BrickLink Discussion Forum

LOL you are the OP.

Ok you changed my mind, we could use forum flair in addition to editing.

Author:

Adjour

Posted:

Nov 8, 2019 11:47

Subject:

Re: Forum Reforms

Viewed:

32 times

Topic:

Please don't get hung up on me saying "hundreds". Its just an example in
reply to the OP who is musing about why there isn't more traffic on the forum,
and wrongly, IMO, blaming it on the forum template.

You can't argue the fact that, like I said, "wholesome" posts are almost
completely ignored here. If people really want more forum participation,
then they need to stop treating other users they do not know yet like
they are stereo instructions and reach out and be friendly. It is my opinion
that the issues presented by the OP is not a template issue.

The issue in my opinion is that there isn't enough
interest to get more people using the forum

This is exactly my point.

Author:

Adjour

Posted:

Nov 8, 2019 11:43

Subject:

Re: Forum Reforms

Viewed:

32 times

Topic:

In Suggestions, SylvainLS writes:

In Suggestions, Adjour writes:

[…]
I remember a regular member posting a very nice collection photo because they
were excited about finishing or near finishing it iirc. I think it got two replies...

On Reddit, that same post would have got hundreds of positive replies. […]

On the other hand, 200 comments of “Good!” and “+1” aren’t fun to read either

To you maybe, but to the OP posting something personal, I'm sure they would
be thrilled. 200 is hyperbole for this site, anyway

I also believe that, as there are other forums that specialize in that sort of
posts, by comparison and by BL’s very nature, BL’s forum will always seem more
oriented towards selling/buying or cataloguing than MOCing or other news.

Right, which is why I don't get these occasional "omg where has tHe fAmIly
GoNE?" posts I see on here occasionally. If people really miss a wholesome forum
that "used to" exist, they should be reaching out to new member and stop acting
like this is some sort of old timers club. (not everyone obviously).

Heck, look at this post and how many replies it has. Lol

Author:

maxx3001

Posted:

Nov 8, 2019 10:14

Subject:

Re: Forum Reforms

Viewed:

52 times

Topic:

In Suggestions, jennnifer writes:

In Suggestions, bje writes:

The captain has therefor cordially invited you to dine at the ship's main
table once it is upright and our onboard chef can manage to cook you dodo a la
efof.

Regards

Paid for by Pals Tours

Excellent.

You brightened my morning considerably.

Jen

+1

Maxx

Author:

Nathan123

Posted:

Nov 8, 2019 10:08

Subject:

Re: Forum Reforms

Viewed:

40 times

Topic:

In Suggestions, Adjour writes:

My personal opinion is the format is largely fine. I modded for years on a v
bulletin based board and the only real feature I miss is editing ability.

What I noticed is wholesome posts are largely ignored here. People posting mocs
or collections are almost completely ignored while drama posts create long chains
of comments

I remember a regular member posting a very nice collection photo because they
were excited about finishing or near finishing it iirc. I think it got two replies...

On Reddit, that same post would have got hundreds of positive replies.

I know personally I've had a few cool post ideas, but I know if it's
not negative or dramatic they will only be met with crickets.

Again, just my opinion

The difference in size is probably why there could be hundreds of positive comments
and upvotes while being met with silence here. Here there cannot be more than
a couple hundred people looking at the BL forum for any significant amount of
time from day to day. The issue in my opinion is that there isn't enough
interest to get more people using the forum but the other problem is that if
more people were to use the forum it would become harder to use as posts would
get buried that much faster.

Author:

SylvainLS

Posted:

Nov 8, 2019 09:48

Subject:

Re: Forum Reforms

Viewed:

46 times

Topic:

In Suggestions, Adjour writes:

On the other hand, 200 comments of “Good!” and “+1” aren’t fun to read either

Author:

Adjour

Posted:

Nov 8, 2019 09:37

Subject:

Re: Forum Reforms

Viewed:

43 times

Topic:

Author:

jennnifer

Posted:

Nov 8, 2019 09:36

Subject:

Re: Forum Reforms

Viewed:

46 times

Topic:

In Suggestions, bje writes:

The captain has therefor cordially invited you to dine at the ship's main
table once it is upright and our onboard chef can manage to cook you dodo a la
efof.

Regards

Paid for by Pals Tours

Excellent.

You brightened my morning considerably.

Jen

Author:

Hsousa

Posted:

Nov 8, 2019 09:19

Subject:

Re: Forum Reforms

Viewed:

40 times

Topic:

In Suggestions, paulvdb writes:

In Suggestions, Hsousa writes:

Hello there, thank you for replying.

However I wanted to know if there's a way of, when clicking on a thread,
displaying the entire thread? There's an additional click on the "Entire
thread on one page" link every time I want to read a thread.

To rephrase, I want to open the foruns in "Compact" mode (done), but open the
threads in "Entire thread on one page". Is it possible?

You can click on the text bubble icon in front of the topic title to display
the entire thread on one page.

Cheers, that helped !

Author:

paulvdb

Posted:

Nov 8, 2019 09:16

Subject:

Re: Forum Reforms

Viewed:

44 times

Topic:

In Suggestions, Hsousa writes:

You can click on the text bubble icon in front of the topic title to display
the entire thread on one page.

Author:

Hsousa

Posted:

Nov 8, 2019 09:10

Subject:

Re: Forum Reforms

Viewed:

45 times

Topic:

Author:

Nathan123

Posted:

Nov 8, 2019 04:23

Subject:

Re: Forum Reforms

Viewed:

63 times

Topic:

In Suggestions, Admin_Russell writes:

In Suggestions, Nathan123 writes:

It seems the forum isn't getting the same kind of community involvement as
it once did. It is fairly common to see less than 100 messages per day and I
had to go back to July to find a day that had over 200. The way the forum works
right now it can be very frustrating and time consuming finding posts of interest
as even new posts get buried quickly under 2 or 3 more active posts and that
makes it difficult to participate in the forum if you do not have the time to
browse or search through it. In terms of utility the bricklink forum is not as
easy to use and enjoy as say brickset forum. There are a lot of good parts of
the BL forum but I feel it is largely being ruined.

My suggestion is that when a post is responded to the post itself moves to the
top but it doesn't show up as a new message, so if a post is made and has
10 replies it will still just look like one post on the forum. I would also like
to recommend that certain categories get put into a different area apart from
the forum so maybe for example buying and selling, inventory change requests,
and sales posts could be seperated from the rest so they don't bury the rest
of the posts out there and stagnate the forum.

The goal would be to allow more people and ideas to participate in the community.

There are certainly some improvements to be made - pinning posts, notification
/ subscription plans, ability to edit or completely remove posted material -
but most of what you are asking for here can already be done.

First, the BrickLink Discussions Forum is actually many individual Forums all
joined together, including hidden Forums backstage for our community admins.
If you don't wish to read everything, start on this page and read only what
interests you:

https://www.bricklink.com/messageTopics.asp?utm_content=subnav

Second, you can customize the Forum to your exact specifications, including viewing
each thread without the replies. You can also block certain Forums (e.g. sales
posts). See the settings on this page:

https://www.bricklink.com/messageFilter.asp?viewFrom=P

I've never seen a Forum with this level of user customization, and I believe
most members don't even know about these options. Try out these suggestions
and see if that helps your impression.

I have been reading the Forum consistently for over 10 years, and I've noticed
that like rainy and dry periods with the weather, Forum participation ebbs and
flows with time. And if by "community involvement" you mean people like Foster
and Dan/Jon beating each other up on a regular basis, that sort of behavior isn't
tolerated anymore.

Thank you for this information! I had no clue those options already existed although
I probably should have. It could be that the forum is just in one of those periods
of decreased participation but from the stats it doesn't seem like it has
really changed all that much in about 9 months...to me it seems it should be
busier and for whatever the reason is, it is apparent the forum just has not
grabbed people's interest.

Author:

bje

Posted:

Nov 8, 2019 03:25

Subject:

Re: Forum Reforms

Viewed:

52 times

Topic:

In Suggestions, maxx3001 writes:

In Suggestions, calsbricks writes:

In Suggestions, jennnifer writes:

In Suggestions, Nathan123 writes:

I love the way this old Forum works. Sorry if I am in the minority. I would argue
that the lack of community involvement is directly related to the management's
antipathy.

Jen

+ several

+ a number of mine

If management is lacking, why use the forum, you can ask, suggest all you like,
it won’t change a thing.

BrickLink is going the way of the Dodo, while sailors are eating on.....

snip

Good Morning Sir

We have forwarded the concerns you raised about your paid for passage on the
good ship "Indifference" to the owners, White Star Line.

As your travel agents, let us at this time say that we were extremely concerned
about your reports of experiencing a sinking feeling whilst using ship ameneties.

White Star Lines in fact assured us this state of affairs is entirely normal.
The ship is in fact keeled over and at no point in time should passengers be
concerned as this is a permanent feature of the ship. The captain and staff should
have assured you that the line had the ship built for the express purpose of
setting a world record for the time it takes for keeled over ship to self-right.

Your request for a waiver of fees for passage has, as a result, regrettably been
denied as the owners are of the view that the reasonable amount you paid for
passage cannot ever be negated by the fact that you expect far too much in life.
The captain has therefor cordially invited you to dine at the ship's main
table once it is upright and our onboard chef can manage to cook you dodo a la
efof.

Regards

Paid for by Pals Tours

Author:

Admin_Russell

Posted:

Nov 8, 2019 03:12

Subject:

Re: Forum Reforms

Viewed:

124 times

Topic:

In Suggestions, Nathan123 writes:

Author:

Nathan123

Posted:

Nov 8, 2019 02:37

Subject:

Re: Forum Reforms

Viewed:

41 times

Topic:

In Suggestions, maxx3001 writes:

In Suggestions, calsbricks writes:

In Suggestions, jennnifer writes:

In Suggestions, Nathan123 writes:

I love the way this old Forum works. Sorry if I am in the minority. I would argue
that the lack of community involvement is directly related to the management's
antipathy.

Jen

+ several

+ a number of mine

If management is lacking, why use the forum, you can ask, suggest all you like,
it won’t change a thing.

BrickLink is going the way of the Dodo, while sailors are eating on.....

At this point it is just a money generating donkey, pulling a load to heavy for
its back

Why not ask though? Maybe it is unlikely anything improves but if no one wants
improvements then it will never happen. Wanting the forum to be more interesting
and grow the number of people wjo use it seems like is shouldn't be beyond
expectations.

Author:

Nathan123

Posted:

Nov 8, 2019 02:26

Subject:

Re: Forum Reforms

Viewed:

41 times

Topic:

In Suggestions, JusTiCe8 writes:

In addition to what others wrote, you can click on "all" link on top and you'll
get new replies to old topics.

The whole website needs work, but forum is far down below the needto list I guess.

In Suggestions, Nathan123 writes:

It seems the forum isn't getting the same kind of community involvement as
it once did. It is fairly common to see less than 100 messages per day and I

[...]

The goal would be to allow more people and ideas to participate in the community.

The forum itself doesn't generate very much business or interest for that
matter but if we don't ask for improvements we shouldn't be surprised
when nothing happens.

Author:

Nathan123

Posted:

Nov 8, 2019 02:21

Subject:

Re: Forum Reforms

Viewed:

37 times

Topic:

In Suggestions, jennnifer writes:

In Suggestions, Nathan123 writes:

I love the way this old Forum works. Sorry if I am in the minority. I would argue
that the lack of community involvement is directly related to the management's
antipathy.

Jen

You don't have to apologize for having a different opinion. My point is that
the forum needs help.l It looks like the forum is getting less and less use despite
supposedly more people signing up as buyers than ever before.

Author:

maxx3001

Posted:

Nov 8, 2019 01:37

Subject:

Re: Forum Reforms

Viewed:

58 times

Topic:

In Suggestions, calsbricks writes:

In Suggestions, jennnifer writes:

In Suggestions, Nathan123 writes:

I love the way this old Forum works. Sorry if I am in the minority. I would argue
that the lack of community involvement is directly related to the management's
antipathy.

Jen

+ several

+ a number of mine

Author:

JusTiCe8

Posted:

Nov 8, 2019 01:31

Subject:

Re: Forum Reforms

Viewed:

39 times

Topic:

It seems the forum isn't getting the same kind of community involvement as
it once did. It is fairly common to see less than 100 messages per day and I

[...]

The goal would be to allow more people and ideas to participate in the community.

Author:

calsbricks

Posted:

Nov 8, 2019 01:28

Subject:

Re: Forum Reforms

Viewed:

49 times

Topic:

In Suggestions, jennnifer writes:

In Suggestions, Nathan123 writes:

I love the way this old Forum works. Sorry if I am in the minority. I would argue
that the lack of community involvement is directly related to the management's
antipathy.

Jen

+ several

Author:

jennnifer

Posted:

Nov 8, 2019 01:13

Subject:

Re: Forum Reforms

Viewed:

73 times

Topic:

In Suggestions, Nathan123 writes:

I love the way this old Forum works. Sorry if I am in the minority. I would argue
that the lack of community involvement is directly related to the management's
antipathy.

Jen

Author:

Nathan123

Posted:

Nov 7, 2019 22:48

Subject:

Re: Forum Reforms

Viewed:

57 times

Topic:

In Suggestions, dearlydeparted writes:

I agree that the forum can be tedious. The interface and lack of features compared
to other sites is antiquated. Would be nice to be able to edit for one and a
notification feature with link when someone responds to your post - just to name
a few.

Those are good ideas! I guess the forum already has a button to hide the replies
but it doesn't move the posts up and I would argue it should be the default
setting. If people don't see something that interests them right away they
are not as likely to stay, read, and participate.

Author:

legoman77

Posted:

Nov 7, 2019 22:45

Subject:

Re: Forum Reforms

Viewed:

57 times

Topic:

In Suggestions, Nathan123 writes:

It seems the forum isn't getting the same kind of community involvement as
it once did. It is fairly common to see less than 100 messages per day and I
had to go back to July to find a day that had over 200. The way the forum works
right now it can be very frustrating and time consuming finding posts of interest
as even new posts get buried quickly under 2 or 3 more active posts and that
makes it difficult to participate in the forum if you do not have the time to
browse or search through it. In terms of utility the bricklink forum is not as
easy to use and enjoy as say brickset forum. There are a lot of good parts of
the BL forum but I feel it is largely being ruined.

