BrickLink Discussion Forum

In Inventories, Legobuying84 writes:

Now that Lego owns bricklink can I request this set be inventoried and it will
get done? I’m wanting to part out 5-10 of them and have been checking for months
but it hasn’t been inventoried. I don’t know if I need to offer someone $20 to
inventory it or what to do so that’s why I’m here posting

All finished! The admins approved in less than 12 hours by the way.

Good luck with the part out! There are lots of great parts in this set.

Jen

75936-1 (Inv) Jurassic Park: T. rex Rampage
3096 Parts, 6 Minifigures, 2019
Sets: Jurassic World: Jurassic Park

Author:

jennnifer

Posted:

Mar 18, 2020 10:45

Subject:

Re: Decorated categories

Viewed:

33 times

Topic:

In Suggestions, athornberg writes:

Replace "decorated" categories with 2 new categories, "printed" and "with stickers".

You can achieve much the same thing by searching -sticker in the decorated category.

Jen

Author:

jennnifer

Posted:

Mar 16, 2020 11:57

Subject:

Re: Will someone inventoryJurassic park 75936 set

Viewed:

49 times

Topic:

In Inventories, Legobuying84 writes:

that one of the requirements would be to make sure inventories are always done.

But anyways all I’m asking for is if someone had time and wanted $20 to do it
then great. If no one wants to do it then I would offer 30$ etc. That being said
even if you do it and I pay you there is no guarantee the admin staff will even
approve it. That’s just the risk I have to take.

?? There is no risk whatsoever. Admin approve all set inventories that are correct.
And they help submitters to make an inventory correct. I am not sure where you
are coming from in all this. Give me a couple days to complete the inventory
and you will see that the system works just fine.

Jen

Author:

jennnifer

Posted:

Mar 16, 2020 10:22

Subject:

Re: Will someone inventoryJurassic park 75936 set

Viewed:

65 times

Topic:

In Inventories, Legobuying84 writes:

In Inventories, axaday writes:

It sounds like Jenn may be doing it. If not, I would take the $100 bounty. It
would take me a week. I don’t have a local Lego store.

In Inventories, Legobuying84 writes:

In Inventories, Admin_Russell writes:

In Inventories, Legobuying84 writes:

In Inventories, jennnifer writes:

In Inventories, Legobuying84 writes:

Funny, I have this set in a sealed box just right here staring at me. Guess I
could dust off some cobwebs on my inventory skills...

Jen

I figured by now it would be pretty instant for inventories to get listed with
lego now owning this site. I’m hoping this site isn’t still using volunteers
to do inventory

I wondering what your thought process is on this subject. What does the recent
acquisition have to do with the speed at which inventories are completed on BrickLink?

My thought process is that the Lego Group owns bricklink and could potentially
instantly upload all inventories of sets that are released. You from what I understand
are now employed by Lego so I assume you would know more about what the capabilities
are.

But maybe it’s just going to take some cash to fix the situation. Maybe I need
to offer 40$ or 100$ for someone to inventory the set. You can call it a side
job or a bounty or something along those lines. I had thought that the Lego group
would have helped in this area but I guess inventories still rely on volunteers.
I really have no clue but I’m willing to pay someone to do it if someone wants
to make some cash.

Well I would obviously see what’s the lowest price I can get it done for. Hopefully
20$ or 40$. Even still I realize that I would have to wait for an admin to approve
it. I’m just trying to help myself and the community. I’m
Not looking for a debate or argument

Sorry you feel so negative about all this. Our system works with volunteers and
the LEGO group could not provide all the necessary info for a good inventory.
Just look at the differences between our inventories and Brickset's if you
need some examples. No pattern names, no minifigs, no part variations, no sticker
sheets, no extras. Anyway, you posted that you needed an inventory and someone
offered to do it. How bad can things be?

Take care,
Jen

Author:

jennnifer

Posted:

Mar 15, 2020 13:08

Subject:

Re: Will someone inventoryJurassic park 75936 set

Viewed:

73 times

Topic:

In Inventories, Legobuying84 writes:

Funny, I have this set in a sealed box just right here staring at me. Guess I
could dust off some cobwebs on my inventory skills...

Jen

Author:

jennnifer

Posted:

Feb 7, 2020 15:10

Subject:

Re: February Roadmap Project: Old and New

Viewed:

82 times

Topic:

Sure! I'll play along...

I am not convinced that 90460 is really a new version of 6131.

90460 Minifigure, Headgear Hat, Wizard / Witch, Slightly Textured
Parts: Minifigure, Headgear

6131 Minifigure, Headgear Hat, Wizard / Witch
Parts: Minifigure, Headgear

They look the same and LEGO uses the same thumbnail image for both. The small
image in Dark Green that I submitted for 90460 was back in the days before I
knew what I was doing. I cannot confirm the part number or what set it was from.
(I guess we all start somewhere!)

Anyway, I would like to see convincing side by side proof that they are significantly
different even if they have different mold numbers. I have not found any molded
with 90460. My Witch from Series 2 has been played with so I cannot confirm it
there either.

I am open to hearing any ideas or missing information about this!
Thanks,
Jen

Author:

jennnifer

Posted:

Feb 3, 2020 18:36

Subject:

Re: We have a new Catalog Associate!

Viewed:

86 times

Topic:

A very warm Welcome Back! I look forward to many pleasant discussions, disagreements,
and collaborations.

Jen

Author:

jennnifer

Posted:

Feb 2, 2020 11:04

Subject:

Re: Feature which shows if BL member is active

Viewed:

45 times

Topic:

In Suggestions, yapke writes:

Hello,

I was wondering if a feature or timer, to see whether a BrickLink
member is active or has been active (like on FB messenger or WhatsApp), would
be a great idea.

The reason why I'm wondering:
I'm sure there are members who logs in daily to see if another
member has reacted to their order('s invoice)/message, and are nervously
waiting until he/she/they react(s).

It will also be handy to see if a member (who placed an order on your store)
is active on BL and isn't responding to your multiple messages (or just ignoring),
and easier to decide to cancel an order.

For example (my example):
There is a member (USA) who has placed an order on my store (Belgium) a few days
ago. I instantly filled in and sent the invoice to serve him and be able to send
the parcel (after payment) as quickly as possible. But until now, two days later,
he hasn't read the message nor has paid for the order. Now I'm just wondering
if he was active or not lately... cause the hole situation is making me nervous.
I know I should be patient... but I find it kind of weird he responded very quickly
to my last call for buying, and afterwards not responding anymore.

So if you recognize yourself in such a situation, maybe vote 'YES' and
perhaps selling on BL will be more pleasant and more serious. I'm sure there
is a lot of members thinking this way, isn't it?

Kindly greetings,

Yapke

Yes, we used to have the ability to see when a buyer had last logged on. This
feature was just removed last month due to 'privacy' issues. It's
unfortunate as it was a valuable tool for sellers. Hopefully, they find a way
to restore it soon.

Jen

Author:

jennnifer

Posted:

Jan 26, 2020 00:25

Subject:

Re: Have A Heart

Viewed:

58 times

Topic:

In General, randyf writes:

I will definitely be looking into Azul and Wingspan. We are always looking for
other great games to add to our pool to choose from. Thanks for the suggestions!

Cheers,
Randy

Another vote here for Azul and Wingspan. We also play a lot of Scythe, Terraforming
Mars, and Tapestry recently.

Carcassone, Agricola, and Belfort are my all time favorites. I can't play
Catan... dice don't like me.

Jen

Author:

jennnifer

Posted:

Jan 15, 2020 10:42

Subject:

Re: Multipacks as one inventory item?

Viewed:

30 times

Topic:

In Catalog, chetzler writes:

Any possibility we could get a "break multipacks into parts" option on the part
out screen? Sort of like the "Break Sets in Sets" option that currently exists
and is very useful for things like Advent calendars.

That would be ideal but would require actual programming to put into place. Any
programmers work at this website?? Oh, never mind.

Jen

Author:

jennnifer

Posted:

Jan 12, 2020 13:31

Subject:

Re: Set 75248 Inventory Awareness

Viewed:

63 times

Topic:

In Inventories, 62Bricks writes:

Bricklink set inventories are not based on the building instructions at all.

The printed parts list is the only thing that matters. It is a widespread misunderstanding
that the regular section of the inventory lists the parts needed to complete
the set according to the instructions.

Wow, this is a pretty bold incorrect assertion. I was an inventory admin for
three years. The building instructions are the ultimate source for accurate inventories.
Not every set follows every rule, but that is where everything starts.

Jen

Author:

jennnifer

Posted:

Dec 16, 2019 23:02

Subject:

Re: Inventory Change Request for Minifig sw1030

Viewed:

28 times

Topic:

In Inventories Requests, randyf writes:

Like I said before, the system *as it is* handles the overwhelming majority of
figures with absolutely no problems (I would put it at greater than 95% for sure).
I don't see why we need to tear down the entire structure and begin from
scratch on creating a system that MAY include 100% of figures when the *massive*
amount of work required for this from a *volunteer* team would far outweigh any
added benefits of making the last few percentage points of figures fit into said
system. The math just does not make sense.

Cheers,
Randy

I am totally with you here Randy. Our system isn't perfect, but it is stable,
and LEGO makes constant changes so not everything fits exactly. Of course there
is always room for improvement, but system-wide changes are not necessarily needed
to correct small historical inconsistencies. It is very disruptive for sellers
to have listings, categories, and inventories updated.

Just my two cents as a seller and contributor. Thanks to all who help maintain
and improve the unique resource we have here!

Jen

Author:

jennnifer

Posted:

Nov 8, 2019 09:36

Subject:

Re: Forum Reforms

Viewed:

46 times

Topic:

In Suggestions, bje writes:

The captain has therefor cordially invited you to dine at the ship's main
table once it is upright and our onboard chef can manage to cook you dodo a la
efof.

Regards

Paid for by Pals Tours

Excellent.

You brightened my morning considerably.

Jen

Author:

jennnifer

Posted:

Nov 8, 2019 01:13

Subject:

Re: Forum Reforms

Viewed:

73 times

Topic:

In Suggestions, Nathan123 writes:

It seems the forum isn't getting the same kind of community involvement as
it once did. It is fairly common to see less than 100 messages per day and I
had to go back to July to find a day that had over 200.

I love the way this old Forum works. Sorry if I am in the minority. I would argue
that the lack of community involvement is directly related to the management's
antipathy.

Jen

Author:

jennnifer

Posted:

Oct 16, 2019 09:45

Subject:

Re: ADD NEW MINIFIG

Viewed:

56 times

Topic:

In Inventories, StoreToys4Boys writes:

30 minutes i'm trying to add a new minifig and can't do it.
I want to create a new one ans start in the reserve minifig and got the answer
"Item Not Found in Catalog "

I understand why people get discourage by adding stuff.

Instructions to add are done really in general and find nothing to help.

I'm giving up .

That's too bad. The catalog Add or Change pages are very specific out of
necessity. If you are trying to reserve an item, you are already to the inventory
section. All you need to do to add a new minifig is go to the Catalog Add or
Change tab and then click Add Item: -Minifig. Then, it gets much more complicated!
People here will answer questions so don't struggle with any one step too
long.

Good luck,
Jen

Author:

jennnifer

Posted:

Sep 13, 2019 09:33

Subject:

Re: We have a new Catalog Associate!

Viewed:

151 times

Topic:

In Catalog, Admin_Russell writes:

...you will notice a sea of green, followed by a sea of blue, followed by another
sea of green. This means he continued to contribute to the catalog after having
once been an admin, which is (unfortunately) something rather uncommon. But it
demonstrates a great and correct attitude, the kind of attitude we wish to model
for all of our other contributors out there, especially the ones still cutting
their teeth.

Sorry, but I must say that I take offense at this statement. You are passing
judgement on the previous admins and their reasons for leaving the site. You
are implying that the 'correct' attitude would be to maintain one's
dedication to a site even after you may have had a bad experience.
You don't know how they were treated by the management and members of this
site.

Jen

Author:

jennnifer

Posted:

Aug 12, 2019 09:45

Subject:

Re: having trouble clicking on pictures of items

Viewed:

32 times

Topic:

https://www.bricklink.com/message.asp?ID=1152248

In Catalog, jjoosephhh writes:

when i try to click on a image to look at it and know what characters are in
the set it doesn't allow me to.. Does anyone else have this problem?? more
context images in the catalog or thumbnail

Author:

jennnifer

Posted:

Aug 9, 2019 18:12

Subject:

Re: Why can't I enlarge pics anymore?

Viewed:

45 times

Topic:

In Catalog, calsbricks writes:

Tried it here on w7 ie11 - no problems whatsoever. Sounds like it could be womething
at your end. Which broiwsers have you tried?

I get no large (pop up) images on Windows 7 with IE11. The thumbnail images are
no longer live links.

Jen

Author:

jennnifer

Posted:

Aug 9, 2019 18:05

Subject:

Re: Why can't I enlarge pics anymore?

Viewed:

45 times

Topic:

In Catalog, firestar246 writes:

So you used to be able to click on the picture of a piece in the catalog, sort
of a quick view. You'd see the years it was made, any sets/minifigures the
piece was in, etc. You all know what I'm talking about. Well, a few days
ago I couldn't do it anymore. I've tried three different devices.

Why would they make such a horrible change for? I rely on that heavily when listing
minifigure parts to make sure I have the correct listing. This is going to make
this job twice as long now.

I have the same bug. It is not just you. Windows 7: Firefox, Chrome, etc. Logged
in, logged out, doesn't matter.

Jen

Author:

jennnifer

Posted:

Jul 30, 2019 00:08

Subject:

Re: Pattern spelt wrong

Viewed:

46 times

Topic:

In Catalog, talltim writes:

https://www.bricklink.com/v2/catalog/catalogitem.page?P=35787pb003 has pattern
spelt as patern in name

Tim

This struck me as funny as 'spelt' looks like it is spelled wrong to
me.

Had to look it up...
Jen

Author:

jennnifer

Posted:

Jul 1, 2019 11:21

Subject:

Re: 10205 : Parts to be removed from Inventory

Viewed:

56 times

Topic:

In Inventories, Sango85 writes:

Hello,
I check my locomotive 10205 with Bricklink Inventory and I found differences...
I bought a new loco, and found the same differences...
I think there are errors into the Bricklink Inventory.
Please find the list of the issues.
Best regards,
Julien

You might want to try explaining exactly what the 'differences' are.
Your list is not descriptive enough. If you are confident of your corrections,
you should file a change request for the inventory here:

https://www.bricklink.com/catalogAdd.asp?utm_content=subnav

Good luck,
Jen

Author:

jennnifer

Posted:

Jun 2, 2019 14:32

Subject:

Re: Inventory Change Request for Set 70657-1

Viewed:

22 times

Topic:

In Inventories Requests, randyf writes:

Multiple video reviews of the set show the Reddish Brown versions, which were
probably included in earlier releases of the set.

Cheers,
Randy

Thanks for checking!

Jen

Author:

jennnifer

Posted:

Jun 2, 2019 13:42

Subject:

Inventory Change Request for Set 70657-1

Viewed:

30 times

Topic:

Inventories Requests (Entry)

Status:

Open

Please make changes to the following inventory:

70657-1 (Inv) NINJAGO City Docks
3494 Parts, 14 Minifigures, 2018
Sets: The LEGO NINJAGO Movie

* Add 1 Part 61287pb006 Dark Tan Cylinder Hemisphere 2 x 2 with Cutout with Europe, Africa, Asia, Australia Dark Brown Globe Pattern (Alternate) (match ID 2)
* Add 1 Part 61287pb005 Dark Tan Cylinder Hemisphere 2 x 2 with Cutout with the Americas and South Pacific Dark Brown Globe Pattern (Alternate) (match ID 3)
* Add 1 Part 61287c01pb04 Dark Tan Cylinder Hemisphere 2 x 2 with Dark Brown Globe Pattern (Counterpart)
* Change 1 Part Dark Tan 61287pb002 Cylinder Hemisphere 2 x 2 with Cutout with Europe, Africa, Asia, Australia Reddish Brown Globe Pattern {match ID 0 to 2}
* Change 1 Part Dark Tan 61287pb001 Cylinder Hemisphere 2 x 2 with Cutout with the Americas and South Pacific Reddish Brown Globe Pattern {match ID 0 to 3}

Comments from Submitter:
Adding as an alternate but the original inventory should probably be reconfirmed.

Author:

jennnifer

Posted:

Apr 17, 2019 09:29

Subject:

Re: Lengths in “L” and 18654

Viewed:

32 times

Topic:

In Catalog, randyf writes:

My point was that if you categorize it as a bushing, you don't need to worry
about the length of it at all. You don't see the axle bushing above listed
as a "Technic Bush 1L". It is just "Technic Bush". So change that one to "Technic
Axle Bush" and

18654 Technic, Liftarm Thick 1 x 1 (Spacer)
Parts: Technic, Liftarm

to "Technic Pin Bush" and problem solved. No need to worry about the length at
all. Like I said, it doesn't and can't connect pins or axles at all,
so it is definitely *not* a "Technic, Pin Connector". And that's a fact.

I submitted changes along this train of thought long ago but they were not approved.
It is a 1x1 Liftarm in actuality but functions only as a bushing. I support moving
it to a more appropriate category.

Jen

Author:

jennnifer

Posted:

Mar 22, 2019 09:37

Subject:

Re: Inventory Change Request for Set 70840-1

Viewed:

25 times

Topic:

Author:

jennnifer

Posted:

Mar 19, 2019 09:53

Subject:

Re: 1st time i've inventoried a minifig - help!

Viewed:

44 times

Topic:

In Catalog, slave2lego writes:

Hi, i'm trying to inventory a minifig (sc074) but the inventory page only
has 1 line and I cant work out how to add extra lines for each of the parts?

Also can somone breakdown the torso numbering convention as well?

Standard torsos all start with:

973 (base part number used here on BrickLink)
pb (abbreviation for a part with a decoration)
xxxx (current number available)
c (abbreviation for a part that is an assembly)
01 (current number available for this assembly)

So, a completely new torso will be: 973pbxxxxc01

To find the next available number, do a Catalog (NOT All Items) search for 973pb*
then sort by Date, Order: Down

https://www.bricklink.com/catalogList.asp?pg=1&q=973pb%2A&catLike=W&sortBy=I&sortAsc=D&itemBrand=1000&v=1

Looks like 3472 was just used. I checked the Approval Pending Overview and 3473
and 3474 are Pending, so list yours as: 973pb3475c01

Jen

Cheers

Author:

jennnifer

Posted:

Mar 19, 2019 09:45

Subject:

Re: 1st time i've inventoried a minifig - help!

Viewed:

40 times

Topic:

In Catalog, slave2lego writes:

Hi, i'm trying to inventory a minifig (sc074) but the inventory page only
has 1 line and I cant work out how to add extra lines for each of the parts?

It looks like you already submitted the inventory with just the legs. That is
okay. You can still edit your Pending inventory. Click Market, Add or Change,
New Inventories. That should take you to a page where you can edit.

Jen

Also can somone breakdown the torso numbering convention as well?

Cheers

Author:

jennnifer

Posted:

Mar 16, 2019 09:11

Subject:

Re: Search for multiple items ?

Viewed:

21 times

Topic:

In Suggestions, Brickwilbo writes:

This already exists. Use the Wantlist add and. Buy and Search features.
Click the heart icon and add items to a Wantlist: https://www.bricklink.com/v2/wanted/list.page

It has always fascinated me that one the core functionalities of this site is
so often overlooked. How many times has a new (or not at all new) member come
to the Forum to ask for this very thing? They shouldn't have to!

How hard would it be a include elements in pages to educate users on the best
shopping and searching methods? Microsoft used to do it with a big animated paperclip.
lol

Jen

Author:

jennnifer

Posted:

Mar 16, 2019 09:06

Subject:

Re: Inventory Change Request for Set 31072-1

Viewed:

20 times

Topic:

In Inventories Requests, Fran_ writes:

Please make changes to the following inventory:

31072-1 (Inv) Extreme Engines
109 Parts, 2018
Sets: Creator: Model: Race

* Delete 1 Part 4282 Light Bluish Gray Plate 2 x 16 (Extra)

Comments from Submitter:
There is no 4282 (2x16 plate) extra item. I just opened a new set; in addition, this kind of item is (almost?) never present as an extra in sets of this size.

Hello,
I am sure the admins will repost their policy about Extras for you. However,
I will just quickly let you know that extras vary by region and that it is very
common to find a large part such as this as an extra in a small set in the US
market. Any items that come loose in the box frequently include an extra.

Jen

Author:

jennnifer

Posted:

Mar 13, 2019 19:53

Subject:

Re: Search for parts without dimensions

Viewed:

25 times

Topic:

In Suggestions, Etown writes:

I would like to go back to the beginning of this thread point out that I was
just trying to add information where there was confusion, that I do not use or
have a working knowledge of the Instant Checkout system nor am I defending it,
that my knowledge is limited to the Catalog only (which I know a great deal about,)
and that I am sorry for causing any trouble.

Good luck all at working out these issues!

Out...
Jen

Author:

jennnifer

Posted:

Mar 13, 2019 09:26

Subject:

Re: Search for parts without dimensions

Viewed:

29 times

Topic:

In Suggestions, Etown writes:

I was just coming to suggest this very thing. Before I did though I checked,
and no, there is no such box. That would probably be one of those "inventory
management tools" that were promised years ago but have yet to materialise.

Author:

jennnifer

Posted:

Mar 12, 2019 09:56

Subject:

Re: Search for parts without dimensions

Viewed:

34 times

Topic:

In Suggestions, SchmickBricks writes:

No, that doesn't help at all. Why can't sellers have an option to search
their inventory for items without dimensions so we can add our own? Unfortunately
there are a lot of items in the catalogue without dimensions that have been set
by default as weight bound rather than volume bound that can't (In Australia
at least) be sent as a large letter as they will exceed the 20mm maximum thickness.
This wasn't as big an issue in the past, but now with instant checkout it
is. Why should it matter if an item does or doesn't fit within the normal
stud/brick height system? Surely the main purpose of dimensions is for calculating
postage costs?
It's not that difficult to pull out a ruler or tape measure and measure
something. I'm happy to do it myself to my own inventory, just give me the
option to search for items that don't have catalogue dimensions like we can
for items without weight.

First, I didn't make this system and I would certainly NEVER defend it.
I was just trying to explain some the details.

Second, you can absolutely look up parts missing shipping dimensions in your
inventory. I don't use Instant Checkout, but I believe there is a checkbox
for Instant Checkout Unavailable on your My Inventory page.
Your original post seemed to be asking about item dimensions which are not the
same thing.

Author:

jennnifer

Posted:

Mar 12, 2019 09:50

Subject:

Re: Search for parts without dimensions

Viewed:

31 times

Topic:

In Suggestions, cosmicray writes:

This is one of the incongruities of BrickLink. Dimensions are measured in studs
(system or duplo) in the Catalog, but the override fields below a lot entry are
in millimeters.

For example, a Duplo Brick 2600 shows on the catalog page as "Size: 2 x 6 x 1
in studs", but underneath a listed lot it is …

DimX(mm): 96mm
DimY(mm): 23.6mm
DimZ: (mm) 32mm
(and yes, the semi-colon is used inconsistently there)

I do not wish that we entered by studs for manual overrides, but it's clear
to me that the system is converting from one to another for the benefit of IC.
It's also clear that you can override any part to any set of dimensions if
you wanted to.

Nita Rae

The incongruity exists because BL has not yet decided to implement the newer
shipping data within the existing catalog structure and database.

Each part has a data field in the catalog for Item Dimensions (listed on each
catalog page as Size.) This is measured approximately in studs / brick height.
The data is supplied by members and is maintained by the Catalog Admin though
the forms on the Add or Change tab.

The newer shipping dimensions data was put in place along with Instant Checkout.
This data is only in mm. The data is not visible except on the My Inventory and
Order Detail pages. The data is maintained by the staff at BrickLink and is submitted
by members on a thread here in the Forum. I believe they originally calculated
many of their measurements from the catalog Item Dimensions data. They have not
maintained consistency in which measurements are X, Y, or Z, or how precise measurements
must be. However, you can change the data for each part in your own shop from
your Inventory detail page.

Hope that helps,
Jen

Author:

jennnifer

Posted:

Mar 11, 2019 14:32

Subject:

Re: Search for parts without dimensions

Viewed:

43 times

Topic:

In Suggestions, SchmickBricks writes:

Can we please have an option to search our inventory for items without dimensions
in the catalogue? There is already an option to search for items without a catalogue
weight or items that won't work with instant checkout, but it won't help
with finding items that are set as weight bound by default with no dimensions
(Curved train track, some rollercoaster track) which are potentially too big
to send in a letter.

Prohibiting new sets from being inventoried without all the parts having weights
and dimensions would be a big help too, providing users don't add arbitrary
values which seems to be the case for 99% of instruction books at the moment.

There are more than 20,000 items in the catalog without dimensions. Catalog dimensions
are only added when the item fits within the normal stud/brick height system.

https://www.bricklink.com/catalogList.asp?v=3&itemDim=0

1x1 brick: dimensions are 1x1x1 in studs
minifig torso: ?

If it can't be reasonably measured in studs vs brick height, a part will
have no data at all.

Hope that helps,
Jen

Author:

jennnifer

Posted:

Mar 7, 2019 16:47

Subject:

Update requested

Viewed:

138 times

Topic:

Status:

Open

So, what is the status of the new Catalog Admin search? Things are backing up...

Author:

jennnifer

Posted:

Jan 29, 2019 08:55

Subject:

Re: Hair image incorrect

Viewed:

33 times

Topic:

In Suggestions, mroppoli writes:

92256 black image incorrect

You don't think these are the correct images? Just curious...

https://brickset.com/parts/design-18636

Jen

Author:

jennnifer

Posted:

Jan 28, 2019 09:31

Subject:

Re: Inventory Change Request for Set 10704-1

Viewed:

28 times

Topic:

In Inventories Requests, Miketuk writes:

Please make changes to the following inventory:

10704-1 (Inv) Creative Box
900 Parts, 2017
Sets: Classic

* Delete 1 Part 2412b Flat Silver Tile, Modified 1 x 2 Grille with Bottom Groove / Lip (Extra)

Comments from Submitter:
This set doesn't contain extra 2412b in flat silver. I parted out 100 copies incl. extras and I find out, that I am 100 pieces of this part short now.

It is unfortunate you were caught short of these parts. I have heard this argument
so many times that it is indeed frustrating! However, the part out process has
a 'This part may or may not appear in your set' warning on every single
extra line item. Not sure why sellers would ignore this kind of warning?

Best of luck,
Jen

Author:

jennnifer

Posted:

Jan 25, 2019 10:17

Subject:

Re: Difference between sw0993 & sw0530

Viewed:

48 times

Topic:

Catalog Requests

Bump!

In Catalog, Stellar writes:

What is the difference between these two?

[m=sw0993]

sw0530 (Inv) Chief Tarfful
Minifigures: Star Wars: Star Wars Episode 3

Thanks

Author:

jennnifer

Posted:

Jan 24, 2019 15:33

Subject:

Re: Set weight variance

Viewed:

35 times

Topic:

In Catalog, kuschelig writes:

Could the package weight be different depending on country? (an inventory is
submitted by someone in EU and their packaging weighs less??)

There is absolutely a 10-25% difference in the weight of most sets between the
North American and worldwide markets. The difference is the weight of the paper
for the box and instructions and also the different paper size for the instructions.
I kept data on this for years and compared hundreds of sets. A significant portion
of the sets, boxes, and instructions on BrickLink would need to have two separate
weights in order to be accurate for everyone.

You can always set your own weight for items listed in your shop.

Hope that helps!
Jen

Author:

jennnifer

Posted:

Jan 22, 2019 13:08

Subject:

Re: Difference between sw0993 & sw0530

Viewed:

81 times

Topic:

In Catalog, grimsbricksuk writes:

Printing on the new body part is vastly improved over the original minifig, that
together with the new pcc justified a new minifig entry in the catalog.

I believe that if this were the case, there would be many, many more nearly similar
parts in our catalog.

Sellers have to be able to identify which part they have in hand with no more
then the text and image for reference. There needs to be some detail that isn't
subjective.

Jen

In Catalog, Stellar writes:

What is the difference between these two?

[m=sw0993]

sw0530 (Inv) Chief Tarfful
Minifigures: Star Wars: Star Wars Episode 3

Thanks

Author:

jennnifer

Posted:

Jan 21, 2019 10:01

Subject:

Re: Catalog: Sets: Ninjago: 30534-1 Ninja Workout

Viewed:

25 times

Topic:

In Catalog Requests, mylego4all writes:

Hello,
This item was entered in by Hygrotus added this item to the catalog on Dec 25,
2018, and is still PENDING APPROVAL.
Do you know how long it takes for approval. I have some of these I would like
to put up for sale.
Thanks

I would suggest submitting an image. New items need an image for approval.

https://www.bricklink.com/v2/catalog/catalogImageAdd.page?itemType=S

Jen

Author:

jennnifer

Posted:

Jan 15, 2019 00:38

Subject:

Re: Cancel change requests.

Viewed:

33 times

Topic:

Catalog Requests

In Catalog Requests, mcmit writes:

Please ignore /cancel my change requests to 10865 and 10895

I entered the wrong set number the first time and I made a error on the width
of 10895 details, regardless of that the details already submitted for 10895
correspond closely with the ones I entered.

You can cancel Pending Requests from your My Activity page:

https://www.bricklink.com/myActivity.asp?utm_content=subnav

Jen

Author:

jennnifer

Posted:

Jan 14, 2019 16:23

Subject:

Re: Complete set of Unikitty CMFs?

Viewed:

39 times

Topic:

In Catalog, leopard37 writes:

Hooray!!!!

I am also very happy to see a listing like this added to the catalog! I know
it is against custom but very useful for buyers and sellers.

Jen

Author:

jennnifer

Posted:

Dec 30, 2018 12:29

Subject:

Re: Inventory Change Request for Set 75210-1

Viewed:

41 times

Topic:

In Inventories Requests, Dino1 writes:

Where is the picture as proof?

Sorry if I have misunderstood, but it's weird that you would question the
addition of a part that is routinely included as an Extra submitted by a highly
reliable source. Unless there is something else here I am missing?

Have a good day,
Jen

Author:

jennnifer

Posted:

Dec 12, 2018 15:23

Subject:

Re: Stickered Parts separate category

Viewed:

41 times

Topic:

In Catalog Requests, brickphils writes:

Hi,

Pls create separate category for stickered parts so that we dont have to go through
them when we are browsing items only with decorated/printed ones.

Thanks.

While you are waiting for this suggestion, I recommend adding:

-sticker -stickers

to your search or any category you are browsing.

Good luck,
Jen

Author:

jennnifer

Posted:

Nov 23, 2018 11:16

Subject:

Re: Seventh Catalog Project Underway

Viewed:

45 times

Topic:

Hello,

Here are my initial thoughts on this subject. There are several reasons that
I like the current system of using set numbers on minifigs.

1) I think a minifig that only appears in one set should have a set number. I
would be willing to go as high as 3 set numbers in the Name before I feel it
would be annoying. It is useful for searches and anything useful should not be
easily discarded.

2) When a new minifig is added to the catalog and before the set it appears in
is inventoried and approved, the only way you can find it is with its name or
the set number in the title. It would not yet have the link for 'Item Appears
In.' This is the most important reason to keep the number.

3) Brickset links to our minifigs in searches, but only if the set number is
in the Name description:

https://brickset.com/search?query=40108&scope=All
https://brickset.com/minifigs/twn215/balloon-vendor-(40108)

Nice to know the only listing to buy this minifig is on BrickLink! That's
good (free) advertising.

I do also think that adding some more descriptors would be nice on some figs.

Jen

Author:

jennnifer

Posted:

Nov 12, 2018 10:11

Subject:

Re: Fourth Catalog Project Underway

Viewed:

54 times

Topic:

In Catalog, mfav writes:

I'm not suggesting this is currently a problem, but it does pose issues when
one comes to implementing features such as Jen suggests.

You keep coming back to and picking apart this idea? Please consider:

1) This idea has been asked for from the original BrickLink session in Seattle
more years ago then I would like to count up.

2) It would be a convenience to many users (and especially newbies) to be able
to further constrain their search results. "I am tying to find something, but
there are too many stickered parts in the way" has been stated numerous times
in the Forum over the years.

3) I do not believe that it would be complicated, difficult to implement, or
require touching the database. Each checkbox would simply add the necessary text
string '-pattern' '-sticker' to the search parameters. I have
spoken to people more knowledgeable than me who have assured me this is a real
thing.

4) It could appear within the search bar at the top of any catalog search results
page. One checkbox to Hide Decorated parts. One checkbox to Hide Stickers. The
new page designs are already likely wide enough to accommodate this. Try it searching
for 'tile 1x6' and then 'tile 1x6 -sticker' to get a feel for
how it might function when someone is looking for a part. Then, try 'legs
hips' and 'legs hips -pattern'

5) There would be less pressure on the admins to split some categories if these
options were easily available to everyone. Splits are still needed and necessary,
but I will restate that this would simply alleviate some of the pressure to do
so.

I admit that I do not really understand where you are coming from with these
last few posts discussing my little afterthought suggestion. It is not feeling
like a discussion much from my end so I am going to say thanks now for adding
your comments and that this is the last I have to say on the matter. I look forward
to this discussion heading back toward catalog issues and not coding for the
site which BL is not currently considering.

Take care!
Jen

Author:

jennnifer

Posted:

Nov 10, 2018 13:41

Subject:

Re: Fourth Catalog Project Underway

Viewed:

35 times

Topic:

Sorry if you have taken my statements in a different context then I meant them.
I am simply adding my thoughts and opinions to the discussion, not solving every
problem on BrickLink.

Jen

Author:

jennnifer

Posted:

Nov 10, 2018 13:38

Subject:

Re: Baseplates not (easy) to find

Viewed:

44 times

Topic:

In Catalog, building4ever writes:

A precision: As Jennifer said, the years for the sets are the years the sets
were first released. But the years for the parts are the oldest and newest years
of the sets they appear in, they are automatically calculated.

Ah ok, that explains it. Still I doubt that the search for base plates is very
straightforward or accessible. Why so complicated?

It is simply the data that we have. We know when sets are released, not when
LEGO stops making/selling/distributing them.
And I understand that the catalog system does seem complicated at first, but
it is really a fantastic resource once you get used to it. People here are always
happy to try and answer any questions you have about it!

Jen

Author:

jennnifer

Posted:

Nov 10, 2018 11:48

Subject:

Re: Baseplates not (easy) to find

Viewed:

48 times

Topic: