Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | grean0308  | | Posted: | Apr 11, 2024 07:31 | | Subject: | Is this a glitch? | | Viewed: | 163 times | | Topic: | Related Software | |
|
| I don't know why that happened, but the screen of Studio became like this,
and I can't select or install the parts. Is this a glitch? How can I get
back to normal operation? I tried uninstalling and reinstalling, but it didn't
work.
|
|
 |
| Author: | dursagon | | Posted: | Apr 10, 2024 11:10 | | Subject: | LUGs | | Viewed: | 152 times | | Topic: | Off Topic | |
|
| To whom it may concern,
I wanted to check in and see if anyone was interested in a story about the ugly
side of LUGs and Lego communities that are RLUGs and receive perks from Lego.
I was a member of a Texas LUG until in 2022 I was physically attacked at their
convention by someone thinking I was in a place where I wasn't supposed to
be but was asked by another member to volunteer to retrieve something for them
as they had to stay at the location they were at. I was upset by the hostile
interaction, and I reported it as well as told my wife about the incident, but
I was blown off and my complaint dismissed.
I tried to get along with my abuser for a year after that but the abuse and the
abuser acting like nothing happened bothered me more and more. Then in 2023 I
reported the incident again to the group Ambassador who blew me off and told
me they didn't want to deal with it and I needed to confront my attacker.
I explained to them my past experiences and that I would be too intimidated to
do that, and nothing was done. To explain, I'm Neurodivergent and a victim
of extreme childhood abuse which is why I've collected Lego since 1975 to
help me get past the abuse with creativity.
With nothing being done, I then went to another member of the group who had a
lead role in the group and reported everything to them. They dismissed my complaint
by telling me they'd investigate it and get back with me but never did. At
this point, my attacker has gained more power in the group by giving a meeting
space to the group and inserting themselves into the leadership of the group.
With nothing being done behind the scenes in secret, I made the incident public
for everyone to see. With the leadership of the group now upset about it going
public, they attacked me in posts and verbally in an attempt to protect my abuser.
After they made me feel very unwelcomed, I tried going to other local clubs only
to find out that I had been blacklisted for filing a complaint about how the
group handled my incident.
As a whistleblower, I was abused further and called every ugly thing in the book
including being called crazy and needing to be on meds which is the classic American
abuser thing to say about their victim. Things got ugly and in one of the other
groups, a contestant from Lego Masters prejudged the situation and listened to
the negative blacklisting and began to play mind games by blocking me in group
chats and then unblocking me when I complained only to wait a little while and
then reblock me. All I ever did in the group is respond to requests for parts
and showed what MOCs I was working on. They even went so far as to try and instigate
a confrontation in a thread where I was fulfilling a parts request.
I know part of this is these people are abusers. But another part of this is
the greed with the people in these LUGs. Because Lego gives only so much loot
to RLUGs, these RLUGs hoard what they can get out of Lego and even go so far
as to abuse the Lego LUGBulk program as well as Project Support programs. They
fiercely defend their territories, and they attack anyone who would or could
disrupt their access to the Lego loot. I think blowing the whistle on the group's
activities to forcefully and abusively exclude someone because they were not
as influential as their abuser/attacker.
I am just trying to get the information about the ugly side of Lego collecting
can be out there so that people can be more informed and cautious about some
of the LUGs out there who are not as nice and clean as Lego would want.
|
|
| Author: | eracine | | Posted: | Apr 10, 2024 09:55 | | Subject: | Lego disapearing? | | Viewed: | 232 times | | Topic: | Off Topic | |
|
| Why is it that when a part hits the floor it disappears? It is amazing how many
pieces I have lost when a part hits the floor. Is there any science behind this?
Could I be the only one?
Eric
|
|
| Author: | Ziegelmeister | | Posted: | Apr 9, 2024 17:31 | | Subject: | Adjusting qty in Brickstore after pricing | | Viewed: | 71 times | | Topic: | Related Software | |
|
| Taking in to consideration the recent thread about accidentally inflating prices,
I spent some time looking at the most desirable parts from a set I'm preparing
to part out 5x of. Half the set was adjusted up, half the set was adjusted down
from the 6 month average.
Then I decided I wanted to give one of them to someone as a gift. So is there
a hack in Brickstore to adjust the quantities down by 20%, or should I just upload
5 and then upload another one at -1?
It's not the end of the world if it's too much of a PITA.
|
|
| Author: | tpr | | Posted: | Apr 9, 2024 04:40 | | Subject: | Want a laugh !! | | Viewed: | 214 times | | Topic: | Off Topic | |
|
| Hi all
Received an order the other day, and within 10 minutes the customer cancelled.
Fair enough, no problem - I cancelled the order.
Today had a message from the "Buyer" to say I had sent them a wrong part
- black instead of dark Bluish Grey.
Good try - but no cigar
Have to be alert in this game !!
Tracy
|
| Author: | Saitobricks.ca | | Posted: | Apr 8, 2024 14:48 | | Subject: | Eclipse! It’s started!!! | | Viewed: | 207 times | | Topic: | Off Topic | |
|
| | It has begun!!! |
|
| Author: | popsicle | | Posted: | Apr 6, 2024 12:52 | | Subject: | Experience all that you can, while you can... | | Viewed: | 357 times | | Topic: | Off Topic | |
|
| Total solar eclipse will take place at the Moon's ascending node, that is
where the Moon crosses the ecliptic from south to north, on Monday the 8th. In
two days across the North America continent
For the pathway that will allow you to experience the event more fully across
North America, check online. Nasa among others, offers a fun accounting.
|
|
| Author: | Gambit57 | | Posted: | Apr 4, 2024 00:25 | | Subject: | what is max number of neutral and neg comment | | Viewed: | 179 times | | Topic: | Off Topic | |
|
| I should have read the comments/feedback before buying from this one seller.
He left me a negative feedback after I left him a neutral one. Most of the comments
about him concerned his high price of shipping . My feedback to him was about
stuffing over 100 in two snack sized baggies. I tried talking to him but he is
very belligerent. Why does Bricklink still allow him to have a store
|
| Author: | SpartacusPrime1 | | Posted: | Apr 3, 2024 17:29 | | Subject: | Buggy connection points for new pieces | | Viewed: | 102 times | | Topic: | Related Software | |
|
| Bricklink's Studio parts update for the new 2024 pieces came with some bugs.
The new parts added for the April 2024 update don't snap together properly
(or at all) with the current parts in the program.
|
| Author: | Nubs_Select | | Posted: | Apr 2, 2024 21:09 | | Subject: | New Bricklink Feature! | | Viewed: | 265 times | | Topic: | Off Topic | |
|
| Bricklink implemented a suggestion!!!
https://www.bricklink.com/message.asp?ID=816619
on item listing pages you can now report the item for sale! when you click on
it, it brings you to the report item for sale page with the lot number already
filled out.
Now the question is. has this already been a feature for a long time and I never
noticed it or is it indeed a new feature?
|
|
| Author: | Dhobeck | | Posted: | Apr 2, 2024 12:29 | | Subject: | So I made a moc about the ketchup/mustard war | | Viewed: | 218 times | | Topic: | Off Topic | |
|
| Two fortresses stand next to each other raging wars. The ketchup gang stands
guard in their castle biding time sorting and packing Lego parts. The mustard
clan is their ruthless enemy who will do anything to stay on top.
|
|
|
| Author: | peregrinator | | Posted: | Apr 1, 2024 16:24 | | Subject: | Announcing BrickLink Dating™ | | Viewed: | 100 times | | Topic: | Off Topic | |
|
| ENFIELD, Conn. - April 1, 2024 - Announcing BrickLink Dating™
After the failure of its Trionicles line, the Lego Group (TLG) decided to throw
its hat into the ring of online dating. "And where better than BrickLink,
our site for new and used Lego™ parts?" asked Susan Williams, head of TLG's
Consumer Services division since 1978. "Prospective dating partners will
have the opportunity to list themselves as 'New' or 'Used'",
corresponding to BrickLink's most general category. Ms. Williams did add,
however, that some of the best-known features of BrickLink will be missing from
BrickLink Dating™. "We have no plans at the moment to implement any sort
of color scheme."
|
|
| Author: | CykillsGarage | | Posted: | Apr 1, 2024 15:41 | | Subject: | Your Favorite Best/Worst Bootleg toys | | Viewed: | 89 times | | Topic: | Off Topic | |
|
| what is your favorite bootleg toy, action figure, movie, or video game? post
pics! My personal favorite would have to be the Speclatron toy line from 1984.
These most definitely qualify as best-worst  . these were made as a bootleg
to Mattel's Masters of the Universe toy line from 1982. they featured gaudy
color schemes, translucent torsos with water and glitter in them, and by pressing
a small button in the back, the water and glitter would swish around, and cause
"Magic action"
LOL these are probably the worst! the main villain was named Dethlor, and was
the leader of the evil space aliens, and the hero's name was simply Hero,
obviously a knock off of He-Man. the reason why Dethlor is significant however,
he sometimes uses 1984 Man-E-Face's blaster accessory from the Masters of
The universe line. in a silver or blue color. the figures are extremely rare
and are worth a fortune believe it or not!
Post your favorites below!
-Cheers Cy Kill's Garage
|
|
|
| Author: | Saitobricks.ca | | Posted: | Apr 1, 2024 09:57 | | Subject: | Final round %50 off coupon. | | Viewed: | 119 times | | Topic: | Contests | |
|
| If you can guess what my favourite LEGO YouTube channel, video game, and set
are, you will receive the %50 off coupon!
Only applicable for the winners of both round 1 and 2.
Dhobeck
Nubs_Select
rickcraine
UTLF
You go at it! First one or closest one wins!
|
|
| Author: | Saitobricks.ca | | Posted: | Apr 1, 2024 09:47 | | Subject: | 50% Coupon Contest Round 2 winners! | | Viewed: | 52 times | | Topic: | Contests | |
|
| And the winners of round 2 are,
Dhobeck
Nubs_Select
rickcraine
CykillsGarage
UTLF
1001bricks
%35 coupon on the way!
The games selected,
Lego island
Lego racers
Lego Hobbit…boo
Lego stare war
Lego junkbot
Lego Universe
So the winners moving on to round 3 are,
Dhobeck
Nubs_Select
rickcraine
UTLF
Only one of these members will receive the %50 off coupon.
Stay tuned on how to win!
|
| Author: | CykillsGarage | | Posted: | Mar 30, 2024 20:43 | | Subject: | Who here is a Warhmmer fan? | | Viewed: | 62 times | | Topic: | Off Topic | |
|
| Hi there! I was curious who here were Warhammer 40K fans? I myself am a huge
fan, and play Necrons.
|
|
|
| Author: | Saitobricks.ca | | Posted: | Mar 30, 2024 12:09 | | Subject: | 50% Coupon Contest Round 2! | | Viewed: | 120 times | | Topic: | Contests | |
|
| This contest is a 3 round poll contest.
Round 2, submit a post of what your favourite LEGO video game is, and why.
Basic rules; one post per person and 1 game per person.
First one to submit a game that after makes the list, will receive a coupon
%35 at the start of round 3.
If you are second to submit the same game then you will not receive a coupon.
Rules subject to change if problem arises.
Round 1 winners;
Carissamiss
Dhobeck
kittybrickz
Nubs_Select
rickcraine
SMLBricksLLC
The_Boyz_Bricks
UTLF
Coupons on the way
Voted channels;
Vlogs: Pops block shop, Nubs Select, Bricksie
Entertainment: TD Bricks
Other: Just A Brick In the Bucket, Duckbricks...Boo
Historic, or Informative: bricktsar
Stopmotion Creators: TwickABrick
|
|
| Author: | Ziegelmeister | | Posted: | Mar 29, 2024 14:05 | | Subject: | Wise | | Viewed: | 108 times | | Topic: | Off Topic | |
|
| We have enough international members in here, maybe you all can help…
Long story short, I can’t open a bank account in Germany until I have an address
which is a few years off. Ideally it’s with Commerzbank since most of my transfers
are to a corporation that banks there too and I like to keep things simple.
I send about €15,000 over every year and it seems like every time I go to do
it the conversion rate drops.
Like around November the conversion was at .96 and then it dropped to .92 by
the time I did the transfer. Somebody suggested I use Wise. But can I purchase
euro and keep them in an account or can you only transfers? I’d prefer to buy
and hold when rates are favorable.
|
|
| Author: | Saitobricks.ca | | Posted: | Mar 29, 2024 13:29 | | Subject: | 50% Coupon Contest Round 1! | | Viewed: | 175 times | | Topic: | Contests | |
|
| This contest is a 3 round poll contest.
Round 1, submit a post of who your favourite LEGO youtuber is, and why.
Must fit in these catagorys,
-Historic, or Informative--Entertainment--Reviews--MOC's or Vlogs
Basic rules; one post per person and 1 YouTuber per person, then 5 will be chosen
for each catagory.
First one to submit YouTuber that after makes the list, will receive a coupon
%20 at the start of round 2.
If you are second to submit the same guy then you will not receive a coupon.
Rules subject to change if problem arises.
|
|
| Author: | Nubs_Select | | Posted: | Mar 27, 2024 19:20 | | Subject: | Bricksync question | | Viewed: | 83 times | | Topic: | Related Software | |
|
| I recently started using Bricksync and it works well however the "blmaster
on/off" option confuses me a little. it says you're supposed to never
change your inventory and stuff unless that mode is on and when you are done
you then turn it off however nothing seems to "break" if I change/add
things without turning it on and then later turn it on and off to cycle it to
process any changes I made. So my question is, am I missing something important?
I dont make it a habit to add stuff unless it's on but want to know if I'm
misunderstanding and it doesn't make a big difference if you add stuff without
turning it on or what.
|
|
| Author: | Saitobricks.ca | | Posted: | Mar 27, 2024 17:58 | | Subject: | Question for Nubs | | Viewed: | 143 times | | Topic: | Off Topic | |
|
| | Is this allowed? |
|
| Author: | Stuart9 | | Posted: | Mar 27, 2024 16:44 | | Subject: | Sunset today | | Viewed: | 192 times | | Topic: | Off Topic | |
|
| | Sadly couldn’t get an unobstructed view as spotted it late. |
|
| Author: | Dhobeck | | Posted: | Mar 26, 2024 17:18 | | Subject: | Uncode the quote first to receive 26% OFF🍦 | | Viewed: | 111 times | | Topic: | Contests | |
|
| If not Uncoded by tomorrow morning I will provide a key 🔑 and the first to Uncode
after the key has been given will receive 15% OFF
Uncode:
“OLIH LV D JLIW, EXW LW’V PRUH WKDQ MXVW WKDW. OLIH LV D FKDOODJH”
ROH NLUN FKULVWLDQVHQ
Have fun,
SirIceCreamMansBrixNFigs
|
|
| Author: | Saitobricks.ca | | Posted: | Mar 26, 2024 15:10 | | Subject: | Just a little more! | | Viewed: | 1126 times | | Topic: | Contests | |
|
| The 2000th visiter to my store gets a 10% off coupon!
Post screen shot as proof.
*only for Canada and USA*
|
| Author: | Geoff_Smith | | Posted: | Mar 26, 2024 02:20 | | Subject: | EMAIL FROM BRICKLINK TEAM | | Viewed: | 215 times | | Topic: | Off Topic | |
|
| Hello. I got what I think might be a suspicious email last night at precisely
midnight UK time ( 8pm Bricklink time ).
I didn't open it because I thought it might be a hack attempt, but it was
from Bricklink Team and the title was Attention sellers.
I'm wondering if anyone else received a similar email?
|
| Author: | Boer | | Posted: | Mar 26, 2024 02:04 | | Subject: | Change size of Callout | | Viewed: | 61 times | | Topic: | Related Software | |
|
| Hi,
I've converted a submodel (5 steps) into a callout on the page editor. The
callout is too large and does not fit on the page. How do I reduce the size of
the callout?
Thanks for the help!
|
| Author: | TheHatter13 | | Posted: | Mar 25, 2024 06:24 | | Subject: | Program with physics | | Viewed: | 61 times | | Topic: | Related Software | |
|
| Is there a Lego program that has physics included to test mechanisms? I know
you can kind of test simple movement and collisions but I am wanting to test
a full mechanism that uses gravity for part of it. This would be good for GBCs.
|
| Author: | Kbenoit | | Posted: | Mar 24, 2024 22:40 | | Subject: | How to activate an electric brick (light) | | Viewed: | 101 times | | Topic: | Related Software | |
|
| I'm trying to render with this brick lighted (switched on)
Any one know how to activate it for rendering ?
|
| Author: | Geomatik | | Posted: | Mar 24, 2024 10:09 | | Subject: | Grid function in Studio | | Viewed: | 37 times | | Topic: | Related Software | |
|
| Hello people!
