Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | calsbricks  | | Posted: | Oct 5, 2015 10:17 | | Subject: | Change to the way Bricklink Present fees | | Viewed: | 158 times | | Topic: | Suggestions | | Status: | Discarded | |
|
| For some time now we have had considerable difficulty in reconciling the fees
statement to our accounts system. The fees are always paid - there is no problem
there, but the fact that it is a summary rather than detail and the conversion
rates may or may not be different it makes it a job rather than just a quick
check.
We would like to see each store given the option to receive either the summary
or a detailed breakdown. The detailed breakdown should include each order the
store is being charged for the date and value of that order and the calculated
fee + currency conversion rate.
Those of us who do not deal in dollars would like that information available.
Those who don't require it can remain with the summary.
If the fees program is within the code for Bricklink, this should not be a complicated
change as it has all the info already. If it is in another system that would
have to be looked at but even today's most simple billing programs allow
for this type of information to be presented.
|
 |
| Author: | brox999 | | Posted: | Oct 1, 2015 00:40 | | Subject: | View stockroom bypass password | | Viewed: | 123 times | | Topic: | Suggestions | | Status: | Discarded | |
|
| Hi, buyer saw an item in my store and is sending a list of what he needs. I have
20,000+ parts to work through and it would be useful to allow him to view my
stockroom via a bypass password like you can allow access if your store is closed,
worth considering as an enhancement
Regards
Andrew
|
|
| Author: | JulieK | | Posted: | Jan 25, 2016 21:51 | | Subject: | Min order amount for domestic & international | | Viewed: | 154 times | | Topic: | Suggestions | | Status: | Discarded | |
|
| It would be nice if sellers could set a minimum order amount for domestic and
another for international.
Having to pay 4% to Paypal on money that goes to the USPS makes it a tough call
on accepting international orders.
I've been debating with myself on what to do with international and I think
having a separate minimum for domestic and international would help me figure
out a solution.
Maybe it would help others too.
Julie
|
|
| Author: | StormChaser | | Posted: | Feb 20, 2016 03:19 | | Subject: | Stop Linking to LUGNET | | Viewed: | 286 times | | Topic: | Suggestions | | Status: | Discarded | |
|
| I suggest that BrickLink remove all links to LUGNET from catalog pages.
http://www.bricklink.com/message.asp?ID=920504
I just tried to use the LUGNET website and it does not appear to be functional
anymore.
|
|
| Author: | calsbricks | | Posted: | Jan 8, 2016 02:54 | | Subject: | Bricklink logins/accounts | | Viewed: | 268 times | | Topic: | Suggestions | | Status: | Discarded | |
|
| This one has been around a long time and unfortunately nothing seems to be happening
with it.
Bricklink needs to change the way the login/accounts function works. As a medium
sized store with an owner and 3 employees we need to allow the employees to log
into Bricklink and update store inventory, prices etc almost every day and as
things currently stand they have to use the owners login details (Poor security).
SQL, which is used for the database has quite a good security system built in
so even if we went native with that, it would be better than the current situation.
The same thing applies for stores with multiple locations - we have two processing
centres - one where all of our Lego inventory is stored, picked etc and one where
orders are packed and shipped from. Hence we want to set up a shipping from address
and a shipping to address. The fact that not all stores support the alternate
address system on Bricklink, as it currently stands means the only real way to
do this is using alternates on Paypal (for those that use Paypal).
So in summary - multiple logins to the stores with security/control permissions
and a minimum of 2 address for each store - one for ship from and 1 for ship
to.
As an afterthought it might not be a bad idea to allow store owners to have two
accounts - one for buying and one for selling, with the appropriate feedback
associated with each function. This might make a difference as to how people
look at a situation - In our case we have over 800 buying feedback and over 2000
selling feedbacks.
|
|
| Author: | PaulOfBricks | | Posted: | Jun 3, 2016 17:32 | | Subject: | File option on Order placed | | Viewed: | 133 times | | Topic: | Suggestions | | Status: | Discarded | |
|
| I would like the file option to be available on all my 'orders placed'
regardless of the current order status.
I have had a couple of orders that I have placed where the seller has shipped
me the items, but for reasons unknown has left the status as either 'paid'
or 'packed'.
The seller is either not responding to my messages to update the status or doesnt
want to change the status and thus I am unable to file my order, until the status
is changed completed. I am unable to change the status while it is Paid or packed
the seller has complete control.
Many thanks
|
|
| Author: | calsbricks | | Posted: | Feb 19, 2015 03:54 | | Subject: | Message options | | Viewed: | 88 times | | Topic: | Suggestions | | Status: | Discarded | |
|
| Would like to see the Bricklink messaging system offer options for plain Text,
Rich Text and html if possible. This would allow the use of formatting where
required or needed.
|
|
| Author: | eileenkeeney | | Posted: | Jan 8, 2015 17:37 | | Subject: | Require sellers to pass a test before selling | | Viewed: | 422 times | | Topic: | Suggestions | | Status: | Discarded | |
|
| I am not even certain I think this is a good idea, but I had this thought.
Suppose Bricklink required that one pass a simple test, before being able to
sell on Bricklink.
