Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | SezaR  | | Posted: | Jul 22, 2021 21:12 | | Subject: | Inventory Change Request for Set 6540-1 | | Viewed: | 19 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part x77 Black String, Cord (Undetermined Type)
* Add 1 Part x77ac30 Black String, Cord Thin 30cm
* Add 4 Part 4073c01 Black Plate, Round 1 x 1, 2 on Sprue (match ID 1)
* Add 2 Part 4073c01 Trans-Dark Blue Plate, Round 1 x 1, 2 on Sprue (match ID 2)
* Add 2 Part 4073c01 Trans-Red Plate, Round 1 x 1, 2 on Sprue (match ID 3)
* Add 3 Part 4073c01 Trans-Yellow Plate, Round 1 x 1, 2 on Sprue (match ID 4)
* Add 1 Part 4073c01 White Plate, Round 1 x 1, 2 on Sprue (match ID 5)
* Delete 4 Part 4624 White Wheel 8mm D. x 6mm
* Delete 4 Part 3641 Black Tire 15mm D. x 6mm Offset Tread Small
* Change 8 Part Black 4073 Plate, Round 1 x 1 {Regular to Alternate} {match ID 0 to 1}
* Change 3 Part Trans-Dark Blue 4073 Plate, Round 1 x 1 {Regular to Alternate} {match ID 0 to 2}
* Change 4 Part Trans-Red 4073 Plate, Round 1 x 1 {Regular to Alternate} {match ID 0 to 3}
* Change 6 Part Trans-Yellow 4073 Plate, Round 1 x 1 {Regular to Alternate} {match ID 0 to 4}
* Change 2 Part White 4073 Plate, Round 1 x 1 {Regular to Alternate} {match ID 0 to 5}
* Change 4 Part White 4624c02 Wheel 8mm D. x 6mm with Black Tire 15mm D. x 6mm Offset Tread Small (4624 / 3641) {Counterpart to Regular}
* Change 1 Part Trans-Dark Blue 4073 Plate, Round 1 x 1 {Extra to Alternate} {match ID 0 to 2}
|
 |
| Author: | SezaR | | Posted: | Jul 20, 2021 13:31 | | Subject: | Re: Inventory Change Request for Set 163-1 | | Viewed: | 32 times | | Topic: | Inventories Requests | |
| In Inventories Requests, Steineflut writes:
| | In Inventories Requests, Turez writes:
| | In Inventories Requests, Steineflut writes:
| | Please make changes to the following inventory:
* Delete 4 Part 3185 Black Fence 1 x 4 x 2
* Delete 4 Part 3358 Black Fence Gate 1 x 3 x 2
* Delete 4 Part 3359 Black Fence Gate 1 x 3 x 2 Base
Comments from Submitter:
These parts are not part of the set. They are not in the building instructions and can't be seen anywhere on pictures. They simply don't exist.
|
The parts are shown on one side of the box and were added to the inventory many
years ago be a known and reliable contributer.
http://www.peeron.com/inv/sets/163-1?showpic=11770
Do you have any evidence that they were not included in the set?
|
Interesting! I did not see that. However, I think they are still not part of
the inventory!
I bought a set from the original owner (super good condition, stickers are still
untouched) and the only things missing are those that are not shown in the instructions.
|
What is the length of wire in your set?
| | In addition to those mentioned above I found that there are other bricks not
in the correct amount as they are NOT in the instructions and were also not included
in my set:
- 4 1x4 bricks blue (8 are currently in the ivnentory, only 4 are included for
build B)
- 1 1x2 plate blue (2 are currently in the ivnentory, only 1 is included for
build C step 4)
- 3 2x3 plate blue (4 are currently in the ivnentory, only 1 is included for
build C step 7)
- 5 2x4 plate light gray (there's none needed for any build and none included
but 5 in BL inventory)
|
Maybe you can build other models on the back of the set and see if these bricks
are used?
| |
It would be a weird coincidence that those that are only shown on the outside
pictures are by accident the ones missing from my set.
|
This can be simply because these are exactly those bricks not used on the main
model.
|
|
| Author: | SezaR | | Posted: | Jul 20, 2021 13:05 | | Subject: | Re: Inventory Change Request for Set 6388-1 | | Viewed: | 22 times | | Topic: | Inventories Requests | |
| In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Delete 4 Part 4073 Trans-Red Plate, Round 1 x 1
* Delete 6 Part 4073 Trans-Yellow Plate, Round 1 x 1
* Add 2 Part 4073c01 Trans-Red Plate, Round 1 x 1, 2 on Sprue
* Add 3 Part 4073c01 Trans-Yellow Plate, Round 1 x 1, 2 on Sprue
|
|
|
|
| Author: | SezaR | | Posted: | Jul 20, 2021 13:05 | | Subject: | Inventory Change Request for Set 6388-1 | | Viewed: | 26 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Delete 4 Part 4073 Trans-Red Plate, Round 1 x 1
* Delete 6 Part 4073 Trans-Yellow Plate, Round 1 x 1
* Add 2 Part 4073c01 Trans-Red Plate, Round 1 x 1, 2 on Sprue
* Add 3 Part 4073c01 Trans-Yellow Plate, Round 1 x 1, 2 on Sprue
|
| Author: | SezaR | | Posted: | Jul 20, 2021 03:41 | | Subject: | Re: THIS IS A TEST | | Viewed: | 49 times | | Topic: | Catalog Requests | |
| In Catalog Requests, hpoort writes:
| | In Catalog Requests, Admin_Russell writes:
It would be nice to know what you are actually testing...
|
They are testing if a public thread would boost sales of a rare unwanted catalog
from 1970, for no copy of this catalog was ever sold.
|
|
| Author: | SezaR | | Posted: | Jul 18, 2021 05:03 | | Subject: | Re: Are Buyers allowed to use Drop-Shipping ? | | Viewed: | 50 times | | Topic: | Buying | |
| In Buying, Shiny_Stuff writes:
| | In Buying, StarBrick writes:
| | In Buying, yorbrick writes:
| | In Buying, Shiny_Stuff writes:
| | Are Buyers allowed to use Drop-Shipping to receive purchases?
|
BL doesn't forbid it, so it is OK as long as the addresses are correct and
the buyer is not selling via drop shipping on BL. It may be an issue on the site
where the drop shipper is selling but that is an issue for them and not BL.
|
Last time I checked, you need to have the items that are for sale 'in hand'.
Meaning, you have to have the actual items.
Drop-shipping is buying the items from another seller, and having it shipped
to your buyer. That doesn't comply with the 'in hand'-rule.
But when Lego bought BL, this rule might have gone down the .....
So I reckon, it is NOT ALLOWED. Any second thoughts are welcome.
|
What you mention deals with SELLING on BrickLink. The case I mention is about
a BUYER. Once an order is paid, a buyer can do whatever they want with their
purchase.
I have no idea WHY the buyer I mentioned had their buying privileges revoked.
I only suspect it was because they were directing their purchases to various
drop addresses and presumably having those drop recipients repack and reship
the Lego to the final destination. There may be some other completely different
circumstances that lead to buying privileges being revoked -- I have no way
of knowing.
Still, I would like to know the answer to my original question -- can BUYERS
use Drop-Shipping for BL purchases?
|
Yes,
I used it several times. What is wrong with that?
BL even allows buyer to change address at check out.
|
|
| Author: | SezaR | | Posted: | Jul 16, 2021 17:10 | | Subject: | Re: SET 6361-1 PART x77a | | Viewed: | 32 times | | Topic: | Inventories | |
| In Inventories, gian8482 writes:
| | Hi to everyone,
I noticed that in the inventory for set 6361-1 (Mobile Crane), the part x77a
has undetermined length.
I own this set but the string is missing, so I want to buy another one.
Does someone that owns the set can tell me the correct length to buy another
one and eventually correct the inventory?
Thanks
Gianluca
|
Most likely 75cm.
|
|
| Author: | SezaR | | Posted: | Jul 15, 2021 01:12 | | Subject: | Re: What the ....?!! | | Viewed: | 35 times | | Topic: | Help | |
| In Help, SezaR writes:
| | Dear SezaR,
This is to notify you that your store has been closed per your store setting
to automatically close your store after not logging in to the site for 3 days.
This setting and the option to reopen your store is located at:
http://www.bricklink.com/pref_seller.asp
Ok, I am gonna open it but I hope this does not happen reguarly, specially after
midnight!
|
Yes, I had assumed my store got closed but I checked after I wrote here and it
has remained open.
|
|
| Author: | SezaR | | Posted: | Jul 15, 2021 00:48 | | Subject: | What the ....?!! | | Viewed: | 192 times | | Topic: | Help | |
| Dear SezaR,
This is to notify you that your store has been closed per your store setting
to automatically close your store after not logging in to the site for 3 days.
This setting and the option to reopen your store is located at:
http://www.bricklink.com/pref_seller.asp
Ok, I am gonna open it but I hope this does not happen reguarly, specially after
midnight!
|
|
| Author: | SezaR | | Posted: | Jul 12, 2021 17:17 | | Subject: | Re: Deliverytimes USA, payalclaim | | Viewed: | 46 times | | Topic: | Help | |
| In Help, JYtoys writes:
| | In Help, Bricks_And_More writes:
| | Yep, it seems that my first paypalclaim is coming.
Order of 482 euro's.
Order shipped 22th of june. Arrived at customs in the USA the 24th of june and
is stuck there since. I have allready asked the buyer of being patience because
there could be massive delays and asked PostNL at my side to do an investigation.
Asked the buyer to contact customs in his country.
Buyes said its almost a month, we will put in a paypapclaim. Buyer has 32 feedback.
I think this is not the way to do business, it is wrong from me to ask for a
little more patience?
What do you think??
|
WE paid EUR 85.80 for shipping which is enough for fast shipping, You use the
slow shipping method, You should be ashamed for this ,you have to take responsibility
for this issue.
|
The sellers shipped with PostNl, the national postal service of his country.
It is known to be very reliable.
You paid Euro 85.80 because PostNl charged Euro 85.80. What part of this is the
seller's fault?
| | which is enough for fast shipping, You use the slow shipping method
|
Have you done a research on all services that PostNl provide? Based on your comment,
it looks like you know there is a cheaper option that is slow but for Euro 85.80,
PostNl ship with a super fast shipping method. Can you show me a link to the
various shipping methods of PostNl and their costs?
You also have tracking and checked that the parcel reached USA within (about)
2 days. Since then it sits in the customs of USA. You know that but still think
this has something to do with the shipping methods of PostNl!
| | You should be ashamed for this,you have to take responsibility for this issue.
|
I am not sure if you have plans to order from other sellers, but other sellers
read the forum and will decide to stoplist you or not. As a buyer, my experience
on Bricklink is that most sellers would do their best to provide the best service,
however they avoid unreasonable buyers at all costs.
I don't have any control on what other sellers decide to do but you can check
in your profile if you are stoplisted by other sellers or not.
|
|
| Author: | SezaR | | Posted: | Jul 9, 2021 20:02 | | Subject: | Re: Inventory Change Request for Set 165-1 | | Viewed: | 26 times | | Topic: | Inventories Requests | |
| In Inventories Requests, Admin_Russell writes:
| | In Inventories Requests, SezaR writes:
| | In Inventories Requests, Admin_Russell writes:
| | In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Add 1 Minifig pln150 Plain Blue Torso with Blue Arms, Red Legs, Black Hat
* Change {9 to 7} Part Red 3005 Brick 1 x 1
Comments from Submitter:
The minifig can be seen on the back of the box.
Seven Red Bricks 1 x 1 can be seen on the following steps:
Two - step 4
One - step 6
Two - step 7
Two - step 10
Total=7
|
In Step 7 there are 4 (2 are at the very far right).
The minifigure with the red legs is simply a prototype that was replaced by the
one with a red torso in production.
|
The 3rd minifigure appears on the box art, and on the images of the set on the
instructions and the catalogs. The instructions only shows how to build one minifg
and consider that enough for the kid to find out how to build other minifig(s).
How do you know the third minifig was just a prototype?
|
Are there ever three minifigures shown together in one image? This was the very
first year of the minifigure so the standard of showing each minifigure built
in the instructions wasn't fully developed yet.
|
no but both of these requests are correct with evidence.
There are only 7 red 1x1 bricks.
I will write more about this later.
|
|
| Author: | SezaR | | Posted: | Jul 9, 2021 19:36 | | Subject: | Re: Inventory Change Request for Set 165-1 | | Viewed: | 22 times | | Topic: | Inventories Requests | |
| In Inventories Requests, Admin_Russell writes:
| | In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Add 1 Minifig pln150 Plain Blue Torso with Blue Arms, Red Legs, Black Hat
* Change {9 to 7} Part Red 3005 Brick 1 x 1
Comments from Submitter:
The minifig can be seen on the back of the box.
Seven Red Bricks 1 x 1 can be seen on the following steps:
Two - step 4
One - step 6
Two - step 7
Two - step 10
Total=7
|
In Step 7 there are 4 (2 are at the very far right).
The minifigure with the red legs is simply a prototype that was replaced by the
one with a red torso in production.
|
The 3rd minifigure appears on the box art, and on the images of the set on the
instructions and the catalogs. The instructions only shows how to build one minifg
and consider that enough for the kid to find out how to build other minifig(s).
How do you know the third minifig was just a prototype?
|
|
| Author: | SezaR | | Posted: | Jul 8, 2021 14:06 | | Subject: | Re: Inventory Change Request for Set 165-1 | | Viewed: | 31 times | | Topic: | Inventories Requests | |
| In Inventories Requests, Admin_Russell writes:
| | In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Add 1 Minifig pln150 Plain Blue Torso with Blue Arms, Red Legs, Black Hat
* Change {9 to 7} Part Red 3005 Brick 1 x 1
Comments from Submitter:
The minifig can be seen on the back of the box.
Seven Red Bricks 1 x 1 can be seen on the following steps:
Two - step 4
One - step 6
Two - step 7
Two - step 10
Total=7
|
In Step 7 there are 4 (2 are at the very far right).
|
step 7
http://www.peeron.com/scans/165-1/8/
I only see two 1x1 red bricks.
In the photo attached:
The black circles: four 6x1 red bricks.
The blue circles: two 2x1 red bricks.
The green circles: two 1x1 red bricks.
| | The minifigure with the red legs is simply a prototype that was replaced by the
one with a red torso in production.
|
It did come with this set.
|
|
|
| Author: | SezaR | | Posted: | Jul 3, 2021 05:23 | | Subject: | Inventory Change Request for Set 6274-1 | | Viewed: | 16 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Delete 2 Part 4073 Trans-Yellow Plate, Round 1 x 1
* Add 1 Part 4073c01 Trans-Yellow Plate, Round 1 x 1, 2 on Sprue
Comments from Submitter:
Have two complete copies of this set in very good condition with box and instructions and everything. I got the Canadian one from the first owner. The spare sprues for trans-yellow 4073c01 are still in the boxes!
The catalog of my American's one is from 1991.
|
|
| Author: | SezaR | | Posted: | Jul 3, 2021 03:30 | | Subject: | Re: Add note for 367a | | Viewed: | 31 times | | Topic: | Catalog Requests | |
| In Catalog Requests, hpoort writes:
| | In Catalog Requests, SezaR writes:
| |
Some of these baseplates were originally cut from larger baseplates by the Lego
company. This left two sides rough and white from the cut and two sides smooth
and grey from the original baseplate.
|
I believe it was not 'some' but 'all'. Aren't these baseplates
vacuum formed from rolls of material?
|
I own both types.
|
| Author: | SezaR | | Posted: | Jul 3, 2021 02:23 | | Subject: | Add note for 367a | | Viewed: | 61 times | | Topic: | Catalog Requests | | For: | Catalog Associate | | Status: | Completed | |
|
Some of these baseplates were originally cut from larger baseplates by the Lego
company. This left two sides rough and white from the cut and two sides smooth
and grey from the original baseplate.
|
|
| Author: | SezaR | | Posted: | Jul 2, 2021 20:25 | | Subject: | Re: Inventory Change Request for Set 080-1 | | Viewed: | 27 times | | Topic: | Inventories Requests | |
| In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Add 1 Part 3020 Trans-Clear Plate 2 x 4
* Change {3 to 2} Part Yellow 3006 Brick 2 x 10
Comments from Submitter:
1) at inventory there are 3 Yellow 2x10 listed, I can only find use for 2 .(the third one on the train are indeed three 2x4 Yellow bricks!)
2) For the black truck there are also a 2x4 plate above the transclear 1x4, also missing in inventory
https://www.bricklink.com/message.asp?ID=1239757
|
For now, please do not process any inventory change request 080-1 and 080-2.
More evidence is surfaced and it is better I first go through them and double
check everything.
|
|
| Author: | SezaR | | Posted: | Jun 30, 2021 17:17 | | Subject: | Re: Inventory Change Request for Set 6950-1 | | Viewed: | 23 times | | Topic: | Inventories Requests | |
| In Inventories Requests, the_legoqueen writes:
| | Please make changes to the following inventory:
* Change 8 Part Black {3749 Technic, Axle 1 with Pin without Friction Ridges Lengthwise to 43093 Technic, Axle 1 with Pin with Friction Ridges Lengthwise} {match ID 0 to 150957}
Comments from Submitter:
Instruction booklet clearly has axle with friction ridges which fit into the wheels for this set
|
The part
was first designed and released in 2001-2002 but the set
is from 1982, 20 years before this part was released!
|
|
| Author: | SezaR | | Posted: | Jun 22, 2021 16:37 | | Subject: | Re: Inventory Change Request for Set 127-1 | | Viewed: | 20 times | | Topic: | Inventories Requests | |
| In Inventories Requests, pamoge writes:
| | Please make changes to the following inventory:
* Add 8 Part wheel1a Red Train Wheel with 2 x 2 Stud Center, Traction Teeth
Comments from Submitter:
It's quite confussing. Train appears on box pictures with spoked wheels only. Nevertheless, following builing instructions it should be 2x2 stud center wheels for the passanger train carriage as well as for postal services train carriage. The locomotive should have spoked wheels (with rims) and the battery holder spoked wheels. This is also the devirence with set 116. All train cars in the 116-set have 2x2 stud center wheels. Therefore, these sets are not similar.
Thus, wheel1a should be added to the 127-set inventory list (8 pieces) and wheel2b should be changed from 16 to 4 pieces for this inventory list. To my opinion, the statement that sets 116 and 127 are similar (but with different numbers should be deleted.
|
See
https://www.bricklink.com/messageThread.asp?ID=253906
The wheels
were not used/produced since 1969. See
https://www.bricklink.com/catalogItemIn.asp?P=wheel1a&in=S
The box art and the instructions were designed about the transition time from
to
so TLG did not bother to correct them just before the producing and releasing
them for sale.
For some trains released in that time, there were two versions of instructions.
For exmaple train
were in the market for many years (1968-1971?) and many parts were changed, specially
the black 4.5v motor so TLG bothered to change the instructions. See
https://www.bricklink.com/message.asp?ID=1252652
The funny thing is the image on the last page of the second version. The wheels
are first version (incorrectly)
but the instructions shows
|
|
| Author: | SezaR | | Posted: | Jun 22, 2021 06:02 | | Subject: | Re: New Complete or Used | | Viewed: | 31 times | | Topic: | Help | |
| In Help, gogogovro writes:
| | How would you list this set: New, Complete or Used?
I bought a set from another marketplace, it was complete with three bags, instructions,
stickers and box. Bag one was opened and the minidolls built (friends set) and
a few pieces put together, but mostly all apart in mint condition. Bags 2 and
3 are still sealed. Sticker sheet and instructions are in new condition. I verified
bag one is complete with instructions. So 3/4ths of the set is new and the other
I would normally classify as used.
|
used complete
https://store.bricklink.com/SezaR?itemID=236757360#/shop?o={%22invID%22:%22236757360%22}
http://img.bricklink.com/myImg/634673.jpg
|
|
| Author: | SezaR | | Posted: | Jun 22, 2021 03:41 | | Subject: | Re: We have a new Inventories Admin! | | Viewed: | 30 times | | Topic: | Catalog | |
| In Catalog, Admin_Russell writes:
| | Dear BrickLink members,
We are very pleased to announce that we are adding member Maggiec to the Community
Expert Program. She is being appointed as a BrickLink Inventories Administrator
and will be serving alongside current Inventories Admins Paulvdb and Turez.
|
Congradz Maggie!
| | For most of you, Maggie needs no introduction. She is a long-time member of the
site, and has served as a Catalog Administrator for 14 years. She has worked
with several well-known catalog administrators including Firefly and Therobo,
and also Dan Jezek himself.
https://www.bricklink.com/memberAdmins.asp
Most people will associate Maggie with the "catalog" side of the Catalog, but
she has also been active as a contributor on the "inventories" side over the
years as well. In fact, she logged the very first inventory change requests back
in June 2004:
https://www.bricklink.com/catalogInvChangeItem.asp?itemType=S&itemNo=4535-1&viewDate=Y&viewStatus=1
Maggie has been a stabilizing force during some very critical times for the BrickLink
site. And we are very pleased she is joining us now for this next journey, and
we feel she will be an excellent addition to our Catalog team.
Please join me in welcoming her! 
|
|
|
| Author: | SezaR | | Posted: | Jun 17, 2021 22:50 | | Subject: | Re: Samsonite Lego Question | | Viewed: | 70 times | | Topic: | General | |
| In General, axmpxl writes:
| | I have a Canadian Samsonite set that is sealed in cellophane. However it also
has box seals at both ends of the set. European sets wrapped in cellophane do
not have seals. Is this normal for Samsonite sets or is this odd? I've
attached a picture. There clearly are seals under the cellophane. Any help
clarifying this would be much appreciated.
|
E!!! item number:393219386763
Based on the other photos, this is not produced by Samsonite of Canada because:
- no French text such as "Jeu de construction" is printed on the box,
- Instead of "77 pieces", there is " 77 Interlocking pieces" printed,
- "Stratford, Ont. Canada" is not printed on the side of the box,
The Canadian boxes never had seals on the sides of the box. Small boxes were
not sealed, and for the bigger boxes, only the inner tray were wrapped with cellophane.
Attached are photos of Canadian boxed set
|
|
|
| Author: | SezaR | | Posted: | Jun 17, 2021 22:34 | | Subject: | Inventory Change Request for Set 7819-1 | | Viewed: | 18 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part BA274pb01L Red Stickered Assembly 3 x 2 x 2 with Mail Envelope Pattern Model Left Side (Sticker) - Set 7819 - 2 Brick 1 x 2, 1 Brick 1 x 3 (Counterpart)
* Add 1 Part BA274pb01R Red Stickered Assembly 3 x 2 x 2 with Mail Envelope Pattern Model Right Side (Sticker) - Set 7819 - 2 Brick 1 x 2, 1 Brick 1 x 3 (Counterpart)
|
|
| Author: | SezaR | | Posted: | Jun 17, 2021 22:33 | | Subject: | Inventory Change Request for Set 7750-1 | | Viewed: | 18 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part BA275pb01 Black Stickered Assembly 4 x 2 x 2 1/3 with '7750' Pattern (Sticker) - Set 7750 - 2 Slope, Inverted 45 2 x 2, 1 Plate 2 x 4, 1 Technic, Brick 1 x 2 with Hole (Counterpart)
|
| Author: | SezaR | | Posted: | Jun 17, 2021 22:32 | | Subject: | Inventory Change Request for Set 7710-1 | | Viewed: | 18 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part BA275pb02 Black Stickered Assembly 4 x 2 x 2 1/3 with '7710' Pattern (Sticker) - Set 7710 - 2 Slope, Inverted 45 2 x 2, 1 Plate 2 x 4, 1 Technic, Brick 1 x 2 with Hole (Counterpart)
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
)
)
)
)
