Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | HoleintheWall | Posted: | May 1, 2022 23:48 | Subject: | Re: Ontario, Canada Business-in-home Insurance | Viewed: | 38 times | Topic: | Selling | |
| I'm a little angry at my insurance company for dropping me, but... better
to find this out now than after a catastrophic event happens. I'll just
have to find homeowners insurance that is ok with me having a small business
in the house with commercial insurance I guess.
In Selling, Cob writes:
| My sister sells insurance and I asked this question.
She recommended a separate policy for the business and her company policies wouldn't
provide enough coverage for a small business. There is a limited amount of coverage
for personal assets through homeowners, however it would be combined with all
your home's belongings. In the event of a total loss she didn't think
I would be adequately covered.
|
|
|
Author: | Cob | Posted: | May 1, 2022 23:20 | Subject: | Re: Ontario, Canada Business-in-home Insurance | Viewed: | 43 times | Topic: | Selling | |
| My sister sells insurance and I asked this question.
She recommended a separate policy for the business and her company policies wouldn't
provide enough coverage for a small business. There is a limited amount of coverage
for personal assets through homeowners, however it would be combined with all
your home's belongings. In the event of a total loss she didn't think
I would be adequately covered.
In Selling, HoleintheWall writes:
| tldr: need insurance company in Ontario, Canada that will cover home insurance
and business-in-home insurance.
I started my Bricklink business around 1.5-2 years ago, and am in the process
of starting up a small computer business as well. Between the two businesses
the assets are material enough that I would like to have them covered by insurance.
I called up my insurance company (TD) to see if I could get coverage added to
home policy for business assets.
After waiting for a few days they called me back and told me that not only will
they Not cover it, but they will not be renewing my policy when it expires as
well. I asked for clarification and they stated that the value of my business
assets exceed their risk tolerance values. I than asked what if I purchased separate
commercial property insurance for the business assets and they stated the policy
would still not be renewed.
Soooo, that leaves me looking for a new insurance company. I've started calling
around to a couple different insurance brokers in town, but I was wondering if
anybody here might have some suggestions.
|
|
|
Author: | HoleintheWall | Posted: | May 1, 2022 23:09 | Subject: | Ontario, Canada Business-in-home Insurance | Viewed: | 107 times | Topic: | Selling | |
| tldr: need insurance company in Ontario, Canada that will cover home insurance
and business-in-home insurance.
I started my Bricklink business around 1.5-2 years ago, and am in the process
of starting up a small computer business as well. Between the two businesses
the assets are material enough that I would like to have them covered by insurance.
I called up my insurance company (TD) to see if I could get coverage added to
home policy for business assets.
After waiting for a few days they called me back and told me that not only will
they Not cover it, but they will not be renewing my policy when it expires as
well. I asked for clarification and they stated that the value of my business
assets exceed their risk tolerance values. I than asked what if I purchased separate
commercial property insurance for the business assets and they stated the policy
would still not be renewed.
Soooo, that leaves me looking for a new insurance company. I've started calling
around to a couple different insurance brokers in town, but I was wondering if
anybody here might have some suggestions.
|
|
Author: | PieceOfMind | Posted: | May 1, 2022 23:07 | Subject: | Re: Sold item not removed from Inventory | Viewed: | 43 times | Topic: | Technical Issues | |
| In Technical Issues, beaverbrick writes:
| In Technical Issues, PieceOfMind writes:
| I had a rare Lego which was ordered on April 12. I didn't happen to check
my inventory or website so I don't know if it remained or was deleted. On
April 27th I received another order for the same part. I've only been doing
this for 2 months, does anyone know how this happened?
|
Possibly a duplicate listing.
If you open the original order (for the piece you sold) and hover over the image
of the item, you can see the Lot ID (see attached image).
Compare this Lot ID with the second order. If the Lot ID's are different
then you had a duplicate listing.
|
Thank you so much, that's what I did
|
|
Author: | coupleoldbricks | Posted: | May 1, 2022 22:18 | Subject: | May the 4th ~ Entire Star Wars Line on Sales | Viewed: | 93 times | Topic: | Announce | |
| May the 4th Sales , One Day Only, Don’t Miss it! |
|
Author: | Brickdude101 | Posted: | May 1, 2022 22:09 | Subject: | ENTIRE STORE ON SALE!! 5 % OFF EVERYTHING , | Viewed: | 50 times | Topic: | Sales | |
| ENTIRE STORE 5% OFF SALE, OLD SETS,NEW SETS , RETIRED SETS, ALL FEES INCLUDED
EXCEPT SHIPPING COSY
|
Author: | TheCuteGiraffe | Posted: | May 1, 2022 22:08 | Subject: | Re: MOC Sandcrawler Cavegood | Viewed: | 63 times | Topic: | LANG Deutsch | |
| Schauen Sie in rebrickable nach ähnlichen Mocs. Sie können dem Ersteller dieses
Mocs auch eine E-Mail senden.
|
Author: | TheCuteGiraffe | Posted: | May 1, 2022 22:02 | Subject: | Re: Lego Suicide Squad | Viewed: | 43 times | Topic: | LEGO products | |
| Thanks the one from apocolypseburg is awesome but very pricy. |
|
Author: | TodBrick | Posted: | May 1, 2022 22:02 | Subject: | MAY THE 4TH BE WITH YOU SALE @ TodBrick | Viewed: | 57 times | Topic: | Sales | |
| TODBRICK - “MAY THE FOURTH BE WITH YOU SALE’ on all STAR WARS Inventory Starts
TODAY!
* SAVE 10% on ALL Star Wars INSTRUCTIONS & TODBRICK - “MAY THE FOURTH BE WITH
YOU SALE’ on all STAR WARS Inventory Starts TODAY!
* SAVE 10% on ALL Star Wars INSTRUCTIONS & BOXES
* SAVE 15% on ALL Star Wars SETS & GEAR
* SAVE 20% on ALL Star Wars MINIFIGURES!
Please visit us at store.bricklink.com/todbrick and check out our new inventory
of Star Wars Vintage Sets as well:
- 7171 Mos Espa Podrace
- 7128 Speeder Bikes
- 7121 Naboo Swamp
- 7101 Lightsaber Duel
- 7110 Landspeeder
- 7115 Gungan Patrol
Check out the fun at TodBrick and always #bricktogether !
Sharing the Lego Love! Peace out!
#legosale #maythe4thbewithyou #maytheforcebewithyou #maythefourthbewithyou
#legobc #legovictoria #legoinreallife #inlegolife #inreallife #legoshop #afol
#bricklink #legoafols #lovelego #todbrick #brickingtogether #legocanada #lego
#usedlego #newlego #bricktogether #itod #todgod @todbrick
* SAVE 15% on ALL Star Wars SETS & GEAR
* SAVE 20% on ALL Star Wars MINIFIGURES!
Please visit us at store.bricklink.com/todbrick and check out our new inventory
of Star Wars Vintage Sets as well:
- 7171 Mos Espa Podrace
- 7128 Speeder Bikes
- 7121 Naboo Swamp
- 7101 Lightsaber Duel
- 7110 Landspeeder
- 7115 Gungan Patrol
Check out the fun at TodBrick and always #bricktogether !
Sharing the Lego Love! Peace out!
#legosale #maythe4thbewithyou #maytheforcebewithyou #maythefourthbewithyou
#legobc #legovictoria #legoinreallife #inlegolife #inreallife #legoshop #afol
#bricklink #legoafols #lovelego #todbrick #brickingtogether #legocanada #lego
#usedlego #newlego #bricktogether #itod #todgod @todbrick
|
|
|
Author: | wildchicken13 | Posted: | May 1, 2022 22:01 | Subject: | Re: Trading Clones for Clones | Viewed: | 48 times | Topic: | Trades | |
| In Trades, Terrryvoss writes:
| Hello!
If anyone has any of the new 187th clone troopers, I have a 332nd trooper from
the 75283 AAT as well as a few 501st troopers. I was thinking two or three of
them. Thanks!
|
At first I thought you were talking about this kind of clone: https://en.wikipedia.org/wiki/Lego_clone
|
Author: | TheCuteGiraffe | Posted: | May 1, 2022 22:01 | Subject: | Re: Lego Suicide Squad | Viewed: | 28 times | Topic: | LEGO products | |
| Thanks I'll have a look. |
Author: | TheCuteGiraffe | Posted: | May 1, 2022 22:00 | Subject: | Re: address change | Viewed: | 17 times | Topic: | Help | |
| You probably need to wait for it to change. This can take ages or can be very
quick.
|
Author: | Carissamiss | Posted: | May 1, 2022 21:54 | Subject: | Re: address change | Viewed: | 19 times | Topic: | Help | |
| Yes, under “Store Settings” then “management”, at the very bottom it shows your
store’s address which you need to change separately.
In Help, Brick_Chix writes:
| I changed my address in the accounts setting section 12 days ago. On the bottom
of the order summary it still has my old address.
Is there some where else I need to change my address?
|
|
|
Author: | axaday | Posted: | May 1, 2022 21:49 | Subject: | Re: Problem with Loonbricks | Viewed: | 104 times | Topic: | Problem Order | |
| In Problem Order, Navis62 writes:
| Hello
I made an order in Loonbricks shop.
I paid via bank transfer as it was a possibility he gave me in the mail of the
order.
It has been a month and he has not shipped the order yet. He does not respond
to mails but his shop seems to be still active. Can I contact an admin to "force"
him to respond ?
|
His feedback indicates this is an ongoing problem. I'm still guessing that
mine will eventually ship. I order 12 days ago, but I have plenty else to do.
|
Author: | Brick_Chix | Posted: | May 1, 2022 21:45 | Subject: | address change | Viewed: | 49 times | Topic: | Help | |
| I changed my address in the accounts setting section 12 days ago. On the bottom
of the order summary it still has my old address.
Is there some where else I need to change my address?
|
|
Author: | axaday | Posted: | May 1, 2022 21:45 | Subject: | Re: Inventory Change Request for Set 9247-2 | Viewed: | 25 times | Topic: | Inventories Requests | |
| People will laugh at the conversation I am having with myself here!
I am not confident that I didn't take pictures when I opened this set. But
I would stand against taking the assembled bike out of the inventory. I feel
pretty sure that I got it in mine.
In Inventories Requests, axaday writes:
| I will do a deeper check for opening pics soon, but I have had and sold too many
red bikes to be certain in the last year. But my preponderance of assembled bicycles
gives me a strong confidence that mine came that way. I definitely wouldn’t have
assembled them if they didn’t come that way and if they came unassembled And
I was expecting assembled, I very very likely would have made a change request.
I don’t remember if I was asked or recorded a date stamp from mine here. I may
still have the box. But something I already see that may help with the discussion
is that I added a variant minifig with a curved cap. That would indicate that
mine was manufactured at least as late as 2009. Long production run.
In Inventories Requests, axaday writes:
| I have not found opening pics. I do forget to do it sometimes. I have 8 red
assembled bicycles and they all have 2 piece wheels. I checked that. All of those
would have come from the factory assembled. I have one red bicycle with 2 piece
wheels that is not assembled. Later I will see if I can work out provenance on
those.
In Inventories Requests, axaday writes:
| I am on my phone in the car headed home from Wichita. I should have pics from
opening this set last summer. I may have the bikes still also. I opened a bunch
of similar sets last summer and did not assemble bikes that didn’t Come that
way. I would like to think I would have made a request, but it is worth looking
at my records at home.
In Inventories Requests, randyipp writes:
| In Inventories Requests, TakeAbricK writes:
| In Inventories Requests, randyipp writes:
| In Inventories Requests, TakeAbricK writes:
|
ok, but did they come assembled in the box, or in un-assembled frames and wheels?
|
They were not assembled.
|
Assembled parts only come in inventories as regular items, when they also came
assembled in the box. Otherwise the assembled bicycles should be listed as counterparts.
|
But they have, just not this last time I parted out the sets. 9348-1 bicycles
have never been assembled as far as I can tell. I think Axaday also parted out
this set and had an assembled bicycle, but that is speculation.
|
This means the assembled bicycles already in the inventory should be changed
to counterpart.
The new assembled bicycles should be added as counterpart.
No Match-id's for counterparts.
The bicycle frames should be added as regular
The 2-piece wheels as regular
The 1-piece wheels as alternate
Both with the same Match-ID (first free one)
Do you want to try again?
Diana
|
If they have come both ways, which way takes precedence? I agree it would probably
make the most sense to switch them to counter part and have a match id on the
wheels only to be more in line with the rest of the sets.
|
|
|
|
|
|
Author: | Terrryvoss | Posted: | May 1, 2022 20:45 | Subject: | Trading Clones for Clones | Viewed: | 94 times | Topic: | Trades | |
| Hello!
If anyone has any of the new 187th clone troopers, I have a 332nd trooper from
the 75283 AAT as well as a few 501st troopers. I was thinking two or three of
them. Thanks!
|
Author: | Styphelus | Posted: | May 1, 2022 20:43 | Subject: | Re: Designer Program Round 3 | Viewed: | 65 times | Topic: | Designer Program | |
| Brickwest Studios was initially priced at $279.99 for round 2. Then it got postponed
to round 3 due to the Alec Ballwin movie incident. it's now listed at $499.99
CDN. That's almost double the initial price from a few months ago. Doesn't
even come with mini figures.
|
|
Author: | axaday | Posted: | May 1, 2022 20:41 | Subject: | Re: Inventory Change Request for Set 9247-2 | Viewed: | 21 times | Topic: | Inventories Requests | |
| I will do a deeper check for opening pics soon, but I have had and sold too many
red bikes to be certain in the last year. But my preponderance of assembled bicycles
gives me a strong confidence that mine came that way. I definitely wouldn’t have
assembled them if they didn’t come that way and if they came unassembled And
I was expecting assembled, I very very likely would have made a change request.
I don’t remember if I was asked or recorded a date stamp from mine here. I may
still have the box. But something I already see that may help with the discussion
is that I added a variant minifig with a curved cap. That would indicate that
mine was manufactured at least as late as 2009. Long production run.
In Inventories Requests, axaday writes:
| I have not found opening pics. I do forget to do it sometimes. I have 8 red
assembled bicycles and they all have 2 piece wheels. I checked that. All of those
would have come from the factory assembled. I have one red bicycle with 2 piece
wheels that is not assembled. Later I will see if I can work out provenance on
those.
In Inventories Requests, axaday writes:
| I am on my phone in the car headed home from Wichita. I should have pics from
opening this set last summer. I may have the bikes still also. I opened a bunch
of similar sets last summer and did not assemble bikes that didn’t Come that
way. I would like to think I would have made a request, but it is worth looking
at my records at home.
In Inventories Requests, randyipp writes:
| In Inventories Requests, TakeAbricK writes:
| In Inventories Requests, randyipp writes:
| In Inventories Requests, TakeAbricK writes:
|
ok, but did they come assembled in the box, or in un-assembled frames and wheels?
|
They were not assembled.
|
Assembled parts only come in inventories as regular items, when they also came
assembled in the box. Otherwise the assembled bicycles should be listed as counterparts.
|
But they have, just not this last time I parted out the sets. 9348-1 bicycles
have never been assembled as far as I can tell. I think Axaday also parted out
this set and had an assembled bicycle, but that is speculation.
|
This means the assembled bicycles already in the inventory should be changed
to counterpart.
The new assembled bicycles should be added as counterpart.
No Match-id's for counterparts.
The bicycle frames should be added as regular
The 2-piece wheels as regular
The 1-piece wheels as alternate
Both with the same Match-ID (first free one)
Do you want to try again?
Diana
|
If they have come both ways, which way takes precedence? I agree it would probably
make the most sense to switch them to counter part and have a match id on the
wheels only to be more in line with the rest of the sets.
|
|
|
|
|
Author: | here4bricks614 | Posted: | May 1, 2022 20:33 | Subject: | Re: Copper to Reddish Gold | Viewed: | 29 times | Topic: | Catalog Requests | |
| In Catalog Requests, axaday writes:
| I bought 8813 over a week ago and it is marked packed, but it is a seller that
was pointed out as a slow shipper in the forum.
In Catalog Requests, here4bricks614 writes:
| In Catalog Requests, axaday writes:
| In Catalog Requests, here4bricks614 writes:
| | | -----------------------------------------------------
|
| I believe all 48495s should be moved to Reddish Gold. As it stands, a buyer-seller
issue exists because Reddish Gold swords exist under ‘Reddish Gold’ and ‘Copper’.
A buyer would be incredibly confused to learn that both swords they purchased
were the exact same color, leading to potential bad reviews that are of no fault
of the seller. There’s enough evidence to suggest that this part does not exist
in Copper.
|
I have one of the copper sets on the way. I doubt I will be able to open the
castle, but it is possible I will be able to get the chess set.
|
The castle's runtime was within Reddish Gold's, as in before Pearl Gold
was around. The set absolutely has Reddish Gold swords, but we need photo evidence.
I will try to look for some. The chess set should also contain Reddish Gold swords.
I am still unsure about 8813 and 8823.
