Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | StormChaser | Posted: | Apr 11, 2018 03:57 | Subject: | Inventory Change Request for Set 970672-1 | Viewed: | 33 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 2 Part 4032b Black Plate, Round 2 x 2 with Axle Hole - X Opening
* Delete 2 Part 4032b White Plate, Round 2 x 2 with Axle Hole - X Opening
* Add 2 Part 4032 White Plate, Round 2 x 2 with Axle Hole
* Add 2 Part 4032 Black Plate, Round 2 x 2 with Axle Hole
Comments from Submitter:
Since inventory requests are saved permanently, please see the discussion here:
https://www.bricklink.com/message.asp?ID=1085733
|
|
Author: | StormChaser | Posted: | Apr 11, 2018 03:53 | Subject: | Re: Inventory Change Request for Set 970089-1 | Viewed: | 28 times | Topic: | Inventories Requests | |
| In Inventories Requests, StormChaser writes:
| Please make changes to the following inventory:
* Delete 2 Part 4032b Black Plate, Round 2 x 2 with Axle Hole - X Opening
* Delete 2 Part 4032b White Plate, Round 2 x 2 with Axle Hole - X Opening
* Add 2 Part 4032 White Plate, Round 2 x 2 with Axle Hole
* Add 2 Part 4032 Black Plate, Round 2 x 2 with Axle Hole
|
These are rather complicated requests. First, although this set doesn't
have a year of release, the correct year of release is very likely 1998 to coincide
with the release of this set:
This surmise is an educated guess based on my knowledge of Educational/Dacta
items. If true, then it would have been years before 4032b with the X opening
began to appear. The special elements set, BTW, is a rare set for which little
other evidence is available. The current inventory has no source.
There is a second set with identical contents which was released in 2002:
This is exactly the same set with a different item number. This is not uncommon
and I believe the catalog has a couple handfuls of duplicate E&D entries due
to different item numbers being used for the same items (this happened fairly
frequently for E&D sets). In other words, this is likely the exactly the same
set which had been around since 1998.
The X opening appears in this set, but the source is parts list. This set is
the earliest instance of the X opening 4032 on BrickLink along with this set:
However, for 9649-1, the X opening appears as an alternate and was added along
with bluish gray parts - a clear indication that the set used for the changes
came from 2004 or later. Considering all of the above, I believe that the X
opening did not first appear until 2003.
Regardless of all that, though, the X opening 4032 is a far less common variant
which should not have been added to this set inventory without having been confirmed
with an actual set.
However, these requests are essentially based on conjecture and not facts, so
I will leave them open for a few days to give people the opportunity to comment/object
(and I'm certainly not above having my own requests rejected or rejecting
them myself).
|
|
Author: | StormChaser | Posted: | Apr 11, 2018 03:19 | Subject: | Inventory Change Request for Set 970089-1 | Viewed: | 25 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 2 Part 4032b Black Plate, Round 2 x 2 with Axle Hole - X Opening
* Delete 2 Part 4032b White Plate, Round 2 x 2 with Axle Hole - X Opening
* Add 2 Part 4032 White Plate, Round 2 x 2 with Axle Hole
* Add 2 Part 4032 Black Plate, Round 2 x 2 with Axle Hole
|
|
|
Author: | jimbo4273 | Posted: | Apr 10, 2018 19:04 | Subject: | Inventory Change Request for Set 8105-1 | Viewed: | 32 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Minifig exf015 Devastator - Pearl Light Gray Torso, Red Eyes
* Delete 1 Minifig exf009 Devastator - Trans-Red Torso, Red Eyes
Comments from Submitter:
The instructions and LEGO inventory page depicts a Devastator with a trans-red torso, but the set comes with a pearl light gray torso
|
|
Author: | normann1974 | Posted: | Apr 10, 2018 17:24 | Subject: | Inventory Change Request for Set 8416-1 | Viewed: | 35 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 4032b Red Plate, Round 2 x 2 with Axle Hole - X Opening (Alternate) (match ID 1)
* Change 2 Part Light Bluish Gray {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 1 Part Red 4032 Plate, Round 2 x 2 with Axle Hole {match ID 0 to 1}
Comments from Submitter:
Source: MISB-based set that were never mixed with other bricks.
|
|
Author: | normann1974 | Posted: | Apr 10, 2018 15:26 | Subject: | Re: Inventory Change Request for Set 8285-1 | Viewed: | 52 times | Topic: | Inventories Requests | |
| In Inventories Requests, Admin_Russell writes:
| In Inventories Requests, normann1974 writes:
| In Inventories Requests, normann1974 writes:
| Please make changes to the following inventory:
* Change 2 Part Yellow {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 2 Part Black {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
Source: MISB-based set that has never been mixed with other bricks.
|
Two questions have arised after re-counting my set before putting it up for sale:
1) Part
says that the "spring type" is "undetermined", but there are no variants to choose
between. Shouldn't there be some? Attached is a picture of the part in my
set.
|
Yes, what ever happened to 32181c01? There is a 32181c03:
Looks like we need one that has a spring.
| 2) After counting this set, I have 4 left over bricks: 1x black 32054, 2x black
41677, 1x LBG 6538c, and one brick is missing: 1x 32278. These extra/missing
parts seems to make up for the differences between the BL inventory and Peeron's
(I've actually verified Peeron's inventory some years ago). It seems
that BL's inventory corresponds with the parts list in the building instructions
but apparently, there are inconsistencies between this and the actual contents
of the box. I've tried counting the number of bricks required in the building
instructions for those four parts, but there are six books, and I can't make
any of the counts in either of the two models match any of BL's or Peeron's
counts. But how should I handle these missing/extra parts? (I can see that the
part I'm missing was added to the BL inventory in 2012 but not find the reason
why).
/Jan
|
This other situation could be a case of multiple instructions. Check yours against
some of the others listed in databases. Brickset is a great resource for this
- there is a link there provided by Swooshable that will give you all the major
sources.
|
I already checked that but forgot to write it.
My instruction's seem to be identical to the ones on the LEGO website, and
the inventory count in book 3 are the same counts as BL's inventory (e.g.
37x 32278). But that list obviously don't match the actual contents of my
and the Peeron inventory authors box contents and the actual number of parts
needed for the build. I just recounted the number of 32278's used to build
the main model. It's 36 (my count for the secondary model is 35).
/Jan
|
|
Author: | Admin_Russell | Posted: | Apr 10, 2018 14:51 | Subject: | Re: Inventory Change Request for Set 8285-1 | Viewed: | 51 times | Topic: | Inventories Requests | |
| In Inventories Requests, normann1974 writes:
| In Inventories Requests, normann1974 writes:
| Please make changes to the following inventory:
* Change 2 Part Yellow {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 2 Part Black {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
Source: MISB-based set that has never been mixed with other bricks.
|
Two questions have arised after re-counting my set before putting it up for sale:
1) Part
says that the "spring type" is "undetermined", but there are no variants to choose
between. Shouldn't there be some? Attached is a picture of the part in my
set.
|
Yes, what ever happened to 32181c01? There is a 32181c03:
Looks like we need one that has a spring.
| 2) After counting this set, I have 4 left over bricks: 1x black 32054, 2x black
41677, 1x LBG 6538c, and one brick is missing: 1x 32278. These extra/missing
parts seems to make up for the differences between the BL inventory and Peeron's
(I've actually verified Peeron's inventory some years ago). It seems
that BL's inventory corresponds with the parts list in the building instructions
but apparently, there are inconsistencies between this and the actual contents
of the box. I've tried counting the number of bricks required in the building
instructions for those four parts, but there are six books, and I can't make
any of the counts in either of the two models match any of BL's or Peeron's
counts. But how should I handle these missing/extra parts? (I can see that the
part I'm missing was added to the BL inventory in 2012 but not find the reason
why).
/Jan
|
This other situation could be a case of multiple instructions. Check yours against
some of the others listed in databases. Brickset is a great resource for this
- there is a link there provided by Swooshable that will give you all the major
sources.
|
|
Author: | normann1974 | Posted: | Apr 10, 2018 14:20 | Subject: | Re: Inventory Change Request for Set 8285-1 | Viewed: | 40 times | Topic: | Inventories Requests | |
| In Inventories Requests, normann1974 writes:
| Please make changes to the following inventory:
* Change 2 Part Yellow {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 2 Part Black {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
Source: MISB-based set that has never been mixed with other bricks.
|
Two questions have arised after re-counting my set before putting it up for sale:
1) Part
says that the "spring type" is "undetermined", but there are no variants to choose
between. Shouldn't there be some? Attached is a picture of the part in my
set.
2) After counting this set, I have 4 left over bricks: 1x black 32054, 2x black
41677, 1x LBG 6538c, and one brick is missing: 1x 32278. These extra/missing
parts seems to make up for the differences between the BL inventory and Peeron's
(I've actually verified Peeron's inventory some years ago). It seems
that BL's inventory corresponds with the parts list in the building instructions
but apparently, there are inconsistencies between this and the actual contents
of the box. I've tried counting the number of bricks required in the building
instructions for those four parts, but there are six books, and I can't make
any of the counts in either of the two models match any of BL's or Peeron's
counts. But how should I handle these missing/extra parts? (I can see that the
part I'm missing was added to the BL inventory in 2012 but not find the reason
why).
/Jan
|
|
|
Author: | normann1974 | Posted: | Apr 10, 2018 13:51 | Subject: | Inventory Change Request for Set 8285-1 | Viewed: | 51 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part Yellow {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 2 Part Black {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
Source: MISB-based set that has never been mixed with other bricks.
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|