Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | L.tide | Posted: | Dec 16, 2018 10:16 | Subject: | Inventory Change Request for Set 31080-1 | Viewed: | 12 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 48729b Black Bar 1L with Clip Mechanical Claw, Cut Edges and Hole on Side (Extra)
* Add 1 Part 53451 Black Barb / Claw / Horn - Small (Extra)
* Add 1 Part 20482 Black Tile, Round 1 x 1 with Bar and Pin Holder (Extra)
* Add 1 Part 4073 Green Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 4073 Light Bluish Gray Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 90540 Pearl Gold Minifigure, Utensil Ski Pole 3L with Handle, Stop Ring and Side Stops (Extra)
* Add 1 Part 4073 Red Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 87994 Reddish Brown Bar 3L (Bar Arrow) (Extra)
* Add 1 Part 4073 Reddish Brown Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 4073 Trans-Light Blue Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 4073 Trans-Yellow Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 4073 Trans-Orange Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 46304 White Minifigure, Visor Snow Goggles (Extra)
* Add 1 Part 4073 White Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 3024 White Plate 1 x 1 (Extra)
* Add 1 Part 54200 White Slope 30 1 x 1 x 2/3 (Extra)
* Add 1 Part 98138pb007 White Tile, Round 1 x 1 with Black Eye with Pupil Pattern (Extra)
Comments from Submitter:
sealed set
|
|
Author: | SezaR | Posted: | Dec 16, 2018 10:02 | Subject: | Inventory Change Request for Set 6986-1 | Viewed: | 15 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 4 Part 3641 Black Tire 15mm D. x 6mm Offset Tread Small
* Delete 4 Part 4624 White Wheel 8mm D. x 6mm
* Change 4 Part White 4624c02 Wheel 8mm D. x 6mm with Black Tire 15mm D. x 6mm Offset Tread Small (4624 / 3641) {Counterpart to Regular}
|
|
Author: | axaday | Posted: | Dec 15, 2018 19:44 | Subject: | Inventory Change Request for Set 10159-2 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 14 Part 3139 Black Tire 14mm D. x 4mm Smooth Small Single
* Delete 12 Part 3641 Black Tire 15mm D. x 6mm Offset Tread Small
* Delete 14 Part 4624 Light Bluish Gray Wheel 8mm D. x 6mm
* Delete 12 Part 4624 White Wheel 8mm D. x 6mm
* Change 14 Part Light Bluish Gray 4624c01 Wheel 8mm D. x 6mm with Black Tire 14mm D. x 4mm Smooth Small Single (4624 / 3139) {Counterpart to Regular}
* Change 12 Part White 4624c02 Wheel 8mm D. x 6mm with Black Tire 15mm D. x 6mm Offset Tread Small (4624 / 3641) {Counterpart to Regular}
Comments from Submitter:
2 Sealed Sets. Pics Following
|
|
Author: | axaday | Posted: | Dec 15, 2018 18:19 | Subject: | Inventory Change Request for Set 10159-2 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 5 Part Reddish Brown {2536 Plant, Tree Palm Trunk - (MARKED FOR DELETION - Undetermined Connector Version) to 2536d Plant, Tree Palm Trunk - Short Connector, Axle Hole with 2 Inside Prongs}
* Change 4 Part White {2453 Brick 1 x 1 x 5 - Undetermined Stud Type to 2453a Brick 1 x 1 x 5 - Blocked Open Stud or Hollow Stud}
Comments from Submitter:
Opened 2 sealed sets. Pics below
|
|
|
Author: | silverstar2244 | Posted: | Dec 15, 2018 17:59 | Subject: | Inventory Change Request for Set 7704-1 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 41749 Black Wedge 8 x 3 x 2 Open Right (Counterpart)
* Add 2 Part 41750 Black Wedge 8 x 3 x 2 Open Left (Counterpart)
Comments from Submitter:
Requesting the addition of the 2 pieces above with the stickers 7 and 8 on them respectively, under "Sticker Over Assembly".
The 2 pieces are connected into a large wedge and the sticker each placed over the seam.
Can provide images if needed.
|
|
Author: | L.tide | Posted: | Dec 15, 2018 17:00 | Subject: | Inventory Change Request for Set 31075-1 | Viewed: | 13 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 4073 Black Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 2780 Black Technic, Pin with Friction Ridges Lengthwise WITH Center Slots (Extra)
* Add 1 Part 3024 Blue Plate 1 x 1 (Extra)
* Add 1 Part 54200 Dark Bluish Gray Slope 30 1 x 1 x 2/3 (Extra)
* Add 1 Part 4073 Flat Silver Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 48729b Light Bluish Gray Bar 1L with Clip Mechanical Claw, Cut Edges and Hole on Side (Extra)
* Add 1 Part 4073 Lime Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 54200 Medium Dark Flesh Slope 30 1 x 1 x 2/3 (Extra)
* Add 1 Part 4073 Red Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 33183 Reddish Brown Carrot Top / Twig (Extra)
* Add 1 Part 98138 Trans-Clear Tile, Round 1 x 1 (Extra)
* Add 1 Part 3024 White Plate 1 x 1 (Extra)
Comments from Submitter:
sealed set
|
|
Author: | bricktopiausa | Posted: | Dec 15, 2018 15:57 | Subject: | Inventory Change Request for Set 75902-1 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 43710 Lime Wedge 4 x 2 Triple Left (Counterpart)
* Add 1 Part 43711 Lime Wedge 4 x 2 Triple Right (Counterpart)
Comments from Submitter:
This set has 4 wedges
(2) Left
(2) Rights
all 4 receive stickers. Current inventory shows only 2 of them getting stickers. There are Rights and lefts of 2 sticker types.
|
|
Author: | L.tide | Posted: | Dec 15, 2018 13:53 | Subject: | Inventory Change Request for Set 30542-1 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 54200 Black Slope 30 1 x 1 x 2/3 (Extra)
* Add 1 Part 2780 Black Technic, Pin with Friction Ridges Lengthwise WITH Center Slots (Extra)
* Add 1 Part 4274 Light Bluish Gray Technic, Pin 1/2 (Extra)
* Add 1 Part 4073 Red Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 3024 Tan Plate 1 x 1 (Extra)
* Add 1 Part 54200 Tan Slope 30 1 x 1 x 2/3 (Extra)
* Add 1 Part 98138pb007 White Tile, Round 1 x 1 with Black Eye with Pupil Pattern (Extra)
Comments from Submitter:
sealed set
|
|
Author: | Stuart9 | Posted: | Dec 15, 2018 11:42 | Subject: | Slight variation on book cover to catalogue | Viewed: | 52 times | Topic: | Catalog | Status: | Open | |
| Appears to be the approved version, it's missing the bottom print, but has
the registered mark and the 6+.
|
|
Author: | runner.caller | Posted: | Dec 15, 2018 11:35 | Subject: | Extra Sticker set in Indoraptor Rampage | Viewed: | 51 times | Topic: | Inventories | Status: | Open | |
| I got 2 sticker sets (75930stk01) in set 75930-1.
Anyone else experience this?
|
Author: | Erik17 | Posted: | Dec 15, 2018 04:17 | Subject: | unknown stones | Viewed: | 124 times | Topic: | Catalog | Status: | Open | |
| Hello dear community
Can anyone help me identify these stones?
Many Thanks
Erik
|
|
Author: | legnasloot | Posted: | Dec 15, 2018 00:10 | Subject: | Swirled modern part | Viewed: | 85 times | Topic: | Colors | Status: | Open | |
| Found this in a goodwill lot. Thought it was pencil marks at first. Pretty cool!
#54097 (can't remember how to imbed parts)
|
|
|
|
Author: | fab_track | Posted: | Dec 14, 2018 18:13 | Subject: | Inventory Change Request for Set 40108-1 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part White {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 15573 Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)}
|
|
Author: | SezaR | Posted: | Dec 14, 2018 16:25 | Subject: | Inventory Change Request for Set 6381-1 | Viewed: | 24 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 4 Part 4073 Black Plate, Round 1 x 1 Straight Side
* Delete 2 Part 4073 Trans-Green Plate, Round 1 x 1 Straight Side
* Delete 2 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side
* Add 2 Part 4073c01 Black Plate, Round 1 x 1, 2 on Sprue
* Add 1 Part 4073c01 Trans-Red Plate, Round 1 x 1, 2 on Sprue
* Add 1 Part 4073c01 Trans-Green Plate, Round 1 x 1, 2 on Sprue
Comments from Submitter:
Photos will be sent to admin.
|
|
Author: | SezaR | Posted: | Dec 14, 2018 16:13 | Subject: | Inventory Change Request for Set 7735-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 3002 Yellow Brick 2 x 3
* Add 1 Part 4073c01 Trans-Clear Plate, Round 1 x 1, 2 on Sprue (Extra)
* Change 1 Part Yellow 3002old Brick 2 x 3 without Cross Supports {match ID 0 to 6}
Comments from Submitter:
Source: MISB copy
Photos will be added soon.
|
Author: | mjwest83 | Posted: | Dec 14, 2018 10:47 | Subject: | Inventory Change Request for Set 4841-1 | Viewed: | 28 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 4 Part 51011u Black Tire 17.5mm D. x 6mm with Shallow Staggered Treads - (MARKED FOR DELETION - Undetermined Version)
* Add 4 Part 42611 Black Tire 17.5mm D. x 6mm with Shallow Staggered Treads
|
Author: | randyf | Posted: | Dec 14, 2018 04:03 | Subject: | Inventory Change Request for Set 6054-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change {2 to 1} Part Yellow {4073 Plate, Round 1 x 1 Straight Side to 4073c01 Plate, Round 1 x 1, 2 on Sprue}
Comments from Submitter:
Images to follow.
|
|
Author: | normann1974 | Posted: | Dec 13, 2018 18:02 | Subject: | Inventory Change Request for Set 9390-1 | Viewed: | 24 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 4 Part 92402 Black Tire 30.4 x 14 Offset Tread - Band Around Center of Tread (Alternate) (match ID 1)
* Add 4 Part 55982c05 Light Bluish Gray Wheel 18mm D. x 14mm with Axle Hole, Fake Bolts and Shallow Spokes with Black Tire 30.4 x 14 Offset Tread Band Around Center of Tread (55982 / 92402) (Counterpart)
* Change 4 Part Black 30391 Tire 30.4 x 14 Offset Tread {match ID 0 to 1}
Comments from Submitter:
Source: I found these tires on a set that I bought used, but I found an unboxing on Brickshelf that show them as well:
http://www.brickshelf.com/cgi-bin/gallery.cgi?i=5344419
|
|
Author: | normann1974 | Posted: | Dec 13, 2018 17:40 | Subject: | Inventory Change Request for Set 8259-1 | Viewed: | 20 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 4865b Yellow Panel 1 x 2 x 1 with Rounded Corners (Alternate) (match ID 1)
* Change 1 Part Yellow 4865 Panel 1 x 2 x 1 {match ID 0 to 1}
Comments from Submitter:
Source: MISB-based set that has never mixed with other bricks. All other counts (incl. extras) confirmed.
|
|
Author: | normann1974 | Posted: | Dec 13, 2018 16:42 | Subject: | Inventory Change Request for Set 8272-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 4274 Light Bluish Gray Technic, Pin 1/2 (Extra)
* Add 1 Part 78c02 Flat Silver Hose, Ribbed 7mm D. 2L (Extra)
* Change {2 to 1} Part Light Bluish Gray 4274 Technic, Pin 1/2
Comments from Submitter:
Source: MISB-based set that was never mixed with other bricks. According to instructions (book 1), there is only 1 part 4274 in set this (so the other one is therefore extra). My set had an extra hose. BTW - 4 pieces are not used for the main build: 1x57520, 1x57518, 1x3647, 1x4716.
|
|
Author: | StormChaser | Posted: | Dec 13, 2018 15:35 | Subject: | Inventory Change Request for Set 6280-1 | Viewed: | 12 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Gear p96pirate (Not Applicable) Pirates Poster 1996 (4.103.789/4.103.790-EU)
Comments from Submitter:
Per additional note for poster.
|
Author: | StormChaser | Posted: | Dec 13, 2018 15:32 | Subject: | Inventory Change Request for Set 7075-1 | Viewed: | 12 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Gear 4244911 (Not Applicable) Pirates Captain Redbeard Poster (Double-Sided)
Comments from Submitter:
Additional note says that poster came in this set.
|
Author: | StormChaser | Posted: | Dec 13, 2018 15:28 | Subject: | Inventory Change Request for Set 7074-1 | Viewed: | 12 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Gear 4244910 (Not Applicable) Pirates Captain Kragg Poster
Comments from Submitter:
Freestyle posters are included in set inventories, so I see no reason why this poster should not also be included in the inventory of the set in which it came.
|
Author: | TakeAbricK | Posted: | Dec 13, 2018 13:19 | Subject: | Inventory Change Request for Set 801-2 | Viewed: | 11 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 12 Part 3003old Blue Brick 2 x 2 without Inside Supports (Alternate) (match ID 2)
* Change 12 Part Blue 3003 Brick 2 x 2 {match ID 0 to 2}
Comments from Submitter:
Source: Sealed Set Contents
3001
3002old
3003old
Diana
|
Author: | mjwest83 | Posted: | Dec 13, 2018 13:18 | Subject: | Inventory Change Request for Set 71043-1 | Viewed: | 16 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part spa0029 (Not Applicable) Mini Hungarian Horntail - Set 71043 (Counterpart)
* Add 1 Part spa0030 (Not Applicable) Mini Hagrid's Hut - Set 71043 (Counterpart)
* Add 1 Part spa0031 (Not Applicable) Mini Whomping Willow - Set 71043 (Counterpart)
|
|
Author: | FreeStorm | Posted: | Dec 13, 2018 13:02 | Subject: | Inventory Change Request for Set 5198-1 | Viewed: | 15 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 4 Part 4073 Trans-Clear Plate, Round 1 x 1 Straight Side
* Add 2 Part 4073c01 Trans-Clear Plate, Round 1 x 1, 2 on Sprue
* Delete 4 Part 4073 Trans-Green Plate, Round 1 x 1 Straight Side
* Add 2 Part 4073c01 Trans-Green Plate, Round 1 x 1, 2 on Sprue
* Delete 4 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side
* Add 2 Part 4073c01 Trans-Red Plate, Round 1 x 1, 2 on Sprue
* Delete 4 Part 4073 Trans-Yellow Plate, Round 1 x 1 Straight Side
* Add 2 Part 4073c01 Trans-Yellow Plate, Round 1 x 1, 2 on Sprue
Comments from Submitter:
Source:
https://www.toysperiod.com/img/cache/cd/800x600/d4e4o5g414m4r5g5m444a4f446o2o4c4z5o4p59406u203446323y3y2r2x2y2u2b4w2t294v2t2t2n2b4p4o5l2a4u264x3x254p2.jpg
|
|
Author: | mjwest83 | Posted: | Dec 13, 2018 13:00 | Subject: | Inventory Change Request for Set 75953-1 | Viewed: | 12 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part spa0027 (Not Applicable) Ford Anglia - Set 75953 (Counterpart)
* Add 1 Part spa0028 (Not Applicable) Whomping Willow - Set 75953 (Counterpart)
|
Author: | mjwest83 | Posted: | Dec 13, 2018 12:59 | Subject: | Inventory Change Request for Set 4841-1 | Viewed: | 13 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part spa0026 (Not Applicable) Ford Anglia - Set 4841 (Counterpart)
|
Author: | mjwest83 | Posted: | Dec 13, 2018 12:58 | Subject: | Inventory Change Request for Set 75954-1 | Viewed: | 9 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part basilisk02 (Not Applicable) Basilisk - Set 75954 (Counterpart)
* Add 1 Part fawkes01 (Not Applicable) Fawkes - Set 75954 (Counterpart)
|
Author: | normann1974 | Posted: | Dec 13, 2018 12:41 | Subject: | Inventory Change Request for Set 8283-1 | Viewed: | 27 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change {25 to 23} Part Light Bluish Gray 4265c Technic Bush 1/2 Smooth
Comments from Submitter:
There are only 23 of this part (and two extra) in this set (confirmed in my MISB-based set that was never mixed with other bricks). Please see count in instructions (image will follow).
|
|
Author: | TakeAbricK | Posted: | Dec 13, 2018 11:58 | Subject: | Inventory Change Request for Set 805-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 12 Part 3003old Light Gray Brick 2 x 2 without Inside Supports (Alternate) (match ID 2)
* Change 12 Part Light Gray 3003 Brick 2 x 2 {match ID 0 to 2}
Comments from Submitter:
Source: Sealed Set Contents
3001
3002old
3003old
Diana
|
|
Author: | Hygrotus | Posted: | Dec 13, 2018 11:03 | Subject: | Inventory Change Request for Minifig sw534 | Viewed: | 32 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory: [M=sw534]
* Change 1 Part Red {553pb016 Brick, Round 2 x 2 Dome Top with Silver Pattern (R4-P17 / Astromech Droid)) to 553pb034 Brick, Round 2 x 2 Dome Top with Silver Band around Dome, Lime Dot Pattern (Astromech Droid)}
Comments from Submitter:
This droid has unique dome printig, new entry was crated for it.
https://www.bricklink.com/message.asp?ID=1119518
|
|
Author: | HallBricks | Posted: | Dec 13, 2018 10:55 | Subject: | Have more customers leave feedback | Viewed: | 137 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
| I would like to see more customers leave feedback after receiving their orders.
It should probably not be mandatory to write something, positive or negative
should be enough and the option to write a message if one wants to.
Feedback really helps the seller, and is a nice gesture after an enjoyable transaction.
|
Author: | rapar | Posted: | Dec 13, 2018 04:21 | Subject: | Please approve LEGO Movie 2 30620 Polybag | Viewed: | 249 times | Topic: | Catalog | Status: | Open | |
| Hello,
Can you please approve The Lego Movie 2: 30620 Star-Stuck Emmet Polybag? I have
some in my hands. This polybag can already be purchased in Poland.
If you need more information please let me know.
Thank you!
|
|
Author: | axaday | Posted: | Dec 12, 2018 21:34 | Subject: | Inventory Change Request for Set 8225-1 | Viewed: | 11 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part 2715 Black Technic, Figure Accessory Helmet
* Delete 1 Part 2716 Trans-Clear Technic, Figure Accessory Helmet Visor
* Change 1 Minifig {tech012 Technic Figure Black Legs, Light Gray Top with 2 Brown Belts, Black Arms to tech030 Technic Figure Black Legs, Light Gray Top with 2 Brown Belts, Black Arms, Black Helmet}
Comments from Submitter:
https://www.youtube.com/watch?v=pa2dkkFfo0s
|
|
Author: | axaday | Posted: | Dec 12, 2018 21:32 | Subject: | Inventory Change Request for Set 8244-1 | Viewed: | 13 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part 2715 Black Technic, Figure Accessory Helmet
* Delete 1 Part 2716 Trans-Clear Technic, Figure Accessory Helmet Visor
* Change 1 Minifig {tech012 Technic Figure Black Legs, Light Gray Top with 2 Brown Belts, Black Arms to tech030 Technic Figure Black Legs, Light Gray Top with 2 Brown Belts, Black Arms, Black Helmet}
Comments from Submitter:
http://lego.brickinstructions.com/lego_instructions/set/8244/Transformer_Set I don't actually see a page where they say to get him out and put him together. He's just pictured in the driver's seat with his helmet on.
|
|
Author: | axaday | Posted: | Dec 12, 2018 21:27 | Subject: | Inventory Change Request for Set 8714-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part 2715 Black Technic, Figure Accessory Helmet
* Delete 1 Part 2716 Trans-Clear Technic, Figure Accessory Helmet Visor
* Change 1 Minifig {tech012 Technic Figure Black Legs, Light Gray Top with 2 Brown Belts, Black Arms to tech030 Technic Figure Black Legs, Light Gray Top with 2 Brown Belts, Black Arms, Black Helmet}
|
|
Author: | axaday | Posted: | Dec 12, 2018 21:23 | Subject: | Inventory Change Request for Set 8229-1 | Viewed: | 12 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part 2715 Black Technic, Figure Accessory Helmet
* Delete 1 Part 2716 Trans-Clear Technic, Figure Accessory Helmet Visor
* Change 1 Minifig {tech012 Technic Figure Black Legs, Light Gray Top with 2 Brown Belts, Black Arms to tech030 Technic Figure Black Legs, Light Gray Top with 2 Brown Belts, Black Arms, Black Helmet}
|
|
Author: | Brixalotl | Posted: | Dec 12, 2018 20:36 | Subject: | Inventory Change Request for Set 76021-1 | Viewed: | 20 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 2 Part 44302 Light Bluish Gray Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type)
* Add 2 Part 44302a Light Bluish Gray Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove (match ID 1)
* Add 2 Part 44302b Light Bluish Gray Hinge Plate 1 x 2 Locking with 2 Fingers on End without Bottom Groove (Alternate) (match ID 1)
* Add 2 Part 21459 Flat Silver Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Capped Pommel and Holes in Crossguard and Blade (Alternate) (match ID 2)
* Add 1 Part 14769 Lime Tile, Round 2 x 2 with Bottom Stud Holder (Alternate) (match ID 3)
* Change 2 Part Flat Silver 30173b Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Uncapped Pommel and Hole in Hilt {match ID 0 to 2}
* Change 1 Part Lime 4150 Tile, Round 2 x 2 {match ID 0 to 3}
Comments from Submitter:
confirmed during part-out, thanks
|
|
Author: | normann1974 | Posted: | Dec 12, 2018 18:32 | Subject: | Inventory Change Request for Set 8272-1 | Viewed: | 24 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 78c07 Red Hose, Ribbed 7mm D. 7L (Counterpart)
* Change 2 Part Dark Bluish Gray {2739 Technic, Link 1 x 6 - (MARKED FOR DELETION - Undetermined Inner Ring Ends Version) to 2739b Technic, Link 1 x 6 with Stoppers}
Comments from Submitter:
Source: MISB-based set that was never mixed with other bricks. My set has link with stoppers. I'm also adding two counterparts, because the instructions instructs the user to cut the hose in two halves (page 63). I'm not sure if this is the correct way to do it on BrickLink, but any used set would most likely never include a 14L hose, but two 7L hoses. As previously discussed for another set, it's my belief that the 2L hoses are PLG, not flat silver. They seem to have the same color as the bionicle teeth which are PLG in this set. But a change of this is likely to be rejected, I'll not do it here but only leave my thoughts on it.
|
|
Author: | Flyingmic | Posted: | Dec 12, 2018 18:12 | Subject: | Inventory Change Request for Set 8641-1 | Viewed: | 17 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 6091 Orange Brick, Modified 1 x 2 x 1 1/3 with Curved Top (Counterpart)
Comments from Submitter:
The second sticker with the number 2 as seen on the sticker sheet goes on one of the orange parts (nr. 6091) in the set.
|
Author: | SezaR | Posted: | Dec 12, 2018 16:41 | Subject: | Inventory Change Request for Set 6622-1 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part 4073 Trans-Yellow Plate, Round 1 x 1 Straight Side
* Add 1 Part 4073c01 Trans-Yellow Plate, Round 1 x 1, 2 on Sprue
Comments from Submitter:
MISB from personal collection. Photos will be added soon.
|
Author: | samsam2 | Posted: | Dec 12, 2018 16:41 | Subject: | Same Microfigure Ramses and Orient Bazaar | Viewed: | 54 times | Topic: | Catalog | Status: | Open | |
| These two microfigures look very similar,
it took me forever to see the difference, one with belt and one without belt.
Does it make sense to mention belt/no belt in their names?
|
|
Author: | Teutsch | Posted: | Dec 12, 2018 16:27 | Subject: | Inventory Change Request for Set 10194-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 44375b Black Dish 6 x 6 Inverted (Radar) - Solid Studs (match ID 2)
Comments from Submitter:
I built my Emerald Night a month ago, MISB Set which I bought myself from Lego-Online-Store several years ago in Germany. The Set contains definately another version - my black dish has not any hollow studs, it has solid studs, so there is an alternate version of this set! If needed, I can send pictures of the LOT, Train itself, seals on packaging to locate the lego-factory my set got produced.
|
|
Author: | FreeStorm | Posted: | Dec 12, 2018 13:14 | Subject: | Inventory Change Request for Set 5042-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 4 Part 4073 Trans-Clear Plate, Round 1 x 1 Straight Side
* Add 2 Part 4073c01 Trans-Clear Plate, Round 1 x 1, 2 on Sprue
* Delete 4 Part 4073 Trans-Green Plate, Round 1 x 1 Straight Side
* Add 2 Part 4073c01 Trans-Green Plate, Round 1 x 1, 2 on Sprue
* Delete 4 Part 4073 Trans-Neon Green Plate, Round 1 x 1 Straight Side
* Add 2 Part 4073c01 Trans-Neon Green Plate, Round 1 x 1, 2 on Sprue
* Delete 4 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side
* Add 2 Part 4073c01 Trans-Red Plate, Round 1 x 1, 2 on Sprue
* Delete 4 Part 4073 Trans-Yellow Plate, Round 1 x 1 Straight Side
* Add 2 Part 4073c01 Trans-Yellow Plate, Round 1 x 1, 2 on Sprue
Comments from Submitter:
Source:
https://www.bricklink.com/SL/5042-1.jpg?0
http://www.brickshelf.com/gallery/Rober-to/ServicePack/5042.jpg
|
|
Author: | brickphils | Posted: | Dec 12, 2018 09:03 | Subject: | Stickered Parts separate category | Viewed: | 82 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
| Hi,
Pls create separate category for stickered parts so that we dont have to go through
them when we are browsing items only with decorated/printed ones.
Thanks.
|
Author: | Roloff | Posted: | Dec 12, 2018 07:26 | Subject: | Inventory Change Request for Set 2000409-2 | Viewed: | 25 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 3010 Dark Pink Brick 1 x 4
Comments from Submitter:
Newer sets have these bricks added in the inventory
|
Author: | bricksofsweden | Posted: | Dec 12, 2018 05:58 | Subject: | Coupons improvement | Viewed: | 136 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
| Hi,
Not sure if this has been brought up in earlier suggestions but I am giving it
a go anyway.
I would like to see the possibility of creating a coupon which is valid for all
buyers. Right now this is only limited to a certain username.
Kind Regards,
Simon
|
Author: | Cmplopes | Posted: | Dec 12, 2018 04:12 | Subject: | Inventory Change Request for Set 995-1 | Viewed: | 26 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 3066px10 Trans-Clear Brick 1 x 4 without Bottom Tubes with White LEGO Logo on Red Pattern (Alternate) (match ID 313441 )
Comments from Submitter:
You can find sets with this alternate piece
|
Author: | ANFRICKE20 | Posted: | Dec 12, 2018 00:07 | Subject: | Space helmetsSpace 2nd post | Viewed: | 94 times | Topic: | Catalog | Status: | Open | |
| Thanks for everyone for looking and responding.i took a picture of the helmets
that only have one dimple. I have 30 of them all blue with the dimple on the
right side. They are not teeth marks. These helmets all are in great shape some
most never been on a minifig.
My question is how would I put it in my store on bricklink. Thanks adam
|
|
|
Author: | Hygrotus | Posted: | Dec 11, 2018 15:50 | Subject: | Inventory Change Request for Set 8678-1 | Viewed: | 24 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 30350c White Tile, Modified 2 x 3 with 2 Clips (thick U clips) (Alternate) (match ID 1)
* Change 2 Part White {30350 Tile, Modified 2 x 3 with 2 Clips - (MARKED FOR DELETION - Undetermined Clip Type Version) to 30350a Tile, Modified 2 x 3 with 2 Clips (angled clips)} {match ID 0 to 1}
* Change 2 Part White {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove}
Comments from Submitter:
Additional informations to follow.
|
|
Author: | normann1974 | Posted: | Dec 11, 2018 14:57 | Subject: | Inventory Change Request for Set 8067-1 | Viewed: | 30 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part x77ac100 Black String, Cord Thin 100cm (Alternate) (match ID 1)
* Change 1 Part Black x77ac50 String, Cord Thin 50cm {match ID 0 to 1}
Comments from Submitter:
Source: MISB-based set that were never mixed with other bricks. My set's string is 1 meter long.
|
Author: | mjwest83 | Posted: | Dec 11, 2018 12:51 | Subject: | Inventory Change Request for Set 30448-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part spa0025 (Not Applicable) Venom Symbiote - Set 30448 (Counterpart)
|
Author: | mjwest83 | Posted: | Dec 11, 2018 12:50 | Subject: | Inventory Change Request for Set 31048-1 | Viewed: | 11 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part moose01 (Not Applicable) Moose - Set 31048 (Counterpart)
|
Author: | mjwest83 | Posted: | Dec 11, 2018 12:49 | Subject: | Inventory Change Request for Set 31051-1 | Viewed: | 14 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part whale01 (Not Applicable) Killer Whale - Set 31051 (Counterpart)
|
Author: | mjwest83 | Posted: | Dec 11, 2018 12:48 | Subject: | Inventory Change Request for Set 31052-1 | Viewed: | 17 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part bear01 (Not Applicable) Bear - Set 31052 (Counterpart)
|
|
Author: | mjwest83 | Posted: | Dec 11, 2018 12:22 | Subject: | Inventory Change Request for Set 76099-1 | Viewed: | 14 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 11477pb062 Light Bluish Gray Slope, Curved 2 x 1 No Studs with 5 Dark Bluish Gray Rectangles Pattern (Sticker) - Set 76099 (Counterpart)
* Add 1 Part 11477pb063L Light Bluish Gray Slope, Curved 2 x 1 No Studs with Dark Bluish Gray Eye Cover and Metallic Gold Decorative Pattern Model Left Side (Sticker) - Set 76099 (Counterpart)
* Add 1 Part 11477pb063R Light Bluish Gray Slope, Curved 2 x 1 No Studs with Dark Bluish Gray Eye Cover and Metallic Gold Decorative Pattern Model Right Side (Sticker) - Set 76099 (Counterpart)
* Add 2 Part 15068pb155 Light Bluish Gray Slope, Curved 2 x 2 No Studs with Gold and Light Bluish Gray Panel Pattern (Sticker) - Set 76099 (Counterpart)
* Add 1 Part 24309pb010 Light Bluish Gray Slope, Curved 3 x 2 No Studs with Dark Bluish Gray Vent Grille, Gold Decoration and Dark Bluish Gray Panels Pattern (Sticker) - Set 76099 (Counterpart)
* Add 2 Part 14769pb240 Light Bluish Gray Tile, Round 2 x 2 with Bottom Stud Holder with Gold and Light Bluish Gray Panel Pattern (Sticker) - Set 76099 (Counterpart)
* Add 1 Part 14769pb241L Light Bluish Gray Tile, Round 2 x 2 with Bottom Stud Holder with Light Bluish Gray Panel on Gold Decorative Background Pattern Model Left Side (Sticker) - Set 76099 (Counterpart)
* Add 1 Part 14769pb241R Light Bluish Gray Tile, Round 2 x 2 with Bottom Stud Holder with Light Bluish Gray Panel on Gold Decorative Background Pattern Model Right Side (Sticker) - Set 76099 (Counterpart)
* Add 2 Part 98835pb020 Dark Bluish Gray Vehicle, Mudguard 3 x 4 x 1 2/3 Curved Front with 3 Reddish Brown Belts Pattern (Sticker) - Set 76099 (Counterpart)
Comments from Submitter:
Stickered parts.
|
|
Author: | therobo | Posted: | Dec 11, 2018 11:19 | Subject: | Inventory Change Request for Set 75827-1 | Viewed: | 20 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 60601pb018 White Glass for Window 1 x 2 x 2 with Pixelated Ghostbusters Logo and 'PLAY' Pattern (Sticker) - Set 75827 (Counterpart)
|
Author: | therobo | Posted: | Dec 11, 2018 11:18 | Subject: | Inventory Change Request for Set 8678-1 | Viewed: | 17 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 30350cpb033L White Tile, Modified 2 x 3 with 2 Clips (thick U clips) with 'FR ALL FOR ONE allinol' Pattern Model Left Side (Sticker) - Set 8678 (Counterpart)
* Add 1 Part 30350cpb033R White Tile, Modified 2 x 3 with 2 Clips (thick U clips) with 'FR ALL FOR ONE allinol' Pattern Model Right Side (Sticker) - Set 8678 (Counterpart)
|
Author: | therobo | Posted: | Dec 11, 2018 11:17 | Subject: | Inventory Change Request for Set 60147-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 4162pb194 White Tile 1 x 8 with 'Mary' in Black Cursive Pattern (Sticker) - Set 60147-1 (Counterpart)
|
Author: | pikachu3 | Posted: | Dec 11, 2018 10:28 | Subject: | Inventory Change Request for Set 40388-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part {Very Light Bluish Gray to Light Aqua} 20375 Mini Doll, Cape Cloth, Friends, Tapered with Curved Bottom and 1 Small Top Hole
Comments from Submitter:
VLBG has been retired for a while. https://brickset.com/sets/40388-1/Mini-Doll-Dress-Up-Kit
|
|
Author: | bje | Posted: | Dec 11, 2018 09:27 | Subject: | Inventory Change Request for Set 8866-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part x1688pb01 Black Electric, Train Motor 9V RC Train (motor only, no attached wheels) with Red Stripe Pattern (Alternate) (match ID 1)
* Change 1 Part Black x1688 Electric, Train Motor 9V RC Train (motor only, no attached wheels) {match ID 0 to 1}
Comments from Submitter:
From MISB - image to follow.
|
|
Author: | samsam2 | Posted: | Dec 10, 2018 20:46 | Subject: | Inventory Change Request for Set 8269-1 | Viewed: | 25 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part Light Gray {6538 Technic, Axle Connector 2L (Ridged Undetermined Type) to 6538b Technic, Axle Connector 2L (Ridged with x Hole x Orientation)}
* Change 2 Part Dark Gray {731c01 Technic, Shock Absorber 6.5L, Complete Assembly - Undetermined Spring Type to 731c06 Technic, Shock Absorber 6.5L, Complete Assembly - Soft Spring}
Comments from Submitter:
I parted out from a sealed set, just the purple model in its own sealed box. The turquoise model was missing.
|
|
Author: | axaday | Posted: | Dec 10, 2018 18:47 | Subject: | Inventory Change Request for Set 8857-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 2 Part 2997 Black Tire 81.6 x 34 ZR Technic Straight Tread
* Delete 2 Part 2998 White Wheel 81.6 x 34 Six Spoke
* Change 2 Part White 2998c01 Wheel 81.6 x 34, with Black Tire 81.6 x 34 Technic (2998 / 2997) {Counterpart to Regular}
Comments from Submitter:
They come assembled in the set.
|
|
Author: | axaday | Posted: | Dec 10, 2018 18:37 | Subject: | Inventory Change Request for Set 8857-1 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Light Gray {731c01 Technic, Shock Absorber 6.5L, Complete Assembly - Undetermined Spring Type to 731c06 Technic, Shock Absorber 6.5L, Complete Assembly - Soft Spring}
* Change 4 Part Light Gray {6538 Technic, Axle Connector 2L (Ridged Undetermined Type) to 6538a Technic, Axle Connector 2L (Ridged with + Hole + Orientation)}
* Change 2 Part Light Gray {2536 Plant, Tree Palm Trunk - (MARKED FOR DELETION - Undetermined Connector Version) to 2536c Plant, Tree Palm Trunk - Short Connector, Axle Hole with 4 Inside Prongs}
Comments from Submitter:
Sealed Set, Pics to Follow
|
|
Author: | axaday | Posted: | Dec 10, 2018 18:22 | Subject: | Inventory Change Request for Set 6403-1 | Viewed: | 13 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 3673 Light Gray Technic, Pin without Friction Ridges Lengthwise (Extra)
* Add 1 Part 4073 Yellow Plate, Round 1 x 1 Straight Side (Extra)
Comments from Submitter:
Sealed set (not anymore)
|
|
Author: | normann1974 | Posted: | Dec 10, 2018 17:54 | Subject: | Inventory Change Request for Set 60197-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 10 Part bb219 Dark Bluish Gray Train, Track Plastic (RC Trains) Connection/Stacking Pin for Track Storage (Extra)
* Change 1 Part Black {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302b Hinge Plate 1 x 2 Locking with 2 Fingers on End without Bottom Groove}
* Change 1 Part Light Bluish Gray {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302b Hinge Plate 1 x 2 Locking with 2 Fingers on End without Bottom Groove}
Comments from Submitter:
I just bought this set MISB. I contained ungrooved version of the hinge plates and 10 stacking pins.
|
|
Author: | axaday | Posted: | Dec 10, 2018 17:43 | Subject: | Inventory Change Request for Set 6403-1 | Viewed: | 26 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 6 Part Brown {2536 Plant, Tree Palm Trunk - (MARKED FOR DELETION - Undetermined Connector Version) to 2536b Plant, Tree Palm Trunk - Short Connector, no Axle Hole}
Comments from Submitter:
Sealed Set, Pics following
|
|
Author: | axaday | Posted: | Dec 10, 2018 14:50 | Subject: | Inventory Change Request for Set 6338-1 | Viewed: | 20 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Black 4285b Dish 6 x 6 Inverted (Radar) Webbed - Type 2 (underside attachment positions at 90 degrees) {match ID 0 to 1}
* Change 1 Part Black 4285a Dish 6 x 6 Inverted (Radar) Webbed - Type 1 (underside attachable at any position) (Alternate) {match ID 0 to 1}
Comments from Submitter:
I just noticed that the alternate isn't matched up. I didn't know that was possible, but I'm assuming it should be corrected.
|
|
Author: | samsam2 | Posted: | Dec 10, 2018 14:01 | Subject: | Inventory Change Request for Minifig sw534 | Viewed: | 37 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory: [M=sw534]
* Change 1 Part Red {553pb016 Brick, Round 2 x 2 Dome Top with Silver Pattern (R4-P17 / Astromech Droid)) to 553pb023 Brick, Round 2 x 2 Dome Top with Silver Band around Dome Pattern (R4-P17)}
Comments from Submitter:
dome top is with silver band version. Existing image of 553pb016 (should not have silver band) in red shows the silver band. Silver band version is part 553pb023
|
|
Author: | SezaR | Posted: | Dec 10, 2018 06:32 | Subject: | Inventory Change Request for Set 6394-1 | Viewed: | 16 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 18 Part 3641 Black Tire 15mm D. x 6mm Offset Tread Small
* Delete 6 Part 4624 Light Gray Wheel 8mm D. x 6mm
* Delete 12 Part 4624 White Wheel 8mm D. x 6mm
* Change 6 Part Light Gray 4624c02 Wheel 8mm D. x 6mm with Black Tire 15mm D. x 6mm Offset Tread Small (4624 / 3641) {Counterpart to Regular}
* Change 12 Part White 4624c02 Wheel 8mm D. x 6mm with Black Tire 15mm D. x 6mm Offset Tread Small (4624 / 3641) {Counterpart to Regular}
|
|
|
Author: | randyf | Posted: | Dec 10, 2018 01:25 | Subject: | Inventory Change Request for Set 1560-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 2 Part 3139 Black Tire 14mm D. x 4mm Smooth Small Single
* Delete 2 Part 4624 Light Gray Wheel 8mm D. x 6mm
* Change 2 Part Light Gray 4624c01 Wheel 8mm D. x 6mm with Black Tire 14mm D. x 4mm Smooth Small Single (4624 / 3139) {Counterpart to Regular}
Comments from Submitter:
Image to follow.
|
|
Author: | StormChaser | Posted: | Dec 10, 2018 00:54 | Subject: | Inventory Change Request for Set 8091-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part 3039pb094 Dark Bluish Gray Slope 45 2 x 2 with Red and Gray Buttons and Controls Pattern (Sticker) (Counterpart)
* Add 1 Part 3039pb119 Dark Bluish Gray Slope 45 2 x 2 with Dark Red and Gray Buttons and Controls Pattern (Sticker) (Counterpart)
Comments from Submitter:
https://www.bricklink.com/message.asp?ID=1118942
|
|
Author: | bb724134 | Posted: | Dec 9, 2018 21:07 | Subject: | Inventory Change Request for Set 7251-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part 6246f Dark Bluish Gray Minifigure, Utensil Tool Oil Can - Smooth Handle
Comments from Submitter:
Please re-check the inventory, I have this Transformation set and while it definitely includes 5 dark bluish gray tools, it does not seem to have this little oil can, the instructions do not show the oil can on any page.
Thanks for your time and trouble, your inventories have been an ENORMOUS help to me.
|
|
Author: | SezaR | Posted: | Dec 9, 2018 21:04 | Subject: | Inventory Change Request for Set 1563-1 | Viewed: | 16 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 2 Part 3641 Black Tire 15mm D. x 6mm Offset Tread Small
* Delete 2 Part 4084 Black Tire 21mm D. x 9mm Offset Tread Medium
* Delete 4 Part 4624 White Wheel 8mm D. x 6mm
* Change 2 Part White 4624c02 Wheel 8mm D. x 6mm with Black Tire 15mm D. x 6mm Offset Tread Small (4624 / 3641) {Counterpart to Regular}
* Change 2 Part White 4624c03 Wheel 8mm D. x 6mm with Black Tire 21mm D. x 9mm Offset Tread Medium (4624 / 4084) {Counterpart to Regular}
|
|
Author: | Brixalotl | Posted: | Dec 9, 2018 15:42 | Subject: | Inventory Change Request for Set 76028-1 | Viewed: | 17 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 2 Part 44301 Dark Bluish Gray Hinge Plate 1 x 2 Locking with 1 Finger On End (undetermined type)
* Add 2 Part 44301b Dark Bluish Gray Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove
* Delete 2 Part 44302 Yellow Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type)
* Add 2 Part 44302a Yellow Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove
Comments from Submitter:
confirmed during part-out, thanks
|
|
|
Author: | FreeStorm | Posted: | Dec 9, 2018 13:15 | Subject: | Inventory Change Request for Set 1477-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 4 Part 3641 Black Tire 15mm D. x 6mm Offset Tread Small
* Delete 4 Part 4624 White Wheel 8mm D. x 6mm
* Change 4 Part White 4624c02 Wheel 8mm D. x 6mm with Black Tire 15mm D. x 6mm Offset Tread Small (4624 / 3641) {Counterpart to Regular}
Comments from Submitter:
Source file:
http://www.brickshelf.com/gallery/CP5670/SetParts/6503-1477.jpg
|
|
Author: | FreeStorm | Posted: | Dec 9, 2018 13:14 | Subject: | Inventory Change Request for Set 6503-1 | Viewed: | 13 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 4 Part 3641 Black Tire 15mm D. x 6mm Offset Tread Small
* Delete 4 Part 4624 White Wheel 8mm D. x 6mm
* Change 4 Part White 4624c02 Wheel 8mm D. x 6mm with Black Tire 15mm D. x 6mm Offset Tread Small (4624 / 3641) {Counterpart to Regular}
Comments from Submitter:
Source file:
http://www.brickshelf.com/gallery/CP5670/SetParts/6503-1477.jpg
|
|
Author: | bb793058 | Posted: | Dec 9, 2018 08:56 | Subject: | details in "Confirm store selection" | Viewed: | 78 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
| Hi,
In my opinion, during the selection of stores in the panel "buy", the information
on the windows "Confirm Store Selection" or "Edit Store Selection" are not sufficient.
I face 2 main problems :
1) Once I've finished to select sellers, I must create a cart to access the
"notes from seller".
In fact "new" or "used" are not enough detailled. For used parts, these notes
are important because some parts could be used in good condition, or used in
bad condition (for example "yellowed", or "scratched").
Furthermore, by creating carts, I book parts before be sure that their conditions
will fit my needs. And during my check, they are not available for other people.
-- I suggest to add the column "note from seller" in the windows "Confirm
Store Selection" and "Edit Store Selection" (picture "edit store")
2) When I need huge amount of parts ( ~3000 ), during the store selection I don't
find the information of how many required parts a store have for me.
-- In windows "Confirm Store Selection" or "Edit Store Selection", I would
appreciate to have the global value of "Total buying" parts in the current storen
near the total cost. (picture edit store)
-- In the tag "Buy", could the column "Item count" of the stores list counts
only the availables parts I need ? ( if store has parts ID 3001 x4000, but I
need x26, do not count 4000 but 26). (picture "buy wanted list")
|
|
|
Author: | mjwest83 | Posted: | Dec 8, 2018 20:08 | Subject: | Inventory Change Request for Set 76081-1 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 3245cpb089 Dark Bluish Gray Brick 1 x 2 x 2 with Rip Exposing Abilisk Skin Pattern Facing Down (Sticker) - Set 76081 (Counterpart)
* Add 1 Part 3245cpb088 Dark Bluish Gray Brick 1 x 2 x 2 with Rip Exposing Abilisk Skin Pattern Facing Up (Sticker) - Set 76081 (Counterpart)
|
|
Author: | Adjour | Posted: | Dec 8, 2018 15:42 | Subject: | M tron and our terrible search engine | Viewed: | 133 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
| Can we do anything about the fact that searching "mtron" and "m tron" bring up
different results?
Also the search engine doesn't recognize apostrophes. Like I can search "Emma
house" but "Emma's house" give me an error message.
Thanks for the consideration.
|
|
Author: | Trickitty | Posted: | Dec 8, 2018 14:29 | Subject: | Want List: Sort prefs and image lightbox | Viewed: | 40 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
| Apologies if either of these have been suggested before, they are huge frustrations
for me.
An annoyance I experience with the Want List main page is having to change the
Sort By from Newest to Alphabetically each and every time I visit the page. I
have over 30 lists and could care less when they were created, I just want to
quickly find the one I'm looking for. So, can the Sort order be permanently
saved or turned into an account preference?
Second, in almost every place that parts are listed on BL (including order details),
one can click on the image to see a bigger version in a lightbox modal... that
is, everywhere except for wanted lists. Please consider making the images there
also lightboxes, because it's cumbersome having to open item detail pages
just to get a better view.
Thank you.
|
|
Author: | elias3 | Posted: | Dec 8, 2018 13:03 | Subject: | Inventory Change Request for Set 75876-1 | Viewed: | 26 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 4 Part Light Bluish Gray {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (undetermined type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}
|
|
Author: | hobbyist69 | Posted: | Dec 8, 2018 06:35 | Subject: | Inventory Change Request for Set 2818-1 | Viewed: | 15 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part sleepbag06 White Duplo Cloth Sleeping Bag with Pink and Blue Bunny Pattern (Alternate) (match ID 1)
* Change 1 Part White sleepbag07 Duplo Cloth Sleeping Bag with Blue, Lime, Red and Yellow Bunny Pattern {Regular to Alternate} {match ID 0 to 1}
Comments from Submitter:
I recently bought a second hand set (no box or instructions) which had every part of this set correct except that this sleeping bag was the two tone version rather than multi-coloured version. This is backed up by some pictures of set 2818 on the internet.
|
|
Author: | mockingbird | Posted: | Dec 8, 2018 05:42 | Subject: | set 10205 extra parts question | Viewed: | 43 times | Topic: | Inventories | Status: | Open | |
| As far as I can see (maybe I overlooked something):
In the regular section of the inventory there are parts that are not used in
the main model (and the instructions or box do not show any secondary model):
1x black brick 1x2
2x black plate 1x1 clip horizontal
2x black slope inverted 75 2x1x3
1x black tile 1x4
But then in the extra parts section of set 10205 are 2x black panel 1x2x3 (2362b).
Shouldn't these two panels also be moved to the regular section?
Or should all these parts be moved to the 'extra' section as the secondary
model is not in the instructions?
|
|
Author: | Hygrotus | Posted: | Dec 8, 2018 04:48 | Subject: | Inventory Change Request for Set 4207-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 3 Part Yellow {4599 Tap 1 x 1 - (MARKED FOR DELETION - Undetermined Nozzle End Version) to 4599b Tap 1 x 1 without Hole in Nozzle End}
Comments from Submitter:
Additional informations to follow.
|
Author: | Hygrotus | Posted: | Dec 8, 2018 04:35 | Subject: | Inventory Change Request for Set 4430-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Yellow {4599 Tap 1 x 1 - (MARKED FOR DELETION - Undetermined Nozzle End Version) to 4599b Tap 1 x 1 without Hole in Nozzle End}
Comments from Submitter:
Additional information to follow.
|
|
Author: | SezaR | Posted: | Dec 8, 2018 00:09 | Subject: | Inventory Change Request for Set 6980-1 | Viewed: | 26 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 6 Part 4073 Trans-Green Plate, Round 1 x 1 Straight Side
* Delete 7 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side
* Delete 1 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side (Extra)
* Add 3 Part 4073c01 Trans-Green Plate, Round 1 x 1, 2 on Sprue
* Add 4 Part 4073c01 Trans-Red Plate, Round 1 x 1, 2 on Sprue
|
|
Author: | SezaR | Posted: | Dec 7, 2018 23:26 | Subject: | Inventory Change Request for Set 7722-1 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 3003old Black Brick 2 x 2 without Inside Supports (match ID 4)
* Delete 2 Part 4073 Red Plate, Round 1 x 1 Straight Side
* Delete 4 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side
* Delete 2 Part 4073 Trans-Yellow Plate, Round 1 x 1 Straight Side
* Delete 2 Part 4073 Trans-Clear Plate, Round 1 x 1 Straight Side
* Add 1 Part 4073c01 Red Plate, Round 1 x 1, 2 on Sprue
* Add 2 Part 4073c01 Trans-Red Plate, Round 1 x 1, 2 on Sprue
* Add 1 Part 4073c01 Trans-Clear Plate, Round 1 x 1, 2 on Sprue
* Add 1 Part 4073c01 Trans-Yellow Plate, Round 1 x 1, 2 on Sprue
* Change 2 Part Black 3003 Brick 2 x 2 {Regular to Alternate} {match ID 0 to 4}
|
|
Author: | axaday | Posted: | Dec 7, 2018 22:52 | Subject: | Inventory Change Request for Set 10230-1 | Viewed: | 28 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Black {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove}
Comments from Submitter:
I got this set when it was new and have looked for it several times to fix the inventory. Today I stumbled upon it by accident.
Concerning taps, what is our endgame? I have LBG nozzle with no hole and that is in the inventory as alternates. (no information on the white ones because I never built that building) But no one has come forward with a no nozzle for many years. I tried to study the change log to figure out a clear timeline and I got lost. But I think the undetermined taps should either be turned to hole in nozzle or taken out of the inventory.
|
|
Author: | axaday | Posted: | Dec 7, 2018 22:32 | Subject: | Inventory Change Request for Set 75212-1 | Viewed: | 13 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Dark Bluish Gray {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove}
Comments from Submitter:
Personal Collection
|
Author: | axaday | Posted: | Dec 7, 2018 22:31 | Subject: | Inventory Change Request for Set 9493-1 | Viewed: | 14 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part Light Bluish Gray {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove}
Comments from Submitter:
Personal Collection
|
|
Author: | axaday | Posted: | Dec 7, 2018 19:44 | Subject: | Inventory Change Request for Set 70588-1 | Viewed: | 15 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Dark Bluish Gray {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove}
Comments from Submitter:
I have this model in my office. The piece is not used well in my opinion.
|
|
Author: | axaday | Posted: | Dec 7, 2018 19:42 | Subject: | Inventory Change Request for Set 70631-1 | Viewed: | 13 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 44302a White Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove (Alternate) (match ID 1)
* Change 1 Part White {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302b Hinge Plate 1 x 2 Locking with 2 Fingers on End without Bottom Groove} {Regular to Alternate} {match ID 0 to 1}
Comments from Submitter:
I parted out 3 of this set. 2 had b and the other had a
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|