| Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | 69transamman  | | Posted: | May 1, 2019 23:19 | | Subject: | Re: Part Identification? | | Viewed: | 29 times | | Topic: | Catalog | |
| In Catalog, 1Kennewickman writes:
| | From Kennewickman1, I called LEGO and they informed me that this part is a part
from the new LEGO SPIKE Prime robot system and the part will not be available
until the 1st of June  Thank you for your help.
In Catalog, 69transamman writes:
| | It is very similar to part #64179 but it appears to be larger. Judging
by the photo it looks to be 7 X 11 (best guess). If it's in the catalog it
isn't under Technic Liftarm. Where did the photo come from? Is it truly LEGO
red or is it a hot pink?
Howard
In Catalog, 1Kennewickman writes:
| | Can anyone out there help identify the below red colored technic part ID number?
Thank you from Oregon.
|
|
|
Bummer that they aren't available for another month but, not as bad as not
coming out until Christmas! Curiosity got the better of me so, I googled "LEGO
SPIKE Prime robot". Interesting looking set. From the images I saw it looks like
that part will be magenta/hot pink in color. Not sure what bricklink color it
falls under. Looks like it's going to have some unique wheels and a new power
pack as well. Are the 2x4 bricks with the 3 axle holes new also?
Howard
|
|
 |
| Author: | 69transamman | | Posted: | May 1, 2019 22:46 | | Subject: | Re: Part Identification? | | Viewed: | 31 times | | Topic: | Catalog | |
| It is very similar to part #64179 but it appears to be larger. Judging
by the photo it looks to be 7 X 11 (best guess). If it's in the catalog it
isn't under Technic Liftarm. Where did the photo come from? Is it truly LEGO
red or is it a hot pink?
Howard
In Catalog, 1Kennewickman writes:
| | Can anyone out there help identify the below red colored technic part ID number?
Thank you from Oregon.
|
|
|
| Author: | 69transamman | | Posted: | Feb 27, 2019 09:30 | | Subject: | Re: Last Request today - Pin and Paddle | | Viewed: | 31 times | | Topic: | Catalog | |
| Looks like you have one of three versions of part #6048.
[p=6048],
* | | 6048b Arm Piece with Pin, 2 Fingers and Finger Grooves
Parts: Arm |
,
* | | 6048c Arm Piece with Pin, 2 Fingers and Outside Thread Grooves
Parts: Arm |
Howard
In Catalog, JLRSextra writes:
| | Hello All,
Thank you all for your amazing quick replies to my queries this morning. Great
BrickLink community!
These have a pin with a split semi-circle paddle(?) on the other side. Is this
LEGO?
|
|
|
| Author: | 69transamman | | Posted: | Jan 11, 2019 00:37 | | Subject: | Inventory Change Request for Set 6202-1 | | Viewed: | 30 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Delete 3 Part 4497u Flat Silver Minifigure, Weapon Pike / Spear - (MARKED FOR DELETION - Undetermined End Version)
* Add 3 Part 4497 Flat Silver Minifigure, Weapon Pike / Spear - Round End
Comments from Submitter:
Verification from video of a sealed set opening. The round ends on the spears can be seen clearly at the 7:35 mark. Commentator describes spears as not being rubbery as in previous Hero Factory releases but, being actual plastic.
https://www.youtube.com/watch?v=AOqx4x93aDg
|
|
| Author: | 69transamman | | Posted: | Dec 5, 2018 17:49 | | Subject: | Re: Inventory Change Request for Set 9252-2 | | Viewed: | 17 times | | Topic: | Inventories Requests | |
| I just have to say that no matter what the subject is, I always read thru your
post completely in search of the humor you often interject! Doesn't matter
to me if it's natural, drug or alcohol induced, sleep deprivation, or simply
that the rest of bricklink has driven you mad---I appreciate a good chuckle/chortle/guffaw!
Thanks for all you do!
Howard
In Inventories Requests, StormChaser writes:
| | In Inventories Requests, StormChaser writes:
I wanted to include some additional information about this set for future reference
and an inventory change is the best way to do that.
First, I personally and carefully checked every single brick in this set from
sealed contents for which I opened every bag and handled the parts (photos of
my set attached). Mine was the early version of the set released in 1991 and
there were 12 bags in the set. All of the bricks included cross supports except
a single 2 x 3 brick in yellow (the other 11 of the same brick had cross supports).
This is a late appearance for this brick (two years late according to BrickLink's
current timeline) and I was surprised to find it, but there it was.
As for inside supports, those little ridges inside the brick which are only currently
distinguished for one brick (the Brick 2 x 2 without Inside Supports in case
the title or part number changes in the future):
All bricks in the set, including those with designs, had these ridges with the
exceptions listed below. I mention this because it will be useful data if we
decide to distinguish these parts in the future (I compared the parts listed
below (except the last two, for which I had no comparison parts) to recent examples
and all of the newer bricks I checked had inside supports).
The aforementioned 2 x 3 brick in yellow without cross supports.
All 2 x 6 bricks in the set.
All 2 x 8 bricks in the set.
All 2 x 10 bricks in the set.
All 4 x 12 bricks in the set.
All 8 x 16 bricks in the set.
The empty window frames had hollow studs as I indicated in the inventory. The
bricks with eyes had no white included as indicated in the inventory.
Finally, and I really don't think we'd ever distinguish this difference,
exactly half of the doors and windows were attached to the left and half to the
right. So two doors attached facing left and four windows attached facing left
and the same number of each facing right. TLG did not distinguish this difference
and I see no need for us to. The door and window directions are easily reversible.
The complete contents of the set are the storage case with no lid, 12 bags of
parts and four green large bricks loose, the cover/inventory cardboard with nothing
printed on the other side, four double-sided activity/instructions cards, and
the informational sheet of paper. All of these are included in an outer original
box with the set number printed thereupon. I have the activity cards from the
1994 version and verified that each of these was different than the 1991 version
in spite of having the same 6-digit identification number printed on each card
for both versions.
I'm certain this last bit has no relevance whatsoever to the discussion,
but I mention it for the sake of completeness: my second cousin's first name
is Frank.
|
|
|
| Author: | 69transamman | | Posted: | Oct 23, 2018 00:24 | | Subject: | Re: 6197u How Do I sell the one I have? | | Viewed: | 46 times | | Topic: | Catalog | |
| In Catalog, dcarmine writes:
| | I can sell the cupboard by itself, but the door is listed. I looked for an assembly
but I didn't see one. Can you point me to the catalog entry that allows
me to sell it?
I do have an assembly, white with red door.
Any help is appreciated.
Donna
|
I looked for an assembly but couldn't find one (Might be due to it's
varied uses.???) I did find the following parts.
Hope it helps!
Howard
|
|
| Author: | 69transamman | | Posted: | Sep 22, 2018 20:28 | | Subject: | Re: set 7676 | | Viewed: | 37 times | | Topic: | Inventories | |
| In Help, mophead writes:
| | Am I to believe set #7676 (as shown in sets and their parts info) that part #4515
listed as only 4 pieces in set. Yet by all indications there are six stickers?
peeron also lists only four pieces in set. I know you cannot apply sticker to
both sides of that piece. Anybody know what I am dealing with here? trying to
put it together...not sure how many of 4515 I really need.
Thanks
|
Only 4 part #4515 are needed to complete the build for this set. This set came
with optional stickers in case you have more than one and want to display them
together but have them be distinctive. I found the following at brickset;
"Take the battle to the Separatists with the Republic Attack Gunship! This heavily
armed and armored Clone Wars troop carrier can fly and land in any battlefield
or hostile terrain. Features include opening troop bay doors, removable command
station and healing chamber, positionable cannons, spy droids, flick missiles,
a speeder bike that deploys from the back, and multiple decals to create different
gunships for your army. But will even Obi-Wan Kenobi and Plo Koon be enough
to stop the sinister Asajj Ventress and her double Sith lightsabers? Includes
Obi-Wan Kenobi, Plo Koon, Asajj Ventress, Commander Cody and Clone Trooper minifigures!
Side troop bay doors open! Open the front side compartment to remove the command
station! The 2 cockpits in front and the 2 on the wings open! Features 8 positionable
flick-fire missiles on top and 2 rotating missiles in front! Back hatch opens
to deploy the speeder bike! Open the compartment on top to access the spy droids!
Measures 14" (36cm) long, 17" (43cm) wide and 7" (18cm) high"
If I were building this for myself I would get an extra pair of 4515's and
apply the extra stickers for easier storage.
Howard
|
|
|
|
)
)
