Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | axaday | Posted: | Mar 18, 2020 09:59 | Subject: | Re: Decorated categories | Viewed: | 29 times | Topic: | Suggestions | |
| In Suggestions, athornberg writes:
| Replace "decorated" categories with 2 new categories, "printed" and "with stickers".
|
I think there are so many categories right now that they are very averse to creating
more. I'm doubtful that a suggestion that would add more than a dozen new
categories is going anywhere.
|
Author: | athornberg | Posted: | Mar 18, 2020 09:51 | Subject: | Decorated categories | Viewed: | 77 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
| Replace "decorated" categories with 2 new categories, "printed" and "with stickers". |
|
Author: | samsam2 | Posted: | Mar 17, 2020 17:15 | Subject: | Re: adding new inventory then edit | Viewed: | 23 times | Topic: | Suggestions | |
| In Inventories, samsam2 writes:
| is it just my browser settings causing all input to be lost when going back to
edit an inventory before submission? When I'm changing an existing inventory,
that page seems to let you go back and edit your work and even add extra rows
and you don't lose your work, but I do lose all my work when I have to correct
a new inventory I'm trying to add.
|
I finally realized that once I submitted a new inventory, it is relatively easy
to edit it.... this is not obvious to a new inventory submitter.
Every time I went back to make a change in the submission form I lost all my
work, which is frustrating even for a little polybag, I can't imagine how
disappointing it would be when submitting a large set.
Maybe a warning on the form not to go back, but instead to submit the inventory
and then edit it would be helpful....
|
|
Author: | samsam2 | Posted: | Mar 17, 2020 15:27 | Subject: | adding new inventory then edit | Viewed: | 68 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
| is it just my browser settings causing all input to be lost when going back to
edit an inventory before submission? When I'm changing an existing inventory,
that page seems to let you go back and edit your work and even add extra rows
and you don't lose your work, but I do lose all my work when I have to correct
a new inventory I'm trying to add.
|
Author: | miskox | Posted: | Mar 17, 2020 05:38 | Subject: | Quotes | Viewed: | 94 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
| I would really like to delete/file... quotes. If I hover over 'my store'
icon I see 13 Quotes. They have all been filed so I would prefer not to see this
number there. Please change something (maybe display only not filed quotes?).
Thanks.
Saso
|
|
Author: | TheBrickGuys | Posted: | Mar 15, 2020 11:18 | Subject: | Re: Promocode Functionality | Viewed: | 42 times | Topic: | Suggestions | |
| In Suggestions, J_Keter writes:
| Hi all!
Sorry for my bad english, but this idea I really want to share with you
I think that Bricklink need functionality for sellers to offer Promocode additionaly
to coupons.
Coupons can be used just by registered users and mostly work with returned buyers
But promocode functionality is a reason for seller to grow up his social network
auditory and could help to bring more new users to bricklink.
I think it should work this way:
Seller can set up many promocodes at the settings.
He can chose the % or fixed ammount for each promocode.
He can set up it same way as coupon (for parts or sets / new or used / additionaly
to current discounts or not / how long it will work for buyers (should be possible
to set up permanent promocode))
On the forum should be special Topic for promocodes. It will work instead of
forum messages like "coupon for each who write me here"
Promocodes are realy good working strategy for social marketing and also can
be added to the bussiness cards or to the store page or many other places.
How do you think about it?
|
I think that is a great idea and I would think that it would be quite easy to
implement at the checkout page.
Great idea!
Jim
|
|
Author: | Kuboteka | Posted: | Mar 14, 2020 20:29 | Subject: | Promocode Functionality | Viewed: | 83 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
| Hi all!
Sorry for my bad english, but this idea I really want to share with you
I think that Bricklink need functionality for sellers to offer Promocode additionaly
to coupons.
Coupons can be used just by registered users and mostly work with returned buyers
But promocode functionality is a reason for seller to grow up his social network
auditory and could help to bring more new users to bricklink.
I think it should work this way:
Seller can set up many promocodes at the settings.
He can chose the % or fixed ammount for each promocode.
He can set up it same way as coupon (for parts or sets / new or used / additionaly
to current discounts or not / how long it will work for buyers (should be possible
to set up permanent promocode))
On the forum should be special Topic for promocodes. It will work instead of
forum messages like "coupon for each who write me here"
Promocodes are realy good working strategy for social marketing and also can
be added to the bussiness cards or to the store page or many other places.
How do you think about it?
|
|
Author: | Brickwilbo | Posted: | Mar 14, 2020 15:30 | Subject: | Re: Bulk Coupon Create Functionality | Viewed: | 30 times | Topic: | Suggestions | |
| In Suggestions, Surplus writes:
| I think that an option to create coupons in bulk would be very useful.