The test would require that one be able to use the catalog, to verify the part
and color that they are offering for sale.
Such things as the length in dots (or diameter in case of something like a rubber
band) could be done with pictures (like showing something that is 5 lego dots
long, next to a Lego plate, aligned so one can see how many dots long it is,
and having them select the correct length from multiple choices).
Or maybe include some pictures of pieces in some colors that are close, but different
enough to easily identify.
Or maybe a better idea is to present sellers with a verification popup, when
listing certain part/color combinations.
- Anytime a color is listed, that is no longer in production, a popup asking
the seller to verify the color, and telling them the color has not been produced
since (year), would avoid some errors.
- Anytime it is a part/color combination, that is not one that is known to have
been in any set, a verification popup would be useful.
|
|
| Author: | jodawill | | Posted: | Feb 20, 2015 19:53 | | Subject: | Ask for feedback before implementing… | | Viewed: | 293 times | | Topic: | Suggestions | | Status: | Discarded | |
|
| Suggestion: Ask the community for feedback before implementing any new features
or creating new partnerships. It seems obvious that the BL admins are out of
touch with what direction the community would like to see BL go, so this would
be a great way to prevent asinine decisions.
2¢
|
|
| Author: | bb518140 | | Posted: | Feb 27, 2015 16:22 | | Subject: | Pop-up Warnings | | Viewed: | 219 times | | Topic: | Suggestions | | Status: | Discarded | |
|
| One thing that I think would be helpful on Bricklink is if there was a pop-up
warning whenever you try to leave a page that has been modified. I have seen
this on other sites, and it is easy for me to enter quantities for items I want
and then forget to add them to the cart before going to the next page. I'm
not sure if this is possible or practical with the current infrastucture, but
I think it would be useful.
|
|
| Author: | jeffmcclain | | Posted: | Jun 6, 2015 12:32 | | Subject: | Orders Download Feature | | Viewed: | 143 times | | Topic: | Suggestions | | Status: | Discarded | |
|
| Hello,
It would sure help out a LOT if in the "download orders" list, you could separate
out the "Item Description" to be 3 separate columns: Type (brick, plate, tile,
slope, etc), Description (1x3, round, etc.), and Color, rather than it all combined.
This would make it MUCH easier to pivot by item number, type, color, etc.
Thanks!
Jeff
|
|
| Author: | Grego | | Posted: | Jan 10, 2016 20:25 | | Subject: | Best Thread list | | Viewed: | 198 times | | Topic: | Suggestions | | Status: | Discarded | |
|
| I would like to see a permanent Topic like CL's Best of Craig's list
Topic
They've got a couple running right now that would surely be nominated for
the Best of list.
or failing that, the ability to do a mash-up so we could end up with combinedthreads
like:
Searching for Free 2014 Stormtrooper shipping ...to double up on the fun.
|
|
| Author: | pippo93 | | Posted: | Jun 5, 2016 10:12 | | Subject: | Shipping suggestion for Poste Italiane | | Viewed: | 72 times | | Topic: | Suggestions | | Status: | Discarded | |
|
| Hello everybody, I'm an italian seller and I think that should be useful
for me and for other italian seller to make an automatic shipping suggestion
for Poste Italiane, the italian postal service. I would be happy to help Bricklink
staff if they want to add this feature!
What do you think about this suggestion?
Best regards,
Filippo.
|
|
| Author: | enig | | Posted: | Apr 21, 2016 02:50 | | Subject: | Disable automatic quote cancellation | | Viewed: | 126 times | | Topic: | Suggestions | | Status: | Discarded | |
|
| Well known problem
http://www.bricklink.com/message.asp?ID=983078
solution
* If some item(s) get removed/sold/etc generate an automatic Item Removal Request
(IRR), stating what has happened. At the same time, give the buyer a singe click
solution to cancel the quote request all together, in case the missing item poses
an issue.
OR
* just create an action item for both buyer and seller, leave it for them to
solve it but DO NOT auto-cancel the whole thing. Make is so the invoicing is
impossible if the item(s) were not removed from the quote via IRR (I guess it
would require to create an item removal request process from a QUOTE)
OR
AUTO-CANCEL the quote, but give the buyer a single-click solution to place the
same quote request again, where the missing items are excluded.
OR
* whatever else.. just do it quick, please. Whatever it will be, please keep
in mind that new buyers often use the quote-request thing without having a slightest
clue what it's for. Whatever will happen after *items are now missing form
the quote request*, MAKE SURE that it is, first and foremost, new-user friendly.
|
|
| Author: | flyingo330 | | Posted: | Jul 19, 2013 02:52 | | Subject: | Bricklink 2.0 & Brickstore | | Viewed: | 248 times | | Topic: | Suggestions | | Status: | Discarded | |
|
| Hi everybody,
Would it be possible to keep Bricklink 2.0 compatible or able to work with the
program Brickstore. I find it very useful to be able to download my orders. Sice
they get purged after 6 month, it is the only way to keep them forever.
Thank you for reading.
