BrickLink Discussion Forum

Status:

Open

Hello,

It came to my attention that the following parts Pin006 & pin005 are only listed
in the color red. Although there are much more colors: green, blue, white, silver,
yellow and black. I hope these could be added!

Yours sincerely,
Hendrik Brands

Author:

BricksThatStick

Posted:

May 15, 2020 18:05

Subject:

Re: Part marked for deletion

Viewed:

54 times

Topic:

In Catalog Requests, bengreen28 writes:

Hi, I have a 1x2 plate that has a sticker on it, I have gone to list it and have
found that it is marked for deletion because the sticker was applied to the wrong
part.
I have got this model at home and also have the instructions for it. the sticker
has been applied to the correct part as it shows it clearly on the instructions.
Who do we contact in order to get the deletion cancelled?
Part number is 3023pb01, you can see clearly in the picture that the sticker
is applied to the 1x2 plate and not the mudguard.

Here is the thread from when it was removed from the inventory:

https://www.bricklink.com/messageThread.asp?ID=253659

The sticker now forms this assembly:

BA081pb01 Stickered Assembly 4 x 2 x 1 with 'Shell' Small Pattern on Both Sides (Stickers) - Set 6634 - 2 Plate 1 x 2, 1 Mudguard 2 x 4 with Arch Studded
Parts: Stickered Assembly

So the sticker is in the correct place but it covers more than 1 part (admittedly
only just)

Author:

bengreen28

Posted:

May 15, 2020 16:56

Subject:

Part marked for deletion

Viewed:

94 times

Topic:

Status:

Open

Author:

Adjour

Posted:

May 15, 2020 12:00

Subject:

Re: Can I see Imperial units for Catalog entries?

Viewed:

30 times

Topic:

In Catalog, paulvdb writes:

In Catalog, Yo_Yo_Flamingo writes:

Is there any way for me to view the weight/dimensions of a set from its catalog
entry in Imperial units (pounds/inches- ghastly, I know, but I live in America)?
I commonly use this when quoting shipping for a buyer so I don't have to
dig out a set every time someone asks, but it is always a little bit of hassle
to convert grams to pounds and cm to inches.

https://www.bricklink.com/catalogOptions.asp?viewFrom=P

Omg thank you.

Author:

popsicle

Posted:

May 15, 2020 10:57

Subject:

Re: Can I see Imperial units for Catalog entries?

Viewed:

48 times

Topic:

In Catalog, paulvdb writes:

In Catalog, Yo_Yo_Flamingo writes:

https://www.bricklink.com/catalogOptions.asp?viewFrom=P

I'm a little surprised that TLG has keep that in place, as global-minded
as they are. Not complaining, I also appreciate the ability to use the system
that's more intuitive for me.

Author:

Yo_Yo_Flamingo

Posted:

May 15, 2020 10:48

Subject:

Re: Can I see Imperial units for Catalog entries?

Viewed:

21 times

Topic:

In Catalog, paulvdb writes:

In Catalog, Yo_Yo_Flamingo writes:

https://www.bricklink.com/catalogOptions.asp?viewFrom=P

You're amazing, Mate! Thanks 3000!

Author:

paulvdb

Posted:

May 15, 2020 10:47

Subject:

Re: Can I see Imperial units for Catalog entries?

Viewed:

36 times

Topic:

https://www.bricklink.com/catalogOptions.asp?viewFrom=P

In Catalog, Yo_Yo_Flamingo writes:

Author:

Yo_Yo_Flamingo

Posted:

May 15, 2020 10:39

Subject:

Can I see Imperial units for Catalog entries?

Viewed:

74 times

Topic:

Status:

Open

Author:

StormChaser

Posted:

May 15, 2020 10:21

Subject:

Re: White sheep problem

Viewed:

37 times

Topic:

In Catalog, Soviet writes:

What to do, I wonder?

Send in the new sheep and we'll figure out a title for it.

Author:

Soviet

Posted:

May 15, 2020 09:26

Subject:

White sheep problem

Viewed:

111 times

Topic:

Status:

Open

Hey, I'm trying to help with the 21159 set, but it would be my first inventory
job, so I'm hitting a block early on.

It looks like the set has one of those:

minesheep04 (Inv) Minecraft Sheep, Red, Sheared - Brick Built
Parts: Animal, Land

but in white. Meanwhile, the name "Minecraft Sheep, White - Brick Built" is already
taken by:

minesheep01 (Inv) Minecraft Sheep, White, Plate 2 x 2 on Back - Brick Built
Parts: Animal, Land

which has a different build (plates instead of brick). What to do, I wonder?

Author:

enig

Posted:

May 13, 2020 17:22

Subject:

Re: 2555 - even more variants

Viewed:

50 times

Topic:

In Catalog, edeevo writes:

In Catalog, enig writes:

Happy day

The time that is spent differentiating between mold variants is
certainly not worth it money-wise, but worth it in other ways.

A customer purchased some classic 2555's. Apparently we still sent two different
variants to him. Sure, most of the older parts have various mini-differences,
just never thought anyone would actually care about getting a specific variant.
Either way, I was not aware of this particular difference.

Our customer described it as 'The wider ones and the narrower ones' and
sent us a picture, circling the different variants. A bit hard to see, I am attaching
one more.

The difference itself is in the sharpness of the outside/inside edges - the very
tops the clips. Principally kind of similar to the difference between classic
and modern 2555, except much more subtle. Difficult to judge if looking at the
edge itself, but becomes easy when comparing from the top view. At least when
you have two pieces to compare

The left one has, call it, completely sharp edge. The right one has a slight
roundness to it. That rounding comes at a cost of reducing the top surface area
of the clip.

Complete list of the differences between the two:

The 'flat top' type:
* Sharper edge / bigger top surface area of the clip
* mold pip on a side
* now looking from yet another side, the sidewall of the clip is completely straight
in all dimensions - does not get narrower towards the top and forms a straight
rectangle (the last picture)

The 'slightly slightly rounded top'
* Slightly rounded top edge of the clip, reduced flat surface area of the top
* mold pip at the bottom
* sidewall is of slightly concave shape - forms a trapezoid

Some more differences, but only concerns the construction of the mold and the
ejection pins placement.

Question(s).
1 - How many of you have/have not noticed this particular difference before?
Curious.

2 - any other different classic 2555s than these two?

I'd say it's pretty commonly known; the squared-top kind are the older
type, whereas the rounded-top kind are newer (the catalog entry has a note indicating
the difference)...

I actually keep the two types separated in my inventory in anticipation of a
new entry for each--which will likely never happen--but having each type
together really helps me to give a Buyer the same type whenever they buy any.

Life is Good.
~Ed.

Yeah that's how my employee was looking at this too. We nearly got into an
actual argument over this haha.

It's not the BL described difference that I am talking about. The key part
addressing this in the OP is:

The difference itself is in the sharpness of the outside/inside edges - the
very tops the clips. Principally kind of similar to the difference between classic
and modern 2555, except much more subtle.

Will get back to this tomorrow I guess, with more pictures comparing these to
the newer 2555s.

Author:

edeevo

Posted:

May 13, 2020 17:05

Subject:

Re: 2555 - even more variants

Viewed:

49 times

Topic:

In Catalog, enig writes:

Happy day

I'd say it's pretty commonly known; the squared-top kind are the older
type, whereas the rounded-top kind are newer (the catalog entry has a note indicating
the difference)...

Life is Good.
~Ed.

Author:

James2506

Posted:

May 13, 2020 16:47

Subject:

Re: Why oh why Batman Sh016b

Viewed:

49 times

Topic:

Thanks!

I built myself an Sh016b today using spare parts from my other figures so your
method has its benefits - i dont have to keep buying new sets - although i do
own the SDCC Gotham Skyline set - just refuse to open it.

James

In Catalog, Hygrotus writes:

In Catalog, James2506 writes:

So in the coming summer sets for DC Batman we are getting another black Sh016
batman but a new cape (very cool looking glide cape) - so we should expect Sh016c
in the Penguin Boat Chase.

In set 75168 will be new number for Batman as cape has totally different shape
so this will be Batman assembly with new part not being varian of previous capes
This cape isn't a varian to capes

56630 Minifigure Cape Cloth with Top Holes and Scalloped 5 Points Bottom (Batman), Long, Circle Neck Cut - Traditional Starched Fabric
Parts: Minifigure, Body Wear {Black}

and
[p=56630b,11]
and

19185 Minifigure Cape Cloth with Top Holes and Scalloped 5 Points Bottom (Batman), Long, Circle Neck Cut - Spongy Stretchable Fabric
Parts: Minifigure, Body Wear {Black}

New part in assembly not part variant so new number not a, b or c

We are also getting another dark grey batman with
gold outline belt with the same new cape so he should get Sh589a in the Mobile
Bat Base and Joker Trike Chase. Interestingly they are releasing these with
3 capes in each set so are we going to get 3 variants in a single set!!!! Oh
my head hurts.

For other two Batman sets policy is clear only one minfig can be accepted in
assembly as showed firstly in building instruction. So when minfig has in alternates
for it assembly only fisrt showed version in instruction is approved.
For example

Minifig No: sw0931 Name: Poe Dameron (Pilot Jumpsuit, Hair Swept Left Tousled)

sw0931 (Inv) Poe Dameron (Pilot Jumpsuit, Hair Swept Left Tousled)
Minifigures: Star Wars: Star Wars Episode 7

in set

75273-1 (Inv) Poe Dameron's X-wing Fighter
744 Parts, 4 Minifigures, 2020
Sets: Star Wars: Star Wars Episode 9

can be with hair or helmet.
but in instruction
https://www.lego.com/biassets/bi/6310759.pdf
it is firstly showed assembled with hair then with helmet
so only with hair is being accepted for this set, we don't crate second entry
with helmet.

Author:

enig

Posted:

May 13, 2020 16:26

Subject:

2555 - even more variants

Viewed:

122 times

Topic:

Status:

Open

Happy day

Author:

yorbrick

Posted:

May 13, 2020 16:19

Subject:

Re: Category Definitions Discussion - Parts P - R

Viewed:

28 times

Topic:

In Catalog, StormChaser writes:

In Catalog, yorbrick writes:

I don't think the definitions should be so focussed.

I've modified the Propeller definition to this:

For items with circularly-spinning blades, including accessories and component
parts.

30194 Minifigure, Utensil Tool Circular Blade Saw
Parts: Minifigure, Utensil

Author:

bje

Posted:

May 13, 2020 15:06

Subject:

Re: Category Definitions Discussion - Parts V-

Viewed:

33 times

Topic:

In Catalog, SylvainLS writes:

In Catalog, bje writes:

[…]
Wheel - For items that is a solid disk or a rigid circular ring connected
by spokes to a hub, designed to turn, which may or may not fit tire and tread.

Hmm, those are wheels:

874 Vehicle, Tractor Chassis Steering Wheel
Parts: Vehicle

3736 Technic, Steering Pulley Large
Parts: Technic, Steering

2741 Technic, Steering Wheel Large
Parts: Technic, Steering

2819 Technic, Steering Wheel Small, 3 Studs Diameter
Parts: Technic, Steering

30633 Windscreen 4 x 6 x 4 Canopy with Hinge
Parts: Windscreen

and fit your description but I’m not sure we’d want them in the Wheel category

Me neither, Let me sleep on it though

snip

Dang. No one ever agree with anyone, not even lexicologists.

(French “véhicule” (the etymon) admits the “extended” usages.)

And in Afrikaans (voertuig) any mobile machine used for transport.... which can
makes things easier or more difficult

Author:

SylvainLS

Posted:

May 13, 2020 14:28

Subject:

Re: Category Definitions Discussion - Parts V-

Viewed:

27 times

Topic:

In Catalog, SylvainLS writes:

[…]

30663 Vehicle, Steering Wheel Small, 2 Studs Diameter
Parts: Vehicle

not 30633

Author:

SylvainLS

Posted:

May 13, 2020 14:26

Subject:

Re: Category Definitions Discussion - Parts V-

Viewed:

33 times

Topic:

In Catalog, bje writes:

[…]
Wheel - For items that is a solid disk or a rigid circular ring connected
by spokes to a hub, designed to turn, which may or may not fit tire and tread.

Hmm, those are wheels:

874 Vehicle, Tractor Chassis Steering Wheel
Parts: Vehicle

3736 Technic, Steering Pulley Large
Parts: Technic, Steering

2741 Technic, Steering Wheel Large
Parts: Technic, Steering

2819 Technic, Steering Wheel Small, 3 Studs Diameter
Parts: Technic, Steering

30633 Windscreen 4 x 6 x 4 Canopy with Hinge
Parts: Windscreen

and fit your description but I’m not sure we’d want them in the Wheel category

[…]
2. A vehicle is by definition only something with wheels for land transport.
Consider rather moving the aircraft section out.

By which definition?

A vehicle is a means of transporting, carrying, something or someone. I don’t
see anything preventing vehicle to be used for aircrafts or boats.

Indeed, this is from WP ( https://en.wikipedia.org/wiki/Vehicle ):
“A vehicle (from Latin: vehiculum[1]) is a machine that transports people or
cargo. Vehicles include wagons, bicycles, motor vehicles (motorcycles, cars,
trucks, buses), railed vehicles (trains, trams), watercraft (ships, boats), amphibious
vehicles (screw-propelled vehicle, hovercraft), aircraft (airplanes, helicopters)
and spacecraft.[2]”
The references are [1] OED and [2] MacMillan Contemporary Dictionary.

Dang. No one ever agree with anyone, not even lexicologists.

(French “véhicule” (the etymon) admits the “extended” usages.)

Also, we have aircraft and boat sections, which presumably should exclude those
from being in another section.

Okay.

Author:

StormChaser

Posted:

May 13, 2020 14:07

Subject:

Re: Category Definitions Discussion - Parts P - R

Viewed:

31 times

Topic:

In Catalog, yorbrick writes:

I don't think the definitions should be so focussed.

I've modified the Propeller definition to this:

For items with circularly-spinning blades, including accessories and component
parts.

Author:

StormChaser

Posted:

May 13, 2020 14:06

Subject:

Re: Category Definitions Discussion - Plate

Viewed:

32 times

Topic:

In Catalog, bje writes:

Plate - For items nearly identical in use to building bricks that are one
third as tall, have one or more studs, and for which all corners are square.

Thank you for pointing out the problem with the current definition. We'll
keep hammering away at these until we get them right.

I have modified it to this:

For items similar to building bricks that are one third as tall, have top surfaces
evenly covered in studs, and for which all corners are square.

Will this better define what should be a plate?

Author:

bje

Posted:

May 13, 2020 13:57

Subject:

Re: Category Definitions Discussion - Parts V-

Viewed:

31 times

Topic:

In Catalog, SylvainLS writes:

In Catalog, bje writes:

[…]
Wheel - For items that is a solid disk or a rigid circular ring connected
by spokes to a hub, designed to turn around an axle passed through the centre,
which may or may not fit tire and tread. Note 6

Potential problem with “axle”: it could be understood as “Technic axle.”
Maybe it should be amended with examples, like “(Technic axle, Technic pin, or
wheel pin).”

Hmm, you are right, I was trying to move away from the hub idea. Maybe leave
off the axle part altogether then:
Wheel - For items that is a solid disk or a rigid circular ring connected

by spokes to a hub, designed to turn, which may or may not fit tire and tread.

[…]
2. A vehicle is by definition only something with wheels for land transport.
Consider rather moving the aircraft section out.

Vehicle noun (MACHINE)
B1 [ C ] formal
a machine, usually with wheels and an engine, used for transporting people or
goods on land, especially on roads
Cambridge English Dictionary set to US English specifically

Also, we have aircraft and boat sections, which presumably should exclude those
from being in another section.

Author:

Hygrotus

Posted:

May 13, 2020 13:49

Subject:

Re: Why oh why Batman Sh016b

Viewed:

56 times

Topic:

In Catalog, James2506 writes:

So in the coming summer sets for DC Batman we are getting another black Sh016
batman but a new cape (very cool looking glide cape) - so we should expect Sh016c
in the Penguin Boat Chase.

In set 75168 will be new number for Batman as cape has totally different shape
so this will be Batman assembly with new part not being varian of previous capes
This cape isn't a varian to capes

56630 Minifigure Cape Cloth with Top Holes and Scalloped 5 Points Bottom (Batman), Long, Circle Neck Cut - Traditional Starched Fabric
Parts: Minifigure, Body Wear {Black}

and
[p=56630b,11]
and

19185 Minifigure Cape Cloth with Top Holes and Scalloped 5 Points Bottom (Batman), Long, Circle Neck Cut - Spongy Stretchable Fabric
Parts: Minifigure, Body Wear {Black}

New part in assembly not part variant so new number not a, b or c

sw0931 (Inv) Poe Dameron (Pilot Jumpsuit, Hair Swept Left Tousled)
Minifigures: Star Wars: Star Wars Episode 7

in set

75273-1 (Inv) Poe Dameron's X-wing Fighter
744 Parts, 4 Minifigures, 2020
Sets: Star Wars: Star Wars Episode 9

Author:

SylvainLS

Posted:

May 13, 2020 13:44

Subject:

Re: Category Definitions Discussion - Parts V-

Viewed:

28 times

Topic:

In Catalog, bje writes:

Potential problem with “axle”: it could be understood as “Technic axle.”
Maybe it should be amended with examples, like “(Technic axle, Technic pin, or
wheel pin).”

[…]
2. A vehicle is by definition only something with wheels for land transport.
Consider rather moving the aircraft section out.

Author:

James2506

Posted:

May 13, 2020 13:16

Subject:

Re: Why oh why Batman Sh016b

Viewed:

46 times

Topic:

So in the coming summer sets for DC Batman we are getting another black Sh016
batman but a new cape (very cool looking glide cape) - so we should expect Sh016c
in the Penguin Boat Chase. We are also getting another dark grey batman with
gold outline belt with the same new cape so he should get Sh589a in the Mobile
Bat Base and Joker Trike Chase. Interestingly they are releasing these with
3 capes in each set so are we going to get 3 variants in a single set!!!! Oh
my head hurts.

Thanks

In Catalog, Hygrotus writes:

In Catalog, axaday writes:

In Catalog, James2506 writes:

I think each variant should get a fresh number. Certainly the faces do even
though the rest of the fig remains the same. It just happened with Mr Freeze
too - the dark Peary grey now has two unique numbers when all that changed was
the neck bracket and weapon.

How do we ask Admins to consider changing the naming first given?

I am sure an admin will see this thread.

It's not a for sure thing. They also have to weigh in how it will affect
stores to have the name change. They may have labelled things. Just adding
a or b on the end is much gentler for that.

When minfigs assembly is exactly the same but there is just one minior change
in part variant minfigs is classified as variant minfig and gets a or b or c
if there are more variants.

In Batman case all three are the same just one part is in differnt part variant
in sh016 and sh016a and now sh016b is the same assembly as sh016a just cape is
in diffrent part variant. It is a quite common practice (not always consistent,
but I try to keep it consistent)

Minfigs gest new number when assembly is diffrent for example wjhen for this
Batmon would be added totally differnt part

Example with Mr Freeze is good it got nee number as assembly is different, this
minfig has additiona parts so it makes an assembly different.

so few example

Minifig No: sw0004 Name: Darth Vader (Light Gray Head)

sw0004 (Inv) Darth Vader (Light Gray Head)
Minifigures: Star Wars: Star Wars Episode 4/5/6

Minifig No: sw0004a Name: Darth Vader (Light Bluish Gray Head)

sw0004a (Inv) Darth Vader (Light Bluish Gray Head)
Minifigures: Star Wars: Star Wars Episode 4/5/6

assembly the same just the head has different color

Minifig No: sw0636 Name: Darth Vader (Type 2 Helmet)

sw0636 (Inv) Darth Vader (Type 2 Helmet)
Minifigures: Star Wars: Star Wars Episode 4/5/6

Minifig No: sw0636b Name: Darth Vader (Type 2 Helmet, Spongy Cape)

sw0636b (Inv) Darth Vader (Type 2 Helmet, Spongy Cape)
Minifigures: Star Wars

assembly the same just cape variant changed

but

Minifig No: sw0744 Name: Darth Vader (White Head, Rebels)

sw0744 (Inv) Darth Vader (White Head, Rebels)
Minifigures: Star Wars: Star Wars Rebels

Minifig No: sw0834 Name: Darth Vader (Light Nougat Head, Plain Arms)

sw0834 (Inv) Darth Vader (Light Nougat Head, Plain Arms)
Minifigures: Star Wars

new numbers as totally different heads are in there

but when print on the head si only small variation minfig is consider also variant
and gets an a

Minifig No: trn227 Name: Overalls with Tools in Pocket, Blue Legs, Red Short Bill Cap, Glasses with Brown Thin Eyebrows

trn227 (Inv) Overalls with Tools in Pocket, Blue Legs, Red Short Bill Cap, Glasses with Brown Thin Eyebrows
Minifigures: Train

Minifig No: trn227a Name: Overalls with Tools in Pocket, Blue Legs, Red Short Bill Cap, Glasses with Red Thin Eyebrows

trn227a (Inv) Overalls with Tools in Pocket, Blue Legs, Red Short Bill Cap, Glasses with Red Thin Eyebrows
Minifigures: Train

brown eybrows vs red eyebrows, very minor difference beside that minfigs are
identical

recently added

twt002 (Inv) Poppy
Minifigures: Trolls World Tour

Minifig No: twt005 Name: Poppy with Cupcake

twt005 (Inv) Poppy with Cupcake
Minifigures: Trolls World Tour

Minifig No: twt009 Name: Poppy with Cupcake and Swirl

twt009 (Inv) Poppy with Cupcake and Swirl
Minifigures: Trolls World Tour

these have different numbers as they are different assemblies, every one have
additional parts there, but for example if suddenly LEGO would start produce
cupcae in different mold variant and it would be discovered then one with mold
variant of such part would get variant with the same number and added a

when you look through catalog teher really a lot of "a" and "b" variants of minifigs
in very different themes

So important is how significant if change of similar character or minfigs. Slight
change, only different part variant but whole assembly the same. This is minfig
variant with the same number but with a added. Only slight change in prinbt also
only a variant. Significant print change or aditional parts added which makes
it different assembty, new number.

some more examples

Minifig No: sw0250 Name: Crix Madine, Dark Tan Hips and Legs

sw0250 (Inv) Crix Madine, Dark Tan Hips and Legs
Minifigures: Star Wars: Star Wars Episode 4/5/6

Minifig No: sw0250a Name: Crix Madine, Tan Hips and Legs

sw0250a (Inv) Crix Madine, Tan Hips and Legs
Minifigures: Star Wars: Star Wars Episode 4/5/6

Minifig No: sw0441 Name: Droideka (Destroyer Droid) - Pearl Dark Gray Arms Mechanical

sw0441 (Inv) Droideka (Destroyer Droid) - Pearl Dark Gray Arms Mechanical
Minifigures: Star Wars: Star Wars Episode 2

Minifig No: sw0441a Name: Droideka (Destroyer Droid) - Flat Silver Arms Mechanical

sw0441a (Inv) Droideka (Destroyer Droid) - Flat Silver Arms Mechanical
Minifigures: Star Wars: Star Wars The Clone Wars

Minifig No: sw0527 Name: Astromech Droid, R2-D2, Flat Silver Head, Red Dots and Small Receptor

sw0527 (Inv) Astromech Droid, R2-D2, Flat Silver Head, Red Dots and Small Receptor
Minifigures: Star Wars

Minifig No: sw0527a Name: Astromech Droid, R2-D2, Flat Silver Head, Lavender Dots and Small Receptor

sw0527a (Inv) Astromech Droid, R2-D2, Flat Silver Head, Lavender Dots and Small Receptor
Minifigures: Star Wars

only chane of color of the photoreceptor

Minifig No: sw1085 Name: Astromech Droid, R2-D2, Flat Silver Head, Dark Pink Dots and Large Receptor

sw1085 (Inv) Astromech Droid, R2-D2, Flat Silver Head, Dark Pink Dots and Large Receptor
Minifigures: Star Wars

but here more significant print change

ok there are meny meny more examples

so numeration of those batmans stays as they are as those minfigs hase the same
assemblies only parts are in different mold variants
normal cape vs spongy cape
type of mask also mold variant

the same here only mask mold change

Minifig No: sh025 Name: Batman - Light Bluish Gray Suit with Yellow Belt and Crest, Dark Blue Mask and Cape (Type 1 Cowl)

sh025 (Inv) Batman - Light Bluish Gray Suit with Yellow Belt and Crest, Dark Blue Mask and Cape (Type 1 Cowl)
Minifigures: Super Heroes: Batman II

Minifig No: sh025a Name: Batman - Light Bluish Gray Suit with Yellow Belt and Crest, Dark Blue Mask and Cape (Type 2 Cowl)

sh025a (Inv) Batman - Light Bluish Gray Suit with Yellow Belt and Crest, Dark Blue Mask and Cape (Type 2 Cowl)
Minifigures: Super Heroes: Batman II

but here different heads, so different assemblies and new numbers

Minifig No: sh312 Name: Batman - Utility Belt, Head Type 1

sh312 (Inv) Batman - Utility Belt, Head Type 1
Minifigures: Super Heroes: The LEGO Batman Movie

Minifig No: sh318 Name: Batman - Utility Belt, Head Type 2

sh318 (Inv) Batman - Utility Belt, Head Type 2
Minifigures: Super Heroes: The LEGO Batman Movie

Minifig No: sh329 Name: Batman - Utility Belt, Head Type 3

sh329 (Inv) Batman - Utility Belt, Head Type 3
Minifigures: Super Heroes: The LEGO Batman Movie

(btw name should be change here to get rid of type 1, 2 and 3, describtion of
faces exspressions should be here as all heads have different prints like here
for example https://www.bricklink.com/catalogListOld.asp?pg=1&catString=971&catType=M&v=1)

Hope this is more clear now why ve have minfigs variants marked as a nad b

Author:

bje

Posted:

May 13, 2020 13:12

Subject:

Re: Category Definitions Discussion - Plate

Viewed:

29 times

Topic: