Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | yorbrick | Posted: | Jan 15, 2022 10:19 | Subject: | Re: Parting out instructions | Viewed: | 62 times | Topic: | Suggestions | |
| |
I see these listed all the time. Buyers are looking for these, it's not the
seller's fault if the only way these can be listed is under the general listing
with a note.
|
It is not the only way. There is always the possibility of a custom listing.
Just like a minifigure that is missing a part is not the minifigure, a set of
instruction books missing one or more is not the instructions. So maybe custom
listings are better in that case.
|
|
Author: | TBS | Posted: | Jan 15, 2022 06:12 | Subject: | Re: Parting out instructions | Viewed: | 53 times | Topic: | Suggestions | |
| In Suggestions, roxanne writes:
| Let me know what you all think. Thanks!
Roxanne
|
Hi Roxanne,
that´s a great idea. Please do so. I have some as well were books are missing
for whatever reason.
Unfortunatly, i won´t or can´t be a buyers of yours, for shipping reasons.
I don´t buy heavy items from overseas, unless not to get from anywhere nearby,
and only if absolutely necessary.
Good luck, and thank you for your service.
|
|
Author: | zorbanj | Posted: | Jan 14, 2022 09:34 | Subject: | Re: Parting out instructions | Viewed: | 55 times | Topic: | Suggestions | |
| In Catalog, roxanne writes:
| Not sure if this has ever been proposed... but what if we listed Instructions
that have more than one book with the ability to part them out...
|
This is a great idea. It would also be much easier for buyers searching for only
1 book to find these as well.
| I have a bunch of used instruction books that are missing 1 or more of the books
in the set. I hate to list them and then note that "THIS IS ONLY FOR BOOK 2".
It messes with the pricing.
|
I see these listed all the time. Buyers are looking for these, it's not the
seller's fault if the only way these can be listed is under the general listing
with a note.
| It would be like parting out a minifigure...
Let me know what you all think. Thanks!
Roxanne
|
|
|
Author: | krazy_yvan | Posted: | Jan 14, 2022 08:14 | Subject: | Re: Comment color showing in order screen | Viewed: | 19 times | Topic: | Suggestions | |
| In Suggestions, krazy_yvan writes:
| Hello,
I usually color my comments because they are pointing to another small mold difference
or vintage of the same part that Bricklink does not differenciate.
The problem is that when I am preparing the order and reviewing the order screen,
the comment is not colored, and I happen to miss the mold difference
Is there a way to make it show comment colors?
|
Moreover, the readability of the comment is very messy on the order screen, as
you get the comment appended to the part name, without any separation.
|
|
Author: | krazy_yvan | Posted: | Jan 14, 2022 08:08 | Subject: | Comment color showing in order screen | Viewed: | 50 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
| Hello,
I usually color my comments because they are pointing to another small mold difference
or vintage of the same part that Bricklink does not differenciate.
The problem is that when I am preparing the order and reviewing the order screen,
the comment is not colored, and I happen to miss the mold difference
Is there a way to make it show comment colors?
|
|
Author: | roxanne | Posted: | Jan 13, 2022 22:17 | Subject: | Parting out instructions | Viewed: | 152 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
| Not sure if this has ever been proposed... but what if we listed Instructions
that have more than one book with the ability to part them out...
I have a bunch of used instruction books that are missing 1 or more of the books
in the set. I hate to list them and then note that "THIS IS ONLY FOR BOOK 2".
It messes with the pricing.
It would be like parting out a minifigure...
Let me know what you all think. Thanks!
Roxanne
|
|
Author: | hugibricks | Posted: | Jan 12, 2022 21:01 | Subject: | Re: Price Guide - Part Out Value. | Viewed: | 35 times | Topic: | Suggestions | |
| Thank you for the replies.
Ignore the terrible photoshop skills. But just the values in the one screen just
seems logical.
In Suggestions, Teup writes:
| In Suggestions, yorbrick writes:
| In Suggestions, Hugi501 writes:
| Hello There,
I'm sure this has been suggested.
1: But when doing a part out, why do we have to select NEW or USED each time.
Can I suggested you just need to enter the set one know. From there the part
out screen lists both on the same screen.
|
Because what you are parting out is either new or used. Doing both at the
same time is likely to lead to errors.
Also you can set the default for what you do most often.
|
I think the OP may be referring to the part out value screen. In that case: I'd
say logically it should be either all or nothing - if it's going to display
New and Used on one page, it should also display whole minifigures vs minifigure
parts, break sets in set yes vs no.
Besides, there's a little bug in the page where if you choose minifigure
parts, it considers the whole minifigures as "missing" items. I've reported
this and it was going to be fixed, but that must have been 5 years ago or so
by now.. but that's business as usual on Bricklink.
|
|
|
|
Author: | zorbanj | Posted: | Jan 12, 2022 15:04 | Subject: | Re: Too much fragrance on the Legos | Viewed: | 55 times | Topic: | Suggestions | |
| Everything is strongly scented now - lotions, candles, body washes, detergents.
Many people constantly wash their hands now with hand soaps because of covid
(scented of course).
Then there's all of the aromas floating around from when the package is dropped
off until it's delivered. I just got a non-lego package that faintly smelled
like skunk weed.
In Suggestions, Bitay15 writes:
| I don't know when it started or why but I keep receiving new Lego parts that
smell strongly of perfume or scented detergent. Why? I have to air them out
for several days before I can use them. I cannot reuse any of the plastic bags
or envelopes so they are thrown out without repurposing them. If you are a seller
who keeps your Legos in areas where they can pick up offensive odors, or worse
wash them in scented soap, please list it in your terms. As soon as someone says
they wash the Legos, I look elsewhere. So give the buyers a heads up.
|
|
|
Author: | jennnifer | Posted: | Jan 12, 2022 14:34 | Subject: | Re: Too much fragrance on the Legos | Viewed: | 53 times | Topic: | Suggestions | |
| In Suggestions, yorbrick writes:
| In Suggestions, jennnifer writes:
| In Suggestions, psusaxman2000 writes:
| In Suggestions, Bitay15 writes:
| I don't know when it started or why but I keep receiving new Lego parts that
smell strongly of perfume or scented detergent. Why? I have to air them out
for several days before I can use them. I cannot reuse any of the plastic bags
or envelopes so they are thrown out without repurposing them. If you are a seller
who keeps your Legos in areas where they can pick up offensive odors, or worse
wash them in scented soap, please list it in your terms. As soon as someone says
they wash the Legos, I look elsewhere. So give the buyers a heads up.
|
Why are new parts being washed in the first place. They are coming straight
out of a bag and into inventory. This would seem counterproductive. On the
flip side if parts are arriving with that much odor, I would run a guess that
someone is using maybe and oil diffuser or something like that that might
be causing some of the problem. Even so they would almost have to have it on
the parts directly to cause that much transfer over time.
|
I find it strange that you both immediately assumed the OP was referring to washing
new LEGO? There was nothing mentioned about that in the post.
|
There is the word "new" in front of "Lego parts" the first line.
|
Oh, wow. I feel... I actually read that three times without seeing the word new.
lol I need a nap. Sorry!!
Jen
|
|
Author: | SylvainLS | Posted: | Jan 12, 2022 14:31 | Subject: | Re: Too much fragrance on the Legos | Viewed: | 53 times | Topic: | Suggestions | |
| In Suggestions, yorbrick writes:
| In Suggestions, Bitay15 writes:
| I don't know when it started or why but I keep receiving new Lego parts that
smell strongly of perfume or scented detergent. Why? I have to air them out
for several days before I can use them. I cannot reuse any of the plastic bags
or envelopes so they are thrown out without repurposing them. If you are a seller
who keeps your Legos in areas where they can pick up offensive odors, or worse
wash them in scented soap, please list it in your terms. As soon as someone says
they wash the Legos, I look elsewhere. So give the buyers a heads up.
|
Why would sellers be washing new LEGO parts?
|
Smokers?
|
|
Author: | yorbrick | Posted: | Jan 12, 2022 14:21 | Subject: | Re: Too much fragrance on the Legos | Viewed: | 47 times | Topic: | Suggestions | |
| In Suggestions, jennnifer writes:
| In Suggestions, psusaxman2000 writes:
| In Suggestions, Bitay15 writes:
| I don't know when it started or why but I keep receiving new Lego parts that
smell strongly of perfume or scented detergent. Why? I have to air them out
for several days before I can use them. I cannot reuse any of the plastic bags
or envelopes so they are thrown out without repurposing them. If you are a seller
who keeps your Legos in areas where they can pick up offensive odors, or worse
wash them in scented soap, please list it in your terms. As soon as someone says
they wash the Legos, I look elsewhere. So give the buyers a heads up.
|
Why are new parts being washed in the first place. They are coming straight
out of a bag and into inventory. This would seem counterproductive. On the
flip side if parts are arriving with that much odor, I would run a guess that
someone is using maybe and oil diffuser or something like that that might
be causing some of the problem. Even so they would almost have to have it on
the parts directly to cause that much transfer over time.
|
I find it strange that you both immediately assumed the OP was referring to washing
new LEGO? There was nothing mentioned about that in the post.
|
There is the word "new" in front of "Lego parts" the first line.
|
|
Author: | jennnifer | Posted: | Jan 12, 2022 14:10 | Subject: | Re: Too much fragrance on the Legos | Viewed: | 50 times | Topic: | Suggestions | |
| In Suggestions, psusaxman2000 writes:
| In Suggestions, Bitay15 writes:
| I don't know when it started or why but I keep receiving new Lego parts that
smell strongly of perfume or scented detergent. Why? I have to air them out
for several days before I can use them. I cannot reuse any of the plastic bags
or envelopes so they are thrown out without repurposing them. If you are a seller
who keeps your Legos in areas where they can pick up offensive odors, or worse
wash them in scented soap, please list it in your terms. As soon as someone says
they wash the Legos, I look elsewhere. So give the buyers a heads up.
|
Why are new parts being washed in the first place. They are coming straight
out of a bag and into inventory. This would seem counterproductive. On the
flip side if parts are arriving with that much odor, I would run a guess that
someone is using maybe and oil diffuser or something like that that might
be causing some of the problem. Even so they would almost have to have it on
the parts directly to cause that much transfer over time.
|
I find it strange that you both immediately assumed the OP was referring to washing
new LEGO? There was nothing mentioned about that in the post.
Jen
|
|
Author: | jennnifer | Posted: | Jan 12, 2022 14:08 | Subject: | Re: Too much fragrance on the Legos | Viewed: | 53 times | Topic: | Suggestions | |
| In Suggestions, Bitay15 writes:
| I don't know when it started or why but I keep receiving new Lego parts that
smell strongly of perfume or scented detergent. Why? I have to air them out
for several days before I can use them. I cannot reuse any of the plastic bags
or envelopes so they are thrown out without repurposing them. If you are a seller
who keeps your Legos in areas where they can pick up offensive odors, or worse
wash them in scented soap, please list it in your terms. As soon as someone says
they wash the Legos, I look elsewhere. So give the buyers a heads up.
|
Well, I think a lot of people are actually wearing perfume or use scented
soap and the smell just permeates their environment like cigarette smoke.
Also, I have received packages that reek of perfume from people whom I am certain
don't wear it. I guess the mail carrier, or the package sorter, or the contents
of a nearby package can have the same effect.
I personally can't stand the smell of tea tree oil but some people just insist
on using it everywhere.
I am sorry that you would bypass my store because I wash my used LEGO. There
are no scents on me.
