the polybag and the two images of the minifig on the included set instructions. All of this implies that the inventory minifig "cty889" is incorrect.
|
|
|
| | | | | |
| | | | | Author: | StormChaser | | Posted: | Jun 27, 2018 00:45 | | Subject: | Re: Inventory Change Request for Minifig cty889 | | Viewed: | 25 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, mjah5 writes:
| | All of this implies that the inventory minifig "cty889" is incorrect.
|
Minifigure inventories are typically not changed. Instead, they are marked for
deletion and new entries created.
In this case my coworker Marek, an inventories administrator, inventoried the
set and his inventory was confirmed by a very reliable source. Therefore, I
consider it incredibly unlikely to be incorrect. The torso/figure only comes
in this one set, BTW, and Marek's photos are proof that the figure and its
torso exist and came in his set.
The set did definitely also come with the older-style torso as you have discovered,
though:
https://www.youtube.com/watch?v=r_zIves4wYo
Therefore, what will happen in this case is that an alternate minifigure will
be added to the set inventory. Unfortunately your change requests will not be
approved, but we do appreciate your bringing this to our attention.
The particular alternate figure which needs to be added to this set is not in
the catalog. Please add the figure to the catalog or post a photo here so that
the figure may be added. Thank you.
|
|
|
| | | | | | | | | |
| | | | | | | Author: | Hygrotus | | Posted: | Jun 27, 2018 02:40 | | Subject: | Re: Inventory Change Request for Minifig cty889 | | Viewed: | 22 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, StormChaser writes:
| | In Inventories Requests, mjah5 writes:
| | All of this implies that the inventory minifig "cty889" is incorrect.
|
Minifigure inventories are typically not changed. Instead, they are marked for
deletion and new entries created.
In this case my coworker Marek, an inventories administrator, inventoried the
set and his inventory was confirmed by a very reliable source. Therefore, I
consider it incredibly unlikely to be incorrect. The torso/figure only comes
in this one set, BTW, and Marek's photos are proof that the figure and its
torso exist and came in his set.
The set did definitely also come with the older-style torso as you have discovered,
though:
https://www.youtube.com/watch?v=r_zIves4wYo
Therefore, what will happen in this case is that an alternate minifigure will
be added to the set inventory. Unfortunately your change requests will not be
approved, but we do appreciate your bringing this to our attention.
The particular alternate figure which needs to be added to this set is not in
the catalog. Please add the figure to the catalog or post a photo here so that
the figure may be added. Thank you.
|
My two cents to this case as a submiter of this minifig 
Lego evidently updated printig of this torso. New torso has
new part color code 6219626 and yes I found it in polybag set
bought in Europe.
BTW
When you look here https://brickset.com/sets/containing-part-6219626 you will
see also on Lego render photo these changes in printing.
Intersting is that Lego list this toros for four sets, so it loks like will be
exchange of old torso in sets which are in production. Now are three more sets
with possibility to have alternate minifig with new torso print.
Old variant of this torso https://brickset.com/sets/containing-part-4548877
The most interesting is this case is https://brickset.com/sets/30353-1/Tractor
when looking into official LEGO inventory of this you can see both torosos listed
 I think this is the first case when I see in LEGO replacement parts service
both variant together in the same set. Usually after variant change LEGO lists
also for older sets with this part newer variant there.
|
|
|
| | | | | | | | | | | | | |
| | | | | | | | | Author: | paulvdb | | Posted: | Jun 27, 2018 09:57 | | Subject: | Re: Inventory Change Request for Minifig cty889 | | Viewed: | 19 times | | Topic: | Inventories Requests | |
|
| | | My two cents to this case as a submiter of this minifig
Lego evidently updated printig of this torso. New torso has
new part color code 6219626 and yes I found it in polybag set
bought in Europe.
BTW
When you look here https://brickset.com/sets/containing-part-6219626 you will
see also on Lego render photo these changes in printing.
Intersting is that Lego list this toros for four sets, so it loks like will be
exchange of old torso in sets which are in production. Now are three more sets
with possibility to have alternate minifig with new torso print.
Old variant of this torso https://brickset.com/sets/containing-part-4548877
|
Looks like I should have paid more attention to the details when I verified the
inventory for this set. I had not noticed the small difference in the torso print.
My set has this torso.
| | The most interesting is this case is https://brickset.com/sets/30353-1/Tractor
when looking into official LEGO inventory of this you can see both torosos listed
I think this is the first case when I see in LEGO replacement parts service
both variant together in the same set. Usually after variant change LEGO lists
also for older sets with this part newer variant there.
|
|
|
|
| | | | | | | | | | | | | | | | | |
| | | | | | | | | | | Author: | Hygrotus | | Posted: | Jun 27, 2018 11:04 | | Subject: | Re: Inventory Change Request for Minifig cty889 | | Viewed: | 16 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, paulvdb writes:
| | | | My two cents to this case as a submiter of this minifig
Lego evidently updated printig of this torso. New torso has
new part color code 6219626 and yes I found it in polybag set
bought in Europe.
BTW
When you look here https://brickset.com/sets/containing-part-6219626 you will
see also on Lego render photo these changes in printing.
Intersting is that Lego list this toros for four sets, so it loks like will be
exchange of old torso in sets which are in production. Now are three more sets
with possibility to have alternate minifig with new torso print.
Old variant of this torso https://brickset.com/sets/containing-part-4548877
|
Looks like I should have paid more attention to the details when I verified the
inventory for this set. I had not noticed the small difference in the torso print.
My set has this torso.
|
So am I the only one who notice and found updated print of this torso?
Difference is not so small old one doesn't have back printing, new one has,
beside other differences.
|
|
|
| | | | | | | | | |
| | | | | | | Author: | mjah5 | | Posted: | Jun 27, 2018 09:21 | | Subject: | Re: Inventory Change Request for Minifig cty889 | | Viewed: | 20 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, StormChaser writes:
| | In Inventories Requests, mjah5 writes:
| | All of this implies that the inventory minifig "cty889" is incorrect.
|
Minifigure inventories are typically not changed. Instead, they are marked for
deletion and new entries created.
In this case my coworker Marek, an inventories administrator, inventoried the
set and his inventory was confirmed by a very reliable source. Therefore, I
consider it incredibly unlikely to be incorrect. The torso/figure only comes
in this one set, BTW, and Marek's photos are proof that the figure and its
torso exist and came in his set.
The set did definitely also come with the older-style torso as you have discovered,
though:
https://www.youtube.com/watch?v=r_zIves4wYo
Therefore, what will happen in this case is that an alternate minifigure will
be added to the set inventory. Unfortunately your change requests will not be
approved, but we do appreciate your bringing this to our attention.
The particular alternate figure which needs to be added to this set is not in
the catalog. Please add the figure to the catalog or post a photo here so that
the figure may be added. Thank you.
|
Here is the requested photo of the included minifig and one of the set set.
|
|
|
|
|
|
|
|
Canada, Ontario
USA, Oklahoma
Poland, w. Wielkopolskie
Netherlands, Overijssel
)
)