The submission form could include the basic coupon parameters and then have some
way of selecting the members that will receive the coupon. This could be filtering
options such as everybody over x number of orders, or it could be a text box
where the usernames could be copied and pasted in bulk.
|
The bulk coupons feature has been terminated because of spamming.
|
|
Author: | BrickenbergNC | Posted: | Mar 14, 2020 15:01 | Subject: | Bulk Coupon Create Functionality | Viewed: | 48 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
| I think that an option to create coupons in bulk would be very useful.
The submission form could include the basic coupon parameters and then have some
way of selecting the members that will receive the coupon. This could be filtering
options such as everybody over x number of orders, or it could be a text box
where the usernames could be copied and pasted in bulk.
|
|
Author: | NelisSolis | Posted: | Mar 14, 2020 10:16 | Subject: | Re: Item cost auto worked out when parting out | Viewed: | 21 times | Topic: | Suggestions | |
| In Suggestions, Teup writes:
| In Suggestions, ErwinNL writes:
| In Suggestions, CaseyAF writes:
| Hi there,
Do you think a feature will be added in which when you part out a set you can
add in how much the set cost and then the system would calculate how much was
paid per piece? It's a pain adding it in individually especially when you
have over 300 items! It would be nice if a feature like this also worked out
how much each part cost based on how much they sell for (depending on if you
picked current average/6 month average etc). For example if you bought a set
for $20 and it had 4 parts equally the cost would be $5, however if two of the
parts average was $10 each and the other two were $1 each having a cost of $5
for each part wouldn't make sense. Having to work that out for each part
by hand is just way too time consuming, but if the system did it on part out
entry it would be awesome.
|
This will only work if parts always have the same cost price in each set, else
you would have to make separate lots for the same part (there is only one mycost
field per inventory item).
|
Then it could offer 3 options, a bit similar to remarks:
Old mycost
New mycost
Average mycost
|
Those options are already provided during part-out, except it is not average
but quantity_average: https://www.bricklink.com/help.asp?helpID=1109&q=my+cost
The option is only shown if you have the "mycost" input fields enabled in your
store settings.
|
|
Author: | Teup | Posted: | Mar 14, 2020 09:21 | Subject: | Re: Item cost auto worked out when parting out | Viewed: | 27 times | Topic: | Suggestions | |
| In Suggestions, ErwinNL writes:
| In Suggestions, CaseyAF writes:
| Hi there,
Do you think a feature will be added in which when you part out a set you can
add in how much the set cost and then the system would calculate how much was
paid per piece? It's a pain adding it in individually especially when you
have over 300 items! It would be nice if a feature like this also worked out
how much each part cost based on how much they sell for (depending on if you
picked current average/6 month average etc). For example if you bought a set
for $20 and it had 4 parts equally the cost would be $5, however if two of the
parts average was $10 each and the other two were $1 each having a cost of $5
for each part wouldn't make sense. Having to work that out for each part
by hand is just way too time consuming, but if the system did it on part out
entry it would be awesome.
|
This will only work if parts always have the same cost price in each set, else
you would have to make separate lots for the same part (there is only one mycost
field per inventory item).
|
Then it could offer 3 options, a bit similar to remarks:
Old mycost
New mycost
Average mycost
|
|
Author: | ErwinNL | Posted: | Mar 14, 2020 09:09 | Subject: | Re: Item cost auto worked out when parting out | Viewed: | 20 times | Topic: | Suggestions | |
| In Suggestions, CaseyAF writes:
| Hi there,
Do you think a feature will be added in which when you part out a set you can
add in how much the set cost and then the system would calculate how much was
paid per piece? It's a pain adding it in individually especially when you
have over 300 items! It would be nice if a feature like this also worked out
how much each part cost based on how much they sell for (depending on if you
picked current average/6 month average etc). For example if you bought a set
for $20 and it had 4 parts equally the cost would be $5, however if two of the
parts average was $10 each and the other two were $1 each having a cost of $5
for each part wouldn't make sense. Having to work that out for each part
by hand is just way too time consuming, but if the system did it on part out
entry it would be awesome.
|
This will only work if parts always have the same cost price in each set, else
you would have to make separate lots for the same part (there is only one mycost
field per inventory item).
|
|
Author: | Teup | Posted: | Mar 14, 2020 08:29 | Subject: | Re: Item cost auto worked out when parting out | Viewed: | 26 times | Topic: | Suggestions | |
| In Suggestions, CaseyAF writes:
| Hi there,
Do you think a feature will be added in which when you part out a set you can
add in how much the set cost and then the system would calculate how much was
paid per piece? It's a pain adding it in individually especially when you
have over 300 items! It would be nice if a feature like this also worked out
how much each part cost based on how much they sell for (depending on if you
picked current average/6 month average etc). For example if you bought a set
for $20 and it had 4 parts equally the cost would be $5, however if two of the
parts average was $10 each and the other two were $1 each having a cost of $5
for each part wouldn't make sense. Having to work that out for each part
by hand is just way too time consuming, but if the system did it on part out
entry it would be awesome.
|
Yep, I proposed this several times. It should let you enter what you bought it
for, then it can calculate a profit ratio, and with that profit ratio it can
calculate your selling prices for all parts back to their cost prices. In order
words: If you bought a set for 10 and the part out uploads 20, you know that
50% is profit, so if a part is uploaded for a selling price of 0.32, the MyCost
for that part should be 0.16.
The MyCost field seems to be a feature that was never fleshed out, just the field
was added but it doesn't really do anything. Under the previous management
it wasn't developed but maybe now that LEGO runs the show they might actually
look into it
|
|
Author: | Brickwilbo | Posted: | Mar 14, 2020 08:04 | Subject: | Re: Item cost auto worked out when parting out | Viewed: | 24 times | Topic: | Suggestions | |
| In Suggestions, NelisSolis writes:
| In Suggestions, Brickwilbo writes:
| In Suggestions, CaseyAF writes:
| Hi there,
Do you think a feature will be added in which when you part out a set you can
add in how much the set cost and then the system would calculate how much was
paid per piece? It's a pain adding it in individually especially when you
have over 300 items! It would be nice if a feature like this also worked out
how much each part cost based on how much they sell for (depending on if you
picked current average/6 month average etc). For example if you bought a set
for $20 and it had 4 parts equally the cost would be $5, however if two of the
parts average was $10 each and the other two were $1 each having a cost of $5
for each part wouldn't make sense. Having to work that out for each part
by hand is just way too time consuming, but if the system did it on part out
entry it would be awesome.
|
Use Brickstock to do that.
|
BrickStock doesn't have an option to calculate / add the MyCost per item.
|
I've read it's easier to add the costs on Brickstock and upload the file
than entering the costs one by one on Bricklink.
|
|
Author: | NelisSolis | Posted: | Mar 14, 2020 07:58 | Subject: | Re: Item cost auto worked out when parting out | Viewed: | 25 times | Topic: | Suggestions | |
| In Suggestions, Brickwilbo writes:
| In Suggestions, CaseyAF writes:
| Hi there,
Do you think a feature will be added in which when you part out a set you can
add in how much the set cost and then the system would calculate how much was
paid per piece? It's a pain adding it in individually especially when you
have over 300 items! It would be nice if a feature like this also worked out
how much each part cost based on how much they sell for (depending on if you
picked current average/6 month average etc). For example if you bought a set
for $20 and it had 4 parts equally the cost would be $5, however if two of the
parts average was $10 each and the other two were $1 each having a cost of $5
for each part wouldn't make sense. Having to work that out for each part
by hand is just way too time consuming, but if the system did it on part out
entry it would be awesome.
|
Use Brickstock to do that.
|
BrickStock doesn't have an option to calculate / add the MyCost per item.
|
|
Author: | Brickwilbo | Posted: | Mar 14, 2020 07:30 | Subject: | Re: Item cost auto worked out when parting out | Viewed: | 26 times | Topic: | Suggestions | |
| In Suggestions, CaseyAF writes:
| Hi there,
Do you think a feature will be added in which when you part out a set you can
add in how much the set cost and then the system would calculate how much was
paid per piece? It's a pain adding it in individually especially when you
have over 300 items! It would be nice if a feature like this also worked out
how much each part cost based on how much they sell for (depending on if you
picked current average/6 month average etc). For example if you bought a set
for $20 and it had 4 parts equally the cost would be $5, however if two of the
parts average was $10 each and the other two were $1 each having a cost of $5
for each part wouldn't make sense. Having to work that out for each part
by hand is just way too time consuming, but if the system did it on part out
entry it would be awesome.
|
Use Brickstock to do that.
|
|
Author: | KCFBricks | Posted: | Mar 14, 2020 05:21 | Subject: | Item cost auto worked out when parting out | Viewed: | 99 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
| Hi there,
Do you think a feature will be added in which when you part out a set you can
add in how much the set cost and then the system would calculate how much was
paid per piece? It's a pain adding it in individually especially when you
have over 300 items! It would be nice if a feature like this also worked out
how much each part cost based on how much they sell for (depending on if you
picked current average/6 month average etc). For example if you bought a set
for $20 and it had 4 parts equally the cost would be $5, however if two of the
parts average was $10 each and the other two were $1 each having a cost of $5
for each part wouldn't make sense. Having to work that out for each part
by hand is just way too time consuming, but if the system did it on part out
entry it would be awesome.
|
|
Author: | Acorn04 | Posted: | Mar 12, 2020 15:51 | Subject: | Re: Dealing with orders | Viewed: | 54 times | Topic: | Suggestions | |
| Is there an updated location for the BrickStock templates?
In Suggestions, tsrplatelayer writes:
|
|
Author: | Teup | Posted: | Mar 12, 2020 10:28 | Subject: | Re: Problem/bug with shipping minimum order | Viewed: | 31 times | Topic: | Suggestions | |
| Hey BL team, any update on this? It's quite annoying and I would still really
like it to get fixed sometime. Let me know if you need more details.
In Suggestions, Teup writes:
| I've never quite understood why you are not allowed to set the minimum order
of a shipping method lower than the minimum order of your store. It's annoying
because if you have 10 shipping methods, then anytime you want to change your
minimum order, you need to also change it 10x in your shipping methods, for no
real reason, because the "master setting", the store minimum order value, should
determine it already.
However, it seems it's also causing another problem: Buyers can use the bypass
password to get around the minimum order, but it does not help them go
around the minimum order of the shipping methods. The result is that anytime
a buyer used the bypass password, they are able to order but unable to select
any shipping methods. So there will need to be a manual invoice.
I'd propose removing the restriction for shipping methods to have a minimum
order value that is higher than or equal to the store minimum order value - in
fact, I'd propose for shipping methods not to need a minimum value at all.
That should solve everything I described without any side effects.
|
|
|
Author: | DrDrewBlood | Posted: | Mar 11, 2020 15:01 | Subject: | Re: Purist Custom Figures | Viewed: | 52 times | Topic: | Suggestions | |
| I was under the impression Rebrickable did this for builds but not figures. Can
you combine different parts of figures on Rebrickable? That may be a good platform
for this idea since it doesn't have the barriers that Bricklink has.
|
|
Author: | Classicsmiley | Posted: | Mar 11, 2020 14:47 | Subject: | Re: Purist Custom Figures | Viewed: | 44 times | Topic: | Suggestions | |
| In Suggestions, cosmicray writes:
| In Suggestions, DrDrewBlood writes:
| I would like a Purist Custom Figures catalog. People can submit pictures, descriptions,
and links to specific components. Buyers can click "add all to wanted list".
Picture Source: Reddit User pumpkinsunrise
|
What you are really asking for, is a method of taking an abstract collection
of official LEGO parts, and generating a BL compatible upload to a wanted list.
It doesn't have to be those figs, but they are a good example. It could be
for any abstract MOC.
I wonder how difficult it would be to run this on another site, and query the
BL catalog via the API ?
Nita Rae
|
Isn't this what Rebrickable is pretty much made for?
|
|
Author: | DrDrewBlood | Posted: | Mar 11, 2020 14:44 | Subject: | Re: Purist Custom Figures | Viewed: | 33 times | Topic: | Suggestions | |
| Thanks Nita for breaking it down like this. Another user suggested just that,
and linked Bricklink's instructions for generating such a list.
I'm going to explore this more and see what I learn. Obviously best-case
scenario is having this process available on Bricklink. But as many have pointed
out, there is a lot of red tape with an official LEGO site.
|
Author: | popsicle | Posted: | Mar 11, 2020 14:44 | Subject: | Re: Purist Custom Figures | Viewed: | 42 times | Topic: | Suggestions | |
| In Suggestions, DrDrewBlood writes:
| I remember reading about him when I was pre-med.
|
| Maybe he was the unconscious inspiration for my nametage.
|
Often how it works
| I'll put him on the list of custom figures I need to make. It'll be an homage.
|
I like that!
|
|
Author: | randyf | Posted: | Mar 11, 2020 14:39 | Subject: | Re: Purist Custom Figures | Viewed: | 31 times | Topic: | Suggestions | |
| In Suggestions, randyf writes:
| In Suggestions, DrDrewBlood writes:
| In Suggestions, DrDrewBlood writes:
| I would like a Purist Custom Figures catalog. People can submit pictures, descriptions,
and links to specific components. Buyers can click "add all to wanted list".
Picture Source: Reddit User pumpkinsunrise
|
Here is a picture of what I had in mind. The entire "Wanted List" portion may
need to be removed because of copyright issues.
In the very least, it would be cool to browse Purist Custom Figures, and see
what official parts they consist of.
|
This is not going to happen. As one of the other catalog admins already stated,
there is pretty much a 0% chance that anything custom will not get added to the
catalog.
Randy
|
That should have read "there is pretty much a 0% chance that anything custom
*will* get added to the catalog". Damn double negative...
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|