Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | jethroo  | | Posted: | Jan 17, 2021 07:43 | | Subject: | Inventory Change Request for Set 75980-1 | | Viewed: | 19 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 5 Part 63864pb133 Dark Tan Tile 1 x 3 with Wood Grain Pattern (Alternate) (match ID 1)
|
 |
| Author: | jethroo | | Posted: | Jan 10, 2021 12:08 | | Subject: | Inventory Change Request for Set 75934-1 | | Viewed: | 18 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 3068bpb1490 Green Tile 2 x 2 with Groove with 'Jurassic' and Velociraptor Breaking Through Wall on Green Background Pattern (Sticker) - Set 75934 (Counterpart)
* Add 1 Part 3068bpb1491 Red Tile 2 x 2 with Groove with Isla Nebular on Red Background Pattern (Sticker) - Set 75934 (Counterpart)
* Add 1 Part 3068bpb1492 Yellow Tile 2 x 2 with Groove with Dinosaur Shadow Play in Front of Landscape on Yellow Background Pattern (Sticker) - Set 75934 (Counterpart)
|
|
| Author: | jethroo | | Posted: | Dec 27, 2020 14:53 | | Subject: | Re: Inventory Change Request for Set 10277-1 | | Viewed: | 13 times | | Topic: | Inventories Requests | |
| In Inventories Requests, jethroo writes:
| | Please make changes to the following inventory:
* Add 4 Part 3070bpb180 Light Bluish Gray Tile 1 x 1 with Groove with White and Red Gauge and Thin Needle Pattern (Alternate) (match ID 1016992)
Comments from Submitter:
building this set right now from sealed box and I have 4x 3070bpb180 and 1x 3070bpb180 3070bp07 in mine
|
here is a photo proof of my set
|
|
|
| Author: | jethroo | | Posted: | Dec 27, 2020 14:51 | | Subject: | Inventory Change Request for Set 10277-1 | | Viewed: | 18 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 4 Part 3070bpb180 Light Bluish Gray Tile 1 x 1 with Groove with White and Red Gauge and Thin Needle Pattern (Alternate) (match ID 1016992)
Comments from Submitter:
building this set right now from sealed box and I have 4x 3070bpb180 and 1x 3070bpb180 3070bp07 in mine
|
|
| Author: | jethroo | | Posted: | Mar 21, 2020 11:04 | | Subject: | Inventory Change Request for Set 41126-1 | | Viewed: | 21 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 3245cpb115 White Brick 1 x 2 x 2 with Inside Stud Holder with Horseshoe, Horse and Grain in Bucket Pattern (Sticker) - Set 41126 (Counterpart)
* Add 1 Part 60581pb133 Tan Panel 1 x 4 x 3 with Side Supports - Hollow Studs with Horse Medical Supplies and Brushes Pattern on Inside (Sticker) - Set 41126 (Counterpart)
* Add 1 Part 63864pb099 White Tile 1 x 3 with Horseshoe and 'SPICE' Pattern (Sticker) - Set 41126 (Counterpart)
|
|
| Author: | jethroo | | Posted: | Jun 12, 2019 16:19 | | Subject: | Re: Inventory Change Request for Set 6971-1 | | Viewed: | 29 times | | Topic: | Inventories Requests | |
| In Inventories Requests, SezaR writes:
| | In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Add 1 Part 3942c White Cone 2 x 2 x 2 - Open Stud (Alternate) (match ID 5)
* Add 10 Part 4476b Blue Support 2 x 4 x 5 Stanchion Inclined, 5mm Wide Posts (match ID 6)
* Change 1 Part White 3942a Cone 2 x 2 x 2 - Solid Stud {match ID 0 to 5}
* Change 10 Part Blue 4476a Support 2 x 4 x 5 Stanchion Inclined, 3mm Wide Posts {match ID 0 to 6}
|
I contacted the submitted of this request in 2015
https://www.bricklink.com/messageThread.asp?ID=190393
He checked the parts. His copy should be from 1986 (or later?). Interesting that
the white cone is not 3942b but 3942c.
|
Can confirm that the provided infos and pics come from my set 
The cone with open stud can actually be seen as such in the instruction itself.
For the plate modified the box and instruction are showing the ones with the
thin ring but my set are containing the ones with the thick ring.
Best
Carsten
|
|
| Author: | jethroo | | Posted: | Jan 3, 2019 10:16 | | Subject: | Customizable Place Order Button | | Viewed: | 142 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
| As german seller in order to follow german law I want to be able to customize
the button displayed on the final checkout page (currently "Place Order") so
that it can be localized as needed by the shop owner.
Some background for emphasize the need (german only though sorry!): https://www.haendlerbund.de/de/downloads/whitepaper-button-loesung.pdf
This setting should be implemented in an optional way (when not defined default
BL text will be displayed). Furthermore a checkbox for displaying it to domestic
buyers only might be helpful.
To any other (german) seller: Please add to this idea / feature request so that
we can use BL again
sincerely
Carsten
|
|
| Author: | jethroo | | Posted: | Apr 8, 2018 12:19 | | Subject: | Inventory Change Request for Set 10246-1 | | Viewed: | 30 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 4 Part 3068bpb1105 White Tile 2 x 2 with 'THE LEGO NEWS' and 'The greatest hero ever!' Pattern (match ID 2)
* Change 4 Part White 3068bpb0431 Tile 2 x 2 with Newspaper 'THE LEGO NEWS', 'volume 3' and 'The greatest LEGO hero ever!' Pattern {match ID 0 to 2}
Comments from Submitter:
just building this from a sealed box and the sets comes with the alternate newspaper version
|
|
| Author: | jethroo | | Posted: | Mar 7, 2018 16:15 | | Subject: | Re: Separate professional and private sellers | | Viewed: | 46 times | | Topic: | Suggestions | |
| In Suggestions, Teup writes:
| | In Suggestions, jethroo writes:
| | In Suggestions, Teup writes:
| | I have no real personal reason to be posting this suggestion and haven't
thought about what it would mean for my own business, but just something I want
to throw out there as I've been thinking about it for a while.
Why not separate professional sellers and private sellers? I mean with an icon,
a label, a colour, something like that. Right now there are private persons just
getting rid of some old parts they aren't using, and online stores that use
Bricklink as their platform. An entirely different world in every aspect, but
they will show up in exactly the same way.
For years and years there's this eternal clash going on between buyers and
sellers and it seems like they sometimes speak different languages when the buyers
demand "their rights" and the seller has no idea what they're talking about.
Much if not most of the grief going on on Bricklink may be caused by buyers buying
from private sellers and expecting business service. The main example I can think
of now is about whose problem it is when a package is lost, but also tax and
refund issues get confusing if it's unclear whether we're talking about
two people trading or about consumer rights.
So how about labels for private sellers and professional sellers?
|
there is already this lovely brick next to the username
|
That's feedback and it's unrelated  There are businesses with low feedback
scores and hobbyists with high scores. It doesn't tell you anything about
the legal form of the transaction.
|
Is "legal form of the transaction" relevant if the seller selected the finest
used bricks, having them well packaged and shipped to the customer?
In Germany legaly wise its actually no matter of size as well, if you have the
intention to gain money by selling goods (on long term) you have a business,
period.
I would rather condsider me hobby seller as well (although legaly registered
and paying my taxes). I had to learn quite few a things and would consider my
service way better than 500+ ratings and 5 years ago.
The point was that the ratings can give you an insight of how much the other
guy is into the lego selling/buying thing as well. And even if it is just a hundred
of buying ratings, still the idea of how a good order has to look like is more
established than it might be with 0-20 rating (I said might, so there are definitly
sellers doing a great job within this range)
Best
Carsten
|
|
| Author: | jethroo | | Posted: | Mar 7, 2018 04:46 | | Subject: | Re: Separate professional and private sellers | | Viewed: | 118 times | | Topic: | Suggestions | |
| In Suggestions, Teup writes:
| | I have no real personal reason to be posting this suggestion and haven't
thought about what it would mean for my own business, but just something I want
to throw out there as I've been thinking about it for a while.
Why not separate professional sellers and private sellers? I mean with an icon,
a label, a colour, something like that. Right now there are private persons just
getting rid of some old parts they aren't using, and online stores that use
Bricklink as their platform. An entirely different world in every aspect, but
they will show up in exactly the same way.
For years and years there's this eternal clash going on between buyers and
sellers and it seems like they sometimes speak different languages when the buyers
demand "their rights" and the seller has no idea what they're talking about.
Much if not most of the grief going on on Bricklink may be caused by buyers buying
from private sellers and expecting business service. The main example I can think
of now is about whose problem it is when a package is lost, but also tax and
refund issues get confusing if it's unclear whether we're talking about
two people trading or about consumer rights.
So how about labels for private sellers and professional sellers?
|
there is already this lovely brick next to the username
|
|
| Author: | jethroo | | Posted: | Jun 21, 2015 16:28 | | Subject: | Inventory Change Request for Set 6971-1 | | Viewed: | 21 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 4276 Black Hinge Plate 1 x 2 with 2 Fingers (Alternate) (match ID 223708 )
* Add 2 Part 4275 Black Hinge Plate 1 x 2 with 3 Fingers (Alternate) (match ID 223707 )
Comments from Submitter:
My Grandparents gifted me this set they bought nearly 30 years ago (the only bought 3 sets, castle 375, this and a Fabuland set) and My 6971 comes with hinges having hollow studs.
|
|
| Author: | jethroo | | Posted: | Feb 6, 2012 18:48 | | Subject: | Re: Way to make stores crazy fee settings easy | | Viewed: | 26 times | | Topic: | Suggestions | |
| In Suggestions, Tsitra writes:
| | In Suggestions, schlectus writes:
| | Hahaha, sweet...thanks!! 
I wanted my store to be the easiest thing to navigate for buyers that are new
to Bricklink. So far, it seems to be working pretty well.
I don't want this to be a slam on sellers that charge a fee (I used to do it
myself) for packaging, gas, printer ink, paper, etc...and I totally don't begrudge
paying those fees to sellers on things I buy when they list it up front in their
terms. But it did occur to me when I was at Target one day, that if the cashier
looked at me and said "I need to charge you a few extra dollars to pay for these
plastic bags and my gas getting here"...well, that would have seemed a bit odd.
I just decided that I don't want to do that to my customers.
Shipping supplies are cheap for me. I buy enough on Ebay, that this is where
my Ebay Bucks go to: padded envelopes. I also work at airport (for now), so
driving to a post office isn't an issue...we have one on site.
Like I said, I don't begrudge sellers at all when they charge a reasonable fee...I
think I'm just fortunate enough to not have to.
|
Be careful what you say, Target in Australia already charges for plastic bags
(about 20c each I think), they say it is to stop people using them to cut down
on the environmental impact, but it is most likely just money grabbing.
Paul
|
Hi Paul,
we also have to pay for plastic bags in the super market and yes it makes
me to reuse bags (just grapping some if i head for the weekly shopping spree,
a wife and two childs have to be fed ^^) and if they are to used they end as
garbage bags
and the usal bags are from recycled plastic stuff already *g*
regards
Carsten
|
|
| Author: | jethroo | | Posted: | Jan 30, 2012 08:26 | | Subject: | Re: Help Page Needed: Buying: Reserved Item | | Viewed: | 28 times | | Topic: | Suggestions | |
| In Suggestions, picabo writes:
| | In Suggestions, jethroo writes:
| | In Suggestions, dearlydeparted writes:
| | Hello,
This may exist, but after doing several searches in the Help menu with different
key words, concerning buyer reserved items, nothing comes up for the buyer. Any
reference is for "adding" reserved items.
It has been 100% consistent that new members can not find any instructional information
on where to find items reserved for them or how to add them to their order. I
have always had to send an email, after getting an inquiry, on how to find the
items I've reserved for them and how to add them to their order. I remember when
I was new and had the same issue, having to contact the seller on how to do it.
Can we add a Help page under "Buying" with header "How to purchase Items Reserved
for me" - or something to that effect.
thanks,
Judy
|
the way it works now is not quite intuitive for both buyer and seller side. i
had questions on 2 reserved items from buyers with 500+ feedback on how to find
their reserved items, so they have been quite here for a while
for the seller who want's to check if he has marked the items correctly for his
store a possibility to check it directly in the store would also be nice
|
Go to My Inventory. Right-hand side. Reserved for private sale. This will show
if you have any items reserved.