Best regards,
Olivier
|
|
| Author: | calsbricks | | Posted: | Jul 19, 2013 03:25 | | Subject: | For Bricklink 2.0 | | Viewed: | 180 times | | Topic: | Suggestions | | Status: | Discarded | |
|
| I am not sure these have all been covered completely before or it may have
been in several different items/issues, but we would like to see the following
improvements in the next release of Bricklink.
1. Improve the colour samples to include larger swatches, Lego Colour Name; Pantone;
CMYK, RGB. It might even help to include the Peeron Colour name. Colours are
very important to lots of people and they also have a direct bearing on pricing
(unlike Lego)
2. Improve the images in the catalogue both small and large. Remove sketches
and where there are subtle differences between parts e.g. ....a and ....b make
it clear what those are (in photos of course).
3. Major issue with tire and wheel identifications. The relationship idea helps
somewhat as does the visual wheel thing, but neither are complete and they are
not kept up to date. Where Lego has a part number fine, but many do not or it
is impossible to read. Considering Lego are the world's largest tire manufacturer
we should do better here.
4. Our age old - please allow multiple users to have access to the stores. The
larger the store, the more likely there is more than one person dealing with
it and all of the individuals need to be able to get in with different permissions,
as required. We are based in two locations and share access to the store at both.
That is not ideal, as you can imagine, and of course with only one login everyone
can do everything.
There are many. many more itmes to be dealt with but the suggestion forum does
not seem to be the best place to get things moving.
|
|
| Author: | TMM | | Posted: | Jul 19, 2013 05:37 | | Subject: | BL 2.0 - Storage & Remarks | | Viewed: | 198 times | | Topic: | Suggestions | | Status: | Discarded | |
|
| Hi Everyone,
I know that a lot of what's being suggested is already implemented however
most of the people posting the topic didn't know so I'm sorry if this
is something which is ready available in BL or a third party program to which
I am unaware.
My suggestion comes around the storage and remarks system, after all most of
us stock more parts, and a larger breakdown of parks than your average online
store.
Point A.
Firstly, when I part out a new set and I choose to consolidate old remarks I
don't find out if the item has any previous remarks until I have entered
the remarks myself.
I would personally like to see you choose to part out a set and a list come up
of all the parts that are in that set which you already have in store and the
remarks section to be pre-filled with where you have the same item in the same
condition, allowing you to quickly put away all the parts you already have in
stock.
Then the next page would show you the parts which you don't already have
in your inventory and you would add those parts just like you do now, filling
in the fields you require.
I know this may not be an option to everyones taste but I think it would make
my life easier, so perhaps just the option to have a set up like this or similar
would be nice.
Point B.
To take this further I thought about a system where you documented your storage
system for example I use small boxes which are numbered. I use an excel document
to mark what is in each box by colour, category, part type and condition.
So what if I loaded those details into a database and the database told me what
I had in each box based on the remarks field and what I have said should be in
there for example...
All new 2x2 tiles should be stored in box 20.
I add that to the database.
I can then use the database to see what is in box 20 and based upon my inventory
it says I have the following;
x1 Black New 2x2 tile
x4 Yellow New 2x2 tile.
This would allow me to do a stock check much faster, and would allow me to find
errors not just on the stock levels but on remarks. In addition to this I think
if this was successfully implemented it would remove the need for remarks when
stock counting and order picking all together.
But what about when your listing items...
Well...
Based upon what I have entered into the database... that all new 2 x 2 tiles
should be stored in box 20 the system could provide me with a storage recommendation
even if I for example don't have that colour in the box already it would
see that the tile is in new condition, it is a category tile, and the size is
2 x 2 therefore based on what I have entered it should be stored in box 20.
I hope this makes sense, and I hope you all say it's something which I haven't
found yet but is ready available because I want it NOW!! haha.
Thanks 
|
|
| Author: | BLUSER_262860 | | Posted: | Jul 19, 2013 07:16 | | Subject: | BL 2.0 Store Lists - Overview | | Viewed: | 142 times | | Topic: | Suggestions | | Status: | Discarded | |
|
| Hello
I also have a proposal that could be implemented without much effort.
Everybody sees in all Shoplists (summaries), only the total number of stones.
I am of the opinion that the number of different lots is also an important information.
Example:
Shop A - 1,500,000 Stones but only 100 lots
Store B - 50,000 but 10,000 Lots
If I had many different stones Store B is much more interesting, for me.
But you find not so good such stores, because the Lots are not indicated in the
tables. (Store B looks at first glance less attractive as Store A.)
You always have to go into every shop to see the number of lots.
|
|
| Author: | WILYKAT | | Posted: | Oct 15, 2013 06:25 | | Subject: | remove old link to chat room | | Viewed: | 165 times | | Topic: | Suggestions | | Status: | Discarded | |
|
| Click MyBrickLink tab
click My Activity
scroll down to the bottom
If you have been in the chat room before it was killed over a year ago, it'd
show the time spent in char room. Oddly the link still "works" even though it
leads to error page since the chat no longer exists.
Suggestion: remove link tag, convert "Minutes in Chat" to plain text for us old
people.
|
|
|
| Author: | ToriHada | | Posted: | Mar 11, 2014 17:32 | | Subject: | System Generated Superlots | | Viewed: | 177 times | | Topic: | Suggestions | | Status: | Discarded | |
|
| Superlots are a great way to list multiple items for sale together. However,
superlots are confusing and difficult for many to bother setting up. To help
increase the usage of superlots and avoid misunderstandings with buyers regarding
what items do or do not go together, I suggest that BrickLink add pre-set
system generated superlots. These superlot templates would be created by contributors
to the BL catalog. Thus, for example, when adding a collectible minifigure to
the BL catalog, the submitter can also have the option to submit a superlot that
others can use to sell that minifigure with accessories as a superlot. Similar
superlots can be proposed for commonly paired items - like windows and glass,
window/door frames and their matching window or door, right and left wedges,
etc. When listing these items for sale in one shop, BL can simply offer sellers
the option of listing in an already existing system generated superlot. Just
fill in the blanks for quantity and price.
Thor
|
|
| Author: | enig | | Posted: | Apr 28, 2014 19:37 | | Subject: | Red Letter reported listings | | Viewed: | 190 times | | Topic: | Suggestions | | Status: | Discarded | |
|
| When a listing gets reported and action "from the above" not yet taken, highlight
that listing (in-store) in red and/or place a WARNING Icon next to it.
This way potential buyers will be aware that there is potentially something wrong
with that listing, and pay some attention to the extended description (which
is usually the reason why listings get reported).
This would open the gates for abusive reporting, but it is possible to put some
safeguards for that if you really want.
|
|
| Author: | Andy_Bell | | Posted: | Apr 4, 2014 18:08 | | Subject: | Clarify nature of the forum | | Viewed: | 256 times | | Topic: | Suggestions | | Status: | Discarded | |
|
| based on comments here:
http://www.bricklink.com/message.asp?ID=804419
In Administrative, admin_alice writes:
| | We have another addition to the CS team to help keep up on the forum. As some
members have noted, it is not possible for us to be on the forum 24/7 and respond
immediately to questions and issues that arise.Amanda will be checking in periodically
throughout the day to keep tabs on trends and concerns. Although she can't
be there all the time either, this will improve our awareness of urgent issues
and improve our responsiveness to questions that arise.
|
and here
http://www.bricklink.com/message.asp?ID=804904
In Administrative, cs_amanda writes:
| | Up until now, the Customer Service team has not been focused on monitoring the
forums. That's not to say that they never came in and checked on things/responded
to issues, but that wasn't their primary focus. Honestly, it's just not
typical for Customer Service at most companies to actively monitor forums for
issues or concerns. However, BL is unique and the management team has realized
that there is a need for someone to do this.
|
snip
| | my first focus will be on monitoring the forums to address concerns and improve
communication back and forth between BL Members and Management.
I also think some people might be equating Customer Service to Forum Moderators.
If we were just adding a moderator, then it would certainly make the most sense
to use existing members of the forum for this position. However, this job requires
significantly more then that and my extensive Customer Service experience comes
|
snip
If BL sees the forum as only a peer-to-peer communication location that should
be made clear.
Or that only posts in suggestions, problem, problem orders, news, help and administrative
will be monitored? Topics monitored by BL staff should be noted on the topics
page.
I think the BL forum is different than that from other game and software company
forums. And should be seen and a public communication tool for the BL team in
the way that other companies use Facebook or Twitter. And they monitor those
feeds very closely.
When a post is started by or participated in my a BL staff member I think some
are under the impression that they read all posts in the thread. Comments by
BL staff indicate otherwise.
|
|
| Author: | LastingToysInc | | Posted: | May 29, 2014 09:55 | | Subject: | Change Bulk (x10) to say (in 10s) or (by 10s) | | Viewed: | 129 times | | Topic: | Suggestions | | Status: | Discarded | |
|
| The (x10) seems easily confused by new buyers to mean you get 10 for each purchase.
Ie they are thinking (*10)
And I think a clearer text would not hurt things at all right??
|
|
| Author: | MassBricks | | Posted: | May 29, 2014 10:19 | | Subject: | Sort by best price at Min Qty. | | Viewed: | 101 times | | Topic: | Suggestions | | Status: | Discarded | |
|
| For sorting search results.
Say you want 240 of some part, you put in "Min Qty: 240"
Seller 1 has "500x at 0.10 each"
Seller 2 has "400x at 0.12 each; buy 50 or more for 0.09 each"
The current sort will show seller 1 first, but the cheapest option (all other
things being equal) would be seller 2.
A Sort by "Best Price at Min Qty" would sort by the price of the highest bulk
tier under the specified "Min Qty" of each listing.
Another option could take into account savings if the min qty is near a bulk
tier. E.g. Seller 3 has "buy 250 or more for 0.08 each" - buying 250 from this
seller costs less than buying 240 from seller 2.
|
|
| Author: | jedvii | | Posted: | Jan 23, 2015 21:39 | | Subject: | better searching | | Viewed: | 118 times | | Topic: | Suggestions | | Status: | Discarded | |
|
| I feel that if I search for "curved 1x4" or "curved 1 x 4" then 6191 Brick, Modified
1 x 4 x 1 1/3 No Studs, Curved Top should show up in the search results. it
does if you search "curved 1 x 4 x 1".