My suggestion is that when a post is responded to the post itself moves to the
top but it doesn't show up as a new message, so if a post is made and has
10 replies it will still just look like one post on the forum. I would also like
to recommend that certain categories get put into a different area apart from
the forum so maybe for example buying and selling, inventory change requests,
and sales posts could be seperated from the rest so they don't bury the rest
of the posts out there and stagnate the forum.
The goal would be to allow more people and ideas to participate in the community.

Nope. I am old and hate change of any kind. My middle name is Luddite.
John P

Author:

dearlydeparted

Posted:

Nov 7, 2019 22:28

Subject:

Re: Forum Reforms

Viewed:

65 times

Topic:

Author:

Nathan123

Posted:

Nov 7, 2019 21:43

Subject:

Forum Reforms

Viewed:

304 times

Topic:

Status:

Open

Vote:

[Yes|No]

Author:

xboxnissan

Posted:

Nov 5, 2019 17:45

Subject:

Personal Inventory, Shareable

Viewed:

81 times

Topic:

Status:

Open

Vote:

[Yes|No]

Just like Discogs where you can put into an inventory what you have (they name
it collection), it would be interesting to have such a feature.

It's basically a display without having to sell (i.e. right now you have
to be a seller to have an inventory).

I'm using currently wish list of the set I got at the moment and transfered
them into another wish list once I was done rebuilding it... I mean it works
but it's not exactly what wish lists are for!

Author:

phinto

Posted:

Nov 5, 2019 14:06

Subject:

Re: Bricklink Discord

Viewed:

70 times

Topic:

In Suggestions, phinto writes:

In Suggestions, DerekThomasp89 writes:

I recently upgraded the discord channel to add a few new channels, were still
looking for members to make this server a success.

Please come on over and join us

we don't bite.. hard

https://discord.gg/xhTDz3s

hey... I need a reinvite for bricklink server

https://discord.gg/XtQryK7

Author:

phinto

Posted:

Nov 4, 2019 16:08

Subject:

Re: Bricklink Discord

Viewed:

88 times

Topic:

In Suggestions, DerekThomasp89 writes:

I recently upgraded the discord channel to add a few new channels, were still
looking for members to make this server a success.

Please come on over and join us

we don't bite.. hard

https://discord.gg/xhTDz3s

hey... I need a reinvite for bricklink server

Author:

phinto

Posted:

Nov 4, 2019 15:23

Subject:

florecent trans-colors

Viewed:

120 times

Topic:

Status:

Open

Vote:

[Yes|No]

we are working on a new generation of creativity
the first image are the kanohi custom i made for Bionicle kanoko.
we love to have new florescent trans-colors.
we have red-orange, neon-lime, florescent-medium-blue. the rarest of all are
neon-bright-yellow and hot-dark-pink that needs work because its not like the
one I remember. because its too dark, and the real deal really pink. described
in the 2nd image.
plus, we need new florescent colors
like... different colors that glow under UVlight. as described in the 3nd image
I got from google.

so the new colors we want/need to try are

neon-turquoise = (neon-green & medium-blue)

florescent-lavender = (hot-pink & medium-blue)

bright-coral = (hot-pink & red-orange)

I hope you like my ideas.

Author:

VOTB

Posted:

Oct 31, 2019 20:25

Subject:

Re: Adding box contents for sets?

Viewed:

47 times

Topic:

I have a source where occasionally I have just a giant tub of bags (no boxes
no instructions). The price per pound is only worth it if they are decent so
I want to hunt out the good ones.

The best I have come up with identifying a set by looking at some unique parts.
Then on brothersbrick.com find their review. They usually will lay out all
the bags and take a photo. I can usually identify what I have pretty easily.

I scored the last time and spent $70 and got $890 worth of parted out pieces.
This is not normal but it just worked out. On the other hand, I have just grabbed
$50 by weight and parted them out for $75.

When you have a full set it is much easier to part out than one bag of an unidentified
set. Plus multiple bags will usually lead to higher lot counts.

Author:

randyf

Posted:

Oct 31, 2019 09:28

Subject:

Re: Adding box contents for sets?

Viewed:

42 times

Topic:

In Suggestions, yorbrick writes:

For example: I have a Legofactory "SKYLINE" SET #5562 new open box with just
one numbered bag missing all the other numbered bags are present and sealed.
Trying to determine what pieces are missing from the set is quite a challenge!

Look in the instructions. When you come to a page for which you don't have
the bag, then you know which bag is missing. The following pages will be the
parts you are missing.

Unfortunately, the instructions for that set do not do that.

Author:

mzehnder

Posted:

Oct 31, 2019 09:23

Subject:

part condition "damaged"

Viewed:

132 times

Topic:

Status:

Open

Vote:

[Yes|No]

It would be nice not only to have a "new" and "used" condition but also a "damaged"
for parts. E.g. the 2490px2 often has broken clips and is still sold. But searching
for intact parts is a bit time consuming.

I didn't find out if someone else already asked for this feature.

Author:

yorbrick

Posted:

Oct 31, 2019 05:24

Subject:

Re: Adding box contents for sets?

Viewed:

39 times

Topic:

I'm not sure how many folks would be interested in that information, but
in the last year I've probably had questions on the contents for close to
10 different sets.

What are you doing with the sets? If you are parting them out, then it is not
really needed. If you are building them, again it is not needed. I can only see
it will be useful if you want to sell the set as a new but opened set although
then you will either have to try to buy a complete sealed bag or buy the new
parts that were in that bag. For the latter case, one bag will still be open
so the value of that set is not really going to be any different to a set in
which all the bags were opened to check the inventory.

It seems a lot of work to do this for every set for under 10 sets per year, when
there are other ways of selling / using those sets.

It also doesn't fit in with the idea that the base inventories for new sets
could be extracted from LEGO's main server, with extras added when inventories
are checked (which I think was planned at some stage) as LEGO doesn't give
this information by bag.

Author:

yorbrick

Posted:

Oct 31, 2019 05:14

Subject:

Re: Adding box contents for sets?

Viewed:

45 times

Topic:

Look in the instructions. When you come to a page for which you don't have
the bag, then you know which bag is missing. The following pages will be the
parts you are missing.

Author:

wittco

Posted:

Oct 31, 2019 02:37

Subject:

Re: Adding box contents for sets?

Viewed:

38 times

Topic:

In Suggestions, wittco writes:

In Suggestions, sbpyrat writes:

I was wondering if there'd be a possibility of adding box contents to LEGO
sets on here. Something like listing the number of each bag, unmarked bags/unbagged
parts, etc.

I deal with a lot of secondhand sets and come across sets with open boxes (or
like today no boxes), but sealed bags of parts. Today I scored 14/17 numbered
backs for set 10237 Tower of Orthanc. I almost missed out on getting the second
bag #3 because it didn't obviously go with the other bags. Thankfully I
was able to find an old unboxing video on YouTube and figured out I'm missing
3 numbered bags (#1, #4, and one of the two #5s), plus the unnumbered eagle bag.
But usually when I'm in this situation, I haven't been so lucky. It's
especially tricky with sets that have unnumbered bags. I usually end up opening
them to do the inventory if I'm uncertain, but it would be nice to keep them
sealed and be able to know what was missing.

I'd be willing to provide the list for any new sets I open, if it might help
someone else out down the line. It seems like a fairly easy thing and I'm
surprised that, at least as far as I'm aware, there isn't somewhere to
find this information easily (at least for modern sets). Bricklink seems like
a natural place for this information to exist.

I'm not sure how many folks would be interested in that information, but
in the last year I've probably had questions on the contents for close to
10 different sets.

Anyway, I'm not even sure if this is the appropriate place to mention it,
but I thought I'd give it a shot.

I would "love" a function like this. I buy a lot of older collectible sets many
times with unopened bags. Figuring out what is in specific "bags" (numbered or
un-numbered) let alone figuring out what pieces are missing knowing that a specific
numbered bag is missing presents a real challenge!

Author:

wittco

Posted:

Oct 31, 2019 02:35

Subject:

Re: Adding box contents for sets?

Viewed:

35 times

Topic:

In Suggestions, wittco writes:

In Suggestions, sbpyrat writes:

Author:

wittco

Posted:

Oct 31, 2019 01:43

Subject:

Re: Adding box contents for sets?

Viewed:

43 times

Topic:

In Suggestions, sbpyrat writes:

Author:

Teup

Posted:

Oct 30, 2019 07:39

Subject:

Re: Adding box contents for sets?

Viewed:

36 times

Topic:

In Suggestions, Teup writes:

In Suggestions, sbpyrat writes:

I see why you need it, but I wouldn't count on this happening. Changing from
set inventories to bag inventories would mean multiplying the entire inventory
database by, what, a factor 5? Moreover, all set inventories will need to be
compiled manually without the help of the inventory list in instructions or on
boxes. It would be a heck of a lot of continuous work (are you going to do it?),
and per set it will only ever be consulted a handful of times (if ever).

You're not the only one who ran into this, and I'm not saying it's
necessarily a bad idea, but my advice would be.. I wouldn't wait for this

Besides, I think you can figure out what you're missing from the instructions?
As far as I know most sets are built a bag at a time, so if you follow through
the episode for the bags you're missing you should be able to get yourself
a list of parts you're missing. Haven't done this but could work?

Author:

Teup

Posted:

Oct 30, 2019 07:37

Subject:

Re: Adding box contents for sets?

Viewed:

42 times

Topic:

In Suggestions, sbpyrat writes:

Author:

Soviet

Posted:

Oct 30, 2019 04:52

Subject:

Re: Adding box contents for sets?

Viewed:

49 times

Topic:

In Suggestions, sbpyrat writes:

It looks like it's requested a lot and indeed would be very useful for people
completing sets. But it would require a lot of work from the community to painstakingly
create such information for every set. It would also need additional funcionality
from the site so I don't see it happening in this millenium.

Author:

sbpyrat

Posted:

Oct 30, 2019 02:15

Subject:

Adding box contents for sets?

Viewed:

99 times

Topic:

Status:

Open

Vote:

[Yes|No]

Author:

SylvainLS

Posted:

Oct 27, 2019 15:59

Subject:

Re: Four New Stud.io Pieces

Viewed:

41 times

Topic:

In Suggestions, FlamesFire101 writes:

Four pieces that I would like to see added are:

Black Large Figure Torso Skeletal with Gear Hips / Waist / Bottom

Pearl Dark Gray Large Figure Torso Skeletal Connector with 2 Ball Joints

Flat Silver Bionicle Armor Uniter with 2 Pin Holes on Front, Axle and Pin Holes
on Sides

Pearl Gold Bionicle Armor Uniter with 2 Pin Holes on Front, Axle and Pin Holes
on Sides

These four would be very good for 2016 uniter mocs, as it is currently difficult
to make them

Use the dedicated forum for Studio: http://forum.bricklink.com/
There’s a whole subforum for missing parts.

Author:

FlamesFire101

Posted:

Oct 27, 2019 15:24

Subject:

Four New Stud.io Pieces

Viewed:

64 times

Topic:

Status:

Open

Vote:

[Yes|No]

Author:

SylvainLS

Posted:

Oct 27, 2019 07:33

Subject:

Re: Stud.io Piece not found and needs to be added

Viewed:

38 times

Topic:

In Suggestions, november3 writes:

stud.io is missing some pieces which I know but it has the majority of star wars
custom peices exept for 1 and heres 1 I need:

Trans-Red Dish 4 x 4 Inverted (Radar) with Solid Stud with Radial TIE Fighter
Cockpit Pattern

Use the dedicated forum for Studio: http://forum.bricklink.com/
There’s a whole subforum for missing parts.

Author:

november3

Posted:

Oct 27, 2019 00:45

Subject:

Stud.io Piece not found and needs to be added

Viewed:

58 times

Topic:

Status:

Open

Vote:

[Yes|No]

Author:

popsicle

Posted:

Oct 18, 2019 13:20

Subject:

Re: Custom minis

Viewed:

123 times

Topic:

In Suggestions, AZbrickGUY writes:

Hey all,
Has there ever been a spot for custom minis? Any way we could add
a spot? Mainly MOC out of existing parts that are out there. Not hand made or
painted parts. Thanks.

I’d support it. I’s been put forth and discussed from time to time, but never
implemented.

As long as all the parts are genuine Lego, I vote yea.

But then again, I have skin in the game: https://store.bricklink.com/popsicle&itemID=132920648

-Cory

Author:

cycbuild

Posted:

Oct 18, 2019 06:23

Subject:

Re: Custom minis

Viewed:

32 times

Topic:

In Suggestions, yorbrick writes:

In Suggestions, AZbrickGUY writes:

Hey all,
Has there ever been a spot for custom minis? Any way we could add
a spot? Mainly MOC out of existing parts that are out there. Not hand made or
painted parts. Thanks.

Yes, you can add them to your store as a custom figure.

I don't understand the system in place, because the only minifigures in the
MOC character category are pad printed. And if you visit the Custom Items,
the actual mini MOCs are still buried by the homebrew plastic listings.

There's probably wide community out there, looking for this. Eurobricks enthusiasts,
for one. There's definitely overlap with BrickLink there. Personally, I keep
posting figgy projects in the forum and people still click on those (thank you),
so maybe we'd see more mini MOCs if there was a proper place for them?

Author:

yorbrick

Posted:

Oct 18, 2019 04:49

Subject:

Re: Custom minis

Viewed:

28 times

Topic:

In Suggestions, AZbrickGUY writes:

Hey all,
Has there ever been a spot for custom minis? Any way we could add
a spot? Mainly MOC out of existing parts that are out there. Not hand made or
painted parts. Thanks.

Yes, you can add them to your store as a custom figure.

Author:

cycbuild

Posted:

Oct 18, 2019 00:40

Subject:

Re: Custom minis

Viewed:

42 times

Topic:

In Suggestions, AZbrickGUY writes:

Hey all,
Has there ever been a spot for custom minis? Any way we could add
a spot? Mainly MOC out of existing parts that are out there. Not hand made or
painted parts. Thanks.

+1

It would be nice to have a distinction between customs and MOCs. Add a minifig
category to the MOC Shop?

Author:

AZbrickGUY

Posted:

Oct 18, 2019 00:20

Subject:

Custom minis

Viewed:

114 times

Topic:

Status:

Open

Vote:

[Yes|No]

Hey all,
Has there ever been a spot for custom minis? Any way we could add
a spot? Mainly MOC out of existing parts that are out there. Not hand made or
painted parts. Thanks.

Author:

Emporiosa

Posted:

Oct 17, 2019 17:56

Subject:

Re: Very necessary suggestion?

Viewed:

85 times

Topic:

In Suggestions, axaday writes:

They aren't getting added or approved anymore, except in special circumstances.
A SWAT van won't qualify.

I agree with the suggestion. I'd like to see any vehicle that someone submitted
get approved and inventoried and added to the set inventory. But I think the
ones that were added didn't sell really well or for more than their parts,
so Bricklink didn't see it as worth the time.

In Suggestions, yorbrick writes:

In Suggestions, net1986 writes:

Hello! I'm net1986 from South Korea!
I would like to suggest something today.

First of all I apologize for my poor English grammar, please understand.

This is what I would suggest this time.

"I wish there was function to view information of just part product from the
set, Not whole set. And function to order those just part product."

For example,
1. I want to get only police swat van from set 60008 Museum Break-in.(don't
need any part like figs or Museum)
2. But there is only brick information for whole set(Unnecessary a lot of information
confuses me)
3. It takes a lot of hard work to analyze for only just the swat van.
4. And It's very hard to order each part brick for the van

What I mean is that I wish there was a function to view a only part product(just
swat van of set 60008)and I wish I would order those part in way "easy buy".

I know that the "east buy" function already exists.
It's very helpful for restorers.
But now, It adjust only set product or MOC product as I know.

So, I wish the "easy buy" function is more enhanced(add part product from set)

I hope you guys understand my words.
reply me, thanks.
Best regard,

This already exists, for some sets, via special assemblies.

https://www.bricklink.com/catalogList.asp?catType=P&catString=961

But still, someone has to go through the manual working out what parts are needed
for each assembly.

I actually added a couple of special assemblies such as the Whomping Willow and
the Ford Anglia, and being one of the one sellers for each, those sold almost
immediately, even after listing them again. Another one I did was the Giant Ant-man
- sold 2 of them instantly after posting them.

But as Randy mentioned, it sounds like a nightmare for them to try to manage
so I can understand why they only did a small test run. It's unfortunate
though, because a site like BL is perfect for people looking for just these parts
of the sets.

Author:

maxx3001

Posted:

Oct 17, 2019 12:06

Subject:

Re: Very necessary suggestion?

Viewed:

46 times

Topic:

In Suggestions, net1986 writes:

In Suggestions, Teup writes:

In Suggestions, net1986 writes:

Maybe this would have drawbacks of its own, not sure if it's a good idea
but I'm just thinking out loud...

That's why I suggest !!

I think My idea is good for seller who sell incomplete set and good for buyer
who want to collect for just part product from set.

Anyway, thanks for your agree
and I'm very moved for the you guys' reply
(This is my first post of Forum in using foreign language)
Have a nice day

And it was well written and structured, thank you

Author:

randyf

Posted:

Oct 17, 2019 11:18

Subject:

Re: Very necessary suggestion?

Viewed:

48 times

Topic:

In Suggestions, axaday writes:

I agree with the suggestion. I'd like to see any vehicle that someone submitted
get approved and inventoried and added to the set inventory. But I think the
ones that were added didn't sell really well or for more than their parts,
so Bricklink didn't see it as worth the time.

Actually, the reason they are on hold for further additions is due to site limitations
that make it very hard for the inventories of these items to be administered.
The main limitations are two-fold: (1) these inventories cannot have alternates
at present so alternates must be tracked through inventory notes, and (2) these
inventories must be manually kept in sync with set inventories when changes are
made to the set inventories that they are in. You can see that if we rapidly
expanded these additions to the catalog, it would quickly become an administration
nightmare.

Cheers,
Randy

Author:

SylvainLS

Posted:

Oct 17, 2019 11:11

Subject:

Re: Very necessary suggestion?

Viewed:

30 times

Topic:

In Suggestions, yorbrick writes:

[…]
But it means sellers must use common sense when pricing them.

I still don’t understand why it’s “common sense” when it’s anything but common
(the same in French)

Author:

Teup

Posted:

Oct 17, 2019 11:06

Subject:

Re: Very necessary suggestion?

Viewed:

27 times

Topic:

In Suggestions, yorbrick writes:

That shouldn't affect the prices of sets sold as complete so there is no
reason to stop selling those. But yes, incomplete sets can be anything from almost
complete to a few bricks. But it means sellers must use common sense when pricing
them.

But isn't there only one single entry for used sets in the price guide, regardless
of completeness?

Author:

axaday

Posted:

Oct 17, 2019 10:59

Subject:

Re: Very necessary suggestion?

Viewed:

43 times

Topic:

In Suggestions, net1986 writes:

Author:

bje

Posted:

Oct 17, 2019 10:45

Subject:

Re: Very necessary suggestion?

Viewed:

40 times

Topic:

In Suggestions, yorbrick writes:

It's awesome!!
Why couldn't I find it, special assembly??
And very thanks for the link and new world!!
have a nice day!!

It doesn't work at all well at the moment. You have to know one exists to
find it. Or you can look through the inventory of every set, and right down the
bottom under counterparts you will find the assembly(ies) if it(they) exists.

Or browse https://www.bricklink.com/catalogList.asp?catType=P&catID=961

Must the item be in hand for it to be added and inventoried?

Author:

net1986

Posted:

Oct 17, 2019 10:34

Subject:

Re: Very necessary suggestion?

Viewed:

52 times

Topic:

In Suggestions, Teup writes:

In Suggestions, net1986 writes:

It's probably a lot of catalog work to break sets into separate components,
but I see a huge advantage: It would solve the pricing problem with "incomplete"
sets. Currently people are listing sets for half of its value because minifigs
or other major parts of the set are missing. That messes up the priceguide completely
and is the main reason why I have abandoned selling sets completely. There are
just too many nonsensical listings.
If for starters there would be a separate entry for sets without the minifigs,
and an entry for the minifigs, that'd already help.

Maybe this would have drawbacks of its own, not sure if it's a good idea
but I'm just thinking out loud...

Author:

net1986

Posted:

Oct 17, 2019 10:27

Subject:

Re: Very necessary suggestion?

Viewed:

41 times

Topic:

In Suggestions, yorbrick writes:

In Suggestions, net1986 writes:

It's awesome!!
Why couldn't I find it, special assembly??
And very thanks for the link and new world!!
have a nice day!!

Author:

Teup

Posted:

Oct 17, 2019 09:44

Subject:

Re: Very necessary suggestion?

