Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | 1977_mauro | Posted: | Nov 20, 2023 00:06 | Subject: | US $0.01 Fee Amount Due | Viewed: | 95 times | Topic: | Problem | |
|
| Hi all,
I paid my BL fees for the last month but after payment still a balance of US
$0.01 remained.
I paid via PayPal in US $, thus it cannot be a conversion issue.
Now when I try to pay the 1 cent, on the next page it shows 0 cent and I am not
able to do so.
Now the balance turned into red and I will be suspended in the next month.
Who can help out here?
Thanks in advance
Mauro
|
Author: | 1977_mauro | Posted: | Oct 14, 2023 01:49 | Subject: | Do we need a note for this diffetence? | Viewed: | 123 times | Topic: | Catalog | Status: | Open | |
|
| Found in the new Mars Perseverance set.
Mauro
|
|
Author: | 1977_mauro | Posted: | Sep 6, 2023 04:20 | Subject: | Inventory Change Request for Set 76991-1 | Viewed: | 20 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 50945 Black Tire 14mm D. x 6mm Solid Smooth (Extra)
Comments from Submitter:
I have missed this one during inventorizing.
|
|
Author: | 1977_mauro | Posted: | Sep 5, 2023 15:21 | Subject: | Inventory Change Request for Set 10307-1 | Viewed: | 27 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 75c12 Dark Bluish Gray Hose, Rigid 3mm D. 12L / 9.6cm (Extra)
* Add 1 Part 37762 Dark Bluish Gray Minifigure, Utensil Candle (Extra)
* Change {1 to 2} Part Tan 3024 Plate 1 x 1 (Extra)
* Change {1 to 2} Part Dark Bluish Gray 20482 Tile, Round 1 x 1 with Bar and Pin Holder (Extra)
Comments from Submitter:
Even I have checked the extra parts twice, I could still have made an error due to the large amount of parts. Please doublecheck.
|
|
Author: | 1977_mauro | Posted: | Aug 6, 2023 10:15 | Subject: | Inventory Change Request for Part 14518c01pb04 | Viewed: | 31 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory: [P=14518c01pb04]
* Change 1 Part {(Variable Color) to Light Bluish Gray} 14518 Shark Body with Gills
Comments from Submitter:
Currently the color is NOT APPLICABLE but should be LIGHT BLUISH GRAY.
|
Author: | 1977_mauro | Posted: | Jul 27, 2023 15:55 | Subject: | Add alternate part number 62603pb04 to | Viewed: | 46 times | Topic: | Catalog Requests | For: | Catalog Associate | Status: | Completed | |
|
| ...the part
Like for all other shark bodies 62603 is molded on the part.
Thanks Mauro
|
|
Author: | 1977_mauro | Posted: | Jul 22, 2023 00:54 | Subject: | Inventory Change Request for Set 71741-1 | Viewed: | 34 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 2540 White Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends
* Add 1 Part 3839b White Plate, Modified 1 x 2 with Bar Handles - Flat Ends, Low Attachment
Comments from Submitter:
Both parts are used to build the flying scooter in booklet 3 on page 111:
https://www.lego.com/cdn/product-assets/product.bi.core.pdf/6455444.pdf
|
|
Author: | 1977_mauro | Posted: | Jul 18, 2023 00:22 | Subject: | Add alternate mold number 1887... | Viewed: | 50 times | Topic: | Catalog Requests | For: | Catalog Associate | Status: | Completed | |
|
| to the part:
It came in set:
Even there is no mold number visible on the part, there is a difference in the
inner side, see first photo - the new part on the right side has a round ring
deep inside, during the old version has a hexagon shaped ring.
But there are no differences in the outer side, see further photos in which the
new version is on the right side.
Thanks Mauro
|
|
|
Author: | 1977_mauro | Posted: | Jul 12, 2023 06:27 | Subject: | New part 4308 or an alternative for 77182? | Viewed: | 80 times | Topic: | Catalog Requests | For: | Catalog Associate | Status: | Completed | |
|
| Hi,
in set
there is a new variant of part
It has the mold number 4308.
From the pictures I have added it seems that the open side (visible mostly in
the second picture) is a little bit different to the old part.
I don't have any in hand but you can see it here on the left bottom picture:
https://rebrickable.com/parts/77182/slope-curved-10-x-2-x-2-with-curved-end-right/378/
Best regards
Marius
|
|
|
Author: | 1977_mauro | Posted: | Jul 7, 2023 08:34 | Subject: | Additional 2 big parts in 60365-1 | Viewed: | 68 times | Topic: | Inventories | Status: | Open | |
|
| Hi all,
when I was finished with this set:
two parts were left:
and
I checked the building steps twice, no chance that I forgotten them. I checked
the box pictures as well, not found these two parts here as well (By the way,
another one 1 x 4 in medium azure and two 2 x 4 in dark bluish gray are used
in the instruction).
Has someone noticed that as well?
Mauro
|
|
Author: | 1977_mauro | Posted: | Jun 23, 2023 04:13 | Subject: | Alternate number for Minifigure, Hair: 29633? | Viewed: | 104 times | Topic: | Catalog Requests | For: | Catalog Associate | Status: | Completed | |
|
| I have found a new mold number 3075 for this part:
in the new set:
For me it looks the same as the old variant but I haven't this part in hand
to compare.
Thanks Mauro
|
|
|
Author: | 1977_mauro | Posted: | Jun 19, 2023 23:45 | Subject: | Alternate / New catalog entry - Hinge Brick.. | Viewed: | 85 times | Topic: | Catalog Requests | For: | Catalog Associate | Status: | Completed | |
|
| Hi,
I have found a new mold number 49995 for:
* | | 18455 Hinge Brick 2 x 4 Locking with 1 Finger on Top at One End Parts: Hinge |
in set
The part with the new mold number has a stud holder on the bottom, see attached
pictures.
Unfortunately I don't have the old part for comparison reason.
Can someone check, how the old version looks at the bottom?
Thanks
Mauro
|
|
|
Author: | 1977_mauro | Posted: | Jun 13, 2023 12:46 | Subject: | Inventory Change Request for Set 77012-1 | Viewed: | 36 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 1849pb01 Reddish Brown Minifigure, Hair Combo, Hat with Hair, Fedora Outback Style with Wide Brim with Molded Dark Brown Band and Short Hair Pattern (Extra)
Comments from Submitter:
From a sealed set.
|
|
Author: | 1977_mauro | Posted: | Jun 8, 2023 12:31 | Subject: | Inventory Change Request for Set 75331-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 2821pb01 Light Bluish Gray Container, Box 2 x 2 x 1 - Top Opening with Raised Inner Bottom with Dark Bluish Gray SW Imperial Logo and Aurebesh Characters 'CARGO' Pattern (Alternate) (match ID 1)
* Change 2 Part Light Bluish Gray 35700pb05 Container, Box 2 x 2 x 1 - Top Opening with Flat Inner Bottom with Dark Bluish Gray SW Imperial Logo and Aurebesh Characters 'CARGO' Pattern {match ID 0 to 1}
Comments from Submitter:
Parted out 2 sealed sets, one of them has the new variant, the other one the old one.
|
|
Author: | 1977_mauro | Posted: | Jun 8, 2023 07:15 | Subject: | Add the 10317 instruction dimensions | Viewed: | 43 times | Topic: | Catalog Requests | For: | Catalog Associate | Status: | Already Exists | |
|
| x = 27cm
y = 19.1cm
z = 1cm
Thanks
|
|
Author: | 1977_mauro | Posted: | May 24, 2023 10:27 | Subject: | LEGO Land Rover Classic Defender 90 Inventory | Viewed: | 65 times | Topic: | Inventories | Status: | Open | |
|
| Hi,
I am currently inventorizing this set:
I built all three versions including the alternative version and I am struggling
to findthese three pieces which are included in the LEGO part list at the end
of instruction:
In black.