I don't understand for what the grid function is for, can anybody help me
out?
Geomatik
|
| Author: | WILYKAT | | Posted: | Mar 22, 2024 23:07 | | Subject: | Question about set 40712 availabilty on BL | | Viewed: | 153 times | | Topic: | Off Topic | |
|
|
I was just checking to see what's the average price, and there's a number
of sellers who has 50+ of this set somehow. The set was gift with purchase from
LEGO. Either someone placed multiple orders with LEGO to get 50+ sets or they
got it from another means.
Any idea how would someone get 50+ of 40712 sets legally?
|
|
| Author: | popsicle | | Posted: | Mar 22, 2024 16:05 | | Subject: | That time of year! | | Viewed: | 214 times | | Topic: | Off Topic | |
|
| Did you know...
Washington state is the top U.S. producer of apples, pears, and sweet cherries?
Especially the crops in and around our volcanoes, the Rainier and St. Helens
regions with that special volcanic soil. Washington produces more than 90% of
the nation's organic apple crop.
Seems every few homes have their trees blossoming just now. Makes for a wonderful
drive to the shore
And it's days like these that I miss having to pick up my daughter on campus.
I'd arrive early just to wait under the canopy of their famous Japanese imported
cherry trees.
My daughter's alma mater's live cam: https://www.youtube.com/watch?v=ECBJeRT-sy4
-Enjoy
|
|
|
| Author: | csadn | | Posted: | Mar 16, 2024 23:52 | | Subject: | Bug In Tires (ALL OF THEM) | | Viewed: | 184 times | | Topic: | Related Software | |
|
| All Tires in Bricklink have the same problem now:
1) When mated to a Wheel, the tire always ends up on a corner of the "contact
patch" (the greenish box showing the size of the tire, rather than staying
on a side.
2) Any attempt to rotate the tire to a side results in all three rotation arrows
activating, and cause the entire model to rotate, regardless of which arrow is
used.
3) It is impossible to screenshot any of this, as any attempt to screenshot results
in the arrows being switched off.
This needs to be fixed yesterday.
|
|
| Author: | Palooka2 | | Posted: | Mar 16, 2024 14:48 | | Subject: | Set 76922-1 w parts unavailable in studio 2.0 | | Viewed: | 41 times | | Topic: | Related Software | |
|
| Hello. Can all the new parts that are part of set 76922-1 be added to studio
2.0? All of the new or stickered parts will not load on import of the set on
studio. I'm hoping this is not a time comsuming issue as i can go no further
with my builds without those parts being added. Thank you in advance.
|
|
| Author: | rickcraine | | Posted: | Mar 16, 2024 09:32 | | Subject: | Moving pieces vertically in Studio | | Viewed: | 38 times | | Topic: | Related Software | |
|
| Is there any way you can move a piece (using a key or button or something) vertically
up or down in a model without having to drag and drop the piece out and up? I
am working on a large build and just had to replace some 6x8 plates with 6x10
so it threw my whole model off a little bit and am trying to fix it in the most
efficient way possible.
|
| Author: | DeLuca | | Posted: | Mar 15, 2024 22:51 | | Subject: | Locked Thread? | | Viewed: | 102 times | | Topic: | Off Topic | |
|
| Did the Julius Caesar thread get locked for being political? I thought people
would be over that after almost two millennia!
|
| Author: | popsicle | | Posted: | Mar 15, 2024 18:21 | | Subject: | Slaughtered by those close him. Ides of March | | Viewed: | 419 times | | Topic: | Off Topic | |
|
| What does that say about our nature?
Today on the anniversary of Julius Caesar's death, Ides of March. Consider
as they say, human nature being immutable or unchanging over time What then
can be gleaned on this day, 15th of March?
-popsicle
|
|
|
|
| Author: | tprahm | | Posted: | Mar 13, 2024 23:39 | | Subject: | Studio Error from Printed Brick Import (.ldr) | | Viewed: | 55 times | | Topic: | Related Software | |
|
| When I import a .ldr file into BrickLink, all of the bricks are placed perfectly
sound, except for printed bricks. Even when the .dat item ID matches, in this
case (3069p02.dat), it still doesn't convert the file type to the actual
brick. Even if the brick exists in Bricklink, such as the 3069p02 piece, it won't
budge unless I manually change it. However, I also noticed that occasionally,
but not with this example, bricks such as 3068pb0191 will appear ONLY IF I change
the .dat file name from "3068pb0191" to "3068bpb0191". However,
I would like all of the bricks to be recognized in the Studio software. Any ideas?
And no, manual brick switches are not an option here.
|
|
|
| Author: | DelusionB | | Posted: | Mar 11, 2024 15:42 | | Subject: | Issue on the collada export. | | Viewed: | 73 times | | Topic: | Related Software | |
|
| Hello I am trying to export COLLADA files from Studio 2.0, to import them on
3dsmax and I have this issue.
Some of the bricks are not on the correct position, they seem to have lots of
gaps.
I have been dealing with this problem since the past year, and I hoped it will
be fixed by now, but unfortunately, it remain unsolved.
Could you please advise on this matter?
|
|
|
| Author: | Saitobricks.ca | | Posted: | Mar 11, 2024 14:41 | | Subject: | Is there a way make minifigs in studio? | | Viewed: | 52 times | | Topic: | Related Software | |
|
| Trying to make a random fig in studio, but any accessories or heads that go on
the torso won't go on without a fight.
I got the neck accessory on after about a halfhour of fighting, but now the head
won't go on.
I position it so it looks like it's on but as soon as I unselect it grays
out.
|
|
| Author: | Saitobricks.ca | | Posted: | Mar 10, 2024 16:54 | | Subject: | Studio, first thoughts and experience | | Viewed: | 81 times | | Topic: | Related Software | |
|
| Just downloaded studio yesterday, and tried it out.
First model turned out good, was very surprised at how easy it was to use.
|
|
|
| Author: | tlubionicle | | Posted: | Mar 10, 2024 13:27 | | Subject: | QUIZ FOR MY THESIS. THIS IS LEGO RELATED. | | Viewed: | 113 times | | Topic: | Off Topic | |
|
| Hey fellow LEGO enthusiasts!
Theres link below to my Bionicle quiz. (made with google Forum). I centered it
around our beloved Bionicle universe! As part of my research Im doing for my
uni, I designed a super fun and challenging Bionicle quiz, and I thought I'd
share it with you all because who doesn't love a good quiz, especially when
it's about Bionicle, right?
You don't need to be a bionicle fan to do this! : D
https://docs.google.com/forms/d/e/1FAIpQLScXdKkBt9NWJ8ZMR9XdUtNvSmq3CaC5iBj-aP7gDVTibyfwhA/viewform?usp=sf_link
THANK YOU!
|
|
| Author: | popsicle | | Posted: | Mar 8, 2024 21:36 | | Subject: | IWD, come and gone unremarked? | | Viewed: | 163 times | | Topic: | Off Topic | |
|
| Not even a sale, here where most every excuse for sales events has been used
Interesting...
|
| Author: | sasquatch_eater | | Posted: | Mar 8, 2024 13:56 | | Subject: | Missing legs? | | Viewed: | 107 times | | Topic: | Related Software | |
|
| I know that there is a dedicated Stud.io forum but it's just a quick question
to figure out whether I'm sane or not. Is it just me, or were there a
lot of Minifigure legs removed from the selection of pieces on Stud.io? I was
sure there used to be more but I could be wrong. One particular piece I was fairly
certain was there that no longer is is:
Has anyone else noticed this or am I just insane?
--Claude
|
|
| Author: | Saitobricks.ca | | Posted: | Mar 6, 2024 14:13 | | Subject: | Spring flash sale!! 95% off, are you ready? | | Viewed: | 183 times | | Topic: | Off Topic | |
|
| Guess what?!
Due to the overwhelming success of the test run we are moving the sale date to
March 10!!!
Still will be at 2:00A.M. to 3:00A.M.
And ALL items will be a guaranteed 95% OFF!!!!
No joke, but if you can’t wait, there will be a 50% sale March 7 starting at
9:00A.M. to 9:30A.M.!!!
SO DON’T MISS OUT!!!!
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
Japan, Hyōgo-ken
USA, Texas
United Kingdom, England
Canada, Ontario
)
)
)
)
)
)
)
)
)
France, Provence-Alpes-Côte d'Azur
Germany, Nordrhein-Westfalen
Austria, Steiermark
)
)
Greece, West Greece
)
)
)
)
Finland, Uusimaa
