Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | WilliamRaine | Posted: | Jun 7, 2021 20:54 | Subject: | Parts with string attached as counterparts? | Viewed: | 78 times | Topic: | Catalog | Status: | Open | |
|
| Is there a sort of limit on how these should be listed? The medium and thick
string is easy enough to untie from my experience, but when it comes to the thin
string
I have found it nearly impossible to untie this string from parts without damaging
the string.
So the question is what parts would be considered an acceptable counterpart?
There are some assemblies I imagine may not be counted as so, such as the drawbridge
string in Black Monarch's Castle (The string is tied to two pieces with various
pieces caught up in the middle) and the hook string in a few of the vintage pirate
ships (this is often strung through one of the mast segments)
I have noticed a few parts that have counterparts listed already, such as these
pieces:
One part that I think should be listed as a stringed counterpart would be this
one:
|
|
Author: | WilliamRaine | Posted: | Jun 7, 2021 04:23 | Subject: | Inventory Change Request for Set 1737-1 | Viewed: | 27 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change {7 to 8} Part Black 3022 Plate 2 x 2
Comments from Submitter:
Unless I'm missing something, this set shares the same instruction booklet as set
and they both include x8 of these.
|
|
Author: | WilliamRaine | Posted: | Jun 3, 2021 13:16 | Subject: | Re: Inventory Change Request for Set 6559-1 | Viewed: | 20 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Turez writes:
| In Inventories Requests, WilliamRaine writes:
| Please make changes to the following inventory:
* Delete 1 Part x77a Black String, Cord Thin (Undetermined Length Type)
* Add 1 Part x77ac20 Black String, Cord Thin 20cm
* Add 1 Part x77ac75 Black String, Cord Thin 75cm
Comments from Submitter:
https://brickshelf.com/cgi-bin/gallery.cgi?i=2128927
http://www.peeron.com/inv/sets/6559-1
There are two strings that come with this set, a shorter string for the fishing pole and a longer one for the crane. Judging from the information in the above two links I believe these two lengths are correct for this set, however I do not own it new and have no further evidence of the length of the actual length of the two strings. If anyone owns this set new and could confirm, it would be appreciated.
|
I actually have the set () but I got it when I was 4 or 5 years old and played
a lot with it at that time so I cannot guarantee that my parts are still original.
The short string has been replaced many years ago but I just checked the long
string as that seems to be original and it has a lengh of about 77cm.
|
Awesome! Thank for your help, I appreciate it. I received the set used recently
and both the fishing pole and the crane winch are missing, so here I am figuring
out the lengths hehe. I will get it back 100%
I always wanted some of these diver sets when I was a kid, the one I had was
Shark Attack with the 3 sharks
|
|
Author: | WilliamRaine | Posted: | Jun 3, 2021 12:38 | Subject: | Inventory Change Request for Set 6559-1 | Viewed: | 34 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part x77a Black String, Cord Thin (Undetermined Length Type)
* Add 1 Part x77ac20 Black String, Cord Thin 20cm
* Add 1 Part x77ac75 Black String, Cord Thin 75cm
Comments from Submitter:
https://brickshelf.com/cgi-bin/gallery.cgi?i=2128927
http://www.peeron.com/inv/sets/6559-1
There are two strings that come with this set, a shorter string for the fishing pole and a longer one for the crane. Judging from the information in the above two links I believe these two lengths are correct for this set, however I do not own it new and have no further evidence of the length of the actual length of the two strings. If anyone owns this set new and could confirm, it would be appreciated.
|
|
Author: | WilliamRaine | Posted: | Jun 3, 2021 12:32 | Subject: | Re: Inventory Change Request for Set 6559-1 | Viewed: | 19 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Turez writes:
| In Inventories Requests, WilliamRaine writes:
| Please make changes to the following inventory:
* Delete 1 Part x77a Black String, Cord Thin (Undetermined Length Type)
* Add 1 Part x77ac25 Black String, Cord Thin 25cm
* Add 1 Part x77ac100 Black String, Cord Thin 100cm
Comments from Submitter:
https://brickshelf.com/cgi-bin/gallery.cgi?i=2128927
http://www.peeron.com/inv/sets/6559-1
There are two strings that come with this set, a shorter string for the fishing pole and a longer one for the crane. Judging from the information in the above two links I believe these two lengths are correct for this set, however I do not own it new and have no further evidence of the length of the actual length of the two strings. If anyone owns this set new and could confirm, it would be appreciated.
|
Those lenghs on peeron are in studs, not in cm.
The short string is shown in the instructions with a lengh of 20cm.
The long string is most likely
as this part has already been confirmed in several other Divers sets.
|
Oh no! My mistake, I will delete this request and submit a new one. Thank you
for pointing that out.
|
|
Author: | WilliamRaine | Posted: | Jun 3, 2021 06:10 | Subject: | Re: Black String, Cord Thin length in sets | Viewed: | 25 times | Topic: | Catalog | |
|
| In Catalog, Turez writes:
| In Catalog, WilliamRaine writes:
| In Catalog, cycbuild writes:
| In Catalog, WilliamRaine writes:
Cut down to approx. 15cm and 85cm lengths (fishing rod + crane)
Smallest length available for anchor line.
| Does anyone know how long the string is that comes in these sets? If anyone does
that would be very helpful, thank you.
|
Recommend a longer line and trimming it to size(s). 200cm is currently cheaper
on BrickLink than the 150cm and 122cm lengths. Cheers
|
Thank you for the reply I really appreciate it! I will probably get the 200cm
for these 2 sets, thanks for mentioning it.
|
Set 6559 should have two strings (not one that needs to be cut).
See unboxing here:
https://brickshelf.com/cgi-bin/gallery.cgi?i=2128927
(and following images)
Peeron has lenghs for them: http://www.peeron.com/inv/sets/6559-1
|
Thanks for this! I'm going to submit a request to add these strings in the
approximate length listed on peeron. Maybe someday it can be confirmed by someone
who owns it new
|
|
Author: | WilliamRaine | Posted: | Jun 3, 2021 04:31 | Subject: | Re: Black String, Cord Thin length in sets | Viewed: | 43 times | Topic: | Catalog | |
|
| In Catalog, cycbuild writes:
| In Catalog, WilliamRaine writes:
Cut down to approx. 15cm and 85cm lengths (fishing rod + crane)
Smallest length available for anchor line.
| Does anyone know how long the string is that comes in these sets? If anyone does
that would be very helpful, thank you.
|
Recommend a longer line and trimming it to size(s). 200cm is currently cheaper
on BrickLink than the 150cm and 122cm lengths. Cheers
|
Thank you for the reply I really appreciate it! I will probably get the 200cm
for these 2 sets, thanks for mentioning it.
|
|
Author: | WilliamRaine | Posted: | May 30, 2021 14:52 | Subject: | Black String, Cord Thin length in sets | Viewed: | 101 times | Topic: | Catalog | Status: | Open | |
|
|
Does anyone know how long the string is that comes in these sets? If anyone does
that would be very helpful, thank you.
|
|
Author: | WilliamRaine | Posted: | May 29, 2021 19:39 | Subject: | Re: Removing glue from parts? | Viewed: | 41 times | Topic: | LEGO products | |
|
| In LEGO, WilliamRaine writes:
| I recently got a Flying Time Vessel in a lot, and it is all glued together! The
glue does seem particularly strong, as much of the set has come apart on its
own and I see no broken pieces, it's also possible to scrape and pull off
bits of glue from some of the pieces.
I was thinking of trying hot water or alcohol, but thought I would first ask
here if anyone has any sure fire methods for getting glue off of parts.
|
Well.....seems only -some- of the parts used that mild adhesive, a lot of the
ship is actually glued with something far more hardcore. I had to throw it out
I did manage to salvage a few parts out of it though, mostly the technic pieces
and dragon arms from the front and such. At least it wasn't a more valuable
set!
|
|
Author: | WilliamRaine | Posted: | May 29, 2021 11:42 | Subject: | Re: Removing glue from parts? | Viewed: | 29 times | Topic: | LEGO products | |
|
| In LEGO, WilliamRaine writes:
| I recently got a Flying Time Vessel in a lot, and it is all glued together! The
glue does seem particularly strong, as much of the set has come apart on its
own and I see no broken pieces, it's also possible to scrape and pull off
bits of glue from some of the pieces.
I was thinking of trying hot water or alcohol, but thought I would first ask
here if anyone has any sure fire methods for getting glue off of parts.
|
Thanks for all the tips I'll try cleaning it up soon with hot water first!
|
|
Author: | WilliamRaine | Posted: | May 28, 2021 17:00 | Subject: | Removing glue from parts? | Viewed: | 106 times | Topic: | LEGO products | |
|
| I recently got a Flying Time Vessel in a lot, and it is all glued together! The
glue does seem particularly strong, as much of the set has come apart on its
own and I see no broken pieces, it's also possible to scrape and pull off
bits of glue from some of the pieces.
I was thinking of trying hot water or alcohol, but thought I would first ask
here if anyone has any sure fire methods for getting glue off of parts.
|
Author: | WilliamRaine | Posted: | May 25, 2021 20:51 | Subject: | Re: (Cancelled) | Viewed: | 25 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, WilliamRaine writes:
Nevermind I should have checked the change log first.
|
|
Author: | WilliamRaine | Posted: | May 25, 2021 09:17 | Subject: | Re: NEW Utensil Briefcase / Suitcase broken | Viewed: | 35 times | Topic: | Selling | |
|
| In Selling, legobasar writes:
| I just checked my NEW Sets Zombie Businessman, Series 14 col14-13:
https://www.bricklink.com/v2/catalog/catalogitem.page?S=col14-13
I noticed, that all Utensil Briefcase / Suitcase are folded, but they are broken
in 2 parts when unfolded, although they were sorted out from new sealed sets!
Anyone else who noticed this?
|
Not with that specific set, but I have noticed this suitcase part splits into
two pieces very easily, I have a bunch of them that are in two pieces, far more
than the ones that are still connected. I think most of my split in half ones
are black though.
|
|
Author: | WilliamRaine | Posted: | May 23, 2021 20:03 | Subject: | 5972 Space Truck Getaway missing part | Viewed: | 63 times | Topic: | Wanted | |
|
|
* | | 61800pb07R Bionicle Wing Small / Tail with Axle Hole with Red and Black Striped Panel and Scratched Panel with Gray Holes Pattern Model Right Side (Stickers) - Set 5972 Parts: BIONICLE |
Concerning this piece, the left side stickered variant is missing from the catalog,
and just happens to be some of the stickers I am missing. I was wondering if
anyone has this and can add it to the catalog, and if anyone has this piece for
sale?
I has two stickers applied to it, there are 5 stickers in all on these bionicle
wings in the set (x1 on the rear right, x2 on front right and x2 on the front
left)
|
|
|
Author: | WilliamRaine | Posted: | May 22, 2021 02:15 | Subject: | Re: Help identifying torso part 2 | Viewed: | 15 times | Topic: | Catalog Identification | |
|
| In Catalog Identification, sellij writes:
| Hi all, I would once again like to appeal to your knowledge.
I'm down to my last 8 torso's, but I can't find these on bricklink
or via google.
The first picture, blue and brown, I suspect this could be Star Wars?
2nd picture perhaps a knight? And?
3rd picture a butler? And?
4th picture No clue of either.....
Thanks again!
|
I know these two anyway, fright knights and UFO:
|
|
Author: | WilliamRaine | Posted: | May 17, 2021 19:37 | Subject: | Re: Random expensive parts list | Viewed: | 38 times | Topic: | Off Topic | |
|
| In Off Topic, MrPetovan writes:
| Replace the curly braces by square braces if you want to use the macro tags!
In Off Topic, WilliamRaine writes:
| {p=30033,5}
Man it's unfortunate when you buy a used set and find out a part like this
is missing....
|
|
Realized my mistake too late! Aaaaand can't edit my post. I'll remember
next time!
|
Author: | WilliamRaine | Posted: | May 17, 2021 18:31 | Subject: | Re: Random expensive parts list | Viewed: | 53 times | Topic: | Off Topic | |
|
| In Off Topic, firestar246 writes:
{p=30033,5}
Man it's unfortunate when you buy a used set and find out a part like this
is missing....
|
|
Author: | WilliamRaine | Posted: | May 16, 2021 19:31 | Subject: | Re: Stop listed after positive feedback? | Viewed: | 68 times | Topic: | General | |
|
| In General, wildchicken13 writes:
| In General, WilliamRaine writes:
| I had a problem order recently (incorrect and missing parts) and the seller gave
me a refund to cover the parts. We both left positive feedback, and now the seller
has stop listed me.
Just seems silly to stop list someone in such a situation. Curious about others
thoughts, I guess?
|
It happens. Sellers can stoplist anyone for any reason. Don't take it personally.
Move on and take your business elsewhere
|
I won't, plenty of sellers on the site. It would be more of a bummer if the
website was smaller. Moving on!
|
|
Author: | WilliamRaine | Posted: | May 16, 2021 18:54 | Subject: | Stop listed after positive feedback? | Viewed: | 209 times | Topic: | General | |
|
| I had a problem order recently (incorrect and missing parts) and the seller gave
me a refund to cover the parts. We both left positive feedback, and now the seller
has stop listed me.
Just seems silly to stop list someone in such a situation. Curious about others
thoughts, I guess?
|
Author: | WilliamRaine | Posted: | May 16, 2021 18:12 | Subject: | Cardboard Sleeve 4580964 | Viewed: | 47 times | Topic: | Catalog Requests | For: | Catalog Associate | Status: | Completed | |
|
|
Please add in description this is found in the following set:
Source: Sealed Set Contents
|
Author: | WilliamRaine | Posted: | May 16, 2021 17:42 | Subject: | Cardboard Sleeve 6049739 | Viewed: | 49 times | Topic: | Catalog Requests | For: | Catalog Associate | Status: | Completed | |
|
|
Please add in description this is found in the following set:
Source: Sealed Set Contents
|
Author: | WilliamRaine | Posted: | May 16, 2021 17:39 | Subject: | Cardboard Sleeve 6109702 | Viewed: | 42 times | Topic: | Catalog Requests | For: | Catalog Associate | Status: | Completed | |
|
|
Please add in description this is found in the following set:
Source: Sealed Set Contents
|
|
Author: | WilliamRaine | Posted: | May 12, 2021 13:49 | Subject: | Re: Inventory Change Request for Set 4432-1 | Viewed: | 18 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Fyrkanten writes:
| Please make changes to the following inventory:
* Add 1 Part 4032 Dark Bluish Gray Plate, Round 2 x 2 with Axle Hole
* Add 2 Part 3176 Light Bluish Gray Plate, Modified 3 x 2 with Hole
* Add 1 Part 2654 Light Bluish Gray Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)
* Add 3 Part 3065 Trans-Black Brick 1 x 2 without Bottom Tube
Comments from Submitter:
4032 and 2654 are missing completely in inventory.
3176 and 3065 are listed but with wrong quantity.
I have listed the correct total amount of parts.
/Sara
|
It appears this set was redesigned during production, check the bottom of the
inventory for the parts that were added for the redesign.
|
|
Author: | WilliamRaine | Posted: | May 8, 2021 14:59 | Subject: | Inventory Change Request for Set 8880-1 | Viewed: | 29 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part BA131pb03 Black Stickered Assembly 8 x 2 with LEGO Technic Logo, Yellow Stripe and '4x4x4' Pattern (Sticker) - Set 8880 - 2 Tile 1 x 8 (Counterpart)
Comments from Submitter:
Stickered counterpart
|
|
Author: | WilliamRaine | Posted: | May 7, 2021 17:34 | Subject: | Inventory Change Request for Set 4195-1 | Viewed: | 25 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Minifig poc043 Queen Anne's Revenge Masthead
* Delete 2 Part 59230 White Arm Mechanical, Straight with Clips at 90 degrees (Vertical Grip)
* Delete 1 Part 93060 Trans-Orange Torso Skeleton, Angular Rib Cage, Plain
* Change {17 to 16} Part White 3626bpb0001 Minifigure, Head Skull Standard Pattern - Blocked Open Stud
* Change {17 to 16} Part White 3626cpb0001 Minifigure, Head Skull Standard Pattern - Hollow Stud (Alternate)
* Change {2 to 3} Part White 3626cpb0001 Minifigure, Head Skull Standard Pattern - Hollow Stud (Alternate)
* Change {6 to 4} Part White 30377 Arm Mechanical, Battle Droid
Comments from Submitter:
Changes to reflect the masthead as a figure entry
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|