I have found in the instruction that it is 3 times used but there 4 are in the
list.
In black.
I have found in the instruction that it is 2 times used but there 3 are in the
list
I have one left. I could have forgotten one as they are used 20 times, but it
is unlikely.
Can someone check this as well?
It is somehow crazy as all smaller extra parts which are left, are identical
to the list on another LEGO side. I checked the instruction three times for the
first both parts but was not able to find the mistake.
Thanks in advance
Mauro
|
|
Author: | 1977_mauro | Posted: | May 23, 2023 13:48 | Subject: | Add category Creator: Creator Expert to... | Viewed: | 60 times | Topic: | Catalog Requests | For: | Catalog Associate | Status: | Open | |
|
| ...Ghostbusters ECTO-1
The reason is that we have DeLorean put into this category:
As we can see, the ECTO-1 has similar box design and in addition it looks like
a Creator Expert car:
the category should be: Creator: Creator Expert: Ghostbusters
Thanks
Mauro
|
|
Author: | 1977_mauro | Posted: | May 15, 2023 12:23 | Subject: | Add new alternate number for part 4035 | Viewed: | 44 times | Topic: | Catalog Requests | For: | Catalog Associate | Status: | Completed | |
|
| Hi,
For the following part
I found the same part with the mold number 3233 in this set:
You can see in the pictures that the parts are nearly identical (the red one
is 4035, the sand green is 3233).
Please maintain 3233 as an alternate number for this part.
Thanks Mauro
|
|
|
Author: | 1977_mauro | Posted: | May 3, 2023 09:17 | Subject: | Inventory Change Request for Set 71741-1 | Viewed: | 35 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 52494 Dark Bluish Gray Plate, Round 1 x 1 with Binoculars (Robot / Droid Head) (Extra)
|
|
Author: | 1977_mauro | Posted: | May 3, 2023 04:23 | Subject: | Inventory Change Request for Set 71741-1 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 4 Part 44861 Black Plate, Modified 1 x 2 with Open O Clip on Top (Alternate) (match ID 9)
* Change 4 Part Black 92280 Plate, Modified 1 x 2 with Clip with Center Cut on Top {match ID 0 to 9}
Comments from Submitter:
From 2 sealed sets.
|
|
Author: | 1977_mauro | Posted: | Apr 12, 2023 15:39 | Subject: | Inventory Change Request for Set 21322-1 | Viewed: | 32 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Black {6628 Technic, Pin with Friction Ridges and Tow Ball (Undetermined Type) to 6628a Technic, Pin with Friction Ridges and Tow Ball with Round Pin Hole}
Comments from Submitter:
From a sealed set.
|
|
Author: | 1977_mauro | Posted: | Mar 10, 2023 09:34 | Subject: | Inventory Change Request for Set 75574-1 | Viewed: | 33 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 1587pb01c01 Bright Light Blue Direhorse with Blue Crest, Mane, and Tail, and Yellow Eyes Pattern (Counterpart)
|
|
Author: | 1977_mauro | Posted: | Mar 7, 2023 23:20 | Subject: | Inventory Change Request for Set 75337-1 | Viewed: | 31 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 2752 Light Bluish Gray Slope, Inverted 33 3 x 2 with Hollow Round Bottom Tube (Alternate) (match ID 1)
* Change 1 Part Light Bluish Gray 3747b Slope, Inverted 33 3 x 2 with Flat Bottom Pin and Connections between Studs {match ID 0 to 1}
Comments from Submitter:
From a sealed set.
It seems that this alternate slope was already released 2022.
|
|
Author: | 1977_mauro | Posted: | Feb 22, 2023 06:02 | Subject: | Average time for parting out sets | Viewed: | 114 times | Topic: | General | |
|
| Hi,
I have noticed that I need around one hour for 1000 parts taken from the same
sets.
This includes storing them into the corresponding bins, too.
How long do you need?
Mauro
|
Author: | 1977_mauro | Posted: | Jan 26, 2023 07:07 | Subject: | Move the part... | Viewed: | 116 times | Topic: | Catalog Requests | For: | Catalog Associate | Status: | Completed | |
|
|
to category: Road Sign
It does not make sense as we have 4 occurrences in Belville Fairy-Tale sets,
4 in Fabuland and 1 in Harry Potter.
Mauro
|
Author: | 1977_mauro | Posted: | Jan 13, 2023 01:37 | Subject: | Most wanted list per item of one category | Viewed: | 90 times | Topic: | Help | |
|
| Hi all,
is there a chance to get such a list?
For sure, I can have a list of one category like this one:
https://www.bricklink.com/catalogStatsWanted.asp?itemType=P&catID=5
But this list differentiates between the colors of the same item. I would need
to have this list without this differentiation.
Thanks in advance
Mauro
|
|
Author: | 1977_mauro | Posted: | Jan 7, 2023 10:57 | Subject: | Inventory Change Request for Set 76407-1 | Viewed: | 25 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 5 Part 76959 Reddish Brown Slope, Inverted 45 2 x 2 with Hollow Round Bottom Tube (Alternate) (match ID 2)
* Change 5 Part Reddish Brown 3660 Slope, Inverted 45 2 x 2 with Flat Bottom Pin {match ID 0 to 2}
Comments from Submitter:
From a sealed set.
|
|
Author: | 1977_mauro | Posted: | Dec 1, 2022 04:06 | Subject: | Part out extra parts only | Viewed: | 85 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| Hi BL team,
I am building a lot of sets from my private collection.
The extra parts I am always putting into my shop.
It is annoying to do that manually. There should be an option to part out extra
parts only.
Thanks
Mauro
|
|
Author: | 1977_mauro | Posted: | Oct 27, 2022 12:21 | Subject: | Inventory Change Request for Set 60307-1 | Viewed: | 25 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 66897 Light Bluish Gray Plate, Modified 1 x 2 with Wheel Holder, Reinforced Underside (Alternate) (match ID 1)
* Add 2 Part 40687 Reddish Brown Plate, Modified 2 x 4 with Pins and Thick Reinforced Supports (Alternate) (match ID 2)
* Change 1 Part Light Bluish Gray 21445 Plate, Modified 1 x 2 with Wheel Holder {match ID 0 to 1}
* Change 2 Part Reddish Brown 30157 Plate, Modified 2 x 4 with Pins and Thin Angled Supports {match ID 0 to 2}
Comments from Submitter:
Parted out 3 sealed sets. All 3 has the newer variants included.
|
|
Author: | 1977_mauro | Posted: | Sep 26, 2022 05:57 | Subject: | Inventory Change Request for Set 71043-1 | Viewed: | 39 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 3957b Trans-Clear Antenna 4H - Flat Top (Alternate) (match ID 2)
Comments from Submitter:
There is no regular part with match ID 2.
|
Author: | 1977_mauro | Posted: | Sep 21, 2022 06:30 | Subject: | Inventory Change Request for Set 79008-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 8 Part Black {6628 Technic, Pin with Friction Ridges and Tow Ball (Undetermined Type) to 6628a Technic, Pin with Friction Ridges and Tow Ball with Round Pin Hole}
|
|
Author: | 1977_mauro | Posted: | Sep 21, 2022 05:34 | Subject: | Inventory Change Request for Set 79008-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 4497 Pearl Dark Gray Minifigure, Weapon Pike / Spear - Round End (match ID 4)
* Change 2 Part Pearl Dark Gray 93789 Minifigure, Weapon Pike / Spear - Flat End {Regular to Alternate} {match ID 0 to 4}
Comments from Submitter:
Parted out 3 sealed sets. 2 of them had the old version included.
|
|
Author: | 1977_mauro | Posted: | Sep 12, 2022 00:04 | Subject: | Inventory Change Request for Set 9389-1 | Viewed: | 30 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 973pb4273c01 Green Torso Sweater V-Neck over Button Down Blue Shirt Collar with 1 Button Pattern / Green Arms / Yellow Hands (match ID 13)
* Change 1 Part Green 973pb0708c01 Torso Sweater V-Neck over Button Down Bright Light Blue Shirt Collar with 2 Buttons and Yellow Neck Pattern / Green Arms / Yellow Hands {match ID 0 to 13}
Comments from Submitter:
From a sealed set.
|
|
|
Author: | 1977_mauro | Posted: | Aug 5, 2022 05:13 | Subject: | Inventory Change Request for Set 8877-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 32064c Dark Bluish Gray Technic, Brick 1 x 2 with Axle Hole (+ Shape) and Inside Side Supports (Alternate) (match ID 12)
* Change 1 Part Dark Bluish Gray 32064b Technic, Brick 1 x 2 with Axle Hole (x Shape) {match ID 0 to 12}
Comments from Submitter:
I think, we should swap the entries.
|
|
Author: | 1977_mauro | Posted: | Aug 5, 2022 02:51 | Subject: | Inventory Change Request for Set 8877-1 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 41752 Dark Bluish Gray Rubber Band / Belt Holder 2 x 4 x 2 1/3 (Alternate) (match ID 11)
* Change 1 Part Dark Gray 41752 Rubber Band / Belt Holder 2 x 4 x 2 1/3 {Extra to Regular} {match ID 0 to 11}
Comments from Submitter:
From a sealed set.
|
|
Author: | 1977_mauro | Posted: | Aug 5, 2022 02:42 | Subject: | Inventory Change Request for Set 1879-1 | Viewed: | 16 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3183c White Plate, Modified 1 x 4 with Tow Ball Socket, Short, 4 Slots (7mm Socket Length) (Alternate) (match ID 1)
* Change 1 Part White 3183b Plate, Modified 1 x 4 with Tow Ball Socket, Long, 4 Slots (8mm Socket Length) {match ID 0 to 1}
Comments from Submitter:
From a sealed set - the question is if this set came really with the old variant as well.
|
|
Author: | 1977_mauro | Posted: | Jul 31, 2022 09:39 | Subject: | Inventory Change Request for Set 79018-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change {1 to 2} Part Chrome Gold 11010 Minifigure, Utensil Ring 1 x 1 (Extra)
Comments from Submitter:
One of the parted out sets had 2 extra rings.
|
|
Author: | 1977_mauro | Posted: | Jul 31, 2022 09:37 | Subject: | Inventory Change Request for Set 79018-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 18034 Flat Silver Minifigure, Weapon Sword, Roman Gladius with Thick Crossguard (Alternate) (match ID 3)
* Change 2 Part Flat Silver 95673 Minifigure, Weapon Sword, Roman Gladius with Thin Crossguard {match ID 0 to 3}
Comments from Submitter:
Parted out 2 sealed sets. One of them had the old variant and the other one had the new variant included.
|
|
Author: | 1977_mauro | Posted: | Jul 29, 2022 00:54 | Subject: | Inventory Change Request for Set 10183-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Dark Bluish Gray {4623 Plate, Modified 1 x 2 with Bar Arm Up (Undetermined Type) to 4623a Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 6mm)}
Comments from Submitter:
Parted out 2 sealed sets, both had the new variant included.
|
|
Author: | 1977_mauro | Posted: | Jul 23, 2022 14:15 | Subject: | Inventory Change Request for Set 79014-1 | Viewed: | 31 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 4 Part 15571 Dark Bluish Gray Slope 45 2 x 1 Triple with Bottom Stud Holder (Alternate) (match ID 2)
* Change 4 Part Dark Bluish Gray 3048c Slope 45 2 x 1 Triple with Inside Bar {match ID 0 to 2}
Comments from Submitter:
Parted out 6 sealed sets. 2 of them had the new slope variant included.
|
|
Author: | 1977_mauro | Posted: | Jul 21, 2022 09:38 | Subject: | Inventory Change Request for Set 7048-1 | Viewed: | 28 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 2 Part 30516c02 Light Bluish Gray Turntable 4 x 4 Locking Grooved Base with Black Top
* Delete 1 Part 3403c01 Light Bluish Gray Turntable 4 x 4 Square Base with Same Color Top (3403 / 3404)
* Add 2 Part 30516 Light Bluish Gray Turntable 4 x 4 Locking Grooved Base
* Add 2 Part 30658 Black Turntable 4 x 4 Top, Locking
* Add 1 Part 3403 Light Bluish Gray Turntable 4 x 4 Square Base
* Add 1 Part 30658 Light Bluish Gray Turntable 4 x 4 Top, Locking
* Add 4 Part 61252 Light Bluish Gray Plate, Modified 1 x 1 with Open O Clip (Horizontal Grip) (Alternate) (match ID 5)
* Change 4 Part Black {6628 Technic, Pin with Friction Ridges and Tow Ball (Undetermined Type) to 6628a Technic, Pin with Friction Ridges and Tow Ball with Round Pin Hole}
* Change 4 Part Light Bluish Gray 6019 Plate, Modified 1 x 1 with U Clip (Horizontal Grip) {match ID 0 to 5}
Comments from Submitter:
From a sealed set.
The deleted assembled part 3403c01 was wrong. The turntable top is 30658.
|
|
Author: | 1977_mauro | Posted: | Jul 21, 2022 07:48 | Subject: | Shouldn't assembled part be listed correctly? | Viewed: | 86 times | Topic: | Catalog Requests | For: | Inventories Administrator | Status: | Completed | |
|
| In the set:
there are 2 parts maintained as assembled parts:
Both came unassembled, should we change teh listings or add them as alternates?
Mauro
|
|
Author: | 1977_mauro | Posted: | Jul 17, 2022 09:28 | Subject: | Cannot add an alternate part for extra part | Viewed: | 40 times | Topic: | Catalog Requests | For: | Inventories Administrator | Status: | Completed | |
|
| The set:
has an alternate part for the regular spear. As 1 spear appears as extra part
I wanted to add an alternate for it. When I maintain the Match ID for the extra
part I get following error:
Match ID already exists.
Mauro
|
|
Author: | 1977_mauro | Posted: | Jun 9, 2022 06:12 | Subject: | Inventory Change Request for Set 2153-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3070b Trans-Dark Blue Tile 1 x 1 with Groove (Extra)
* Add 1 Part 4592c01 Black Antenna Small Base with Yellow Lever (Extra)
Comments from Submitter:
From a sealed set.
|
|
Author: | 1977_mauro | Posted: | Jun 8, 2022 11:24 | Subject: | Inventory Change Request for Set 852001-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Black {48729 Bar 1L with Clip Mechanical Claw (Undetermined Type) to 48729a Bar 1L with Clip Mechanical Claw - Rounded Edges}
* Change 2 Part Black {4623 Plate, Modified 1 x 2 with Bar Arm Up (Undetermined Type) to 4623a Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 6mm)}
* Change 2 Part Light Bluish Gray {4623 Plate, Modified 1 x 2 with Bar Arm Up (Undetermined Type) to 4623a Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 6mm)}
Comments from Submitter:
From a sealed set.
