Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | StormChaser  | | Posted: | Dec 5, 2018 17:01 | | Subject: | Inventory Change Request for Set 9252-2 | | Viewed: | 18 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 12 Part 3002old Yellow Brick 2 x 3 without Cross Supports (Alternate) (match ID 1)
* Change 12 Part Yellow 3002 Brick 2 x 3 {match ID 0 to 1}
Comments from Submitter:
Another message follows.
|
 |
| Author: | Turribrick | | Posted: | Dec 5, 2018 15:44 | | Subject: | Inventory Change Request for Set 31045-1 | | Viewed: | 16 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Dark Bluish Gray {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove}
Comments from Submitter:
Verified from sealed set contents.
|
| Author: | Hygrotus | | Posted: | Dec 5, 2018 15:32 | | Subject: | Re: 42082 extra items | | Viewed: | 26 times | | Topic: | Inventories | |
| In Inventories, xxxzanka writes:
| | It seems to me one trans clear 1x1 plate is missing as extra parts (I have 3
in step 8 bags, 2 used in step 8).
Giancarlo
|
Thank you for finding this. Inventory of this set has been corrected.
https://www.bricklink.com/message.asp?ID=1118448
|
|
|
| Author: | Hygrotus | | Posted: | Dec 5, 2018 15:21 | | Subject: | Re: Inventory Change Request for Set 107-1 | | Viewed: | 21 times | | Topic: | Inventories Requests | |
| In Inventories Requests, SezaR writes:
| | In Inventories Requests, Hygrotus writes:
| | In Inventories Requests, SezaR writes:
| | Marek, is it possible to leave this request open? I am busy now, but I can work
more on it.
|
You have only this one now pending in this bunch of requests
adding of this part as alternate
All other are now approved or rejected.
You didn't show any proof for it yet.
|
I was confused between the blue connector
[p=bb141c01]
and
[p=bb236bc01]
The wire with connector
comes with the connector
[p=bb236bc01]
These things should be fixed (better photos to be added, wires need to have an
inventory so that we can easily see what connector comes with what wire)
I did not know that the blue connector
[p=bb141c01]
exists (thought it exists only in light gray). Currently, it appears only with
the set 901-1 (only released in US) but it is listed ONLY by European sellers.
With what set did these European sellers find it? (I don't know, but my guess
is 107-1)
The box art of 107-1 shows the blue connector
[p=bb141c01]
but the box art and instructions of sets 182-1 and 183-1 shows the connectors
[p=bb236bc01]
The white wire with blue connector bb141c01 is not yet added to the catalog of
BL. If the inventory admins decide to keep bb141c01 with 107-1, somebody should
first add it but I don't have any copy of this blue connector.
|
Sorry for the long wait for conclude this request
Exactly part assembly plugs with wire which you want to add to the set to replace
separate entries of plugs an wire are not the same, plugs variant is diffrent
in assembly than variant of blue plugs which was in this inventory.
I will return the original blue plug and white wire which were there before this
request to regular section of this inventory and move 996bc96gray to alternate.
So as this part which left in this request is wrong for this set (wrong variant
of plugs) this will be rejected.
We can return to this inventory when correct plug and wire assembly will be added
to the catalog with photo.
|
|
| Author: | Turribrick | | Posted: | Dec 5, 2018 15:15 | | Subject: | Inventory Change Request for Set 60158-1 | | Viewed: | 20 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Change 4 Part Dark Bluish Gray {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (undetermined type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}
Comments from Submitter:
Verified from sealed set contents.
|
|
| Author: | Turribrick | | Posted: | Dec 5, 2018 14:59 | | Subject: | Inventory Change Request for Set 60192-1 | | Viewed: | 27 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Change 8 Part Light Bluish Gray {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302b Hinge Plate 1 x 2 Locking with 2 Fingers on End without Bottom Groove}
* Change 8 Part Light Bluish Gray {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (undetermined type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}
Comments from Submitter:
Verified from sealed set contents.
|
|
| Author: | jagaboo | | Posted: | Dec 5, 2018 14:21 | | Subject: | Re: Part #30027u - Wheel 8mm D. x 9mm (for Slicks | | Viewed: | 20 times | | Topic: | Catalog | |
| Never mind!!! I figured it out...SORRY!!
In Catalog, jagaboo writes:
| | Notice the image of Part 30027u, showing 3 views of the part. The bottom view
of it doesn’t have any notches. All my 30027u’s look like this...no notches.
Looking at the photo of all the other similar parts, all versions are notched.
Shouldn't 30027u remain or be given a different part number?
|
|
| Author: | jagaboo | | Posted: | Dec 5, 2018 14:17 | | Subject: | Part #30027u - Wheel 8mm D. x 9mm (for Slicks | | Viewed: | 34 times | | Topic: | Catalog | | Status: | Open | |
| Notice the image of Part 30027u, showing 3 views of the part. The bottom view
of it doesn’t have any notches. All my 30027u’s look like this...no notches.
Looking at the photo of all the other similar parts, all versions are notched.
Shouldn't 30027u remain or be given a different part number?
|
|
|
| Author: | StormChaser | | Posted: | Dec 5, 2018 14:01 | | Subject: | Inventory Change Request for Set 9252-1 | | Viewed: | 27 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Delete 4 Minifig 4224c01 Basic Figure Finger Puppet Female (bfp001) (match ID 1)
* Delete 4 Minifig 4224c02 Basic Figure Finger Puppet Male (bfp002) (match ID 1)
* Change 1 Part Black 4744px15 Brick, Modified 2 x 4 x 2 Double Curved Top with Yellow Face, Moustache Pattern {Alternate to Regular} {match ID 1 to 0}
* Change 1 Part Black 4744px9 Brick, Modified 2 x 4 x 2 Double Curved Top with Yellow Face, Simple Pattern {Alternate to Regular} {match ID 1 to 0}
* Change 2 Part Black 4744px14 Brick, Modified 2 x 4 x 2 Double Curved Top with Yellow Face, Woman Pattern {Alternate to Regular} {match ID 1 to 0}
* Change 1 Part Red 4744px3 Brick, Modified 2 x 4 x 2 Double Curved Top with Yellow Face, Freckles and Ears Pattern {Alternate to Regular} {match ID 1 to 0}
* Change 1 Part Red 4744px15 Brick, Modified 2 x 4 x 2 Double Curved Top with Yellow Face, Moustache Pattern {Alternate to Regular} {match ID 1 to 0}
* Change 2 Part White 4744px16 Brick, Modified 2 x 4 x 2 Double Curved Top with Baby Face Pacifier Pattern {Alternate to Regular} {match ID 1 to 0}
Comments from Submitter:
Am creating a new catalog entry for the early version of the set to avoid an unnecessarily complicated inventory.
|
|
| Author: | mjwest83 | | Posted: | Dec 5, 2018 11:54 | | Subject: | Inventory Change Request for Set 76075-1 | | Viewed: | 20 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 15068pb154L Dark Bluish Gray Slope, Curved 2 x 2 No Studs with Dark Tan Belt over Pearl Dark Gray Armor Model Left Pattern (Sticker) - Set 76075 (Counterpart)
* Add 1 Part 15068pb154R Dark Bluish Gray Slope, Curved 2 x 2 No Studs with Dark Tan Belt over Pearl Dark Gray Armor Model Right Pattern (Sticker) - Set 76075 (Counterpart)
* Add 1 Part 3068bpb1193 Dark Bluish Gray Tile 2 x 2 with Dark Tan Belt over Pearl Dark Gray Armor Center Pattern (Sticker) - Set 76075 (Counterpart)
* Add 1 Part 87079pb532 Dark Bluish Gray Tile 2 x 4 with Pearl Dark Gray Armor and Metallic Silver Spikes on Reddish Brown Sash Lower Pattern (Sticker) - Set 76075 (Counterpart)
* Add 1 Part 87079pb531 Dark Bluish Gray Tile 2 x 4 with Pearl Dark Gray Armor, Dark Tan Fur, and Metallic Silver Spikes on Reddish Brown Sash Upper Pattern (Sticker) - Set 76075 (Counterpart)
Comments from Submitter:
Stickered items for Ares.
|
|
| Author: | littlepb | | Posted: | Dec 5, 2018 11:34 | | Subject: | Re: 60592c01 - whos idea was this? | | Viewed: | 41 times | | Topic: | Catalog | |
| In Catalog, mhortar writes:
| | In Catalog, brox999 writes:
| | In Catalog, SylvainLS writes:
| | In Catalog, brox999 writes:
| | […]
[3930c01] is in many new sets
|
Not.
The hinge brick and the hinge plate always came separated.
| | and I need
the ability to add this part to my store inventory in a new state […]
|
This assembly can’t be New: you have assembled the parts yourself, that’s the
definition of Used.
|
Rubbish, putting two brand new, unused parts together does not make them used.
I list the assembly as new if the parts came from a sealed set
|
You assembled the parts. That's literally the definition of what makes them
used (previously assembled). You can't build a set and then sell it as 'new,
only assembled once'. There was a big argument a few years ago about whether
stacking bricks/plates at the Pick-A-Brick wall made them 'used' instead
of 'new' (my opinion is yes). There's also the argument that minifigs
can't be sold as 'new' if they are assembled (I'm on the fence
about this one).
Josh
Josh
|
I personally think that assembled hinges can be marked as new because they have
not been taken apart and if a buyer wants separated parts, they can order them
separately. Maybe there should be an option for marking the condition of inventories
as "new but assembled".
|
|
| Author: | littlepb | | Posted: | Dec 5, 2018 11:12 | | Subject: | Re: Large Macaroni tile in classic blue? | | Viewed: | 33 times | | Topic: | Catalog | |
| In Catalog, Hygrotus writes:
| | In General, celloguy writes:
Isn't this part on real photo there just dark azure, but it's look like
this due to lighting condition of photo?
|
I think that that's what it is
|
|
| Author: | yorbrick | | Posted: | Dec 5, 2018 09:19 | | Subject: | Re: 60592c01 - whos idea was this? | | Viewed: | 45 times | | Topic: | Catalog | |
| | | It has been sometime I am thinking about this one:
Does opening the screws (located on the top) and removing the motor housing in
order to check the production date make this old motors used? (these motors were
not sealed in any way, so opening the motor is very easy: one only need to open
the screws)
|
I'd say used, as there is the possibility of damage when opening it. Of course,
you could test it by applynig power to it, but that makes it used. There will
also be minor wear on the screws, just like clicking two bricks together and
unclicking them causes wear and makes them used.
|
|
| Author: | yorbrick | | Posted: | Dec 5, 2018 09:17 | | Subject: | Re: 60592c01 - whos idea was this? | | Viewed: | 39 times | | Topic: | Catalog | |
| | | You assembled the parts. That's literally the definition of what makes them
used (previously assembled). You can't build a set and then sell it as 'new,
only assembled once'. There was a big argument a few years ago about whether
stacking bricks/plates at the Pick-A-Brick wall made them 'used' instead
of 'new' (my opinion is yes). There's also the argument that minifigs
can't be sold as 'new' if they are assembled (I'm on the fence
about this one).
|
Just to correct that, the argument about minifigures is can a seller assemble
them and still call them new. There is no argument about can a minifigure be
new if it is assembled - the answer is clearly yes, as in some cases LEGO sells
assembled minifigures and by definition those assembled minifigures can be new
as that is how they were sold.
|
|
| Author: | SylvainLS | | Posted: | Dec 5, 2018 07:26 | | Subject: | Re: 60592c01 - whos idea was this? | | Viewed: | 76 times | | Topic: | Catalog | |
| In Catalog, SezaR writes:
| | […]
It has been sometime I am thinking about this one:
Does opening the screws (located on the top) and removing the motor housing in
order to check the production date make this old motors used? (these motors were
not sealed in any way, so opening the motor is very easy: one only need to open
the screws)
|
Well, the definition says New should have been manipulated for sorting only.
Opening isn’t sorting… unless you sort by production date 
Now, it’s about screws, not clicking plastic parts, so it’s less “Used” than,
say, removing arms from a torso, but some may see it as “Used” nonetheless.
|
|
| Author: | Teup | | Posted: | Dec 5, 2018 07:22 | | Subject: | Re: Automatic price while listing items | | Viewed: | 33 times | | Topic: | Suggestions | |
| In Suggestions, EpicBigG writes:
| | I hope bricklink sees this!
|
They do, but they won't do anything.
|
| Author: | TakeAbricK | | Posted: | Dec 5, 2018 06:05 | | Subject: | Inventory Change Request for Set 809-1 | | Viewed: | 25 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Red {73436 Door 1 x 4 x 5 Left - (MARKED FOR DELETION - Undetermined Glass Color Version) to 73436c01 Door 1 x 4 x 5 Left with Trans-Clear Glass}
* Change 1 Part Red {73435 Door 1 x 4 x 5 Right - (MARKED FOR DELETION - Undetermined Glass Color Version) to 73435c01 Door 1 x 4 x 5 Right with Trans-Clear Glass}
Comments from Submitter:
Source: Sealed Set
|
|
| Author: | SezaR | | Posted: | Dec 5, 2018 05:20 | | Subject: | Re: Inventory Change Request for Set 7735-1 | | Viewed: | 18 times | | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| | OK, got it. 
By the way, thanks very much for helping me with these inventory changes. If
you can find any evidence for any other sets in the 1980-1992 range that included
1x1 round plates, it would be greatly appreciated.
Cheers,
Randy
|
You are welcome. 
It seems I ran out of photo for now! (but I will double-check)
Cheers
Reza
| |
In Inventories Requests, SezaR writes:
| | In Inventories Requests, randyf writes:
| | In Inventories Requests, SezaR writes:
| | In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Delete 6 Part 4073 Trans-Clear Plate, Round 1 x 1 Straight Side
* Delete 6 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side
* Add 3 Part 4073c01 Trans-Red Plate, Round 1 x 1, 2 on Sprue
* Add 3 Part 4073c01 Trans-Clear Plate, Round 1 x 1, 2 on Sprue
|
|
Reza -
Assuming that you know where the images are located on the web, could you please
add hyperlinks to where you find the images in your requests?
The hyperlinks may not always be valid, but at least I can look them over for
now.
Thanks,
Randy
|
Randy,
I have saved many photos of used, MISB, or sealed copies for various train sets
from 80s and even before 80s. I got them either from their owners or from past
auctions. So I cannot always find any link as those links are mostly broken by
now. My friend Morris (lego.12vtrains) has saved many photos since 2014-15 and
shared them with me.
For this set, I have photos of many copies. I have also bought an MISB one and
it is currently in the custom office.
One photo is taken from the store Bluxe. You can find easily his photos on facebook.
Search Bluxe. (can I add a link to facebook here?)
Nkiss82 sent me photos of his MISB copy. I used them already for this request:
https://www.bricklink.com/messageThread.asp?ID=244678
Thanks,
Reza
|
|
|
|
| Author: | SezaR | | Posted: | Dec 5, 2018 05:11 | | Subject: | Re: Inventory Change Request for Set 6982-1 | | Viewed: | 11 times | | Topic: | Inventories Requests | |
| In Inventories Requests, Hygrotus writes:
| | In Inventories Requests, SezaR writes:
| | * Delete 2 Part 4600 Light Gray Plate, Modified 2 x 2 with Wheels Holder
|
You wanted to delete tire to this wheel assembly rather than plate, yes?
|
Based on this mistake, if you revoke all my honored points, it is fair and I
don't complain
|
| Author: | SezaR | | Posted: | Dec 5, 2018 05:09 | | Subject: | Re: Inventory Change Request for Set 6982-1 | | Viewed: | 13 times | | Topic: | Inventories Requests | |
| In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Delete 4 Part 4084 Black Tire 21mm D. x 9mm Offset Tread Medium
* Delete 4 Part 4624 White Wheel 8mm D. x 6mm
* Change 4 Part White 4624c03 Wheel 8mm D. x 6mm with Black Tire 21mm D. x 9mm Offset Tread Medium (4624 / 4084) {Counterpart to Regular}
|
|
|
|
| Author: | SezaR | | Posted: | Dec 5, 2018 05:09 | | Subject: | Inventory Change Request for Set 6982-1 | | Viewed: | 18 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Delete 4 Part 4084 Black Tire 21mm D. x 9mm Offset Tread Medium
* Delete 4 Part 4624 White Wheel 8mm D. x 6mm
* Change 4 Part White 4624c03 Wheel 8mm D. x 6mm with Black Tire 21mm D. x 9mm Offset Tread Medium (4624 / 4084) {Counterpart to Regular}
|
| Author: | SezaR | | Posted: | Dec 5, 2018 05:08 | | Subject: | Re: Inventory Change Request for Set 6982-1 | | Viewed: | 10 times | | Topic: | Inventories Requests | |
| In Inventories Requests, Hygrotus writes:
| | In Inventories Requests, SezaR writes:
| | * Delete 2 Part 4600 Light Gray Plate, Modified 2 x 2 with Wheels Holder
|
You wanted to delete tire to this wheel assembly rather than plate, yes?
|
hmmmm, that seems to be a historic mistake!
|
| Author: | Hygrotus | | Posted: | Dec 5, 2018 04:50 | | Subject: | Re: Large Macaroni tile in classic blue? | | Viewed: | 40 times | | Topic: | Catalog | |
| In General, celloguy writes:
Isn't this part on real photo there just dark azure, but it's look like
this due to lighting condition of photo?
|
|
| Author: | Hygrotus | | Posted: | Dec 5, 2018 04:47 | | Subject: | Re: Inventory Change Request for Set 6982-1 | | Viewed: | 12 times | | Topic: | Inventories Requests | |
| In Inventories Requests, SezaR writes:
| | * Delete 2 Part 4600 Light Gray Plate, Modified 2 x 2 with Wheels Holder
|
You wanted to delete tire to this wheel assembly rather than plate, yes?
|
|
| Author: | SezaR | | Posted: | Dec 5, 2018 04:24 | | Subject: | Re: Inventory Change Request for Set 6982-1 | | Viewed: | 9 times | | Topic: | Inventories Requests | |
| In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Delete 2 Part 4600 Light Gray Plate, Modified 2 x 2 with Wheels Holder
* Delete 4 Part 4624 White Wheel 8mm D. x 6mm
* Change 4 Part White 4624c03 Wheel 8mm D. x 6mm with Black Tire 21mm D. x 9mm Offset Tread Medium (4624 / 4084) {Counterpart to Regular}
|
|
|
|
| Author: | SezaR | | Posted: | Dec 5, 2018 04:24 | | Subject: | Inventory Change Request for Set 6982-1 | | Viewed: | 17 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Delete 2 Part 4600 Light Gray Plate, Modified 2 x 2 with Wheels Holder
* Delete 4 Part 4624 White Wheel 8mm D. x 6mm
* Change 4 Part White 4624c03 Wheel 8mm D. x 6mm with Black Tire 21mm D. x 9mm Offset Tread Medium (4624 / 4084) {Counterpart to Regular}
|
|
| Author: | Andrsv | | Posted: | Dec 5, 2018 02:13 | | Subject: | Re: Automatic price while listing items | | Viewed: | 26 times | | Topic: | Suggestions | |
| In Suggestions, Rainey writes:
| | I just bought a MacBook Pro and it is very fast! But it has got me wishing that
Bricklink had a seller feature that would automatically have the average price
(or what ever price you set it as) put in the box while adding items like brickOwl
does. I also love how brickOwl has the option to add the same part in multiple
colors at the same time and I really wish Bricklink had the same! I also like
it that if I posted a suggestion in the BrickOwl Forum for a new seller feature,
it would be done in a matter of a few minutes (most likely). I hope this seller
feature suggestion can be acted upon quickly and not years later to never.
Rainey
|
I agree 100% with everything you ask for!
|
|
| Author: | randyf | | Posted: | Dec 5, 2018 01:17 | | Subject: | Re: Inventory Change Request for Set 6604-1 | | Viewed: | 17 times | | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| | Please make changes to the following inventory:
* Delete 4 Part 3641 Black Tire 15mm D. x 6mm Offset Tread Small
* Delete 4 Part 4624 White Wheel 8mm D. x 6mm
* Change 4 Part White 4624c02 Wheel 8mm D. x 6mm with Black Tire 15mm D. x 6mm Offset Tread Small (4624 / 3641) {Counterpart to Regular}
* Change {2 to 1} Part Trans-Red {4073 Plate, Round 1 x 1 Straight Side to 4073c01 Plate, Round 1 x 1, 2 on Sprue}
Comments from Submitter:
Images to follow.
|
Set unboxing can be found here: http://www.brickshelf.com/cgi-bin/gallery.cgi?f=403815
Additional note:
The helmet for from this set unboxing is
|
|
|
| Author: | randyf | | Posted: | Dec 5, 2018 01:05 | | Subject: | Inventory Change Request for Set 6604-1 | | Viewed: | 23 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Delete 4 Part 3641 Black Tire 15mm D. x 6mm Offset Tread Small
* Delete 4 Part 4624 White Wheel 8mm D. x 6mm
* Change 4 Part White 4624c02 Wheel 8mm D. x 6mm with Black Tire 15mm D. x 6mm Offset Tread Small (4624 / 3641) {Counterpart to Regular}
* Change {2 to 1} Part Trans-Red {4073 Plate, Round 1 x 1 Straight Side to 4073c01 Plate, Round 1 x 1, 2 on Sprue}
Comments from Submitter:
Images to follow.
|
|
| Author: | randyf | | Posted: | Dec 5, 2018 00:46 | | Subject: | Re: Inventory Change Request for Set 7735-1 | | Viewed: | 16 times | | Topic: | Inventories Requests | |
| OK, got it.
By the way, thanks very much for helping me with these inventory changes. If
you can find any evidence for any other sets in the 1980-1992 range that included
1x1 round plates, it would be greatly appreciated.
Cheers,
Randy
In Inventories Requests, SezaR writes:
| | In Inventories Requests, randyf writes:
| | In Inventories Requests, SezaR writes:
| | In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Delete 6 Part 4073 Trans-Clear Plate, Round 1 x 1 Straight Side
* Delete 6 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side
* Add 3 Part 4073c01 Trans-Red Plate, Round 1 x 1, 2 on Sprue
* Add 3 Part 4073c01 Trans-Clear Plate, Round 1 x 1, 2 on Sprue
|
|
Reza -
Assuming that you know where the images are located on the web, could you please
add hyperlinks to where you find the images in your requests?
The hyperlinks may not always be valid, but at least I can look them over for
now.
Thanks,
Randy
|
Randy,
I have saved many photos of used, MISB, or sealed copies for various train sets
from 80s and even before 80s. I got them either from their owners or from past
auctions. So I cannot always find any link as those links are mostly broken by
now. My friend Morris (lego.12vtrains) has saved many photos since 2014-15 and
shared them with me.
For this set, I have photos of many copies. I have also bought an MISB one and
it is currently in the custom office.
One photo is taken from the store Bluxe. You can find easily his photos on facebook.
Search Bluxe. (can I add a link to facebook here?)
Nkiss82 sent me photos of his MISB copy. I used them already for this request:
https://www.bricklink.com/messageThread.asp?ID=244678
Thanks,
Reza
|
|
|
| Author: | SezaR | | Posted: | Dec 5, 2018 00:17 | | Subject: | Re: 60592c01 - whos idea was this? | | Viewed: | 50 times | | Topic: | Catalog | |
| In Catalog, SylvainLS writes:
| | In Catalog, brox999 writes:
| | […]
[3930c01] is in many new sets
|
Not.
The hinge brick and the hinge plate always came separated.
| | and I need
the ability to add this part to my store inventory in a new state […]
|
This assembly can’t be New: you have assembled the parts yourself, that’s the
definition of Used.
|
It has been sometime I am thinking about this one:
Does opening the screws (located on the top) and removing the motor housing in
order to check the production date make this old motors used? (these motors were
not sealed in any way, so opening the motor is very easy: one only need to open
the screws)
|
|
| Author: | mhortar | | Posted: | Dec 5, 2018 00:04 | | Subject: | Re: 60592c01 - whos idea was this? | | Viewed: | 57 times | | Topic: | Catalog | |
| In Catalog, brox999 writes:
| | In Catalog, SylvainLS writes:
| | In Catalog, brox999 writes:
| | […]
[3930c01] is in many new sets
|
Not.
The hinge brick and the hinge plate always came separated.
| | and I need
the ability to add this part to my store inventory in a new state […]
|
This assembly can’t be New: you have assembled the parts yourself, that’s the
definition of Used.
|
Rubbish, putting two brand new, unused parts together does not make them used.
I list the assembly as new if the parts came from a sealed set
|
You assembled the parts. That's literally the definition of what makes them
used (previously assembled). You can't build a set and then sell it as 'new,
only assembled once'. There was a big argument a few years ago about whether
stacking bricks/plates at the Pick-A-Brick wall made them 'used' instead
of 'new' (my opinion is yes). There's also the argument that minifigs
can't be sold as 'new' if they are assembled (I'm on the fence
about this one).
Josh
Josh
|
|
| Author: | SezaR | | Posted: | Dec 4, 2018 23:27 | | Subject: | Re: Inventory Change Request for Set 7735-1 | | Viewed: | 19 times | | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| | In Inventories Requests, SezaR writes:
| | In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Delete 6 Part 4073 Trans-Clear Plate, Round 1 x 1 Straight Side
* Delete 6 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side
* Add 3 Part 4073c01 Trans-Red Plate, Round 1 x 1, 2 on Sprue
* Add 3 Part 4073c01 Trans-Clear Plate, Round 1 x 1, 2 on Sprue
|
|
Reza -
Assuming that you know where the images are located on the web, could you please
add hyperlinks to where you find the images in your requests?
The hyperlinks may not always be valid, but at least I can look them over for
now.
Thanks,
Randy
|
Randy,
I have saved many photos of used, MISB, or sealed copies for various train sets
from 80s and even before 80s. I got them either from their owners or from past
auctions. So I cannot always find any link as those links are mostly broken by
now. My friend Morris (lego.12vtrains) has saved many photos since 2014-15 and
shared them with me.
For this set, I have photos of many copies. I have also bought an MISB one and
it is currently in the custom office.
One photo is taken from the store Bluxe. You can find easily his photos on facebook.
Search Bluxe. (can I add a link to facebook here?)
Nkiss82 sent me photos of his MISB copy. I used them already for this request:
https://www.bricklink.com/messageThread.asp?ID=244678
Thanks,
Reza
|
|
| Author: | SezaR | | Posted: | Dec 4, 2018 23:18 | | Subject: | Re: Inventory Change Request for Set 6686-1 | | Viewed: | 14 times | | Topic: | Inventories Requests | |
| In Inventories Requests, elias3 writes:
| | Please make changes to the following inventory:
* Add 1 Part 6686stk01 (Not Applicable) Sticker for Set 6686 - (195055) (match ID 99)
* Add 1 Part 3010 White Brick 1 x 4 (match ID 99)
* Change 1 Part White 3010p06 Brick 1 x 4 with Red Danger Stripes on Un-Printed Background Pattern {Regular to Alternate} {match ID 0 to 99}
Comments from Submitter:
This stickersheet came in early releases of this set. add also the regular 1x4 bricks and the already in pattern red/white stripes pattern move to the alt. section. So make the '99' MID.
|
https://www.bricklink.com/message.asp?ID=1118337
|
|
| Author: | SezaR | | Posted: | Dec 4, 2018 23:16 | | Subject: | Re: Inventory Change Request for Set 6686-1 | | Viewed: | 20 times | | Topic: | Inventories Requests | |
| In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Delete 2 Part 4073 Trans-Yellow Plate, Round 1 x 1 Straight Side
* Add 1 Part 4073c01 Trans-Yellow Plate, Round 1 x 1, 2 on Sprue
|
My copy is 66%-NIB! One bag out of three is opened (the one including (4073c01
trans-yellow) and two white printed tiles
[p=3068bp06]
and
[p=3068bp50]
and also two white rounded bricks
[p=3062b]
were removed. All the other parts are present.
My copy was the source of this inventory change request:
https://www.bricklink.com/messageThread.asp?ID=244606
The white brick
without pattern can be seen in one sealed bag.
|
|
|
| Author: | randyf | | Posted: | Dec 4, 2018 23:12 | | Subject: | Re: Inventory Change Request for Set 7735-1 | | Viewed: | 13 times | | Topic: | Inventories Requests | |
| In Inventories Requests, SezaR writes:
| | In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Delete 6 Part 4073 Trans-Clear Plate, Round 1 x 1 Straight Side
* Delete 6 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side
* Add 3 Part 4073c01 Trans-Red Plate, Round 1 x 1, 2 on Sprue
* Add 3 Part 4073c01 Trans-Clear Plate, Round 1 x 1, 2 on Sprue
|
|
Reza -
Assuming that you know where the images are located on the web, could you please
add hyperlinks to where you find the images in your requests?
The hyperlinks may not always be valid, but at least I can look them over for
now.
Thanks,
Randy
|
|
| Author: | SezaR | | Posted: | Dec 4, 2018 23:10 | | Subject: | Inventory Change Request for Set 6686-1 | | Viewed: | 23 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Delete 2 Part 4073 Trans-Yellow Plate, Round 1 x 1 Straight Side
* Add 1 Part 4073c01 Trans-Yellow Plate, Round 1 x 1, 2 on Sprue
|
| Author: | SezaR | | Posted: | Dec 4, 2018 22:53 | | Subject: | Re: Inventory Change Request for Set 7735-1 | | Viewed: | 16 times | | Topic: | Inventories Requests | |
| In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Delete 6 Part 4073 Trans-Clear Plate, Round 1 x 1 Straight Side
* Delete 6 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side
* Add 3 Part 4073c01 Trans-Red Plate, Round 1 x 1, 2 on Sprue
* Add 3 Part 4073c01 Trans-Clear Plate, Round 1 x 1, 2 on Sprue
|
|
|
|
| Author: | SezaR | | Posted: | Dec 4, 2018 22:51 | | Subject: | Inventory Change Request for Set 7735-1 | | Viewed: | 16 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Delete 6 Part 4073 Trans-Clear Plate, Round 1 x 1 Straight Side
* Delete 6 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side
* Add 3 Part 4073c01 Trans-Red Plate, Round 1 x 1, 2 on Sprue
* Add 3 Part 4073c01 Trans-Clear Plate, Round 1 x 1, 2 on Sprue
|
|
| Author: | brox999 | | Posted: | Dec 4, 2018 22:31 | | Subject: | Re: 60592c01 - whos idea was this? | | Viewed: | 56 times | | Topic: | Catalog | |
| In Catalog, SylvainLS writes:
| | In Catalog, brox999 writes:
| | […]
[3930c01] is in many new sets
|
Not.
The hinge brick and the hinge plate always came separated.
| | and I need
the ability to add this part to my store inventory in a new state […]
|
This assembly can’t be New: you have assembled the parts yourself, that’s the
definition of Used.
|
Rubbish, putting two brand new, unused parts together does not make them used.
I list the assembly as new if the parts came from a sealed set
|
| Author: | StormChaser | | Posted: | Dec 4, 2018 21:21 | | Subject: | Re: Bored? I Need Help | | Viewed: | 58 times | | Topic: | Catalog | |
| In General, StormChaser writes:
| | I am absolutely going to need help with these definitions
|
I'll do:
2nd Section: F, G, H, I, J
This only leaves the 4th and 5th sections which still need to be worked on.
|
|
| Author: | randyf | | Posted: | Dec 4, 2018 18:12 | | Subject: | Re: 40292 minifig error | | Viewed: | 28 times | | Topic: | Catalog | |
| In Catalog, StormChaser writes:
| | In Catalog, randyf writes:
I need to make it clear that these are not official guidelines. I have been
working on a project to rework the catalog Help Center and the page linked to
above is a proposed page which is not yet complete or official.
The current catalog guidelines still in effect are only those on the left
side of this page:
https://www.bricklink.com/help.asp?topicID=21
The sections on the right side of the page are proposals and are works in progress.
|
My bad, Robert. I forgot that those sections were the "work in progress" ones.
The section that I was referencing about minifigures being added to the catalog
in your new version contains the same basic information as the old version but
worded in a much friendlier way. Therefore, everything that I posted is not
affected by which version someone references.
The page I should have referred to was https://www.bricklink.com/help.asp?helpID=71
Cheers,
Randy
|
|
| Author: | axaday | | Posted: | Dec 4, 2018 18:04 | | Subject: | Re: 40292 minifig error | | Viewed: | 25 times | | Topic: | Catalog | |
| In Catalog, Teup writes:
| | Well, I actually agree with yorbrick the "boy" should be added to the catalog.
I understand the Bricklink catalog follows the instructions and that is a good
and smart choice, but how far will we go? When I saw the set my first thought
was like "only a girl? oh wait a sec, there's the boy hair" and the box literally
has the boy on the side of the box. To me the hair seems off on the dad and he's
not shown that way either. Nor is it logical that a minifig has an extra piece
to make a marginally different minifig with no different meaning. The torso of
the child is clearly unisex (if not boyish) so in my opinion everything points
to the hairpiece being intended for the child.
If so, it begs the question if we really want to stick 100% to the instructions
in every case. I think at least adding minfigs that are shown on the box as alternates
is not such a stretch.
|
I think you are not asking for what we ultimately want, perhaps because you are
aware that it is as far as we can get without the programmers getting involved.
What we ultimately want is to be able to put alternates into minifig inventories.
There are quite a LOT of minifigs the last few years that come with a hair and
a hat, usually pictured somewhere with each. I think it would clutter things
up a lot. Look at [s-60134-1] and . They have a certain way they
are designed to go, but the instructions show some pictures of them all mixed
and matched, legs, torsos, heads and hair. They each have 15 minifigs. How
many variants does that inventory need to have in it?
|
|
| Author: | StormChaser | | Posted: | Dec 4, 2018 17:38 | | Subject: | Re: 40292 minifig error | | Viewed: | 41 times | | Topic: | Catalog | |
| In Catalog, randyf writes:
I need to make it clear that these are not official guidelines. I have been
working on a project to rework the catalog Help Center and the page linked to
above is a proposed page which is not yet complete or official.
The current catalog guidelines still in effect are only those on the left
side of this page:
https://www.bricklink.com/help.asp?topicID=21
The sections on the right side of the page are proposals and are works in progress.
|
|
| Author: | Hygrotus | | Posted: | Dec 4, 2018 16:04 | | Subject: | Re: 42082 extra items | | Viewed: | 40 times | | Topic: | Inventories | |
| In Inventories, xxxzanka writes:
| | In Inventories, xxxzanka writes:
| | It seems to me one trans clear 1x1 plate is missing as extra parts (I have 3
in step 8 bags, 2 used in step 8).
Giancarlo
|
Tile not plate, sorry
|
Yes you have right it is visible in this review
https://youtu.be/FTrlyFYOoes?t=21m13s
Please consider submiting invetory change request here
https://www.bricklink.com/catalogInvChange.asp?itemType=S
BTW Are you able to check rest of the inventory. Parts count on box is 4057.
Currently in this inventory we have 4056 parts. Is there missing something more?
|
| Author: | xxxzanka | | Posted: | Dec 4, 2018 15:56 | | Subject: | Re: 42082 extra items | | Viewed: | 28 times | | Topic: | Inventories | |
| In Inventories, xxxzanka writes:
| | It seems to me one trans clear 1x1 plate is missing as extra parts (I have 3
in step 8 bags, 2 used in step 8).
Giancarlo
|
Tile not plate, sorry
|
| Author: | xxxzanka | | Posted: | Dec 4, 2018 15:53 | | Subject: | 42082 extra items | | Viewed: | 76 times | | Topic: | Inventories | | Status: | Open | |
| It seems to me one trans clear 1x1 plate is missing as extra parts (I have 3
in step 8 bags, 2 used in step 8).
Giancarlo
|
| Author: | randyf | | Posted: | Dec 4, 2018 13:28 | | Subject: | Re: 40292 minifig error | | Viewed: | 32 times | | Topic: | Catalog | |
| In Catalog, axaday writes:
| | In Catalog, Teup writes:
| | Nor is it logical that a minifig has an extra piece
to make a marginally different minifig with no different meaning.
|
|
And that is what we refer to as the "slippery slope".
Randy
|
|
| Author: | randyf | | Posted: | Dec 4, 2018 13:24 | | Subject: | Re: 40292 minifig error | | Viewed: | 27 times | | Topic: | Catalog | |
| In Catalog, Teup writes:
| | Well, I actually agree with yorbrick the "boy" should be added to the catalog.
|
Your opinion has been noted and future admin teams may decide to go in that direction.
However, the current admin team on both the catalog and inventory sides had discussions
and agreed on how to proceed in this situation. I do not see that changing for
the foreseeable future.
| | I understand the Bricklink catalog follows the instructions and that is a good
and smart choice, but how far will we go?
|
There are a few other situations like this that I know of from my personal collection.
In all of those cases, the current guidelines that are in place were followed
in the catalog and subsequently the inventories. So, for now, it makes sense
to keep things consistent with the guidelines to keep the catalog consistent.
| | To me the hair seems off on the dad and he's not shown that way either.
|
First of all, you are assuming that it is a dad, but I do to. What is not an
assumption is that he *is* shown that way in one version of the instructions:
https://www.bricklink.com/message.asp?ID=1117220
| | Nor is it logical that a minifig has an extra piece to make a marginally different
minifig with no different meaning.
|
Since when was LEGO logical? They already had *two* attempts at this, and
according to you, they screwed up on both of them. Who are we to say that it
is not the way they intended it? Third time's a charm? 
| | The torso of the child is clearly unisex (if not boyish)
|
If the torso is *clearly* unisex, then how could it be "boyish"?
| | so in my opinion everything points to the hairpiece being intended for the child.
If so, it begs the question if we really want to stick 100% to the instructions
in every case.
|
As I stated above, at least for the foreseeable future, the answer is "yes".
If Robert, Ronald and Maggie want to add this topic to the Catalog Roadmap, then
I don't see why it could not be considered. I would not expect it to have
any sort of large priority, though.
Thanks for your comments,
Randy
|
|
| Author: | axaday | | Posted: | Dec 4, 2018 13:16 | | Subject: | Re: 40292 minifig error | | Viewed: | 29 times | | Topic: | Catalog | |
| In Catalog, Teup writes:
| | Nor is it logical that a minifig has an extra piece
to make a marginally different minifig with no different meaning.
|
|
|
| Author: | Teup | | Posted: | Dec 4, 2018 12:33 | | Subject: | Re: 40292 minifig error | | Viewed: | 39 times | | Topic: | Catalog | |
| In Catalog, randyf writes:
| | In Catalog, yorbrick writes:
| | Although they cannot sell it as a boy as depicted on the box, unless listed as
a custom minifig. No doubt in time people will wonder which minifigure they have
and not be able to match up the boy version with a minifigure in the catalogue.
|
Many questions come up in the forum to identify minifigures that have the wrong
hands, the wrong arms, the wrong legs, the wrong head, the wrong hair, etc. Such
is the nature of LEGO parts; they get played with and mixed up all the time.
Sellers are free to sell those minifigures as "customs", but it behooves them
to find a closely related minifigure in the catalog to sell under and either
sell it as incomplete or fix the minifigure they have to match the one in the
catalog. I don't see this scenario as being any different to that.
However, when it comes to adding minifigures to the catalog, the guidelines are
clear and were followed: https://www.bricklink.com/help.asp?helpID=2477
If they weren't followed, we would have the inevitable question, "Why was
this boy minifigure added to the catalog when it clearly isn't shown in the
instructions?"
Cheers,
Randy
|
Well, I actually agree with yorbrick the "boy" should be added to the catalog.
I understand the Bricklink catalog follows the instructions and that is a good
and smart choice, but how far will we go? When I saw the set my first thought
was like "only a girl? oh wait a sec, there's the boy hair" and the box literally
has the boy on the side of the box. To me the hair seems off on the dad and he's
not shown that way either. Nor is it logical that a minifig has an extra piece
to make a marginally different minifig with no different meaning. The torso of
the child is clearly unisex (if not boyish) so in my opinion everything points
to the hairpiece being intended for the child.
If so, it begs the question if we really want to stick 100% to the instructions
in every case. I think at least adding minfigs that are shown on the box as alternates
is not such a stretch.
|
|
| Author: | normann1974 | | Posted: | Dec 4, 2018 12:33 | | Subject: | Inventory Change Request for Set 10259-1 | | Viewed: | 19 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part Light Bluish Gray {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove}
* Change 2 Part Dark Bluish Gray {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (undetermined type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}
Comments from Submitter:
Source: Sealed set just opened. LBG with groove, DBG without.
|
|
| Author: | normann1974 | | Posted: | Dec 4, 2018 12:27 | | Subject: | Inventory Change Request for Set 10259-1 | | Viewed: | 15 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part bb219 Dark Bluish Gray Train, Track Plastic (RC Trains) Connection/Stacking Pin for Track Storage (Extra)
Comments from Submitter:
I wonder why this is missing from the current inventory. Anyway, it was (as expected) in the stack o'tracks in the set I just opened and built. This inventory is also missing all stickered parts. I'll probably do them when I disassemble my set after Christmas.
|
|
| Author: | randyf | | Posted: | Dec 4, 2018 12:27 | | Subject: | Re: 40292 minifig error | | Viewed: | 29 times | | Topic: | Catalog | |
| In Catalog, yorbrick writes:
| | Although they cannot sell it as a boy as depicted on the box, unless listed as
a custom minifig. No doubt in time people will wonder which minifigure they have
and not be able to match up the boy version with a minifigure in the catalogue.
|
Many questions come up in the forum to identify minifigures that have the wrong
hands, the wrong arms, the wrong legs, the wrong head, the wrong hair, etc. Such
is the nature of LEGO parts; they get played with and mixed up all the time.
Sellers are free to sell those minifigures as "customs", but it behooves them
to find a closely related minifigure in the catalog to sell under and either
sell it as incomplete or fix the minifigure they have to match the one in the
catalog. I don't see this scenario as being any different to that.
However, when it comes to adding minifigures to the catalog, the guidelines are
clear and were followed: https://www.bricklink.com/help.asp?helpID=2477
If they weren't followed, we would have the inevitable question, "Why was
this boy minifigure added to the catalog when it clearly isn't shown in the
instructions?"
Cheers,
Randy
|
|
| Author: | elias3 | | Posted: | Dec 4, 2018 10:52 | | Subject: | Re: Inventory Change Request for Set 7745-1 | | Viewed: | 18 times | | Topic: | Inventories Requests | |
| In Inventories Requests, elias3 writes:
| | Please make changes to the following inventory:
* Delete 4 Part 4073 Trans-Clear Plate, Round 1 x 1 Straight Side
* Delete 4 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side
* Add 2 Part 4073c01 Trans-Red Plate, Round 1 x 1, 2 on Sprue
* Add 2 Part 4073c01 Trans-Clear Plate, Round 1 x 1, 2 on Sprue
|
See also post from Reza: https://www.bricklink.com/message.asp?ID=1086785
|
|
|
| Author: | elias3 | | Posted: | Dec 4, 2018 10:43 | | Subject: | Inventory Change Request for Set 7745-1 | | Viewed: | 30 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Delete 4 Part 4073 Trans-Clear Plate, Round 1 x 1 Straight Side
* Delete 4 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side
* Add 2 Part 4073c01 Trans-Red Plate, Round 1 x 1, 2 on Sprue
* Add 2 Part 4073c01 Trans-Clear Plate, Round 1 x 1, 2 on Sprue
|
|
| Author: | yorbrick | | Posted: | Dec 4, 2018 08:50 | | Subject: | Re: 40292 minifig error | | Viewed: | 38 times | | Topic: | Catalog | |
| | | And anyone can change the interpretation (and minifigs) to better represent their
own situation.
|
Although they cannot sell it as a boy as depicted on the box, unless listed as
a custom minifig. No doubt in time people will wonder which minifigure they have
and not be able to match up the boy version with a minifigure in the catalogue.
|
|
| Author: | Teup | | Posted: | Dec 4, 2018 08:21 | | Subject: | Re: 40292 minifig error | | Viewed: | 27 times | | Topic: | Catalog | |
| In Catalog, SylvainLS writes:
| | In Catalog, Teup writes:
| | […]
 Haha that's crazy, seems the person making the instructions made the mistake.
I guess Bricklink follows the instructions and not the box, so probably it should
stay like this then... Although unless dad has a job as a hairdresser or fashion
designer I do think he looks a bit off with that kids/teenage haircut
|
Well, we’re assuming it’s a “dad”. It could be a “big brother” or a “young uncle”
too
And anyone can change the interpretation (and minifigs) to better represent their
own situation.
|
I guess if dad really is a hairdresser or fashion designer, the girl's hair
could be even better
|
|
| Author: | SylvainLS | | Posted: | Dec 4, 2018 07:23 | | Subject: | Re: 40292 minifig error | | Viewed: | 41 times | | Topic: | Catalog | |
| In Catalog, Teup writes:
| | […]
Haha that's crazy, seems the person making the instructions made the mistake.
I guess Bricklink follows the instructions and not the box, so probably it should
stay like this then... Although unless dad has a job as a hairdresser or fashion
designer I do think he looks a bit off with that kids/teenage haircut
|
Well, we’re assuming it’s a “dad”. It could be a “big brother” or a “young uncle”
too
And anyone can change the interpretation (and minifigs) to better represent their
own situation.
|
|
| Author: | Teup | | Posted: | Dec 4, 2018 07:10 | | Subject: | Re: 40292 minifig error | | Viewed: | 43 times | | Topic: | Catalog | |
| In Catalog, SylvainLS writes:
| | In Catalog, Teup writes:
| |
LOL, so the Christmas giftset 40292 has a male and a female hairpiece so that
the child can be a boy or a girl (and they're both on the box). But someone
uploaded a picture where the alternate hair is put on the DAD's head, kind
of making it a dad's hairdo optionality feature
https://www.bricklink.com/catalogItemInv.asp?S=40292-1
|
Actually, it IS a “dad’s hairdo optionality feature”: there are two versions
of the instructions and each one uses different hair for the dad.
See https://www.bricklink.com/message.asp?ID=1117220
|
Haha that's crazy, seems the person making the instructions made the mistake.
I guess Bricklink follows the instructions and not the box, so probably it should
stay like this then... Although unless dad has a job as a hairdresser or fashion
designer I do think he looks a bit off with that kids/teenage haircut
|
|
| Author: | SylvainLS | | Posted: | Dec 4, 2018 06:56 | | Subject: | Re: 40292 minifig error | | Viewed: | 39 times | | Topic: | Catalog | |
| In Catalog, Teup writes:
| |
LOL, so the Christmas giftset 40292 has a male and a female hairpiece so that
the child can be a boy or a girl (and they're both on the box). But someone
uploaded a picture where the alternate hair is put on the DAD's head, kind
of making it a dad's hairdo optionality feature
https://www.bricklink.com/catalogItemInv.asp?S=40292-1
|
Actually, it IS a “dad’s hairdo optionality feature”: there are two versions
of the instructions and each one uses different hair for the dad.
See https://www.bricklink.com/message.asp?ID=1117220
|
|
| Author: | Teup | | Posted: | Dec 4, 2018 06:32 | | Subject: | 40292 minifig error | | Viewed: | 130 times | | Topic: | Catalog | | Status: | Open | |
|
LOL, so the Christmas giftset 40292 has a male and a female hairpiece so that
the child can be a boy or a girl (and they're both on the box). But someone
uploaded a picture where the alternate hair is put on the DAD's head, kind
of making it a dad's hairdo optionality feature
https://www.bricklink.com/catalogItemInv.asp?S=40292-1
|
|
| Author: | SezaR | | Posted: | Dec 4, 2018 03:46 | | Subject: | Re: Inventory Change Request for Set 7839-1 | | Viewed: | 17 times | | Topic: | Inventories Requests | |
| In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Delete 4 Part 3641 Black Tire 15mm D. x 6mm Offset Tread Small
* Delete 4 Part 4624 Light Gray Wheel 8mm D. x 6mm
* Delete 2 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side
* Delete 2 Part 4073 Trans-Yellow Plate, Round 1 x 1 Straight Side
* Add 1 Part 4073c01 Trans-Red Plate, Round 1 x 1, 2 on Sprue
* Add 1 Part 4073c01 Trans-Yellow Plate, Round 1 x 1, 2 on Sprue
* Change 4 Part Light Gray 4624c02 Wheel 8mm D. x 6mm with Black Tire 15mm D. x 6mm Offset Tread Small (4624 / 3641) {Counterpart to Regular}
|
Photos 1 and 2 from here:
http://www.brickshelf.com/cgi-bin/gallery.cgi?f=300763
Photos 3 and 4 from some old item on facebook.
|
|
|
| Author: | SezaR | | Posted: | Dec 4, 2018 03:42 | | Subject: | Inventory Change Request for Set 7839-1 | | Viewed: | 14 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Delete 4 Part 3641 Black Tire 15mm D. x 6mm Offset Tread Small
* Delete 4 Part 4624 Light Gray Wheel 8mm D. x 6mm
* Delete 2 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side
* Delete 2 Part 4073 Trans-Yellow Plate, Round 1 x 1 Straight Side
* Add 1 Part 4073c01 Trans-Red Plate, Round 1 x 1, 2 on Sprue
* Add 1 Part 4073c01 Trans-Yellow Plate, Round 1 x 1, 2 on Sprue
* Change 4 Part Light Gray 4624c02 Wheel 8mm D. x 6mm with Black Tire 15mm D. x 6mm Offset Tread Small (4624 / 3641) {Counterpart to Regular}
|
|
| Author: | SezaR | | Posted: | Dec 4, 2018 03:34 | | Subject: | Inventory Change Request for Set 7823-1 | | Viewed: | 20 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Delete 2 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side
* Add 1 Part 4073c01 Trans-Red Plate, Round 1 x 1, 2 on Sprue
* Add 1 Part 3070b Red Tile 1 x 1 with Groove (Extra)
|
| Author: | SezaR | | Posted: | Dec 4, 2018 02:53 | | Subject: | Re: Inventory Change Request for Set 6391-1 | | Viewed: | 16 times | | Topic: | Inventories Requests | |
| In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Delete 2 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side
* Delete 2 Part 4073 Trans-Yellow Plate, Round 1 x 1 Straight Side
* Add 1 Part 4073c01 Trans-Red Plate, Round 1 x 1, 2 on Sprue
* Add 1 Part 4073c01 Trans-Yellow Plate, Round 1 x 1, 2 on Sprue
|
|
|
|
| Author: | SezaR | | Posted: | Dec 4, 2018 02:51 | | Subject: | Inventory Change Request for Set 6391-1 | | Viewed: | 18 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Delete 2 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side
* Delete 2 Part 4073 Trans-Yellow Plate, Round 1 x 1 Straight Side
* Add 1 Part 4073c01 Trans-Red Plate, Round 1 x 1, 2 on Sprue
* Add 1 Part 4073c01 Trans-Yellow Plate, Round 1 x 1, 2 on Sprue
|
|
| Author: | FreeStorm | | Posted: | Dec 4, 2018 02:35 | | Subject: | Re: Inventory Change Request for Set 6392-1 | | Viewed: | 20 times | | Topic: | Inventories Requests | |
| In Inventories Requests, FreeStorm writes:
| | Please make changes to the following inventory:
* Delete 39 Part 4073 White Plate, Round 1 x 1 Straight Side
* Add 20 Part 4073c01 White Plate, Round 1 x 1, 2 on Sprue
* Delete 22 Part 4073 Trans-Clear Plate, Round 1 x 1 Straight Side
* Add 11 Part 4073c01 Trans-Clear Plate, Round 1 x 1, 2 on Sprue
* Delete 11 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side
* Delete 1 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side (Extra)
* Add 6 Part 4073c01 Trans-Red Plate, Round 1 x 1, 2 on Sprue
Comments from Submitter:
Source: sealed box
I modified only parts I can see inside the blister.
I think other color come on Sprue, but I didn't see them.
How do you deal with odd count of regular parts?
39 = 19 X 2 + 1 and 1 extra?
|
On pictures, you can't see clearly trans-red parts.
But I've seen the Sprue by eyes
|
|
|
| Author: | FreeStorm | | Posted: | Dec 4, 2018 02:26 | | Subject: | Inventory Change Request for Set 6392-1 | | Viewed: | 20 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Delete 39 Part 4073 White Plate, Round 1 x 1 Straight Side
* Add 20 Part 4073c01 White Plate, Round 1 x 1, 2 on Sprue
* Delete 22 Part 4073 Trans-Clear Plate, Round 1 x 1 Straight Side
* Add 11 Part 4073c01 Trans-Clear Plate, Round 1 x 1, 2 on Sprue
* Delete 11 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side
* Delete 1 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side (Extra)
* Add 6 Part 4073c01 Trans-Red Plate, Round 1 x 1, 2 on Sprue
Comments from Submitter:
Source: sealed box
I modified only parts I can see inside the blister.
I think other color come on Sprue, but I didn't see them.
How do you deal with odd count of regular parts?
39 = 19 X 2 + 1 and 1 extra?
|
|
| Author: | SezaR | | Posted: | Dec 4, 2018 02:13 | | Subject: | Re: Inventory Change Request for Set 1484-1 | | Viewed: | 12 times | | Topic: | Inventories Requests | |
| In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Delete 2 Part 4073 Black Plate, Round 1 x 1 Straight Side
* Delete 2 Part 4073 Trans-Yellow Plate, Round 1 x 1 Straight Side
* Delete 4 Part 3641 Black Tire 15mm D. x 6mm Offset Tread Small
* Delete 4 Part 4624 White Wheel 8mm D. x 6mm
* Add 1 Part 4073c01 Black Plate, Round 1 x 1, 2 on Sprue
* Add 1 Part 4073c01 Trans-Yellow Plate, Round 1 x 1, 2 on Sprue
* Change 4 Part White 4624c02 Wheel 8mm D. x 6mm with Black Tire 15mm D. x 6mm Offset Tread Small (4624 / 3641) {Counterpart to Regular}
|
|
|
|
| Author: | SezaR | | Posted: | Dec 4, 2018 02:11 | | Subject: | Inventory Change Request for Set 1484-1 | | Viewed: | 18 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Delete 2 Part 4073 Black Plate, Round 1 x 1 Straight Side
* Delete 2 Part 4073 Trans-Yellow Plate, Round 1 x 1 Straight Side
* Delete 4 Part 3641 Black Tire 15mm D. x 6mm Offset Tread Small
* Delete 4 Part 4624 White Wheel 8mm D. x 6mm
* Add 1 Part 4073c01 Black Plate, Round 1 x 1, 2 on Sprue
* Add 1 Part 4073c01 Trans-Yellow Plate, Round 1 x 1, 2 on Sprue
* Change 4 Part White 4624c02 Wheel 8mm D. x 6mm with Black Tire 15mm D. x 6mm Offset Tread Small (4624 / 3641) {Counterpart to Regular}
|
|
| Author: | randyf | | Posted: | Dec 3, 2018 21:17 | | Subject: | Re: Inventory Change Request for Set 2147-1 | | Viewed: | 17 times | | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| | Please make changes to the following inventory:
* Delete 4 Part 4624 Light Gray Wheel 8mm D. x 6mm
* Delete 4 Part 3641 Black Tire 15mm D. x 6mm Offset Tread Small
* Delete 6 Part 4624 White Wheel 8mm D. x 6mm
* Delete 6 Part 3139 Black Tire 14mm D. x 4mm Smooth Small Single
* Change 4 Part Light Gray 4624c02 Wheel 8mm D. x 6mm with Black Tire 15mm D. x 6mm Offset Tread Small (4624 / 3641) {Counterpart to Regular}
* Change 6 Part White 4624c01 Wheel 8mm D. x 6mm with Black Tire 14mm D. x 4mm Smooth Small Single (4624 / 3139) {Counterpart to Regular}
Comments from Submitter:
Images to follow.
|
Set unboxing can be found here: http://www.brickshelf.com/cgi-bin/gallery.cgi?f=268636
|
|
|
| Author: | randyf | | Posted: | Dec 3, 2018 21:16 | | Subject: | Inventory Change Request for Set 2147-1 | | Viewed: | 19 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Delete 4 Part 4624 Light Gray Wheel 8mm D. x 6mm
* Delete 4 Part 3641 Black Tire 15mm D. x 6mm Offset Tread Small
* Delete 6 Part 4624 White Wheel 8mm D. x 6mm
* Delete 6 Part 3139 Black Tire 14mm D. x 4mm Smooth Small Single
* Change 4 Part Light Gray 4624c02 Wheel 8mm D. x 6mm with Black Tire 15mm D. x 6mm Offset Tread Small (4624 / 3641) {Counterpart to Regular}
* Change 6 Part White 4624c01 Wheel 8mm D. x 6mm with Black Tire 14mm D. x 4mm Smooth Small Single (4624 / 3139) {Counterpart to Regular}
Comments from Submitter:
Images to follow.
|
|
| Author: | randyf | | Posted: | Dec 3, 2018 20:54 | | Subject: | Re: Inventory Change Request for Set 6529-1 | | Viewed: | 13 times | | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| | Please make changes to the following inventory:
* Add 1 Part 2412a Light Gray Tile, Modified 1 x 2 Grille without Bottom Groove / Lip (match ID 2)
* Change 1 Part Light Gray 2412b Tile, Modified 1 x 2 Grille with Bottom Groove / Lip {Regular to Alternate} {match ID 0 to 2}
Comments from Submitter:
Image to follow.
|
Set unboxing and building can be found here: http://www.brickshelf.com/cgi-bin/gallery.cgi?f=270043
|
|
|
| Author: | randyf | | Posted: | Dec 3, 2018 20:49 | | Subject: | Inventory Change Request for Set 6529-1 | | Viewed: | 18 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 2412a Light Gray Tile, Modified 1 x 2 Grille without Bottom Groove / Lip (match ID 2)
* Change 1 Part Light Gray 2412b Tile, Modified 1 x 2 Grille with Bottom Groove / Lip {Regular to Alternate} {match ID 0 to 2}
Comments from Submitter:
Image to follow.
|
| Author: | randyf | | Posted: | Dec 3, 2018 20:31 | | Subject: | Re: Inventory Change Request for Set 42083-1 | | Viewed: | 21 times | | Topic: | Inventories Requests | |
| In Inventories Requests, brickmountain2 writes:
| | Comments from Submitter:
Just parted out this set.
Short (16L) = 2
Long (19L) = 1
You have them swapped but are still awesome.
|
You have them swapped in your comment but are still awesome for finding the error.
Cheers,
Randy
|
|
| Author: | randyf | | Posted: | Dec 3, 2018 19:52 | | Subject: | Re: Brown vs reddish brown cape | | Viewed: | 31 times | | Topic: | Colors | |
| In Colors, normann1974 writes:
| | Hello
I recently bought set in used condition. The bricks look like new,
and except for a few missing pieces, the set seems to contain what it should.
Well except maybe the two capes.
The BL inventory says that the capes should be reddish brown but they look more
like (old) brown to me, they lack a "reddish" tint. I that how they should look?
I don't have any any other brown or reddish brown capes or other cloth that
I can compare against. I'm asking because I don't believe this set was
ever mixed with other bricks, and it was delivered mostly assembled to me, so
I suspect that this set was only ever built once and never disassembled before
I did it today.
I don't know if my camera is able to capture the color tones exactly, but
I've tried.
/Jan
|
Looks like Reddish Brown to me.
Cheers,
Randy
|
|
| Author: | mandr | | Posted: | Dec 3, 2018 19:31 | | Subject: | Re: Brown vs reddish brown cape | | Viewed: | 30 times | | Topic: | Colors | |
| In Colors, mandr writes:
| | Maybe my monitor, but your cape looks reddish brown to me. I have two pictures
of mine, the first with a Brown cape (set 7163), and the second with a Reddish
Brown cape (7255)
|
Woops my pictures were in the wrong order somehow. But the guy with the flesh
head has a reddish brown cape from set 7255. The guy with the yellow head has
a brown cape from set 7163. Sorry for the confusion.
|
| Author: | brickmountain2 | | Posted: | Dec 3, 2018 19:26 | | Subject: | Inventory Change Request for Set 42083-1 | | Viewed: | 21 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Change {2 to 1} Part Dark Azure 32202 Hose, Soft Axle 16L
* Change {1 to 2} Part Dark Azure 32235 Hose, Soft Axle 19L
Comments from Submitter:
Just parted out this set.
Short (16L) = 2
Long (19L) = 1
You have them swapped but are still awesome.
|
|
| Author: | Brickitty | | Posted: | Dec 3, 2018 19:20 | | Subject: | Re: Brown vs reddish brown cape | | Viewed: | 25 times | | Topic: | Colors | |
| In Colors, normann1974 writes:
| | Hello
I recently bought set in used condition. The bricks look like new,
and except for a few missing pieces, the set seems to contain what it should.
Well except maybe the two capes.
The BL inventory says that the capes should be reddish brown but they look more
like (old) brown to me, they lack a "reddish" tint. I that how they should look?
I don't have any any other brown or reddish brown capes or other cloth that
I can compare against. I'm asking because I don't believe this set was
ever mixed with other bricks, and it was delivered mostly assembled to me, so
I suspect that this set was only ever built once and never disassembled before
I did it today.
I don't know if my camera is able to capture the color tones exactly, but
I've tried.
/Jan
|
That's reddish brown. Cloth colors often differ from the plastic colors.
|
|
| Author: | TravelBound | | Posted: | Dec 3, 2018 18:43 | | Subject: | Re: Brown vs reddish brown cape | | Viewed: | 39 times | | Topic: | Colors | |
| In Colors, normann1974 writes:
| | Hello
I recently bought set in used condition. The bricks look like new,
and except for a few missing pieces, the set seems to contain what it should.
Well except maybe the two capes.
The BL inventory says that the capes should be reddish brown but they look more
like (old) brown to me, they lack a "reddish" tint. I that how they should look?
I don't have any any other brown or reddish brown capes or other cloth that
I can compare against. I'm asking because I don't believe this set was
ever mixed with other bricks, and it was delivered mostly assembled to me, so
I suspect that this set was only ever built once and never disassembled before
I did it today.
I don't know if my camera is able to capture the color tones exactly, but
I've tried.
/Jan
|
In my experience a true old brown cape does not have the "lined" sort of texture/color.
|
|
| Author: | mandr | | Posted: | Dec 3, 2018 17:37 | | Subject: | Re: Brown vs reddish brown cape | | Viewed: | 45 times | | Topic: | Colors | |
| Maybe my monitor, but your cape looks reddish brown to me. I have two pictures
of mine, the first with a Brown cape (set 7163), and the second with a Reddish
Brown cape (7255)
|
|
|
| Author: | normann1974 | | Posted: | Dec 3, 2018 17:15 | | Subject: | Brown vs reddish brown cape | | Viewed: | 110 times | | Topic: | Colors | | Status: | Open | |
| Hello
I recently bought set in used condition. The bricks look like new,
and except for a few missing pieces, the set seems to contain what it should.
Well except maybe the two capes.
The BL inventory says that the capes should be reddish brown but they look more
like (old) brown to me, they lack a "reddish" tint. I that how they should look?
I don't have any any other brown or reddish brown capes or other cloth that
I can compare against. I'm asking because I don't believe this set was
ever mixed with other bricks, and it was delivered mostly assembled to me, so
I suspect that this set was only ever built once and never disassembled before
I did it today.
I don't know if my camera is able to capture the color tones exactly, but
I've tried.
/Jan
|
|
|
| Author: | Skylar2010 | | Posted: | Dec 3, 2018 15:01 | | Subject: | Re: Home page - more stages shown | | Viewed: | 28 times | | Topic: | Suggestions | |
| In Suggestions, MidwestBrick writes:
| | In Suggestions, MidwestBrick writes:
| | Currently it says
Invoices
Shipments
Drove-thru
Would like to see
Orders
Invoiced
Paid
Packed
Shipped
Orders -- these need to be invoiced
Invoiced-- seller has sent the invoice
Paid --- buyer has paid
Packed-- seller has packed the order
Shipped -- seller has shipped the order, and can complete drive thru here
to move it out of the shipped bucket
Same for buyers. Not sure why everything was condensed to three options when
there are more stages than this and with IC, items move quickly through the stages
and skip some.
Thanks for the consideration.
|
Kind of surprised there is zero support or feedback on this. It can't
be just me whom dislikes having so many orders within the same bucket (Shipments)
when they have been paid for but not packed or they are packed and ready to print
the shipping label. Personally, I don't pack an order then go print the
shipping info right afterwards. I, and I assume many others, pack all orders
or as many as they can get to, then go print all shipping labels at one time.
And then still show the orders that have been invoiced but a payment hasn't
come through yet. I think this is the most important one as a non-paid for order
can get buried quickly so it would be nice to see that you have an order you've
invoiced and check up on it without having to dig for it.
|
Yeah I can see why that idea makes sense especially for those who are dealing
with multiple orders at once. I am still too small for that to matter yet though
.But I am all for the idea of making things easier to find lol.
|
|
| Author: | MidwestBrick | | Posted: | Dec 3, 2018 14:54 | | Subject: | Re: Home page - more stages shown | | Viewed: | 28 times | | Topic: | Suggestions | |
| In Suggestions, MidwestBrick writes:
| | Currently it says
Invoices
Shipments
Drove-thru
Would like to see
Orders
Invoiced
Paid
Packed
Shipped
Orders -- these need to be invoiced
Invoiced-- seller has sent the invoice
Paid --- buyer has paid
Packed-- seller has packed the order
Shipped -- seller has shipped the order, and can complete drive thru here
to move it out of the shipped bucket
Same for buyers. Not sure why everything was condensed to three options when
there are more stages than this and with IC, items move quickly through the stages
and skip some.
Thanks for the consideration.
|
Kind of surprised there is zero support or feedback on this. It can't
be just me whom dislikes having so many orders within the same bucket (Shipments)
when they have been paid for but not packed or they are packed and ready to print
the shipping label. Personally, I don't pack an order then go print the
shipping info right afterwards. I, and I assume many others, pack all orders
or as many as they can get to, then go print all shipping labels at one time.
And then still show the orders that have been invoiced but a payment hasn't
come through yet. I think this is the most important one as a non-paid for order
can get buried quickly so it would be nice to see that you have an order you've
invoiced and check up on it without having to dig for it.
|
|
| Author: | randyf | | Posted: | Dec 3, 2018 14:26 | | Subject: | Re: Inventory Change Request for Set 6389-1 | | Viewed: | 23 times | | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| | Please make changes to the following inventory:
* Delete 6 Part 4084 Black Tire 21mm D. x 9mm Offset Tread Medium
* Delete 6 Part 4624 White Wheel 8mm D. x 6mm
* Change 6 Part White 4624c03 Wheel 8mm D. x 6mm with Black Tire 21mm D. x 9mm Offset Tread Medium (4624 / 4084) {Counterpart to Regular}
Comments from Submitter:
Image to follow.
|
|
|
|
| Author: | randyf | | Posted: | Dec 3, 2018 14:26 | | Subject: | Re: Inventory Change Request for Set 6648-1 | | Viewed: | 17 times | | Topic: | Inventories Requests | |
| In Inventories Requests, paulvdb writes:
| | In Inventories Requests, randyf writes:
| |
So according to your information and the unboxing from the link in this thread,
there seem to be two versions of the set that break down as follows:
--------------------------------------------------------------------------------
First Version included:
in White (1x)
[p=4073c01] in Trans-Yellow (2x) and Black (2x)
in White (1x)
--------------------------------------------------------------------------------
Second Version included:
* | | 2440pb005 Vehicle, Spoiler / Plow Blade 6 x 3 with Hinge with Red and Green Stripes and 'Octan' Pattern
Parts: Vehicle |
in Trans-Yellow (5x - 1 extra) and Black (5x - 1 extra)
in White (1x)
--------------------------------------------------------------------------------
All right, I think we got this figured out. I will get the inventory adjusted.
Thanks for your help everyone!
Cheers,
Randy
|
Can we be sure that all those part variants were changed at the same time? Lego
usually doesn't throw away old parts, so it's possible that there were
sets where some parts were the old variants while others were already replaced
with the new variants.
|
No, we can't be sure. That is why every part substitution in the above lists
is given its own Match ID in the inventory instead of lumping the whole group
of parts together as one alternate group with one Match ID.
The only reason I used those lists above were to keep track of all of the differences
between the MISB set unboxing on brickshelf and the MISB set that Stefaan had
opened. The word "version" might have been a poor choice of words.
Cheers,
Randy
|
|
| Author: | randyf | | Posted: | Dec 3, 2018 14:15 | | Subject: | Inventory Change Request for Set 6389-1 | | Viewed: | 21 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Delete 6 Part 4084 Black Tire 21mm D. x 9mm Offset Tread Medium
* Delete 6 Part 4624 White Wheel 8mm D. x 6mm
* Change 6 Part White 4624c03 Wheel 8mm D. x 6mm with Black Tire 21mm D. x 9mm Offset Tread Medium (4624 / 4084) {Counterpart to Regular}
Comments from Submitter:
Image to follow.
|
|
| Author: | paulvdb | | Posted: | Dec 3, 2018 14:09 | | Subject: | Re: Inventory Change Request for Set 6648-1 | | Viewed: | 20 times | | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| |
So according to your information and the unboxing from the link in this thread,
there seem to be two versions of the set that break down as follows:
--------------------------------------------------------------------------------
First Version included:
in White (1x)
[p=4073c01] in Trans-Yellow (2x) and Black (2x)
in White (1x)
--------------------------------------------------------------------------------
Second Version included:
* | | 2440pb005 Vehicle, Spoiler / Plow Blade 6 x 3 with Hinge with Red and Green Stripes and 'Octan' Pattern
Parts: Vehicle |
in Trans-Yellow (5x - 1 extra) and Black (5x - 1 extra)
in White (1x)
--------------------------------------------------------------------------------
All right, I think we got this figured out. I will get the inventory adjusted.
Thanks for your help everyone!
Cheers,
Randy
|
Can we be sure that all those part variants were changed at the same time? Lego
usually doesn't throw away old parts, so it's possible that there were
sets where some parts were the old variants while others were already replaced
with the new variants.
|
|
| Author: | mjwest83 | | Posted: | Dec 3, 2018 14:02 | | Subject: | Inventory Change Request for Set 75952-1 | | Viewed: | 19 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part erumpent01 (Not Applicable) Erumpent - Set 75952 (Counterpart)
* Add 1 Part occamy01 (Not Applicable) Occamy - Set 75952 (Counterpart)
|
|
| Author: | elias3 | | Posted: | Dec 3, 2018 13:35 | | Subject: | Re: Inventory Change Request for Set 6648-1 | | Viewed: | 22 times | | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| | In Inventories Requests, elias3 writes:
| | In Inventories Requests, elias3 writes:
| | In Inventories Requests, randyf writes:
| | In Inventories Requests, elias3 writes:
| | In Inventories Requests, randyf writes:
| | In Inventories Requests, randyf writes:
| | Please make changes to the following inventory:
* Change {4 to 2} Part Black {4073 Plate, Round 1 x 1 Straight Side to 4073c01 Plate, Round 1 x 1, 2 on Sprue}
* Change {4 to 2} Part Trans-Yellow {4073 Plate, Round 1 x 1 Straight Side to 4073c01 Plate, Round 1 x 1, 2 on Sprue}
Comments from Submitter:
Image to follow.
|
Set unboxing can be found here: http://www.brickshelf.com/cgi-bin/gallery.cgi?f=416465
|
Hi Randy
extra round 1x1 delete?
Stefaan
|
You actually added those as extras back in 2009. Are you sure I should get rid
of them? This set seems to be right at the transition time for these parts from
what I am finding, so maybe your set did not have them on sprue.
There are two versions of this set, one with the large Octan sticker (shown in
the unboxing link I posted) and one without. Maybe yours is the one without,
and the version without that sticker had no sprues. If so, I would like to set
up alternates.
Any help with this would be appreciated.
Cheers,
Randy
|
Hi
Right, my set is the without 'Octan' sticker.
Just checked my set, was build up straight from the MISB and never broken down.
Found in the box the used stickersheet (165345), the plastic bag and the catalog
109883-EU-OS (from 1993).
When I build up this set I leave also a small note with this info:
extra parts:
* 1x Trans-Light Blue Minifigure Visor (2447)
* 1x Black Plate, Round 1 x 1 (4073)
* 1x Trans-Yellow Plate, Round 1 x 1 (4073)
I can not remember this set came with the 4073 on sprue. The 4073 are like they
came on a sprue. But think they came already factory separated.
My set came with the 2412b.
Stefaan
|
forgot: then with the sprue version no extra 4073 ??
|
So according to your information and the unboxing from the link in this thread,
there seem to be two versions of the set that break down as follows:
--------------------------------------------------------------------------------
First Version included:
in White (1x)
[p=4073c01] in Trans-Yellow (2x) and Black (2x)
in White (1x)
--------------------------------------------------------------------------------
Second Version included:
* | | 2440pb005 Vehicle, Spoiler / Plow Blade 6 x 3 with Hinge with Red and Green Stripes and 'Octan' Pattern
Parts: Vehicle |
in Trans-Yellow (5x - 1 extra) and Black (5x - 1 extra)
in White (1x)
--------------------------------------------------------------------------------
All right, I think we got this figured out. I will get the inventory adjusted.
Thanks for your help everyone!
Cheers,
Randy
|
right!!
|
|
| Author: | randyf | | Posted: | Dec 3, 2018 12:31 | | Subject: | Re: Inventory Change Request for Set 6648-1 | | Viewed: | 27 times | | Topic: | Inventories Requests | |
| In Inventories Requests, elias3 writes:
| | In Inventories Requests, elias3 writes:
| | In Inventories Requests, randyf writes:
| | In Inventories Requests, elias3 writes:
| | In Inventories Requests, randyf writes:
| | In Inventories Requests, randyf writes:
| | Please make changes to the following inventory:
* Change {4 to 2} Part Black {4073 Plate, Round 1 x 1 Straight Side to 4073c01 Plate, Round 1 x 1, 2 on Sprue}
* Change {4 to 2} Part Trans-Yellow {4073 Plate, Round 1 x 1 Straight Side to 4073c01 Plate, Round 1 x 1, 2 on Sprue}
Comments from Submitter:
Image to follow.
|
Set unboxing can be found here: http://www.brickshelf.com/cgi-bin/gallery.cgi?f=416465
|
Hi Randy
extra round 1x1 delete?
Stefaan
|
You actually added those as extras back in 2009. Are you sure I should get rid
of them? This set seems to be right at the transition time for these parts from
what I am finding, so maybe your set did not have them on sprue.
There are two versions of this set, one with the large Octan sticker (shown in
the unboxing link I posted) and one without. Maybe yours is the one without,
and the version without that sticker had no sprues. If so, I would like to set
up alternates.
Any help with this would be appreciated.
Cheers,
Randy
|
Hi
Right, my set is the without 'Octan' sticker.
Just checked my set, was build up straight from the MISB and never broken down.
Found in the box the used stickersheet (165345), the plastic bag and the catalog
109883-EU-OS (from 1993).
When I build up this set I leave also a small note with this info:
extra parts:
* 1x Trans-Light Blue Minifigure Visor (2447)
* 1x Black Plate, Round 1 x 1 (4073)
* 1x Trans-Yellow Plate, Round 1 x 1 (4073)
I can not remember this set came with the 4073 on sprue. The 4073 are like they
came on a sprue. But think they came already factory separated.
My set came with the 2412b.
Stefaan
|
forgot: then with the sprue version no extra 4073 ??
|
So according to your information and the unboxing from the link in this thread,
there seem to be two versions of the set that break down as follows:
--------------------------------------------------------------------------------
First Version included:
in White (1x)
[p=4073c01] in Trans-Yellow (2x) and Black (2x)
in White (1x)
--------------------------------------------------------------------------------
Second Version included:
* | | 2440pb005 Vehicle, Spoiler / Plow Blade 6 x 3 with Hinge with Red and Green Stripes and 'Octan' Pattern
Parts: Vehicle |
in Trans-Yellow (5x - 1 extra) and Black (5x - 1 extra)
in White (1x)
--------------------------------------------------------------------------------
All right, I think we got this figured out. I will get the inventory adjusted.
Thanks for your help everyone!
Cheers,
Randy
|
|
| Author: | elias3 | | Posted: | Dec 3, 2018 11:40 | | Subject: | Re: Inventory Change Request for Set 6648-1 | | Viewed: | 23 times | | Topic: | Inventories Requests | |
| In Inventories Requests, elias3 writes:
| | In Inventories Requests, randyf writes:
| | In Inventories Requests, elias3 writes:
| | In Inventories Requests, randyf writes:
| | In Inventories Requests, randyf writes:
| | Please make changes to the following inventory:
* Change {4 to 2} Part Black {4073 Plate, Round 1 x 1 Straight Side to 4073c01 Plate, Round 1 x 1, 2 on Sprue}
* Change {4 to 2} Part Trans-Yellow {4073 Plate, Round 1 x 1 Straight Side to 4073c01 Plate, Round 1 x 1, 2 on Sprue}
Comments from Submitter:
Image to follow.
|
Set unboxing can be found here: http://www.brickshelf.com/cgi-bin/gallery.cgi?f=416465
|
Hi Randy
extra round 1x1 delete?
Stefaan
|
You actually added those as extras back in 2009. Are you sure I should get rid
of them? This set seems to be right at the transition time for these parts from
what I am finding, so maybe your set did not have them on sprue.
There are two versions of this set, one with the large Octan sticker (shown in
the unboxing link I posted) and one without. Maybe yours is the one without,
and the version without that sticker had no sprues. If so, I would like to set
up alternates.
Any help with this would be appreciated.
Cheers,
Randy
|
Hi
Right, my set is the without 'Octan' sticker.
Just checked my set, was build up straight from the MISB and never broken down.
Found in the box the used stickersheet (165345), the plastic bag and the catalog
109883-EU-OS (from 1993).
When I build up this set I leave also a small note with this info:
extra parts:
* 1x Trans-Light Blue Minifigure Visor (2447)
* 1x Black Plate, Round 1 x 1 (4073)
* 1x Trans-Yellow Plate, Round 1 x 1 (4073)
I can not remember this set came with the 4073 on sprue. The 4073 are like they
came on a sprue. But think they came already factory separated.
My set came with the 2412b.
Stefaan
|
forgot: then with the sprue version no extra 4073 ??
|
|
| Author: | elias3 | | Posted: | Dec 3, 2018 11:35 | | Subject: | Re: Inventory Change Request for Set 6648-1 | | Viewed: | 22 times | | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| | In Inventories Requests, elias3 writes:
| | In Inventories Requests, randyf writes:
| | In Inventories Requests, randyf writes:
| | Please make changes to the following inventory:
* Change {4 to 2} Part Black {4073 Plate, Round 1 x 1 Straight Side to 4073c01 Plate, Round 1 x 1, 2 on Sprue}
* Change {4 to 2} Part Trans-Yellow {4073 Plate, Round 1 x 1 Straight Side to 4073c01 Plate, Round 1 x 1, 2 on Sprue}
Comments from Submitter:
Image to follow.
|
Set unboxing can be found here: http://www.brickshelf.com/cgi-bin/gallery.cgi?f=416465
|
Hi Randy
extra round 1x1 delete?
Stefaan
|
You actually added those as extras back in 2009. Are you sure I should get rid
of them? This set seems to be right at the transition time for these parts from
what I am finding, so maybe your set did not have them on sprue.
There are two versions of this set, one with the large Octan sticker (shown in
the unboxing link I posted) and one without. Maybe yours is the one without,
and the version without that sticker had no sprues. If so, I would like to set
up alternates.
Any help with this would be appreciated.
Cheers,
Randy
|
Hi
Right, my set is the without 'Octan' sticker.
Just checked my set, was build up straight from the MISB and never broken down.
Found in the box the used stickersheet (165345), the plastic bag and the catalog
109883-EU-OS (from 1993).
When I build up this set I leave also a small note with this info:
extra parts:
* 1x Trans-Light Blue Minifigure Visor (2447)
* 1x Black Plate, Round 1 x 1 (4073)
* 1x Trans-Yellow Plate, Round 1 x 1 (4073)
I can not remember this set came with the 4073 on sprue. The 4073 are like they
came on a sprue. But think they came already factory separated.
My set came with the 2412b.
Stefaan
|
|
| Author: | reuvenk_IL | | Posted: | Dec 3, 2018 11:22 | | Subject: | Addresses in Israel - remove "district" | | Viewed: | 155 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
| Hello,
When entering my address in Israel on Bricklink, the site forces me to choose
a "district". Choices include Mehoz HaMerkaz, Mehoz Tel Aviv, etc.
These are not part of our address in Israel, but rather are used only in the
court system.
Please remove this field from addresses in Israel. I fear that it might create
confusion in the postal service and also among new buyers.
Thank you,
-Reuven
|
| Author: | mjwest83 | | Posted: | Dec 3, 2018 10:49 | | Subject: | Inventory Change Request for Set 10237-1 | | Viewed: | 26 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part spa0019 (Not Applicable) Ent / Treebeard - Set 10237 (Counterpart)
Comments from Submitter:
This is the counterpart for the assembled Treebeard.
|
| Author: | randyf | | Posted: | Dec 3, 2018 09:34 | | Subject: | Re: Sixth Catalog Project Underway | | Viewed: | 35 times | | Topic: | Catalog | |
| In Catalog, randyf writes:
| |
The note on this part is redundant and not entirely accurate.
The information in the note is contained in the name of the part. Also, the stud
type definitions are consistent throughout the catalog, so they do not need to
be inconsistently redefined here in the note.
Please consider removal of the note.
Thanks,
Randy
|
The same goes for
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