Jen
|
|
Author: | psusaxman2000 | Posted: | Jan 12, 2022 14:03 | Subject: | Re: Too much fragrance on the Legos | Viewed: | 38 times | Topic: | Suggestions | |
| In Suggestions, Bitay15 writes:
| I don't know when it started or why but I keep receiving new Lego parts that
smell strongly of perfume or scented detergent. Why? I have to air them out
for several days before I can use them. I cannot reuse any of the plastic bags
or envelopes so they are thrown out without repurposing them. If you are a seller
who keeps your Legos in areas where they can pick up offensive odors, or worse
wash them in scented soap, please list it in your terms. As soon as someone says
they wash the Legos, I look elsewhere. So give the buyers a heads up.
|
Why are new parts being washed in the first place. They are coming straight
out of a bag and into inventory. This would seem counterproductive. On the
flip side if parts are arriving with that much odor, I would run a guess that
someone is using maybe and oil diffuser or something like that that might
be causing some of the problem. Even so they would almost have to have it on
the parts directly to cause that much transfer over time.
|
|
Author: | yorbrick | Posted: | Jan 12, 2022 14:02 | Subject: | Re: Too much fragrance on the Legos | Viewed: | 43 times | Topic: | Suggestions | |
| In Suggestions, Bitay15 writes:
| I don't know when it started or why but I keep receiving new Lego parts that
smell strongly of perfume or scented detergent. Why? I have to air them out
for several days before I can use them. I cannot reuse any of the plastic bags
or envelopes so they are thrown out without repurposing them. If you are a seller
who keeps your Legos in areas where they can pick up offensive odors, or worse
wash them in scented soap, please list it in your terms. As soon as someone says
they wash the Legos, I look elsewhere. So give the buyers a heads up.
|
Why would sellers be washing new LEGO parts?
|
|
Author: | Bitay15 | Posted: | Jan 12, 2022 13:58 | Subject: | Too much fragrance on the Legos | Viewed: | 182 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
| I don't know when it started or why but I keep receiving new Lego parts that
smell strongly of perfume or scented detergent. Why? I have to air them out
for several days before I can use them. I cannot reuse any of the plastic bags
or envelopes so they are thrown out without repurposing them. If you are a seller
who keeps your Legos in areas where they can pick up offensive odors, or worse
wash them in scented soap, please list it in your terms. As soon as someone says
they wash the Legos, I look elsewhere. So give the buyers a heads up.
|
|
Author: | Teup | Posted: | Jan 12, 2022 06:03 | Subject: | Re: Price Guide - Part Out Value. | Viewed: | 48 times | Topic: | Suggestions | |
| In Suggestions, yorbrick writes:
| In Suggestions, Hugi501 writes:
| Hello There,
I'm sure this has been suggested.
1: But when doing a part out, why do we have to select NEW or USED each time.
Can I suggested you just need to enter the set one know. From there the part
out screen lists both on the same screen.
|
Because what you are parting out is either new or used. Doing both at the
same time is likely to lead to errors.
Also you can set the default for what you do most often.
|
I think the OP may be referring to the part out value screen. In that case: I'd
say logically it should be either all or nothing - if it's going to display
New and Used on one page, it should also display whole minifigures vs minifigure
parts, break sets in set yes vs no.
Besides, there's a little bug in the page where if you choose minifigure
parts, it considers the whole minifigures as "missing" items. I've reported
this and it was going to be fixed, but that must have been 5 years ago or so
by now.. but that's business as usual on Bricklink.
|
|
Author: | yorbrick | Posted: | Jan 12, 2022 02:47 | Subject: | Re: Price Guide - Part Out Value. | Viewed: | 31 times | Topic: | Suggestions | |
| In Suggestions, Hugi501 writes:
| Hello There,
I'm sure this has been suggested.
1: But when doing a part out, why do we have to select NEW or USED each time.
Can I suggested you just need to enter the set one know. From there the part
out screen lists both on the same screen.
|
Because what you are parting out is either new or used. Doing both at the
same time is likely to lead to errors.
Also you can set the default for what you do most often.
|
|
Author: | hugibricks | Posted: | Jan 11, 2022 23:00 | Subject: | Price Guide - Part Out Value. | Viewed: | 81 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
| Hello There,
I'm sure this has been suggested.
1: But when doing a part out, why do we have to select NEW or USED each time.
Can I suggested you just need to enter the set one know. From there the part
out screen lists both on the same screen.
2: When in Catalog view. There is enough white space to include the part out
value when also searching for sets.
This would save so many unnecessary searches.
Please and thanks.
Matt
|
|
Author: | andrulli | Posted: | Jan 10, 2022 16:50 | Subject: | increase/decrease pricing in inventory | Viewed: | 77 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
| Hi!
I would love to see the increase/decrease price by % or currency feature during
the part out to inventory process.
This function is already implemented in wishlist price settings.
It would be great to have it as an additional option in the first part out to
inventory form.
Thanks a lot in advance,
Andreas.
|
|
Author: | bricksonmove | Posted: | Jan 8, 2022 23:04 | Subject: | Pay pal - QR CODE PAYMENT | Viewed: | 61 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
| Hi
I dont know if this has been looked at or if it is possible to set up on here.
But has anyone looked at pay pal qr code payment as a method as I just noticed
the fees are a hell lot better than mirco and normal pay pal fees. This is only
available to bussiness accounts as far as I am aware of.
For down under (Australia)
Normal Transactions 2.60% + fixed fee ($0.30 cents)
QR Code Transactions – 10.01 AUD and above 0.90% + fixed fee ($0.10)
QR code Transactions – 10.00 AUD and below 1.40% + fixed fee ($0.10)
Mirco payments 5.00% + micropayments fixed fee ($0.05)
As you can see from the above the fees are way cheaper than both mirco and standard
transactions just food for thought.
|
|
Author: | avichaiz | Posted: | Jan 6, 2022 12:39 | Subject: | Re: Share wanted list | Viewed: | 34 times | Topic: | Suggestions | |
| In Suggestions, Brickwilbo writes:
| In Suggestions, avichaiz writes:
| Its long since I see the button of Share wanted list with the comment of Coming
soon
I like to ask if you know when this feature will be available.
Thanks a lot
|
You can download your Wantlists and share the file.
It's only not on that page.
|
I think that by "Share wanted list" the intention was to share it publicly in
the website, isn't it? Will this option be available?
|
Author: | Brickwilbo | Posted: | Jan 6, 2022 02:10 | Subject: | Re: Share wanted list | Viewed: | 32 times | Topic: | Suggestions | |
| In Suggestions, avichaiz writes:
| Its long since I see the button of Share wanted list with the comment of Coming
soon
I like to ask if you know when this feature will be available.
Thanks a lot
|
You can download your Wantlists and share the file.
It's only not on that page.
|
Author: | avichaiz | Posted: | Jan 6, 2022 01:18 | Subject: | Share wanted list | Viewed: | 62 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
| Its long since I see the button of Share wanted list with the comment of Coming
soon
I like to ask if you know when this feature will be available.
Thanks a lot
|
|
Author: | BrickBen | Posted: | Jan 4, 2022 04:22 | Subject: | Improve and simplify shopping experience | Viewed: | 97 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
| Current issues: The "Buy All" wizard is not always optimal, so when I am looking
to add parts or minifigures, I want to use the same vendors, especially since
it's ordered by price. I have to have several tabs open to see with what
vendors I have open baskets in my cart and then browse through their oftentimes
massive stores to see if they have other items on my wishlist.
Suggestion: In a view in which vendors are compared (e.g., if I click on a set,
part or minifigure), add 2 icons for whether the vendor is in my basket already
and how many parts/minifigures this vendor is selling that are in my basket.
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|