Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | 1977_mauro | Posted: | May 6, 2021 07:29 | Subject: | Inventory Change Request for Set 6464-1 | Viewed: | 37 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part 2447 Trans-Light Blue Minifigure, Visor Standard
* Add 4 Part 2447 Trans-Dark Blue Minifigure, Visor Standard (Extra)
Comments from Submitter:
There is no trans-light blue visor but only dark-blue visors, 1 in the minifig, 1 in the set, 4 are extra parts.
|
|
Author: | 1977_mauro | Posted: | May 6, 2021 07:14 | Subject: | Further actions to set 6464 necessary! | Viewed: | 95 times | Topic: | Catalog Requests | For: | Catalog Associate | Status: | Already Exists | |
| Hi,
I have made a change request for the changes.
Nevertheless, two things are still incorrect.
1. These parts came assembled as well but there is no such a assembled part in
the BL catalogue
and
2. One of the minifigs is incorrect as well. There are no 4 times black legs
but only 3 black legs and 1 x light gray legs.
The wrong minifig is this one:
In the instruction it has light gray legs.
Best regards
Mauro
|
|
Author: | 1977_mauro | Posted: | May 6, 2021 07:05 | Subject: | Inventory Change Request for Set 6464-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part x39c01 Black Door 1 x 4 x 6 with 3 Panes with Trans-Light Blue Glass
* Delete 1 Part 30179 Red Door, Frame 1 x 4 x 6 with Four Holes on Top and Bottom
* Delete 1 Part 4208 Black String Reel 2 x 4 x 2 Drum
* Delete 1 Part 194cx2 Light Gray Minifigure, Utensil Hose Nozzle Simple with 35L Black String
* Add 1 Part 4208c01 Black String Reel 2 x 4 x 2 Drum with Light Gray Minifigure, Utensil Hose Nozzle Simple with 35L Black String (4208 / 194cx2)
* Change 6 Part White {4623 Plate, Modified 1 x 2 with Bar Arm Up (Undetermined Horizontal Arm Length) to 4623a Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 6mm)}
* Change 1 Part Red 30179c03 Door, Frame 1 x 4 x 6 with Four Holes on Top and Bottom with Black Door 1 x 4 x 6 with 3 Panes with Trans-Light Blue Glass (30179 / x39c01) {Counterpart to Regular}
Comments from Submitter:
From a selaed set. Several parts came already assembled!
|
|
Author: | 1977_mauro | Posted: | May 6, 2021 03:03 | Subject: | Inventory Change Request for Set 7469-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 7 Part 4032 White Plate, Round 2 x 2 with Axle Hole (Alternate) (match ID 1)
* Change 7 Part White 4032b Plate, Round 2 x 2 with Axle Hole (x Shape) {match ID 0 to 1}
Comments from Submitter:
From a sealed set - all parts were 4032.
|
|
Author: | 1977_mauro | Posted: | Apr 19, 2021 12:50 | Subject: | Inventory Change Request for Set 9389-1 | Viewed: | 17 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 4 Part 3957b Blue Antenna 4H - Flat Top (Alternate) (match ID 1)
* Add 4 Part 30237b Light Bluish Gray Brick, Modified 1 x 2 with Open O Clip Thick (Vertical Grip) (Alternate) (match ID 2)
* Add 4 Part 553c Black Brick, Round 2 x 2 Dome Top - Hollow Stud with Bottom Axle Holder x Shape + Orientation (Alternate) (match ID 3)
* Add 8 Part 3626cpb0628 Yellow Minifigure, Head Black Eyebrows, Thin Grin, Black Eyes with White Pupils Pattern - Hollow Stud (Alternate) (match ID 4)
* Add 8 Part 3626cpb0629 Yellow Minifigure, Head Female with Black Thin Eyebrows, Eyelashes, White Pupils and Red Lips Smile Pattern - Hollow Stud (Alternate) (match ID 5)
* Add 6 Part 4865b Yellow Panel 1 x 2 x 1 with Rounded Corners (Alternate) (match ID 6)
* Add 4 Part 87552 Trans-Clear Panel 1 x 2 x 2 with Side Supports - Hollow Studs (Alternate) (match ID 7)
* Add 5 Part 15456 Light Bluish Gray Plate, Modified 2 x 2 with Tow Ball and Hole (Alternate) (match ID 8)
* Add 2 Part 14769pb011 Yellow Tile, Round 2 x 2 with Bottom Stud Holder with Pizza Pattern (Alternate) (match ID 9)
* Add 2 Part 14181 White Wedge, Plate 4 x 9 with Stud Notches (Alternate) (match ID 10)
* Add 12 Part 34337 Light Bluish Gray Wheel 8mm D. x 6mm with Slot (Alternate) (match ID 11)
* Add 28 Part 34337 White Wheel 8mm D. x 6mm with Slot (Alternate) (match ID 12)
* Change 4 Part Tan {3794 Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Bottom Type) to 15573 Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)}
* Change 4 Part Blue 3957 Antenna 4H - Round Top {match ID 0 to 1}
* Change 4 Part Light Bluish Gray 30237 Brick, Modified 1 x 2 with Clip (Vertical Grip) {match ID 0 to 2}
* Change 4 Part Black 553b Brick, Round 2 x 2 Dome Top - Blocked Open Stud with Bottom Axle Holder x Shape + Orientation {match ID 0 to 3}
* Change 8 Part Yellow 3626bpb0628 Minifigure, Head Black Eyebrows, Thin Grin, Black Eyes with White Pupils Pattern - Blocked Open Stud {match ID 0 to 4}
* Change 8 Part Yellow 3626bpb0629 Minifigure, Head Female with Black Thin Eyebrows, Eyelashes, White Pupils and Red Lips Smile Pattern - Blocked Open Stud {match ID 0 to 5}
* Change 6 Part Yellow 4865 Panel 1 x 2 x 1 {match ID 0 to 6}
* Change 4 Part Trans-Clear 4864b Panel 1 x 2 x 2 - Hollow Studs {match ID 0 to 7}
* Change 5 Part Light Bluish Gray 3731 Plate, Modified 2 x 2 with Tow Ball {match ID 0 to 8}
* Change 2 Part Yellow 4150p02 Tile, Round 2 x 2 with Pizza Pattern {match ID 0 to 9}
* Change 2 Part White 2413 Wedge, Plate 4 x 9 without Stud Notches {match ID 0 to 10}
* Change 12 Part Light Bluish Gray 4624 Wheel 8mm D. x 6mm {match ID 0 to 11}
* Change 28 Part White 4624 Wheel 8mm D. x 6mm {match ID 0 to 12}
Comments from Submitter:
Parted out 2 sealed sets - both had the alternative versions.
|
|
Author: | 1977_mauro | Posted: | Mar 15, 2021 11:32 | Subject: | Inventory Change Request for Set 10237-1 | Viewed: | 26 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 13349 Reddish Brown Wedge 4 x 4 Triple Inverted with Connections between 4 Studs (Alternate) (match ID 12)
* Change 2 Part Reddish Brown 4855 Wedge 4 x 4 Triple Inverted with Connections between 2 Studs {match ID 0 to 12}
Comments from Submitter:
Also here, in 1 of 2 sealed sets the newer version was found.
|
Author: | 1977_mauro | Posted: | Mar 15, 2021 11:29 | Subject: | Re: Inventory Change Request for Set 10237-1 | Viewed: | 20 times | Topic: | Inventories Requests | |
| Small correction:
| Parted out 2 sets. In one of them old version was included for 3 of 5 bricks.
|
|
Author: | 1977_mauro | Posted: | Mar 15, 2021 10:19 | Subject: | Inventory Change Request for Set 10237-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 5 Part 57909 Dark Brown Technic, Brick Modified 2 x 2 with Ball Joint and Axle Hole (Alternate) (match ID 11)
* Change 5 Part Dark Brown 57909b Technic, Brick Modified 2 x 2 with Ball Joint and Axle Hole with 6 Holes in Ball {match ID 0 to 11}
Comments from Submitter:
Parted out 2 sets. In one of them old version was included for all bricks.
|
|
Author: | 1977_mauro | Posted: | Mar 9, 2021 06:32 | Subject: | Inventory Change Request for Set 75936-1 | Viewed: | 28 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 4 Part 28802 Reddish Brown Bracket 1 x 2 - 1 x 4 with Two Rounded Corners at the Bottom (Alternate) (match ID 1)
* Change 4 Part Reddish Brown 2436b Bracket 1 x 2 - 1 x 4 with Rounded Corners {match ID 0 to 1}
Comments from Submitter:
Parted out 2 sealed sets. Both had the alternate one.
|
|
Author: | 1977_mauro | Posted: | Mar 6, 2021 03:20 | Subject: | Inventory Change Request for Set 79016-1 | Viewed: | 27 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 13349 Reddish Brown Wedge 4 x 4 Triple Inverted with Connections between 4 Studs (Alternate) (match ID 2)
* Change 2 Part Reddish Brown 4855 Wedge 4 x 4 Triple Inverted with Connections between 2 Studs {match ID 0 to 2}
Comments from Submitter:
Parted out 10 sealed sets, ALL had the newer version.
The question is, if this set really exists with the old version.
|
|
Author: | 1977_mauro | Posted: | Mar 3, 2021 10:54 | Subject: | Inventory Change Request for Set 79010-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 10 Part 3684 Dark Bluish Gray Slope 75 2 x 2 x 3 (Undetermined Stud Type) (match ID 4)
* Add 2 Part 10247 Dark Bluish Gray Plate, Modified 2 x 2 with Pin Hole - Full Cross Support Underneath (Alternate) (match ID 4)
* Change 10 Part Dark Bluish Gray 3684c Slope 75 2 x 2 x 3 - Solid Studs {Alternate to Regular} {match ID 4 to 0}
* Change 2 Part Dark Bluish Gray 2444 Plate, Modified 2 x 2 with Pin Hole {match ID 0 to 4}
Comments from Submitter:
Parted out 6 sealed sets. Only 3684c found. For this reason we can remove the undertermined entry.
Only in 2 of the 6 sets 2444 was found, the rest has included 10247 instead.
|
|
Author: | 1977_mauro | Posted: | Feb 22, 2021 13:02 | Subject: | Inventory Change Request for Set 79015-1 | Viewed: | 25 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Dark Bluish Gray {3794 Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Bottom Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)} (Alternate) {match ID 1 to 1}
Comments from Submitter:
Parted out 11 sealed sets. 7 of them had 3794a, 4 had 3794b.
|
|
Author: | 1977_mauro | Posted: | Feb 18, 2021 13:35 | Subject: | Inventory Change Request for Set 79013-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 4 Part Dark Bluish Gray {3794 Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Bottom Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)} (Alternate)
* Change 2 Part Dark Tan {3794 Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Bottom Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)} (Alternate)
Comments from Submitter:
Parted out 7 sealed sets. In 5 of them only 3794b was found. In 2 a mix of 3794a and 3794b was found for both colors.
|
|
Author: | 1977_mauro | Posted: | Feb 16, 2021 02:20 | Subject: | Inventory Change Request for Set 7709-1 | Viewed: | 29 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 8 Part 3049b Black Slope 45 2 x 1 Double / Inverted - without Bottom Tube or Bottom Stud Holder (Alternate) (match ID 10)
* Add 14 Part 32064c Black Technic, Brick 1 x 2 with Axle Hole (+ Shape) and Inside Side Supports (Alternate) (match ID 4)
* Change 4 Part Light Bluish Gray {4623 Plate, Modified 1 x 2 with Bar Arm Up (Undetermined Horizontal Arm Length) to 4623a Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 6mm)}
* Change 8 Part Black 3049c Slope 45 2 x 1 Double / Inverted - with Bottom Stud Holder {match ID 0 to 10}
Comments from Submitter:
From a sealed set. Regarding 32064c - in my set there was a mix of 15 x 32064b and 14 x 32064c.
-- the question is if the set really came with the part 32064 which is already there as alternate part
|
|
Author: | 1977_mauro | Posted: | Feb 7, 2021 02:08 | Subject: | Re: Inventory Change Request for Set 7707-1 | Viewed: | 15 times | Topic: | Inventories Requests | |
| I cannot make an alternate entry for a minifig.
Does it mean that totally new entries have to be made because of the one different
entry?
Mauro
In Inventories Requests, 1977_mauro writes:
| Please make changes to the following inventory:
* Add 4 Part 48729b Dark Bluish Gray Bar 1L with Clip Mechanical Claw, Cut Edges and Hole on Side (Alternate) (match ID 3)
* Change 2 Part Dark Bluish Gray {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End and 9 Teeth with Bottom Groove}
* Change 4 Part Dark Bluish Gray 48729 Bar 1L with Clip Mechanical Claw {match ID 0 to 3}
Comments from Submitter:
From a sealed set. I will update the minifigs as well because they also include 48729b.
|
|
|
Author: | 1977_mauro | Posted: | Feb 7, 2021 02:05 | Subject: | Inventory Change Request for Set 7707-1 | Viewed: | 25 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 4 Part 48729b Dark Bluish Gray Bar 1L with Clip Mechanical Claw, Cut Edges and Hole on Side (Alternate) (match ID 3)
* Change 2 Part Dark Bluish Gray {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End and 9 Teeth with Bottom Groove}
* Change 4 Part Dark Bluish Gray 48729 Bar 1L with Clip Mechanical Claw {match ID 0 to 3}
Comments from Submitter:
From a sealed set. I will update the minifigs as well because they also include 48729b.
|
|
Author: | 1977_mauro | Posted: | Feb 4, 2021 11:11 | Subject: | Inventory Change Request for Set 7697-1 | Viewed: | 14 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 32064c Dark Bluish Gray Technic, Brick 1 x 2 with Axle Hole (+ Shape) and Inside Side Supports (Alternate) (match ID 2)
* Change 1 Part Dark Bluish Gray 32064b Technic, Brick 1 x 2 with Axle Hole (x Shape) {match ID 0 to 2}
|
|
Author: | 1977_mauro | Posted: | Feb 4, 2021 07:56 | Subject: | Inventory Change Request for Set 7697-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 4 Part Black {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (Undetermined Type) to 44301a Hinge Plate 1 x 2 Locking with 1 Finger On End with Bottom Groove}
* Change 5 Part Light Bluish Gray {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End and 9 Teeth with Bottom Groove}
Comments from Submitter:
From a sealed set.
|
|
Author: | 1977_mauro | Posted: | Feb 3, 2021 01:43 | Subject: | Inventory Change Request for Set 4217-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part 600 White Door 1 x 6 x 6 FreeStyle
* Delete 1 Part 6235 Red Door, Frame 2 x 6 x 6 FreeStyle
* Add 1 Part 6235c01 Red Door, Frame 2 x 6 x 6 FreeStyle with White Door 1 x 6 x 6 Freestyle (6235 / 600)
* Delete 2 Part 601 White Pane for Window 2 x 6 x 6 FreeStyle
* Delete 1 Part 6236 Red Window 2 x 6 x 6 FreeStyle
* Add 1 Part 6236c01 Red Window 2 x 6 x 6 FreeStyle with 2 White Pane for Window 2 x 6 x 6 FreeStyle (6236 / 601)
* Delete 1 Part 30076 Red Brick, Modified 4 x 10 with 4 Pins
* Delete 4 Part 3483 Black Tire 24mm D. x 8mm Offset Tread - Interior Ridges
* Delete 4 Part 6248 Yellow Wheel FreeStyle with Technic Pin Hole
* Delete 4 Part 6248c01 Yellow Wheel FreeStyle with Technic Pin Hole with Black Tire 24mm D. x 8mm Offset Tread - Interior Ridges (6248 / 3483) (Counterpart)
* Add 1 Part 30076c01 Red Brick, Modified 4 x 10 with 4 Pins with Yellow Wheels FreeStyle with Technic Pin Hole and Black Tires 24mm D. x 8mm Offset Tread (30076 / 6248 / 3483)
Comments from Submitter:
The added parts came all pre-assembled - stand alone parts deleted, counterpart not needed anymore, too.
|
|
Author: | 1977_mauro | Posted: | Feb 2, 2021 23:58 | Subject: | Inventory Change Request for Set 4217-1 | Viewed: | 20 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Red {2352 Windscreen 2 x 4 x 3 Frame - (Undetermined Stud Type) to 2352b Windscreen 2 x 4 x 3 Frame - Hollow Studs}
Comments from Submitter:
From a sealed set.
|
|
Author: | 1977_mauro | Posted: | Jan 6, 2021 12:30 | Subject: | Inventory Change Request for Set 79008-1 | Viewed: | 28 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 23 Part Reddish Brown {3794 Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Bottom Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)} (Alternate) {match ID 2 to 2}
Comments from Submitter:
Parted out 3 sealed sets. In one of them there were 8 x 3794a in reddish brown (other 15 were 3794b)
|
|
Author: | 1977_mauro | Posted: | Jan 6, 2021 03:09 | Subject: | Re: Stable content of set 4562 | Viewed: | 20 times | Topic: | Catalog | |
| I see it in the same way, it does not make any sense to provide a inventory for
that.
Cheers
Mauro
In Catalog, randyf writes:
| These sets are not easy to deal with, and having inventories for them at all
may have been a bad decision originally due to their inherent nature of being
"floor sweepings" sets. Do not expect a fast turnaround on something like this.
Cheers,
Randy
In Catalog, 1977_mauro writes:
| No remarks so far from anyone?
In Catalog, 1977_mauro writes:
| Hi all,
I have parted out this sealed set:
The content described as stable was not really matching my content.
When I count the regular bricks in this set in the BrickLink inventory then I
can see 208 parts. It should be 200, not more. But when I exclude the 4 lots
that were not included in my content then I will come to around 192 - 196.
I don't know if it would make sense to remove the 4 items from regular to
extra section. Then we would have not all regular items included but at least
we would really know for sure that the parts in the regular section are the correct
ones.
Mauro
P.S. I have found around 20 - 25 extra lots (mostly items already mentioned in
this section but in a different color). I don't think that this makes really
sense to include them as it seems that they have put into the extra section everything
they have found in their factory.
|
|
|
|
|
Author: | 1977_mauro | Posted: | Jan 6, 2021 00:24 | Subject: | Re: Stable content of set 4562 | Viewed: | 20 times | Topic: | Catalog | |
| No remarks so far from anyone?
In Catalog, 1977_mauro writes:
| Hi all,
I have parted out this sealed set:
The content described as stable was not really matching my content.
When I count the regular bricks in this set in the BrickLink inventory then I
can see 208 parts. It should be 200, not more. But when I exclude the 4 lots
that were not included in my content then I will come to around 192 - 196.
I don't know if it would make sense to remove the 4 items from regular to
extra section. Then we would have not all regular items included but at least
we would really know for sure that the parts in the regular section are the correct
ones.
Mauro
P.S. I have found around 20 - 25 extra lots (mostly items already mentioned in
this section but in a different color). I don't think that this makes really
sense to include them as it seems that they have put into the extra section everything
they have found in their factory.
|
|
|
Author: | 1977_mauro | Posted: | Jan 6, 2021 00:12 | Subject: | Re: Extra head in 8823? | Viewed: | 19 times | Topic: | Catalog | |
| Hi Randy,
this would be fine.
I have checked these both heads again, this is the correct part number:
Regards
Mauro
In Catalog, randyf writes:
| In Catalog, 1977_mauro writes:
| I have parted 4 weeks ago this set:
and found this extra head:
I was pretty sure that this was packed by a mistake into this set.
Today I opened another one with the same extra head included.
Shoul I add it as an extra part?
|
No. I think it is pretty clear that it is a production/packaging error. I can
add a note to the inventory.
Cheers,
Randy
|
|
|
Author: | 1977_mauro | Posted: | Jan 5, 2021 10:55 | Subject: | Extra head in 8823? | Viewed: | 77 times | Topic: | Catalog | Status: | Open | |
| I have parted 4 weeks ago this set:
and found this extra head:
I was pretty sure that this was packed by a mistake into this set.
Today I opened another one with the same extra head included.
Shoul I add it as an extra part?
Mauro
|
|
Author: | 1977_mauro | Posted: | Jan 5, 2021 01:02 | Subject: | Re: Inventory Change Request for Set 7775-1 | Viewed: | 29 times | Topic: | Inventories Requests | |
| I had another look on the technc brick in dark bluish gray.
(I was not able to determine the yellow ones as I have many of them).
Turez is right, it is the C version, I am 99% sure, that this is the case also
for the yellow one.
Mauro
In Inventories Requests, randyf writes:
| In Inventories Requests, Turez writes:
| In Inventories Requests, 1977_mauro writes:
| Please make changes to the following inventory:
* Add 2 Part 48729b Dark Bluish Gray Bar 1L with Clip Mechanical Claw, Cut Edges and Hole on Side (Alternate) (match ID 6)
* Add 1 Part 4079b Blue Minifigure, Utensil Seat (Chair) 2 x 2 with Center Sprue Mark (Alternate) (match ID 7)
* Add 2 Part 4460a Black Slope 75 2 x 1 x 3 - Open Stud (Alternate) (match ID 8)
* Change 20 Part Black {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End and 9 Teeth with Bottom Groove}
* Change 1 Part Yellow {4623 Plate, Modified 1 x 2 with Bar Arm Up (Undetermined Horizontal Arm Length) to 4623a Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 6mm)}
* Change 2 Part Dark Bluish Gray 48729 Bar 1L with Clip Mechanical Claw {match ID 0 to 6}
* Change 1 Part Blue 4079 Minifigure, Utensil Seat (Chair) 2 x 2 {match ID 0 to 7}
* Change 2 Part Black 4460b Slope 75 2 x 1 x 3 - Hollow Stud {match ID 0 to 8}
Comments from Submitter:
From a sealed set.
|
Could you check again the parts with axle hole?
I.e.
The two latter ones might be 32064c.
|
I already did this and have all the answers.
|
|
|
Author: | 1977_mauro | Posted: | Jan 4, 2021 12:42 | Subject: | Stable content of set 4562 | Viewed: | 77 times | Topic: | Catalog | Status: | Open | |
| Hi all,
I have parted out this sealed set:
The content described as stable was not really matching my content.
When I count the regular bricks in this set in the BrickLink inventory then I
can see 208 parts. It should be 200, not more. But when I exclude the 4 lots
that were not included in my content then I will come to around 192 - 196.
I don't know if it would make sense to remove the 4 items from regular to
extra section. Then we would have not all regular items included but at least
we would really know for sure that the parts in the regular section are the correct
ones.
Mauro
P.S. I have found around 20 - 25 extra lots (mostly items already mentioned in
this section but in a different color). I don't think that this makes really
sense to include them as it seems that they have put into the extra section everything
they have found in their factory.
|
|
Author: | 1977_mauro | Posted: | Jan 3, 2021 12:48 | Subject: | Inventory Change Request for Set 7775-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 30090 Trans-Light Blue Minifigure, Visor Scuba Diver Mask (Extra)
|
|
Author: | 1977_mauro | Posted: | Jan 3, 2021 12:20 | Subject: | Inventory Change Request for Set 7775-1 | Viewed: | 24 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 48729b Dark Bluish Gray Bar 1L with Clip Mechanical Claw, Cut Edges and Hole on Side (Alternate) (match ID 6)
* Add 1 Part 4079b Blue Minifigure, Utensil Seat (Chair) 2 x 2 with Center Sprue Mark (Alternate) (match ID 7)
* Add 2 Part 4460a Black Slope 75 2 x 1 x 3 - Open Stud (Alternate) (match ID 8)
* Change 20 Part Black {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End and 9 Teeth with Bottom Groove}
* Change 1 Part Yellow {4623 Plate, Modified 1 x 2 with Bar Arm Up (Undetermined Horizontal Arm Length) to 4623a Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 6mm)}
* Change 2 Part Dark Bluish Gray 48729 Bar 1L with Clip Mechanical Claw {match ID 0 to 6}
* Change 1 Part Blue 4079 Minifigure, Utensil Seat (Chair) 2 x 2 {match ID 0 to 7}
* Change 2 Part Black 4460b Slope 75 2 x 1 x 3 - Hollow Stud {match ID 0 to 8}
Comments from Submitter:
From a sealed set.
|
|
Author: | 1977_mauro | Posted: | Dec 31, 2020 05:08 | Subject: | Re: Inventory Change Request for Set 4518-1 | Viewed: | 15 times | Topic: | Inventories Requests | |
| P.S. It is also NOT bright light orange. I have checked this now in addition.
In Inventories Requests, 1977_mauro writes:
| Hi Randy,
I post here 2 photos:
1. The first one shows this part next to my LEGO color collage - the bricks are
behind a glass wall.
2. The second one shows this part in orange, medium orange (from a different
set) and then the light orange (from the 4518 set).
As you can see, the part in this set is not medium orange.
Best regards
Mauro
In Inventories Requests, randyf writes:
| In Inventories Requests, 1977_mauro writes:
| Please make changes to the following inventory:
* Add 1 Part 553b Black Brick, Round 2 x 2 Dome Top - Blocked Open Stud with Bottom Axle Holder x Shape + Orientation (Alternate) (match ID 3)
* Change 1 Part Black 553a Brick, Round 2 x 2 Dome Top - Blocked Open Stud without Bottom Axle Holder {match ID 0 to 3}
* Change 1 Part {Medium Orange to Light Orange} 4150 Tile, Round 2 x 2
Comments from Submitter:
I have parted out 2 of them, in both sets there was 1 round tile 2 x 2 in LIGHT orange and not in MEDIUM orange. I had already this part in medium orange and it is darker. I have compared it to my other parts in light orange and they match each other.
|
Please post an image of the tile next to a known Light Orange part. This is a
rare color, so I want to be sure.
Thanks,
Randy
|
|
|
|
Author: | 1977_mauro | Posted: | Dec 31, 2020 05:04 | Subject: | Re: Inventory Change Request for Set 4518-1 | Viewed: | 27 times | Topic: | Inventories Requests | |
| Hi Randy,
I post here 2 photos:
1. The first one shows this part next to my LEGO color collage - the bricks are
behind a glass wall.
2. The second one shows this part in orange, medium orange (from a different
set) and then the light orange (from the 4518 set).
As you can see, the part in this set is not medium orange.
Best regards
Mauro
In Inventories Requests, randyf writes:
| In Inventories Requests, 1977_mauro writes:
| Please make changes to the following inventory:
* Add 1 Part 553b Black Brick, Round 2 x 2 Dome Top - Blocked Open Stud with Bottom Axle Holder x Shape + Orientation (Alternate) (match ID 3)
* Change 1 Part Black 553a Brick, Round 2 x 2 Dome Top - Blocked Open Stud without Bottom Axle Holder {match ID 0 to 3}
* Change 1 Part {Medium Orange to Light Orange} 4150 Tile, Round 2 x 2
Comments from Submitter:
I have parted out 2 of them, in both sets there was 1 round tile 2 x 2 in LIGHT orange and not in MEDIUM orange. I had already this part in medium orange and it is darker. I have compared it to my other parts in light orange and they match each other.
|
Please post an image of the tile next to a known Light Orange part. This is a
rare color, so I want to be sure.
Thanks,
Randy
|
|
|
|
Author: | 1977_mauro | Posted: | Dec 31, 2020 04:25 | Subject: | Inventory Change Request for Set 4518-1 | Viewed: | 42 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 553b Black Brick, Round 2 x 2 Dome Top - Blocked Open Stud with Bottom Axle Holder x Shape + Orientation (Alternate) (match ID 3)
* Change 1 Part Black 553a Brick, Round 2 x 2 Dome Top - Blocked Open Stud without Bottom Axle Holder {match ID 0 to 3}
* Change 1 Part {Medium Orange to Light Orange} 4150 Tile, Round 2 x 2
Comments from Submitter:
I have parted out 2 of them, in both sets there was 1 round tile 2 x 2 in LIGHT orange and not in MEDIUM orange. I had already this part in medium orange and it is darker. I have compared it to my other parts in light orange and they match each other.
|
|
Author: | 1977_mauro | Posted: | Dec 26, 2020 05:54 | Subject: | Inventory Change Request for Set 79007-1 | Viewed: | 28 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 14769 Black Tile, Round 2 x 2 with Bottom Stud Holder (Alternate) (match ID 6)
* Change 1 Part Black 4150 Tile, Round 2 x 2 {match ID 0 to 6}
Comments from Submitter:
Parted out 2 sealed sets - one of them had teh alternate part included.
|
|
Author: | 1977_mauro | Posted: | Dec 25, 2020 02:07 | Subject: | Inventory Change Request for Set 9472-1 | Viewed: | 17 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 4497 Pearl Dark Gray Minifigure, Weapon Pike / Spear - Round End (Alternate) (match ID 6)
* Change 1 Part Pearl Dark Gray 93789 Minifigure, Weapon Pike / Spear - Flat End {match ID 0 to 6}
Comments from Submitter:
From sealed sets. Several appearance of the alternate part.
As the existing part is also listed as an extra part in addition, should I add to it the Match ID 6 as well and increase the quantity of the alternate part to 2?
|
|
Author: | 1977_mauro | Posted: | Dec 20, 2020 15:29 | Subject: | Re: Inventory Change Request for Set 6435-1 | Viewed: | 23 times | Topic: | Inventories Requests | |
| Even better... 😄
In Inventories Requests, randyf writes:
| In Inventories Requests, 1977_mauro writes:
| Please make changes to the following inventory:
* Add 1 Minifig res012a Coast Guard City Center - White Collar & Arms, Yellow Legs with Black Hips, White Helmet, Light Gray Scuba Tank, Sunglasses (match ID 1)
* Change 1 Minifig res012 Coast Guard City Center - White Collar & Arms, Yellow Legs with Black Hips, White Helmet, Scuba Tank, Sunglasses {Regular to Alternate} {match ID 0 to 1}
Comments from Submitter:
I have added the new real minifig to this set - it should be added as regular and the incorrect one should be marked for deletion and changed to an alternative.
|
The incorrect one should no longer be in the inventory.
|
|
|
Author: | 1977_mauro | Posted: | Dec 20, 2020 13:59 | Subject: | Inventory Change Request for Set 6435-1 | Viewed: | 27 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Minifig res012a Coast Guard City Center - White Collar & Arms, Yellow Legs with Black Hips, White Helmet, Light Gray Scuba Tank, Sunglasses (match ID 1)
* Change 1 Minifig res012 Coast Guard City Center - White Collar & Arms, Yellow Legs with Black Hips, White Helmet, Scuba Tank, Sunglasses {Regular to Alternate} {match ID 0 to 1}
Comments from Submitter:
I have added the new real minifig to this set - it should be added as regular and the incorrect one should be marked for deletion and changed to an alternative.
|
|
Author: | 1977_mauro | Posted: | Dec 20, 2020 06:26 | Subject: | Inventory Change Request for Set 79001-1 | Viewed: | 36 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part 3684c Dark Bluish Gray Slope 75 2 x 2 x 3 - Solid Studs (Alternate) (match ID 5)
* Change 1 Part Dark Bluish Gray {3684 Slope 75 2 x 2 x 3 (Undetermined Stud Type) to 3684c Slope 75 2 x 2 x 3 - Solid Studs} {match ID 5 to 0}
Comments from Submitter:
From a seled set - it does not make any sense to have an undetermined entry as a regular one and a real one as an alrternative.
|
|
Author: | 1977_mauro | Posted: | Dec 20, 2020 04:32 | Subject: | Re: Inventory Change Request for Minifig res012 | Viewed: | 23 times | Topic: | Inventories Requests | |
| Done!
In Inventories Requests, randyf writes:
| In Inventories Requests, 1977_mauro writes:
| I have added res012a to the catalogue.
I can make a picture if required - I have not seen where I can add one during
adding the minifig.
|
An image for the new figure will be required.
Since the site is pretty archaic in how it handles submissions to the catalog,
you have to submit an image for a new item using a separate form *after* the
information for the new item has already been submitted.
You can add an image for the figure here using res012a as the item number:
https://www.bricklink.com/v2/catalog/catalogImageAdd.page?itemType=M
Cheers,
Randy
|
|
|
Author: | 1977_mauro | Posted: | Dec 20, 2020 03:54 | Subject: | Re: Inventory Change Request for Minifig res012 | Viewed: | 20 times | Topic: | Inventories Requests | |
| I have added res012a to the catalogue.
I can make a picture if required - I have not seen where I can add one during
adding the minifig.
regards
Mauro
In Inventories Requests, randyf writes:
| In Inventories Requests, 1977_mauro writes:
| Please make changes to the following inventory:
* Change 1 Part {White to Light Gray} 30091 Minifigure, Scuba Tank
Comments from Submitter:
From a sealed set. The pictures on the box and in the instruction clearly show that this part is in light gray and not in white.
|
Since this minifigure has been in the catalog for almost 15 years with an incorrect
inventory and there are items for sale, it would be best to submit a new minifigure
with the correct image and the correct inventory that can be substituted into
the set inventory and then mark this one for deletion. Please submit the minifigure
to the catalog as res012a.
Cheers,
Randy
|
|
|
Author: | 1977_mauro | Posted: | Dec 19, 2020 08:11 | Subject: | Inventory Change Request for Set 6435-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 2447 Trans-Dark Blue Minifigure, Visor Standard (Extra)
* Add 1 Part 30090 Trans-Dark Blue Minifigure, Visor Scuba Diver Mask (Extra)
* Change 7 Part Light Gray {4623 Plate, Modified 1 x 2 with Bar Arm Up (Undetermined Horizontal Arm Length) to 4623a Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 6mm)}
Comments from Submitter:
From a sealed set.
|
|
Author: | 1977_mauro | Posted: | Dec 19, 2020 08:08 | Subject: | Inventory Change Request for Minifig res012 | Viewed: | 32 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part {White to Light Gray} 30091 Minifigure, Scuba Tank
Comments from Submitter:
From a sealed set. The pictures on the box and in the instruction clearly show that this part is in light gray and not in white.
|
|
Author: | 1977_mauro | Posted: | Dec 14, 2020 05:18 | Subject: | Inventory Change Request for Set 79003-1 | Viewed: | 31 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 5 Part Reddish Brown {3794 Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Bottom Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)} (Alternate)
Comments from Submitter:
From a sealed set. I change her ethe alternate entry as it has an undertermined version.
|
|
Author: | 1977_mauro | Posted: | Dec 12, 2020 05:45 | Subject: | Inventory Change Request for Set 9469-1 | Viewed: | 20 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Reddish Brown {3794 Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Bottom Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
All sealed and from different sources, all 5 sets had the first version included. I change the regular entry as it is currently an undetermined one anyway.
|
|
Author: | 1977_mauro | Posted: | Dec 11, 2020 03:39 | Subject: | Re: Inventory Change Request for Set 7905-1 | Viewed: | 20 times | Topic: | Inventories Requests | |
| Makes sense. But why has been the undertermined version of this part removed
even it was not clear which version has been used in some sets?
For other cases an undetermined entry still exists and will be only removed when
the correct version in all sets has been determined.
Cheers
Mauro
In Inventories Requests, randyf writes:
| In Inventories Requests, 1977_mauro writes:
| Please make changes to the following inventory:
* Add 1 Part 4032b Dark Bluish Gray Plate, Round 2 x 2 with Axle Hole - X Opening (Alternate) (match ID 6)
* Change 1 Part Dark Bluish Gray 4032 Plate, Round 2 x 2 with Axle Hole {match ID 0 to 6}
Comments from Submitter:
From a sealed set.
|
The 4032/4032b is an improperly split variant. Due to this, the 4032 currently
in this set is masquerading as an undetermined entry. Since you have definitive
proof here of 4032b in this set, I will make the 4032b the regular item and remove
the 4032 entry.
Cheers,
Randy
|
|
|
Author: | 1977_mauro | Posted: | Dec 10, 2020 12:02 | Subject: | Re: Inventory Change Request for Set 7905-1 | Viewed: | 21 times | Topic: | Inventories Requests | |
| You are right...:
https://www.bricklink.com/message.asp?ID=1238469
In Inventories Requests, Turez writes:
| In Inventories Requests, 1977_mauro writes:
| Please make changes to the following inventory:
* Add 1 Part 4151b Black Plate, Modified 8 x 8 with Grille and Hole in Center (Alternate) (match ID 5)
* Change 1 Part Black 4151 Plate, Modified 8 x 8 with Grille {match ID 0 to 5}
Comments from Submitter:
From a sealed set.
|
Which axle hole type has this part
from your set?
+ opening or X opening?
|
|
|
Author: | 1977_mauro | Posted: | Dec 10, 2020 12:02 | Subject: | Inventory Change Request for Set 7905-1 | Viewed: | 26 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 4032b Dark Bluish Gray Plate, Round 2 x 2 with Axle Hole - X Opening (Alternate) (match ID 6)
* Change 1 Part Dark Bluish Gray 4032 Plate, Round 2 x 2 with Axle Hole {match ID 0 to 6}
Comments from Submitter:
From a sealed set.
|
Author: | 1977_mauro | Posted: | Dec 10, 2020 10:27 | Subject: | Inventory Change Request for Set 7905-1 | Viewed: | 32 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 4151b Black Plate, Modified 8 x 8 with Grille and Hole in Center (Alternate) (match ID 5)
* Change 1 Part Black 4151 Plate, Modified 8 x 8 with Grille {match ID 0 to 5}
Comments from Submitter:
From a sealed set.
|
|
Author: | 1977_mauro | Posted: | Nov 18, 2020 02:12 | Subject: | Inventory Change Request for Set 7898-1 | Viewed: | 24 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 61252 Light Bluish Gray Plate, Modified 1 x 1 with Open O Clip (Horizontal Grip) (Alternate) (match ID 12)
* Change 2 Part Light Bluish Gray 6019 Plate, Modified 1 x 1 with U Clip (Horizontal Grip) {match ID 0 to 12}
Comments from Submitter:
From a sealed super city pack 66325 which included the 7898 train.
The same parts in yellow had the old U clip.
|
|
Author: | 1977_mauro | Posted: | Nov 7, 2020 11:58 | Subject: | Inventory Change Request for Set 10271-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 6 Part 44567b Dark Bluish Gray Hinge Plate 1 x 2 Locking with 1 Finger on Side without Bottom Groove (Alternate) (match ID 1)
* Change 6 Part Dark Bluish Gray 44567a Hinge Plate 1 x 2 Locking with 1 Finger on Side with Bottom Groove {match ID 0 to 1}
Comments from Submitter:
Parted out 3 sealed sets. In 2 of these sets the alternate part was found only, during in the last one there was a mix of 5 regular and one alternate parts.
|
|
Author: | 1977_mauro | Posted: | Nov 4, 2020 09:51 | Subject: | Inventory Change Request for Set 7897-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part Black {44302b Hinge Plate 1 x 2 Locking with 2 Fingers on End and 9 Teeth without Bottom Groove to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End and 9 Teeth with Bottom Groove}
Comments from Submitter:
Sorry, I made a mistake two hours ago regarding this specific part - it has bottom groove, was not able to see it in my dark room.
I have now chenged it accordingly.
|
|
Author: | 1977_mauro | Posted: | Nov 4, 2020 08:13 | Subject: | Inventory Change Request for Set 7897-1 | Viewed: | 30 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 61252 White Plate, Modified 1 x 1 with Open O Clip (Horizontal Grip) (Alternate) (match ID 6)
* Change 1 Part White 6019 Plate, Modified 1 x 1 with U Clip (Horizontal Grip) {match ID 0 to 6}
* Change 2 Part Black {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (Undetermined Type) to 44301a Hinge Plate 1 x 2 Locking with 1 Finger On End with Bottom Groove}
* Change 1 Part Dark Bluish Gray {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (Undetermined Type) to 44301a Hinge Plate 1 x 2 Locking with 1 Finger On End with Bottom Groove}
* Change 2 Part Black {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302b Hinge Plate 1 x 2 Locking with 2 Fingers on End and 9 Teeth without Bottom Groove}
Comments from Submitter:
From a sealed set.
|
|
Author: | 1977_mauro | Posted: | Nov 4, 2020 00:36 | Subject: | Inventory Change Request for Set 10210-1 | Viewed: | 26 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 10 Part 60470b Light Bluish Gray Plate, Modified 1 x 2 with 2 Open O Clips (Horizontal Grip) (Alternate) (match ID 12)
* Change 10 Part Light Bluish Gray 60470 Plate, Modified 1 x 2 with 2 U Clips (Horizontal Grip) {match ID 0 to 12}
Comments from Submitter:
From a sealed set.
|
|
Author: | 1977_mauro | Posted: | Oct 29, 2020 11:11 | Subject: | Inventory Change Request for Set 5370b-1 | Viewed: | 24 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 3035 Dark Gray Plate 4 x 8 (Alternate) (match ID 1)
* Change 1 Part Red 3035 Plate 4 x 8 {match ID 0 to 1}
Comments from Submitter:
From a sealed set and a sealed plybag.
Yes I know that all other gray parts from this set are bluish gray parts - but this one is defintely in the old dark gray color. (Compared to other dark gray plates in my inventory).
|
|
Author: | 1977_mauro | Posted: | Oct 22, 2020 08:53 | Subject: | Inventory Change Request for Set 80104-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 4623b Reddish Brown Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 5mm) (Alternate) (match ID 1)
* Change 1 Part Reddish Brown 4623a Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 6mm) {match ID 0 to 1}
Comments from Submitter:
From a sealed set.
|
|
Author: | 1977_mauro | Posted: | Oct 21, 2020 09:43 | Subject: | Re: Inventory Change Request for Set 21313-1 | Viewed: | 12 times | Topic: | Inventories Requests | |
| I assume that this variant has been noticed several months after introduction...
In Inventories Requests, Stellar writes:
| In Inventories Requests, 1977_mauro writes:
| Please make changes to the following inventory:
* Add 5 Part 28974 Reddish Brown Minifigure, Neck Bracket with Back Stud - Thick Back Wall (Alternate) (match ID 3)
* Change 5 Part Reddish Brown 42446 Minifigure, Neck Bracket with Back Stud - Thin Back Wall {match ID 0 to 3}
Comments from Submitter:
From a sealed set.
|
Today I Learned about this variant...
|
|
|
Author: | 1977_mauro | Posted: | Oct 21, 2020 04:51 | Subject: | Inventory Change Request for Set 21313-1 | Viewed: | 26 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 5 Part 28974 Reddish Brown Minifigure, Neck Bracket with Back Stud - Thick Back Wall (Alternate) (match ID 3)
* Change 5 Part Reddish Brown 42446 Minifigure, Neck Bracket with Back Stud - Thin Back Wall {match ID 0 to 3}
Comments from Submitter:
From a sealed set.
|
Author: | 1977_mauro | Posted: | Oct 20, 2020 14:11 | Subject: | Inventory Change Request for Set 7469-1 | Viewed: | 17 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 7 Part 4032b White Plate, Round 2 x 2 with Axle Hole - X Opening (Alternate) (match ID 1)
* Change 7 Part White 4032 Plate, Round 2 x 2 with Axle Hole {match ID 0 to 1}
Comments from Submitter:
From a sealed set.
|
|
Author: | 1977_mauro | Posted: | Sep 25, 2020 10:47 | Subject: | Inventory Change Request for Set 79016-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part Dark Bluish Gray {3794 Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Bottom Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)} (Alternate)
Comments from Submitter:
From a sealed set.
First, it does not make any sense to offer an alternate part which is undertermined - therefore I am replacing it here with a true alternate part that I have found in this set.
|
|
Author: | 1977_mauro | Posted: | Sep 19, 2020 13:39 | Subject: | Inventory Change Request for Set 9335-1 | Viewed: | 20 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 7 Part 3626bpb0628 Yellow Minifigure, Head Black Eyebrows, Thin Grin, Black Eyes with White Pupils Pattern - Blocked Open Stud (Alternate) (match ID 26)
* Add 7 Part 3626cpb1571 Yellow Minifigure, Head Dual Sided Female Brown Eyebrows, Peach Lips, Pensive Smile / Scared Pattern - Hollow Stud (Alternate) (match ID 27)
* Change 7 Part Yellow 3626bpb0121 Minifigure, Head Brown Eyebrows, Thin Grin, Black Eyes with White Pupils Pattern - Blocked Open Stud {match ID 0 to 26}
* Change 7 Part Yellow 3626cpb0271 Minifigure, Head Dual Sided Female Brown Eyebrows, Scared / Smile Pattern - Hollow Stud {match ID 0 to 27}
Comments from Submitter:
From a sealed set.
|
|
Author: | 1977_mauro | Posted: | Sep 19, 2020 10:04 | Subject: | Re: Inventory Change Request for Set 10261-1 | Viewed: | 22 times | Topic: | Inventories Requests | |
| Might be - extra parts do need to be the same in all sets and they nearly never
are the same...
In Inventories Requests, erikmeijs writes:
| In Inventories Requests, 1977_mauro writes:
| Please make changes to the following inventory:
* Add 1 Part 3024 Trans-Dark Blue Plate 1 x 1 (Extra)
* Change {1 to 2} Part Reddish Brown 24855 Plant Flower Stem with Bottom Pin (Extra)
Comments from Submitter:
From a a sealed set.
|
I have just completed building this set. I was checking the extra items and what
I have matches up with the inventory on Bricklin, with the exception of the two
changes you suggest.
|
|
|
Author: | 1977_mauro | Posted: | Aug 28, 2020 13:07 | Subject: | Inventory Change Request for Set 10261-1 | Viewed: | 26 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 3024 Trans-Dark Blue Plate 1 x 1 (Extra)
* Change {1 to 2} Part Reddish Brown 24855 Plant Flower Stem with Bottom Pin (Extra)
Comments from Submitter:
From a a sealed set.
|
|
Author: | 1977_mauro | Posted: | Aug 11, 2020 08:57 | Subject: | Inventory Change Request for Set 6560-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 5 Part Black {4623 Plate, Modified 1 x 2 with Arm Up (Undetermined Arm Length Type) to 4623a Plate, Modified 1 x 2 with Arm Up (Horizontal Arm Length 6mm)}
* Change 1 Part Black {x77a String, Cord Thin (Undetermined Length Type) to x77ac75 String, Cord Thin 75cm}
Comments from Submitter:
From a sealed set.
|
|
Author: | 1977_mauro | Posted: | Aug 11, 2020 06:39 | Subject: | Inventory Change Request for Set 6441-1 | Viewed: | 30 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 6 Part Blue {4623 Plate, Modified 1 x 2 with Arm Up (Undetermined Arm Length Type) to 4623a Plate, Modified 1 x 2 with Arm Up (Horizontal Arm Length 6mm)}
Comments from Submitter:
From a sealed set.
|
|
Author: | 1977_mauro | Posted: | Aug 11, 2020 06:04 | Subject: | Inventory Change Request for Set 6558-1 | Viewed: | 30 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 3 Part Light Gray {4623 Plate, Modified 1 x 2 with Arm Up (Undetermined Arm Length Type) to 4623a Plate, Modified 1 x 2 with Arm Up (Horizontal Arm Length 6mm)}
* Change 1 Part Black {x77a String, Cord Thin (Undetermined Length Type) to x77ac75 String, Cord Thin 75cm}
Comments from Submitter:
From a sealed set.
|
|
Author: | 1977_mauro | Posted: | Jun 23, 2020 00:41 | Subject: | Inventory Change Request for Set 4548431-1 | Viewed: | 24 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part Red {3044 Slope 45 2 x 1 Double (Undetermined Underside Type) to 3044b Slope 45 2 x 1 Double - with Inside Bar}
Comments from Submitter:
From a sealed set.
|
Author: | 1977_mauro | Posted: | Jun 22, 2020 06:22 | Subject: | Inventory Change Request for Set 7570-1 | Viewed: | 39 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part Light Bluish Gray {2453 Brick 1 x 1 x 5 (Undetermined Stud Type) to 2453a Brick 1 x 1 x 5 - Blocked Open Stud or Hollow Stud}
Comments from Submitter:
From a sealed set.
|
Author: | 1977_mauro | Posted: | May 30, 2020 23:33 | Subject: | Inventory Change Request for Set 6552-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Black {x77a String, Cord Thin (Undetermined Length Type) to x77ac30 String, Cord Thin 30cm}
Comments from Submitter:
From a new set.
|
Author: | 1977_mauro | Posted: | May 1, 2020 04:56 | Subject: | Inventory Change Request for Set 4518-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 4460a Light Gray Slope 75 2 x 1 x 3 - Open Stud (Alternate) (match ID 1)
* Change 2 Part Light Bluish Gray 4460a Slope 75 2 x 1 x 3 - Open Stud {match ID 0 to 1}
Comments from Submitter:
My sealed version came with these 2 parts in old gray.
|
|
Author: | 1977_mauro | Posted: | May 1, 2020 01:04 | Subject: | Inventory Change Request for Set 4518-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 553b Tan Brick, Round 2 x 2 Dome Top - Blocked Open Stud with Bottom Axle Holder x Shape + Orientation
* Change 1 Part Black {553 Brick, Round 2 x 2 Dome Top (Undetermined Stud and Bottom Type) to 553a Brick, Round 2 x 2 Dome Top - Blocked Open Stud without Bottom Axle Holder}
* Change 2 Part Orange {553 Brick, Round 2 x 2 Dome Top (Undetermined Stud and Bottom Type) to 553b Brick, Round 2 x 2 Dome Top - Blocked Open Stud with Bottom Axle Holder x Shape + Orientation}
* Change 2 Part Red {553 Brick, Round 2 x 2 Dome Top (Undetermined Stud and Bottom Type) to 553b Brick, Round 2 x 2 Dome Top - Blocked Open Stud with Bottom Axle Holder x Shape + Orientation}
* Change {2 to 1} Part Tan {553 Brick, Round 2 x 2 Dome Top (Undetermined Stud and Bottom Type) to 553a Brick, Round 2 x 2 Dome Top - Blocked Open Stud without Bottom Axle Holder}
* Change 1 Part Black {3044 Slope 45 2 x 1 Double (Undetermined Underside Type) to 3044b Slope 45 2 x 1 Double - with Inside Bar}
* Change 3 Part White {2453 Brick 1 x 1 x 5 (Undetermined Stud Type) to 2453a Brick 1 x 1 x 5 - Blocked Open Stud or Hollow Stud}
Comments from Submitter:
From a sealed set.
The 2 pieces of 553 in tan came in different variants.
|
|
Author: | 1977_mauro | Posted: | Apr 19, 2020 00:40 | Subject: | Inventory Change Request for Set 4411-1 | Viewed: | 20 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Dark Gray {3049 Slope 45 2 x 1 Double / Inverted (Undetermined Underside Type) to 3049b Slope 45 2 x 1 Double / Inverted - without Bottom Tube or Bottom Stud Holder}
* Change 1 Part White {3049 Slope 45 2 x 1 Double / Inverted (Undetermined Underside Type) to 3049b Slope 45 2 x 1 Double / Inverted - without Bottom Tube or Bottom Stud Holder}
Comments from Submitter:
Checked in 2 sealed sets.
|
|
Author: | 1977_mauro | Posted: | Apr 19, 2020 00:20 | Subject: | Inventory Change Request for Set 3600-1 | Viewed: | 20 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Green {3044 Slope 45 2 x 1 Double (Undetermined Underside Type) to 3044b Slope 45 2 x 1 Double - with Inside Bar}
* Change 2 Part Red {3044 Slope 45 2 x 1 Double (Undetermined Underside Type) to 3044b Slope 45 2 x 1 Double - with Inside Bar}
Comments from Submitter:
From a sealed set.
|
Author: | 1977_mauro | Posted: | Apr 19, 2020 00:13 | Subject: | Inventory Change Request for Set 7795-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part Red {3044 Slope 45 2 x 1 Double (Undetermined Underside Type) to 3044b Slope 45 2 x 1 Double - with Inside Bar}
Comments from Submitter:
From a sealed set.
|
|
Author: | 1977_mauro | Posted: | Mar 22, 2020 07:22 | Subject: | Re: Inventory Change Request for Set 5512-1 | Viewed: | 21 times | Topic: | Inventories Requests | |
| Randy,
you are right, as there was previously no alternate part for the whites, it does
not make sense to add white 3794b as alternate.
Thanks
Mauro
In Inventories Requests, randyf writes:
| In Inventories Requests, 1977_mauro writes:
| Randy, it was not a mistake but I did not want to complicate the inventory change
- as the regular part was already established as an alternate one.
|
But you said *all* of your sets came with *all* white 3794a. If they *all* came
with *all* white 3794a and you didn't get any white 3794b, why would you
ask to add any white 3794b as alternates? It doesn't make sense. There is
no established white 3794a or 3794b in the set, just one undetermined entry that
should just be replaced with what you found. Right?
| But when we get now rid off of the undertermined entries, I would just simly
add my findings as regular ones and fully skip the alternate ones.
Mauro
In Inventories Requests, randyf writes:
| Thanks, Mauro!
So it was a mistake on your part to ask to add 3794b in white as an alternate?
And are we sure we need to keep 3794a in red in the Regular Items section?
Cheers,
Randy
In Inventories Requests, 1977_mauro writes:
| Hi Randy,
in ALL 3 boxes there were the SAME mix up of these parts:
ALL red ones came as 3794b.
ALL white ones came as 3794a.
It seems that this was the standard for these boxes as I have bought all 3 from
different sources.
Regards
Mauro
In Inventories Requests, randyf writes:
| In Inventories Requests, 1977_mauro writes:
| Please make changes to the following inventory:
* Add 2 Part 3794b White Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) (Alternate) (match ID 5)
* Change 2 Part Red {3794 Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Bottom Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 2 Part White {3794 Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Bottom Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)} {match ID 0 to 5}
Comments from Submitter:
From 3 sealed sets, the red part was 3794b, during the white part was 3794b. The undertermined version is not required here anymore.
|
I am sorry if I am still confused by your statements, but can I ask you to just
answer these questions with a 'yes' or 'no'?
Did you find any 3794a in red in any of the three sets you parted
out?
Did you find any 3794b in red in any of the three sets you parted
out?
Did you find any 3794a in white in any of the three sets you parted
out?
Did you find any 3794b in white in any of the three sets you parted
out?
Thanks,
Randy
|
|
|
|
|
|
|
Author: | 1977_mauro | Posted: | Mar 22, 2020 03:50 | Subject: | Re: Inventory Change Request for Set 5512-1 | Viewed: | 24 times | Topic: | Inventories Requests | |
| Randy, it was not a mistake but I did not want to complicate the inventory change
- as the regular part was already established as an alternate one.
But when we get now rid off of the undertermined entries, I would just simly
add my findings as regular ones and fully skip the alternate ones.
Mauro
In Inventories Requests, randyf writes:
| Thanks, Mauro!
So it was a mistake on your part to ask to add 3794b in white as an alternate?
And are we sure we need to keep 3794a in red in the Regular Items section?
Cheers,
Randy
In Inventories Requests, 1977_mauro writes:
| Hi Randy,
in ALL 3 boxes there were the SAME mix up of these parts:
ALL red ones came as 3794b.
ALL white ones came as 3794a.
It seems that this was the standard for these boxes as I have bought all 3 from
different sources.
Regards
Mauro
In Inventories Requests, randyf writes:
| In Inventories Requests, 1977_mauro writes:
| Please make changes to the following inventory:
* Add 2 Part 3794b White Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) (Alternate) (match ID 5)
* Change 2 Part Red {3794 Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Bottom Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 2 Part White {3794 Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Bottom Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)} {match ID 0 to 5}
Comments from Submitter:
From 3 sealed sets, the red part was 3794b, during the white part was 3794b. The undertermined version is not required here anymore.
|
I am sorry if I am still confused by your statements, but can I ask you to just
answer these questions with a 'yes' or 'no'?
Did you find any 3794a in red in any of the three sets you parted
out?
Did you find any 3794b in red in any of the three sets you parted
out?
Did you find any 3794a in white in any of the three sets you parted
out?
Did you find any 3794b in white in any of the three sets you parted
out?
Thanks,
Randy
|
|
|
|
|
Author: | 1977_mauro | Posted: | Mar 22, 2020 03:10 | Subject: | Re: Inventory Change Request for Set 5512-1 | Viewed: | 23 times | Topic: | Inventories Requests | |
| Hi Randy,
in ALL 3 boxes there were the SAME mix up of these parts:
ALL red ones came as 3794b.
ALL white ones came as 3794a.
It seems that this was the standard for these boxes as I have bought all 3 from
different sources.
Regards
Mauro
In Inventories Requests, randyf writes:
| In Inventories Requests, 1977_mauro writes:
| Please make changes to the following inventory:
* Add 2 Part 3794b White Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) (Alternate) (match ID 5)
* Change 2 Part Red {3794 Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Bottom Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 2 Part White {3794 Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Bottom Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)} {match ID 0 to 5}
Comments from Submitter:
From 3 sealed sets, the red part was 3794b, during the white part was 3794b. The undertermined version is not required here anymore.
|
I am sorry if I am still confused by your statements, but can I ask you to just
answer these questions with a 'yes' or 'no'?
Did you find any 3794a in red in any of the three sets you parted
out?
Did you find any 3794b in red in any of the three sets you parted
out?
Did you find any 3794a in white in any of the three sets you parted
out?
Did you find any 3794b in white in any of the three sets you parted
out?
Thanks,
Randy
|
|
|
Author: | 1977_mauro | Posted: | Mar 15, 2020 12:03 | Subject: | Re: Inventory Change Request for Set 5512-1 | Viewed: | 24 times | Topic: | Inventories Requests | |
| Sorry, I mentioned, the white parts were 3794a, not 3794b as the red ones.
In Inventories Requests, 1977_mauro writes:
| Please make changes to the following inventory:
* Add 2 Part 3794b White Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) (Alternate) (match ID 5)
* Change 2 Part Red {3794 Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Bottom Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 2 Part White {3794 Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Bottom Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)} {match ID 0 to 5}
Comments from Submitter:
From 3 sealed sets, the red part was 3794b, during the white part was 3794b. The undertermined version is not required here anymore.
|
|
|
Author: | 1977_mauro | Posted: | Mar 15, 2020 11:12 | Subject: | Inventory Change Request for Set 5512-1 | Viewed: | 37 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 3794b White Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) (Alternate) (match ID 5)
* Change 2 Part Red {3794 Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Bottom Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 2 Part White {3794 Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Bottom Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)} {match ID 0 to 5}
Comments from Submitter:
From 3 sealed sets, the red part was 3794b, during the white part was 3794b. The undertermined version is not required here anymore.
|
|
Author: | 1977_mauro | Posted: | Jan 18, 2020 05:04 | Subject: | Inventory Change Request for Set 10267-1 | Viewed: | 43 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change {3 to 4} Part White 98138pb013 Tile, Round 1 x 1 with Spiral Red Pattern (Extra)
* Change {2 to 3} Part Reddish Brown 98138pb042 Tile, Round 1 x 1 with Tree Stump / Wood Grain Pattern (Extra)
Comments from Submitter:
From a sealed set.
|
Author: | 1977_mauro | Posted: | Oct 12, 2019 13:29 | Subject: | Re: Change gear 853651 to 853654 | Viewed: | 30 times | Topic: | Catalog | |
| Dzieki serdeczne
Thank you again!
In Catalog Requests, Hygrotus writes:
| In Catalog Requests, 1977_mauro writes:
and there it is
|
|
Author: | 1977_mauro | Posted: | Oct 12, 2019 13:06 | Subject: | Re: Change gear 853651 to 853654 | Viewed: | 30 times | Topic: | Catalog | |
| Thank you!
In Catalog Requests, Hygrotus writes:
| In Catalog Requests, Hygrotus writes:
| Number which you gave link to 853654 has diffrent torso and it is not in our
catalog
|
Added to the catalog
old one stays with it number without any change
|
|
Author: | 1977_mauro | Posted: | Jun 23, 2019 06:22 | Subject: | Inventory Change Request for Set 40335-1 | Viewed: | 24 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change {1 to 2} Part Trans-Red 4073 Plate, Round 1 x 1 Straight Side (Extra)
Comments from Submitter:
5 regular + 2 extra
(From a sealed set)
|
|
Author: | 1977_mauro | Posted: | Apr 14, 2019 12:57 | Subject: | Re: Inventory Change Request for Set 70620-1 | Viewed: | 14 times | Topic: | Inventories Requests | |
| Checked again, one additional missile there, 8 regular used for building.
In Inventories Requests, 1977_mauro writes:
| OK, I will recheck, if I have forgotten to add the missile somewhere in the set...
In Inventories Requests, SylvainLS writes:
| In Inventories Requests, 1977_mauro writes:
| Please make changes to the following inventory:
* Add 1 Part 61184 Light Bluish Gray Technic, Pin 1/2 with 2L Bar Extension (Flick Missile) (Extra)
Comments from Submitter:
I assume, someone has inventorized 4 x 87994 additional light bluish bars (1 to much by mistake) instead of adding one additional light bluish flick missile. Both are looking similar to each other.
(I think that the 4 bars should be reduced to 3 as well)
|
It’s not a mistake, I also got 9 (5+4) 87994 and 8 (8+0) 61184.
Extras are just that, extras, you are not assured to get them, and they can change
with production runs.
So, to be clear, your extra 61184 can be added but the 87994 you didn’t get should
stay.
|
|
|
|
Author: | 1977_mauro | Posted: | Apr 14, 2019 12:45 | Subject: | Re: Inventory Change Request for Set 70620-1 | Viewed: | 14 times | Topic: | Inventories Requests | |
| OK, I will recheck, if I have forgotten to add the missile somewhere in the set...
In Inventories Requests, SylvainLS writes:
| In Inventories Requests, 1977_mauro writes:
| Please make changes to the following inventory:
* Add 1 Part 61184 Light Bluish Gray Technic, Pin 1/2 with 2L Bar Extension (Flick Missile) (Extra)
Comments from Submitter:
I assume, someone has inventorized 4 x 87994 additional light bluish bars (1 to much by mistake) instead of adding one additional light bluish flick missile. Both are looking similar to each other.
(I think that the 4 bars should be reduced to 3 as well)
|
It’s not a mistake, I also got 9 (5+4) 87994 and 8 (8+0) 61184.
Extras are just that, extras, you are not assured to get them, and they can change
with production runs.
So, to be clear, your extra 61184 can be added but the 87994 you didn’t get should
stay.
|
|
|
Author: | 1977_mauro | Posted: | Apr 14, 2019 12:19 | Subject: | Inventory Change Request for Set 70620-1 | Viewed: | 40 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 61184 Light Bluish Gray Technic, Pin 1/2 with 2L Bar Extension (Flick Missile) (Extra)
Comments from Submitter:
I assume, someone has inventorized 4 x 87994 additional light bluish bars (1 to much by mistake) instead of adding one additional light bluish flick missile. Both are looking similar to each other.
(I think that the 4 bars should be reduced to 3 as well)
|
|
Author: | 1977_mauro | Posted: | Mar 23, 2019 01:06 | Subject: | Inventory Change Request for Set 70657-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 30153 Trans-Dark Pink Rock 1 x 1 Jewel 24 Facet (Extra)
Comments from Submitter:
Only this one was missing. The rest of the extra parts is perfectly inventorized...
|
|
Author: | 1977_mauro | Posted: | Feb 1, 2019 03:50 | Subject: | Re: Inventory Change Request for Set 6277-1 | Viewed: | 15 times | Topic: | Inventories Requests | |
| I can confirm that, the inventory is correct.
In Inventories Requests, samsam2 writes:
| I count 2 trans-yellow (and 2 solid yellow) in the large lantern. And 1 trans-yellow
on each small torch. Total of 4 Trans-yellow plate, round 1 x 1, so the existing
inventory is correct.
In Inventories Requests, wahiggin writes:
| Please make changes to the following inventory:
* Change {4 to 6} Part Trans-Yellow 4073 Plate, Round 1 x 1 Straight Side
Comments from Submitter:
48682 Part No: 4073 Trans-Yellow Plate, Round 1 x 1 Straight Side
Per instructions, there should be 6 of these instead of 4. 4 in the large lantern on the boat and 2 on each of the small torches.
|
|
|
|
Author: | 1977_mauro | Posted: | Jan 21, 2019 00:01 | Subject: | Inventory Change Request for Set 71040-1 | Viewed: | 34 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 30153 Trans-Dark Pink Rock 1 x 1 Jewel 24 Facet (Extra)
* Add 1 Part 30153 Trans-Purple Rock 1 x 1 Jewel 24 Facet (Extra)
* Change {1 to 2} Part Pearl Gold 33322 Minifigure, Crown Tiara, 5 Points, Rounded Ends (Extra)
* Change {1 to 2} Part Chrome Gold 11010 Minifigure, Utensil Ring 1 x 1 - Lord of the Rings (Extra)
Comments from Submitter:
Found in a sealed set - all other existing extra parts declarations are ok.
|
|
Author: | 1977_mauro | Posted: | Jan 6, 2019 00:58 | Subject: | Inventory Change Request for Set 21311-1 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change {1 to 2} Part Black 59895 Tire 14mm D. x 4mm Smooth Small Single with Number Molded on Side (Extra)
* Change {1 to 2} Part Red 3070b Tile 1 x 1 with Groove (3070) (Extra)
* Change {1 to 2} Part Black 2780 Technic, Pin with Friction Ridges Lengthwise WITH Center Slots (Extra)
* Change {1 to 2} Part Black 53585 Technic Ball Joint with Through Axle Hole (Extra)
* Change {1 to 3} Part Light Bluish Gray 54200 Slope 30 1 x 1 x 2/3 (Extra)
* Change {1 to 2} Part Light Bluish Gray 3024 Plate 1 x 1 (Extra)
Comments from Submitter:
From a sealed set.
|
|
Author: | 1977_mauro | Posted: | Dec 2, 2018 05:25 | Subject: | Inventory Change Request for Set 10263-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 3070b Red Tile 1 x 1 with Groove (Extra)
|
|
Author: | 1977_mauro | Posted: | Nov 24, 2018 06:24 | Subject: | Re: Inventory Change Request for Set 4002017-1 | Viewed: | 15 times | Topic: | Inventories Requests | |
| No problem - I will do that way in future.
Nie ma problemu, wezme to pod uwage na przyszlosc.
In Inventories Requests, Hygrotus writes:
| In Inventories Requests, 1977_mauro writes:
| My source is always the same - built a sealed sets by myself.
|
So please always write it
These change requests when approved will be preserved forever (they are not purged
now) so this will be usefull information for future why it was changed, added
etc.
|
|
Author: | 1977_mauro | Posted: | Nov 24, 2018 06:11 | Subject: | Re: Inventory Change Request for Set 4002017-1 | Viewed: | 29 times | Topic: | Inventories Requests | |
| My source is always the same - built a sealed sets by myself. |
|
Author: | 1977_mauro | Posted: | Nov 24, 2018 01:20 | Subject: | Inventory Change Request for Set 4002017-1 | Viewed: | 31 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 4032 White Plate, Round 2 x 2 with Axle Hole (Extra)
* Add 1 Part 57539 Flat Silver Hose, Flexible Ribbed with 8mm Ends, 19L (Extra)
* Add 2 Part 3673 Light Bluish Gray Technic, Pin without Friction Ridges Lengthwise (Extra)
* Add 2 Part 2780 Black Technic, Pin with Friction Ridges Lengthwise WITH Center Slots (Extra)
* Add 1 Part 3713 Red Technic Bush (Extra)
* Add 1 Part 3713 Light Bluish Gray Technic Bush (Extra)
* Add 1 Part 18654 Light Bluish Gray Technic, Pin Connector Round 1L (Extra)
* Add 2 Part 4274 Blue Technic, Pin 1/2 (Extra)
* Add 1 Part 18654 Black Technic, Pin Connector Round 1L (Extra)
* Add 1 Part 20482 Pearl Gold Tile, Round 1 x 1 with Bar and Pin Holder (Extra)
* Add 1 Part 24246 White Tile, Modified 1 x 1 Half Circle Extended (Stadium) with Groove (Extra)
* Add 1 Part 20482 Black Tile, Round 1 x 1 with Bar and Pin Holder (Extra)
* Add 1 Part 3070b Black Tile 1 x 1 with Groove (Extra)
* Add 1 Part 3070b Tan Tile 1 x 1 with Groove (Extra)
* Add 1 Part 54200 Black Slope 30 1 x 1 x 2/3 (Extra)
* Add 1 Part 54200 Red Slope 30 1 x 1 x 2/3 (Extra)
* Add 1 Part 4073 Pearl Gold Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 4073 Dark Bluish Gray Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 85861 Light Bluish Gray Plate, Round 1 x 1 with Open Stud (Extra)
* Add 1 Part 3024 Red Plate 1 x 1 (Extra)
* Add 1 Part 3024 Tan Plate 1 x 1 (Extra)
* Add 1 Part 3024 Green Plate 1 x 1 (Extra)
|
|
Author: | 1977_mauro | Posted: | Oct 9, 2018 00:27 | Subject: | Re: Inventory Change Request for Set 75144-1 | Viewed: | 18 times | Topic: | Inventories Requests | |
| Hmm, which source it could be...?
The UCS set itself in sealed condition.
My remarks mention only that I could have made a mistake during building.
In Inventories Requests, StormChaser writes:
| In Inventories Requests, 1977_mauro writes:
| Please check if 6 dark bluish slopes are really extra, it seems to be a little to much.
|
Please tell us what source you're using to request the addition of extra
parts for this set.
|
|
|
Author: | 1977_mauro | Posted: | Oct 8, 2018 12:33 | Subject: | Inventory Change Request for Set 75144-1 | Viewed: | 12 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 3070b Light Bluish Gray Tile 1 x 1 with Groove (Extra)
* Add 2 Part 3070b Orange Tile 1 x 1 with Groove (Extra)
* Add 2 Part 3070b White Tile 1 x 1 with Groove (Extra)
* Add 1 Part 98138 Dark Red Tile, Round 1 x 1 (Extra)
* Add 2 Part 98138 Reddish Brown Tile, Round 1 x 1 (Extra)
* Add 1 Part 98138 Trans-Clear Tile, Round 1 x 1 (Extra)
* Add 1 Part 85861 Black Plate, Round 1 x 1 with Open Stud (Extra)
* Add 4 Part 85861 Light Bluish Gray Plate, Round 1 x 1 with Open Stud (Extra)
* Add 8 Part 4073 Flat Silver Plate, Round 1 x 1 Straight Side (Extra)
Comments from Submitter:
Please check if 8 flat silver plates are really extra, it seems to be a little to much.
|
|
Author: | 1977_mauro | Posted: | Oct 8, 2018 12:28 | Subject: | Inventory Change Request for Set 75144-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 7 Part 2780 Black Technic, Pin with Friction Ridges Lengthwise WITH Center Slots (Extra)
* Add 4 Part 4265c Yellow Technic Bush 1/2 Smooth (Extra)
* Add 2 Part 4265c Light Bluish Gray Technic Bush 1/2 Smooth (Extra)
* Add 4 Part 4274 Light Bluish Gray Technic, Pin 1/2 (Extra)
* Add 2 Part 4599b Light Bluish Gray Tap 1 x 1 without Hole in Nozzle End (Extra)
* Add 4 Part 4274 Blue Technic, Pin 1/2 (Extra)
* Add 2 Part 60849 Black Minifig, Utensil Hose Nozzle Elaborate (Extra)
* Add 2 Part 3713 Red Technic Bush (Extra)
* Add 3 Part 93555 Flat Silver Minifig, Footgear Ice Skate (Extra)
* Add 1 Part 4697b Black Pneumatic T Piece New Style (T Bar) (Extra)
* Add 1 Part 87994 Black Bar 3L (Bar Arrow) (Extra)
* Add 1 Part 18654 Dark Bluish Gray Technic, Pin Connector Round 1L (Extra)
* Add 4 Part 54200 White Slope 30 1 x 1 x 2/3 (Extra)
* Add 6 Part 54200 Dark Bluish Gray Slope 30 1 x 1 x 2/3 (Extra)
* Add 2 Part 3024 Black Plate 1 x 1 (Extra)
* Add 1 Part 3024 Dark Bluish Gray Plate 1 x 1 (Extra)
* Add 2 Part 3024 Dark Tan Plate 1 x 1 (Extra)
* Add 1 Part 54200 Black Slope 30 1 x 1 x 2/3 (Extra)
* Add 1 Part 11253 Black Minifig, Footgear Roller Skate (Extra)
* Add 1 Part 3070b Trans-Orange Tile 1 x 1 with Groove (Extra)
Comments from Submitter:
Please check if 6 dark bluish slopes are really extra, it seems to be a little to much.
|
|
Author: | 1977_mauro | Posted: | Jul 29, 2018 11:57 | Subject: | Inventory Change Request for Set 40291-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change {1 to 2} Part Red 4073 Plate, Round 1 x 1 Straight Side (Extra)
Comments from Submitter:
2 red extra parts found, 4 used for building - as opposite no extra black round plate 1x1 available.
|
|
Author: | 1977_mauro | Posted: | Apr 13, 2018 12:52 | Subject: | Re: Inventory Change Request for Set 10246-1 | Viewed: | 34 times | Topic: | Inventories Requests | |
| Hi Marek,
I am not sure, if the third one was included in bag 1 or 2.
"Normaly Lego add one extra of part 4073 per bag (of course there are exeptions
like in some 2017 sets)"
-- No, see my approved change request for Ship in the bottle, there were
5 extra light blue round plates included into this set, but only 3 bags with
these
plates. Two bags had 2 plates extra in each bag - and this set came out 2018...
Mauro
In Inventories Requests, Hygrotus writes:
| In Inventories Requests, 1977_mauro writes:
| Please make changes to the following inventory:
* Change {2 to 3} Part Red 4073 Plate, Round 1 x 1 Straight Side (Extra)
Comments from Submitter:
3 are used in the building and 3 are extra parts.
|
One red 4073 is in one of bags numbered '1', two red 4073 are in one
of bags numbered '2'. Normaly Lego add one extra of part 4073 per bag
(of course there are exeptions like in some 2017 sets), so from this logic there
should be two extra only (part is in two bags). Here I also see only two extra
of this part https://www.eurobricks.com/forum/index.php?/forums/topic/103774-review-10246-detectives-office/
So you found in your set one more extra red 4073 is this correct? Just want to
be sure
Marek
|
|
|
Author: | 1977_mauro | Posted: | Apr 13, 2018 00:12 | Subject: | Inventory Change Request for Set 10246-1 | Viewed: | 40 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change {2 to 3} Part Red 4073 Plate, Round 1 x 1 Straight Side (Extra)
Comments from Submitter:
3 are used in the building and 3 are extra parts.
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|