Also, if I search for 3747, I should be able to see 3747a and 3747b. instead
I get the set 3747-1 Locomotive Gray Bricks. This is maddening when I see a
part number under a piece and type it in only to discover that there's an
a or b.
|
|
| Author: | WILYKAT | | Posted: | Apr 22, 2015 02:05 | | Subject: | suggest fixing the offline image | | Viewed: | 156 times | | Topic: | Suggestions | | Status: | Discarded | |
|
| The offline image still shows illegal non-LEGO part being used for hinges on
the top. I would suggest using
and
they can form equivalent 2x2 to 2x2 hinge plates and is 100% legal LEGO build.
|
|
|
| Author: | Locutis | | Posted: | Jan 28, 2011 08:39 | | Subject: | Credit Card required to sell on BrickLink | | Viewed: | 500 times | | Topic: | Suggestions | | Status: | Discarded | |
|
| BrickLink should setup a system where a seller would need to have a credit card
to sell on BL, and BL charges the seller a small amount (say $5) to setup the
store, and activate it, and verify the seller's information that is on BL against
the credit card.
The $5 would offset any costs associated with checking names/addresses. Once
BL has a card # and a charge on it, they can verify the name and address to the
card, and they know that they are dealing with a real person, at a real address.
Or, maybe make this an option, and have a store icon that shows that the seller
is verified.
Or, perhaps make this a requirement only if the seller wishes to sell high value
products, or lots of items valued at a high value.
I would gladly do this for my store, to show that I'm legit and serious about
selling.
Locutis
Resistance is futile.
|
|
| Author: | DarkDragon | | Posted: | Mar 8, 2011 13:37 | | Subject: | Make a Wanted List Public | | Viewed: | 178 times | | Topic: | Suggestions | | Status: | Discarded | |
|
| Would be nice to have the ability to make one or more wanted lists "public" so
that if a link was provided to the list other folks could see the list. This
would work similar to Amazon.com wish list in that others can see but not edit
the list.
In my mind, this would be a check box on the wanted list settings (and creation)
screen. Default would be unchecked (meaning private).
[X] Public List
It would be useful in facilitating purchases for gifts (like little Tommy wants
a bunch of batman minifigs so he adds it to his wish list so grandma can buy
one for him by viewing his list), and for facilitating trading because people
can see what the seller would like as payment for the trade items.
Everything else about the wanted list would work the same as it does now - except
that if viewing by someone other then the owner there would be no editing fields
available.
|
|
| Author: | Lonely_Brick_OH | | Posted: | Apr 21, 2011 19:45 | | Subject: | Locked forum for ADULTS ONLY. | | Viewed: | 379 times | | Topic: | Suggestions | | Status: | Discarded | |
|
| Based upon the message posted by;
Re: I am falling off the list -- here's why - legoman77
A forum where you cannot be banned. You can speak your mind, argue like an idiot,
mock people, attack people at will, be a jerk, be a jack wagon, or whatever else
you wish.
THIS WOULD BE AN OPT IN ONLY with an adult warning on it!
Think it would be fun.
This forum would NOT be listed on the forum post stats! And it would be a no
man's land for banned and unbanned people alike.
If it gets out of hand NO SUPPORT AT ALL BY MODS/ADMIN/G-D.
Since it would be an opt in ONLY, just do not go there if you do not wish to
be offended!
Great idea.
I would like to see it called THE WILD, WILD FORUM (with a cowboy and Indian
as the icon's for it).
|
|
| Author: | JediRob | | Posted: | Oct 5, 2011 14:30 | | Subject: | Shunning | | Viewed: | 341 times | | Topic: | Suggestions | | Status: | Discarded | |
|
| I would like the ability to not "Ignore" but "Shun"
When someone is being a Troll, or even being somewhat unhelpful, and also posting
on the wrong thread...
Shun, not block, just list in red. That way, I know he's being a "Troll light."
Posting relevant comments, but in the wrong thread...
Or, Reconnect would be good... Remove the posts from Brasletty's post, and put
them where they belong...
Or... Posters could bother to rename the thread (lazy BrickLinkers!)
-R (also with many 's)
|
|
| Author: | monkeynut12 | | Posted: | Nov 15, 2011 09:04 | | Subject: | Buying from yourself | | Viewed: | 342 times | | Topic: | Suggestions | | Status: | Discarded | |
|
| There may be an action for this that is similar and I don't know about it, but
here is my random suggestion anyway.
I operate out of two locations, one location has my personal collection (home),
and my apartment has my store. I commonly visit home and need items from my store
at my apartment. I believe it could be nice to have the ability to shop in your
own store and place an order with your self, that way you have a nice record
of everything you want to take from your own store and it would remove it from
your own store in one action. OF COURSE!! you would not be able to feedback
yourself, and this transaction would not effect the price guide, it would have
to be a separate system. For example, you build your cart in your own store,
and on the check out page select "personal order" so that your "order" is not
technically a Bricklink order. I hope this makes sense. And if something like
this exist, please let me know because I will use it like crazy!
Henry
|
|
| Author: | AlbusDumbledore | | Posted: | Jan 4, 2012 16:08 | | Subject: | Bricklink should remember your cart | | Viewed: | 215 times | | Topic: | Suggestions | | Status: | Discarded | |
|
| I would like to suggest that you can choose to 'save' a cart on BL, and that
i kept for, eg a week. At the moment it isn't kept after you log off, so if I
want to place an order tomorrow, I either have to do it today or copy & paste
into word, then go to the trouble of finding all the items again. Thoughts?
|
|
| Author: | aftepes | | Posted: | Dec 21, 2011 12:49 | | Subject: | Update Help Desk and OCR for Customs issues | | Viewed: | 121 times | | Topic: | Suggestions | | Status: | Discarded | |
|
| Based on the discussion of this post:
http://www.bricklink.com/message.asp?ID=599326
A formal suggestion to update to the Help Desk to include:
"BrickLink is fully committed to fair and honest competition among all sellers
who use this site. Compliance with applicable laws is the best means by which
to ensure that such competition is fair and honest. Although it is not BrickLink's
job to police or enforce those laws, for the benefit of the entire BrickLink
community and to put into practice the commitment noted above, we reserve the
right to take action against any members we reasonably believe have violated
any laws to gain an unfair competitive advantage over other members. Such action
may include a warning, temporary suspension of site privileges, or termination
of membership for repeat offenders. We believe a clean honest marketplace best
serves the interests of BrickLink and all its members. If you cannot play fairly
with others, you may be asked to play elsewhere."
In addition, add "Buyer requested customs fraud" as a reason for sellers to cancel
an order AND to remove feedback (but, for feedback removal, only if the request
is made in the Order Comments or via a BrickLink message which can be easily
confirmed by Admin, or if undisputed by the buyer).
|
|
| Author: | TorontoLego | | Posted: | Oct 20, 2010 13:58 | | Subject: | Allow Banned Subjects. | | Viewed: | 297 times | | Topic: | Suggestions | | Status: | Discarded | |
|
| I propose that the Forum rules that outlaw discussion of Religion or Politics
should be lifted in times of
"Extreme discourse".
We could have a pre-set background colour change as the discourse becomes more
extreme.
The Green background could turn to Yellow if discussions are ongoing about items
for sale --
Chrome bricks, custom parts etc.
The background would then turn to RED if discussions are ongoing about individuals
and ethics/morality.
When the Yellow background is up - members would be encouraged to post OFF TOPIC
items, jokes, links to cute videos etc.
When the RED background is up - free for all -- anything to change the subject
-- Dirty Jokes, links to "other" videos, Religion and Politics discussion --
EVEN posts to e-bay LINKS selling LEGO instead of just posting all the info necessary
to see it without a simple one click solution !!!!
|
|
| Author: | ToddWebb | | Posted: | Nov 17, 2010 15:02 | | Subject: | Alert to typos! | | Viewed: | 237 times | | Topic: | Suggestions | | Status: | Discarded | |
|
| Obvious typo: http://www.bricklink.com/store.asp?sID=105097&itemID=15921285
Nobody intends to sell this for $33 EURO a piece:
My solution shown here. Hey new Admins, please consider adding this feature.
See my photoshopped red text in the image. This would be awesome.
(and personally, I'd love to know when my items are 25% or more below
average, too)
Thank you,
Todd
|
|
| Author: | Timothy_Smith | | Posted: | Dec 11, 2010 06:25 | | Subject: | Stop purging data | | Viewed: | 401 times | | Topic: | Suggestions | | Status: | Discarded | |
|
| My suggestion: stop purging data.
It's the 21st century, mass storage is cheap.
There's no at all reason to purge data ever.
|
| Author: | bb75359 | | Posted: | Dec 30, 2010 07:14 | | Subject: | Are suggestions still worth making? | | Viewed: | 183 times | | Topic: | Suggestions | | Status: | Discarded | |
|
| Are suggestions still worth making. I ask as none have been implemented since
September.
Without sounding rude..... the reasons are known to all of us why, but no suggestions
have been implemented since September so is the new Admin going to do them or
is Bricklink now running as good as it is ever going to run with no more implemented
suggestions?
|
|
| Author: | TorontoLego | | Posted: | Dec 20, 2010 17:30 | | Subject: | Committee for Listing Violations | | Viewed: | 260 times | | Topic: | Suggestions | | Status: | Discarded | |
|
| The responses to this got me thinking:
http://www.bricklink.com/message.asp?ID=498526
Would committees be a good thing for BL?
I suggest a committee of 3 people for Listing violations: Have the problem reports
sent to 3 members (maybe even conceal the store/user name) and let them vote.
2 votes and the listing gets removed.
I'm sure we would be able to find members for a committee of 3 or maybe 5 very
quickly and that decisions on listings would be decided very quickly.
Obviously Admin and/or the CO would be able to appoint/remove those committee
members and Admin and maybe the CO would also be able to overrule them.
Mike.
|
|
| Author: | renhoffman | | Posted: | Dec 31, 2010 19:35 | | Subject: | Wanted list notification time out, solution 2 | | Viewed: | 63 times | | Topic: | Suggestions | | Status: | Discarded | |
|
| Ok, I have two different ideas to solve the problems with wanted lists timing
out. Here is solution one, solution two will follow shortly, please just vote
on the one you think might be the best way to address this.
So, when a seller uploads a large number of lots, and then attempts to notify,
the system can time-out due to too many emails being sent. When a seller tries
to send the notifications, a certain number are sent, and then the system stops
them from being sent. If the seller tries again, the same number of notifications
are sent, and then the system stops them at about the same point. This appears
to the buyers that have received multible emails from said seller, that the seller
is trying to spam them, when in fact they are just trying to send out notifications
once. Here is the real problem, this seller can no longer send out correct notifications,
because the original notifications remain in the system as "unsent". If they
add more lots, and try again, it repeats the cycle shown above, sending the same
people notifications.
Please allow sellers to "clear notifications", so that if they have too many
lots to notify, they can start over, and continue to add notifications at a later
date, only for new lots.
Again, please check my other suggestion, and vote on the best idea to solve the
problem.
Thanks so much,
Darren
|
|
| Author: | renhoffman | | Posted: | Dec 31, 2010 19:35 | | Subject: | Wanted list notification time out, solution 1 | | Viewed: | 77 times | | Topic: | Suggestions | | Status: | Discarded | |
|
| Ok, I have two different ideas to solve the problems with wanted lists timing
out. Here is solution one, solution two will follow shortly, please just vote
on the one you think might be the best way to address this.
So, when a seller uploads a large number of lots, and then attempts to notify,
the system can time-out due to too many emails being sent. When a seller tries
to send the notifications, a certain number are sent, and then the system stops
them from being sent. If the seller tries again, the same number of notifications
are sent, and then the system stops them at about the same point. This appears
to the buyers that have received multible emails from said seller, that the seller
is trying to spam them, when in fact they are just trying to send out notifications
once. Here is the real problem, this seller can no longer send out correct notifications,
because the original notifications remain in the system as "unsent". If they
add more lots, and try again, it repeats the cycle shown above, sending the same
people notifications.
Please add a "reccommended maximum lot addition" that will fall within the limitations
of the Bricklink system, to the help section on mass uploads. This would require
the help of some sellers, perhaps keeping track of some uploads, and notifications.
the info could be used to come up with a realistic number of lots that most likely
would not time out.
Again, please check my other suggestion, and vote on the best idea to solve the
problem.
Thanks so much,
Darren
|
|
| Author: | Lonely_Brick_OH | | Posted: | Jan 27, 2011 20:39 | | Subject: | Daily or Weekly limit on new sellers! | | Viewed: | 275 times | | Topic: | Suggestions | | Status: | Discarded | |
|
| I have some ideas on how to fix this problem.
Put a limit on the number of transactions allowed for new sellers.
One per day or 3 per week until established as a seller.
That would limit the damage done by a new seller.
I feel for the buyers that are not familiar with feedback system to spot these
styles of fraud.
|
|
| Author: | Old_No7 | | Posted: | Feb 19, 2011 14:37 | | Subject: | In store show wanted list options. | | Viewed: | 63 times | | Topic: | Suggestions | | Status: | Discarded | |
|
| Hello,
Love the wanted list, but a few things are hit and miss. I think one of the misses
is when browsing a store with a large wanted list, you often get multiple hits
for items (new & used) so I figured why not choose which you want to see when
you get to a store.
Here's what it could look like.
Thank you for voting,
Eric
|
|
|
| Author: | Scrp749 | | Posted: | Mar 2, 2011 14:35 | | Subject: | Adding 'pending items' to wanted list | | Viewed: | 95 times | | Topic: | Suggestions | | Status: | Discarded | |
|
| I do know 'pending items' are pending for a reason: no one offically has them
yet, Lego has not released them for sale or display. However, I'm assuming the
people who add certain 'pending items' to the catalog have inside info that the
general population doesn't have. Please let me know if I am wrong, but items
that are currently pending have a high probably of officially being released?
My suggestion would allow items pending on Bricklink (i.e. soon-to-be-released
sets) to be added to an individual's wanted list now. That way someone could
be notified as soon as someone else on Bricklink is either selling the set or
inventorying it.
Example: I'm very interested in set 8110-1 Unimog U400. When will it officially
come out? Either I have no general idea, or I've missed a thread somewhere giving
these details. Or maybe I suck at Online researching. What better, and more lazy,
idea than to let Bricklink's wanted list notifications send me a message?
Just throwing another suggestion on the table for ya'! Thanks for reading,
- Chris
|
|
| Author: | DetBrk | | Posted: | Apr 22, 2011 14:48 | | Subject: | Wanted list feature I'd love to see | | Viewed: | 146 times | | Topic: | Suggestions | | Status: | Discarded | |
|
| Color selection when adding an element to the wanted list:
"All colors EXCEPT xx colors"
This may have ben suggested before...if so, please forgive. I'm not sure how
such a thing could be implemented with the current pull-down interface, but MAN,
this feature would save me a lot of time and wanted list clutter.
Thanks for considering
|
| Author: | Warp | | Posted: | Apr 30, 2011 15:03 | | Subject: | See Wanted list | | Viewed: | 128 times | | Topic: | Suggestions | | Status: | Discarded | |
|
| I find it hard to see who is wanting a piece in my store, but mostly
showing what I want is hard. I think this would help with marketing and
trading--a lot!
|
| Author: | Warp | | Posted: | May 18, 2011 19:14 | | Subject: | Make Wanted list Public | | Viewed: | 152 times | | Topic: | Suggestions | | Status: | Discarded | |
|
| We need publicly visible Wanted lists!
I think that would be better for the trading on here, so that you don't have
to poke around trying to find what someone wants...
|
|
| Author: | bb219749 | | Posted: | Jan 13, 2012 17:58 | | Subject: | Sub-condition for Wanted Lists | | Viewed: | 84 times | | Topic: | Suggestions | | Status: | Discarded | |
|
| My first suggestion. It probably won't be implemented, but it's worth a shot.
Let's say I'm looking for one of these:
I add it to My Wanted List as a "New" conditioned set. I also want it to be
"Complete" or "Sealed". There is no option for this, so when I look for the
set through my wanted list, I see new sets, but not necessarily complete or sealed
sets.
I have to manually check the shops to see if it's not just the "Jeep Only" or
something like that.
Do you think that we could get something that would add a sub-condition to the
filter for wanted lists?
If there is something like this already, please reply with a link and let mods
cancel the thread.
Thanks in advance,
--JDB
|
|
| Author: | bb295435 | | Posted: | Mar 19, 2012 19:02 | | Subject: | Wanted List Update from Shopping Cart | | Viewed: | 117 times | | Topic: | Suggestions | | Status: | Discarded | |
|
| I would like to recommend that after placing items in a shopping cart, my wanted
list gets updated to indicate that the item/quantity that has been allocated
for purchase (in x shopping cart at y store for example).
The justification is that I frequently find that not all my wanted list items
are satisfied by one vendor so I end up exerting alot of effort to manage what
I've allocated and what's remaining.
With this feature it could be possible to better determine the full actual cost
of the wanted list collection before committing to a purchase - which would be
the case today. This feature would allow shoppers to maximize the lowest price
or most convenient approach to purchasing parts before making any actual commitment.
|
|
| Author: | BLUSER_305068 | | Posted: | Mar 13, 2012 17:35 | | Subject: | Close & Best Price Matches For Wanted List | | Viewed: | 130 times | | Topic: | Suggestions | | Status: | Discarded | |
|
| There should be an option to get both the "Cheapest Match" and "Close Match"
for your Wanted list.
Cheapest Match Idea: This would compare stores that have all of your wanted
items and meet the minimum quantity needed by total price. It could calculate
the total cost to buy all of those items at the minimum quantity from each store
within the results and compare them in order to provide the cheapest store with
the best overall price. I have seen stores that have all my items charging $600
for the parts and then seeing another store with the same parts charging less
than $150. It would be nice to know which store is the cheapest for my particular
wanted list right off the bat rather than sifting through and filling 100s of
carts with items just to find out manually.
Close Match Idea: For example if you have 3 items set with a minimum quanity
of say 30x, there could be a store that has 30x of two items wanted and only
29x of the third item and because of that the store won't show at all. When
in reality it would be helpful to use that store if there is nothing better just
to minimize the amount of separate orders needed to fulfill your needs. If it
showed close matches it would not only offer more options but would eliminate
the need to keep changing your wanted list quantities trying to find a store
that carries all of your items closest to the quantity you need. So you could
get 29 of that item and know that you only need to add 1x that part in another
order to complete your wanted list.
So you would have the following filters:
Exact Match - The current feature that will only show stores with all your wanted
items that meet the minimum requirement set.
Close Match - This would show stores that have all of your wanted items but a
few of them do not meet the minimum requirement. It could maybe calculate that
at least 90% of the items wanted meet the minimum requirement OR it could calculate
whether all of the items meet at least 80-90% of the minimum requirement. Whichever
produces the best results.
Thanks for reading.
|
|
| Author: | Brickwilbo | | Posted: | Dec 7, 2012 04:53 | | Subject: | Add wanted lot quantity when in store | | Viewed: | 104 times | | Topic: | Suggestions | | Status: | Discarded | |
|
| Dear Admin,
When viewing "Items On My Wanted List" in a store it shows "xx Lots Found".
The Wanted List quantity is not shown.
Please add the option to remove "(Ignoring My Wanted Qty and Price Criteria)".
The system would display the Wanted quantity per List as on the "By Shop" tab.
This option makes it easier to see how many wanted lots remain.
This new option could be added as checkbox on this page: http://www.bricklink.com/wantedSettings.asp.
Thank you for reading.
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
United Kingdom, England
New Zealand, Bay of Plenty
USA, Illinois
Canada, British Columbia
Italy, Veneto
Lithuania, Panevėžys
Belgium
Germany, Nordrhein-Westfalen
Australia, South Australia
France, Occitanie
Netherlands, Gelderland