| Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | POPS_BLOCK_SHOP | Posted: | Oct 25, 2019 20:40 | Subject: | Set 11915 Nya Water Spider needs added | Viewed: | 71 times | Topic: | Catalog | Status: | Open | |
| When I look up 11915 in bricklink it does not come up. Anyone know why??? |
|
Author: | normann1974 | Posted: | Oct 25, 2019 18:07 | Subject: | Warped 2x4 plates? | Viewed: | 115 times | Topic: | Catalog | Status: | Open | |
| These warped 2x4 plates have been showing up in some lots I've bought (I've
thrown out about 25 of these during the last couple of months).
They only ever warp in the pip end, and I've seen it only for black, and
never for any other types of plates.
Does anyone know of an explanation?
/Jan
|
|
|
Author: | Stellar | Posted: | Oct 25, 2019 11:25 | Subject: | Re: Trying to add torso gets me 500 error | Viewed: | 26 times | Topic: | Catalog | |
| Thanks for the reply but it was while creating the parts, you upload the picture
after you have already created the parts.
I just tried now and I got to create them correctly and it let me add the image
too.
Thanks,
Sergio
Stellar Bricks
In Catalog, bje writes:
| Reduce the size of your graphic - if it is too big you make BrickLink have 500
seizures
In Catalog, Stellar writes:
| Hello,
I want to create an entry to this new torso and torso assembly.
I tried to add these 2 items:
973pb3703
Torso LEGO World The Netherlands 2019 with Number 19 Pattern
0.82g
973pb3703c01
Torso LEGO World The Netherlands 2019 with Number 19 Pattern / White Arms / Yellow
Hands
1.25g
But I keep getting error 500...
Could someone else try?
Thanks,
Sergio
|
|
|
|
Author: | bje | Posted: | Oct 25, 2019 09:33 | Subject: | Re: Trying to add torso gets me 500 error | Viewed: | 22 times | Topic: | Catalog | |
| Reduce the size of your graphic - if it is too big you make BrickLink have 500
seizures
In Catalog, Stellar writes:
| Hello,
I want to create an entry to this new torso and torso assembly.
I tried to add these 2 items:
973pb3703
Torso LEGO World The Netherlands 2019 with Number 19 Pattern
0.82g
973pb3703c01
Torso LEGO World The Netherlands 2019 with Number 19 Pattern / White Arms / Yellow
Hands
1.25g
But I keep getting error 500...
Could someone else try?
Thanks,
Sergio
|
|
|
Author: | Stellar | Posted: | Oct 25, 2019 09:24 | Subject: | Trying to add torso gets me 500 error | Viewed: | 48 times | Topic: | Catalog | Status: | Open | |
| Hello,
I want to create an entry to this new torso and torso assembly.
I tried to add these 2 items:
973pb3703
Torso LEGO World The Netherlands 2019 with Number 19 Pattern
0.82g
973pb3703c01
Torso LEGO World The Netherlands 2019 with Number 19 Pattern / White Arms / Yellow
Hands
1.25g
But I keep getting error 500...
Could someone else try?
Thanks,
Sergio
|
|
Author: | Admin_Russell | Posted: | Oct 23, 2019 20:41 | Subject: | Re: Upgrade for Forum / Message macro tags | Viewed: | 87 times | Topic: | Catalog | |
| In Catalog, maxx3001 writes:
| In Catalog, Admin_Russell writes:
| We have tweaked the Forum / Message macro tags in the following ways:
|
Nice, but now the links to the parts don’t work.......
So, maybe not that usefull?
|
This bug has already been fixed but it isn't live yet. We are also adding
the color name to the macro tag.
|
|
Author: | Crafteewon | Posted: | Oct 21, 2019 00:38 | Subject: | Re: sw0620 Tusken Raider | Viewed: | 57 times | Topic: | Catalog | |
| In Catalog, AZbrickGUY writes:
| Hey all,
Has anyone else ran into this? I have a sw0620 Tusken Raider mini but without
the markings on his shirt. He is super mint looking and doesn't look like
they have been removed. I will try to take a pic of him to show. So, has anyone
else ran into this one?? Thanks for any info.
|
I found that 2 of the 6 I have do not shown the markings on the front although
they both have them on the back.
They are not clones as they have lego stamps and I parted them out new from sets
myself. I parted them from two different sets. The battlepack and the speeder
so unsure which one they came from.
|
|
|
Author: | axaday | Posted: | Oct 19, 2019 19:05 | Subject: | Re: Same sticker sheet listed multiple times | Viewed: | 50 times | Topic: | Catalog | |
| Would your software still work if there were one entry with 5 alternate part
numbers?
n Catalog, Teup writes:
| In Catalog, randyipp writes:
| In Catalog Requests, Teup writes:
| In Catalog Requests, randyipp writes:
| Any reason there are 6 entries for the same sticker sheet? Can the name not
contain all the different sets it comes from?
[p=8777stk01]
[p=8778stk01]
[p=8779stk01]
[p=8780stk01]
[p=8799stk01]
[p=8800stk01]
|
I prefer it this way. It's a rare occurrence and changing it would save only
a few entries while making the entire sticker sheet database inconsistent.
I see how it can be a problem when you're looking to buy one, but I wonder
how often this really happens?
|
So are you saying it is preferable for the database but not for buying and selling.
This seems like the better solution?
Would you have 6 entries on your own webshop?
|
Well, buyers seem OK with puzzling around with minifigs buying them either whole
or in parts. That's also a situation where people are searching for two things
in parallel that come down to the same thing and it's much more common.
It would mess up my syncing software, for one thing. And I think generally item
names being adaptable depending on what is released next is not a good situation.
So yeah, if I can choose, I'd have multiple entries, but that's just
my opinion.
|
|
|
Author: | Cob | Posted: | Oct 19, 2019 17:38 | Subject: | Re: sw0620 Tusken Raider | Viewed: | 45 times | Topic: | Catalog | |
| In Catalog, AZbrickGUY writes:
| Hey all,
Has anyone else ran into this? I have a sw0620 Tusken Raider mini but without
the markings on his shirt. He is super mint looking and doesn't look like
they have been removed. I will try to take a pic of him to show. So, has anyone
else ran into this one?? Thanks for any info.
|
If had to had guess, I say clone. Does it have LEGO printed on the neck?
|
|
Author: | Teup | Posted: | Oct 19, 2019 17:37 | Subject: | Re: Same sticker sheet listed multiple times | Viewed: | 40 times | Topic: | Catalog | |
| In Catalog, randyipp writes:
| In Catalog Requests, Teup writes:
| In Catalog Requests, randyipp writes:
| Any reason there are 6 entries for the same sticker sheet? Can the name not
contain all the different sets it comes from?
[p=8777stk01]
[p=8778stk01]
[p=8779stk01]
[p=8780stk01]
[p=8799stk01]
[p=8800stk01]
|
I prefer it this way. It's a rare occurrence and changing it would save only
a few entries while making the entire sticker sheet database inconsistent.
I see how it can be a problem when you're looking to buy one, but I wonder
how often this really happens?
|
So are you saying it is preferable for the database but not for buying and selling.
This seems like the better solution?
Would you have 6 entries on your own webshop?
|
Well, buyers seem OK with puzzling around with minifigs buying them either whole
or in parts. That's also a situation where people are searching for two things
in parallel that come down to the same thing and it's much more common.
It would mess up my syncing software, for one thing. And I think generally item
names being adaptable depending on what is released next is not a good situation.
So yeah, if I can choose, I'd have multiple entries, but that's just
my opinion.
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
|