Viewed:

55 times

Topic:

In Suggestions, net1986 writes:

Author:

net1986

Posted:

Oct 17, 2019 09:29

Subject:

Very necessary suggestion?

Viewed:

210 times

Topic:

Status:

Open

Vote:

[Yes|No]

Author:

Graham.

Posted:

Oct 10, 2019 15:33

Subject:

Communication difficulties

Viewed:

151 times

Topic:

Status:

Open

Vote:

[Yes|No]

The first is folks sending messages directly to my PayPal and BrickLink notifications
email address. Which I don’t check on a regular basis.

Wouldn’t it be better all round if the user email address were hidden? therefore
emails would have to go thru the message system.

Leads to the second. BrickLink notifications are often delayed by two or three
days, then they all come thru together. Which is why I don’t check that mail
box often. Fairly frequently I receive the order placed notification AFTER I
have shipped the order!

I check messages on site, every morning when I first log on.

Also would benefit BrickLink as it would be far more difficult to trade off site,
if anyone were so inclined.

Please give this some consideration, it works well on the other place.

Thanks, Graham

Author:

Give.Me.A.Brick

Posted:

Oct 9, 2019 08:00

Subject:

Re: Classic Wanted List Unavailable on June 5th

Viewed:

95 times

Topic:

In Administrative, DadsAFOL writes:

In Administrative, Admiral_Brick writes:

Hello Jaclyn,

one year ago BL changed a wanted list key feature. Are you and the developers
even aware of it?

When clicking on "Wanted List" after entering a store, BL shows me the items
this store offers which are on my wanted list. Before the update, the list only
contained the items from my wanted list which were priced below my max prices.

This changed with the update of the store fronts: Now always *all* items are
being shown. The only difference is, that the "Max price:" information of items
with prices higher than my max prices is being shown in red letters.

Too much information! I do not want to scroll through the bigger part of my wanted
list every time, I simply want to know quickly which items from my wanted list
are available for a good price in a specific store... no chance. I have not used
my wanted list for a year now.

Kind regards,

Matthias

I agree, I had forgotten about this. I think its part of the store display,
not the wanted list functions, but I agree. It is a huge pain to see unfiltered
wanted list matches in each store. Please add the filter options back!
1. Store price
2. Store quantity = wanted list min quantity
3. Both price and quantity match.

Thanks!

Has this issued been sorted out? Or are there any tweaks?

When inside a store, is there way to see only the items on my wanted list *below*
my max price?

Thank you.

Author:

minithings4life

Posted:

Oct 7, 2019 07:54

Subject:

Re: Database for inventory

Viewed:

73 times

Topic:

Brickset is a good way of doing that.

In Suggestions, jakyasar writes:

Hi all

As the number of sets/pieces growing, I need to start cataloging my inventory
to avoid double purchases.

Any recommendations for such program to keep track of inventory is appreciated.

Thank you

Author:

Hurt

Posted:

Oct 7, 2019 07:16

Subject:

Re: Database for inventory

Viewed:

38 times

Topic:

Hi!

As you're a seller, you can use "Stockrooms" here on bricklink. By default
there is only one Stockroom, but you can enable 3 Stockrooms in the settings
(A, B and C). You could use one of them for your personal collection for example
- that would be the easiest solution without any additional program or website.

Kind regards,
Michael

In Suggestions, jakyasar writes:

Author:

jakyasar

Posted:

Oct 7, 2019 07:10

Subject:

Database for inventory

Viewed:

99 times

Topic:

Status:

Open

Vote:

[Yes|No]

Author:

yorbrick

Posted:

Sep 30, 2019 09:18

Subject:

Re: Limit Shipping Method to One Customer

Viewed:

64 times

Topic:

In Suggestions, axaday writes:

In Suggestions, yorbrick writes:

In Suggestions, axaday writes:

I just opened a shipping method that I keep closed to avoid confusion because
it allows an international customer to instant checkout using domestic shipping
rates. It is for international customers who have a friend or forwarding service
in the US, but I keep it closed to avoid accidental or intentional misuse. It
would be handy if I could limit that to a country or to a specific user.

Is it not easier to invoice manually for such situations.

Possibly. I used to get a lot of international orders made and then cancelled
because the shipping is over $20 over 8 ounces. Usually customers are willing
to pay the $13ish shipping for 1-8 oz, but rarely did an order over 9 ounces
go through. I so stopped offering wait for invoice for international orders
and capped the instant checkout at 7 ounces. Perhaps that is too strict and
I should think it over.

Yeah, I'm sure. I've stopped buying from the USA for that reason.

Maybe put a line in your terms about what it will cost for international orders
for a couple of weight bands and turn on quotes (if you haven't already)
to allow international buyers to ask for postage costs if they need to.

Author:

axaday

Posted:

Sep 30, 2019 08:56

Subject:

Re: Limit Shipping Method to One Customer

Viewed:

29 times

Topic:

In Suggestions, yorbrick writes:

In Suggestions, axaday writes:

Is it not easier to invoice manually for such situations.

Author:

yorbrick

Posted:

Sep 30, 2019 07:58

Subject:

Re: Limit Shipping Method to One Customer

Viewed:

37 times

Topic:

In Suggestions, axaday writes:

Is it not easier to invoice manually for such situations.

Author:

axaday

Posted:

Sep 30, 2019 06:10

Subject:

Limit Shipping Method to One Customer

Viewed:

97 times

Topic:

Status:

Open

Vote:

[Yes|No]

Author:

Brahrp

Posted:

Sep 28, 2019 14:18

Subject:

Re: Classic Wanted List Unavailable on June 5th

Viewed:

109 times

Topic:

old much better!

Author:

jaydotjay

Posted:

Sep 28, 2019 08:24

Subject:

Thumbnail Size

Viewed:

70 times

Topic:

Status:

Open

Vote:

[Yes|No]

Is it possible to customize or change the thumbnail size when searching in the
catalog? I'm not sure if it's a setting I missed, but it would be useful
to when you're overlooking an entire line to find something specific.

Author:

GregSwiss

Posted:

Sep 25, 2019 07:43

Subject:

Re: Sort by in Wanted List

Viewed:

50 times

Topic:

In Suggestions, Brickwilbo writes:

In Suggestions, iprice writes:

In Suggestions, Brickwilbo writes:

In Suggestions, iprice writes:

In Suggestions, Brickwilbo writes:

In Suggestions, GregSwiss writes:

Hello

Would it be possible to implement a new sort by-option in the Wanted List?
What I would like to see is "Missing" what would be the difference between "Wanted"
and "Have".

Cheers
Greg

The current Have feature is useless. It's the same as Want.
Easier is to create an Ordered Wantlist and move the items there until they're
received.

I actually find the "Have" feature to be very useful, though I would like an
"Ordeded/Purchased" feature too; I've purchased loads of parts multiple times
accidentally, as I'd forgotten I had already ordered them and didn't
check through my current orders properly. If I could mark wanted parts as "Ordered"
it would save me time. money and storage space.

That's exactly what the Have feature was supposed to do, but it doesn't
subtract anything from Want.

It does though. If you look in your Wanted list it clearly shows how many you
Want and how many you Have in hand. Now go to a store and select Wanted List
it shows sjhows your Wanted Qty (which is original Wanted minus Have).

As for Have - I don't want it

I just checked and it still doesn't subtract Have from original Want.
Usually I don't want to search for the original Want quantity but for new
Want quantity.

But I can not sort the list in that way that it shows all my incomplete lots
within a wanted list.

Author:

Teup

Posted:

Sep 24, 2019 19:10

Subject:

Re: Search setting: seller location filter

Viewed:

45 times

Topic:

In Suggestions, Nowaker writes:

You might be blocking out a huge part of Bricklink that could have just what you are looking for.

I value predictable shipping prices and fast delivery. I don't know what
to expect when ordering from other countries.

Go for the sellers with Instant Checkout. This is indicated by a lightning bolt
icon behind the store name. All added charges will be calculated realtime so
at checkout you see exactly what you will pay.

Normal sized orders from the NL to the US typically take 4 days to arrive. From
other countries it may be a bit longer, but anyway, a couple of days faster shipping
may not always outweigh the price difference.

Author:

Brickwilbo

Posted:

Sep 24, 2019 05:13

Subject:

Re: Sort by in Wanted List

Viewed:

36 times

Topic:

In Suggestions, iprice writes:

In Suggestions, Brickwilbo writes:

In Suggestions, iprice writes:

In Suggestions, Brickwilbo writes:

In Suggestions, GregSwiss writes:

Hello

Would it be possible to implement a new sort by-option in the Wanted List?
What I would like to see is "Missing" what would be the difference between "Wanted"
and "Have".

Cheers
Greg

The current Have feature is useless. It's the same as Want.
Easier is to create an Ordered Wantlist and move the items there until they're
received.

That's exactly what the Have feature was supposed to do, but it doesn't
subtract anything from Want.

I just checked and it still doesn't subtract Have from original Want.
Usually I don't want to search for the original Want quantity but for new
Want quantity.

Author:

Brickwilbo

Posted:

Sep 24, 2019 04:51

Subject:

Re: Sort by in Wanted List

Viewed:

31 times

Topic:

In Suggestions, iprice writes:

In Suggestions, Brickwilbo writes:

In Suggestions, iprice writes:

In Suggestions, Brickwilbo writes:

In Suggestions, GregSwiss writes:

Hello

Would it be possible to implement a new sort by-option in the Wanted List?
What I would like to see is "Missing" what would be the difference between "Wanted"
and "Have".

Cheers
Greg

The current Have feature is useless. It's the same as Want.
Easier is to create an Ordered Wantlist and move the items there until they're
received.

That's exactly what the Have feature was supposed to do, but it doesn't
subtract anything from Want.

If it does now, the Have feature probably has been tweeked.

Author:

iprice

Posted:

Sep 24, 2019 03:46

Subject:

Re: Sort by in Wanted List

Viewed:

28 times

Topic:

In Suggestions, Brickwilbo writes:

In Suggestions, iprice writes:

In Suggestions, Brickwilbo writes:

In Suggestions, GregSwiss writes:

Hello

Would it be possible to implement a new sort by-option in the Wanted List?
What I would like to see is "Missing" what would be the difference between "Wanted"
and "Have".

Cheers
Greg

The current Have feature is useless. It's the same as Want.
Easier is to create an Ordered Wantlist and move the items there until they're
received.

That's exactly what the Have feature was supposed to do, but it doesn't
subtract anything from Want.

Author:

Brickwilbo

Posted:

Sep 23, 2019 13:06

Subject:

Re: Sort by in Wanted List

Viewed:

36 times

Topic:

In Suggestions, iprice writes:

In Suggestions, Brickwilbo writes:

In Suggestions, GregSwiss writes:

Hello

Would it be possible to implement a new sort by-option in the Wanted List?
What I would like to see is "Missing" what would be the difference between "Wanted"
and "Have".

Cheers
Greg

The current Have feature is useless. It's the same as Want.
Easier is to create an Ordered Wantlist and move the items there until they're
received.

That's exactly what the Have feature was supposed to do, but it doesn't
subtract anything from Want.

Author:

iprice

Posted:

Sep 23, 2019 12:58

Subject:

Re: Sort by in Wanted List

Viewed:

35 times

Topic:

In Suggestions, Brickwilbo writes:

In Suggestions, GregSwiss writes:

Hello

Would it be possible to implement a new sort by-option in the Wanted List?
What I would like to see is "Missing" what would be the difference between "Wanted"
and "Have".

Cheers
Greg

The current Have feature is useless. It's the same as Want.
Easier is to create an Ordered Wantlist and move the items there until they're
received.

Author:

Brickwilbo

Posted:

Sep 23, 2019 07:24

Subject:

Re: Sort by in Wanted List

Viewed:

35 times

Topic:

In Suggestions, GregSwiss writes:

Hello

Would it be possible to implement a new sort by-option in the Wanted List?
What I would like to see is "Missing" what would be the difference between "Wanted"
and "Have".

Cheers
Greg

The current Have feature is useless. It's the same as Want.
Easier is to create an Ordered Wantlist and move the items there until they're
received.

Author:

GregSwiss

Posted:

Sep 23, 2019 06:47

Subject:

Sort by in Wanted List

Viewed:

55 times

Topic:

Status:

Open

Vote:

[Yes|No]

Hello

Would it be possible to implement a new sort by-option in the Wanted List?
What I would like to see is "Missing" what would be the difference between "Wanted"
and "Have".

Cheers
Greg

Author:

Nowaker

Posted:

Sep 23, 2019 00:12

Subject:

Re: Search setting: seller location filter

Viewed:

37 times

Topic:

You might be blocking out a huge part of Bricklink that could have just what you are looking for.

I value predictable shipping prices and fast delivery. I don't know what
to expect when ordering from other countries. This is the biggest problem:

Seller will calculate S&H fees and send and invoice with the final price for the order.

Items will be reserved for you, and you will be obligated to purchase them.

There's no way I'm agreeing to pay an unknown amount of S&H when I don't
know what S&H actually is. I also don't want to send custom messages to sellers
and ask for pricing.

I don't want a hands-on experience in buying. I want an Amazon-like experience
where I know exactly how much and when I'm receiving my order. For this reason,
I always want to see US sellers only.

Author:

Bitsnpieces....

Posted:

Sep 22, 2019 01:40

Subject:

Quote System/Cart to be like a Store Cart

Viewed:

90 times

Topic:

Status:

Open

Vote:

[Yes|No]

Quote system/Cart

Can we get the quote system/cart to be the same as the store cart?

As we all know with the Store cart when an item gets sold or the quantity differs
than you put in your cart, you can adjust the items in your store cart, or delete,
and your store cart is still active, and can remain active until you go through
with the order or empty it completely.

Can we get the quote system/cart to be like the store as well?

Rather than just losing everything in the quote cart when its gets cancelled
by whatever reason, and having to start all over again?

Rob

Author:

hpoort

Posted:

Sep 20, 2019 13:53

Subject:

Re: Layout

Viewed:

59 times

Topic:

In Suggestions, ihave36paws writes:

How can you change the Classic Layout. If you are going to make changes to things
it would be the new Layout.

We hate the way they removed the (My Order Note) line from under the order.

Now you have to travel way over to the right to see it, unless you have your
screen so small that you can't read it.

Please change it back.

At [My BL] [Settings] [My Order Settings] you can select how to show your order
notes: as icons, on the right or below each line.

Author:

calsbricks

Posted:

Sep 20, 2019 12:54

Subject:

Re: Layout

Viewed:

35 times

Topic:

In Suggestions, ihave36paws writes:

You can do that yourself here;

That is at the top of your ofrder detail page. Is that what you meant?

Author:

ihave36paws

Posted:

Sep 20, 2019 12:49

Subject:

Layout

Viewed:

110 times

Topic:

Status:

Open

Vote:

[Yes|No]

Author:

Adjour

Posted:

Sep 18, 2019 11:45

Subject:

Re: Request a Quote

Viewed:

78 times

Topic:

In Suggestions, Hurt writes:

In Suggestions, Adjour writes:

(Except that one dude in Korea that keeps asking for quotes and then cancelling,
we are on three now I think lol)

Haha

May I suggest to also add gram (beside ounce) to your shipping table for international
shipment. Makes it easier if you don't need to use google to get an overview
of the weights

Hahaha, that is a good suggestion. I forget that not everyone uses "freedom units"

Funny I've never thought of that because I've often had the same frustration
when buying from European sellers, but in reverse.

Author:

Hurt

Posted:

Sep 18, 2019 10:31

Subject:

Re: Request a Quote

Viewed:

44 times

Topic:

In Suggestions, Adjour writes:

(Except that one dude in Korea that keeps asking for quotes and then cancelling,
we are on three now I think lol)

Haha

May I suggest to also add gram (beside ounce) to your shipping table for international
shipment. Makes it easier if you don't need to use google to get an overview
of the weights

Author:

Adjour

Posted:

Sep 18, 2019 10:11

Subject:

Re: Request a Quote

Viewed:

56 times

Topic:

In Suggestions, kelmgo writes:

I am after a few pieces to complete a few kits and am going from one checkout
to another, then to another and then cancelling the orders (before payment) because
the vendors haven't got the "Request a Quote" provision set up.
Clearly it would save a lot of stuffing around if you know the full cost incl
P&H before hand.
Even better - there should be a little icon or something next to the vendors
name to indicate whether they send quotes or not so you don't have to go
through the checkouts to find out right at the end.
This is what I'm experiencing in Australia

I like this idea.

My store allows for quotes and very few people use it. (Except that one dude
in Korea that keeps asking for quotes and then cancelling, we are on three now
I think lol)

I do get lots of messages from buyers asking for quotes even though I have some
pretty direct shipping tables. So it's obvious they haven't even made
a cart yet.

So all in all I think the quote system is underused or misunderstood by buyers.

Author:

yorbrick

Posted:

Sep 18, 2019 04:22

Subject:

Re: Request a Quote

Viewed:

40 times

Topic:

In Suggestions, Brickwilbo writes:

In Suggestions, kelmgo writes:

You can always use the Contact Store button and inquire about the shipping costs.

That doesn't necessarily work. There are light but high volume parts (like
some windscreens), so if you tell the seller the weight it can be misleading.

Then there are the sellers that have a shipping table based on weight, but refuse
to allow buyers to see the weight of a cart.

I'd like to see a "allows quotes" icon, or better still force all sellers
to allow quotes (better) or order cancellations (worse).

Author:

Teup

Posted:

Sep 17, 2019 13:18

Subject:

Re: Request a Quote

Viewed:

51 times

Topic:

In Suggestions, MidwestBrick writes:

In Suggestions, Teup writes:

In Suggestions, kelmgo writes:

Part of what you suggest exists: Stores with a thunderbolt icon have instant
checkout, which means that you see the grand total before you order. There isn't
an icon to distinguish quote sellers from non-quote sellers, however. But even
if there would be such an icon, I'm not sure it would do sellers justice,
as a non quote seller may have a very clear table of shipping costs, which could
be just as good or better than asking a quote.

I disagree and think it is a valid request to include an icon so shoppers know
they can get a quote from that store immediately instead of having to look for
it or go through the check-out phase.

Using IC is impossible to hit on every scenario and even sometimes the IC may
work, but a buyer still wants to use the Quote system because maybe the IC is
charging too much. There is nothing wrong with a buyer double-checking to see
if their order actually fits in a cheaper shipping option than what IC is calculating.

Those are problems of IC.. but a relevant point because it makes the thunderbolt
misleading. Maybe the system should be made such that if an order doesn't
qualify for IC, the seller by definition has to quote.
My IC works properly: It works on every order and the calculations are correct.
It is always possible to make IC work (if nothing else, you could even charge
1 rate for all orders, after all). But I agree it is not always desirable, for
those sellers who have very significant and unpredictable shipping charge fluctuations
because of a complicated postal service. I expect most of them will have no obligations
against quoting, so an obligatory quote alternative should be ok.. that way,
the thunderbolt is not misleading.

Author:

MidwestBrick

Posted:

Sep 17, 2019 12:58

Subject:

Re: Request a Quote

Viewed:

48 times

Topic:

In Suggestions, Teup writes:

In Suggestions, kelmgo writes:

Author:

Brickwilbo

Posted:

Sep 17, 2019 12:50

Subject:

Re: Request a Quote

Viewed:

43 times

Topic:

In Suggestions, kelmgo writes:

You can always use the Contact Store button and inquire about the shipping costs.

Clearly it would save a lot of stuffing around if you know the full cost incl
P&H before hand.
Even better - there should be a little icon or something next to the vendors
name to indicate whether they send quotes or not so you don't have to go
through the checkouts to find out right at the end.
This is what I'm experiencing in Australia

Author:

Teup

Posted:

Sep 17, 2019 12:38

Subject:

Re: Request a Quote

Viewed:

43 times

Topic:

In Suggestions, kelmgo writes:

Author:

kelmgo

Posted:

Sep 17, 2019 12:33

Subject:

Request a Quote

Viewed:

124 times

Topic:

Status:

Open

Vote:

[Yes|No]

Author:

Teup

Posted:

Sep 15, 2019 14:24

Subject:

Re: Search setting: seller location filter

Viewed:

57 times

Topic:

In Suggestions, Nowaker writes:

I'm interested to see offers from United States only.

Each time I'm on a hunt for something, I have to open the filtering options
and select selector location United States.

Please make it possible to set a default filter for all searches. It should be
available here: https://www.bricklink.com/searchSettings.asp?viewFrom=P

This will improve the shopping experience immensely.

Thank you.
-Nowaker

If it would make that much difference, it sounds like you are constantly searching
US only. While I get that it is useful to filter on your own country some of
the time, are you sure that you never want to order something from sellers
in other countries? From what I understood US shipping is expensive, there are
no import duties (correct me if I'm wrong), you don't have to pay VAT,
so ordering abroad can get you some pretty good deals. You might be blocking
out a huge part of Bricklink that could have just what you are looking for.

Author:

calsbricks

Posted:

Sep 15, 2019 10:19

Subject:

Re: Search setting: seller location filter

Viewed:

32 times

Topic: