BrickLink Discussion Forum

Sourcing suitable Lego at a good price here is not easy either, nearly everyone
expects a high price, can’t blame them but it makes it difficult if you want
to resell.

In Announce, Teup writes:

In Announce, runner.caller writes:

In Announce, Teup writes:
Money = time = space. If you want to earn more money, you need either more time
or more space. You can work long hours at a low profit rate, or you can crank
up your profit rate by growing your store which enables higher prices. My strategy
has always been to go nuts on space and save time

You bring up a good point about time.

I'd say the best % return on paper would be from cheap used bulk with figs
and listing every possible piece.

I recently acquired 60lbs for $330 that included approx. 125 figures.

Now, if I were to take the time to list EVERYTHING I could, the unrealized gains
would be huge. A couple thousand dollars maybe, but it would take me a super
long time to list and even longer to realize those gains + I don't have the
space to do all the parts.

I already flipped one architecture set to ebay out of that lot weighing around
2 lbs for approx $80 after fees and shipping. I'll do this with all the bulk
from this lot eventually and probably 2X to 3X on just that as an immediate realized
gain and this will leave the 125 figures as "free" that I will then add to my
BL store.

The % gains are not there, but I can process way more lots if I sell off the
bulk in 2 or 3 listings and then add 100 or so figures to my store vs taking
the time so sort, store, list, pick, pack, and ship 24,000 pieces over the long
run.

Just different strategy, I also know a lot of sellers that do very well with
parts and having a huge variety.

Ah, that makes sense, I was talking strictly about parting out new sets. Those
will usually be 2x or 3x almost by definition, as I think that roughly gets
you an hourly pay of something in between €15-€25 which is an acceptable "career"
for people. If we'd have sources all over the place that give us 5x, pretty
soon the prices will just drop until we settle at the 2x-3x level again.

But as for used, yes, a whole lot more work is involved there, so it makes sense
that you can have 5x there - and probably still end up with that same hourly
pay as you would for parting out a new set at 2x (with the benefit of course
that you have much more cool and unique things to draw customers with).

I think it depends on where you live whether you can source used stock at an
acceptable price, though. Here it's pretty hard. I get the impression that
in America it's common for people to not really be aware of what they have
and just dump it for cheap, while in the Netherlands everyone thinks they're
suddenly an expert or somehow have hidden gems in their attic that the world
was waiting for, even though they don't know anything about Lego. The same
way all Americans know "don't eat yellow snow", all Dutch people know "don't
sell your Lego cheap"

Author:

Teup

Posted:

Jan 19, 2022 06:08

Subject:

Re: Typical profit margins

Viewed:

99 times

Topic:

In Announce, runner.caller writes:

Author:

StickyBrickit

Posted:

Jan 19, 2022 04:53

Subject:

Re: Typical profit margins

Viewed:

116 times

Topic:

In Announce, runner.caller writes:

Some good points about time management. I think this is key with reselling Lego...max.
gains could be seen by parting out every piece and listing individually but to
run this as a full-time business and your sole income would take an enormous
amount of time to build up the stock levels (acquiring, sorting, checking, storing
and listing) so your hourly rate would be very poor, especially to start with.

Probably best thought of as what's the best hourly rate method that can be
achieved in a reasonable amount of time? Say 1-2 years to have a working store
with a livable wage. I don't think individual parts would get you there that
quick.

Author:

Sadler_Bricks

Posted:

Jan 19, 2022 00:36

Subject:

Re: 10k bricks milestone

Viewed:

36 times

Topic:

Congrats

Sadler_bricks

Author:

Oliverbricks

Posted:

Jan 18, 2022 17:19

Subject:

10k bricks milestone

Viewed:

76 times

Topic:

Hello everyone my store just hit 10,000 bricks please stop by my store and check
it out

Author:

yorbrick

Posted:

Jan 18, 2022 15:39

Subject:

Re: Typical profit margins

Viewed:

114 times

Topic:

I don't find new sets vs used sets to have too too much difference in part
out time though.

It depends if the used set is already checked for completeness and everything
is genuine. If that is already done, then part out times are similar. Unless
there are stickered parts that you want to sell as decorated, that's a bit
more work.

Author:

Brickitty

Posted:

Jan 18, 2022 14:56

Subject:

Re: Typical profit margins

Viewed:

111 times

Topic:

In Announce, Adjour writes:

as a side note, I've always liked your store. It's the size I hope to
reach. I think we have similar strategies on many things based on other posts.

It is so interesting to me that so many different strategies can work here for
the same product...and how the level of service can then change that as well!

Crystal

Thank you so much, Crystal! I like your store too, and since I see you have a
handful of things on my wanted list, expect an order from me later today! (Not
because you complimented me... but not NOT because you complimented me.)

As another side note, collecting every Lego animal is a big job. I'm still
mad about those random-animal-color Friends cubes they've been releasing
for a few years now.

Author:

Adjour

Posted:

Jan 18, 2022 14:42

Subject:

Re: Typical profit margins

Viewed:

112 times

Topic:

Author:

Brickitty

Posted:

Jan 18, 2022 14:30

Subject:

Re: Typical profit margins

Viewed:

119 times

Topic:

In Announce, Adjour writes:

if you are topping out making 2x markup doing this IMO you are doing something
wrong. .02

I frequently make 10-20x my investment sometimes more. I'd say 4-5x is probably
more the norm. HOWEVER, that does not account for time.

Time is what kills your margins.

Also keep in mind the capital tied up. I spent years buying any inventory that
had the right price. I'm currently coasting on stuff already bought. I'm
just listing now. If you don't have the operating capital to buy stuff at
the right time, and the ability wait for those items to sell, then you make less
money.

I'm probably making about what I did at my old day job before I quit to do
this full time (on this site, if I want quick capital for something I use local
and ebay). but, just like time is your enemy, its also now my friend. I get to
work when I want now.

The flexibility alone make it worth it.

Crystal

+1 to just about everything. If I had gone into the field I majored in over a
decade ago, I still wouldn't be making as much as I do with Lego, even after
the high self-employed tax rate in the U.S. (I was not pre-med nor engineering).

Know your worth. Don't sell yourself short (in this case, the idiom is literal).
My biggest strength is that I make virtually zero mistakes on orders, ever, and
that's worth a lot in this business. It took me years to realize that, though.

Author:

Adjour

Posted:

Jan 18, 2022 14:17

Subject:

Re: Typical profit margins

Viewed:

100 times

Topic:

In Announce, yorbrick writes:

A big difference here is new vs used. New sets, whether sold as part outs or
sets, don't have the profit margins that used ones do but then they do not
require the time used sets or parts do either.

Agreed.

After I posted I realized I should specify. Used is def a different ballgame.

That said, I still do better than 2x on new stuff.

I don't find new sets vs used sets to have too too much difference in part
out time though.

To each their own. I just know, for me, personally, if I was doing only new,
for only 2x, it would not be worth it.

Author:

yorbrick

Posted:

Jan 18, 2022 14:04

Subject:

Re: Typical profit margins

Viewed:

112 times

Topic:

A big difference here is new vs used. New sets, whether sold as part outs or
sets, don't have the profit margins that used ones do but then they do not
require the time used sets or parts do either.

Author:

Adjour

Posted:

Jan 18, 2022 13:30

Subject:

Re: Typical profit margins

Viewed:

146 times

Topic:

In Announce, StickyBrickit writes:

Just wondering what sort of % profit margins people generally make, if they know?
I don't know the exact number but I usually try to buy parts at a price that
allows me to sell them for at least double what I paid. This allows me to make
about 30% on the parts, once fees, shipping etc is taking into account. I sell
on eBay as well so the fees there are a much bigger % of the sale than they are
on Bricklink.

