Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | Brick.Door | Posted: | Oct 9, 2021 14:44 | Subject: | Order notice - are there any settings? | Viewed: | 90 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| Is there anywhere to change the settings for the notice sellers receive when
an order is placed in their store?
I don't need an email for every order placed. I check Bricklink every day
for new orders to pack and ship. Having dozens of emails in my inbox just to
tell me an order was placed is not helpful - it increases the chance of missing
an actual communication.
Also, is there a way to send a different notice when an order is placed that
doesn't use instant check out? Because in that case I do want to see it immediately
to calculate shipping and send the invoice.
|
|
Author: | Brick.Door | Posted: | Oct 9, 2021 09:14 | Subject: | Inventory Change Request for Set 20203-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Black {4617 Propeller 3 Blade 5.5 Diameter to 92842 Propeller 3 Blade 5 Diameter}
Comments from Submitter:
Source: sealed bag, also the parts list at the back of the instructions manual shows 4599984 which is 92842
|
|
Author: | Brick.Door | Posted: | Feb 7, 2020 10:39 | Subject: | 30374 Bar 1x4 Frosted Variant | Viewed: | 84 times | Topic: | Catalog | Status: | Open | |
|
| Found some frosted trans-light-blue 1x4 bars in a set recently and I'm not
comfortable mixing them with my current inventory. They are quite different and
I don't think a customer who orders several would be happy getting a mixture.
The additional notes state:
"Alternate item number 28697 is used for transparent colors. This mold variant
has no bubbles and number 28697 molded on it. It has been found in two variations
clear and frosted as showed on additional images."
So it seems the catalog admins are aware of the difference and have decided not
to reflect it in the catalog here? Personally I think this is a mold variation
worth recognizing.
|
|
Author: | Brick.Door | Posted: | Feb 12, 2019 12:46 | Subject: | Allow AFOLs to "Bricklink" the ADP sets | Viewed: | 194 times | Topic: | Catalog | Status: | Open | |
|
| There are no plans to do so, but I hope that once the regular sales period is
finished Bricklink allows the inventory of these sets to be added to the catalog
so people can add them to a want list and buy the parts they need to build them.
Since they use mostly common parts, I think many AFOLs would prefer to build
them with the parts in their own collection, and just buy any ones they are missing.
Not only would this generate revenue for Bricklink by increased sales, it would
be an olive branch to the sellers who have been completely excluded from this
promotion.
Bricklink has done so much to build the AFOL community and it has become a verb
within our vocabulary (much like Google has in the general population). It would
be a sad irony if the sets created by Bricklink to celebrate AFOLs cannot be
Bricklinked by AFOLs.
|
|
Author: | Brick.Door | Posted: | Jan 7, 2019 20:45 | Subject: | Inventory Change Request for Minifig sp007new | Viewed: | 30 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Yellow {973p90c04 Torso Space Classic Moon Pattern / Yellow Arms / Yellow Hands to 973p90new2c10 Torso Space Classic Moon Logo High on Torso Pattern, Inside with Ribs (second reissue) / Yellow Arms / Yellow Hands}
|
|
Author: | Brick.Door | Posted: | Aug 19, 2018 23:32 | Subject: | Inventory Change Request for Minifig sp059 | Viewed: | 41 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 2 Part 4589 Trans-Yellow Cone 1 x 1 without Top Groove
Comments from Submitter:
These cones are already included in the set inventory and should not be duplicated on the minifig. There are only 2 trans-yellow cones included in the box.
|
|
Author: | Brick.Door | Posted: | Jun 1, 2018 13:56 | Subject: | Inventory Change Request for Minifig sp004new2 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Blue {973p90c01 Torso Space Classic Moon Pattern / Blue Arms / Blue Hands to 973p90new2c07 Torso Space Classic Moon Logo High on Torso Pattern, Inside with Ribs (second reissue) / Blue Arms / Blue Hands}
Comments from Submitter:
reissue minifig should have reissue torso assembly
|
|
Author: | Brick.Door | Posted: | Jun 1, 2018 13:54 | Subject: | Inventory Change Request for Minifig sp004new | Viewed: | 33 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Blue {973p90c01 Torso Space Classic Moon Pattern / Blue Arms / Blue Hands to 973p90new2c07 Torso Space Classic Moon Logo High on Torso Pattern, Inside with Ribs (second reissue) / Blue Arms / Blue Hands}
Comments from Submitter:
reissue minifig should have reissue torso assembly
|
|
Author: | Brick.Door | Posted: | May 8, 2018 20:27 | Subject: | Inventory Change Request for Set 7751-1 | Viewed: | 45 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 3068bpb0811L Dark Blue Tile 2 x 2 with Two White Triangles on Dark Blue Background Pattern Model Left Side (Sticker) - Set 7751 (Counterpart)
* Change {1 to 2} Part Dark Blue 3068bpb0811R Tile 2 x 2 with Two White Triangles on Dark Blue Background Pattern Model Right Side (Sticker) - Set 7751 (Counterpart)
Comments from Submitter:
Confirmed with instructions and photo of sticker sheet - both tiles are the same for this set. Delete part 3068bpb0811L from the set it does not exist - the photo for the catalog was digitally altered.
|
|
Author: | Brick.Door | Posted: | Apr 1, 2018 11:21 | Subject: | Inventory Change Request for Set 75020-1 | Viewed: | 27 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change {4 to 3} Part Blue 43093 Technic, Axle Pin with Friction Ridges Lengthwise
Comments from Submitter:
Inventory list from the instructions shows 4 of this part. One is included in the Jabba minifig assembly so the regular inventory should be 3.
|
|
Author: | Brick.Door | Posted: | Mar 20, 2018 10:03 | Subject: | Inventory Change Request for Set 10179-1 | Viewed: | 65 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3069bpb620 Light Bluish Gray Tile 1 x 2 with Silver Controls and Blue and Red Dots Pattern (Sticker) - Set 10179 (Counterpart)
|
|
Author: | Brick.Door | Posted: | Mar 19, 2018 14:39 | Subject: | Bricklink: please clean up incomplete sets | Viewed: | 194 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| I recently listed another batch of used sets. Once again in reviewing prices
I found in most cases the cheapest one available for sale is listed as "complete"
but missing minifigures.
Bricklink can't you do a sweep of these errant listings and send the seller
a warning? Maybe query sets that are listed as complete but have the word "missing"
or "no minifigs" in the comments
I know you don't want to make changes automatically (the seller could have
written "no missing minifigures" or something) but it is a long and slow process
to find these one by one. And there are thousands of them listed.
Sounds like a lot of work? You are probably losing money too. The average
sold price is lower than it should be because so many incomplete sets are being
sold as complete. If sellers saw the real average price they would set their
prices higher and Bricklink would benefit from the higher commission.
For example I recently listed Star Wars set. The cheapest 3 currently available
(listed as complete) are $15, $20 and $24. None of them are complete according
to the sellers description.
The average sold for this set is $22 but since 3 of the sold sets were prices
$15, $15 and $21 they were probably incomplete but sold as complete and now are
polluting the price guide. The correct average sold is about $27
|
|
Author: | Brick.Door | Posted: | Mar 16, 2018 14:19 | Subject: | Stop counting neutral feedback as negative | Viewed: | 200 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| Since the change was made to put the large "% Praise" at the top of each store
front page neutral and negative feedback are basically the same thing.
This is not obvious to customers leaving feedback - especially new members.
I suggest to exclude neutral transactions from the % Praise calculation - treat
them the same as if no feedback had been left. This seems more accurate than
counting them as negative.
Also I find it strange that the % praise is calculated to 2 decimal places. Does
anyone really think a 99.74 seller is more trustworthy than 99.68? There are
no standards or guidelines for what makes a positive/neutral/negative transaction
-- it is up to the individual opinion. So there is no way this figure is
that accurate.
|
|
Author: | Brick.Door | Posted: | Dec 12, 2017 11:47 | Subject: | So many "incomplete" sets listed wrong | Viewed: | 165 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| I'm looking through the active listings for used Star Wars sets to price
some items I am adding to my inventory. Every single one I found someone listing
the set as "complete" but in the comments describing the pieces or minifigs that
are missing.
The price guide is really valuable here, as is creating a quality shopping experience
for customers (many of which are brand new to Bricklink).
Sometimes I will send a note to the store owner and ask them to correct, although
it is a lot of work to do it every time and I certainly am not going to follow
up.
I would suggest that BL scan through the comments on used set listings and look
for ones listed as complete with the word "missing" in the comments. Then send
an robo-email to the store owner and bring it to their attention.
... also I think check boxes when adding sets to inventory for "instructions"
"box" "stickers" "minifigures" would be useful but that would take actual programming
and I doubt there are resources for that.
|
|
Author: | Brick.Door | Posted: | Oct 30, 2017 09:23 | Subject: | Email notice - manual invoice required | Viewed: | 123 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| With instant checkout most of the orders I receive are paid before I am even
aware of them, although I still get a confirmation email from both Bricklink
and Paypal.
I would be useful for Bricklink to have an option to only send the email notification
if there is an order that requires a manual invoice (or requesting a quote obviously).
That way I know there is something I need to do. Otherwise it might be several
hours before I check the orders page and realize an invoice needs to be sent.
|
|
Author: | Brick.Door | Posted: | Oct 23, 2017 17:05 | Subject: | Use actual email for "contact me" | Viewed: | 80 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| Is it possible to have emails sent from the actual address when someone contacts
me through the Bricklink site? Rather than having them generated from blservice@bricklink.com.
When I hit reply, the response goes back to Bricklink instead of to the email
author.
Either that or have it sent to a dead email address so at least I will get an
error that it wasn't delivered.
This has probably been suggested before.
|
|
Author: | Brick.Door | Posted: | May 16, 2017 11:31 | Subject: | Add variant field | Viewed: | 97 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| I don't know if changes to the Bricklink database are even possible, but
I think this would really benefit Bricklink and their vision for the stud.io.
Part variants was one of the problems with sourcing parts for the MOC shop, and
it will be again for stud.io. Users who create a model and want to order the
pieces don't have any efficient way to look for different suitable variants
of a part. It can make a big difference for price and availability.
I suggest that a new "variant" field be added for catalog parts, wanted lists
and store inventory. This would be an attribute similar to the color. It could
be left n/a if the variation hasn't been identified or isn't important.
Or it could be selected a, b, c etc. to specify a particular one.
Unlike the color, variant "a" would have a different meaning for each part. This
would be captured in the part description and pictures.
|
|
Author: | Brick.Door | Posted: | Sep 29, 2015 12:44 | Subject: | Inventory Change Request for Set 75099-1 | Viewed: | 28 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 61976 Reddish Brown Minifig, Utensil Bag Messenger Pouch
Comments from Submitter:
Should be inventoried with minifigure - remove from set inventory.
|
|
Author: | Brick.Door | Posted: | Sep 29, 2015 12:42 | Subject: | Inventory Change Request for Minifig sw677 | Viewed: | 58 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory: [M=sw677]
* Add 1 Part 61976 Reddish Brown Minifig, Utensil Bag Messenger Pouch
Comments from Submitter:
Shown in instructions wearing the bag - it should be included in the minifig inventory.
|
|
Author: | Brick.Door | Posted: | Jun 1, 2015 08:10 | Subject: | Inventory Change Request for Set 21118-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 106 Part 3794b Reddish Brown Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) (Alternate) (match ID 1)
* Change 106 Part Reddish Brown 15573 Plate, Modified 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) {match ID 0 to 1}
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|