Pam
|
hi pam,
yes i know this already
it's rather about checking it from the buyers perspective through the store,
so if my settings in the inventory are reflected correctly in my store
regards
Carsten
|
|
| Author: | jethroo | | Posted: | Jan 30, 2012 07:29 | | Subject: | Re: Help Page Needed: Buying: Reserved Item | | Viewed: | 31 times | | Topic: | Suggestions | |
| In Suggestions, dearlydeparted writes:
| | Hello,
This may exist, but after doing several searches in the Help menu with different
key words, concerning buyer reserved items, nothing comes up for the buyer. Any
reference is for "adding" reserved items.
It has been 100% consistent that new members can not find any instructional information
on where to find items reserved for them or how to add them to their order. I
have always had to send an email, after getting an inquiry, on how to find the
items I've reserved for them and how to add them to their order. I remember when
I was new and had the same issue, having to contact the seller on how to do it.
Can we add a Help page under "Buying" with header "How to purchase Items Reserved
for me" - or something to that effect.
thanks,
Judy
|
the way it works now is not quite intuitive for both buyer and seller side. i
had questions on 2 reserved items from buyers with 500+ feedback on how to find
their reserved items, so they have been quite here for a while
for the seller who want's to check if he has marked the items correctly for his
store a possibility to check it directly in the store would also be nice
|
|
| Author: | jethroo | | Posted: | Jan 13, 2012 08:30 | | Subject: | Re: Search by rarity | | Viewed: | 33 times | | Topic: | Suggestions | |
| In Suggestions, FigBits writes:
| | In Suggestions, jethroo writes:
| | In Suggestions, Master_Jedi_Rob writes:
| | I would like to be able to search a store by rarity of number available. Then,
I could get the least common parts a store has to offer.
Opinions?
-R
|
mhm i don't really like this idea, because the market of rare items can be cornered
by one seller at ease then. on this position the seller can try to dictate the
price as he like it cause he is the only one offering these parts.
|
I'm not sure I understand. Sellers are already able to do that. (I suppose that
the suggestion would make it easier for sellers to notice they have rare parts
if they are unaware.)
--
Marc.
|
yes the can do this on limited basis yet, but it requires some experience and
afford to do this. i think with this function it would kind of to easy.
|
|
| Author: | jethroo | | Posted: | Jan 13, 2012 07:49 | | Subject: | Re: Search by rarity | | Viewed: | 30 times | | Topic: | Suggestions | |
| In Suggestions, Master_Jedi_Rob writes:
| | I would like to be able to search a store by rarity of number available. Then,
I could get the least common parts a store has to offer.
Opinions?
-R
|
mhm i don't really like this idea, because the market of rare items can be cornered
by one seller at ease then. on this position the seller can try to dictate the
price as he like it cause he is the only one offering these parts. this will
raise prices for the collectors who need this special part for completing a set
without any reason and may force them to look for the item on alternative sites
(BL looses orders).
my 2 cents summary
regards
carsten
|
|
| Author: | jethroo | | Posted: | Nov 10, 2011 18:46 | | Subject: | Re: Add option to Exclude Paypal for EU | | Viewed: | 80 times | | Topic: | Suggestions | |
| In Suggestions, Daave writes:
| | Why on earth do you need to do that?
In Suggestions, Brickwilbo writes:
| | The BL accepted payment method settings has two options:
1. "Within My Country I Accept Payment By"
2. "Internationally I Accept Payment By"
Please add the possibility to exclude Paypal for EU as accepted method.
Perhaps with the methods "Paypal (EU)" and "Paypal (Worldwide)".
|
|
Because in the EU you can easily pay with bank transfer with the same costs as
if you would make a bank transfer in your country, in most cases this is just
0.00 EUR, this is somethere defined by EU law if i'm right.
brickwilbo just make a comment on your IBAN payment option, that this is your
preferred EU payment method. this will not stop buyers to be able to use paypal
as payment method but actually my last orders from netherland and finland all
used IBAN instead of paypal.
|
|
| Author: | jethroo | | Posted: | Nov 3, 2011 19:25 | | Subject: | Extended Order Details for printing Invoice | | Viewed: | 100 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
| Hi everybody,
it would be really cool, if one could print an invoice directly from the BL-System.
Sure you have the order details and a reduced view for printing mode (as implicated
by the printer icon) but at least for my needs it really does not do well.
so it would be cool if:
- the details for the printing view could also be specified by settings to match
the personal needs just like one can choose to display weight, items left etc.
in the order details view
- all parameters which are needed for a commercial invoice are included in the
print view
- alterativly the buyers/sellers messages could be hide by option on the order
detail field
- one could use templates to allow the seller to bring in his own design filled
with predefined variables such as we know them from the invoice system
Enabling a seller to print a commercial invoice with one click directly from
BL would make things easier for the seller regardless if he has to print a commercial
invoice for international orders to be attached to the mail/package or if he
just want to have the invoice for himself concerning taxes or something.
thx for looking at this suggestion
Carsten
|
|
| Author: | jethroo | | Posted: | Oct 8, 2011 17:59 | | Subject: | Re: Another problem order category | | Viewed: | 38 times | | Topic: | Suggestions | |
| it can even be a loss to the buyer who has selected the seller because he as
all the bricks needed thus minimizing shipping costs because they have only to
be paid once and the needed parts have not to be split to several orders.
thats why i offer buyers the option to cancel the order in any case an item ordered
is not available (other color: light gray vs light bluish gray or quantity) because
they may have selected my store because i'm the only one with all of there needed
parts which saves them money on shipment.
I also have used order change requests but these work somewhat slowly because
the buyer sometimes doesn't react on that and is still waiting for me to invoice
(had that a couple of times). Instead a credit on the order and short info text
works better for me.
|
|
| Author: | jethroo | | Posted: | Sep 2, 2011 18:13 | | Subject: | Re: Checkboxes for mandatory items in wanted list | | Viewed: | 23 times | | Topic: | Suggestions | |
| In Suggestions, cptnruthless writes:
| | In Suggestions, jethroo writes:
| |
thx for this great advice, but as a tried this out instantly i realized that
this only works for items in one category, if i want to do this for parts, minifigs
and instructions simultaneous there is no "show all" link/button which covers
all categories :/ (or maybe i am to blind to see ^^)
|
Yes that is the only limitation I know of.
Perhaps admin might consider this an easier change than your original suggestion?
-Ruth
|
an easier change it would be indeed i would appreciate that! do u think i should
open a new suggestion or just leave this one opened?
|
|
| Author: | jethroo | | Posted: | Sep 2, 2011 17:56 | | Subject: | Re: Checkboxes for mandatory items in wanted list | | Viewed: | 22 times | | Topic: | Suggestions | |
| In Suggestions, cptnruthless writes:
| | In Suggestions, jethroo writes:
| | In Suggestions, cptnruthless writes:
| | In Suggestions, jethroo writes:
| | I know that one can have maybe 2 wanted lists: one for the mandatory and one
for the "optional" items but if you have a couple of sets missing items this
is really cumbersome.
|
What is cumbersome about having 2 wanted lists? (trying to understand the suggestion)
|
thats right 2 lists for one set (i prefere to have an own wanted list for each
set which i manage in separate files in brickstore, a wanted list for each set
simply allows me to complete one set faster) but what about 20 sets with missing
parts, that would be 40 lists instead
|
Ah okay now I understand. Here's how I solve the problem:
Wanted list A with 20 parts. I visit the list by selecting it in the dropdown,
click "show all", then use the "query by store" checkbox for the parts I most
want in the list, that HAVE to be there in order for me to place an order.
|
thx for this great advice, but as a tried this out instantly i realized that
this only works for items in one category, if i want to do this for parts, minifigs
and instructions simultaneous there is no "show all" link/button which covers
all categories :/ (or maybe i am to blind to see ^^)
| | So say I select 5 out of the 20 parts. Then when I hit the submit button, it
shows me the by shop screen with the sellers who have the most lots(unique) off
of my list. I choose the ones that have the most (5/5, 4/5) and compare those
ones first, and then from within the specific store, I can look for the other
items on the wanted list as well.
Conversely if you want to look for all 20, then just go to the by shop page and
select only that wanted list.
Hope that makes sense and helps you find what you're looking for!
-Ruth
|
|
|
| Author: | jethroo | | Posted: | Sep 2, 2011 17:35 | | Subject: | Re: Checkboxes for mandatory items in wanted list | | Viewed: | 18 times | | Topic: | Suggestions | |
| In Suggestions, Brickwilbo writes:
| | In Suggestions, jethroo writes:
| | In Suggestions, cptnruthless writes:
| | In Suggestions, jethroo writes:
| | I know that one can have maybe 2 wanted lists: one for the mandatory and one
for the "optional" items but if you have a couple of sets missing items this
is really cumbersome.
|
What is cumbersome about having 2 wanted lists? (trying to understand the suggestion)
|
thats right 2 lists for one set (i prefere to have an own wanted list for each
set which i manage in separate files in brickstore, a wanted list for each set
simply allows me to complete one set faster) but what about 20 sets with missing
parts, that would be 40 lists instead
|
I enter the setnumber in the remarksfield of the mandatory wantlist.
|
ok thanks for this advice, i will give it a try. so 1 mandatory list and then
the set lists
but this is still not reflecting the suggested behavior: "today i want to complete
the essential elemenents on set lets check this out on bricklink with my
mandatory list" - shops with unique lots on that list but my set parts
are not guaranteed to be included or sorted to be at pole positions
sorry for protecting my idea but i still think that it would be a usefull function
to bring buyer and seller together more easily with moderate implementation effort
(one checkbox for items on the wanted list and a new filter for the "by shop"
function utilizing the checkbox value)
|
|
| Author: | jethroo | | Posted: | Sep 2, 2011 16:29 | | Subject: | Re: Checkboxes for mandatory items in wanted list | | Viewed: | 22 times | | Topic: | Suggestions | |
| In Suggestions, cptnruthless writes:
| | In Suggestions, jethroo writes:
| | I know that one can have maybe 2 wanted lists: one for the mandatory and one
for the "optional" items but if you have a couple of sets missing items this
is really cumbersome.
|
What is cumbersome about having 2 wanted lists? (trying to understand the suggestion)
|
thats right 2 lists for one set (i prefere to have an own wanted list for each
set which i manage in separate files in brickstore, a wanted list for each set
simply allows me to complete one set faster) but what about 20 sets with missing
parts, that would be 40 lists instead
|
|
| Author: | jethroo | | Posted: | Sep 2, 2011 15:36 | | Subject: | Checkboxes for mandatory items in wanted list | | Viewed: | 90 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
| Hi there,
i want to suggest a function regarding wanted lists and the way they work with
the "by shop" function. if i use the show wanted items by shop function sorted
by unique lots in most cases i'm searching the resulting shops just to find out
that a couple of the mandatory items i really wanted to have included in an order
for that wanted list are missing.
Example: Fictive Wanted List with 100 Lots (10 of them are mandatory for completing
the build.
Fictive "by Shop" Result
SHOP A(1798) Canada 66 (59) 5,755 ~EUR 1.76
SHOP B(5445) USA 98 (54) 30,293 ~EUR 105.73
SHOP C(6018) USA 81 (54) 42,349 ~EUR 5.64
SHOP D(3334) Canada 190 (54)13,661 ~EUR 2.11
Fictive manuel Search Result in the Shops:
SHOP A: 59 Lots i need only 7 of my mandatory lots
SHOP B: 54 Lots i need only 2 of my mandatory lots
SHOP C: 54 Lots i need only 5 of my mandatory lots
SHOP D: 54 Lots i need only 8 of my mandatory lots
If there would be checkboxes for the items on my wanted list which would mark
this lot as mandatory for the "by shop" function and an additional sort option
"sort by mandatory lots" would be included this would be a really timesaving
issue.
I know that one can have maybe 2 wanted lists: one for the mandatory and one
for the "optional" items but if you have a couple of sets missing items this
is really cumbersome.
|
|
|
