Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | paulvdb | Posted: | Sep 5, 2019 23:59 | Subject: | Re: Inventory Change Request for Set 10733-1 | Viewed: | 15 times | Topic: | Inventories Requests | |
| In Inventories Requests, Petar_416 writes:
| Please make changes to the following inventory:
* Add 1 Part 30386 Reddish Brown Hinge Brick 1 x 2 Locking with 1 Finger Vertical End and 2 Fingers Vertical End
Comments from Submitter:
Part is missing in the list.
|
This part is included in the minifigure inventory for
|
|
Author: | axaday | Posted: | Sep 5, 2019 22:49 | Subject: | Re: Inventory Change Request for Set 5846-1 | Viewed: | 14 times | Topic: | Inventories Requests | |
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Add 3 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side (Extra)
* Change 1 Part {Green to Bright Green} 3741 Plant Flower Stem
* Change 1 Part {Green to Bright Green} x8 Plant Flower Stem 1 x 1 x 2/3 with 3 Large Leaves
* Change 4 Part {Green to Bright Green} 2518 Plant, Tree Palm Leaf Large 10 x 5
* Change 1 Part {Green to Bright Green} 3030 Plate 4 x 10
* Change 1 Part {Green to Bright Green} 4032 Plate, Round 2 x 2 with Axle Hole
Comments from Submitter:
Instructions show two trans-red 4073. Set contained 5.
|
|
|
|
Author: | axaday | Posted: | Sep 5, 2019 22:48 | Subject: | Inventory Change Request for Set 5846-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 3 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side (Extra)
* Change 1 Part {Green to Bright Green} 3741 Plant Flower Stem
* Change 1 Part {Green to Bright Green} x8 Plant Flower Stem 1 x 1 x 2/3 with 3 Large Leaves
* Change 4 Part {Green to Bright Green} 2518 Plant, Tree Palm Leaf Large 10 x 5
* Change 1 Part {Green to Bright Green} 3030 Plate 4 x 10
* Change 1 Part {Green to Bright Green} 4032 Plate, Round 2 x 2 with Axle Hole
Comments from Submitter:
Instructions show two trans-red 4073. Set contained 5.
|
|
Author: | Petar_416 | Posted: | Sep 5, 2019 22:35 | Subject: | Inventory Change Request for Set 7942-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part 3730 Light Bluish Gray Plate, Modified 2 x 2 with Towball Socket, Short, 4 Slots (match ID 1)
* Add 1 Part 63082 Light Bluish Gray Plate, Modified 2 x 2 with Towball Socket, Short, Flattened with Holes and Axle Hole in Center
|
Author: | Petar_416 | Posted: | Sep 5, 2019 22:04 | Subject: | Inventory Change Request for Set 10733-1 | Viewed: | 20 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 30386 Reddish Brown Hinge Brick 1 x 2 Locking with 1 Finger Vertical End and 2 Fingers Vertical End
Comments from Submitter:
Part is missing in the list.
|
|
Author: | detroitbricks | Posted: | Sep 5, 2019 21:14 | Subject: | Re: Help with another color | Viewed: | 23 times | Topic: | Colors | |
| In Colors, mmookk61 writes:
| In Colors, detroitbricks writes:
| In Colors, mmookk61 writes:
| In Colors, detroitbricks writes:
| Ok I have ran across another color issue, I have ran across this a few times
but this time both parts came from the same used set. Assume both are blue but
1 is discolored. Does anybody sell these or do they go in the scrap bin?
|
Put the set number into the list inventory button and see if there are two different
blues listed. What set is it?
|
I realized the lighting in my house in terrible, I tried for many pictures and
think this is it. The set is 3854 The Krusty Krab, and it says there is a 1x3
blue brick and the blue 1x2 jumper. Both are this weird blue and its 100% this
color even inside the brick.
|
Set 3825?
|
Yeah that's the set, I don't know where I got that other number from.
Trying to do to many things at once.
|
|
Author: | joesecc | Posted: | Sep 5, 2019 18:56 | Subject: | Inventory Change Request for Set 8899-1 | Viewed: | 24 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 62812pb11 Black Boat, Rubber Raft, Large with Green, White and Lime Stripes Pattern on Both Sides (Stickers) - Set 8899 (Counterpart)
Comments from Submitter:
Raft with stickers applied.
|
Author: | axaday | Posted: | Sep 5, 2019 18:40 | Subject: | Re: Inventory Change Request for Set 5846-1 | Viewed: | 15 times | Topic: | Inventories Requests | |
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Change 6 Part Brown {2536 Plant, Tree Palm Trunk - (Undetermined Connector Version) to 2536a Plant, Tree Palm Trunk - Long Indented Connector}
Comments from Submitter:
Sealed set, pic to follow
|
|
|
Author: | axaday | Posted: | Sep 5, 2019 18:39 | Subject: | Inventory Change Request for Set 5846-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 6 Part Brown {2536 Plant, Tree Palm Trunk - (Undetermined Connector Version) to 2536a Plant, Tree Palm Trunk - Long Indented Connector}
Comments from Submitter:
Sealed set, pic to follow
|
Author: | Adjour | Posted: | Sep 5, 2019 18:27 | Subject: | Re: Help with another color | Viewed: | 26 times | Topic: | Colors | |
| | The set is The Krusty Krab
|
I had an issue with this set recently. Many of the bricks were brittle, thought
it was brown instead.
Brittle blue is usually from much older sets, but I think something weird happened
with that set.
|
Author: | Fragty | Posted: | Sep 5, 2019 17:24 | Subject: | Re: Help with another color | Viewed: | 26 times | Topic: | Colors | |
| Yes this is "brittle blue" for sure.
It fits the color, its fits the time period
See here for more info about what brittle blue is:
https://www.flickr.com/photos/126975831@N07/15210784018
ps some ppl might collect these
|
|
Author: | bb316892 | Posted: | Sep 5, 2019 16:52 | Subject: | Re: Help with another color | Viewed: | 22 times | Topic: | Colors | |
| In Colors, detroitbricks writes:
| In Colors, mmookk61 writes:
| In Colors, detroitbricks writes:
| Ok I have ran across another color issue, I have ran across this a few times
but this time both parts came from the same used set. Assume both are blue but
1 is discolored. Does anybody sell these or do they go in the scrap bin?
|
Put the set number into the list inventory button and see if there are two different
blues listed. What set is it?
|
I realized the lighting in my house in terrible, I tried for many pictures and
think this is it. The set is 3854 The Krusty Krab, and it says there is a 1x3
blue brick and the blue 1x2 jumper. Both are this weird blue and its 100% this
color even inside the brick.
|
Set 3825?
|
|
Author: | detroitbricks | Posted: | Sep 5, 2019 16:41 | Subject: | Re: Help with another color | Viewed: | 28 times | Topic: | Colors | |
| In Colors, mmookk61 writes:
| In Colors, detroitbricks writes:
| Ok I have ran across another color issue, I have ran across this a few times
but this time both parts came from the same used set. Assume both are blue but
1 is discolored. Does anybody sell these or do they go in the scrap bin?
|
Put the set number into the list inventory button and see if there are two different
blues listed. What set is it?
|
I realized the lighting in my house in terrible, I tried for many pictures and
think this is it. The set is 3854 The Krusty Krab, and it says there is a 1x3
blue brick and the blue 1x2 jumper. Both are this weird blue and its 100% this
color even inside the brick.
|
|
|
Author: | FreeStorm | Posted: | Sep 5, 2019 15:57 | Subject: | Inside boxes from set 523-1 | Viewed: | 72 times | Topic: | Catalog | Status: | Open | |
| Today I received my bought set
Inside the box
There is two identical boxes with parts inside (look that funny rabbit)
Should I add these boxes as alternate picture of original box 523-1 or add as
a gear inside inventory of set 523-1 ?
-Fred
PS: maybe that box exist in catalog, but I do not find them.
|
|
|
Author: | WoutR | Posted: | Sep 5, 2019 15:39 | Subject: | Re: What year were part numbers introduced? | Viewed: | 38 times | Topic: | Catalog | |
| In Catalog, cosmicray writes:
| In Catalog, crazylegoman writes:
| In Catalog, 1271moggy writes:
| I have just wondering if anyone knew when Lego started putting the part number
on the pieces. I have just found part 3176 which looks fairly 'new'
but has no part number. It just has the numbers 5 and 04 on the underside.
What do these numbers refer to?
Apologies if this has been asked before - I cannot find a thread.
Thanking you all
|
The one or two digit numbers indicate molds and mold cavities in the actual machine
that creates the parts from liquid plastic injection. As far as what year TLC
started putting part numbers on the parts themselves, I'm afraid I do not
know.
David
|
Part number such as 3001 for a 2x4 brick ? Certainly the older CA parts had that,
so it must have been in the earliest days.
Nita Rae
|
The CA parts did have mold numbers (5 04) but not the part number (3176)
|
|
Author: | WoutR | Posted: | Sep 5, 2019 15:29 | Subject: | Re: What year were part numbers introduced? | Viewed: | 33 times | Topic: | Catalog | |
| In Catalog, 1271moggy writes:
| I have just wondering if anyone knew when Lego started putting the part number
on the pieces. I have just found part 3176 which looks fairly 'new'
but has no part number. It just has the numbers 5 and 04 on the underside.
What do these numbers refer to?
Apologies if this has been asked before - I cannot find a thread.
Thanking you all
|
If I remember correctly, around 1985.
|
|
Author: | cosmicray | Posted: | Sep 5, 2019 15:27 | Subject: | Re: What year were part numbers introduced? | Viewed: | 36 times | Topic: | Catalog | |
| In Catalog, crazylegoman writes:
| In Catalog, 1271moggy writes:
| I have just wondering if anyone knew when Lego started putting the part number
on the pieces. I have just found part 3176 which looks fairly 'new'
but has no part number. It just has the numbers 5 and 04 on the underside.
What do these numbers refer to?
Apologies if this has been asked before - I cannot find a thread.
Thanking you all
|
The one or two digit numbers indicate molds and mold cavities in the actual machine
that creates the parts from liquid plastic injection. As far as what year TLC
started putting part numbers on the parts themselves, I'm afraid I do not
know.
David
|
Part number such as 3001 for a 2x4 brick ? Certainly the older CA parts had that,
so it must have been in the earliest days.
Nita Rae
|
|
Author: | crazylegoman | Posted: | Sep 5, 2019 11:37 | Subject: | Re: What year were part numbers introduced? | Viewed: | 40 times | Topic: | Catalog | |
| In Catalog, 1271moggy writes:
| I have just wondering if anyone knew when Lego started putting the part number
on the pieces. I have just found part 3176 which looks fairly 'new'
but has no part number. It just has the numbers 5 and 04 on the underside.
What do these numbers refer to?
Apologies if this has been asked before - I cannot find a thread.
Thanking you all
|
The one or two digit numbers indicate molds and mold cavities in the actual machine
that creates the parts from liquid plastic injection. As far as what year TLC
started putting part numbers on the parts themselves, I'm afraid I do not
know.
David
|
|
Author: | pikachu3 | Posted: | Sep 5, 2019 10:30 | Subject: | Re: Help with color | Viewed: | 24 times | Topic: | Colors | |
| In Colors, randyf writes:
| In Colors, WoutR writes:
| I have discussed copper with Admins in the past, I think it is time for an update
|
The only color that I could see a chance of getting added would be something
akin to "Metallic Gold" or "Metallic Silver" to separate surface-coated copper
parts from copper-color molded parts. Beyond that, it would be highly unlikely
to get any consensus to make further changes.
Cheers,
Randy
|
+1 for Metallic Copper
I don't know of any part that comes in more than one copper color; without
any overlap, it makes sense to keep all the pearl copper colors together here.
|
|
Author: | WoutR | Posted: | Sep 5, 2019 10:09 | Subject: | Re: Help with color | Viewed: | 34 times | Topic: | Colors | |
| In Colors, randyf writes:
| In Colors, WoutR writes:
| I have discussed copper with Admins in the past, I think it is time for an update
|
The only color that I could see a chance of getting added would be something
akin to "Metallic Gold" or "Metallic Silver" to separate surface-coated copper
parts from copper-color molded parts. Beyond that, it would be highly unlikely
to get any consensus to make further changes.
Cheers,
Randy
|
That would be my priority also. I think we need a Metallic Copper.
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|