Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | bje  | | Posted: | Jun 30, 2020 07:05 | | Subject: | Sets Members Want Project | | Viewed: | 132 times | | Topic: | Catalog | | Status: | Open | |
| From the to-do list:
https://www.bricklink.com/help.asp?helpID=2476
Add Sets Members Want - A project to discuss and possibly add pickable
models, in-store builds, and other similar sets to the catalog...
Project Review: This project traveled directly from under consideration to completed.
There were no existing guidelines discussing these kinds of sets, so no policy
changes were required. Instead, after administrative discussion, the majority
were in agreement to rescind the unwritten rule that prohibited addition of these
sets.
Date first added: December 6th, 2018
Date work began: June 13th, 2020
Goal for completion: July 1st, 2020
Date actually completed: June 17th, 2020
Suggested by: Many members
Maybe this is not so complete as catmins would like to believe it is as it appears
that none of those sets are in the catalogue at this time.
Also:
https://www.bricklink.com/message.asp?ID=1204676
seems to be voided now.
So perhaps this project should be set to under consideration again just so the
ball is not dropped and the technical issues, whatever those may be, can be addressed
before the goal date. I would dearly like to believe that BL will eventually
give members what they want.
|
 |
| Author: | BricksThatStick | | Posted: | Jun 30, 2020 04:46 | | Subject: | Inventory Change Request for Set 30452-1 | | Viewed: | 26 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 42445 Trans-Clear Bar 12L with 1 x 2 Plate End Solid Studs and 1 x 1 Round Plate End (Alternate) (match ID 1)
* Change 1 Part Trans-Clear 99784 Bar 12L with 1 x 2 Plate End Hollow Studs and 1 x 1 Round Plate End {match ID 0 to 1}
Comments from Submitter:
https://www.bricklink.com/message.asp?ID=1207215
|
|
| Author: | B3iR3 | | Posted: | Jun 29, 2020 17:14 | | Subject: | wanted list | | Viewed: | 74 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
| Hello
I would like the wanted list(s) to be automatically updated when i purchase certain
items that are on those list(s).
It would really save me a lot of time not having to figure out which items to
delete from the wanted list(s), and which ones to keep.
Kind regards
B3iR3
|
| Author: | MFelgate | | Posted: | Jun 29, 2020 14:29 | | Subject: | Inventory Change Request for Set 42080-1 | | Viewed: | 30 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 58176 Trans-Orange Bar with Light Cover (Bulb) / Bionicle Barraki Eye (Extra)
* Add 1 Part 43093 Blue Technic, Axle Pin with Friction Ridges Lengthwise (Extra)
|
| Author: | Sportsgurl | | Posted: | Jun 29, 2020 10:43 | | Subject: | can't find part 11113? | | Viewed: | 88 times | | Topic: | Catalog | | Status: | Open | |
| Hi, searching for part 11113 produces nothing but that seems to be the part number.
Does this need to be added to the catalog? Or am I missing something?
TIA
Joy
|
|
|
| Author: | Roxyncz | | Posted: | Jun 29, 2020 02:23 | | Subject: | Inventory Change Request for Set 60138-1 | | Viewed: | 23 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 92593pb037 White Plate, Modified 1 x 4 with 2 Studs without Groove with 'CS60138' License Plate Pattern (Sticker) - Set 60138 (Counterpart)
* Add 1 Part 87616pb012 Dark Bluish Gray Aircraft Fuselage Curved Aft Section 6 x 10 Bottom with Gray and White Lines and '60138' on Blue Background Pattern on Both Sides (Stickers) - Set 60138 (Counterpart)
* Add 2 Part 61678pb124 Dark Red Slope, Curved 4 x 1 with Silver Vents Pattern (Sticker) - Set 60138 (Counterpart)
* Add 1 Part 6636pb211 Blue Tile 1 x 6 with Blue 'POLICE' on White Background Pattern (Sticker) - Set 60138 (Counterpart)
* Add 1 Part 6079pb08 White Fence 1 x 8 x 2 2/3 with Black and Yellow Danger Stripes Pattern (Sticker) - Set 60138 (Counterpart)
* Add 1 Part 93589pb009 Dark Red Wedge 4 x 2 x 1 1/3 with 1 x 4 Base with Grille and Black Stripes Pattern (Sticker) - Set 60138 (Counterpart)
* Add 1 Part 45677pb122 White Wedge 4 x 4 x 2/3 Triple Curved with Blue Number 02 on White Background Pattern (Sticker) - Set 60138 (Counterpart)
|
|
| Author: | primadeluxe | | Posted: | Jun 29, 2020 02:07 | | Subject: | Inventory Change Request for Set 180-1 | | Viewed: | 32 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part BA198pb01L Black Stickered Assembly 8 x 1 x 2 with Red '180' with Oval Border on Black Background Pattern Model Left Side (Sticker) - Set 180 - 1 Brick 1 x 6, 1 Brick 1 x 8 (Counterpart)
* Add 1 Part BA198pb01R Black Stickered Assembly 8 x 1 x 2 with Red '180' with Oval Border on Black Background Pattern Model Right Side (Sticker) - Set 180 - 1 Brick 1 x 6, 1 Brick 1 x 8 (Counterpart)
* Add 1 Part BA197pb01 Black Stickered Assembly 4 x 4 x 2 with Red '180' with Oval Border on Black Background Pattern (Sticker) - Set 180 - 1 Brick 1 x 4, 2 Slopes 45 2 X 4 (Counterpart)
|
|
| Author: | Vosblokjes | | Posted: | Jun 29, 2020 01:44 | | Subject: | Inventory Change Request for Set 60071-1 | | Viewed: | 27 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 88930pb122 Dark Blue Slope, Curved 2 x 4 x 2/3 with Bottom Tubes with '06' and 'POLICE' Pattern (Sticker) - Set 60071 (Counterpart)
|
|
| Author: | SezaR | | Posted: | Jun 28, 2020 23:32 | | Subject: | Inventory Change Request for Set 8880-1 | | Viewed: | 68 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Delete 20 Part 6558 Black Technic, Pin 3L with Friction Ridges Lengthwise (Alternate) (match ID 6)
* Delete 2 Part 6558 Black Technic, Pin 3L with Friction Ridges Lengthwise (Extra)
* Change {18 to 20} Part Black 6558 Technic, Pin 3L with Friction Ridges Lengthwise {match ID 6 to 0}
* Change 4 Part White 6540a Technic, Steering Arm Large with Wheel Hub Holder - Pin Connection {match ID 1 to 99}
* Change 4 Part Light Gray 6540b Technic, Steering Arm Large with Wheel Hub Holder - Axle Connection (Alternate) {match ID 1 to 99}
* Change 4 Part Light Gray 6540a Technic, Steering Arm Large with Wheel Hub Holder - Pin Connection (Alternate) {match ID 1 to 99}
* Change 4 Part White 6540b Technic, Steering Arm Large with Wheel Hub Holder - Axle Connection (Alternate) {match ID 1 to 99}
* Change 4 Part Light Gray 2736 Technic, Axle Tow Ball (Alternate) {match ID 4 to 99}
* Change 4 Part Black 6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball {match ID 4 to 99}
* Change 4 Part Black 2736 Technic, Axle Tow Ball (Alternate) {match ID 4 to 99}
|
|
| Author: | spacecaptain | | Posted: | Jun 28, 2020 21:54 | | Subject: | sw0527a r2-d2 misprint? | | Viewed: | 113 times | | Topic: | Inventories | | Status: | Open | |
| has anyone seen this? the head is rotated 45 degrees. it came in 75257. i
can't find any pictures anywhere.
|
|
| Author: | AFOLliquidation | | Posted: | Jun 28, 2020 19:26 | | Subject: | Inventory Change Request for Set 6382-1 | | Viewed: | 27 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part BA196pb01 Red Stickered Assembly 12 x 6 x 2 1/3 with Fire Pattern (Sticker) - Set 6382 - 3 Brick 1 x 6, 1 Brick 1 x 4, 1 Plate 6 x 10 (Counterpart)
Comments from Submitter:
This item number is already in the system it just needs to be linked to set 6382
|
|
| Author: | Shintaku | | Posted: | Jun 28, 2020 13:46 | | Subject: | NPBs and NSSs proportional to feedback rating | | Viewed: | 103 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
| Hello,
I'm here since 10 years and I really find it wrong that a newcomer has 3
NPB as much as someone who is here since years.
I'll explain you why.
I really believe that a newcomer with 0 to 9 feedbacks shouldn't be allowed
to have more than 1 NPB chance. If you miss that, you're out.
As a seller, I have been targeted too much with newcomers that realize they don't
want to buy after the order was placed. This means my bricks are blocked for
7 to 21 days.
If I do cancel the order, the buyer can give me a negative, so I have to undergo
the NPB procedure in order to prevent the seller from giving nasty feedbacks.
My suggestion follows like this:
0-9 feedbacks rating : 1 NPB / NSS
10-99 2 NPB / NSS
100-999 3 NPB / NSS
1000-9999 4 NPB / NSS
10k+ 5 NPB / NSS
I believe that sellers may be targeted with NSS for facticious reasons, like
"1 piece wasn't in the package, I start a NSS" from a 0 fb rookie who still
doesn't know how BL works. Sometimes BL takes a lot of time to reply and
this lead in the past in the closing of many shops for a third NSS which wasn't
actually real. Giving a 4th or 5th NSS chance it's just a compensation for
possible "fake NSSs".
I'd personally prevent 0-9 feedback rating users from leaving negative feedbacks
too. But that's another story.
|
|
| Author: | Shintaku | | Posted: | Jun 28, 2020 04:42 | | Subject: | NPBs and NSSs proportional to feedback rating | | Viewed: | 129 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
| Hello,
I'm here since 10 years and I really find it wrong that a newcomer has 3
NPB as much as someone who is here since years.
I'll explain you why.
I really believe that a newcomer with 0 to 9 feedbacks shouldn't be allowed
to have more than 1 NPB chance. If you miss that, you're out.
As a seller, I have been targeted too much with newcomers that realize they don't
want to buy after the order was placed. This means my bricks are blocked for
7 to 21 days.
If I do cancel the order, the buyer can give me a negative, so I have to undergo
the NPB procedure in order to prevent the seller from giving nasty feedbacks.
My suggestion follows like this:
0-9 feedbacks rating : 1 NPB / NSS
10-99 2 NPB / NSS
100-999 3 NPB / NSS
1000-9999 4 NPB / NSS
10k+ 5 NPB / NSS
I believe that sellers may be targeted with NSS for facticious reasons, like
"1 piece wasn't in the package, I start a NSS" from a 0 fb rookie who still
doesn't know how BL works. Sometimes BL takes a lot of time to reply and
this lead in the past in the closing of many shops for a third NSS which wasn't
actually real. Giving a 4th or 5th NSS chance it's just a compensation for
possible "fake NSSs".
I'd personally prevent 0-9 feedback rating users from leaving negative feedbacks
too. But that's another story.
|
|
| Author: | Roxyncz | | Posted: | Jun 28, 2020 04:26 | | Subject: | Inventory Change Request for Set 60213-1 | | Viewed: | 18 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 28533c01pb01 Red Boat, Hull Unitary 16 x 8 Base with Dark Bluish Gray Top with '60213' and Fire Logo Badge Pattern on Both Sides (Stickers) - Set 60213 (Counterpart)
* Add 1 Part 892pb035 Light Bluish Gray Road Sign 2 x 2 Triangle with Clip with Car Falling into Water Pattern (Sticker) - Set 60213 (Counterpart)
|
|
| Author: | primadeluxe | | Posted: | Jun 28, 2020 04:25 | | Subject: | Number bricks: which is which | | Viewed: | 169 times | | Topic: | Catalog | | Status: | Open | |
| Can someone help me identify these number bricks, because in de catalog there
are three different entries, I have three different bricks, but they do not look
the same. And they have two different logo on the stud. See attached pictures.
Thanks!
|
|
| Author: | krazy_yvan | | Posted: | Jun 28, 2020 02:47 | | Subject: | Inventory Change Request for Set 75190-1 | | Viewed: | 22 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 6179pb178 Black Tile, Modified 4 x 4 with Studs on Edge with Red Angled Stripes Pattern (Sticker) - Set 75190 (Counterpart)
|
|
| Author: | krazy_yvan | | Posted: | Jun 28, 2020 02:46 | | Subject: | Inventory Change Request for Set 75212-1 | | Viewed: | 19 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 6 Part 2958pb080 Light Bluish Gray Technic, Disk 3 x 3 with SW Millennium Falcon Grille and White Outline Pattern (Sticker) - Set 75212 (Counterpart)
* Add 1 Part 3039pb134 Black Slope 45 2 x 2 with SW Millennium Falcon Control Panel, Yellow and White Buttons Pattern (Sticker) - Set 75212 (Counterpart)
* Add 2 Part 14769pb326 Light Bluish Gray Tile, Round 2 x 2 with Bottom Stud Holder with Dark Bluish Gray Fan on White Background Pattern (Sticker) - Set 75212 (Counterpart)
* Add 1 Part 3037pb058 Black Slope 45 2 x 4 with SW Millennium Falcon Control Panel, Bright Light Orange and Gray Buttons Pattern (Sticker) - Set 75212 (Counterpart)
* Add 1 Part 33909pb006 Yellow Tile, Modified 2 x 2 with Studs on Edge with SW Millennium Falcon Control Panel and Buttons Pattern (Sticker) - Set 75212 (Counterpart)
* Add 1 Part 14769pb327 Light Bluish Gray Tile, Round 2 x 2 with Bottom Stud Holder with SW Millennium Falcon Light Bluish Gray Pipes Pattern (Sticker) - Set 75212 (Counterpart)
* Add 1 Part 85984pb263 Black Slope 30 1 x 2 x 2/3 with SW Millennium Falcon Control Panel, White and Yellow Buttons and Speaker Pattern (Sticker) - Set 75212 (Counterpart)
* Add 1 Part 14769pb325 Light Bluish Gray Tile, Round 2 x 2 with Bottom Stud Holder with SW Millennium Falcon Dark Bluish Gray and White Circles Pattern (Sticker) - Set 75212 (Counterpart)
* Add 2 Part 3069bpb798 Light Bluish Gray Tile 1 x 2 with Groove with Bright Light Orange and White Danger Stripes and Aurebesh Characters 'CARGO' Pattern (Sticker) - Set 75212 (Counterpart)
* Add 1 Part 14769pb324 Light Bluish Gray Tile, Round 2 x 2 with Bottom Stud Holder with SW Millennium Falcon Dark Bluish Gray and White Circles and Cross Pattern (Sticker) - Set 75212 (Counterpart)
* Add 1 Part 6179pb179 Black Tile, Modified 4 x 4 with Studs on Edge with SW Millennium Falcon Control Panel, Bright Light Orange and White Buttons Pattern (Sticker) - Set 75212 (Counterpart)
|
|
| Author: | krazy_yvan | | Posted: | Jun 28, 2020 02:39 | | Subject: | Inventory Change Request for Set 75155-1 | | Viewed: | 14 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 13252pb02 Trans-Clear Windscreen 12 x 6 x 2 with Locking Dual 2 Fingers Hinge with SW Dark Bluish Gray, Dark Blue and White Stripes Pattern (Stickers) - Set 75155 (Counterpart)
|
|
| Author: | Brixalotl | | Posted: | Jun 27, 2020 20:55 | | Subject: | Inventory Change Request for Set 75215-1 | | Viewed: | 21 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 6 Part 44302b Dark Bluish Gray Hinge Plate 1 x 2 Locking with 2 Fingers on End and 9 Teeth without Bottom Groove (Alternate) (match ID 1)
* Change 6 Part Dark Bluish Gray 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End and 9 Teeth with Bottom Groove {match ID 0 to 1}
Comments from Submitter:
found both versions during part out, thanks
|
|
| Author: | SezaR | | Posted: | Jun 27, 2020 16:50 | | Subject: | Inventory Change Request for Set 7727-1 | | Viewed: | 23 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Delete 16 Part 3048 Black Slope 45 2 x 1 Triple (Undetermined Underside Type)
* Add 16 Part 3048a Black Slope 45 2 x 1 Triple without Inside Bar or Bottom Stud Holder
Comments from Submitter:
I have multiple copies of this set. One of my copies is in mint condition with new sticker sheet. Looks like it was built only once.
All my copies come with 3048a.
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
)
)
)
)