I've heard of people regularly making x3, x4, x5 their money back but I have
no idea where they are sourcing parts if they are making this level of profit.
Other than the occasional "unicorn" find (rare figures in a cheap bulk lot for
instance) I struggle to make double my money. Just wondering what the general
rate of return is for other sellers?

Author:

runner.caller

Posted:

Jan 18, 2022 11:16

Subject:

Re: Typical profit margins

Viewed:

125 times

Topic:

Author:

Teup

Posted:

Jan 18, 2022 05:19

Subject:

Re: Typical profit margins

Viewed:

158 times

Topic:

In Announce, StickyBrickit writes:

I think the unwritten rule many sellers have in their heads is that x2 = OK.
x3 is great, x4 is exceptional and x5 is fishermen's talk. Well, I heard
that in America there can be some crazy discounts of 50% or even more, but
I doubt there are sellers who manage to make a robust steady x5 on the majority
of their inventory. If I had that, I would need to work only a few hours a week

And it would mean everyone would dive into the business, and bring down the
price. I think eventually things always gravitate towards something between x2
and x3, since that's the level that generates an acceptable pay per hour.

By the way what you describe is not x2 but less, since you have included postage/fees/taxes.
Sometimes smaller stores need to settle for 1.5x in order to beat the competition.
Bigger stores will draw customers anyway and can afford to be more expensive.
I started out with x2, now I'm near x3.

Money = time = space. If you want to earn more money, you need either more time
or more space. You can work long hours at a low profit rate, or you can crank
up your profit rate by growing your store which enables higher prices. My strategy
has always been to go nuts on space and save time

Author:

yorbrick

Posted:

Jan 18, 2022 04:52

Subject:

Re: Typical profit margins

Viewed:

127 times

Topic:

I sell
on eBay as well so the fees there are a much bigger % of the sale than they are
on Bricklink.

That depends on when / how you sell. If you are a private rather than a registered
business seller, they regularly do 70% off the percentage fees. If you list then,
you pay about 3.6% plus the fixed 30p and that includes the payment fees. Compare
that to the 3% charged at bricklink plus the extra ~4% and 30p for PayPal, and
eBay fees turn out somewhat lower.

Author:

StickyBrickit

Posted:

Jan 18, 2022 04:38

Subject:

Typical profit margins

Viewed:

387 times

Topic:

Author:

peregrinator

Posted:

Jan 16, 2022 13:48

Subject:

Re: AVAILABE: 2 x 76202 and 2 x 76204 RECALLED

Viewed:

69 times

Topic:

In Announce, psusaxman2000 writes:

I'm pretty sure you still need to have these as a custom listing on your
store to sell them here. You can't just sell directly through the forum.

I don't think they can be sold here at all.

Author:

WapiBricksLLC

Posted:

Jan 16, 2022 12:57

Subject:

Weekend sale ends tonight! Everything on sale

Viewed:

54 times

Topic:

Everything in my store is 10% off until Sunday at midnight!

Check it out while you still can!

I have over 140,000 items in almost 7,000 lots. AKA there is something for everyone.

Zach

Author:

psusaxman2000

Posted:

Jan 16, 2022 11:12

Subject:

Re: AVAILABE: 2 x 76202 and 2 x 76204 RECALLED

Viewed:

83 times

Topic:

I'm pretty sure you still need to have these as a custom listing on your
store to sell them here. You can't just sell directly through the forum.

Author:

Brickdude101

Posted:

Jan 15, 2022 12:27

Subject:

ENTIRE STORE ON SALE!! 5 % OFF EVERYTHING ,

Viewed:

32 times

Topic:

Old sets, New sets, Retired Sets, Everything

Author:

Paul_Dreuning

Posted:

Jan 15, 2022 05:36

Subject:

Reached 20 000 items.

Viewed:

71 times

Topic:

Hello every one,

This week i hit 20k parts. Everything in my store is 10% off.

If you have tips for my store, please let me know.

Sincerely,
Paul Dreuning.

Author:

Oliverbricks

Posted:

Jan 14, 2022 16:17

Subject:

New store

Viewed:

93 times

Topic:

Hello everyone please come check out my store I am a new seller. If you have
any tips for me please let me know and If you are interested in supporting me
that would be great.

Thanks,
Oliver

Author:

zorbanj

Posted:

Jan 12, 2022 22:43

Subject:

Re: What Would You Do Different?

Viewed:

45 times

Topic:

In Announce, Adjour writes:

Opportunity cost IS a thing. So even though you make more on selling the parted
out set, it takes YEARS to do so. A set sells in hours to days (if not here,
then other platforms). Having the money now vs later has value, even if its less.

There is also the opportunity cost of putting all the pieces away, picking them
for orders and shipping out the orders themselves. Once the set is together it
takes 5 minutes to pack and run the label.

THAT SAID I almost never order parts. If I don't have the parts on hand
I usually just part it out or sell it incomplete. Depends.

I see what the set is selling for on BL and elsewhere. Sometimes it's worth
ordering the parts to complete it. A set does not need to be complete to sell.
It takes longer, but every set I have listed as incomplete eventually sells.

I def do not make
long wanted lists and buy parts to complete sets. If I'm ordering for myself
and I can complete a for sale set from the same vendor,

I make wanted lists of the missing pieces. I run the wanted lists against my
inventory after listing a bunch of pieces to see if there are any matches.

Author:

Adjour

Posted:

Jan 12, 2022 21:14

Subject:

Re: Minifig Heads Blocked Open Vs Hollow

Viewed:

29 times

Topic:

hahah

touché

Author:

Adjour

Posted:

Jan 12, 2022 21:12

Subject:

Re: What Would You Do Different?

Viewed:

43 times

Topic:

Selling sets is how I got rolling. I love buying bulk and putting sets back together.

Opportunity cost IS a thing. So even though you make more on selling the parted
out set, it takes YEARS to do so. A set sells in hours to days (if not here,
then other platforms). Having the money now vs later has value, even if its less.

I was putting sets back together anyway. I do this as a hobby too, so if I'm
keeping 80% of my buy for myself, its really not that much effort to slap the
other 20% together for sale to cover my costs.

THAT SAID I almost never order parts. If I don't have the parts on hand
I usually just part it out or sell it incomplete. Depends. I def do not make
long wanted lists and buy parts to complete sets. If I'm ordering for myself
and I can complete a for sale set from the same vendor, I might do it.

The only thing I'd really do different is as another poster mentioned, use
sliders on my ziplocks. Holy heck its such a difference.

Author:

peregrinator

Posted:

Jan 12, 2022 21:12

Subject:

Re: Minifig Heads Blocked Open Vs Hollow

Viewed:

24 times

Topic:

In Announce, Adjour writes:

In Announce, ChickswithBrix writes:

I've been listing used minifig heads and there seems to be inconsistency
on these 2 varieties. Is there a consensus on which is which? I assume the hollow
studs are the ones with the little x inside but you can still see through.

Blocked open is the "x" ones

Not to be a pedant but I think it's a Y - there are three arms instead of
four.

There are also a few "vented" studs around - that's just a single bar across.
Here's an example:

28621pb0011 Minifigure, Head Alien Ghost with Yellowish Green Face, Slime Mouth and Flames in Back Pattern - Vented Stud
Parts: Minifigure, Head

Author:

Adjour

Posted:

Jan 12, 2022 21:03

Subject:

Re: Minifig Heads Blocked Open Vs Hollow

Viewed:

23 times

Topic:

In Announce, ChickswithBrix writes:

Blocked open is the "x" ones

Hollow studs are solid inside, but hollow, as opposed to "solid stud"

Author:

ChickswithBrix

Posted:

Jan 12, 2022 20:59

Subject:

Minifig Heads Blocked Open Vs Hollow

Viewed:

68 times

Topic:

Author:

kzinti

Posted:

Jan 12, 2022 18:17

Subject:

Re: What Would You Do Different?

Viewed:

58 times

Topic:

In Announce, StickyBrickit writes:

Just a thought experiment for those of you who run a store. If you could go back
in time to when you started selling Lego, what's the one thing you'd
do differently?

For me it would be not buying mixed-up bulk sets to rebuild and sell as used
complete sets. I didn't realise just HOW MUCH TIME it takes to check each
part, find / order replacements, list, store, package and post each one. Return
on investment for most sets is so poor if they come in mixed-up bulk lots that
even if the Lego was given to me for FREE I still don't think it would be
worth the time in most cases (unless the sets are rare / expensive!). Deffo not
worth it for City sets and similar though...

I'd have invested $50k in bulk brick purchases (instead of only $3k) from
the guy I met who had the scrap contract with the Mexican Lego manufacturing
facility. That stuff was pounds and pounds of great bulk parts, with thousands
of the same parts, but almost all of it worth big money. Remember the rare LBG
6.6L bars and 1x1 DBG cones without ridge from the 10179 sets? I had thousands
of them!

Author:

Brick_Qc

Posted:

Jan 12, 2022 17:43

Subject:

Re: What Would You Do Different?

Viewed:

39 times

Topic:

In Announce, StickyBrickit writes:

Funny personnal story on BL.

12-14 years ago, I got lucky, I got a surprise in a collection I bought. A boxed
106-1 Unicef set in great condition. I was ecstatic, I knew it was worth a lot
of money, but there just wasn't any info on the price guide then, nothing.
I told myself, I'll ask a ridiculous price and lower it as the months go
by...no hurry.

So I priced it at 1200 USD...and yes, 7 minutes later, you guest it...it was
sold...

My bad...

Author:

Ziegelmeister

Posted:

Jan 12, 2022 16:37

Subject:

Re: What Would You Do Different?

Viewed:

44 times

Topic:

In Announce, SylvainLS writes:

In Announce, peregrinator writes:

In Announce, SylvainLS writes:

less than

fewer than

The symbol (which caused the sentence to be truncated) is called “less-than.”

https://en.wikipedia.org/wiki/Less-than_sign

(And the rule is controversial.)

Oh whoopsie. Thanks for fixing that.

Author:

Brickitty

Posted:

Jan 12, 2022 15:57

Subject:

Re: What Would You Do Different?

Viewed:

51 times

Topic:

In Announce, jennnifer writes:

In Announce, StickyBrickit writes:

For me it would be not buying mixed-up bulk sets to rebuild and sell as used
complete sets.

Funny...I like buying mixed-up bulk sets and selling them by the part no matter
what fancy set was in there. I do feel a bit guilty sometimes breaking up the
remnants of an older set. I even break up the minifigs.

I have enjoyed every aspect of running my shop except how ridiculous the cost
of postage has become. When I started a domestic order shipped for $1.75, $3
for international. Today, I invoiced a buyer in Germany for $15.36 in postage.
Sigh. So, I guess what I would do differently is start sooner than I did.

Jen

I mean, don't you know that the United States Postal Service should be profitable?
Unlike... let's see... virtually every other federal institution?

*heavy sarcasm* in case that wasn't obvious.

Author:

SylvainLS

Posted:

Jan 12, 2022 15:50

Subject:

Re: What Would You Do Different?

Viewed:

43 times

Topic:

In Announce, peregrinator writes:

In Announce, SylvainLS writes:

less than

fewer than

The symbol (which caused the sentence to be truncated) is called “less-than.”

https://en.wikipedia.org/wiki/Less-than_sign

(And the rule is controversial.)

Author:

1001bricks

Posted:

Jan 12, 2022 15:48

Subject:

Re: What Would You Do Different?

Viewed:

45 times

Topic:

In Announce, peregrinator writes:

In Announce, SylvainLS writes:

less than

fewer than

It's my lessest concern.

Author:

Brickitty

Posted:

Jan 12, 2022 15:47

Subject:

Re: What Would You Do Different?

Viewed:

49 times

Topic:

In Announce, SezaR writes:

3. Used freezer bags with sliders instead of regular ziplocs. I've probably
wasted hours of my life and millions of skin cells from my fingertips by opening
and closing regular ziplocs.

What are they? do you have a link from where you buy them? Thanks

Storage bags like this: https://smile.amazon.com/Hefty-Slider-Plastic-Storage-Quart/dp/B01JLPJKVO/ref=sxts_rp_s1_0

They're usually available at box stores and grocery stores, but they're
usually more expensive than regular storage bags. (Sorry, I always forget that
"Ziploc" is a brand name -- I think of it as the product, kind of like Kleenex
/ "tissue paper" or Crock-Pot / "slow-cooker".)

Author:

peregrinator

Posted:

Jan 12, 2022 15:39

Subject:

Re: What Would You Do Different?

Viewed:

46 times

Topic:

In Announce, SylvainLS writes:

less than

fewer than

Author:

jennnifer

Posted:

Jan 12, 2022 15:21

Subject:

Re: What Would You Do Different?

Viewed:

49 times

Topic:

In Announce, SezaR writes:

3. Used freezer bags with sliders instead of regular ziplocs. I've probably
wasted hours of my life and millions of skin cells from my fingertips by opening
and closing regular ziplocs.

What are they? do you have a link from where you buy them? Thanks

I think he means the ordinary sandwich and freezer bags you buy at the grocery
store.

Jen

Author:

SylvainLS

Posted:

Jan 12, 2022 15:19

Subject:

Re: What Would You Do Different?

Viewed:

45 times

Topic:

In Announce, SezaR writes:

3. Used freezer bags with sliders instead of regular ziplocs. I've probably
wasted hours of my life and millions of skin cells from my fingertips by opening
and closing regular ziplocs.

What are they? do you have a link from where you buy them? Thanks

Ziploc (which, apparently, is a brand) does them: just search for “ziploc slider.”

And if you want another brand, search for “ziplock slider.”

Author:

SezaR

Posted:

Jan 12, 2022 15:10

Subject:

Re: What Would You Do Different?

Viewed:

53 times

Topic:

3. Used freezer bags with sliders instead of regular ziplocs. I've probably
wasted hours of my life and millions of skin cells from my fingertips by opening
and closing regular ziplocs.

What are they? do you have a link from where you buy them? Thanks

Author:

jennnifer

Posted:

Jan 12, 2022 14:48

Subject:

Re: What Would You Do Different?

Viewed:

61 times

Topic:

In Announce, StickyBrickit writes:

For me it would be not buying mixed-up bulk sets to rebuild and sell as used
complete sets.

Jen

Author:

Brickitty

Posted:

Jan 12, 2022 14:30

Subject:

Re: What Would You Do Different?

Viewed:

60 times

Topic:

In Announce, StickyBrickit writes:

That's funny, because that process of buying bulk, buying missing parts,
and selling complete sets was the only way I was able to build up my backstock
of parts, build up my personal collection, and keep my partner happy by staying
in the black financially. Without doing that for 6 years and thousands of sets,
I never could've launched my huge store last year. I always made at least
a 300% profit on every bulk lot I bought, even after purchasing missing parts.
So while that didn't work for you, it's the only reason this Lego thing
worked for me. Granted, I was privileged to have a partner with a "normal" job
that supported us the whole time and believed my long-term plan would eventually
pay off... as it has.

Anyway, what would I do differently?

1. NOT SELL EMPTY BOXES. They don't work well with Instant Checkout, they're
not worth enough to justify the time spent finding shipping boxes and packaging
them up, box buyers are some of the most fickle and frustrating buyers (most
of my cancelled orders are empty-box orders), and they're difficult to store.
But I feel like I'm committed to getting rid of my stock at this point. Sunk-cost
fallacy, I know.

2. Price higher. For years I sold sets at fairly low prices to make quick sales
on auction sites, Bricklink, Craigslist, etc. I should've priced higher and
had more patience.

3. Used freezer bags with sliders instead of regular ziplocs. I've probably
wasted hours of my life and millions of skin cells from my fingertips by opening
and closing regular ziplocs.

4. Probably should've bought that Cloud City Boba Fett for $150 about 6 years
ago.

Author:

SylvainLS

Posted:

Jan 12, 2022 13:47

Subject:

Re: What Would You Do Different?

Viewed:

65 times

Topic:

In Announce, Yellow.Brick writes:

In Announce, StickyBrickit writes:

less than

300 pieces or have 1-4 bags, but I
unfortunately did this with a few City Gardens and Hogwarts Castles which are
~6000 pieces... And of course everyone wanted the few rare pieces that come
in those sets. I sold a lot of parts but the time it took to skim through the
instruction books to find part to find the bag was a pain in the butt. Then
there was the issue with having multiple open bags in the box dropping pieces
which slowed down the parting out process.

Not doing that again.

Author:

Ziegelmeister

Posted:

Jan 12, 2022 13:34

Subject:

Re: What Would You Do Different?

Viewed:

68 times

Topic:

In Announce, StickyBrickit writes:

Probably the single dumbest thing I did comes with a caveat.

Once things started taking off with my own personal leftover new pieces, I spent
a couple grand buying new inventory to part out and adding as I went. I saw
things scaling up with larger orders so I went ahead listed EVERYTHING despite
having 24 sets that still needed parted out.

It actually works okay for sets that are
unfortunately did this with a few City Gardens and Hogwarts Castles which are
~6000 pieces... And of course everyone wanted the few rare pieces that come
in those sets. I sold a lot of parts but the time it took to skim through the
instruction books to find part to find the bag was a pain in the butt. Then
there was the issue with having multiple open bags in the box dropping pieces
which slowed down the parting out process.

Not doing that again.

Author:

peregrinator

Posted:

Jan 12, 2022 13:21

Subject:

Re: What Would You Do Different?

Viewed:

51 times

Topic:

In Announce, StickyBrickit writes:

Just a thought experiment for those of you who run a store. If you could go back
in time to when you started selling Lego, what's the one thing you'd
do differently?

I'd probably focus more on minifigures and minifig parts.

Author:

StickyBrickit

Posted:

Jan 12, 2022 13:20

Subject:

What Would You Do Different?

Viewed:

219 times

Topic:

Author:

Brickitty

Posted:

Jan 11, 2022 15:22

Subject:

Re: How do I remove yellowing

Viewed:

61 times

Topic:

In Announce, Adjour writes:

In Announce, Oliverbricks writes:

Hello everyone I was wondering how do I remove yellowing on my sand green part.
I have 32 sand green 1x8 bricks and if you know there quite expensive but they
have yellowing on them. I want to remove the yellowing without damaging the part.
If you know how to please let me know.

Thanks,
Oliver

As far as I know the peroxide trick only works on white and old grey. I think
it changes the color too much on the other colors.

If you find a solution let me know, I have some older ones like this as well

Crystal

Unfortunately, it only works temporarily (the bricks will usually return to an
even more yellowed state in 6-18 months) AND it makes the bricks much more brittle.
Nearly every piece I tried it with cracked when I tried to assemble them with
other parts.

Author:

iprice

Posted:

Jan 11, 2022 14:41

Subject:

Re: How do I remove yellowing

Viewed:

50 times

Topic:

In Announce, Oliverbricks writes:

Despite repeated posts on siocial media about using hydrogen peroxide WhiteBright
etc. from what I've seen and read the whitening effect may be limited long-term
and may actually make the situation worse - look on YouTube for DownUnderBrick's
video about it ("WARNING: DON'T DO THIS TO YOUR LEGO!")

Author:

Adjour

Posted:

Jan 11, 2022 14:38

Subject:

Re: How do I remove yellowing

Viewed:

38 times

Topic: