Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | Thisoldtoyhouse | Posted: | Oct 30, 2019 14:39 | Subject: | 15400 shooter | Viewed: | 111 times | Topic: | Catalog | Status: | Open | |
| does anyone know where to find the shooter 15400....used to be 15301....i cannot
find it in bricklink???
harry
|
Author: | Admin_Russell | Posted: | Oct 28, 2019 12:14 | Subject: | Re: assembled parts with stickers | Viewed: | 50 times | Topic: | Catalog | |
| In Catalog, yorbrick writes:
| | This will save you from "running over" a Left / Right pair, e.g.
[p=BA84pb01L]
[p=BA84pb01R]
| By the way, the stickered assemblies have to be renumbered in the near future
to get an extra 0.
|
Yes, that is correct. Good thing we didn't change them before when we added
BrickArms.
|
What does the BA here mean? Is it "brick assembly" or something similar?
|
Yes, "Brick Assembly"
|
|
Author: | Admin_Russell | Posted: | Oct 27, 2019 19:58 | Subject: | Re: assembled parts with stickers | Viewed: | 65 times | Topic: | Catalog | |
| In Catalog, Turez writes:
| In Catalog, Lexesmom writes:
| Ok I found the "sticker over assembly" group but my question is what is the process
to submit it, when I go to add or change then it asks for the part number and
it doesn't have one because its two parts together with a sticker so how
do I submit it for an add to the set?
|
This is how I added a stickered assembly a few weeks ago:
First check if there already is an assembly like yours in the catalog by searching
for "assembly slopes".
Results: https://www.bricklink.com/catalogList.asp?q=assembly%20slopes
As you can see, there is no assembly consisting of two curved slopes 4x1. So
your assembly is a new one. Now check the first free number for assembled parts
with stickers. Open the "Sticker Over Assembly" category and sort by item number:
https://www.bricklink.com/catalogList.asp?pg=1&catString=582&itemBrand=1000&catType=P&v=1
The highest number is BA91pb01, so your part number would be BA92pb01.
To be sure this number is not used for a recent entry, check items pending approval:
https://www.bricklink.com/catalogList.asp?itemPend=Y
No results for "BA92pb01", so you can use this number.
|
Most of the time that will work, but the foolproof way to search is to check
for "BA92*".
This will save you from "running over" a Left / Right pair, e.g.
[p=BA84pb01L]
[p=BA84pb01R]
| By the way, the stickered assemblies have to be renumbered in the near future
to get an extra 0.
|
Yes, that is correct. Good thing we didn't change them before when we added
BrickArms.
|
|
Author: | Turez | Posted: | Oct 27, 2019 17:17 | Subject: | Re: assembled parts with stickers | Viewed: | 52 times | Topic: | Catalog | |
| In Catalog, Lexesmom writes:
| Wow just saw this, thanks for the info I would have never gotten all that on
my own. I assumed that admin would have to give it its own part number I didn't
realize I could do that for them. Maybe I should re submit it? I just submitted
the photo today.
|
I see you resubmitted the part with the correct number and name today.
[p=BA93pb01]
Now just submit your photo to that entry and it will be approved.
And you can delete your previous submission "61678-black" and your photo submitted
to part 61678 at
https://www.bricklink.com/myActivity.asp
or at the bottom of
https://www.bricklink.com/catalogAdd.asp
|
|
Author: | Lexesmom | Posted: | Oct 27, 2019 15:41 | Subject: | Re: assembled parts with stickers | Viewed: | 41 times | Topic: | Catalog | |
| In Catalog, Turez writes:
| In Catalog, Lexesmom writes:
| Ok I found the "sticker over assembly" group but my question is what is the process
to submit it, when I go to add or change then it asks for the part number and
it doesn't have one because its two parts together with a sticker so how
do I submit it for an add to the set?
|
This is how I added a stickered assembly a few weeks ago:
First check if there already is an assembly like yours in the catalog by searching
for "assembly slopes".
Results: https://www.bricklink.com/catalogList.asp?q=assembly%20slopes
As you can see, there is no assembly consisting of two curved slopes 4x1. So
your assembly is a new one. Now check the first free number for assembled parts
with stickers. Open the "Sticker Over Assembly" category and sort by item number:
https://www.bricklink.com/catalogList.asp?pg=1&catString=582&itemBrand=1000&catType=P&v=1
The highest number is BA91pb01, so your part number would be BA92pb01.
To be sure this number is not used for a recent entry, check items pending approval:
https://www.bricklink.com/catalogList.asp?itemPend=Y
No results for "BA92pb01", so you can use this number.
For part name, I would suggest "Stickered Assembly 2 x 4 x 1 with Circled Number
9 Pattern (Sticker) - Set 8159 - 2 Slopes Curved 4 x 1 No Studs"
(I have used the name of similar part BA43pb02 as a template).
If exactly the same assembly (two curved slopes 4x1 in our example) is added
with another sticker later, that assembly will get number BA92pb02 etc. That
means "BAxx" stands for the speficic assembly and "pbxx" stands (as always) for
the sticker or imprint.
By the way, the stickered assemblies have to be renumbered in the near future
to get an extra 0.
Regards,
Jonas
|
Wow just saw this, thanks for the info I would have never gotten all that on
my own. I assumed that admin would have to give it its own part number I didn't
realize I could do that for them. Maybe I should re submit it? I just submitted
the photo today.
|
|
Author: | Admin_Russell | Posted: | Oct 25, 2019 20:49 | Subject: | Re: Set 11915 Nya Water Spider needs added | Viewed: | 56 times | Topic: | Catalog | |
| In Catalog, POPS_BLOCK_SHOP writes:
| When I look up 11915 in bricklink it does not come up. Anyone know why???
|
It doesn't appear to be added to the catalog yet. You can do this yourself
- just use this form:
https://www.bricklink.com/wantedCatalog.asp?catType=S
and model the new entry off of this one:
|
Author: | POPS_BLOCK_SHOP | Posted: | Oct 25, 2019 20:40 | Subject: | Set 11915 Nya Water Spider needs added | Viewed: | 71 times | Topic: | Catalog | Status: | Open | |
| When I look up 11915 in bricklink it does not come up. Anyone know why??? |
|
Author: | normann1974 | Posted: | Oct 25, 2019 18:07 | Subject: | Warped 2x4 plates? | Viewed: | 115 times | Topic: | Catalog | Status: | Open | |
| These warped 2x4 plates have been showing up in some lots I've bought (I've
thrown out about 25 of these during the last couple of months).
They only ever warp in the pip end, and I've seen it only for black, and
never for any other types of plates.
Does anyone know of an explanation?
/Jan
|
|
|
Author: | Stellar | Posted: | Oct 25, 2019 11:25 | Subject: | Re: Trying to add torso gets me 500 error | Viewed: | 26 times | Topic: | Catalog | |
| Thanks for the reply but it was while creating the parts, you upload the picture
after you have already created the parts.
I just tried now and I got to create them correctly and it let me add the image
too.
Thanks,
Sergio
Stellar Bricks
In Catalog, bje writes:
| Reduce the size of your graphic - if it is too big you make BrickLink have 500
seizures
In Catalog, Stellar writes:
| Hello,
I want to create an entry to this new torso and torso assembly.
I tried to add these 2 items:
973pb3703
Torso LEGO World The Netherlands 2019 with Number 19 Pattern
0.82g
973pb3703c01
Torso LEGO World The Netherlands 2019 with Number 19 Pattern / White Arms / Yellow
Hands
1.25g
But I keep getting error 500...
Could someone else try?
Thanks,
Sergio
|
|
|
|
Author: | bje | Posted: | Oct 25, 2019 09:33 | Subject: | Re: Trying to add torso gets me 500 error | Viewed: | 22 times | Topic: | Catalog | |
| Reduce the size of your graphic - if it is too big you make BrickLink have 500
seizures
In Catalog, Stellar writes:
| Hello,
I want to create an entry to this new torso and torso assembly.
I tried to add these 2 items:
973pb3703
Torso LEGO World The Netherlands 2019 with Number 19 Pattern
0.82g
973pb3703c01
Torso LEGO World The Netherlands 2019 with Number 19 Pattern / White Arms / Yellow
Hands
1.25g
But I keep getting error 500...
Could someone else try?
Thanks,
Sergio
|
|
|
Author: | Stellar | Posted: | Oct 25, 2019 09:24 | Subject: | Trying to add torso gets me 500 error | Viewed: | 48 times | Topic: | Catalog | Status: | Open | |
| Hello,
I want to create an entry to this new torso and torso assembly.
I tried to add these 2 items:
973pb3703
Torso LEGO World The Netherlands 2019 with Number 19 Pattern
0.82g
973pb3703c01
Torso LEGO World The Netherlands 2019 with Number 19 Pattern / White Arms / Yellow
Hands
1.25g
But I keep getting error 500...
Could someone else try?
Thanks,
Sergio
|
|
Author: | Admin_Russell | Posted: | Oct 23, 2019 20:41 | Subject: | Re: Upgrade for Forum / Message macro tags | Viewed: | 87 times | Topic: | Catalog | |
| In Catalog, maxx3001 writes:
| In Catalog, Admin_Russell writes:
| We have tweaked the Forum / Message macro tags in the following ways:
|
Nice, but now the links to the parts don’t work.......
So, maybe not that usefull?
|
This bug has already been fixed but it isn't live yet. We are also adding
the color name to the macro tag.
|
|
Author: | Crafteewon | Posted: | Oct 21, 2019 00:38 | Subject: | Re: sw0620 Tusken Raider | Viewed: | 57 times | Topic: | Catalog | |
| In Catalog, AZbrickGUY writes:
| Hey all,
Has anyone else ran into this? I have a sw0620 Tusken Raider mini but without
the markings on his shirt. He is super mint looking and doesn't look like
they have been removed. I will try to take a pic of him to show. So, has anyone
else ran into this one?? Thanks for any info.
|
I found that 2 of the 6 I have do not shown the markings on the front although
they both have them on the back.
They are not clones as they have lego stamps and I parted them out new from sets
myself. I parted them from two different sets. The battlepack and the speeder
so unsure which one they came from.
|
|
|
Author: | axaday | Posted: | Oct 19, 2019 19:05 | Subject: | Re: Same sticker sheet listed multiple times | Viewed: | 50 times | Topic: | Catalog | |
| Would your software still work if there were one entry with 5 alternate part
numbers?
n Catalog, Teup writes:
| In Catalog, randyipp writes:
| In Catalog Requests, Teup writes:
| In Catalog Requests, randyipp writes:
| Any reason there are 6 entries for the same sticker sheet? Can the name not
contain all the different sets it comes from?
[p=8777stk01]
[p=8778stk01]
[p=8779stk01]
[p=8780stk01]
[p=8799stk01]
[p=8800stk01]
|
I prefer it this way. It's a rare occurrence and changing it would save only
a few entries while making the entire sticker sheet database inconsistent.
I see how it can be a problem when you're looking to buy one, but I wonder
how often this really happens?
|
So are you saying it is preferable for the database but not for buying and selling.
This seems like the better solution?
Would you have 6 entries on your own webshop?
|
Well, buyers seem OK with puzzling around with minifigs buying them either whole
or in parts. That's also a situation where people are searching for two things
in parallel that come down to the same thing and it's much more common.
It would mess up my syncing software, for one thing. And I think generally item
names being adaptable depending on what is released next is not a good situation.
So yeah, if I can choose, I'd have multiple entries, but that's just
my opinion.
|
|
|
Author: | Cob | Posted: | Oct 19, 2019 17:38 | Subject: | Re: sw0620 Tusken Raider | Viewed: | 45 times | Topic: | Catalog | |
| In Catalog, AZbrickGUY writes:
| Hey all,
Has anyone else ran into this? I have a sw0620 Tusken Raider mini but without
the markings on his shirt. He is super mint looking and doesn't look like
they have been removed. I will try to take a pic of him to show. So, has anyone
else ran into this one?? Thanks for any info.
|
If had to had guess, I say clone. Does it have LEGO printed on the neck?
|
|
Author: | Teup | Posted: | Oct 19, 2019 17:37 | Subject: | Re: Same sticker sheet listed multiple times | Viewed: | 40 times | Topic: | Catalog | |
| In Catalog, randyipp writes:
| In Catalog Requests, Teup writes:
| In Catalog Requests, randyipp writes:
| Any reason there are 6 entries for the same sticker sheet? Can the name not
contain all the different sets it comes from?
[p=8777stk01]
[p=8778stk01]
[p=8779stk01]
[p=8780stk01]
[p=8799stk01]
[p=8800stk01]
|
I prefer it this way. It's a rare occurrence and changing it would save only
a few entries while making the entire sticker sheet database inconsistent.
I see how it can be a problem when you're looking to buy one, but I wonder
how often this really happens?
|
So are you saying it is preferable for the database but not for buying and selling.
This seems like the better solution?
Would you have 6 entries on your own webshop?
|
Well, buyers seem OK with puzzling around with minifigs buying them either whole
or in parts. That's also a situation where people are searching for two things
in parallel that come down to the same thing and it's much more common.
It would mess up my syncing software, for one thing. And I think generally item
names being adaptable depending on what is released next is not a good situation.
So yeah, if I can choose, I'd have multiple entries, but that's just
my opinion.
|
|
Author: | AZbrickGUY | Posted: | Oct 19, 2019 12:14 | Subject: | sw0620 Tusken Raider | Viewed: | 104 times | Topic: | Catalog | Status: | Open | |
| Hey all,
Has anyone else ran into this? I have a sw0620 Tusken Raider mini but without
the markings on his shirt. He is super mint looking and doesn't look like
they have been removed. I will try to take a pic of him to show. So, has anyone
else ran into this one?? Thanks for any info.
|
|
|
Author: | randyipp | Posted: | Oct 18, 2019 22:33 | Subject: | Re: Same sticker sheet listed multiple times | Viewed: | 43 times | Topic: | Catalog | |
| In Catalog Requests, Teup writes:
| In Catalog Requests, randyipp writes:
| Any reason there are 6 entries for the same sticker sheet? Can the name not
contain all the different sets it comes from?
[p=8777stk01]
[p=8778stk01]
[p=8779stk01]
[p=8780stk01]
[p=8799stk01]
[p=8800stk01]
|
I prefer it this way. It's a rare occurrence and changing it would save only
a few entries while making the entire sticker sheet database inconsistent.
I see how it can be a problem when you're looking to buy one, but I wonder
how often this really happens?
|
So are you saying it is preferable for the database but not for buying and selling.
This seems like the better solution?
Would you have 6 entries on your own webshop?
|
|
Author: | Teup | Posted: | Oct 18, 2019 18:31 | Subject: | Re: Same sticker sheet listed multiple times | Viewed: | 46 times | Topic: | Catalog | |
| In Catalog Requests, randyipp writes:
| Any reason there are 6 entries for the same sticker sheet? Can the name not
contain all the different sets it comes from?
[p=8777stk01]
[p=8778stk01]
[p=8779stk01]
[p=8780stk01]
[p=8799stk01]
[p=8800stk01]
|
I prefer it this way. It's a rare occurrence and changing it would save only
a few entries while making the entire sticker sheet database inconsistent.
I see how it can be a problem when you're looking to buy one, but I wonder
how often this really happens?
|
Author: | randyipp | Posted: | Oct 18, 2019 18:19 | Subject: | Same sticker sheet listed multiple times | Viewed: | 93 times | Topic: | Catalog | Status: | Open | |
| Any reason there are 6 entries for the same sticker sheet? Can the name not
contain all the different sets it comes from?
[p=8777stk01]
[p=8778stk01]
[p=8779stk01]
[p=8780stk01]
[p=8799stk01]
[p=8800stk01]
|
|
Author: | Turez | Posted: | Oct 18, 2019 13:02 | Subject: | Re: assembled parts with stickers | Viewed: | 59 times | Topic: | Catalog | |
| In Catalog, Lexesmom writes:
| Ok I found the "sticker over assembly" group but my question is what is the process
to submit it, when I go to add or change then it asks for the part number and
it doesn't have one because its two parts together with a sticker so how
do I submit it for an add to the set?
|
This is how I added a stickered assembly a few weeks ago:
First check if there already is an assembly like yours in the catalog by searching
for "assembly slopes".
Results: https://www.bricklink.com/catalogList.asp?q=assembly%20slopes
As you can see, there is no assembly consisting of two curved slopes 4x1. So
your assembly is a new one. Now check the first free number for assembled parts
with stickers. Open the "Sticker Over Assembly" category and sort by item number:
https://www.bricklink.com/catalogList.asp?pg=1&catString=582&itemBrand=1000&catType=P&v=1
The highest number is BA91pb01, so your part number would be BA92pb01.
To be sure this number is not used for a recent entry, check items pending approval:
https://www.bricklink.com/catalogList.asp?itemPend=Y
No results for "BA92pb01", so you can use this number.
For part name, I would suggest "Stickered Assembly 2 x 4 x 1 with Circled Number
9 Pattern (Sticker) - Set 8159 - 2 Slopes Curved 4 x 1 No Studs"
(I have used the name of similar part BA43pb02 as a template).
If exactly the same assembly (two curved slopes 4x1 in our example) is added
with another sticker later, that assembly will get number BA92pb02 etc. That
means "BAxx" stands for the speficic assembly and "pbxx" stands (as always) for
the sticker or imprint.
By the way, the stickered assemblies have to be renumbered in the near future
to get an extra 0.
Regards,
Jonas
|
|
Author: | maxx3001 | Posted: | Oct 17, 2019 12:41 | Subject: | Re: Upgrade for Forum / Message macro tags | Viewed: | 46 times | Topic: | Catalog | |
| In Catalog, Admin_Russell writes:
| We have tweaked the Forum / Message macro tags in the following ways:
|
Nice, but now the links to the parts don’t work.......
So, maybe not that usefull?
Maxx
|
1) For parts, the color of the image may now be specified by adding a comma and
the BrickLink part number after the Item Number:
2) For sets, instructions and original boxes, the suffix is only needed when
it is not "-1":
|
|
|
Author: | crazylegoman | Posted: | Oct 17, 2019 10:51 | Subject: | Re: Upgrade for Forum / Message macro tags | Viewed: | 41 times | Topic: | Catalog | |
| I really like both of these upgrades. Thanks!
David
|
Author: | SylvainLS | Posted: | Oct 17, 2019 06:57 | Subject: | Re: Upgrade for Forum / Message macro tags | Viewed: | 45 times | Topic: | Catalog | |
| In Catalog, Admin_Russell writes:
| We have tweaked the Forum / Message macro tags in the following ways:
1) For parts, the color of the image may now be specified by adding a comma and
the BrickLink part number after the Item Number:
|
Yeah!
| 2) For sets, instructions and original boxes, the suffix is only needed when
it is not "-1":
|
Yeah 2!
|
|
Author: | Hygrotus | Posted: | Oct 17, 2019 06:53 | Subject: | Re: Upgrade for Forum / Message macro tags | Viewed: | 44 times | Topic: | Catalog | |
| In Catalog, JusTiCe8 writes:
| I have a hard time understanding the sentence, in fact, we should read "a comma
and the BL color number" and not "BL part number".
Still, a direct link to color codes would be welcome, I doubt anyone knows them
all perfectly.
In Catalog, Admin_Russell writes:
| We have tweaked the Forum / Message macro tags in the following ways:
1) For parts, the color of the image may now be specified by adding a comma and
the BrickLink part number after the Item Number:
[ p=4085d,7 ]
|
[...]
|
Here you have direct link to colors it is easy to find,
and there you have id for them
https://www.bricklink.com/catalogColors.asp?utm_content=subnav
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|