Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | WilliamRaine  | | Posted: | Jun 7, 2021 20:54 | | Subject: | Parts with string attached as counterparts? | | Viewed: | 78 times | | Topic: | Catalog | | Status: | Open | |
| Is there a sort of limit on how these should be listed? The medium and thick
string is easy enough to untie from my experience, but when it comes to the thin
string
I have found it nearly impossible to untie this string from parts without damaging
the string.
So the question is what parts would be considered an acceptable counterpart?
There are some assemblies I imagine may not be counted as so, such as the drawbridge
string in Black Monarch's Castle (The string is tied to two pieces with various
pieces caught up in the middle) and the hook string in a few of the vintage pirate
ships (this is often strung through one of the mast segments)
I have noticed a few parts that have counterparts listed already, such as these
pieces:
One part that I think should be listed as a stringed counterpart would be this
one:
|
 |
| Author: | WilliamRaine | | Posted: | Jun 7, 2021 04:23 | | Subject: | Inventory Change Request for Set 1737-1 | | Viewed: | 27 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Change {7 to 8} Part Black 3022 Plate 2 x 2
Comments from Submitter:
Unless I'm missing something, this set shares the same instruction booklet as set
and they both include x8 of these.
|
|
| Author: | WilliamRaine | | Posted: | Jun 3, 2021 13:16 | | Subject: | Re: Inventory Change Request for Set 6559-1 | | Viewed: | 20 times | | Topic: | Inventories Requests | |
| In Inventories Requests, Turez writes:
| | In Inventories Requests, WilliamRaine writes:
| | Please make changes to the following inventory:
* Delete 1 Part x77a Black String, Cord Thin (Undetermined Length Type)
* Add 1 Part x77ac20 Black String, Cord Thin 20cm
* Add 1 Part x77ac75 Black String, Cord Thin 75cm
Comments from Submitter:
https://brickshelf.com/cgi-bin/gallery.cgi?i=2128927
http://www.peeron.com/inv/sets/6559-1
There are two strings that come with this set, a shorter string for the fishing pole and a longer one for the crane. Judging from the information in the above two links I believe these two lengths are correct for this set, however I do not own it new and have no further evidence of the length of the actual length of the two strings. If anyone owns this set new and could confirm, it would be appreciated.
|
I actually have the set ( ) but I got it when I was 4 or 5 years old and played
a lot with it at that time so I cannot guarantee that my parts are still original.
The short string has been replaced many years ago but I just checked the long
string as that seems to be original and it has a lengh of about 77cm.
|
Awesome! Thank for your help, I appreciate it. I received the set used recently
and both the fishing pole and the crane winch are missing, so here I am figuring
out the lengths hehe. I will get it back 100% 
I always wanted some of these diver sets when I was a kid, the one I had was
Shark Attack with the 3 sharks
|
|
| Author: | WilliamRaine | | Posted: | Jun 3, 2021 12:38 | | Subject: | Inventory Change Request for Set 6559-1 | | Viewed: | 34 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part x77a Black String, Cord Thin (Undetermined Length Type)
* Add 1 Part x77ac20 Black String, Cord Thin 20cm
* Add 1 Part x77ac75 Black String, Cord Thin 75cm
Comments from Submitter:
https://brickshelf.com/cgi-bin/gallery.cgi?i=2128927
http://www.peeron.com/inv/sets/6559-1
There are two strings that come with this set, a shorter string for the fishing pole and a longer one for the crane. Judging from the information in the above two links I believe these two lengths are correct for this set, however I do not own it new and have no further evidence of the length of the actual length of the two strings. If anyone owns this set new and could confirm, it would be appreciated.
|
|
| Author: | WilliamRaine | | Posted: | Jun 3, 2021 12:32 | | Subject: | Re: Inventory Change Request for Set 6559-1 | | Viewed: | 19 times | | Topic: | Inventories Requests | |
| In Inventories Requests, Turez writes:
| | In Inventories Requests, WilliamRaine writes:
| | Please make changes to the following inventory:
* Delete 1 Part x77a Black String, Cord Thin (Undetermined Length Type)
* Add 1 Part x77ac25 Black String, Cord Thin 25cm
* Add 1 Part x77ac100 Black String, Cord Thin 100cm
Comments from Submitter:
https://brickshelf.com/cgi-bin/gallery.cgi?i=2128927
http://www.peeron.com/inv/sets/6559-1
There are two strings that come with this set, a shorter string for the fishing pole and a longer one for the crane. Judging from the information in the above two links I believe these two lengths are correct for this set, however I do not own it new and have no further evidence of the length of the actual length of the two strings. If anyone owns this set new and could confirm, it would be appreciated.
|
Those lenghs on peeron are in studs, not in cm. 
The short string is shown in the instructions with a lengh of 20cm.
The long string is most likely
as this part has already been confirmed in several other Divers sets.
|
Oh no! My mistake, I will delete this request and submit a new one. Thank you
for pointing that out.
|
|
| Author: | WilliamRaine | | Posted: | Jun 3, 2021 06:10 | | Subject: | Re: Black String, Cord Thin length in sets | | Viewed: | 25 times | | Topic: | Catalog | |
| In Catalog, Turez writes:
| | In Catalog, WilliamRaine writes:
| | In Catalog, cycbuild writes:
| | In Catalog, WilliamRaine writes:
Cut down to approx. 15cm and 85cm lengths (fishing rod + crane)
Smallest length available for anchor line.
| | Does anyone know how long the string is that comes in these sets? If anyone does
that would be very helpful, thank you.
|
Recommend a longer line and trimming it to size(s). 200cm is currently cheaper
on BrickLink than the 150cm and 122cm lengths. Cheers
|
Thank you for the reply I really appreciate it! I will probably get the 200cm
for these 2 sets, thanks for mentioning it.
|
Set 6559 should have two strings (not one that needs to be cut).
See unboxing here:
https://brickshelf.com/cgi-bin/gallery.cgi?i=2128927
(and following images)
Peeron has lenghs for them: http://www.peeron.com/inv/sets/6559-1
|
Thanks for this! I'm going to submit a request to add these strings in the
approximate length listed on peeron. Maybe someday it can be confirmed by someone
who owns it new
|
|
| Author: | WilliamRaine | | Posted: | Jun 3, 2021 04:31 | | Subject: | Re: Black String, Cord Thin length in sets | | Viewed: | 43 times | | Topic: | Catalog | |
| In Catalog, cycbuild writes:
| | In Catalog, WilliamRaine writes:
Cut down to approx. 15cm and 85cm lengths (fishing rod + crane)
Smallest length available for anchor line.
| | Does anyone know how long the string is that comes in these sets? If anyone does
that would be very helpful, thank you.
|
Recommend a longer line and trimming it to size(s). 200cm is currently cheaper
on BrickLink than the 150cm and 122cm lengths. Cheers
|
Thank you for the reply I really appreciate it! I will probably get the 200cm
for these 2 sets, thanks for mentioning it.
|
|
| Author: | WilliamRaine | | Posted: | May 30, 2021 14:52 | | Subject: | Black String, Cord Thin length in sets | | Viewed: | 101 times | | Topic: | Catalog | | Status: | Open | |
|
Does anyone know how long the string is that comes in these sets? If anyone does
that would be very helpful, thank you.
|
|
| Author: | WilliamRaine | | Posted: | May 29, 2021 19:39 | | Subject: | Re: Removing glue from parts? | | Viewed: | 41 times | | Topic: | LEGO products | |
| In LEGO, WilliamRaine writes:
| | I recently got a Flying Time Vessel in a lot, and it is all glued together! The
glue does seem particularly strong, as much of the set has come apart on its
own and I see no broken pieces, it's also possible to scrape and pull off
bits of glue from some of the pieces.
I was thinking of trying hot water or alcohol, but thought I would first ask
here if anyone has any sure fire methods for getting glue off of parts.
|
Well.....seems only -some- of the parts used that mild adhesive, a lot of the
ship is actually glued with something far more hardcore. I had to throw it out
I did manage to salvage a few parts out of it though, mostly the technic pieces
and dragon arms from the front and such. At least it wasn't a more valuable
set!
|
|
| Author: | WilliamRaine | | Posted: | May 29, 2021 11:42 | | Subject: | Re: Removing glue from parts? | | Viewed: | 29 times | | Topic: | LEGO products | |
| In LEGO, WilliamRaine writes:
| | I recently got a Flying Time Vessel in a lot, and it is all glued together! The
glue does seem particularly strong, as much of the set has come apart on its
own and I see no broken pieces, it's also possible to scrape and pull off
bits of glue from some of the pieces.
I was thinking of trying hot water or alcohol, but thought I would first ask
here if anyone has any sure fire methods for getting glue off of parts.
|
Thanks for all the tips I'll try cleaning it up soon with hot water first!
|
|
| Author: | WilliamRaine | | Posted: | May 28, 2021 17:00 | | Subject: | Removing glue from parts? | | Viewed: | 106 times | | Topic: | LEGO products | |
| I recently got a Flying Time Vessel in a lot, and it is all glued together! The
glue does seem particularly strong, as much of the set has come apart on its
own and I see no broken pieces, it's also possible to scrape and pull off
bits of glue from some of the pieces.
I was thinking of trying hot water or alcohol, but thought I would first ask
here if anyone has any sure fire methods for getting glue off of parts.
|
| Author: | WilliamRaine | | Posted: | May 25, 2021 20:51 | | Subject: | Re: (Cancelled) | | Viewed: | 25 times | | Topic: | Inventories Requests | |
| In Inventories Requests, WilliamRaine writes:
Nevermind I should have checked the change log first.
|
| Author: | WilliamRaine | | Posted: | May 25, 2021 09:17 | | Subject: | Re: NEW Utensil Briefcase / Suitcase broken | | Viewed: | 35 times | | Topic: | Selling | |
| In Selling, legobasar writes:
| | I just checked my NEW Sets Zombie Businessman, Series 14 col14-13:
https://www.bricklink.com/v2/catalog/catalogitem.page?S=col14-13
I noticed, that all Utensil Briefcase / Suitcase are folded, but they are broken
in 2 parts when unfolded, although they were sorted out from new sealed sets!
Anyone else who noticed this?
|
Not with that specific set, but I have noticed this suitcase part splits into
two pieces very easily, I have a bunch of them that are in two pieces, far more
than the ones that are still connected. I think most of my split in half ones
are black though.
|
|
| Author: | WilliamRaine | | Posted: | May 23, 2021 20:03 | | Subject: | 5972 Space Truck Getaway missing part | | Viewed: | 63 times | | Topic: | Wanted | |
|
* | | 61800pb07R Bionicle Wing Small / Tail with Axle Hole with Red and Black Striped Panel and Scratched Panel with Gray Holes Pattern Model Right Side (Stickers) - Set 5972
Parts: BIONICLE |
Concerning this piece, the left side stickered variant is missing from the catalog,
and just happens to be some of the stickers I am missing. I was wondering if
anyone has this and can add it to the catalog, and if anyone has this piece for
sale?
I has two stickers applied to it, there are 5 stickers in all on these bionicle
wings in the set (x1 on the rear right, x2 on front right and x2 on the front
left)
|
|
|
| Author: | WilliamRaine | | Posted: | May 22, 2021 02:15 | | Subject: | Re: Help identifying torso part 2 | | Viewed: | 15 times | | Topic: | Catalog Identification | |
| In Catalog Identification, sellij writes:
| | Hi all, I would once again like to appeal to your knowledge.
I'm down to my last 8 torso's, but I can't find these on bricklink
or via google.
The first picture, blue and brown, I suspect this could be Star Wars?
2nd picture perhaps a knight? And?
3rd picture a butler? And?
4th picture No clue of either.....
Thanks again!
|
I know these two anyway, fright knights and UFO:
|
|
| Author: | WilliamRaine | | Posted: | May 17, 2021 19:37 | | Subject: | Re: Random expensive parts list | | Viewed: | 38 times | | Topic: | Off Topic | |
| In Off Topic, MrPetovan writes:
| | Replace the curly braces by square braces if you want to use the macro tags!
In Off Topic, WilliamRaine writes:
| | {p=30033,5}
Man it's unfortunate when you buy a used set and find out a part like this
is missing....
|
|
Realized my mistake too late! Aaaaand can't edit my post. I'll remember
next time!
|
| Author: | WilliamRaine | | Posted: | May 17, 2021 18:31 | | Subject: | Re: Random expensive parts list | | Viewed: | 53 times | | Topic: | Off Topic | |
| In Off Topic, firestar246 writes:
{p=30033,5}
Man it's unfortunate when you buy a used set and find out a part like this
is missing....
|
|
| Author: | WilliamRaine | | Posted: | May 16, 2021 19:31 | | Subject: | Re: Stop listed after positive feedback? | | Viewed: | 68 times | | Topic: | General | |
| In General, wildchicken13 writes:
| | In General, WilliamRaine writes:
| | I had a problem order recently (incorrect and missing parts) and the seller gave
me a refund to cover the parts. We both left positive feedback, and now the seller
has stop listed me.
Just seems silly to stop list someone in such a situation. Curious about others
thoughts, I guess?
|
It happens. Sellers can stoplist anyone for any reason. Don't take it personally.
Move on and take your business elsewhere
|
I won't, plenty of sellers on the site. It would be more of a bummer if the
website was smaller. Moving on!
|
|
| Author: | WilliamRaine | | Posted: | May 16, 2021 18:54 | | Subject: | Stop listed after positive feedback? | | Viewed: | 209 times | | Topic: | General | |
| I had a problem order recently (incorrect and missing parts) and the seller gave
me a refund to cover the parts. We both left positive feedback, and now the seller
has stop listed me.
Just seems silly to stop list someone in such a situation. Curious about others
thoughts, I guess?
|
| Author: | WilliamRaine | | Posted: | May 16, 2021 18:12 | | Subject: | Cardboard Sleeve 4580964 | | Viewed: | 47 times | | Topic: | Catalog Requests | | For: | Catalog Associate | | Status: | Completed | |
|
Please add in description this is found in the following set:
Source: Sealed Set Contents
|
| Author: | WilliamRaine | | Posted: | May 16, 2021 17:42 | | Subject: | Cardboard Sleeve 6049739 | | Viewed: | 49 times | | Topic: | Catalog Requests | | For: | Catalog Associate | | Status: | Completed | |
|
Please add in description this is found in the following set:
Source: Sealed Set Contents
|
| Author: | WilliamRaine | | Posted: | May 16, 2021 17:39 | | Subject: | Cardboard Sleeve 6109702 | | Viewed: | 42 times | | Topic: | Catalog Requests | | For: | Catalog Associate | | Status: | Completed | |
|
Please add in description this is found in the following set:
Source: Sealed Set Contents
|
|
| Author: | WilliamRaine | | Posted: | May 12, 2021 13:49 | | Subject: | Re: Inventory Change Request for Set 4432-1 | | Viewed: | 18 times | | Topic: | Inventories Requests | |
| In Inventories Requests, Fyrkanten writes:
| | Please make changes to the following inventory:
* Add 1 Part 4032 Dark Bluish Gray Plate, Round 2 x 2 with Axle Hole
* Add 2 Part 3176 Light Bluish Gray Plate, Modified 3 x 2 with Hole
* Add 1 Part 2654 Light Bluish Gray Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)
* Add 3 Part 3065 Trans-Black Brick 1 x 2 without Bottom Tube
Comments from Submitter:
4032 and 2654 are missing completely in inventory.
3176 and 3065 are listed but with wrong quantity.
I have listed the correct total amount of parts.
/Sara
|
It appears this set was redesigned during production, check the bottom of the
inventory for the parts that were added for the redesign.
|
|
| Author: | WilliamRaine | | Posted: | May 8, 2021 14:59 | | Subject: | Inventory Change Request for Set 8880-1 | | Viewed: | 29 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part BA131pb03 Black Stickered Assembly 8 x 2 with LEGO Technic Logo, Yellow Stripe and '4x4x4' Pattern (Sticker) - Set 8880 - 2 Tile 1 x 8 (Counterpart)
Comments from Submitter:
Stickered counterpart
|
|
| Author: | WilliamRaine | | Posted: | May 7, 2021 17:34 | | Subject: | Inventory Change Request for Set 4195-1 | | Viewed: | 25 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Minifig poc043 Queen Anne's Revenge Masthead
* Delete 2 Part 59230 White Arm Mechanical, Straight with Clips at 90 degrees (Vertical Grip)
* Delete 1 Part 93060 Trans-Orange Torso Skeleton, Angular Rib Cage, Plain
* Change {17 to 16} Part White 3626bpb0001 Minifigure, Head Skull Standard Pattern - Blocked Open Stud
* Change {17 to 16} Part White 3626cpb0001 Minifigure, Head Skull Standard Pattern - Hollow Stud (Alternate)
* Change {2 to 3} Part White 3626cpb0001 Minifigure, Head Skull Standard Pattern - Hollow Stud (Alternate)
* Change {6 to 4} Part White 30377 Arm Mechanical, Battle Droid
Comments from Submitter:
Changes to reflect the masthead as a figure entry
|
|
| Author: | WilliamRaine | | Posted: | Apr 30, 2021 19:15 | | Subject: | Inventory Change Request for Set 70810-1 | | Viewed: | 26 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 4 Part 553c Pearl Gold Brick, Round 2 x 2 Dome Top - Hollow Stud with Bottom Axle Holder x Shape + Orientation (Alternate) (match ID 4)
* Change 4 Part Pearl Gold 553b Brick, Round 2 x 2 Dome Top - Blocked Open Stud with Bottom Axle Holder x Shape + Orientation {match ID 0 to 4}
Comments from Submitter:
Used Set, though it comes with x4 of the hollow stud variant. Wondering if anyone who has the set new can confirm this?
|
|
| Author: | WilliamRaine | | Posted: | Apr 30, 2021 15:57 | | Subject: | Inventory Change Request for Set 70810-1 | | Viewed: | 29 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 4 Part 3957b Black Antenna 4H - Flat Top (Alternate) (match ID 3)
* Change 4 Part Black 3957 Antenna 4H - Round Top {match ID 0 to 3}
Comments from Submitter:
Used set, though it came with x4 of the flat top variant. Looking to see if anyone else can verify from a new set?
|
|
| Author: | WilliamRaine | | Posted: | Apr 16, 2021 17:04 | | Subject: | Inventory Change Request for Set 70423-1 | | Viewed: | 29 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 3009pb238 Bright Light Orange Brick 1 x 6 with Drill and Rust Pattern (Sticker) - Set 70423 (Counterpart)
* Add 2 Part 24599pb03a Bright Light Orange Brick, Round Corner 5 x 5 x 1 without Studs with Damaged Medium Azure Stripe and Rust Pattern Side A (Sticker) - Set 70423 (Counterpart)
* Add 2 Part 24599pb03b Bright Light Orange Brick, Round Corner 5 x 5 x 1 without Studs with Damaged Medium Azure Stripe and Rust Pattern Side B (Sticker) - Set 70423 (Counterpart)
* Add 1 Part 62698pb15 Black Minifigure, Utensil Computer Laptop with Crosshairs and 2 Ghosts on Screen Pattern (Sticker) - Set 70423 (Counterpart)
* Add 1 Part 15210pb096 White Road Sign 2 x 2 Square with Open O Clip with Ghosts on Computer Screen Pattern (Sticker) - Set 70423 (Counterpart)
* Add 1 Part 15210pb095 White Road Sign 2 x 2 Square with Open O Clip with Robot on Computer Screen Pattern (Sticker) - Set 70423 (Counterpart)
* Add 1 Part 85984pb314 Light Bluish Gray Slope 30 1 x 2 x 2/3 with Damaged Speedometer, Gauge and Screws Pattern (Sticker) - Set 70423 (Counterpart)
* Add 1 Part 15068pb343 Bright Light Orange Slope, Curved 2 x 2 with Black Number 23 and Rust Pattern (Sticker) - Set 70423 (Counterpart)
* Add 1 Part 2431pb685 Black Tile 1 x 4 with 'NEWBURY HIGH' and 'GG 4940' License Plate Pattern (Sticker) - Set 70423 (Counterpart)
* Add 1 Part 87079pb920 Bright Light Orange Tile 2 x 4 with 'SCHOOL BUS' and Rust Pattern (Sticker) - Set 70423 (Counterpart)
* Add 1 Part 11203pb065 White Tile, Modified 2 x 2 Inverted with Warning Triangle Road Sign with Minifigure Worker Shoveling Pattern (Sticker) - Set 70423 (Counterpart)
Comments from Submitter:
Stickered Parts
|
|
| Author: | WilliamRaine | | Posted: | Apr 13, 2021 05:14 | | Subject: | Inventory Change Request for Set 42052-1 | | Viewed: | 32 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 15458pb034 Green Technic, Panel Plate 3 x 11 x 1 with White ‘BRICKS & BEAMS LTD’ and Black Lines Pattern (Sticker) - Set 42052 (Counterpart)
Comments from Submitter:
Stickered part
|
| Author: | WilliamRaine | | Posted: | Apr 12, 2021 16:58 | | Subject: | Inventory Change Request for Set 75258-1 | | Viewed: | 27 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 28802 Blue Bracket 1 x 2 - 1 x 4 with Two Rounded Corners at the Bottom (Alternate) (match ID 1)
* Change 2 Part Blue 2436b Bracket 1 x 2 - 1 x 4 with Rounded Corners {match ID 0 to 1}
Comments from Submitter:
Source: Sealed Set Contents
|
|
| Author: | WilliamRaine | | Posted: | Mar 13, 2021 16:54 | | Subject: | Inventory Change Request for Set 9462-1 | | Viewed: | 18 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 3626bpb0736 Yellow Minifigure, Head Dual Sided Female Scar over Left Eye, Raised Eyebrow / Scowl Pattern (Ann Lee) - Blocked Open Stud (Alternate) (match ID 5)
* Add 1 Part 3626cpb0713 White White Minifigure, Head Alien with Red Eyes and Glow In Dark Mummy Wrapping Pattern - Hollow Stud (Alternate) (match ID 6)
Comments from Submitter:
Source: Sealed Set Contents
|
|
| Author: | WilliamRaine | | Posted: | Mar 12, 2021 18:43 | | Subject: | Inventory Change Request for Set 9461-1 | | Viewed: | 24 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 3626cpb0750 Yellow Minifigure, Head Dual Sided Black Sunglasses, Stubble, Scratches, Grin / Black Eyebrows, White Pupils, Determined Pattern (Frank Rock) - Hollow Stud (Alternate) (match ID 4)
Comments from Submitter:
Source: Sealed Set Contents
|
|
| Author: | WilliamRaine | | Posted: | Mar 11, 2021 04:11 | | Subject: | Inventory Change Request for Set 9461-1 | | Viewed: | 32 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 93789 Dark Brown Minifigure, Weapon Pike / Spear - Flat End (Alternate) (match ID 3)
* Change 1 Part Dark Brown 4497 Minifigure, Weapon Pike / Spear - Round End {match ID 0 to 3}
Comments from Submitter:
Sourse: Sealed Set Contents
|
| Author: | WilliamRaine | | Posted: | Mar 7, 2021 21:14 | | Subject: | Inventory Change Request for Set 9468-1 | | Viewed: | 27 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 30163c03pb01 Black Container, Coffin with White Bat Pattern Lid (Counterpart)
|
| Author: | WilliamRaine | | Posted: | Feb 25, 2021 22:03 | | Subject: | Inventory Change Request for Set 20208-1 | | Viewed: | 23 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Delete 2 Part 4510 Light Bluish Gray Plate, Modified 1 x 8 with Door Rail
* Add 2 Part 30586 Light Bluish Gray Plate, Modified 2 x 8 with Door Rail
Comments from Submitter:
Wrong part
|
|
| Author: | WilliamRaine | | Posted: | Sep 4, 2020 06:46 | | Subject: | Inventory Change Request for Set 10273-1 | | Viewed: | 34 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Delete 37 Part 60592c01 Dark Brown Window 1 x 2 x 2 Flat Front with Trans-Clear Glass for Window 1 x 2 x 2 Flat Front (60592 / 60601) (Counterpart)
* Add 37 Part 60592c01 Reddish Brown Window 1 x 2 x 2 Flat Front with Trans-Clear Glass for Window 1 x 2 x 2 Flat Front (60592 / 60601) (Counterpart)
* Change {148 to 149} Part Black 3711 Technic, Link Chain
* Change {4 to 3} Part Black 3711 Technic, Link Chain (Extra)
Comments from Submitter:
Window frame is listed under the wrong color.
The chain is very, very tight when using x148 links (this is the listed amount in the physical instructions) and this leaves x4 extra. However, the PDF instructions clearly show a redesigned step to alleviate this, adding a single extra link to the chain.
|
|
| Author: | WilliamRaine | | Posted: | Sep 3, 2020 13:48 | | Subject: | Re: Inventory Change Request for Set 5550-1 | | Viewed: | 18 times | | Topic: | Inventories Requests | |
| In Inventories Requests, Nordbart writes:
| | In Inventories Requests, StormChaser writes:
| | These wheels came preassembled:
|
Can confirm. These wheels are a pain to get apart anyway. It was impossible for
my 9 year old self without the use of something sharp and pointy.
Ah the memories...
nordbart
|
Come to think of it, I think I have only encountered the hubs when they were
specifically used without a tire in the first place....
|
|
| Author: | WilliamRaine | | Posted: | Sep 3, 2020 13:46 | | Subject: | Re: Inventory Change Request for Set 5550-1 | | Viewed: | 22 times | | Topic: | Inventories Requests | |
| In Inventories Requests, StormChaser writes:
| | In Inventories Requests, WilliamRaine writes:
| | Please make changes to the following inventory:
* Delete 5 Part 2695c01 White Wheel 30mm D. x 13mm (13 x 24 Model Team), with Black Tire 13 x 24 Model Team (2695 / 2696)
* Add 5 Part 2695c01 White Wheel 30mm D. x 13mm (13 x 24 Model Team), with Black Tire 13 x 24 Model Team (2695 / 2696) (Counterpart)
* Add 5 Part 2695 White Wheel 30mm D. x 13mm (13 x 24 Model Team)
* Add 5 Part 2696 Black Tire 13 x 24 Model Team
|
These wheels came preassembled:
http://www.brickshelf.com/cgi-bin/gallery.cgi?i=2651091
|
Ah, pre assembled? I did not know that. I have seen them in other inventories
disassembled and assumed it was standard to list them in inventories this way.
Nevermind then!
|
|
| Author: | WilliamRaine | | Posted: | Sep 3, 2020 03:50 | | Subject: | Inventory Change Request for Set 5550-1 | | Viewed: | 35 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Delete 5 Part 2695c01 White Wheel 30mm D. x 13mm (13 x 24 Model Team), with Black Tire 13 x 24 Model Team (2695 / 2696)
* Add 5 Part 2695c01 White Wheel 30mm D. x 13mm (13 x 24 Model Team), with Black Tire 13 x 24 Model Team (2695 / 2696) (Counterpart)
* Add 5 Part 2695 White Wheel 30mm D. x 13mm (13 x 24 Model Team)
* Add 5 Part 2696 Black Tire 13 x 24 Model Team
|
|
| Author: | WilliamRaine | | Posted: | Aug 27, 2020 01:43 | | Subject: | Inventory Change Request for Set 10151-1 | | Viewed: | 27 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Delete 2 Part 3009pb065 Blue Brick 1 x 6 with White 'Hot Rod' Text Pattern (Sticker) - Set 5541 (Counterpart)
* Add 1 Part BA232pb01R Blue Stickered Assembly 8 x 1 x 1 1/3 with White 'Hot Rod' Pattern Model Right Side (Sticker) - Set 5541 - 1 Brick 1 x 6, 1 Plate 1 x 8 (Counterpart)
* Add 1 Part BA232pb01L Blue Stickered Assembly 8 x 1 x 1 1/3 with White 'Hot Rod' Pattern Model Left Side (Sticker) - Set 5541 - 1 Brick 1 x 6, 1 Plate 1 x 8 (Counterpart)
Comments from Submitter:
Same changes to set 5541. Replacing incorrectly stickered part with the correct sticker over assembly.
|
|
| Author: | WilliamRaine | | Posted: | Aug 26, 2020 20:00 | | Subject: | Inventory Change Request for Set 5541-1 | | Viewed: | 31 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Delete 2 Part 3009pb065 Blue Brick 1 x 6 with White 'Hot Rod' Text Pattern (Sticker) - Set 5541 (Counterpart)
* Add 1 Part BA232pb01L Blue Stickered Assembly 8 x 1 x 1 1/3 with White 'Hot Rod' Pattern Model Left Side (Sticker) - Set 5541 - 1 Brick 1 x 6, 1 Plate 1 x 8 (Counterpart)
* Add 1 Part BA232pb01R Blue Stickered Assembly 8 x 1 x 1 1/3 with White 'Hot Rod' Pattern Model Right Side (Sticker) - Set 5541 - 1 Brick 1 x 6, 1 Plate 1 x 8 (Counterpart)
Comments from Submitter:
Deleting incorrectly stickered part and adding in the proper sticker over assemblies.
|
|
| Author: | WilliamRaine | | Posted: | Aug 26, 2020 19:56 | | Subject: | Re: How to add a stickered assembly to catalog? | | Viewed: | 27 times | | Topic: | Catalog | |
| In Catalog, BricksThatStick writes:
| | In Catalog, WilliamRaine writes:
| | In Catalog, BricksThatStick writes:
| | In Catalog, WilliamRaine writes:
| | I took photos of a couple stickered assembly parts for the following set:
How would I go about adding these stickered parts, as the previous entry has
the sticker placed incorrectly on a single 1x6 brick? I'm not completely
sure of the terminology that goes into adding a stickered assembly like this
to the catalog.
|
This is the category to use as reference:
https://www.bricklink.com/catalogListOld.asp?pg=1&catString=582&catType=P&v=1
I see you have added many items before so won't spell out the rest
|
It has been some time, a bit rusty on this but I think I can manage from here,
thanks for the help, much appreciated!
|
Here they are:
* | | BA232pb01L Stickered Assembly 8 x 1 x 1 1/3 with White 'Hot Rod' Pattern Model Left Side (Sticker) - Set 5541 - 1 Brick 1 x 6, 1 Plate 1 x 8
Parts: Stickered Assembly |
* | | BA232pb01R Stickered Assembly 8 x 1 x 1 1/3 with White 'Hot Rod' Pattern Model Right Side (Sticker) - Set 5541 - 1 Brick 1 x 6, 1 Plate 1 x 8
Parts: Stickered Assembly |
If you are submitting an inventory change request for them feel free to remove
the incorrectly stickered bricks from the inventory as well.
|
Thanks! I'll take care of that
|
|
| Author: | WilliamRaine | | Posted: | Aug 26, 2020 18:09 | | Subject: | Re: How to add a stickered assembly to catalog? | | Viewed: | 15 times | | Topic: | Catalog | |
| In Catalog, BricksThatStick writes:
| | In Catalog, WilliamRaine writes:
| | I took photos of a couple stickered assembly parts for the following set:
How would I go about adding these stickered parts, as the previous entry has
the sticker placed incorrectly on a single 1x6 brick? I'm not completely
sure of the terminology that goes into adding a stickered assembly like this
to the catalog.
|
This is the category to use as reference:
https://www.bricklink.com/catalogListOld.asp?pg=1&catString=582&catType=P&v=1
I see you have added many items before so won't spell out the rest
|
It has been some time, a bit rusty on this but I think I can manage from here,
thanks for the help, much appreciated!
|
|
| Author: | WilliamRaine | | Posted: | Aug 26, 2020 17:57 | | Subject: | How to add a stickered assembly to catalog? | | Viewed: | 34 times | | Topic: | Catalog | | Status: | Open | |
| I took photos of a couple stickered assembly parts for the following set:
How would I go about adding these stickered parts, as the previous entry has
the sticker placed incorrectly on a single 1x6 brick? I'm not completely
sure of the terminology that goes into adding a stickered assembly like this
to the catalog.
|
|
|
| Author: | WilliamRaine | | Posted: | Apr 14, 2020 15:16 | | Subject: | Inventory Change Request for Set 60122-1 | | Viewed: | 26 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 52031pb137 Lime Wedge 4 x 6 x 2/3 Triple Curved with Volcano Explorers Logo Compass Pattern (Sticker) - Set 60122 (Counterpart)
Comments from Submitter:
One other stickered part is missing from this inventory, though I am unable to find it in the catalog and I don't believe I have the part to add it myself.
|
| Author: | WilliamRaine | | Posted: | Apr 2, 2020 20:18 | | Subject: | Inventory Change Request for Set 3315-1 | | Viewed: | 22 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 3680c02 Black Turntable 2 x 2 Plate, Base with Light Bluish Gray Turntable 2 x 2 Plate, Top (3680 / 3679) (Counterpart)
|
| Author: | WilliamRaine | | Posted: | Mar 24, 2020 18:40 | | Subject: | Inventory Change Request for Set 1843-1 | | Viewed: | 19 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 4073 Trans-Dark Blue Plate, Round 1 x 1 (Extra)
* Add 1 Part 4073 Trans-Neon Green Plate, Round 1 x 1 (Extra)
Comments from Submitter:
Source: Sealed Set Contents
|
|
| Author: | WilliamRaine | | Posted: | Mar 23, 2020 20:55 | | Subject: | Inventory Change Request for Set 6273-1 | | Viewed: | 17 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 2562 Brown Minifigure, Weapon Gun, Pirate Flintlock Pistol (Extra)
* Change {5 to 4} Part Brown 2562 Minifigure, Weapon Gun, Pirate Flintlock Pistol
Comments from Submitter:
I have deleted my earlier change request to submit this one, which I feel is more correct. I remember 1977_mauro as someone who was opening sealed sets and making some change requests, and so the part that I am deleting from this inventory I am adding as an extra part.
Brown Pirate Flintlock Pistol locations in instructions:
Page 3 : x1
Page 20: x3
|
|
| Author: | WilliamRaine | | Posted: | Mar 23, 2020 20:50 | | Subject: | Inventory Change Request for Set 6285-1 | | Viewed: | 22 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 3024 Black Plate 1 x 1 (Extra)
* Delete 1 Part 3023 Black Plate 1 x 2 (Extra)
* Add 1 Part 2562 Brown Minifigure, Weapon Gun, Pirate Flintlock Pistol (Extra)
* Change {11 to 10} Part Black 3024 Plate 1 x 1
* Change {28 to 29} Part Black 3023 Plate 1 x 2
* Change {6 to 5} Part Brown 2562 Minifigure, Weapon Gun, Pirate Flintlock Pistol
Comments from Submitter:
I have deleted my earlier change requests to submit this one, which I feel is more correct. I remember 1977_mauro as someone who was opening sealed sets and making some change requests, and so the parts that I am deleting from this inventory I am also adding as extra parts.
Black Plate 1x1 locations in instructions:
Page 4: x2
Page 10: x4
Page 13: x2
Page 25: x2
Black Plate 1x2 locations in instructions:
Page 4 : x4
Page 7 : x2
Page 9 : x2
Page 10: x2
Page 13: x3
Page 14: x2
Page 17: x2
Page 19: x2
Page 21: x1
Page 23: x2
Page 24: x6
Page 26: x1
Brown Pirate Flintlock Pistol locations in instructions:
Page 27: x2
Page 31: x3
|
|
| Author: | WilliamRaine | | Posted: | Mar 20, 2020 00:00 | | Subject: | Re: Inventory Change Request for Set 6273-1 | | Viewed: | 31 times | | Topic: | Inventories Requests | |
| In Inventories Requests, Turez writes:
| | In Inventories Requests, WilliamRaine writes:
| | Please make changes to the following inventory:
* Change {5 to 4} Part Brown 2562 Minifigure, Weapon Gun, Pirate Flintlock Pistol
Comments from Submitter:
I can only find evidence of 4 of these pistols per the instruction manual. x1 is held by the imperial officer in the boat, and x3 are held by the pirates on the last page of the book.
As well as that, I can only locate x4 on the cover of the manual, x3 in the hands of the figures and x1 attached to the cannon base.
Perhaps the extra pistol is an extra part, though I have no way of knowing as my set is used.
|
The change log shows that the fifth pistol has been added by Mauro (1977_mauro)
so we can be sure that at least some copies came with five pistols. I would suggest
to add it as an extra part, I only count four pistols in the instructions and
on the box photos too.
https://www.bricklink.com/catalogInvChangeItem.asp?itemType=S&itemNo=6273-1&viewDate=Y&viewStatus=1
https://www.bricklink.com/message.asp?ID=1116713
|
I have noticed the same exact thing with the Black Seas Barracuda, an extra pistol
that Mauro added yet has no place in the set. Wasn't he the guy who was opening
sealed sets and building them?
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
)
)
)
)