That being said, the Gear section needs some work. I mean: https://www.bricklink.com/catalogItemIn.asp?P=3010&colorID=44&in=A
A 1x4 brick in Light Violet appearing in a 2016 gear?
|
|
The alternate section is what bugs me about that set. Alternate undetermined
part? If the sword you find is Pearl Gold, I suggest removing the Copper sword
from the set. It’s highly unlikely that 2006 was still using that color, and
the current inventory could have been the result of a mistake or somebody who
bought a second hand set with the wrong sword.
|
|
Author: | axaday | Posted: | May 1, 2022 20:26 | Subject: | Re: Inventory Change Request for Set 9247-2 | Viewed: | 21 times | Topic: | Inventories Requests | |
| I have not found opening pics. I do forget to do it sometimes. I have 8 red
assembled bicycles and they all have 2 piece wheels. I checked that. All of those
would have come from the factory assembled. I have one red bicycle with 2 piece
wheels that is not assembled. Later I will see if I can work out provenance on
those.
In Inventories Requests, axaday writes:
| I am on my phone in the car headed home from Wichita. I should have pics from
opening this set last summer. I may have the bikes still also. I opened a bunch
of similar sets last summer and did not assemble bikes that didn’t Come that
way. I would like to think I would have made a request, but it is worth looking
at my records at home.
In Inventories Requests, randyipp writes:
| In Inventories Requests, TakeAbricK writes:
| In Inventories Requests, randyipp writes:
| In Inventories Requests, TakeAbricK writes:
|
ok, but did they come assembled in the box, or in un-assembled frames and wheels?
|
They were not assembled.
|
Assembled parts only come in inventories as regular items, when they also came
assembled in the box. Otherwise the assembled bicycles should be listed as counterparts.
|
But they have, just not this last time I parted out the sets. 9348-1 bicycles
have never been assembled as far as I can tell. I think Axaday also parted out
this set and had an assembled bicycle, but that is speculation.
|
This means the assembled bicycles already in the inventory should be changed
to counterpart.
The new assembled bicycles should be added as counterpart.
No Match-id's for counterparts.
The bicycle frames should be added as regular
The 2-piece wheels as regular
The 1-piece wheels as alternate
Both with the same Match-ID (first free one)
Do you want to try again?
Diana
|
If they have come both ways, which way takes precedence? I agree it would probably
make the most sense to switch them to counter part and have a match id on the
wheels only to be more in line with the rest of the sets.
|
|
|
|
Author: | levithelegit | Posted: | May 1, 2022 20:16 | Subject: | New inventory, adding parts, more to come! | Viewed: | 31 times | Topic: | New Stores | |
| Hi there!
I've been selling on bricklink for about a month now. Just started adding
a parts inventory, beginning with figures and animals. Please check it out! Excited
to see you there.
Levi
|
|
Author: | axaday | Posted: | May 1, 2022 20:15 | Subject: | Re: Copper to Reddish Gold | Viewed: | 32 times | Topic: | Catalog Requests | |
| I bought 8813 over a week ago and it is marked packed, but it is a seller that
was pointed out as a slow shipper in the forum.
In Catalog Requests, here4bricks614 writes:
| In Catalog Requests, axaday writes:
| In Catalog Requests, here4bricks614 writes:
| | | -----------------------------------------------------
|
| I believe all 48495s should be moved to Reddish Gold. As it stands, a buyer-seller
issue exists because Reddish Gold swords exist under ‘Reddish Gold’ and ‘Copper’.
A buyer would be incredibly confused to learn that both swords they purchased
were the exact same color, leading to potential bad reviews that are of no fault
of the seller. There’s enough evidence to suggest that this part does not exist
in Copper.
|
I have one of the copper sets on the way. I doubt I will be able to open the
castle, but it is possible I will be able to get the chess set.
|
The castle's runtime was within Reddish Gold's, as in before Pearl Gold
was around. The set absolutely has Reddish Gold swords, but we need photo evidence.
I will try to look for some. The chess set should also contain Reddish Gold swords.
I am still unsure about 8813 and 8823.
That being said, the Gear section needs some work. I mean: https://www.bricklink.com/catalogItemIn.asp?P=3010&colorID=44&in=A
A 1x4 brick in Light Violet appearing in a 2016 gear?
|
|
|
Author: | axaday | Posted: | May 1, 2022 20:13 | Subject: | Re: Problem with Loonbricks | Viewed: | 94 times | Topic: | Problem Order | |
| In Problem Order, Navis62 writes:
| Hello
I made an order in Loonbricks shop.
I paid via bank transfer as it was a possibility he gave me in the mail of the
order.
It has been a month and he has not shipped the order yet. He does not respond
to mails but his shop seems to be still active. Can I contact an admin to "force"
him to respond ?
|
Oh ouch. I am waiting on the same seller.
|
|
Author: | jennnifer | Posted: | May 1, 2022 20:11 | Subject: | Re: Copper to Reddish Gold | Viewed: | 39 times | Topic: | Catalog Requests | |
| In Catalog Requests, jennnifer writes:
| |
I tried to fix these colors many years ago but was unsuccessful.
I purchased a
New and Sealed to check the colors. Now I just have to find it again...
Jen
|
Found it!
I can't take better pics until tomorrow but here's what I got:
|
I will open tomorrow to confirm, but both the king and the purple knight are
holding a sword that matches this one here in the middle. Copper and Pearl Gold
scimitar included for comparison. There is obviously no Yellow sword in my set.
Jen
|
|
|
Author: | wildchicken13 | Posted: | May 1, 2022 20:04 | Subject: | Re: Problem with Loonbricks | Viewed: | 95 times | Topic: | Problem Order | |
| In Problem Order, Navis62 writes:
| Hello
I made an order in Loonbricks shop.
I paid via bank transfer as it was a possibility he gave me in the mail of the
order.
It has been a month and he has not shipped the order yet. He does not respond
to mails but his shop seems to be still active. Can I contact an admin to "force"
him to respond ?
|
File a non-responding seller (NRS) or non-shipping seller (NSS) alert: https://www.bricklink.com/retractOrder.asp
|
|
Author: | Navis62 | Posted: | May 1, 2022 20:00 | Subject: | Problem with Loonbricks | Viewed: | 275 times | Topic: | Problem Order | |
| Hello
I made an order in Loonbricks shop.
I paid via bank transfer as it was a possibility he gave me in the mail of the
order.
It has been a month and he has not shipped the order yet. He does not respond
to mails but his shop seems to be still active. Can I contact an admin to "force"
him to respond ?
|
|
Author: | jennnifer | Posted: | May 1, 2022 19:53 | Subject: | Re: Copper to Reddish Gold | Viewed: | 45 times | Topic: | Catalog Requests | |
| In Catalog Requests, jennnifer writes:
| In Catalog Requests, axaday writes:
| In Catalog Requests, WoutR writes:
| In Catalog Requests, axaday writes:
| In Catalog Requests, WoutR writes:
|
Metallic gold would be a coating. I have not found any swords in other "copper"-shades
than Reddish Gold. As far as I know, those parts do not exist.
|
I bought this sword the other day in metallic gold and copper. I discussed with
the seller, in advance, my doubts that the colors existed and pointed him to
my comparison pics and he felt confident that he had them. My doubts have not
disappeared and I'm not going to be demanding any refunds or anything, but
I am hoping that one or the other might teach us something.
|
I think such confusion is to be expected when
1) the BrickLink catalog conflates colors, and
2) there is variation within the LEGO colors.
|
He did say his copper sword doesn't look like the 3rd party render, but it
looked like the copper image that was there before the 3rd party render. I have
no experience with the previous image. But he felt confident it wasn't reddish
gold. We'll see in a few days. Metallic Gold would shock me, but I really
hope there is a copper one.
|
I tried to fix these colors many years ago but was unsuccessful.
I purchased a
New and Sealed to check the colors. Now I just have to find it again...
Jen
|
Found it!
I can't take better pics until tomorrow but here's what I got:
|
|
|
Author: | popsicle | Posted: | May 1, 2022 19:53 | Subject: | Re: Future date for orders in the past...? | Viewed: | 43 times | Topic: | Technical Issues | |
| In Technical Issues, 1001bricks writes:
| | | Weird... but even weirder how can you get an order list for a specific shop???
|
Hover over the Cart icon in the upper right, for dropdown. Hit the Orders
Placed in Store link within the dropdown
|
Thanks - but wow - I swear, didn't even notice this feature!
|
A familiar sentiment around here... one I know well
|
Of course I've my data, but couldn't figure how people would do this.
Thanks Popcycle!
|
You're welcome, O' He of The Forest!
But call me popsicle or Cory (unlike Maxx, I don't cycle) Or just
go with the old adage "Call me whatcha want, just don't call me late to supper"
|
|
Author: | here4bricks614 | Posted: | May 1, 2022 19:31 | Subject: | Inventory Change Request for Set 5462-1 | Viewed: | 15 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part {Medium Blue to Sky Blue} 71370c01 Primo Vehicle Boat Bathtime with Red Top
Comments from Submitter:
Found ElementID 4250345 for a TLG 232 Dove Blue part 71370. The bottom part of the Trans-Light Blue assembly is also Sky Blue.
|
|
Author: | 1001bricks | Posted: | May 1, 2022 19:14 | Subject: | Re: Future date for orders in the past...? | Viewed: | 27 times | Topic: | Technical Issues | |
| | | Weird... but even weirder how can you get an order list for a specific shop???
|
Hover over the Cart icon in the upper right, for dropdown. Hit the Orders
Placed in Store link within the dropdown
|
Thanks - but wow - I swear, didn't even notice this feature!
Of course I've my data, but couldn't figure how people would do this.
Thanks Popcycle!
|
Author: | Taz21 | Posted: | May 1, 2022 19:08 | Subject: | 10 percent off all minifigs 30 percent off re | Viewed: | 38 times | Topic: | Sales | |
| Only thing not on sale are sets. 10 percent off figs 30 percent everything else
sale going on till midnight Texas time April 2 2022. So hurry in get you a deal
while supplies last.
|
|
Author: | brmiller | Posted: | May 1, 2022 19:01 | Subject: | Inventory Change Request for Set 70676-1 | Viewed: | 17 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 15068 White Slope, Curved 2 x 2 x 2/3 (Counterpart)
* Add 1 Part 15068 White Slope, Curved 2 x 2 x 2/3 (Counterpart)
* Add 1 Part 15068 White Slope, Curved 2 x 2 x 2/3 (Counterpart)
* Add 1 Part 85970 White Slope, Curved 10 x 1 (Counterpart)
* Add 1 Part 98834 White Vehicle, Spoiler with Bar Handle (Counterpart)
* Add 4 Part 15068 Sand Green Slope, Curved 2 x 2 x 2/3 (Counterpart)
Comments from Submitter:
The items listed above are stickered in this set. I will give details as delineated above.
1. Item No 15068 in white - two of these pieces have a gold sticker w/ black vents (see page 118 of instruction booklet)
2. Item No 15068 in white - one of these pieces has a white sticker on it with "C1" written twice in sand green along with another line in sand green and more lines in black (see page 147 of the instruction booklet)
3. Item No 15068 in white - one of these pieces has a white sticker with a sand green snowflake-like design on it (see page 148 of the instruction booklet)
4. Item No 85970 in white - one of these pieces has a white sticker with gold details on it (see page 19 of the instruction booklet)
5. Item No 98834 in white - one of these pieces has a white sticker with gold and black print on it (see page 65 of the instruction booklet)
6. Item No 15068 in sand green - four of these pieces have a sand greens sticker with "C1" in gold on them (see page 142 and 144 of the instruction booklet)
Pictures of the stickered parts can be submitted if that will be of help.
|
|
Author: | popsicle | Posted: | May 1, 2022 19:00 | Subject: | Re: Future date for orders in the past...? | Viewed: | 37 times | Topic: | Technical Issues | |
| In Technical Issues, 1001bricks writes:
| In Technical Issues, StarBrick writes:
| As I was searching through a shop, I wondered when the last order I placed here
was made.
So I checked.
And saw.... an order with a date, yet to come on the calendar (check picture!).
What happened in the database???
|
Weird... but even weirder how can you get an order list for a specific shop???
|
Hover over the Cart icon in the upper right, for dropdown. Hit the Orders
Placed in Store link within the dropdown
|
|
Author: | landmbrick | Posted: | May 1, 2022 18:52 | Subject: | 60% off all inventory | Viewed: | 116 times | Topic: | Sales | |
| 60% off all inventory!! Just added some used parts that are in great shape.( no international at this time) |
|
Author: | krisz590 | Posted: | May 1, 2022 18:40 | Subject: | Re: Buyer purchases then asks for extra parts | Viewed: | 48 times | Topic: | Problem | |
| In Problem, brac.brick writes:
| Just wondering what the general consensus is when a buyer makes a purchase in
your store , you pull it, invoice it and then they start asking for extra parts
. (not included in the invoice). I have had this happen several times recently,
some buyer have already paid and sent the message and others have not paid yet
.
Not sure if this is a recent trend or I am just the unlucky seller who gets
these requests. These aren't usually requests for parts which are expensive
and I usually decide on a case by case basis. Just wondering what the rest of
you do about requests like these if you get them.
|
If the order has not been paid for, just tell them to order the parts they require
in the normal manner, and their existing existing list will be updated automatically.
Then send them an updated invoice.
|
|
Author: | 1001bricks | Posted: | May 1, 2022 18:40 | Subject: | Re: Future date for orders in the past...? | Viewed: | 36 times | Topic: | Technical Issues | |
| In Technical Issues, StarBrick writes:
| As I was searching through a shop, I wondered when the last order I placed here
was made.
So I checked.
And saw.... an order with a date, yet to come on the calendar (check picture!).
What happened in the database???
|
Weird... but even weirder how can you get an order list for a specific shop???
|
Author: | peregrinator | Posted: | May 1, 2022 18:23 | Subject: | Re: Fedex ... you missed | Viewed: | 57 times | Topic: | Shipping | |
| In Shipping, jennnifer writes:
| I am used to this sort of thing from the USPS, but this is the first from Fedex.
I live about an hour from the LEGO distribution center in Romeoville. My package
is now supposed to arrive on Tuesday after having a little vacation in Utah.
|
Interesting, the last few packages I've gotten from lego.com haven't
been shipped via FedEx.
|
Author: | peregrinator | Posted: | May 1, 2022 18:21 | Subject: | Re: Future date for orders in the past...? | Viewed: | 27 times | Topic: | Technical Issues | |
| In Technical Issues, StarBrick writes:
| As I was searching through a shop, I wondered when the last order I placed here
was made.
So I checked.
And saw.... an order with a date, yet to come on the calendar (check picture!).
What happened in the database???
|
Weird. That order ID was probably December of 2021. Hopefully a display issue.
|
|
Author: | here4bricks614 | Posted: | May 1, 2022 18:09 | Subject: | Re: Copper to Reddish Gold | Viewed: | 35 times | Topic: | Catalog Requests | |
| In Catalog Requests, axaday writes:
| In Catalog Requests, here4bricks614 writes:
| | | -----------------------------------------------------
|
| I believe all 48495s should be moved to Reddish Gold. As it stands, a buyer-seller
issue exists because Reddish Gold swords exist under ‘Reddish Gold’ and ‘Copper’.
A buyer would be incredibly confused to learn that both swords they purchased
were the exact same color, leading to potential bad reviews that are of no fault
of the seller. There’s enough evidence to suggest that this part does not exist
in Copper.
|
I have one of the copper sets on the way. I doubt I will be able to open the
castle, but it is possible I will be able to get the chess set.
|
The castle's runtime was within Reddish Gold's, as in before Pearl Gold
was around. The set absolutely has Reddish Gold swords, but we need photo evidence.
I will try to look for some. The chess set should also contain Reddish Gold swords.
I am still unsure about 8813 and 8823.
That being said, the Gear section needs some work. I mean: https://www.bricklink.com/catalogItemIn.asp?P=3010&colorID=44&in=A
A 1x4 brick in Light Violet appearing in a 2016 gear?
|
|
Author: | axaday | Posted: | May 1, 2022 17:39 | Subject: | Re: Copper to Reddish Gold | Viewed: | 31 times | Topic: | Catalog Requests | |
| In Catalog Requests, here4bricks614 writes:
| | | -----------------------------------------------------
|
| I believe all 48495s should be moved to Reddish Gold. As it stands, a buyer-seller
issue exists because Reddish Gold swords exist under ‘Reddish Gold’ and ‘Copper’.
A buyer would be incredibly confused to learn that both swords they purchased
were the exact same color, leading to potential bad reviews that are of no fault
of the seller. There’s enough evidence to suggest that this part does not exist
in Copper.
|
I have one of the copper sets on the way. I doubt I will be able to open the
castle, but it is possible I will be able to get the chess set.
|
|
Author: | SylvainLS | Posted: | May 1, 2022 17:20 | Subject: | Re: Piece identification #27964 | Viewed: | 39 times | Topic: | General | |
| In General, Stuart9 writes:
| Many parts used in an assembly have part numbers on them but they cannot be seen
unless the item is broken up.
|
Not “many,” all of them. They need to be identified.
Imagine at the factory:
“Hey, we want us to make a few of that neck part. Put the mould in machine 20.”
“Which neck part?”
“You know the one for the heads!”
“??”
| I mean broken not disassembled, hence they are not listed as seperate parts here.
|
|
|
Author: | axaday | Posted: | May 1, 2022 17:20 | Subject: | Re: Inventory Change Request for Set 9247-2 | Viewed: | 24 times | Topic: | Inventories Requests | |
| I am on my phone in the car headed home from Wichita. I should have pics from
opening this set last summer. I may have the bikes still also. I opened a bunch
of similar sets last summer and did not assemble bikes that didn’t Come that
way. I would like to think I would have made a request, but it is worth looking
at my records at home.
In Inventories Requests, randyipp writes:
| In Inventories Requests, TakeAbricK writes:
| In Inventories Requests, randyipp writes:
| In Inventories Requests, TakeAbricK writes:
|
ok, but did they come assembled in the box, or in un-assembled frames and wheels?
|
They were not assembled.
|
Assembled parts only come in inventories as regular items, when they also came
assembled in the box. Otherwise the assembled bicycles should be listed as counterparts.
|
But they have, just not this last time I parted out the sets. 9348-1 bicycles
have never been assembled as far as I can tell. I think Axaday also parted out
this set and had an assembled bicycle, but that is speculation.
|
This means the assembled bicycles already in the inventory should be changed
to counterpart.
The new assembled bicycles should be added as counterpart.
No Match-id's for counterparts.
The bicycle frames should be added as regular
The 2-piece wheels as regular
The 1-piece wheels as alternate
Both with the same Match-ID (first free one)
Do you want to try again?
Diana
|
If they have come both ways, which way takes precedence? I agree it would probably
make the most sense to switch them to counter part and have a match id on the
wheels only to be more in line with the rest of the sets.
|
|
|
Author: | Stuart9 | Posted: | May 1, 2022 17:05 | Subject: | Re: Piece identification #27964 | Viewed: | 39 times | Topic: | General | |
| Many parts used in an assembly have part numbers on them but they cannot be seen
unless the item is broken up.
I mean broken not disassembled, hence they are not listed as seperate parts here.
In General, KitKat53 writes:
| In General, taxan writes:
| In General, randyf writes:
| In General, KitKat53 writes:
| OK, I am still looking for help identifying this piece. I have searched the internet
as much as possible, and even contacted LEGO.com with no luck. It's been
over a year and I still don't know what this piece is, what set it might
go to, or what number to list it on BrickLink with! I have included pics of each
side of this piece in the hopes that someone here knows what it is.
Oh, and please!! If you don't know what it is, please don't reply like
the last time I asked. And yes, before anyone suggests it, I have searched the
color base, again with no luck considering there are thousands of BLACK pieces!!
|
I am inclined to believe that it is an internal component of one of the Star
Wars constraction figure heads:
https://www.bricklink.com/catalogListOld.asp?q=large%20figure%20head%20modified%20sw
Which one? I have no idea.
|
|
Could be. My question would be, if it's part of this assembly, WHY does it
have it's own part #, and if it's part of this head, why aren't the
individual parts listed. I asked the exact same question at LEGO.com and got
nothing.
|
Looks like you spot on here.
Look at the bottom of this head its a match. (It may be from any of the black
heads.)
|
|
|
|
Author: | KitKat53 | Posted: | May 1, 2022 16:59 | Subject: | Re: Piece identification #27964 | Viewed: | 48 times | Topic: | General | |
| In General, taxan writes:
| In General, randyf writes:
| In General, KitKat53 writes:
| OK, I am still looking for help identifying this piece. I have searched the internet
as much as possible, and even contacted LEGO.com with no luck. It's been
over a year and I still don't know what this piece is, what set it might
go to, or what number to list it on BrickLink with! I have included pics of each
side of this piece in the hopes that someone here knows what it is.
Oh, and please!! If you don't know what it is, please don't reply like
the last time I asked. And yes, before anyone suggests it, I have searched the
color base, again with no luck considering there are thousands of BLACK pieces!!
|
I am inclined to believe that it is an internal component of one of the Star
Wars constraction figure heads:
https://www.bricklink.com/catalogListOld.asp?q=large%20figure%20head%20modified%20sw
Which one? I have no idea.
|
|
Could be. My question would be, if it's part of this assembly, WHY does it
have it's own part #, and if it's part of this head, why aren't the
individual parts listed. I asked the exact same question at LEGO.com and got
nothing.
|
Looks like you spot on here.
Look at the bottom of this head its a match. (It may be from any of the black
heads.)
|
|
|
Author: | jbo210 | Posted: | May 1, 2022 16:50 | Subject: | ✨Star Wars Day Giveaway!✨ | Viewed: | 78 times | Topic: | Announce | |
| Hi everyone!
In celebration of Star Wars Day on May 4th, you have a chance to win a FREE brand
new ✨sw0396 Boba Fett✨ minifig!
All you have to do is place an order with the store from now through the end
of day on May 4th and you will be automatically entered to win. On May 5th, all
customers will be entered into an online name wheel spinner app and the winner
will be chosen at random! Cost of shipping will be completely covered as well!
Along with the giveaway:
⭐️All orders will still include a FREE bonus bag; Bonus bags are filled with
random extra parts and minifig accessories, included as big thank you for supporting
the store!
⭐️Flat rate shipping cost of $3.89 for all orders under 16 oz!
Thank you for your time and "May the fourth" be with you!
AlamoCityMinifigs
https://store.bricklink.com/jbo210
|
|
|
Author: | Turez | Posted: | May 1, 2022 16:26 | Subject: | Re: Inventory Change Request for Set 9247-2 | Viewed: | 30 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyipp writes:
| Please make changes to the following inventory:
* Add 3 Part 4719c02 Red Bicycle (1-Piece Wheels) (Alternate) (match ID 4)
* Change 3 Part Red 4719c01 Bicycle (2-Piece Wheels) {match ID 0 to 4}
Comments from Submitter:
From sealed sets (trying again)
|
Are there any 4-digit batch codes on the sides of the boxes?
(Examples: https://www.bricklink.com/message.asp?ID=1142823 )
And to summarize this, in set 9247-2 you found (this time and/or last year)
not assembled and
assembled, yes?
And also 4719c02 assembled?
|
|
Author: | spendloa | Posted: | May 1, 2022 16:23 | Subject: | 10% off | Viewed: | 34 times | Topic: | Sales | |
| 10% off everything till midnight 1/5/2022 |
Author: | StarBrick | Posted: | May 1, 2022 16:14 | Subject: | Future date for orders in the past...? | Viewed: | 126 times | Topic: | Technical Issues | |
| As I was searching through a shop, I wondered when the last order I placed here
was made.
So I checked.
And saw.... an order with a date, yet to come on the calendar (check picture!).
What happened in the database???
|
|
|
Author: | brac.brick | Posted: | May 1, 2022 16:03 | Subject: | Re: Buyer purchases then asks for extra parts | Viewed: | 61 times | Topic: | Problem | |
| In Problem, peregrinator writes:
| In Problem, brac.brick writes:
| I like the idea- do you do this for orders of low values - like less than 1$
?
|
In that case I would probably just include the extra parts for free, if the buyer
spent a good amount on the first order.
|
Yes, I decide on a case by case basis -and it all depends on what the buyer is
looking for; value of the parts. I just need a more consistent way to handle
these requests . I'm not going to deal with Paypal fees for an extra $0.25
cents . Thanks for all the ideas .
|
|
Author: | Stuart9 | Posted: | May 1, 2022 15:42 | Subject: | Re: Piece identification #27964 | Viewed: | 42 times | Topic: | General | |
| Looks like it.
In General, taxan writes:
| In General, randyf writes:
| In General, KitKat53 writes:
| OK, I am still looking for help identifying this piece. I have searched the internet
as much as possible, and even contacted LEGO.com with no luck. It's been
over a year and I still don't know what this piece is, what set it might
go to, or what number to list it on BrickLink with! I have included pics of each
side of this piece in the hopes that someone here knows what it is.
Oh, and please!! If you don't know what it is, please don't reply like
the last time I asked. And yes, before anyone suggests it, I have searched the
color base, again with no luck considering there are thousands of BLACK pieces!!
|
I am inclined to believe that it is an internal component of one of the Star
Wars constraction figure heads:
https://www.bricklink.com/catalogListOld.asp?q=large%20figure%20head%20modified%20sw
Which one? I have no idea.
|
Looks like you spot on here.
Look at the bottom of this head its a match. (It may be from any of the black
heads.)
|
|
|
Author: | SylvainLS | Posted: | May 1, 2022 15:37 | Subject: | Re: "Only one item/color combination is allowed" | Viewed: | 39 times | Topic: | Technical Issues | |
| In Technical Issues, brum_blue writes:
| […]
Actually, when I went to look at all my lists (and scanned several of them item
by item), I eventually noticed that one list had a comment under it saying "Contains
duplicate item/color combinations". Easy to fix after finding that out!
|
Oh, great. It seems new (or no one noticed it before ). It’ll be useful.
|
|
Author: | brum_blue | Posted: | May 1, 2022 15:26 | Subject: | Re: "Only one item/color combination is allowed" | Viewed: | 31 times | Topic: | Technical Issues | |
| In Technical Issues, SylvainLS writes:
| In Technical Issues, brum_blue writes:
| […]
Is there any good way to discover which part is causing this? It has happened
to me, out of the blue. I have only ever used BL itself to edit wish lists -
no imports.
I have lots of lists with hundreds of items on them.
Any way to diagnose it other than to look at every part on every list and
presumably I would see two of the same item/colour?
|
I don’t think there’s a simple way
Whatever sort order you use, the duplicates should be next to each other… but
you still have to go through all the items.
|
Actually, when I went to look at all my lists (and scanned several of them item
by item), I eventually noticed that one list had a comment under it saying "Contains
duplicate item/color combinations". Easy to fix after finding that out!
|
|
Author: | taxan | Posted: | May 1, 2022 15:21 | Subject: | Re: Piece identification #27964 | Viewed: | 45 times | Topic: | General | |
| In General, randyf writes:
| In General, KitKat53 writes:
| OK, I am still looking for help identifying this piece. I have searched the internet
as much as possible, and even contacted LEGO.com with no luck. It's been
over a year and I still don't know what this piece is, what set it might
go to, or what number to list it on BrickLink with! I have included pics of each
side of this piece in the hopes that someone here knows what it is.
Oh, and please!! If you don't know what it is, please don't reply like
the last time I asked. And yes, before anyone suggests it, I have searched the
color base, again with no luck considering there are thousands of BLACK pieces!!
|
I am inclined to believe that it is an internal component of one of the Star
Wars constraction figure heads:
https://www.bricklink.com/catalogListOld.asp?q=large%20figure%20head%20modified%20sw
Which one? I have no idea.
|
Looks like you spot on here.
Look at the bottom of this head its a match. (It may be from any of the black
heads.)
|
|
Author: | randyf | Posted: | May 1, 2022 15:21 | Subject: | Re: Inventory Change Request for Set 9247-2 | Viewed: | 19 times | Topic: | Inventories Requests | |
| In Inventories Requests, here4bricks614 writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, here4bricks614 writes:
| In Inventories Requests, randyipp writes:
| In Inventories Requests, here4bricks614 writes:
|
Can you spot a 7-digit number anywhere near the barcodes? Are either of them
4598355?
|
That exact number was not on any of the boxes.
There was an interesting find through, 3 of the 10 did not have this 118789 number
underneath the barcode. Not sure what that gets us but it is something. The
rest of the numbers on each box matched exactly.
|
'4291790' is the set's ID. The 4563665 on the box flap suggests that
these are all the 2011 edition of this '2006' set. That is, if that 4563665
number means anything. I find it highly unlikely that a number reminiscent of
an item ID would be on a box flap for no reason. These may be from 2011.
|
That is the item number for the set box.
|
Why would they be so far apart though? Could it be that later versions had a
box ID added?
|
Something else on the box changed over the time period. The set still had the
same item number, but something about the box was different. It could have had
a small change to the graphics, different material supplier, different cardboard
weight, etc. Whatever the reason, it was considered significant enough to have
a unique SAP number assigned to it.
|
|
Author: | randyf | Posted: | May 1, 2022 15:13 | Subject: | Re: Piece identification #27964 | Viewed: | 39 times | Topic: | General | |
| In General, KitKat53 writes:
| OK, I am still looking for help identifying this piece. I have searched the internet
as much as possible, and even contacted LEGO.com with no luck. It's been
over a year and I still don't know what this piece is, what set it might
go to, or what number to list it on BrickLink with! I have included pics of each
side of this piece in the hopes that someone here knows what it is.
Oh, and please!! If you don't know what it is, please don't reply like
the last time I asked. And yes, before anyone suggests it, I have searched the
color base, again with no luck considering there are thousands of BLACK pieces!!
|
I am inclined to believe that it is an internal component of one of the Star
Wars constraction figure heads:
https://www.bricklink.com/catalogListOld.asp?q=large%20figure%20head%20modified%20sw
Which one? I have no idea.
|
|
Author: | SylvainLS | Posted: | May 1, 2022 15:10 | Subject: | Re: "Only one item/color combination is allowed" | Viewed: | 26 times | Topic: | Technical Issues | |
| In Technical Issues, brum_blue writes:
| […]
Is there any good way to discover which part is causing this? It has happened
to me, out of the blue. I have only ever used BL itself to edit wish lists -
no imports.
I have lots of lists with hundreds of items on them.
Any way to diagnose it other than to look at every part on every list and
presumably I would see two of the same item/colour?
|
I don’t think there’s a simple way
Whatever sort order you use, the duplicates should be next to each other… but
you still have to go through all the items.
|
|
Author: | jgrossman1025 | Posted: | May 1, 2022 15:00 | Subject: | 10% off sale (Actual Sale!!!) :) | Viewed: | 57 times | Topic: | Sales | |
| Hello,
I am running a 10% off sale in my store on everything that is available in order
to generate some funds, as I have spent alot of my lego funds this May the 4th.
Take a look, lots of great pieces, figures, parts, and sets, all at great prices.
Fell free to message me about any questions, or about buying in bulk and getting
a better deal.
Thanks for reading, NG
|
|
Author: | brum_blue | Posted: | May 1, 2022 15:00 | Subject: | Re: "Only one item/color combination is allowed" | Viewed: | 30 times | Topic: | Technical Issues | |
| In Technical Issues, JasterMereel11 writes:
| All morning I have noticed that I cannot edit any wanted list that I have anymore
and constantly get an error saying "Only one item/color combination is allowed
per Wanted List" Has anyone else run into this or know of a fix?
|
Is there any good way to discover which part is causing this? It has happened
to me, out of the blue. I have only ever used BL itself to edit wish lists -
no imports.
I have lots of lists with hundreds of items on them.
Any way to diagnose it other than to look at every part on every list and
presumably I would see two of the same item/colour?
|
Author: | HelloFromEarth | Posted: | May 1, 2022 14:58 | Subject: | Free Shipping on Orders 75 dollars or more | Viewed: | 60 times | Topic: | Sales | |
| I love free shipping. I'm sure you do to! |
|
Author: | here4bricks614 | Posted: | May 1, 2022 14:57 | Subject: | Re: Inventory Change Request for Set 9247-2 | Viewed: | 20 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| In Inventories Requests, here4bricks614 writes:
| In Inventories Requests, randyipp writes:
| In Inventories Requests, here4bricks614 writes:
|
Can you spot a 7-digit number anywhere near the barcodes? Are either of them
4598355?
|
That exact number was not on any of the boxes.
There was an interesting find through, 3 of the 10 did not have this 118789 number
underneath the barcode. Not sure what that gets us but it is something. The
rest of the numbers on each box matched exactly.
|
'4291790' is the set's ID. The 4563665 on the box flap suggests that
these are all the 2011 edition of this '2006' set. That is, if that 4563665
number means anything. I find it highly unlikely that a number reminiscent of
an item ID would be on a box flap for no reason. These may be from 2011.
|
That is the item number for the set box.
|
Why would they be so far apart though? Could it be that later versions had a
box ID added?
|
|
Author: | randyf | Posted: | May 1, 2022 14:55 | Subject: | Re: Inventory Change Request for Set 9247-2 | Viewed: | 19 times | Topic: | Inventories Requests | |
| In Inventories Requests, here4bricks614 writes:
| In Inventories Requests, randyipp writes:
| In Inventories Requests, here4bricks614 writes:
|
Can you spot a 7-digit number anywhere near the barcodes? Are either of them
4598355?
|
That exact number was not on any of the boxes.
There was an interesting find through, 3 of the 10 did not have this 118789 number
underneath the barcode. Not sure what that gets us but it is something. The
rest of the numbers on each box matched exactly.
|
'4291790' is the set's ID. The 4563665 on the box flap suggests that
these are all the 2011 edition of this '2006' set. That is, if that 4563665
number means anything. I find it highly unlikely that a number reminiscent of
an item ID would be on a box flap for no reason. These may be from 2011.
|
That is the item number for the set box.
|
|
Author: | SylvainLS | Posted: | May 1, 2022 14:54 | Subject: | Re: Part description wrong? | Viewed: | 26 times | Topic: | Catalog Identification | |
| In Catalog Identification, tpr writes:
| […]
| | 4x4x2 is correct, if you look at it the right way
|
I thought height was in bricks
|
I was thinking that...
Also if your picture is correct for shape etc, the pictures in the catalogue
are mis-leading - but i suppose any piece can be in any orientation !!
|
Yep. Some pieces have a “natural”¹ orientation (studs up…) but not all.
For bricks, it’s easy to find a “up”/height, and it’s logical¹ to use brick as
a unit because they are in multiple of plates/bricks.
For Technic Liftarms & Panels, Bionicle, etc., it’s not easy to define a “up,”
and it’s weird¹ to say 1 2/3 bricks when you’ll generally be using 2 modules
(other Technic parts, like pins or beams) in that axis, not plates & bricks.
¹ Yes, I’m flirting with the “call to nature” fallacy but, well, some measures
lends themselves more easily to some units. (And, yes, that seems inconsistent
with my stance on imperial units but I know what studs & bricks are, while I
rarely have a horse or salted ice at hand )
|
|
Author: | here4bricks614 | Posted: | May 1, 2022 14:49 | Subject: | Re: Inventory Change Request for Set 4663-1 | Viewed: | 20 times | Topic: | Inventories Requests | |
| In Inventories Requests, WoutR writes:
| In Inventories Requests, here4bricks614 writes:
| In Inventories Requests, WoutR writes:
| In Inventories Requests, TakeAbricK writes:
| In Inventories Requests, here4bricks614 writes:
| In Inventories Requests, here4bricks614 writes:
| Please make changes to the following inventory:
* Change 1 Part {Purple to Magenta} 6510 Duplo, Plant Flower with Stud
* Change 1 Part {Dark Purple to Medium Violet} 6510 Duplo, Plant Flower with Stud
Comments from Submitter:
Wouter and I have confirmed that part 6510 exists in TLG 219 Lilac, which is under BL Medium Violet and this is the only possible source. No evidence exists to suggest that this flower appeared in Dark Purple. Will attach photo of listing.
|
|
Still had some images waiting for me to add to the other post. I already was
convinced that the dark purple should be Medium Violet. Still had doubts about
Magenta or Light Purple though. But you convinced me now
Diana
|
For future reference, I think that the set contains 6510 in Lilac. That colour
is conflated with tWo other colours in Bricklink's Medium Violet.
https://img.bricklink.com/ItemImage/EXTN/48979.png
|
I was about to suggest that this set should have a note attached to it, as should
other sets with Lilac parts. I believe this color appeared in five sets + a promo
brick,
|
Good idea.
|
Have you checked your capes? The 2004 cape should be Lilac. Any earlier 'Violet'
cape is just TLG 110, but they do look VERY similar.
Lilac appears in sets 4663, 4679b-2, 4751, 7496, and 7917. The fourth has a note.
|
|
Author: | WoutR | Posted: | May 1, 2022 14:42 | Subject: | Re: Inventory Change Request for Set 4663-1 | Viewed: | 16 times | Topic: | Inventories Requests | |
| In Inventories Requests, here4bricks614 writes:
| In Inventories Requests, WoutR writes:
| In Inventories Requests, TakeAbricK writes:
| In Inventories Requests, here4bricks614 writes:
| In Inventories Requests, here4bricks614 writes:
| Please make changes to the following inventory:
* Change 1 Part {Purple to Magenta} 6510 Duplo, Plant Flower with Stud
* Change 1 Part {Dark Purple to Medium Violet} 6510 Duplo, Plant Flower with Stud
Comments from Submitter:
Wouter and I have confirmed that part 6510 exists in TLG 219 Lilac, which is under BL Medium Violet and this is the only possible source. No evidence exists to suggest that this flower appeared in Dark Purple. Will attach photo of listing.
|
|
Still had some images waiting for me to add to the other post. I already was
convinced that the dark purple should be Medium Violet. Still had doubts about
Magenta or Light Purple though. But you convinced me now
Diana
|
For future reference, I think that the set contains 6510 in Lilac. That colour
is conflated with tWo other colours in Bricklink's Medium Violet.
https://img.bricklink.com/ItemImage/EXTN/48979.png
|
I was about to suggest that this set should have a note attached to it, as should
other sets with Lilac parts. I believe this color appeared in five sets + a promo
brick,
|
Good idea.
|
|
Author: | here4bricks614 | Posted: | May 1, 2022 14:41 | Subject: | Re: Inventory Change Request for Set 4663-1 | Viewed: | 19 times | Topic: | Inventories Requests | |
| In Inventories Requests, WoutR writes:
| In Inventories Requests, TakeAbricK writes:
| In Inventories Requests, here4bricks614 writes:
| In Inventories Requests, here4bricks614 writes:
| Please make changes to the following inventory:
* Change 1 Part {Purple to Magenta} 6510 Duplo, Plant Flower with Stud
* Change 1 Part {Dark Purple to Medium Violet} 6510 Duplo, Plant Flower with Stud
Comments from Submitter:
Wouter and I have confirmed that part 6510 exists in TLG 219 Lilac, which is under BL Medium Violet and this is the only possible source. No evidence exists to suggest that this flower appeared in Dark Purple. Will attach photo of listing.
|
|
Still had some images waiting for me to add to the other post. I already was
convinced that the dark purple should be Medium Violet. Still had doubts about
Magenta or Light Purple though. But you convinced me now
Diana
|
For future reference, I think that the set contains 6510 in Lilac. That colour
is conflated with to other colours in Bricklink's Medium Violet.
https://img.bricklink.com/ItemImage/EXTN/48979.png
|
I was about to suggest that this set should have a note attached to it, as should
other sets with Lilac parts. I believe this color appeared in five sets + a promo
brick,
|
|
Author: | peregrinator | Posted: | May 1, 2022 14:41 | Subject: | Re: Buyer purchases then asks for extra parts | Viewed: | 39 times | Topic: | Problem | |
| In Problem, brac.brick writes:
| I like the idea- do you do this for orders of low values - like less than 1$
?
|
In that case I would probably just include the extra parts for free, if the buyer
spent a good amount on the first order.
|
|
Author: | WoutR | Posted: | May 1, 2022 14:37 | Subject: | Re: Inventory Change Request for Set 4663-1 | Viewed: | 20 times | Topic: | Inventories Requests | |
| In Inventories Requests, TakeAbricK writes:
| In Inventories Requests, here4bricks614 writes:
| In Inventories Requests, here4bricks614 writes:
| Please make changes to the following inventory:
* Change 1 Part {Purple to Magenta} 6510 Duplo, Plant Flower with Stud
* Change 1 Part {Dark Purple to Medium Violet} 6510 Duplo, Plant Flower with Stud
Comments from Submitter:
Wouter and I have confirmed that part 6510 exists in TLG 219 Lilac, which is under BL Medium Violet and this is the only possible source. No evidence exists to suggest that this flower appeared in Dark Purple. Will attach photo of listing.
|
|
Still had some images waiting for me to add to the other post. I already was
convinced that the dark purple should be Medium Violet. Still had doubts about
Magenta or Light Purple though. But you convinced me now
Diana
|
For future reference, I think that the set contains 6510 in Lilac. That colour
is conflated with to other colours in Bricklink's Medium Violet.
https://img.bricklink.com/ItemImage/EXTN/48979.png
|
|
Author: | Stellar | Posted: | May 1, 2022 14:36 | Subject: | Re: Inventory Change Request for Set 9247-2 | Viewed: | 22 times | Topic: | Inventories Requests | |
| In Inventories Requests, here4bricks614 writes:
| In Inventories Requests, randyipp writes:
| In Inventories Requests, here4bricks614 writes:
|
Can you spot a 7-digit number anywhere near the barcodes? Are either of them
4598355?
|
That exact number was not on any of the boxes.
There was an interesting find through, 3 of the 10 did not have this 118789 number
underneath the barcode. Not sure what that gets us but it is something. The
rest of the numbers on each box matched exactly.
|
'4291790' is the set's ID. The 4563665 on the box flap suggests that
these are all the 2011 edition of this '2006' set. That is, if that 4563665
number means anything. I find it highly unlikely that a number reminiscent of
an item ID would be on a box flap for no reason. These may be from 2011.
|
I think it is the item ID of the empty box per se.
|
|
Author: | here4bricks614 | Posted: | May 1, 2022 14:36 | Subject: | Re: Inventory Change Request for Set 4663-1 | Viewed: | 18 times | Topic: | Inventories Requests | |
| In Inventories Requests, TakeAbricK writes:
| In Inventories Requests, here4bricks614 writes:
| In Inventories Requests, here4bricks614 writes:
| Please make changes to the following inventory:
* Change 1 Part {Purple to Magenta} 6510 Duplo, Plant Flower with Stud
* Change 1 Part {Dark Purple to Medium Violet} 6510 Duplo, Plant Flower with Stud
Comments from Submitter:
Wouter and I have confirmed that part 6510 exists in TLG 219 Lilac, which is under BL Medium Violet and this is the only possible source. No evidence exists to suggest that this flower appeared in Dark Purple. Will attach photo of listing.
|
|
Still had some images waiting for me to add to the other post. I already was
convinced that the dark purple should be Medium Violet. Still had doubts about
Magenta or Light Purple though. But you convinced me now
Diana
|
Great! All that's left now is to move the Light Green flowers and to add
the Trans-Green flower. That should finish this part for good.
|
|
Author: | randyipp | Posted: | May 1, 2022 14:35 | Subject: | Re: Inventory Change Request for Set 9247-2 | Viewed: | 21 times | Topic: | Inventories Requests | |
| In Inventories Requests, TakeAbricK writes:
| In Inventories Requests, randyipp writes:
| In Inventories Requests, TakeAbricK writes:
|
ok, but did they come assembled in the box, or in un-assembled frames and wheels?
|
They were not assembled.
|
Assembled parts only come in inventories as regular items, when they also came
assembled in the box. Otherwise the assembled bicycles should be listed as counterparts.
|
But they have, just not this last time I parted out the sets. 9348-1 bicycles
have never been assembled as far as I can tell. I think Axaday also parted out
this set and had an assembled bicycle, but that is speculation.
|
This means the assembled bicycles already in the inventory should be changed
to counterpart.
The new assembled bicycles should be added as counterpart.
No Match-id's for counterparts.
The bicycle frames should be added as regular
The 2-piece wheels as regular
The 1-piece wheels as alternate
Both with the same Match-ID (first free one)
Do you want to try again?
Diana
|
If they have come both ways, which way takes precedence? I agree it would probably
make the most sense to switch them to counter part and have a match id on the
wheels only to be more in line with the rest of the sets.
|
|
Author: | TakeAbricK | Posted: | May 1, 2022 14:35 | Subject: | Re: Inventory Change Request for Set 7586-1 | Viewed: | 22 times | Topic: | Inventories Requests | |
| In Inventories Requests, here4bricks614 writes:
| Please make changes to the following inventory:
* Delete 1 Part 3852b Bright Light Orange Minifigure, Utensil Hairbrush - 10mm Handle (Alternate) (match ID 3)
* Delete 1 Part 6186 Bright Light Orange Teddy Bear, Belville / Scala (Alternate) (match ID 4)
* Change 1 Part {Medium Orange to (Not Applicable)} x248pb01 Belville Cloth Blanket 4 x 5 with Red Spots Pattern
* Change 1 Part {Medium Orange to Bright Light Orange} 3852b Minifigure, Utensil Hairbrush - 10mm Handle {match ID 3 to 0}
* Change 1 Part {Medium Orange to Bright Light Orange} 6186 Teddy Bear, Belville / Scala {match ID 4 to 0}
* Change 1 Part {Purple to Dark Purple} belvdress04 Belville, Clothes Dress (Adult) Sleeveless Net Top, White Skirt with Purple Dots Pattern
Comments from Submitter:
This blanket does not match any known color and should just be N/A.
It has been established now that this brush does not exist in Medium Orange, and there would have been no reason for LEGO to make a part in a color that had been retired for quite some time. This was more than likely just a mistake on behalf of the person who first inventoried this set.
|
Agree, ordered this brush many times in the past, always received bright light
orange.
|
The bear is likely also just a mistake. The Bright Light Orange alternates were added later on and were assumed to be alternates. Other Belville sets from 2007 were also edited to remove these Medium Orange bears. No evidence exists to suggest that these ever appeared in sets as late as 2008.
Purple should not have been used to make new parts after 2003. This dress is more of a Dark Purple.
Deleting the alternates and changing the colors of the main inventory parts.
|
|
|
Author: | Stellar | Posted: | May 1, 2022 14:34 | Subject: | Re: Combining orders | Viewed: | 31 times | Topic: | Buying | |
| In Buying, wildchicken13 writes:
| In Buying, amvdamian writes:
| There have been several occasions when I had to place a second order just after
placing one at a store. Sometimes, the system would create a second 'batch'
order and combine it with the first one. The second invoice would usually have
a price + shipping marked as 'TBD'.
At some shops however, the system just creates a second order and charges a new
shipping fee outright.
Are the above preferences set by the store owner?
|
Yes.
Another consideration is instant checkout. If a seller has IC enabled, then BL
will usually create a separate order rather than a second batch. I'm not
sure that ordering in multiple batches is even possible with IC.
|
IC has nothing to do, it all depends if the order is Paid Onsite or marked as
paid, and if not, then if the seller changed the status to packed.
|
|
Author: | here4bricks614 | Posted: | May 1, 2022 14:32 | Subject: | Re: Inventory Change Request for Set 9247-2 | Viewed: | 21 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyipp writes:
| In Inventories Requests, here4bricks614 writes:
|
Can you spot a 7-digit number anywhere near the barcodes? Are either of them
4598355?
|
That exact number was not on any of the boxes.
There was an interesting find through, 3 of the 10 did not have this 118789 number
underneath the barcode. Not sure what that gets us but it is something. The
rest of the numbers on each box matched exactly.
|
'4291790' is the set's ID. The 4563665 on the box flap suggests that
these are all the 2011 edition of this '2006' set. That is, if that 4563665
number means anything. I find it highly unlikely that a number reminiscent of
an item ID would be on a box flap for no reason. These may be from 2011.
|
|
Author: | WoutR | Posted: | May 1, 2022 14:32 | Subject: | Re: Piece identification #27964 | Viewed: | 39 times | Topic: | General | |
| In General, KitKat53 writes:
| OK, I am still looking for help identifying this piece. I have searched the internet
as much as possible, and even contacted LEGO.com with no luck. It's been
over a year and I still don't know what this piece is, what set it might
go to, or what number to list it on BrickLink with! I have included pics of each
side of this piece in the hopes that someone here knows what it is.
Oh, and please!! If you don't know what it is, please don't reply like
the last time I asked. And yes, before anyone suggests it, I have searched the
color base, again with no luck considering there are thousands of BLACK pieces!!
|
It reminds me of Hero factory/constraction parts...
|
|
Author: | wildchicken13 | Posted: | May 1, 2022 14:30 | Subject: | Re: Combining orders | Viewed: | 26 times | Topic: | Buying | |
| In Buying, amvdamian writes:
| There have been several occasions when I had to place a second order just after
placing one at a store. Sometimes, the system would create a second 'batch'
order and combine it with the first one. The second invoice would usually have
a price + shipping marked as 'TBD'.
At some shops however, the system just creates a second order and charges a new
shipping fee outright.
Are the above preferences set by the store owner?
|
Yes.
Another consideration is instant checkout. If a seller has IC enabled, then BL
will usually create a separate order rather than a second batch. I'm not
sure that ordering in multiple batches is even possible with IC.
|
|
Author: | TakeAbricK | Posted: | May 1, 2022 14:28 | Subject: | Re: Inventory Change Request for Set 4663-1 | Viewed: | 20 times | Topic: | Inventories Requests | |
| In Inventories Requests, here4bricks614 writes:
| In Inventories Requests, here4bricks614 writes:
| Please make changes to the following inventory:
* Change 1 Part {Purple to Magenta} 6510 Duplo, Plant Flower with Stud
* Change 1 Part {Dark Purple to Medium Violet} 6510 Duplo, Plant Flower with Stud
Comments from Submitter:
Wouter and I have confirmed that part 6510 exists in TLG 219 Lilac, which is under BL Medium Violet and this is the only possible source. No evidence exists to suggest that this flower appeared in Dark Purple. Will attach photo of listing.
|
|
Still had some images waiting for me to add to the other post. I already was
convinced that the dark purple should be Medium Violet. Still had doubts about
Magenta or Light Purple though. But you convinced me now
Diana
|
|
Author: | jennnifer | Posted: | May 1, 2022 14:27 | Subject: | Fedex ... you missed | Viewed: | 173 times | Topic: | Shipping | |
| I am used to this sort of thing from the USPS, but this is the first from Fedex.
I live about an hour from the LEGO distribution center in Romeoville. My package
is now supposed to arrive on Tuesday after having a little vacation in Utah.
|
|
|
Author: | TakeAbricK | Posted: | May 1, 2022 14:22 | Subject: | Re: Inventory Change Request for Set 9247-2 | Viewed: | 18 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyipp writes:
| In Inventories Requests, TakeAbricK writes:
|
ok, but did they come assembled in the box, or in un-assembled frames and wheels?
|
They were not assembled.
|
Assembled parts only come in inventories as regular items, when they also came
assembled in the box. Otherwise the assembled bicycles should be listed as counterparts.
This means the assembled bicycles already in the inventory should be changed
to counterpart.
The new assembled bicycles should be added as counterpart.
No Match-id's for counterparts.
The bicycle frames should be added as regular
The 2-piece wheels as regular
The 1-piece wheels as alternate
Both with the same Match-ID (first free one)
Do you want to try again?
Diana
|
|
Author: | randyipp | Posted: | May 1, 2022 14:12 | Subject: | Re: Piece identification #27964 | Viewed: | 39 times | Topic: | General | |
| In General, KitKat53 writes:
| OK, I am still looking for help identifying this piece. I have searched the internet
as much as possible, and even contacted LEGO.com with no luck. It's been
over a year and I still don't know what this piece is, what set it might
go to, or what number to list it on BrickLink with! I have included pics of each
side of this piece in the hopes that someone here knows what it is.
Oh, and please!! If you don't know what it is, please don't reply like
the last time I asked. And yes, before anyone suggests it, I have searched the
color base, again with no luck considering there are thousands of BLACK pieces!!
|
Huh, never seen it.
|
|
Author: | amvdamian | Posted: | May 1, 2022 14:11 | Subject: | Combining orders | Viewed: | 72 times | Topic: | Buying | |
| There have been several occasions when I had to place a second order just after
placing one at a store. Sometimes, the system would create a second 'batch'
order and combine it with the first one. The second invoice would usually have
a price + shipping marked as 'TBD'.
At some shops however, the system just creates a second order and charges a new
shipping fee outright.
Are the above preferences set by the store owner?
|
|
Author: | tpr | Posted: | May 1, 2022 14:10 | Subject: | Re: Part description wrong? | Viewed: | 19 times | Topic: | Catalog Identification | |
| In Catalog Identification, Stellar writes:
| In Catalog Identification, SylvainLS writes:
| In Catalog Identification, TakeAbricK writes:
| In Catalog Identification, tpr writes:
| Hi
Description says its 4x4x2
Looks more like 4x2x2
Any admin have one to check
tpr
|
I don't have it, but it looks more like 5 x 3 x 3?
Looking at the images on stud plate.
Diana
|
4x4x2 is correct, if you look at it the right way
|
I thought height was in bricks
|
I was thinking that...
Also if your picture is correct for shape etc, the pictures in the catalogue
are mis-leading - but i suppose any piece can be in any orientation !!
|
|
Author: | Stellar | Posted: | May 1, 2022 14:08 | Subject: | Re: Does Processing status allow Payment? | Viewed: | 18 times | Topic: | Selling | |
| In Selling, Shiny_Stuff writes:
| Dumb Question Time:
As a seller, can I set an order at PROCESSING, send the Invoice, and receive
payment under that status ???
Sometimes when I receive a complicated order, I do prefer to send the Invoice
BEFORE I have picked and packed the order and set it to READY.
This was never a problem before On-Site Payment. Now, I am not so sure.
Thanks for your helpful answers.
____
|
Order status doesn't matter for payment, it depends if the order is invoiced
or not.
|
|
Author: | Stellar | Posted: | May 1, 2022 14:07 | Subject: | Re: Part description wrong? | Viewed: | 14 times | Topic: | Catalog Identification | |
| In Catalog Identification, SylvainLS writes:
| In Catalog Identification, TakeAbricK writes:
| In Catalog Identification, tpr writes:
| Hi
Description says its 4x4x2
Looks more like 4x2x2
Any admin have one to check
tpr
|
I don't have it, but it looks more like 5 x 3 x 3?
Looking at the images on stud plate.
Diana
|
4x4x2 is correct, if you look at it the right way
|
I thought height was in bricks
|
|
Author: | SylvainLS | Posted: | May 1, 2022 13:44 | Subject: | Re: Installed Studio 2 -- | Viewed: | 21 times | Topic: | Related Software | |
| In Problem, rjsherman1 writes:
| I installed Studio 2.0 today and when launched I get a "checking database 10/100"
nothing appears to happen after that -- how long does this take?
|
Hi,
It should be mostly unnoticeable.
Are you preventing Studio from talking to the servers to check for parts update?
Otherwise, the dedicated forum for Studio and PartDesigner is https://forum.bricklink.com/
(hover over the red Studio icon on every page, then click “Studio Forum”).
Please search the forum for your question before posting a new one (the search
box is in the very dark grey banner).
There’s indexes of known bugs and suggestions that you can browse first:
Studio: https://forum.bricklink.com/viewtopic.php?f=4&t=5579
PartDesigner: https://forum.bricklink.com/viewtopic.php?f=10&t=5589
|
|
Author: | FantasyBricks | Posted: | May 1, 2022 13:43 | Subject: | Re: Installed Studio 2 -- | Viewed: | 16 times | Topic: | Related Software | |
| Hello -- Please use this dedicated Studio forum for Studio-related questions:
https://forum.bricklink.com/index.php?sid=3e81358568da2d57a71ef5a97a5e56d1
You may also access the forum using the red Studio icon located to the right
of the green Market icon at the top of the main Bricklink page.
You will have better luck getting an answer there -- Thank you and good luck.
|
Author: | SylvainLS | Posted: | May 1, 2022 13:40 | Subject: | Re: Part description wrong? | Viewed: | 21 times | Topic: | Catalog Identification | |
| In Catalog Identification, TakeAbricK writes:
| In Catalog Identification, tpr writes:
| Hi
Description says its 4x4x2
Looks more like 4x2x2
Any admin have one to check
tpr
|
I don't have it, but it looks more like 5 x 3 x 3?
Looking at the images on stud plate.
Diana
|
4x4x2 is correct, if you look at it the right way
|
|
|
Author: | here4bricks614 | Posted: | May 1, 2022 13:38 | Subject: | Re: Piece identification #27964 | Viewed: | 38 times | Topic: | General | |
| In General, Stuart9 writes:
| Looks like part of an assembly if that helps anyone identify it, can’t place
it myself.
I’ll keep digging.
In General, KitKat53 writes:
| OK, I am still looking for help identifying this piece. I have searched the internet
as much as possible, and even contacted LEGO.com with no luck. It's been
over a year and I still don't know what this piece is, what set it might
go to, or what number to list it on BrickLink with! I have included pics of each
side of this piece in the hopes that someone here knows what it is.
Oh, and please!! If you don't know what it is, please don't reply like
the last time I asked. And yes, before anyone suggests it, I have searched the
color base, again with no luck considering there are thousands of BLACK pieces!!
|
|
The design ID suggests that it is part of an assembly that was produced around
2016. That should help narrow the search down a bit.
|
|
Author: | Stuart9 | Posted: | May 1, 2022 13:35 | Subject: | Re: Piece identification #27964 | Viewed: | 34 times | Topic: | General | |
| Looks like part of an assembly if that helps anyone identify it, can’t place
it myself.
I’ll keep digging.
In General, KitKat53 writes:
| OK, I am still looking for help identifying this piece. I have searched the internet
as much as possible, and even contacted LEGO.com with no luck. It's been
over a year and I still don't know what this piece is, what set it might
go to, or what number to list it on BrickLink with! I have included pics of each
side of this piece in the hopes that someone here knows what it is.
Oh, and please!! If you don't know what it is, please don't reply like
the last time I asked. And yes, before anyone suggests it, I have searched the
color base, again with no luck considering there are thousands of BLACK pieces!!
|
|
|
Author: | Taz21 | Posted: | May 1, 2022 13:32 | Subject: | 10 percent off all Minifigures | Viewed: | 33 times | Topic: | Sales | |
| Today only 30 percent off all build parts in addition 10 percent off all Minifigures
hurry up get a deal while you can
|
Author: | Taz21 | Posted: | May 1, 2022 13:31 | Subject: | 10 percent off all Minifigures | Viewed: | 21 times | Topic: | Sales | |
| Today only 30 percent off all build parts in addition 10 percent off all Minifigures
hurry up get a deal while you can
|
Author: | 1001bricks | Posted: | May 1, 2022 13:29 | Subject: | Re: Does Processing status allow Payment? | Viewed: | 22 times | Topic: | Selling | |
| | Sometimes when I receive a complicated order, I do prefer to send the Invoice
BEFORE I have picked and packed the order and set it to READY.
|
If that can help...
Since 2006 I send the Invoice - or use Auto Checkout - always BEFORE picking.
From time to time, you may encounter and glitch in your calculation and lose
a dollar or a couple; but that's FAR better than processing orders for free
and eventually put them back in stock if cancelled
|
Author: | snarf1974 | Posted: | May 1, 2022 13:27 | Subject: | May Sale 25% off | Viewed: | 73 times | Topic: | Sales | |
| Hello,
Month long sale with 25% off all minifigures
|
Author: | rjsherman1 | Posted: | May 1, 2022 13:26 | Subject: | Installed Studio 2 -- | Viewed: | 43 times | Topic: | Related Software | |
| I installed Studio 2.0 today and when launched I get a "checking database 10/100"
nothing appears to happen after that -- how long does this take?
|
Author: | KitKat53 | Posted: | May 1, 2022 13:12 | Subject: | Piece identification #27964 | Viewed: | 106 times | Topic: | General | |
| OK, I am still looking for help identifying this piece. I have searched the internet
as much as possible, and even contacted LEGO.com with no luck. It's been
over a year and I still don't know what this piece is, what set it might
go to, or what number to list it on BrickLink with! I have included pics of each
side of this piece in the hopes that someone here knows what it is.
Oh, and please!! If you don't know what it is, please don't reply like
the last time I asked. And yes, before anyone suggests it, I have searched the
color base, again with no luck considering there are thousands of BLACK pieces!!
|
|
|
Author: | here4bricks614 | Posted: | May 1, 2022 13:09 | Subject: | Re: Inventory Change Request for Set 6243-1 | Viewed: | 18 times | Topic: | Inventories Requests | |
| In Inventories Requests, MrVx writes:
| Please make changes to the following inventory:
* Add 1 Part 44728 Yellow Bracket 1 x 2 - 2 x 2
* Add 1 Part 3004 Dark Green Brick 1 x 2
|
These parts are present in the inventory for minifigure pi088.
|
Author: | Ellsbells17 | Posted: | May 1, 2022 12:52 | Subject: | 20% off most pieces! UK ONLY | Viewed: | 32 times | Topic: | Sales | |
| We have 20% off most pieces and have a flat rate shipping of just £1.50, 2nd
class! So grab your favourite pieces and build on your imagination.
|
Author: | MrVx | Posted: | May 1, 2022 12:45 | Subject: | Inventory Change Request for Set 6243-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 44728 Yellow Bracket 1 x 2 - 2 x 2
* Add 1 Part 3004 Dark Green Brick 1 x 2
|
|
Author: | here4bricks614 | Posted: | May 1, 2022 12:44 | Subject: | Re: Inventory Change Request for Set 4663-1 | Viewed: | 17 times | Topic: | Inventories Requests | |
| In Inventories Requests, here4bricks614 writes:
| Please make changes to the following inventory:
* Change 1 Part {Purple to Magenta} 6510 Duplo, Plant Flower with Stud
* Change 1 Part {Dark Purple to Medium Violet} 6510 Duplo, Plant Flower with Stud
Comments from Submitter:
Wouter and I have confirmed that part 6510 exists in TLG 219 Lilac, which is under BL Medium Violet and this is the only possible source. No evidence exists to suggest that this flower appeared in Dark Purple. Will attach photo of listing.
|
|
|
|
Author: | randyipp | Posted: | May 1, 2022 12:43 | Subject: | Inventory Change Request for Set 1258-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Black {x137 Rubber Band Medium (Square Cross Section) Thin Cut to x88 Rubber Band Small (Square Cross Section)}
* Change 1 Part Black {x137 Rubber Band Medium (Square Cross Section) Thin Cut to x88 Rubber Band Small (Square Cross Section)} (Extra)
Comments from Submitter:
Sealed set contents
|
|
Author: | here4bricks614 | Posted: | May 1, 2022 12:39 | Subject: | Inventory Change Request for Set 4663-1 | Viewed: | 29 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part {Purple to Magenta} 6510 Duplo, Plant Flower with Stud
* Change 1 Part {Dark Purple to Medium Violet} 6510 Duplo, Plant Flower with Stud
Comments from Submitter:
Wouter and I have confirmed that part 6510 exists in TLG 219 Lilac, which is under BL Medium Violet and this is the only possible source. No evidence exists to suggest that this flower appeared in Dark Purple. Will attach photo of listing.
|
|
Author: | randyipp | Posted: | May 1, 2022 12:39 | Subject: | Re: Inventory Change Request for Set 9247-2 | Viewed: | 15 times | Topic: | Inventories Requests | |
| In Inventories Requests, TakeAbricK writes:
|
ok, but did they come assembled in the box, or in un-assembled frames and wheels?
|
They were not assembled.
|
Author: | randyipp | Posted: | May 1, 2022 12:37 | Subject: | Re: Inventory Change Request for Set 9247-2 | Viewed: | 20 times | Topic: | Inventories Requests | |
| In Inventories Requests, here4bricks614 writes:
|
Can you spot a 7-digit number anywhere near the barcodes? Are either of them
4598355?
|
That exact number was not on any of the boxes.
There was an interesting find through, 3 of the 10 did not have this 118789 number
underneath the barcode. Not sure what that gets us but it is something. The
rest of the numbers on each box matched exactly.
|
|
|
Author: | here4bricks614 | Posted: | May 1, 2022 12:33 | Subject: | Inventory Change Request for Set 7586-1 | Viewed: | 25 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part 3852b Bright Light Orange Minifigure, Utensil Hairbrush - 10mm Handle (Alternate) (match ID 3)
* Delete 1 Part 6186 Bright Light Orange Teddy Bear, Belville / Scala (Alternate) (match ID 4)
* Change 1 Part {Medium Orange to (Not Applicable)} x248pb01 Belville Cloth Blanket 4 x 5 with Red Spots Pattern
* Change 1 Part {Medium Orange to Bright Light Orange} 3852b Minifigure, Utensil Hairbrush - 10mm Handle {match ID 3 to 0}
* Change 1 Part {Medium Orange to Bright Light Orange} 6186 Teddy Bear, Belville / Scala {match ID 4 to 0}
* Change 1 Part {Purple to Dark Purple} belvdress04 Belville, Clothes Dress (Adult) Sleeveless Net Top, White Skirt with Purple Dots Pattern
Comments from Submitter:
This blanket does not match any known color and should just be N/A.
It has been established now that this brush does not exist in Medium Orange, and there would have been no reason for LEGO to make a part in a color that had been retired for quite some time. This was more than likely just a mistake on behalf of the person who first inventoried this set.
The bear is likely also just a mistake. The Bright Light Orange alternates were added later on and were assumed to be alternates. Other Belville sets from 2007 were also edited to remove these Medium Orange bears. No evidence exists to suggest that these ever appeared in sets as late as 2008.
Purple should not have been used to make new parts after 2003. This dress is more of a Dark Purple.
Deleting the alternates and changing the colors of the main inventory parts.
|
|
Author: | randyipp | Posted: | May 1, 2022 12:28 | Subject: | Re: Question about set 1258-1 | Viewed: | 23 times | Topic: | Inventories | |
| In Inventories, randyf writes:
| I believe you are correct in your assumption. Those do look like x88.
I would have the inventory changed.
|
Ok, thanks for that!
|
Author: | mdvmes | Posted: | May 1, 2022 12:02 | Subject: | LEGO® Marvel Art Colour Prints. | Viewed: | 60 times | Topic: | Buying | |
| Does anyone know if these come with any Lego water marks on the paper to show
it is legit?
Thank you!
|
|
Author: | Shiny_Stuff | Posted: | May 1, 2022 11:40 | Subject: | Re: Does Processing status allow Payment? | Viewed: | 31 times | Topic: | Selling | |
| In Selling, Shiny_Stuff writes:
| Dumb Question Time:
As a seller, can I set an order at PROCESSING, send the Invoice, and receive
payment under that status ???
Sometimes when I receive a complicated order, I do prefer to send the Invoice
BEFORE I have picked and packed the order and set it to READY.
This was never a problem before On-Site Payment. Now, I am not so sure.
Thanks for your helpful answers.
____
|
A-HA !!
The buyer I invoiced just made payment successfully while the order was at PROCESSING.
Now, the status is happily at PAID.
If I had only waited a few more minutes, I would have been able to answer my
own question.
I will leave the message up in case other sellers have wondered the same thing.
Now for something completely different.
____
|
|
Author: | mdvmes | Posted: | May 1, 2022 11:39 | Subject: | Re: Lego Deadpool minifig question. | Viewed: | 53 times | Topic: | Buying | |
| That's crazy! So people like me who doesn't know any better could have
picked up a fake one?
Do you have a link to the check the different markings on the Deadpool minifig.
I appreciate the reply btw. I'm doing all this research for my son who's
a huge lego marvel fan but is only 4.
In Buying, yorbrick writes:
| In Buying, mdvmes writes:
| Is that a fact?
So how does one tell and what can you do if you bought one thinking it was a
legit minifig?
In Buying, yorbrick writes:
| In Buying, mdvmes writes:
| Is it possible for Chinese knock-off minifigs to come with official Lego markings?
|
Not really, Chinese knock offs tend to be true knock offs and don't put lego
symbols. However there are knock offs printed on genuine lego parts. There was
an influx of Deadpool parts a few years ago.
|
|
At one stage 1000s of Deadpool heads got listed here, and sold in bulk to sellers
worldwide who then sell them on.
There were also some where the eyes weren't quite tge right shape, these
are reasonably easy to spot especially if you can put them next to a genuine
one.
|
|
|
Author: | Shiny_Stuff | Posted: | May 1, 2022 11:28 | Subject: | Does Processing status allow Payment? | Viewed: | 63 times | Topic: | Selling | |
| Dumb Question Time:
As a seller, can I set an order at PROCESSING, send the Invoice, and receive
payment under that status ???
Sometimes when I receive a complicated order, I do prefer to send the Invoice
BEFORE I have picked and packed the order and set it to READY.
This was never a problem before On-Site Payment. Now, I am not so sure.
Thanks for your helpful answers.
____
|
|
Author: | here4bricks614 | Posted: | May 1, 2022 11:05 | Subject: | Re: Copper to Reddish Gold | Viewed: | 33 times | Topic: | Catalog Requests | |
| In Catalog Requests, TakeAbricK writes:
| In Catalog Requests, TakeAbricK writes:
| In Catalog Requests, here4bricks614 writes:
| In Catalog Requests, TakeAbricK writes:
| In Catalog Requests, TakeAbricK writes:
| Please change color Copper to Reddish Gold for the following Items:
|
|
|
|
Update Pending for Approval Catalog color moves:
| -----
The following items are pending approval for catalog changes and are checked:
(after catalog changes are completed, the inventory change request will be approved)
PCC 4260749 (Matches the crown ID in the instruction manual)
pending for catalog changes, please change Copper to Reddish Gold
Also exists in pearl gold (already in catalog with PCC 4493378)
The color image of Copper looks just like my reddish gold
All 3 sets checked and inventory change requests pending approval
-----
PCC 4253714 (at this moment Reddish Gold has the same PCC as Flat Dark Gold)
pending for catalog changes, please change Copper to Reddish Gold and remove
PCC RG
Also exists in Flat Dark Gold (PCC 428079 correct?) and Pearl Gold (no PCC)
All 3 sets checked and inventory change requests pending approval
-----
PCC 4255509
pending for catalog changes, please change Copper to Reddish Gold
Has PCC 4493549 for copper, which I think could be Pearl Gold (see Brickset),
but nobody ever added it as alternate to set 8796-1.
Set checked and inventory change request pending approval.
-----
PCC 4255510
pending for catalog changes, please change Copper to Reddish Gold
can PCC 4284503 be moved from Copper to Pearl Gold?
BL has PCC 4284503 for copper
Brickset has 4284503 for pearl gold, no proof so far Pearl Gold came in a set
though
no color id for flat dark gold
2 set checked, inventory change requests pending approval
-----
PCC 4256812
pending for catalog changes, please change copper to reddish gold
Set checked, inventory change request pending approval
------------------------------------------------------------------------------------------------------
The following items need more research:
PCC 4220674
pending for catalog changes,
So far only copper is a known color (pearl light gold and pearl gold for sale,
but not in any inventory)
Set 8771-1 was checked , leaves another 4 sets to check.
|
Imo this one could be moved to Reddish Gold also.
It's very obvious now that all these 'Knights Kingdom II' parts don't
exist in Copper.
If this sword is ever found in another Gold color, it can be added later once
there's proof. One seller has own images for this part, that look like Flat
Dark Gold, but these images don't show the right color imo, an image of a
Flat Dark Gold sword almost looks black.
We really need to get rid of these Copper parts that aren't copper.
|
: PCC 4223106
Reddish Gold is already in the catalog with PCC 4223106
Copper has a rendered image and no PCC
Metallic Gold has no color image, nor a PCC
I have this sword in 6 different ‘Gold’ shades. Both Reddish Gold and Pearl
Gold in 2 different shades, the darkest of each has some kind of a metallic look.
So my guess is that sellers list the darker ones as Copper, resp. Metallic Gold
and that it came in the inventories because of the same reason. Besides those
4, I have a Flat Dark Gold and one that could be Light Pearl Gold (I have nothing
left to compare).
Besides Copper, I also think this sword doesn’t exist in Metallic Gold (not sure
though).
About the ones I have: no idea from which sets they came.
|
This is the hardest one.
At the moment there are 10 sets left with this sword in Copper.
Jen has to find her set
I will send a message to bunte-steine.de who has 396 out of the 580 listings
for sale. I'll ask to check the colors and if he knows from which sets /
year they came. It looks like he doesn't add new parts to old listings.
|
Item 52655: PCC 4260754
Brickset's is NOT SPECIFIED, but this ID suggests that it is too early to
be Pearl Gold.
|
The color comes closest to the Pearl Gold Knight Kingdom Shields, but like said
above the PCC suggests that it's too early to be Pearl Gold.
Daniel suggests to move this one to N/A
|
--------------------------------------------------------------------------------------------------------------------------
: CID 4221623, 4244147
This part may display extreme variation. Still attempting to confirm
Reddish Gold element IDs span from 4185113 to 4268864
Pearl Gold IDs start at 4278076
|
Comments from Daniel:
Any ‘Gold’ items with element IDs 4275XXX+ should be Pearl Gold, but like some
parts, only element IDs exist. Some of the parts never made it into any sets.
47474 has been confirmed by Ryan to be Reddish Gold.
|
I believe all 48495s should be moved to Reddish Gold. As it stands, a buyer-seller
issue exists because Reddish Gold swords exist under ‘Reddish Gold’ and ‘Copper’.
A buyer would be incredibly confused to learn that both swords they purchased
were the exact same color, leading to potential bad reviews that are of no fault
of the seller. There’s enough evidence to suggest that this part does not exist
in Copper.
|
|
Author: | cedarsith | Posted: | May 1, 2022 10:59 | Subject: | May Sale - 35% - 45% Everything! New New New! | Viewed: | 99 times | Topic: | Sales | |
| May Sale - 35% - 45% Everything! New New New! |
Author: | Anphrax | Posted: | May 1, 2022 10:50 | Subject: | May SALE - 30% on ALL items!!! | Viewed: | 72 times | Topic: | Sales | |
| Hello Legofan!
Summer is getting closer, but for those dedicated LEGO builders, that stay in,
and have fun with some bricks, BG_Bricks is here to help, with a great May SALE,
with 30% off on ALL items!!! So go check it out, and see if I got what you need,
at a good price!
New items will be added continuously, so remember too check by from time too
time.
Happy building!
|
|
Author: | Doubletap28 | Posted: | May 1, 2022 10:35 | Subject: | Re: 40% off All Figs Need Them All gone! | Viewed: | 40 times | Topic: | Sales | |
| Still have figs left if anyone wants a good flip check out my store if your interested
in buying all the figs for a great deal! Thanks
In Sales, Doubletap28 writes:
| Hello everyone,
I currently have a little over 150 mini figs left in my store trying to find
them a new home if you are interested please check out my store and if you want
them all we can make a good deal for them!
Thanks
Eric
|
|
|
Author: | yorbrick | Posted: | May 1, 2022 10:15 | Subject: | Re: Lego Deadpool minifig question. | Viewed: | 58 times | Topic: | Buying | |
| In Buying, mdvmes writes:
| Is that a fact?
So how does one tell and what can you do if you bought one thinking it was a
legit minifig?
In Buying, yorbrick writes:
| In Buying, mdvmes writes:
| Is it possible for Chinese knock-off minifigs to come with official Lego markings?
|
Not really, Chinese knock offs tend to be true knock offs and don't put lego
symbols. However there are knock offs printed on genuine lego parts. There was
an influx of Deadpool parts a few years ago.
|
|
At one stage 1000s of Deadpool heads got listed here, and sold in bulk to sellers
worldwide who then sell them on.
There were also some where the eyes weren't quite tge right shape, these
are reasonably easy to spot especially if you can put them next to a genuine
one.
|
|
Author: | axaday | Posted: | May 1, 2022 10:08 | Subject: | Re: New APV Issue on Me | Viewed: | 23 times | Topic: | Shipping | |
| In Shipping, axaday writes:
| I got notified by ShipStation that they had to give $3.48 of my hard earned money
to USPS because of APV. It is the first time I have had that with ShipStation.
The email doesn't tell me anything, but I dug in and found a CSV that is
mainly gibberish, but under reason code it says DUPLICATE.
The charge they took from me was equal to the charge I originally paid for the
package. I don't know what duplicate means.
|
Heads up! My request for them to refund me was denied. First time that happened
to me. So I paid twice for the same shipment for a reason called "Duplicate"
with no explanation. I expect it has to do with ShipStation reusing tracking
numbers.
|
|
Author: | Newwavehic | Posted: | May 1, 2022 10:01 | Subject: | ***BLUEBONNET BRICKS MINIFIGURE GIVEAWAYS!*** | Viewed: | 55 times | Topic: | Sales | |
| Title says it all BlueBonnet Bricks is giving TWO minifigures for the month of
May! The image attached has all info regarding the details of this month's
giveaways, this can also be found on my store Splash Page. If you have any other
questions please feel free to message me, and as always "May The Force be with
you"!
|
|
Author: | Newwavehic | Posted: | May 1, 2022 09:58 | Subject: | ***BLUEBONNET BRICKS MINIFIGURE GIVEAWAYS!*** | Viewed: | 45 times | Topic: | Announce | |
| Title says it all BlueBonnet Bricks is giving TWO minifigures for the month of
May! The image attached has all info regarding the details of this month's
giveaways, this can also be found on my store Splash Page. If you have any other
questions please feel free to message me, and as always "May The Force be with
you"!
|
|
|
Author: | aboyer | Posted: | May 1, 2022 09:38 | Subject: | Re: Buyer purchases then asks for extra parts | Viewed: | 67 times | Topic: | Problem | |
| In Problem, brac.brick writes:
| Just wondering what the general consensus is when a buyer makes a purchase in
your store , you pull it, invoice it and then they start asking for extra parts
. (not included in the invoice). I have had this happen several times recently,
some buyer have already paid and sent the message and others have not paid yet
.
Not sure if this is a recent trend or I am just the unlucky seller who gets
these requests. These aren't usually requests for parts which are expensive
and I usually decide on a case by case basis. Just wondering what the rest of
you do about requests like these if you get them.
|
I did this to two stores a few months ago - found I was missing some window glass
while building a set.
One store threw a few of them in the box, gratis. That was very kind of them.
The other store pushed the order state back, refunded me, let me add the parts,
re-pay etc. It was a hassle for me and the store and must have cost them more
in Paypal fees than the parts were worth. I would have preferred they just decline
the request - “Sorry, too late” would have been fine. I appreciate the effort
though.
Andrew
|
|
Author: | Taz21 | Posted: | May 1, 2022 09:14 | Subject: | 30 percent off all build parts | Viewed: | 45 times | Topic: | Sales | |
| I decide to extend the sale through this weekend hurry in get those parts you
need while they last
|
Author: | mdvmes | Posted: | May 1, 2022 08:52 | Subject: | Re: Lego Deadpool minifig question. | Viewed: | 49 times | Topic: | Buying | |
| Is that a fact?
So how does one tell and what can you do if you bought one thinking it was a
legit minifig?
In Buying, yorbrick writes:
| In Buying, mdvmes writes:
| Is it possible for Chinese knock-off minifigs to come with official Lego markings?
|
Not really, Chinese knock offs tend to be true knock offs and don't put lego
symbols. However there are knock offs printed on genuine lego parts. There was
an influx of Deadpool parts a few years ago.
|
|
|
Author: | yorbrick | Posted: | May 1, 2022 08:50 | Subject: | Re: Lego Deadpool minifig question. | Viewed: | 42 times | Topic: | Buying | |
| In Buying, mdvmes writes:
| Is it possible for Chinese knock-off minifigs to come with official Lego markings?
|
Not really, Chinese knock offs tend to be true knock offs and don't put lego
symbols. However there are knock offs printed on genuine lego parts. There was
an influx of Deadpool parts a few years ago.
|
|
Author: | yorbrick | Posted: | May 1, 2022 08:47 | Subject: | Re: Price Guide Shows Diff Than Purchase Price - | Viewed: | 32 times | Topic: | Price Guide | |
| In Price Guide, CollectibleLEGO writes:
| Hello,
I have made some purchases recently in USD, CAD, and NOK. When viewing Price
Guide, and seeing what I paid, the value under "Sold" is higher than what was
on my order, ONLY for NOK. USD and CAD the values are the same..
My question is, am I truly paying what I see in my order / invoice? Why would
an item be listed and sold in my order for 300 NOK but show on the price guide
at 375 NOK ?
Any help is appreciated. Thank you in advance.
- Andrew @CollectibleLEGO // A Collectible Experience
|
Presumably VAT. It is showing what the price would have been if local (Norway)
VAT had been paid.
|
|
Author: | randyf | Posted: | May 1, 2022 08:17 | Subject: | Re: catalog pic show the partID too | Viewed: | 41 times | Topic: | Catalog | |
| In Catalog, tec writes:
| In Catalog, randyf writes:
| In Catalog, tec writes:
| Somehow I was able to see an ID inscribed onto a "render" image.
select color BLACK to see
too bad it's not 093 but part 4697b
but nice easter egg
|
It's actually 'LEGO' upside down and not a part number.
|
nice
should we redo it the right way?
|
The render comes directly from LEGO, so we do not need to alter it. Just use
your imagination to flip the part over in your head.
|
|
Author: | brac.brick | Posted: | May 1, 2022 08:06 | Subject: | Re: Buyer purchases then asks for extra parts | Viewed: | 57 times | Topic: | Problem | |
| In Problem, firestar246 writes:
| In Problem, peregrinator writes:
| I reserve the extra parts for the buyer and ask him or her to place another order,
selecting manual invoice so I can set shipping to zero, then send both orders
together.
|
This. I also charge a $0.50 to compensate for the extra fees and hassle. Sometimes
the buyer will then decline, but many times they'll go through with it and
even add a couple extra items.
|
Great idea as well - will keep it in mind the next time this happens - thanks
|
|
Author: | tec | Posted: | May 1, 2022 07:57 | Subject: | Re: catalog pic show the partID too | Viewed: | 27 times | Topic: | Catalog | |
| In Catalog, randyf writes:
| In Catalog, tec writes:
| Somehow I was able to see an ID inscribed onto a "render" image.
select color BLACK to see
too bad it's not 093 but part 4697b
but nice easter egg
|
It's actually 'LEGO' upside down and not a part number.
|
nice
should we redo it the right way?
|
|
Author: | randyf | Posted: | May 1, 2022 07:47 | Subject: | Re: Inventory Change Request for Set 4663-1 | Viewed: | 24 times | Topic: | Inventories Requests | |
| In Inventories Requests, TakeAbricK writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, WoutR writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, WoutR writes:
| In Inventories Requests, here4bricks614 writes:
| Do you own two different shades of ‘Medium Violet’? I still think these flowers
are Green, Dark Pink, Magenta, and Medium Violet.
|
Two shades of "Medium Violet": 112 Medium Bluish Violet and 219 Lilac ("Medium
Reddish Violet")
|
Beautiful!
|
It's my photo. They can be harvested, but I would not know how to upload
them as long as BrickLink still conflates these colours.
|
You can upload one of them first, and I would accept it. After that, you can
upload the second image, and I can add it as an additional image to the color.
|
Randy, this change request is about changing
to
You added the Dark Bluish Gray image of the old one to the catalog, but it looks
like the new Hippo Baby. Did you copy this image from Brickset and is there a
chance the old variant doesn't exist in Dark Bluish Gray and it should have
been the new version from the start?
Or do/did you have the Hippo Baby yourself? In that case: do you know if the
image is correct, for I can't find any Hippo Baby on the internet with those
eyes (except on all copies at Brickset, Bricklink, Brickowl, Rebrickable).
Thanks,
Diana
|
Hi Diana!
I do not have this hippo baby. When I added that image, I was probably a newbie
around here. I am sure I didn't even know about variants or anything like
that. The image would have been directly from LEGO or Brickset. I can tell it
is a very old image of mine because it is at 80 x 60 pixel resolution. I have
not submitted images in that size for many, many, many years.
Cheers,
Randy
|
|
Author: | tons_of_bricks | Posted: | May 1, 2022 07:43 | Subject: | Re: Buyer purchases then asks for extra parts | Viewed: | 60 times | Topic: | Problem | |
| In Problem, peregrinator writes:
| I reserve the extra parts for the buyer and ask him or her to place another order,
selecting manual invoice so I can set shipping to zero, then send both orders
together.
|
This. I also charge a $0.50 to compensate for the extra fees and hassle. Sometimes
the buyer will then decline, but many times they'll go through with it and
even add a couple extra items.
|
|
Author: | brac.brick | Posted: | May 1, 2022 07:42 | Subject: | Re: Buyer purchases then asks for extra parts | Viewed: | 53 times | Topic: | Problem | |
| In Problem, peregrinator writes:
| In Problem, brac.brick writes:
| Just wondering what the general consensus is when a buyer makes a purchase in
your store , you pull it, invoice it and then they start asking for extra parts
. (not included in the invoice). I have had this happen several times recently,
some buyer have already paid and sent the message and others have not paid yet
.
Not sure if this is a recent trend or I am just the unlucky seller who gets
these requests. These aren't usually requests for parts which are expensive
and I usually decide on a case by case basis. Just wondering what the rest of
you do about requests like these if you get them.
|
I reserve the extra parts for the buyer and ask him or her to place another order,
selecting manual invoice so I can set shipping to zero, then send both orders
together.
|
I like the idea- do you do this for orders of low values - like less than 1$
?
|
|
Author: | peregrinator | Posted: | May 1, 2022 07:42 | Subject: | Re: Selling dismembered heads: good idea? | Viewed: | 28 times | Topic: | Selling | |
| In Selling, mkim05 writes:
| I think I had seen somewhere else on the forums that full minifigs always sell
better than parts... but I'm not sure if the person who wants 20 of the same
minidoll is going to find my store before I die.
|
Always? Probably not, especially where City minifigures are concerned. I would
part them out (sell as heads, torsos, legs, etc.) unless they're vintage.
As far as Friends mini-dolls are concerned, in my experience they only sell at
certain times of the year and the parts, hardly ever.
|
|
Author: | peregrinator | Posted: | May 1, 2022 07:37 | Subject: | Re: Buyer purchases then asks for extra parts | Viewed: | 51 times | Topic: | Problem | |
| In Problem, brac.brick writes:
| Just wondering what the general consensus is when a buyer makes a purchase in
your store , you pull it, invoice it and then they start asking for extra parts
. (not included in the invoice). I have had this happen several times recently,
some buyer have already paid and sent the message and others have not paid yet
.
Not sure if this is a recent trend or I am just the unlucky seller who gets
these requests. These aren't usually requests for parts which are expensive
and I usually decide on a case by case basis. Just wondering what the rest of
you do about requests like these if you get them.
|
I reserve the extra parts for the buyer and ask him or her to place another order,
selecting manual invoice so I can set shipping to zero, then send both orders
together.
|
|
Author: | brac.brick | Posted: | May 1, 2022 07:31 | Subject: | Buyer purchases then asks for extra parts | Viewed: | 172 times | Topic: | Problem | |
| Just wondering what the general consensus is when a buyer makes a purchase in
your store , you pull it, invoice it and then they start asking for extra parts
. (not included in the invoice). I have had this happen several times recently,
some buyer have already paid and sent the message and others have not paid yet
.
Not sure if this is a recent trend or I am just the unlucky seller who gets
these requests. These aren't usually requests for parts which are expensive
and I usually decide on a case by case basis. Just wondering what the rest of
you do about requests like these if you get them.
|
|
Author: | ACExperience | Posted: | May 1, 2022 07:08 | Subject: | Price Guide Shows Diff Than Purchase Price - | Viewed: | 84 times | Topic: | Price Guide | |
| Hello,
I have made some purchases recently in USD, CAD, and NOK. When viewing Price
Guide, and seeing what I paid, the value under "Sold" is higher than what was
on my order, ONLY for NOK. USD and CAD the values are the same..
My question is, am I truly paying what I see in my order / invoice? Why would
an item be listed and sold in my order for 300 NOK but show on the price guide
at 375 NOK ?
Any help is appreciated. Thank you in advance.
- Andrew @CollectibleLEGO // A Collectible Experience
|
|
Author: | TakeAbricK | Posted: | May 1, 2022 06:57 | Subject: | Re: Inventory Change Request for Set 9247-2 | Viewed: | 21 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyipp writes:
| In Inventories Requests, TakeAbricK writes:
| So far the 1-piece wheels came in sets starting 2011, but I have no idea how
long this set was in production. Does the box show a copyright after 2006?
|
All the Boxes say 2006
| Did the Bicycle come assembled or in separate parts?
All 4719c02 are listed in inventories as separate parts, with the complete bicycle
as counterpart.
|
Neither of the 1 piece and 2 piece bikes came assembled this time.
The 5 sets I opened in 2020 were all assembled, and were all 2 piece wheels.
| I did notice that the 2-piece wheels are still in the inventory of
Wondering if the 1-piece wheel came far before 2011 already. It was added to
the catalog March 25, 2015, while set 9348-1 was inventoried February 19, 2011.
Paul added the 1-piece wheels as alternate in 2016. Wondering if the 2-piece
wheels ever came in this set.
Diana
|
I opened 31 of the 9348 last year and 6 of the bikes were 2 piece wheels.
|
ok, but did they come assembled in the box, or in un-assembled frames and wheels?
|
To add to this confusion 39 of the 310 heads were c variant in 9247-2.
|
The heads are a different chapter when they are in minifigs in the set.
But if you know which heads, you can add the c-variants as alternate items.
Diana
|
|
Author: | Stellar | Posted: | May 1, 2022 06:44 | Subject: | Re: want to buy a brand new train | Viewed: | 38 times | Topic: | Buying | |
| In Buying, tigerchen writes:
| Hello everyone
I want to buy a brand new train
4558 4564 4547 4551 7740 7720 7710 7715 7725 7730 7727 7745 7760 7755 7750
If you want to sell any of them, please let me know!
thank you very much
|
Add them to a wanted list and there you can see the sellers that have them:
https://www.bricklink.com/v2/wanted/list.page
|
Author: | BlackfieldBrick | Posted: | May 1, 2022 06:38 | Subject: | Wiedereröffnung - 50 % Rabatt | Viewed: | 49 times | Topic: | Sales | |
| Ab heute ist der Shop wieder online.
50 % Rabatt auf alles.
Brick Space Store
|
|
Author: | randyf | Posted: | May 1, 2022 06:00 | Subject: | Re: Please change color image / xref | Viewed: | 26 times | Topic: | Catalog Requests | |
| In Catalog Requests, TakeAbricK writes:
| In Catalog Requests, randyf writes:
| In Catalog Requests, TakeAbricK writes:
| Please move images / xref to Flat Dark Gold for the 2 item below
|
Done.
|
has PCC for Pearl Light Gold, no idea where it comes from
|
Done.
|
Thanks Randy.
I noticed the large images for both shields are gone (noticed it with other parts
in the past). Does it dissapear because of these moves to another color?
Diana
|
Everything works fine for me. Are you using the links above to go to the catalog
pages? Because if you are, they are linked to Pearl Gold. And since Pearl Gold
no longer exists, no Pearl Gold images will show on the catalog pages. If you
just go to the catalog pages from the search bar at the top of the page, you
should see everything correctly. Or you can use these new links:
Cheers,
Randy
|
|
Author: | randyf | Posted: | May 1, 2022 05:52 | Subject: | Re: Question about set 1258-1 | Viewed: | 31 times | Topic: | Inventories | |
| In Inventories, randyipp writes:
| So I cracked open a few tiny technic sets
And inventory seems good, I did have an extra rubber band in each but the issue
I am having is that it appears that 1258 actually has
|
I believe you are correct in your assumption. Those do look like x88.
| see comparison photo, these were sealed boxes, sealed bags. Does it make sense
to change it or add it as an alternate?
|
I would have the inventory changed.
|
|
Author: | Sadler_Bricks | Posted: | May 1, 2022 05:22 | Subject: | Re: WANTED: miscellaneous minifigs and parts | Viewed: | 49 times | Topic: | Wanted | |
| Sounds like a fun idea here. Good luck on the lego journey.
Sadler_bricks
|
Author: | Sadler_Bricks | Posted: | May 1, 2022 05:18 | Subject: | Re: What is LEGO? | Viewed: | 63 times | Topic: | LEGO products | |
| Lol. The plastic that keeps on giving.
Sadler_bricks
|
Author: | Sadler_Bricks | Posted: | May 1, 2022 05:15 | Subject: | Re: 18'000'000 order give away for UK buyers | Viewed: | 44 times | Topic: | Contests | |
| Wonder how long it might take till the 20th mill. 18 mil is pretty good.
Sadler_bricks
|
Author: | Sadler_Bricks | Posted: | May 1, 2022 05:12 | Subject: | + + + Thousands of parts added + sales | Viewed: | 37 times | Topic: | Sales | |
| Some random sales with thousands of parts added weekly with a wide range of colors
and shapes plus new mini figs
Quality packaging
No hidden fees
No min fees
Fair pricing
Come checkout our ever growing store of 600k and more let us fill any of your
mini figs and part needs or wants at fair pricing
Sadler_bricks
https://store.bricklink.com/Sadler_Bricks#/shop
|
|
Author: | beaverbrick | Posted: | May 1, 2022 04:00 | Subject: | Re: Sold item not removed from Inventory | Viewed: | 52 times | Topic: | Technical Issues | |
| In Technical Issues, PieceOfMind writes:
| I had a rare Lego which was ordered on April 12. I didn't happen to check
my inventory or website so I don't know if it remained or was deleted. On
April 27th I received another order for the same part. I've only been doing
this for 2 months, does anyone know how this happened?
|
Possibly a duplicate listing.
If you open the original order (for the piece you sold) and hover over the image
of the item, you can see the Lot ID (see attached image).
Compare this Lot ID with the second order. If the Lot ID's are different
then you had a duplicate listing.
|
|
|
Author: | PieceOfMind | Posted: | May 1, 2022 03:52 | Subject: | Sold item not removed from Inventory | Viewed: | 104 times | Topic: | Technical Issues | |
| I had a rare Lego which was ordered on April 12. I didn't happen to check
my inventory or website so I don't know if it remained or was deleted. On
April 27th I received another order for the same part. I've only been doing
this for 2 months, does anyone know how this happened?
|
Author: | TakeAbricK | Posted: | May 1, 2022 03:42 | Subject: | Re: Part description wrong? | Viewed: | 24 times | Topic: | Catalog Identification | |
| In Catalog Identification, tpr writes:
| Hi
Description says its 4x4x2
Looks more like 4x2x2
Any admin have one to check
tpr
|
I don't have it, but it looks more like 5 x 3 x 3?
Looking at the images on stud plate.
Diana
|
Author: | tpr | Posted: | May 1, 2022 03:10 | Subject: | Part description wrong? | Viewed: | 74 times | Topic: | Catalog Identification | |
| Hi
Description says its 4x4x2
Looks more like 4x2x2
Any admin have one to check
tpr
|
|
Author: | mdvmes | Posted: | May 1, 2022 03:05 | Subject: | Re: Lego Deadpool minifig question. | Viewed: | 45 times | Topic: | Buying | |
| Is it possible for Chinese knock-off minifigs to come with official Lego markings?
In Buying, tEoS writes:
| Does your Deadpool feel fake?
Despite having all the Lego markings, the plastic used for mine feels like a
cheap Chinese knockoff. I think it also has loose connections
In Buying, mdvmes writes:
| Hi,
I just wanted to ask the community if anyone owns a Lego Deadpool minifig.
I won an eBay bid on one last week and it arrived today.
The feet, torso, and neck all have Lego logo on it, but the head is hollow and
open at both ends.
Can someone please confirm that the official Lego version does have Lego written
on the top of it please?
Thanks in advance.
|
|
|
|
Author: | mdvmes | Posted: | May 1, 2022 03:03 | Subject: | Re: Lego Deadpool minifig question. | Viewed: | 36 times | Topic: | Buying | |
| Ok. Awesome!
Good to know. Thank you! 👍🏼
In Buying, peregrinator writes:
| In Buying, mdvmes writes:
| I am disappointed that it wasn't detailed in the description when I bid on
it from eBay. I'm going to try and get a partial refund for it to help pay
for an official head.
|
You have an official head, the minifigure can come with either the blocked open
stud version or the hollow stud version:
https://www.bricklink.com/catalogItemInv.asp?M=sh032
For better or for worse BL does not allow for "alternate" parts in minifigures,
but you can still sell the one you have on BL, just add a note as to the type
of head it has.
|
|
|
Author: | mdvmes | Posted: | May 1, 2022 03:01 | Subject: | Re: Lego Deadpool minifig question. | Viewed: | 35 times | Topic: | Buying | |
| Interesting. I didn't know that.
The only reason why I can think the hole with the vent is there is just incase
a child swallows it or sticks it up it's nose and it gets stuck and the hole
allows air flow? Dunno.🤔
In Buying, Nubs_Select writes:
| I think they do it that way since notes are for more notable differences as compared
to hollow/blocked heads being on the same Minifigure which is very common
|
|
|
Author: | TakeAbricK | Posted: | May 1, 2022 02:58 | Subject: | Re: Copper to Reddish Gold | Viewed: | 48 times | Topic: | Catalog Requests | |
| In Catalog Requests, TakeAbricK writes:
| In Catalog Requests, here4bricks614 writes:
| In Catalog Requests, TakeAbricK writes:
| In Catalog Requests, TakeAbricK writes:
| Please change color Copper to Reddish Gold for the following Items:
|
|
|
|
Update Pending for Approval Catalog color moves:
| -----
The following items are pending approval for catalog changes and are checked:
(after catalog changes are completed, the inventory change request will be approved)
PCC 4260749 (Matches the crown ID in the instruction manual)
pending for catalog changes, please change Copper to Reddish Gold
Also exists in pearl gold (already in catalog with PCC 4493378)
The color image of Copper looks just like my reddish gold
All 3 sets checked and inventory change requests pending approval
-----
PCC 4253714 (at this moment Reddish Gold has the same PCC as Flat Dark Gold)
pending for catalog changes, please change Copper to Reddish Gold and remove
PCC RG
Also exists in Flat Dark Gold (PCC 428079 correct?) and Pearl Gold (no PCC)
All 3 sets checked and inventory change requests pending approval
-----
PCC 4255509
pending for catalog changes, please change Copper to Reddish Gold
Has PCC 4493549 for copper, which I think could be Pearl Gold (see Brickset),
but nobody ever added it as alternate to set 8796-1.
Set checked and inventory change request pending approval.
-----
PCC 4255510
pending for catalog changes, please change Copper to Reddish Gold
can PCC 4284503 be moved from Copper to Pearl Gold?
BL has PCC 4284503 for copper
Brickset has 4284503 for pearl gold, no proof so far Pearl Gold came in a set
though
no color id for flat dark gold
2 set checked, inventory change requests pending approval
-----
PCC 4256812
pending for catalog changes, please change copper to reddish gold
Set checked, inventory change request pending approval
------------------------------------------------------------------------------------------------------
The following items need more research:
PCC 4220674
pending for catalog changes,
So far only copper is a known color (pearl light gold and pearl gold for sale,
but not in any inventory)
Set 8771-1 was checked , leaves another 4 sets to check.
|
Imo this one could be moved to Reddish Gold also.
It's very obvious now that all these 'Knights Kingdom II' parts don't
exist in Copper.
If this sword is ever found in another Gold color, it can be added later once
there's proof. One seller has own images for this part, that look like Flat
Dark Gold, but these images don't show the right color imo, an image of a
Flat Dark Gold sword almost looks black.
We really need to get rid of these Copper parts that aren't copper.
|
: PCC 4223106
Reddish Gold is already in the catalog with PCC 4223106
Copper has a rendered image and no PCC
Metallic Gold has no color image, nor a PCC
I have this sword in 6 different ‘Gold’ shades. Both Reddish Gold and Pearl
Gold in 2 different shades, the darkest of each has some kind of a metallic look.
So my guess is that sellers list the darker ones as Copper, resp. Metallic Gold
and that it came in the inventories because of the same reason. Besides those
4, I have a Flat Dark Gold and one that could be Light Pearl Gold (I have nothing
left to compare).
Besides Copper, I also think this sword doesn’t exist in Metallic Gold (not sure
though).
About the ones I have: no idea from which sets they came.
|
This is the hardest one.
At the moment there are 10 sets left with this sword in Copper.
Jen has to find her set
I will send a message to bunte-steine.de who has 396 out of the 580 listings
for sale. I'll ask to check the colors and if he knows from which sets /
year they came. It looks like he doesn't add new parts to old listings.
|
Item 52655: PCC 4260754
Brickset's is NOT SPECIFIED, but this ID suggests that it is too early to
be Pearl Gold.
|
The color comes closest to the Pearl Gold Knight Kingdom Shields, but like said
above the PCC suggests that it's too early to be Pearl Gold.
Daniel suggests to move this one to N/A
|
--------------------------------------------------------------------------------------------------------------------------
: CID 4221623, 4244147
This part may display extreme variation. Still attempting to confirm
Reddish Gold element IDs span from 4185113 to 4268864
Pearl Gold IDs start at 4278076
|
Comments from Daniel:
Any ‘Gold’ items with element IDs 4275XXX+ should be Pearl Gold, but like some
parts, only element IDs exist. Some of the parts never made it into any sets.
47474 has been confirmed by Ryan to be Reddish Gold.
|
|
Author: | SylvainLS | Posted: | May 1, 2022 02:54 | Subject: | Re: Order numbers | Viewed: | 31 times | Topic: | General | |
| In General, jennnifer writes:
| I don't know why this pleases me so much, but it does.
|
Lovely number
It’s funny how our minds constantly look for patterns.
Generally it’s faces (in clouds, rocks, or toasted bread) but for some of us
it’s in numbers too.
Each time I work with part IDs, I catch stray half-counscious thoughts trying
to find relations between IDs or bettween the digits in an ID.
I’ve to tell myself that, no, stop looking, 93089 isn’t a palindrome… but it’s
a prime (you checked last time!) and there’s nothing really peculiar in 24246
|
|
Author: | Stonemonkey1974 | Posted: | May 1, 2022 02:52 | Subject: | Re: Selling dismembered heads: good idea? | Viewed: | 33 times | Topic: | Selling | |
| In Selling, RecycledBrick writes:
| If I can't complete the minifig I sell the parts. Unless it is a higher
valued minifig I will keep the parts until I can complete it but most go into
inventory as parts. The parts do sell
|
This. ATM all I'm selling in MF and MF parts due to lack of space and they
do sell. The only reason I'm up at 7am on a Bank Holiday Sunday is because
I've just had an order for 12 items, all MF parts. TBH friends mini doll
heads aren't the greatest sellers but I've sold a few in the last couple
of months.
|
|
Author: | Stonemonkey1974 | Posted: | May 1, 2022 02:46 | Subject: | Re: Bionicle parts | Viewed: | 22 times | Topic: | Price Guide | |
| In Price Guide, WhiteWolf73 writes:
| Hi,
I’m trying to find out an average price for assorted Bionicle parts. They don’t
belong to any particular sets, they’re just extras we bought our son over the
years and he’s ready to move them on. He’s bagged them up and they weigh about
750g per bag (rough estimate). The parts include some masks, joints and general
bits and pieces.
All of the bags are this size and contain roughly the same amount of pieces.
Any help would be greatly appreciated.
Thank you
|
Like others have said it varies wildly. Masks do well and parts that get lost
easily, projectile discs etc.
One thing I would suggest is you double check ball joint sockets as these crack
very easily and it can be quite hard to spot.
|
|
Author: | Roxyncz | Posted: | May 1, 2022 02:44 | Subject: | Inventory Change Request for Set 76904-1 | Viewed: | 17 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 69729pb030R Black Tile 2 x 6 with Honeycomb, White 'GE', 'SRT', Rivets and Red Stripes Pattern Model Right Side (Sticker) - Set 76904 (Counterpart)
* Add 1 Part 69729pb029R Black Tile 2 x 6 with Honeycomb, White 'DOD' Pattern Model Right Side (Sticker) - Set 76904 (Counterpart)
* Add 1 Part 69729pb029L Black Tile 2 x 6 with Honeycomb, White 'DO' and Rivets Pattern Model Left Side (Sticker) - Set 76904 (Counterpart)
* Add 1 Part 69729pb030L Black Tile 2 x 6 with Honeycomb, White 'DGE', 'SRT' and Red Stripes Pattern Model Left Side (Sticker) - Set 76904 (Counterpart)
* Add 1 Part 69729pb018 Black Tile 2 x 6 with Honeycomb with Yellow Hexagons Pattern (Sticker) - Set 76904 (Counterpart)
* Add 1 Part 69729pb017 Black Tile 2 x 6 with Honeycomb with 14 Yellow Hexagons Pattern (Sticker) - Set 76904 (Counterpart)
* Add 1 Part 69729pb016 Black Tile 2 x 6 with Honeycomb with 5 Yellow Hexagons Pattern (Sticker) - Set 76904 (Counterpart)
* Add 2 Part 69729pb019 Black Tile 2 x 6 with Honeycomb Pattern (Sticker) - Set 76904 (Counterpart)
* Add 1 Part 87079pb1070 Black Tile 2 x 4 with Honeycomb Pattern (Sticker) - Set 76904 (Counterpart)
* Add 2 Part 3069bpb1012 Black Tile 2 x 2 with Groove with Angry Bee Pattern (Sticker) - Set 76904 (Counterpart)
* Add 4 Part 3068bpb1935 Black Tile 2 x 2 with Groove with Angry Bee and White '1320' Pattern (Sticker) - Set 76904 (Counterpart)
* Add 1 Part 4162pb256 Black Tile 1 x 8 with White 'DODGE' and Red Stripes Pattern (Sticker) - Set 76904 (Counterpart)
* Add 1 Part 4162pb255 Black Tile 1 x 8 with White '1320' Pattern (Sticker) - Set 76904 (Counterpart)
* Add 1 Part 4162pb264R Dark Purple Tile 1 x 8 with Black Stripe, 'T/A' and Silver Car Door Handle Pattern Model Right Side (Sticker) - Set 76904 (Counterpart)
* Add 1 Part 4162pb264L Dark Purple Tile 1 x 8 with Black Stripe, 'T/A' and Silver Car Door Handle Pattern Model Left Side (Sticker) - Set 76904 (Counterpart)
* Add 2 Part 63864pb181 Black Tile 1 x 3 with White 'MOPAR.' Pattern (Sticker) - Set 76904 (Counterpart)
* Add 1 Part 63864pb182 Black Tile 1 x 3 with Silver Grille and 'Challenger T/A' Pattern (Sticker) - Set 76904 (Counterpart)
* Add 1 Part 3069bpb1014 Trans-Clear Tile 1 x 2 with Groove with Silver 'DODGE' Pattern (Sticker) - Set 76904 (Counterpart)
* Add 1 Part 3069bpb1013 Black Tile 1 x 2 with Groove with Honeycomb Pattern (Sticker) - Set 76904 (Counterpart)
* Add 1 Part 85970pb033R Black Slope, Curved 10 x 1 with Angry Bee, Honeycomb and Tires Pattern Model Right Side (Sticker) - Set 76904 (Counterpart)
* Add 1 Part 85970pb033L Black Slope, Curved 10 x 1 with Angry Bee, Honeycomb and Tires Pattern Model Left Side (Sticker) - Set 76904 (Counterpart)
* Add 1 Part 42918pb08R Black Slope, Curved 8 x 2 with Angry Bee and Honeycomb Pattern Model Right Side (Sticker) - Set 76904 (Counterpart)
* Add 1 Part 42918pb08L Black Slope, Curved 8 x 2 with Angry Bee and Honeycomb Pattern Model Left Side (Sticker) - Set 76904 (Counterpart)
* Add 1 Part 15068pb392R Dark Purple Slope, Curved 2 x 2 with Black Stripe with Rounded Corner Pattern Model Right Side (Sticker) - Set 76904 (Counterpart)
* Add 1 Part 15068pb392L Dark Purple Slope, Curved 2 x 2 with Black Stripe with Rounded Corner Pattern Model Left Side (Sticker) - Set 76904 (Counterpart)
* Add 2 Part 15068pb391 Dark Purple Slope, Curved 2 x 2 with Black '340 SIX PAK' Pattern (Sticker) - Set 76904 (Counterpart)
* Add 1 Part 85984pb337 Black Slope 30 1 x 2 x 2/3 with Silver 'Challenger T/A' Pattern (Sticker) - Set 76904 (Counterpart)
* Add 1 Part 85984pb336 Black Slope 30 1 x 2 x 2/3 with Black 'T/A-70' on Bright Light Orange Background Pattern (Sticker) - Set 76904 (Counterpart)
* Add 1 Part 3005pb055R Dark Purple Brick 1 x 1 with Black Trapezoid Stripe Pattern Model Right Side (Sticker) - Set 76904 (Counterpart)
* Add 1 Part 3005pb055L Dark Purple Brick 1 x 1 with Black Trapezoid Stripe Pattern Model Left Side (Sticker) - Set 76904 (Counterpart)
|
|
Author: | here4bricks614 | Posted: | May 1, 2022 02:05 | Subject: | Re: Inventory Change Request for Set 9247-2 | Viewed: | 22 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyipp writes:
| In Inventories Requests, TakeAbricK writes:
| So far the 1-piece wheels came in sets starting 2011, but I have no idea how
long this set was in production. Does the box show a copyright after 2006?
|
All the Boxes say 2006
| Did the Bicycle come assembled or in separate parts?
All 4719c02 are listed in inventories as separate parts, with the complete bicycle
as counterpart.
|
Neither of the 1 piece and 2 piece bikes came assembled this time.
The 5 sets I opened in 2020 were all assembled, and were all 2 piece wheels.
| I did notice that the 2-piece wheels are still in the inventory of
Wondering if the 1-piece wheel came far before 2011 already. It was added to
the catalog March 25, 2015, while set 9348-1 was inventoried February 19, 2011.
Paul added the 1-piece wheels as alternate in 2016. Wondering if the 2-piece
wheels ever came in this set.
Diana
|
I opened 31 of the 9348 last year and 6 of the bikes were 2 piece wheels.
To add to this confusion 39 of the 310 heads were c variant in 9247-2.
|
Can you spot a 7-digit number anywhere near the barcodes? Are either of them
4598355?
|
|
Author: | yorbrick | Posted: | May 1, 2022 02:02 | Subject: | Re: Selling dismembered heads: good idea? | Viewed: | 31 times | Topic: | Selling | |
| In Selling, mkim05 writes:
| Hello experienced sellers!
I have mostly kept my minifigs/minidolls intact... but I have piles of "Friends"
and "City" minifigs that have not moved at all.
However, recently I did have a few random extra "pants" pieces that sold out,
which I thought was odd.
There's a weird part of me that doesn't like selling dismembered heads,
legs or torsos (for reasons silly and less silly).
I think I had seen somewhere else on the forums that full minifigs always sell
better than parts... but I'm not sure if the person who wants 20 of the same
minidoll is going to find my store before I die.
I'd appreciate any advice! Thanks!
Mike
|
If you have 20 of the same minifig, then list roughly half as parts unless it
is a valuable figure that doesn't have much sales volume if sold as parts.
|
|
Author: | randyipp | Posted: | May 1, 2022 01:49 | Subject: | Re: Inventory Change Request for Set 9247-2 | Viewed: | 21 times | Topic: | Inventories Requests | |
| In Inventories Requests, TakeAbricK writes:
| So far the 1-piece wheels came in sets starting 2011, but I have no idea how
long this set was in production. Does the box show a copyright after 2006?
|
All the Boxes say 2006
| Did the Bicycle come assembled or in separate parts?
All 4719c02 are listed in inventories as separate parts, with the complete bicycle
as counterpart.
|
Neither of the 1 piece and 2 piece bikes came assembled this time.
The 5 sets I opened in 2020 were all assembled, and were all 2 piece wheels.
| I did notice that the 2-piece wheels are still in the inventory of
Wondering if the 1-piece wheel came far before 2011 already. It was added to
the catalog March 25, 2015, while set 9348-1 was inventoried February 19, 2011.
Paul added the 1-piece wheels as alternate in 2016. Wondering if the 2-piece
wheels ever came in this set.
Diana
|
I opened 31 of the 9348 last year and 6 of the bikes were 2 piece wheels.
To add to this confusion 39 of the 310 heads were c variant in 9247-2.
|
|
Author: | minifig_75 | Posted: | May 1, 2022 01:49 | Subject: | Re: forestman torso 6077 - color of collar | Viewed: | 31 times | Topic: | Catalog | |
| In Catalog, minifig_75 writes:
| Hi all!
So we've had the 6077 forestman set for a long time.
And, both on the instructions AND the Bricklink description, there is a mistake
on the color RED of colar for torso 973p48c01 : it IS REDDISH BROWN, not RED.
It's certified.
thanks
best regards
Soon
|
THANK YOU SO MUCH for all your replies, guys ❤️
Wish you all a great day 😁
|
|
Author: | TakeAbricK | Posted: | May 1, 2022 01:17 | Subject: | Re: Inventory Change Request for Set 4663-1 | Viewed: | 20 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| In Inventories Requests, WoutR writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, WoutR writes:
| In Inventories Requests, here4bricks614 writes:
| Do you own two different shades of ‘Medium Violet’? I still think these flowers
are Green, Dark Pink, Magenta, and Medium Violet.
|
Two shades of "Medium Violet": 112 Medium Bluish Violet and 219 Lilac ("Medium
Reddish Violet")
|
Beautiful!
|
It's my photo. They can be harvested, but I would not know how to upload
them as long as BrickLink still conflates these colours.
|
You can upload one of them first, and I would accept it. After that, you can
upload the second image, and I can add it as an additional image to the color.
|
Randy, this change request is about changing
to
You added the Dark Bluish Gray image of the old one to the catalog, but it looks
like the new Hippo Baby. Did you copy this image from Brickset and is there a
chance the old variant doesn't exist in Dark Bluish Gray and it should have
been the new version from the start?
Or do/did you have the Hippo Baby yourself? In that case: do you know if the
image is correct, for I can't find any Hippo Baby on the internet with those
eyes (except on all copies at Brickset, Bricklink, Brickowl, Rebrickable).
Thanks,
Diana
|
|
Author: | Sadler_Bricks | Posted: | May 1, 2022 01:15 | Subject: | Re: Bionicle parts | Viewed: | 29 times | Topic: | Price Guide | |
| I find that some bionicle parts sell very well
Sadler_bricks
|
Author: | Sadler_Bricks | Posted: | May 1, 2022 01:12 | Subject: | Re: Order numbers | Viewed: | 24 times | Topic: | General | |
| For sure a high number its still on its way
Sadler_bricks
|
Author: | Sadler_Bricks | Posted: | May 1, 2022 01:10 | Subject: | Re: Unfair Feeback | Viewed: | 52 times | Topic: | Feedback | |
| For try and reach out to the buyer sometimes they may understand
Sadler_bricks
|
Author: | TakeAbricK | Posted: | May 1, 2022 01:06 | Subject: | Re: Inventory Change Request for Set 42129-1 | Viewed: | 14 times | Topic: | Inventories Requests | |
| In Inventories Requests, antant7 writes:
| Please make changes to the following inventory:
* Add 4 Part 731c07 Red Technic, Shock Absorber 6.5L - Hard Spring, Tight Coils at Ends (Alternate) (match ID 1)
Comments from Submitter:
My sealed sets came with the new hard spring on the shock absorbers
|
doesn't have a color image in red, could you please add it to the catalog?!
Thanks,
Diana
|
|
Author: | tigerchen | Posted: | May 1, 2022 01:05 | Subject: | want to buy a brand new train | Viewed: | 100 times | Topic: | Buying | |
| Hello everyone
I want to buy a brand new train
4558 4564 4547 4551 7740 7720 7710 7715 7725 7730 7727 7745 7760 7755 7750
If you want to sell any of them, please let me know!
thank you very much
|
Author: | TakeAbricK | Posted: | May 1, 2022 00:27 | Subject: | Re: Please change color image / xref | Viewed: | 22 times | Topic: | Catalog Requests | |
| In Catalog Requests, randyf writes:
| In Catalog Requests, TakeAbricK writes:
| Please move images / xref to Flat Dark Gold for the 2 item below
|
Done.
|
has PCC for Pearl Light Gold, no idea where it comes from
|
Done.
|
Thanks Randy.
I noticed the large images for both shields are gone (noticed it with other parts
in the past). Does it dissapear because of these moves to another color?
Diana
|
|
Author: | TakeAbricK | Posted: | May 1, 2022 00:17 | Subject: | Re: Inventory Change Request for Set 9247-2 | Viewed: | 16 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyipp writes:
| Please make changes to the following inventory:
* Add 3 Part 4719c02 Red Bicycle (1-Piece Wheels) (Alternate) (match ID 4)
* Change 3 Part Red 4719c01 Bicycle (2-Piece Wheels) {match ID 0 to 4}
Comments from Submitter:
From sealed sets (trying again)
|
So far the 1-piece wheels came in sets starting 2011, but I have no idea how
long this set was in production. Does the box show a copyright after 2006?
Did the Bicycle come assembled or in separate parts?
All 4719c02 are listed in inventories as separate parts, with the complete bicycle
as counterpart.
I did notice that the 2-piece wheels are still in the inventory of
Wondering if the 1-piece wheel came far before 2011 already. It was added to
the catalog March 25, 2015, while set 9348-1 was inventoried February 19, 2011.
Paul added the 1-piece wheels as alternate in 2016. Wondering if the 2-piece
wheels ever came in this set.
Diana
|
|
Author: | SurplusParts | Posted: | May 1, 2022 00:14 | Subject: | Re: Selling dismembered heads: good idea? | Viewed: | 29 times | Topic: | Selling | |
| In Selling, mkim05 writes:
| Hello experienced sellers!
I have mostly kept my minifigs/minidolls intact... but I have piles of "Friends"
and "City" minifigs that have not moved at all.
However, recently I did have a few random extra "pants" pieces that sold out,
which I thought was odd.
There's a weird part of me that doesn't like selling dismembered heads,
legs or torsos (for reasons silly and less silly).
I think I had seen somewhere else on the forums that full minifigs always sell
better than parts... but I'm not sure if the person who wants 20 of the same
minidoll is going to find my store before I die.
I'd appreciate any advice! Thanks!
Mike
|
I sell a lot of minfigure parts. They sell really well for me but you need to
have a good range. Often you won't sell any for a while and then one buyer
will buy a lot.
At first i didn't sell the parts, only the figures. But after a while, when
i started parting out lots of the same set (4+ copies), i would add a couple
of complete figures, and then the rest in parts. It gives you a mix of both
options.
It will also give your inventory a boost which helps with sales.
|
|
Author: | calebfishn | Posted: | May 1, 2022 00:01 | Subject: | Re: Selling dismembered heads: good idea? | Viewed: | 41 times | Topic: | Selling | |
| In the past week I've had several orders for heads, torsos, and legs. |
|