Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Re: Color id - tons_of_bricks (12776) | [...] Those big plates with the big round hole in them only comes in dark bluish gray, so I'd say the majority of this lot is dark bluish gray.
(51 months ago, Mar 3, 2020, to Catalog) |
Re: Color id - SylvainLS (46) | [...] Not very easy to say without a reference but there’s a plate that looks more olivey on the upper left, so I’d say most of it is DBG but there’s DG in there too.
(51 months ago, Mar 3, 2020, to Catalog) |
Color id - rick_holl (1439) | Bought this lot under ´dark grey’ but looks like dark bluish grey Don’t have it yet, just want to be sure i ordered the DBG one Thoughts?
(51 months ago, Mar 3, 2020, to Catalog) |
Incorrect weight - macyenco (2802) | Hi there, Can someone please enter the correct weight of instruction booklet 6624 Delivery Van. Due to Bricklink catalog the weight of this booklet is 55 grams, but it should [...]
(51 months ago, Mar 3, 2020, to Catalog) |
Re: DELETE ALL ITEM IN MY INVENTORY - jbroman (985) | [...] Why don't you put all items into a stockroom. This way the inventory is still there with the prices and you can just go in and change the quantity and then move it [...]
(51 months ago, Mar 2, 2020, to Catalog) |
DELETE ALL ITEM IN MY INVENTORY - otaviomoser (7366) | Hi, I would like to DELETE all items in my inventory and later upload them with the correct quantities. How should I do it? Thank you
(51 months ago, Mar 1, 2020, to Catalog) |
| Re: please change 40166 - StormChaser (569) | [...] [...] I made it easy for you: (Minifigure LLP003a) Please add a photo of this figure using this page: (URL)
(51 months ago, Feb 29, 2020, to Catalog) |
| Re: please change 40166 - paulvdb (7148) | [...] Minifigures can't have alternate parts. So an alternate minifigure needs to be added to the catalog. That new minifigure can then be added as an alternate to the [...]
(51 months ago, Feb 29, 2020, to Catalog) |
| please change 40166 - jbricks (18480) | set 40166 has a new counterpart in the minifig, the darktan hair is different in about half of the sets i parted, new partnumber that has to be added is, 25972 instead of 62810 [...]
(51 months ago, Feb 29, 2020, to Catalog) |
| Re: March Project - Sticker Sheet Restructuring - Admin_Russell | [...] [...] Regarding listing these with color, one of the things we would lose by doing it this way is the rather dependable position that sticker sheets occupy at the top [...]
(51 months ago, Feb 28, 2020, to Catalog) |
| Re: Dimensions 10507 - StormChaser (569) | [...] I did not design this website or the way it's intended to function. :) Nor do I have any significant input on the way it will operate in the future, at least [...]
(51 months ago, Feb 28, 2020, to Catalog) |
| March Project - Sticker Sheet Restructuring - StormChaser (569) | At long last, it is time. By the end of March, my goal is to eliminate duplicate catalog entries for sticker sheets: (URL) You can see that this has been moved from Section [...]
(51 months ago, Feb 28, 2020, to Catalog) |
| Re: Dimensions 10507 - SylvainLS (46) | [...] Sure should, and the description should be “Plate, Modified 1 x 2 with Tipper End Flat with Pins”! Barman, another one! The seagulls can walk.¹ (¹ Meaning it’s [...]
(51 months ago, Feb 27, 2020, to Catalog) |
Re: Dimensions 10507 - mfav (174)  | [...] If the next argument I hear is that it should be a 1 x 2 because that's how many anti-studs are on the bottom then the (Part 3145) should also be a 1 x 2, right?
(51 months ago, Feb 27, 2020, to Catalog) |
| Re: Dimensions 10507 - SylvainLS (46) | [...] Okay, the picture. And tt’s somewhat okay to have only “1 x 1” within the description because it’s followed by a “with…”, but what help is “1x1” in the size field? Or [...]
(51 months ago, Feb 27, 2020, to Catalog) |
| Re: Dimensions 10507 - mfav (174) | [...] True, but in terms of discovery...search...if you want to find something that's 1x1 and you find all these other things: 1 1/3, 1.4, 1 1/8, how useful is that set [...]
(51 months ago, Feb 27, 2020, to Catalog) |
| Re: Dimensions 10507 - TheBrickGuys (13286) | [...] But by looking at the picture it is very easy to determine what is meant by the 1x1 size and it is easy to see that the tooth sticks over the edge adding a little more [...]
(51 months ago, Feb 27, 2020, to Catalog) |
| Re: Dimensions 10507 - SylvainLS (46) | [...] Okay, thanks. And that’s also another example of the description containing the size but in another for (fractions instead of decimals). So the more I look into [...]
(51 months ago, Feb 27, 2020, to Catalog) |
| Re: Dimensions 10507 - FreeStorm (366) | [...] I do not think it's searchable If you take this part as example (Part 2383) Size: 1.12 x 2 x 1.67 in studs Description: 1 1/8 x 2 x 1 2/3 Searching "1.12" or "1.67" [...]
(51 months ago, Feb 27, 2020, to Catalog) |
| Re: Dimensions 10507 - mfav (174) | [...] That's true if the stud size dimensions are accurate; but when something is really 1 x 1.4 but is labeled 1 x 1...not so much.
(51 months ago, Feb 27, 2020, to Catalog) |
| Re: Dimensions 10507 - SylvainLS (46) | [...] Is the size field searchable? Because if it is not, then it greatly reduces its usefulness. (I can’t test if it is because I don’t know of a part that would have a [...]
(51 months ago, Feb 27, 2020, to Catalog) |
| Re: Dimensions 10507 - StormChaser (569) | [...] The primary purpose for including stud-size dimensions is so that builders will know the size of a part that they may not own and how that part would fit (or if it [...]
(51 months ago, Feb 27, 2020, to Catalog) |
| Re: Dimensions 10507 - FreeStorm (366) | [...] +1 And it's simpler to measure parts in [mm] than converting in studs and having some funny dimension like this part (Part 2383) Size: 1.12 x 2 x 1.67 in studs Description: [...]
(51 months ago, Feb 27, 2020, to Catalog) |
| Re: Dimensions 10507 - StormChaser (569) | [...] There shouldn't be any parts in the catalog with millimeters or centimeters in the dimensions field (only everything else but parts). If you know of any [...]
(51 months ago, Feb 27, 2020, to Catalog) |
| Re: Dimensions 10507 - mfav (174) | [...] It makes no sense to have stud size dimensions for anything in the dimensions field. Having some dimensions being mm and others being studs makes all of them useless. [...]
(51 months ago, Feb 27, 2020, to Catalog) |
| Re: Dimensions 10507 - StormChaser (569) | [...] I figured so. I tried an assortment of item numbers using the numbers you gave, but to no avail. [...] So that part is one of the parts that exists in a non-standard [...]
(51 months ago, Feb 27, 2020, to Catalog) |
| Re: How to make 'Special Assembly'? - StormChaser (569) | [...] [...] At the moment we're not particularly interested in adding new special assemblies because of the difficulties they present with inventories.
(51 months ago, Feb 27, 2020, to Catalog) |
| How to make 'Special Assembly'? - Emperor_Penguin (1362) | Hello, I was looking at the Special Assembly category (URL) And I was wondering how do you make one for the catalog? I wanted to make a few for some different assemblies, like [...]
(51 months ago, Feb 27, 2020, to Catalog) |
| Dimensions 10507 - mfav (174) | Why is 10507 listed as 1x1 in studs? 10507 is x: 7.9mm y: 11.2mm z: 11.1mm making it 1 x 1.4 in studs. Is this just another one of those places of inconsistency madness?
(51 months ago, Feb 27, 2020, to Catalog) |
| Re: Yo StormBluser, for the roadmap? - mfav (174) | [...] There's a lot to consider. 1. should a piece be restricted to its original part number? If 3713 is superceded by 6590, which is superceded by 42798, should those [...]
(52 months ago, Feb 26, 2020, to Catalog) |
| Re: Tooth vs Toothed - FlyingEugene (1497) | [...] Or maybe just left alone, and I use better search practices :D like "saber-t*" [...] A quick Google search returned that Saber-Tooth isn't a thing. It looks [...]
(52 months ago, Feb 26, 2020, to Catalog) |
| Re: Tooth vs Toothed - SylvainLS (46) | [...] Or sabre-toothed or sabretoothed or sabertoothed… ;) [...] When it’s not UK vs. US, it’s the Danes’ fault :D
(52 months ago, Feb 26, 2020, to Catalog) |
| Re: Tooth vs Toothed - axaday (7303) | [...] Or maybe just left alone, and I use better search practices :D like "saber-t*" [...] My formatting was garbage and you can't edit a post, so here is a replacement. [...]
(52 months ago, Feb 26, 2020, to Catalog) |
| Tooth vs Toothed - runner.caller (2651) | The other day I was searching the catalog. I typed in "Saber-Tooth" and only the following two minifigs came up. (Minifigure loc125) (Minifigure loc126) I was looking for (Part [...]
(52 months ago, Feb 26, 2020, to Catalog) |
| Re: Yo StormBluser, for the roadmap? - mfav (174) | I did note there would be pain associated with the proposal. Thus the question mark in the title. We’re finally getting three asp pages rewritten, so maybe the logjam on the [...]
(52 months ago, Feb 26, 2020, to Catalog) |
| Re: Yo StormBluser, for the roadmap? - StormChaser (569) | [...] Good idea and I added it to the roadmap (currently project 36): (URL) However, there are some things to consider here. First is that the a/b/c letters are generally [...]
(52 months ago, Feb 26, 2020, to Catalog) |
| Re: Yo StormBluser, for the roadmap? - Heartbricker (18199) | [...] In theory, it sounds reasonable. However, i fear it may hurt sellers/buyers that purchase parts for MOCs listed on 3rd party sites (i.e: Rebrickable) that may [...]
(52 months ago, Feb 25, 2020, to Catalog) |
| Yo StormBluser, for the roadmap? - mfav (174) | (URL) I know, there'll be pain with the renaming and whatnot, but it would be nice if all the axle holes on all the pieces were named consistently and were referred to in [...]
(52 months ago, Feb 25, 2020, to Catalog) |
| Re: 32553c06 - 69transamman (372) | Happy to contribute! Howard In Catalog, StormChaser writes: [...]
(52 months ago, Feb 25, 2020, to Catalog) |
| Re: 32553c06 - StormChaser (569) | [...] And this was the last one that needed to be approved: (Part 32553c06) Thank you very much for your assistance in providing pictures so that we could get all these entries [...]
(52 months ago, Feb 25, 2020, to Catalog) |
| 32553c06 - 69transamman (372) | Going thru some unsorted parts and I found the 32553 in dark bluish gray with the 32554 in trans dark blue that was missing from the catalog. I have uploaded the picture as a [...]
(52 months ago, Feb 25, 2020, to Catalog) |
| Re: name change not in log 3068bpb0139 - samsam2 (2376) | [...] For this part, sellers might want to see a change log to know that the listing has become more specific and they will need to check the part before shipping to verify [...]
(52 months ago, Feb 25, 2020, to Catalog) |
| Re: name change not in log 3068bpb0139 - Hygrotus (869) | [...] Not everything is logged here you have details: (URL) There is whole paragraph of things which are logged Item name change made by Catalog Administrators directly is not [...]
(52 months ago, Feb 25, 2020, to Catalog) |
| name change not in log 3068bpb0139 - samsam2 (2376) | I recently submitted a name change, it was rejected, no problem, but the name needed to be changed and it was, but I don't see any record in the logs regarding this very [...]
(52 months ago, Feb 25, 2020, to Catalog) |
Republic Fighter Tank 7679 - M.Boss (99) | (Set 7679-1)I bought used contained (Part 60470b) in black instead of (Part 60470) in black. I believe this part came with the set but do not want to make a catalog request without [...]
(52 months ago, Feb 23, 2020, to Catalog) |
| Re: Alternate Images (Rant) - waltzking (8746) | [...] Appreciate the understanding....wasn't directed at you specifically, but the general way things work around here of late. [...] Not to contradict, but BrickLink [...]
(52 months ago, Feb 23, 2020, to Catalog) |
| Re: Alternate Images - waltzking (8746) | [...] Yeah, we caught that and corrected when uploading the images the second round. But thanks for the note! Jonathan
(52 months ago, Feb 23, 2020, to Catalog) |
| Factory glued version of 6014ac01 - normann1974 (2291) | I've found glued versions of (Part 6014ac01) in at least two different lots of bricks that contained no other glued bricks. Can anyone confirm if these ever came factory [...]
(52 months ago, Feb 22, 2020, to Catalog) |
| Re: Bionicle Head Pictures - 69transamman (372) | I had a few minutes to play with my photo software and decided to add color names to the photo showing the 8 colors of 32554 that I posted previously. If you would like to swap [...]
(52 months ago, Feb 22, 2020, to Catalog) |
| Re: Bionicle Head Pictures - randyf (442) | [...] According to numerous sources, the inventory for (Set 6620-1) was completely random, so the inventory for that set will probably be removed in the near future. It is on [...]
(52 months ago, Feb 22, 2020, to Catalog) |
| Re: Bionicle Head Pictures - 69transamman (372) | I looked into which sets contained a 32553 (Part 32553)in White and found that 2 of them come in set #6620-1 (Set 6620-1) along with 2 of the 32554 (Part 32554) in Trans Neon [...]
(52 months ago, Feb 22, 2020, to Catalog) |
| Re: Bionicle Head Pictures - 69transamman (372) | I was following up on this thread and read that an image for 32554c05 in White had the wrong image and needed removal. I looked an it had been removed so, I retrieved my copy [...]
(52 months ago, Feb 22, 2020, to Catalog) |
| Re: Bionicle Head Pictures - randyf (442) | [...] The light gray one and red one have a trans-medium blue "brain". The white one for that part definitely has a trans-light blue "brain". That image needs to be removed.
(52 months ago, Feb 22, 2020, to Catalog) |
| Re: Missing printer friendly view - enig (6343) | [...] Not really an answer to your question, but you can "hack" it Your original printer friendly link (URL) URL end for your minifig page is M=lor035 change the S=30215-1 [...]
(52 months ago, Feb 21, 2020, to Catalog) |
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