|
|
Author: | 1977_mauro | Posted: | Jun 6, 2022 10:23 | Subject: | Inventory Change Request for Set 7637-1 | Viewed: | 25 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 98313 Black Arm Mechanical, Exo-Force / Bionicle, Thick Support (Alternate) (match ID 9)
* Add 1 Part 92926 Light Bluish Gray Container, Trash Can with 4 Cover Holders (Alternate) (match ID 10)
* Add 6 Part 61252 Dark Bluish Gray Plate, Modified 1 x 1 with Open O Clip (Horizontal Grip) (Alternate) (match ID 11)
* Add 2 Part 4085d Blue Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip) (Alternate) (match ID 12)
* Add 2 Part 60470b Light Bluish Gray Plate, Modified 1 x 2 with 2 Open O Clips (Horizontal Grip) (Alternate) (match ID 13)
* Add 5 Part 60470b Red Plate, Modified 1 x 2 with 2 Open O Clips (Horizontal Grip) (Alternate) (match ID 14)
* Add 2 Part 92099 Black Plate, Modified 4 x 6 with Trap Door Hinge (Long Pins) (Alternate) (match ID 15)
* Add 2 Part 87414 Black Tire 15mm D. x 6mm Offset Tread Small - Band Around Center of Tread (Alternate) (match ID 16)
* Change 1 Part Black 53989 Arm Mechanical, Exo-Force / Bionicle, Thin Support {match ID 0 to 9}
* Change 1 Part Light Bluish Gray 2439 Container, Trash Can with 2 Cover Holders {match ID 0 to 10}
* Change 6 Part Dark Bluish Gray 6019 Plate, Modified 1 x 1 with U Clip (Horizontal Grip) {match ID 0 to 11}
* Change 2 Part Blue 4085c Plate, Modified 1 x 1 with U Clip Thick (Vertical Grip) {match ID 0 to 12}
* Change 2 Part Light Bluish Gray 60470 Plate, Modified 1 x 2 with 2 U Clips (Horizontal Grip) {match ID 0 to 13}
* Change 5 Part Red 60470 Plate, Modified 1 x 2 with 2 U Clips (Horizontal Grip) {match ID 0 to 14}
* Change 2 Part Black 30042 Plate, Modified 4 x 5 with Trap Door Hinge {match ID 0 to 15}
* Change 2 Part Black 3641 Tire 15mm D. x 6mm Offset Tread Small {match ID 0 to 16}
Comments from Submitter:
From 2 sealed sets - see my previous change requests for this set from today first.
|
|
Author: | 1977_mauro | Posted: | Jun 6, 2022 04:41 | Subject: | Inventory Change Request for Set 7637-1 | Viewed: | 29 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 44301b Light Bluish Gray Hinge Plate 1 x 2 Locking with 1 Finger on End without Bottom Groove (Alternate) (match ID 8)
* Change 1 Part Dark Bluish Gray {48729 Bar 1L with Clip Mechanical Claw (Undetermined Type) to 48729b Bar 1L with Clip Mechanical Claw - Cut Edges and Hole on Side}
* Change 1 Part Dark Bluish Gray {48729 Bar 1L with Clip Mechanical Claw (Undetermined Type) to 48729b Bar 1L with Clip Mechanical Claw - Cut Edges and Hole on Side} (Extra)
* Change 1 Part Light Bluish Gray {44301 Hinge Plate 1 x 2 Locking with 1 Finger on End (Undetermined Type) to 44301a Hinge Plate 1 x 2 Locking with 1 Finger on End with Bottom Groove} {match ID 0 to 8}
* Change 4 Part Dark Bluish Gray {30350 Tile, Modified 2 x 3 with 2 Clips (Undetermined Type) to 30350c Tile, Modified 2 x 3 with 2 U Clips}
* Change 4 Part Reddish Brown {30350 Tile, Modified 2 x 3 with 2 Clips (Undetermined Type) to 30350c Tile, Modified 2 x 3 with 2 U Clips}
Comments from Submitter:
Parted out 2 sealed sets. One was an early copy and the second a late one (due to the included bricks).
Further change requests for alternatives will follow soon.
|
|
Author: | 1977_mauro | Posted: | May 27, 2022 06:34 | Subject: | Inventory Change Request for Set 7635-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 8 Part 87697 Black Tire 21mm D. x 12mm - Offset Tread Small Wide, Band Around Center of Tread (Alternate) (match ID 6)
* Add 2 Part 60470b Light Bluish Gray Plate, Modified 1 x 2 with 2 Open O Clips (Horizontal Grip) (Alternate) (match ID 7)
* Change 8 Part Black 6015 Tire 21mm D. x 12mm - Offset Tread Small Wide {match ID 0 to 6}
* Change 2 Part Light Bluish Gray 60470 Plate, Modified 1 x 2 with 2 U Clips (Horizontal Grip) {match ID 0 to 7}
Comments from Submitter:
From 2 sealed City Bundle Packs 66358 including this set.
|
|
Author: | 1977_mauro | Posted: | May 27, 2022 05:43 | Subject: | Inventory Change Request for Set 7684-1 | Viewed: | 29 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 48729b Dark Bluish Gray Bar 1L with Clip Mechanical Claw - Cut Edges and Hole on Side (Alternate) (match ID 3)
* Add 6 Part 92092 Red Hinge Train Gate 2 x 4 Locking Dual 2 Fingers without Rear Reinforcements (Alternate) (match ID 3)
* Change 1 Part Dark Bluish Gray {48729 Bar 1L with Clip Mechanical Claw (Undetermined Type) to 48729b Bar 1L with Clip Mechanical Claw - Cut Edges and Hole on Side} {match ID 3 to 0}
* Change 1 Part Dark Bluish Gray {48729 Bar 1L with Clip Mechanical Claw (Undetermined Type) to 48729b Bar 1L with Clip Mechanical Claw - Cut Edges and Hole on Side} (Extra)
* Change 6 Part Red 44569 Hinge Train Gate 2 x 4 Locking Dual 2 Fingers with Rear Reinforcements {match ID 0 to 3}
Comments from Submitter:
From 2 sealed City Bundle Packs 66358 including this set. Both had the new variant of hinge.
|
|
Author: | 1977_mauro | Posted: | May 26, 2022 01:18 | Subject: | Inventory Change Request for Set 7795-1 | Viewed: | 27 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Blue {3747b Slope, Inverted 33 3 x 2 with Connections between Studs to 3747a Slope, Inverted 33 3 x 2 without Connections between Studs}
Comments from Submitter:
From a sealed set. As the current source for the parts list is unknown I do not use the alternate option.
|
|
Author: | 1977_mauro | Posted: | May 25, 2022 10:10 | Subject: | Inventory Change Request for Set 3225-1 | Viewed: | 26 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 6 Part Red {6556 Window 1 x 4 x 3 Train - 2 Hollow Studs and 2 Solid Studs to 4033 Window 1 x 4 x 3 Train - Hollow Studs}
Comments from Submitter:
From a sealed set. I have changed the existing entry as the current source for this set was a parts list (what does it mean? there is no one as I can see)
|
|
Author: | 1977_mauro | Posted: | May 25, 2022 02:57 | Subject: | Inventory Change Request for Set 6472-1 | Viewed: | 28 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 6 Part 4624c02 White Wheel 8mm D. x 6mm with Black Tire 15mm D. x 6mm Offset Tread Small (4624 / 3641) (Counterpart)
* Delete 6 Part 3641 Black Tire 15mm D. x 6mm Offset Tread Small
* Delete 6 Part 4624 White Wheel 8mm D. x 6mm
* Add 6 Part 4624c02 White Wheel 8mm D. x 6mm with Black Tire 15mm D. x 6mm Offset Tread Small (4624 / 3641)
Comments from Submitter:
From a sealed set. The tires came assembled, for that reason the separated and the counterpart entries should be deleted.
|
|
Author: | 1977_mauro | Posted: | May 25, 2022 02:14 | Subject: | Inventory Change Request for Set 6472-1 | Viewed: | 25 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 4 Part White {6014u Wheel 11mm D. x 12mm (Undetermined Type) to 6014a Wheel 11mm D. x 12mm, Hole Round for Wheels Holder Pin}
Comments from Submitter:
From a sealed set.
|
|
Author: | 1977_mauro | Posted: | May 21, 2022 11:53 | Subject: | Inventory Change Request for Set 4539-1 | Viewed: | 25 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 3 Part 2493a White Window 1 x 4 x 5 with Solid Studs (Alternate) (match ID 1)
* Change 3 Part White 2493 Window 1 x 4 x 5 {match ID 0 to 1}
Comments from Submitter:
From a sealed set.
|
|
Author: | 1977_mauro | Posted: | May 21, 2022 11:35 | Subject: | Inventory Change Request for Set 7091-1 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 4589b White Cone 1 x 1 with Top Groove (Alternate) (match ID 3)
* Change 2 Part Black {32064 Technic, Brick 1 x 2 with Axle Hole to 32064c Technic, Brick 1 x 2 with Axle Hole (+ Shape) and Inside Side Supports}
* Change 2 Part White 4589 Cone 1 x 1 without Top Groove {match ID 0 to 3}
* Change 2 Part Dark Bluish Gray {44301 Hinge Plate 1 x 2 Locking with 1 Finger on End (Undetermined Type) to 44301a Hinge Plate 1 x 2 Locking with 1 Finger on End with Bottom Groove}
* Change 2 Part Red {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End and 9 Teeth with Bottom Groove}
Comments from Submitter:
From a sealed set.
|
|
Author: | 1977_mauro | Posted: | May 5, 2022 15:29 | Subject: | Inventory Change Request for Set 9630-2 | Viewed: | 35 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change {1 to 2} Part {Dark Bluish Gray to Dark Gray} 41753 Rubber Band / Belt Holder 2 x 6 x 2 1/3 (Extra)
Comments from Submitter:
There were 2 of these extra parts and the color should be now the old dark gray as the other parts have been changes as well.
|
|
Author: | 1977_mauro | Posted: | May 4, 2022 04:38 | Subject: | Inventory Change Request for Set 7415-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3749 Light Gray Technic, Axle 1L with Pin without Friction Ridges (Alternate) (match ID 2)
* Add 1 Part 3749 Tan Technic, Axle 1L with Pin without Friction Ridges (Extra)
* Change 1 Part Tan 3749 Technic, Axle 1L with Pin without Friction Ridges {match ID 0 to 2}
Comments from Submitter:
From 2 sealed sets.
One of them had 2 x 3749 in tan, the other one had 2 x 3749 in light gray (one is regular, the other one extra).
|
|
Author: | 1977_mauro | Posted: | May 4, 2022 03:40 | Subject: | Inventory Change Request for Set 9630-2 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 4274 Light Gray Technic, Pin 1/2 without Friction Ridges (Extra)
* Add 1 Part 32002 Dark Gray Technic, Pin 3/4 (Extra)
* Add 2 Part 3711 Black Technic, Link Chain (Extra)
* Add 1 Part 4265c Light Gray Technic Bush 1/2 Smooth (Extra)
* Add 1 Part 3713 Light Gray Technic Bush (Extra)
Comments from Submitter:
As a follow up of the changes made in the last week.
Now the inventory should be 100% correct.
|
|
Author: | 1977_mauro | Posted: | Apr 30, 2022 04:21 | Subject: | Inventory Change Request for Set 9630-2 | Viewed: | 28 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 2780 Black Technic, Pin with Friction Ridges (Extra)
Comments from Submitter:
There are also some other additional parts included in light gray or dark gray but I don't know if they exist as well in the newer version in light bluish gray or dark bluish gray on which the set inventory is based on. For that reason I have skipped them.
|
|
Author: | 1977_mauro | Posted: | Apr 30, 2022 03:59 | Subject: | Inventory Change Request for Set 9630-2 | Viewed: | 14 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 2711 Blue Technic, Plate 1 x 5 with Toothed Ends, 2 Studs and Center Axle Hole (Alternate) (match ID 10)
* Change 2 Part Blue 32124 Technic, Plate 1 x 5 with Smooth Ends, 4 Studs and Center Axle Hole {match ID 0 to 10}
|
|
Author: | 1977_mauro | Posted: | Apr 30, 2022 03:51 | Subject: | Inventory Change Request for Set 9630-2 | Viewed: | 16 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 6588 Yellow Technic, Gearbox 2 x 4 x 3 1/3 (Alternate) (match ID 9)
* Change 1 Part Trans-Clear 6588 Technic, Gearbox 2 x 4 x 3 1/3 {match ID 0 to 9}
|
|
Author: | 1977_mauro | Posted: | Apr 30, 2022 02:55 | Subject: | Inventory Change Request for Set 9630-2 | Viewed: | 17 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 6553 Yellow Technic, Axle 2L with Reverser Handle Axle Connector (Alternate) (match ID 8)
* Change 2 Part Light Bluish Gray 6553 Technic, Axle 2L with Reverser Handle Axle Connector {match ID 0 to 8}
|
|
Author: | 1977_mauro | Posted: | Apr 30, 2022 02:45 | Subject: | Inventory Change Request for Set 9630-2 | Viewed: | 12 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 4 Part 32064c Green Technic, Brick 1 x 2 with Axle Hole (+ Shape) and Inside Side Supports (Alternate) (match ID 7)
* Change 4 Part Green 32064b Technic, Brick 1 x 2 with Axle Hole (x Shape) {match ID 0 to 7}
|
|
Author: | 1977_mauro | Posted: | Apr 30, 2022 02:42 | Subject: | Inventory Change Request for Set 9630-2 | Viewed: | 12 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 4 Part 3651 Light Gray Technic, Axle and Pin Connector (Alternate) (match ID 6)
* Change 4 Part Light Bluish Gray 32013 Technic, Axle and Pin Connector Angled #1 {match ID 0 to 6}
Comments from Submitter:
See my previous request for this set.
In addition, my version has NO 2 x 6553 included. But I don't know how to visualize it the best.
|
|
Author: | 1977_mauro | Posted: | Apr 30, 2022 02:15 | Subject: | Inventory Change Request for Set 9630-2 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part x90 Yellow Rubber Belt Extra Large (Round Cross Section) - Approx. 5 x 5 (Extra)
* Add 1 Part x37 Red Rubber Belt Medium (Round Cross Section) - Approx. 3 x 3 (Extra)
* Add 2 Part 6575 Light Gray Technic Cam (Alternate) (match ID 1)
* Add 2 Part 2854 Light Gray Technic Engine Crankshaft Center (Alternate) (match ID 2)
* Add 8 Part 3749 Light Gray Technic, Axle 1L with Pin without Friction Ridges (Alternate) (match ID 3)
* Add 2 Part 4519 Black Technic, Axle 3L (Alternate) (match ID 4)
* Add 2 Part 32073 Black Technic, Axle 5L (Alternate) (match ID 5)
* Change 2 Part Dark Bluish Gray 6575 Technic Cam {match ID 0 to 1}
* Change 2 Part Dark Bluish Gray 2854 Technic Engine Crankshaft Center {match ID 0 to 2}
* Change 8 Part Tan 3749 Technic, Axle 1L with Pin without Friction Ridges {match ID 0 to 3}
* Change 2 Part Light Bluish Gray 4519 Technic, Axle 3L {match ID 0 to 4}
* Change 2 Part Light Bluish Gray 32073 Technic, Axle 5L {match ID 0 to 5}
Comments from Submitter:
From a sealed set.
As I have an earlier copy of this set, all the parts are in light / dark gray. 'Most likely' can be removed from the comment as we have now the proof.
It does not make sense to list all alternate parts in light or dark gray here but for the three parts above it makes sense as the old variant color (light gray) is different to the new variant colors (dark bluish gray / tan).
I have also added alternates for axles. The comment can be now adjusted here as well in regard to the axles.
It could be that further inventory chaneg requests will follow - still checking the content.
|
|
Author: | 1977_mauro | Posted: | Mar 7, 2022 01:12 | Subject: | Move Wanted List items to own inventory | Viewed: | 68 times | Topic: | Help | |
|
| Hi all,
I have some wanted lists with items of which I built up soem MOCs.
Now I wanted to part them out and sell them a s used parts.
Is it possible to somehow automatically upload these parts from the wanted lists
to my inventory?
Thanks in advance
Mauro
|
|
Author: | 1977_mauro | Posted: | Feb 24, 2022 14:52 | Subject: | Inventory Change Request for Set 10212-1 | Viewed: | 28 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 12 Part White {3794 Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 27 Part White {3684 Slope 75 2 x 2 x 3 (Undetermined Type) to 3684a Slope 75 2 x 2 x 3 - Hollow Studs}
Comments from Submitter:
From a sealed set.
|
|
Author: | 1977_mauro | Posted: | Feb 10, 2022 00:24 | Subject: | Inventory Change Request for Set 9474-1 | Viewed: | 25 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 8 Part 4085c Black Plate, Modified 1 x 1 with U Clip Thick (Vertical Grip) (Alternate) (match ID 1)
* Add 3 Part 3626bpb0719 Dark Red Minifigure, Head Dual Sided LotR Uruk-hai Scowling / Handprint Pattern - Blocked Open Stud (Alternate) (match ID 12)
* Add 1 Part 3626bpb0733 Light Nougat Minifigure, Head Dual Sided LotR Gimli Bushy Brown Eyebrows, Stern / Grimacing Pattern - Blocked Open Stud (Alternate) (match ID 13)
* Add 1 Part 3626bpb0754 Light Nougat Minifigure, Head Dual Sided LotR Goatee Smirk / Determined Pattern (King Theoden) - Blocked Open Stud (Alternate) (match ID 14)
* Change 8 Part Black {4085d Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip) to 4085b Plate, Modified 1 x 1 with U Clip Thin (Vertical Grip)}
* Change 8 Part Dark Bluish Gray {4085d Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip) to 4085b Plate, Modified 1 x 1 with U Clip Thin (Vertical Grip)}
* Change 8 Part Dark Bluish Gray {4085c Plate, Modified 1 x 1 with U Clip Thick (Vertical Grip) to 4085d Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)} (Alternate)
* Change 8 Part Black {4085b Plate, Modified 1 x 1 with U Clip Thin (Vertical Grip) to 4085d Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)} (Alternate)
Comments from Submitter:
From 7 sealed sets - the changes were discussed with an inventory administrator beforehand.
|
|
Author: | 1977_mauro | Posted: | Feb 8, 2022 14:35 | Subject: | Inventory Change Request for Set 9474-1 | Viewed: | 30 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Dark Bluish Gray {30237 Brick, Modified 1 x 2 with Clip (Vertical Grip) to 30237b Brick, Modified 1 x 2 with Open O Clip Thick (Vertical Grip)}
Comments from Submitter:
All my 7 sealed sets came with the new variant - in case the old variant has been proffed, make an alternate entry for that.
|
|
Author: | 1977_mauro | Posted: | Feb 8, 2022 11:34 | Subject: | Inventory Change Request for Set 9474-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 553c Black Brick, Round 2 x 2 Dome Top - Hollow Stud with Bottom Axle Holder x Shape + Orientation (Alternate) (match ID 10)
* Change 1 Part Black 553b Brick, Round 2 x 2 Dome Top - Blocked Open Stud with Bottom Axle Holder x Shape + Orientation {match ID 0 to 10}
Comments from Submitter:
2 of 7 sealed sets have the newest variant included.
|
|
Author: | 1977_mauro | Posted: | Feb 8, 2022 11:03 | Subject: | Inventory Change Request for Set 9474-1 | Viewed: | 26 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 75937 Black Plate, Modified 2 x 2 with Bar Frame Octagonal, Reinforced, Completely Round Studs (Alternate) (match ID 12)
* Change 1 Part Black 30033 Plate, Modified 2 x 2 with Bar Frame Octagonal {match ID 0 to 12}
Comments from Submitter:
All 7 sealed sets had the new variant included.
|
|
Author: | 1977_mauro | Posted: | Feb 8, 2022 10:25 | Subject: | Inventory Change Request for Set 9474-1 | Viewed: | 26 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 13 Part 3044c Dark Bluish Gray Slope 45 2 x 1 Double with Bottom Stud Holder (Alternate) (match ID 5)
* Change 13 Part Dark Bluish Gray {3044 Slope 45 2 x 1 Double (Undetermined Type) to 3044c Slope 45 2 x 1 Double with Bottom Stud Holder} {match ID 5 to 0}
Comments from Submitter:
New variant only found in 7 sealed sets.
Consider renumbering of alternates as a gap will occur after the deletion of the alternate entry.
|
|
Author: | 1977_mauro | Posted: | Feb 8, 2022 06:12 | Subject: | Inventory Change Request for Set 9474-1 | Viewed: | 24 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3455 Dark Bluish Gray Arch 1 x 6 (Alternate) (match ID 14)
* Change 1 Part Dark Bluish Gray 92950 Arch 1 x 6 Raised Arch {match ID 0 to 14}
Comments from Submitter:
One of 8 copies had the old variant included.
|
|
Author: | 1977_mauro | Posted: | Feb 8, 2022 05:52 | Subject: | Inventory Change Request for Set 9474-1 | Viewed: | 37 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 30374 Reddish Brown Bar 4L (Lightsaber Blade / Wand) (Alternate) (match ID 13)
* Change 1 Part Reddish Brown 87994 Bar 3L (Bar Arrow) {match ID 0 to 13}
Comments from Submitter:
Found one REDDISH BROWN with length of 4 instead of 3 in one of the 8 sealed sets.
It seems that this one set is one of the earliest copies of these sets on the market - all small parts were packed together with bigger parts (no separate small polybags) and the instructions were packed in a sealed polybag, during all other 7 sets are packed in not sealed polybags and stabilized by a carton paper.
|
|
Author: | 1977_mauro | Posted: | Feb 8, 2022 05:17 | Subject: | Inventory Change Request for Set 9474-1 | Viewed: | 25 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 5 Part 2453a Light Bluish Gray Brick 1 x 1 x 5 - Blocked Open Stud or Hollow Stud (Alternate) (match ID 12)
* Change 5 Part Light Bluish Gray 2453b Brick 1 x 1 x 5 - Solid Stud {match ID 0 to 12}
Comments from Submitter:
As stated in the previous request, parted out 8 sealed sets. In one of them I found exactly ONE brick with the old version. Other 4 bricks are the newer version.
|
|
Author: | 1977_mauro | Posted: | Feb 6, 2022 07:16 | Subject: | Inventory Change Request for Set 9474-1 | Viewed: | 29 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 2 Part 76768 Light Bluish Gray Arch 1 x 5 x 4 - Irregular Bow, Reinforced Underside (Alternate) (match ID 8)
* Add 2 Part 4495a Pearl Gold Flag 4 x 1 Wave Left (Alternate) (match ID 8)
* Change 2 Part Light Bluish Gray {2339 Arch 1 x 5 x 4 - Continuous Bow to 76768 Arch 1 x 5 x 4 - Irregular Bow, Reinforced Underside}
* Change 2 Part Pearl Gold 4495b Flag 4 x 1 Wave Right {match ID 0 to 8}
Comments from Submitter:
Parted out 8 sealed sets from different sources - even the bricks and instructions were packed differently.
In all 8 sets only the irregular bow bricks were included.
In 1 of them 2 yellow flag were with wave left and not right.
I have used as alternate number 8 for the flag using the existing one of the bow brick entry as I am requested to delete it herewith.
In case the continous bow brick has been already confirmed, use 11 for the alternate number instead.
Other change requests will follow when I have checked all the parts.
|
|
Author: | 1977_mauro | Posted: | Feb 5, 2022 06:25 | Subject: | Inventory Change Request for Set 79017-1 | Viewed: | 24 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 18838 Tan Arch 1 x 12 x 3 Raised Arch with 5 Cross Supports (Alternate) (match ID 2)
* Change 2 Part Tan 14707 Arch 1 x 12 x 3 Raised Arch with 1 Cross Support {match ID 0 to 2}
Comments from Submitter:
Parted out 5 sealed sets, all had the newest variant included.
|
|
Author: | 1977_mauro | Posted: | Jan 30, 2022 07:13 | Subject: | Inventory Change Request for Set 30211-1 | Viewed: | 29 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 2 Part 4623b Dark Bluish Gray Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 5mm) (Alternate) (match ID 1)
* Change 2 Part Dark Bluish Gray {4623 Plate, Modified 1 x 2 with Bar Arm Up (Undetermined Type) to 4623b Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 5mm)}
* Change 2 Part Dark Bluish Gray 53989 Arm Mechanical, Exo-Force / Bionicle, Thin Support {match ID 2 to 1}
* Change 2 Part Dark Bluish Gray 98313 Arm Mechanical, Exo-Force / Bionicle, Thick Support (Alternate) {match ID 2 to 1}
Comments from Submitter:
From a sealed set. The alternate mechanical arm was the alternate part in my set.
|
|
Author: | 1977_mauro | Posted: | Dec 18, 2021 02:34 | Subject: | Inventory Change Request for Set 5975-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Blue {4623 Plate, Modified 1 x 2 with Bar Arm Up (Undetermined Type) to 4623a Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 6mm)}
Comments from Submitter:
From a sealed set.
|
|
Author: | 1977_mauro | Posted: | Dec 9, 2021 11:17 | Subject: | Move 10236-1 Ewok Village to UCS | Viewed: | 81 times | Topic: | Catalog Requests | For: | Catalog Associate | Status: | Completed | |
|
| Hi Admins,
our UCS list on BL is nearly exactly the same as Brickset's list after my
request to put Death Star 10188 to the list.
Now the unique difference is Ewok Village:
Please move it as well to UCS. The reason is the same like for 10188 - all lists
without any exception do include this set as a UCS set (Brickset, Starwarscollector,
Brickimedia etc.)
Thanks Mauro
|
|
Author: | 1977_mauro | Posted: | Dec 9, 2021 05:51 | Subject: | Inventory Change Request for Set 9473-1 | Viewed: | 38 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 6 Part 3044c Dark Bluish Gray Slope 45 2 x 1 Double with Bottom Stud Holder (Alternate) (match ID 5)
* Add 8 Part 4085b Dark Bluish Gray Plate, Modified 1 x 1 with U Clip Thin (Vertical Grip) (Alternate) (match ID 1)
* Change 6 Part Dark Bluish Gray {3044 Slope 45 2 x 1 Double (Undetermined Type) to 3044c Slope 45 2 x 1 Double with Bottom Stud Holder} {match ID 5 to 0}
Comments from Submitter:
Parted out 6 sealed sets from different timelines.
All 6 had the new 3044c variant inside.
One of the 6 sets had the thin variant 4085b inside - all 8 parts.
|
|
Author: | 1977_mauro | Posted: | Nov 24, 2021 03:53 | Subject: | Move Death Star 10188-1 to UCS | Viewed: | 103 times | Topic: | Catalog Requests | For: | Catalog Associate | Status: | Completed | |
|
| Hi Admins,
please move this set:
to Ultimate Collection Series.
I can explain why we should do that. In the past it was already included as a
UCS set but was removed due to my request, as at this time 10188 was NOT listed
as UCS in BrickSet UCS list or other UCS lists on other pages.
You can see here the removal from UCS list:
https://www.bricklink.com/catalogReqList.asp?itemID=78848
When you now do the reasearch again, you will see that all UCS lists included
this set as a UCS set. For that reason we should reject my old request and put
it again to the UCS list.
I do not want to start the debate what UCS list means as there is no clear declaration
to that but for this set it is clear as we are the unique catalog that does not
include this set into the UCS list.
Thanks
Mauro
|
|
Author: | 1977_mauro | Posted: | Nov 21, 2021 11:01 | Subject: | Inventory Change Request for Set 9476-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Black {3794 Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)} (Alternate) {match ID 1 to 1}
Comments from Submitter:
Parted out 6 sealed sets - all had the oldest variant inside.
|
|
Author: | 1977_mauro | Posted: | Nov 21, 2021 05:25 | Subject: | Inventory Change Request for Set 9476-1 | Viewed: | 17 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 6 Part 4865 Dark Bluish Gray Panel 1 x 2 x 1 (Alternate) (match ID 5)
* Change 6 Part Dark Bluish Gray 4865b Panel 1 x 2 x 1 with Rounded Corners {match ID 0 to 5}
Comments from Submitter:
Parted out 6 sealed sets, one of them had the old variant inside.
|
|
Author: | 1977_mauro | Posted: | Sep 14, 2021 01:43 | Subject: | One sticker to much for UCS 10227? | Viewed: | 118 times | Topic: | Catalog | Status: | Open | |
|
| Hi all,
after buiulding the B-wing one orange sticker remained. Is this really teh case
or have I forgotten it somewhere?
Thanks in advance
Mauro
|
Author: | 1977_mauro | Posted: | Sep 10, 2021 02:17 | Subject: | Inventory Change Request for Set 10227-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change {1 to 4} Part Light Bluish Gray 4265c Technic Bush 1/2 Smooth (Extra)
Comments from Submitter:
Built up a sealed set - 6 regular parts were used in the space ship, remaining 4 are extra parts.
All other amounts of extra parts are correct.
|
|
Author: | 1977_mauro | Posted: | Sep 1, 2021 23:42 | Subject: | Inventory Change Request for Set 79010-1 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 6 Part 4497 Dark Brown Minifigure, Weapon Pike / Spear - Round End (Alternate) (match ID 6)
* Add 4 Part 4085b Black Plate, Modified 1 x 1 with U Clip Thin (Vertical Grip) (Alternate) (match ID 7)
* Change 6 Part Dark Brown 93789 Minifigure, Weapon Pike / Spear - Flat End {match ID 0 to 6}
* Change 4 Part Black 4085d Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip) {match ID 0 to 7}
Comments from Submitter:
Parted out 6 sealed sets. One of them had the new variants included.
|
|
Author: | 1977_mauro | Posted: | Aug 30, 2021 14:01 | Subject: | Inventory Change Request for Set 79012-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 18031 Flat Silver Minifigure, Weapon Sword, Greatsword Pointed with Thick Crossguard (Alternate) (match ID 3)
* Change 1 Part Flat Silver 98370 Minifigure, Weapon Sword, Greatsword Pointed with Thin Crossguard {match ID 0 to 3}
Comments from Submitter:
parted out 7 sealed sets. 4 of them had the new variant included.
|
|
Author: | 1977_mauro | Posted: | Aug 29, 2021 14:36 | Subject: | Inventory Change Request for Set 9471-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Dark Bluish Gray {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End and 9 Teeth with Bottom Groove}
Comments from Submitter:
Parted out 8 sealed sets. All of them had this variant included.
|
|
Author: | 1977_mauro | Posted: | Aug 28, 2021 10:13 | Subject: | Inventory Change Request for Set 8277-1 | Viewed: | 20 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628b Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Squared Pin Hole}
Comments from Submitter:
From a sealed set.
|
|
Author: | 1977_mauro | Posted: | May 25, 2021 13:15 | Subject: | Inventory Change Request for Set 6479-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 7 Part Yellow {4623 Plate, Modified 1 x 2 with Bar Arm Up (Undetermined Horizontal Arm Length) to 4623a Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 6mm)}
* Change 1 Part Black {x77a String, Cord Thin (Undetermined Length Type) to x77ac75 String, Cord Thin 75cm} (Extra)
Comments from Submitter:
From a sealed set. The extra string has the same length as the 4 regular strings.
|
|
Author: | 1977_mauro | Posted: | May 11, 2021 12:53 | Subject: | Inventory Change Request for Set 9797-1 | Viewed: | 36 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 973px126c01 White Torso Paradisa Sailboat with Sunset Pattern / Yellow Arms / Yellow Hands (Alternate) (match ID 21)
* Change 1 Part White 973px126newc01 Torso Paradisa Sailboat with Sunset Pattern, Inside with Ribs (Reissue) / Yellow Arms / Yellow Hands {match ID 0 to 21}
Comments from Submitter:
Parted out 3 sets, all had the alternate version of the torso.
|
|
Author: | 1977_mauro | Posted: | May 10, 2021 13:26 | Subject: | Inventory Change Request for Set 9580-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 4 Part 4485b Lime Minifigure, Headgear Cap - Short Curved Bill (Alternate) (match ID 1)
* Change 1 Part Lime 4485 Minifigure, Headgear Cap - Long Flat Bill {match ID 0 to 1}
Comments from Submitter:
Parted out 4 sealed sets, all had the short cap inside.
|
|
Author: | 1977_mauro | Posted: | May 6, 2021 22:53 | Subject: | Inventory Change Request for Set 6464-1 | Viewed: | 35 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Minifig soc045 Police - Sheriff Star and 2 Pockets, Black Legs, White Arms, Black Cap, Black Sunglasses
* Add 1 Minifig cop057 Police - Sheriff Star and 2 Pockets, Light Gray Legs, White Arms, Black Cap, Black Sunglasses
Comments from Submitter:
This is the follow-on of the wrong inventorized minifig, see:
https://www.bricklink.com/messageThread.asp?ID=289287
|
|
Author: | 1977_mauro | Posted: | May 6, 2021 11:12 | Subject: | Inventory Change Request for Set 6456-1 | Viewed: | 32 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 3 Part 6048b Black Arm Piece with Pin, 2 Fingers and Finger Grooves (Alternate) (match ID 1)
* Change 3 Part Black 6048 Arm Piece with Pin, 2 Fingers {match ID 0 to 1}
Comments from Submitter:
From a sealed set.
|
|
Author: | 1977_mauro | Posted: | May 6, 2021 07:29 | Subject: | Inventory Change Request for Set 6464-1 | Viewed: | 37 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 2447 Trans-Light Blue Minifigure, Visor Standard
* Add 4 Part 2447 Trans-Dark Blue Minifigure, Visor Standard (Extra)
Comments from Submitter:
There is no trans-light blue visor but only dark-blue visors, 1 in the minifig, 1 in the set, 4 are extra parts.
|
|
Author: | 1977_mauro | Posted: | May 6, 2021 07:05 | Subject: | Inventory Change Request for Set 6464-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part x39c01 Black Door 1 x 4 x 6 with 3 Panes with Trans-Light Blue Glass
* Delete 1 Part 30179 Red Door, Frame 1 x 4 x 6 with Four Holes on Top and Bottom
* Delete 1 Part 4208 Black String Reel 2 x 4 x 2 Drum
* Delete 1 Part 194cx2 Light Gray Minifigure, Utensil Hose Nozzle Simple with 35L Black String
* Add 1 Part 4208c01 Black String Reel 2 x 4 x 2 Drum with Light Gray Minifigure, Utensil Hose Nozzle Simple with 35L Black String (4208 / 194cx2)
* Change 6 Part White {4623 Plate, Modified 1 x 2 with Bar Arm Up (Undetermined Horizontal Arm Length) to 4623a Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 6mm)}
* Change 1 Part Red 30179c03 Door, Frame 1 x 4 x 6 with Four Holes on Top and Bottom with Black Door 1 x 4 x 6 with 3 Panes with Trans-Light Blue Glass (30179 / x39c01) {Counterpart to Regular}
Comments from Submitter:
From a selaed set. Several parts came already assembled!
|
|
Author: | 1977_mauro | Posted: | May 6, 2021 03:03 | Subject: | Inventory Change Request for Set 7469-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 7 Part 4032 White Plate, Round 2 x 2 with Axle Hole (Alternate) (match ID 1)
* Change 7 Part White 4032b Plate, Round 2 x 2 with Axle Hole (x Shape) {match ID 0 to 1}
Comments from Submitter:
From a sealed set - all parts were 4032.
|
|
Author: | 1977_mauro | Posted: | Apr 19, 2021 12:50 | Subject: | Inventory Change Request for Set 9389-1 | Viewed: | 17 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 4 Part 3957b Blue Antenna 4H - Flat Top (Alternate) (match ID 1)
* Add 4 Part 30237b Light Bluish Gray Brick, Modified 1 x 2 with Open O Clip Thick (Vertical Grip) (Alternate) (match ID 2)
* Add 4 Part 553c Black Brick, Round 2 x 2 Dome Top - Hollow Stud with Bottom Axle Holder x Shape + Orientation (Alternate) (match ID 3)
* Add 8 Part 3626cpb0628 Yellow Minifigure, Head Black Eyebrows, Thin Grin, Black Eyes with White Pupils Pattern - Hollow Stud (Alternate) (match ID 4)
* Add 8 Part 3626cpb0629 Yellow Minifigure, Head Female with Black Thin Eyebrows, Eyelashes, White Pupils and Red Lips Smile Pattern - Hollow Stud (Alternate) (match ID 5)
* Add 6 Part 4865b Yellow Panel 1 x 2 x 1 with Rounded Corners (Alternate) (match ID 6)
* Add 4 Part 87552 Trans-Clear Panel 1 x 2 x 2 with Side Supports - Hollow Studs (Alternate) (match ID 7)
* Add 5 Part 15456 Light Bluish Gray Plate, Modified 2 x 2 with Tow Ball and Hole (Alternate) (match ID 8)
* Add 2 Part 14769pb011 Yellow Tile, Round 2 x 2 with Bottom Stud Holder with Pizza Pattern (Alternate) (match ID 9)
* Add 2 Part 14181 White Wedge, Plate 4 x 9 with Stud Notches (Alternate) (match ID 10)
* Add 12 Part 34337 Light Bluish Gray Wheel 8mm D. x 6mm with Slot (Alternate) (match ID 11)
* Add 28 Part 34337 White Wheel 8mm D. x 6mm with Slot (Alternate) (match ID 12)
* Change 4 Part Tan {3794 Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Bottom Type) to 15573 Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)}
* Change 4 Part Blue 3957 Antenna 4H - Round Top {match ID 0 to 1}
* Change 4 Part Light Bluish Gray 30237 Brick, Modified 1 x 2 with Clip (Vertical Grip) {match ID 0 to 2}
* Change 4 Part Black 553b Brick, Round 2 x 2 Dome Top - Blocked Open Stud with Bottom Axle Holder x Shape + Orientation {match ID 0 to 3}
* Change 8 Part Yellow 3626bpb0628 Minifigure, Head Black Eyebrows, Thin Grin, Black Eyes with White Pupils Pattern - Blocked Open Stud {match ID 0 to 4}
* Change 8 Part Yellow 3626bpb0629 Minifigure, Head Female with Black Thin Eyebrows, Eyelashes, White Pupils and Red Lips Smile Pattern - Blocked Open Stud {match ID 0 to 5}
* Change 6 Part Yellow 4865 Panel 1 x 2 x 1 {match ID 0 to 6}
* Change 4 Part Trans-Clear 4864b Panel 1 x 2 x 2 - Hollow Studs {match ID 0 to 7}
* Change 5 Part Light Bluish Gray 3731 Plate, Modified 2 x 2 with Tow Ball {match ID 0 to 8}
* Change 2 Part Yellow 4150p02 Tile, Round 2 x 2 with Pizza Pattern {match ID 0 to 9}
* Change 2 Part White 2413 Wedge, Plate 4 x 9 without Stud Notches {match ID 0 to 10}
* Change 12 Part Light Bluish Gray 4624 Wheel 8mm D. x 6mm {match ID 0 to 11}
* Change 28 Part White 4624 Wheel 8mm D. x 6mm {match ID 0 to 12}
Comments from Submitter:
Parted out 2 sealed sets - both had the alternative versions.
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|