Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | stranqe  | | Posted: | Mar 22, 2024 23:13 | | Subject: | Re: Question about set 40712 availabilty on BL | | Viewed: | 42 times | | Topic: | Off Topic | |
|
| In Off Topic, WILYKAT writes:
| |
I was just checking to see what's the average price, and there's a number
of sellers who has 50+ of this set somehow. The set was gift with purchase from
LEGO. Either someone placed multiple orders with LEGO to get 50+ sets or they
got it from another means.
Any idea how would someone get 50+ of 40712 sets legally?
|
those are all in china. rules are very different there. look at US only listings
its only 1-3 qty with one person having 10 as the most available.
|
 |
| Author: | WILYKAT | | Posted: | Mar 22, 2024 23:07 | | Subject: | Question about set 40712 availabilty on BL | | Viewed: | 153 times | | Topic: | Off Topic | |
|
|
I was just checking to see what's the average price, and there's a number
of sellers who has 50+ of this set somehow. The set was gift with purchase from
LEGO. Either someone placed multiple orders with LEGO to get 50+ sets or they
got it from another means.
Any idea how would someone get 50+ of 40712 sets legally?
|
|
| Author: | popsicle | | Posted: | Mar 22, 2024 19:36 | | Subject: | Re: That time of year! | | Viewed: | 53 times | | Topic: | Off Topic | |
|
| In Off Topic, Nubs_Select writes:
Stunning in person. They're everywhere in this area just now, a popular tree
for many up here. Short lived though, they'll have dropped their blossom
in a couple of weeks. After first shifting from brilliant pink to white.
|
| Author: | Nubs_Select | | Posted: | Mar 22, 2024 19:28 | | Subject: | Re: That time of year! | | Viewed: | 40 times | | Topic: | Off Topic | |
|
| | beautiful tree! |
|
| Author: | popsicle | | Posted: | Mar 22, 2024 19:26 | | Subject: | Re: That time of year! | | Viewed: | 56 times | | Topic: | Off Topic | |
|
| In Off Topic, wildchicken13 writes:
| | In Off Topic, popsicle writes:
| | Did you know...
Washington state is the top U.S. producer of apples, pears, and sweet cherries?
Especially the crops in and around our volcanoes, the Rainier and St. Helens
regions with that special volcanic soil. Washington produces more than 90% of
the nation's organic apple crop.
Seems every few homes have their trees blossoming just now. Makes for a wonderful
drive to the shore
And it's days like these that I miss having to pick up my daughter on campus.
I'd arrive early just to wait under the canopy of their famous Japanese imported
cherry trees.
My daughter's alma mater's live cam: https://www.youtube.com/watch?v=ECBJeRT-sy4
-Enjoy
|
Meanwhile in Chicago…
|
Hey, I know that roundabout! That's Al Capone Lane
Seriously though, looks like a nice neighborhood. Late spring, or even Summer
and Fall pics would be nice too
|
|
| Author: | wildchicken13 | | Posted: | Mar 22, 2024 18:55 | | Subject: | Re: That time of year! | | Viewed: | 50 times | | Topic: | Off Topic | |
|
| In Off Topic, popsicle writes:
| | Did you know...
Washington state is the top U.S. producer of apples, pears, and sweet cherries?
Especially the crops in and around our volcanoes, the Rainier and St. Helens
regions with that special volcanic soil. Washington produces more than 90% of
the nation's organic apple crop.
Seems every few homes have their trees blossoming just now. Makes for a wonderful
drive to the shore
And it's days like these that I miss having to pick up my daughter on campus.
I'd arrive early just to wait under the canopy of their famous Japanese imported
cherry trees.
My daughter's alma mater's live cam: https://www.youtube.com/watch?v=ECBJeRT-sy4
-Enjoy
|
Meanwhile in Chicago…
|
|
|
| Author: | popsicle | | Posted: | Mar 22, 2024 16:28 | | Subject: | Re: That time of year! | | Viewed: | 59 times | | Topic: | Off Topic | |
|
| In Off Topic, 1001bricks writes:
| | In Off Topic, popsicle writes:
Sincerely sorry for those poor people.
They don't know they're living one of their best time at this moment
|
Ain't that the truth, fellow old man
|
| Author: | 1001bricks | | Posted: | Mar 22, 2024 16:18 | | Subject: | Re: That time of year! | | Viewed: | 51 times | | Topic: | Off Topic | |
|
| In Off Topic, popsicle writes:
Sincerely sorry for those poor people.
They don't know they're living one of their best time at this moment
|
|
| Author: | popsicle | | Posted: | Mar 22, 2024 16:05 | | Subject: | That time of year! | | Viewed: | 214 times | | Topic: | Off Topic | |
|
| Did you know...
Washington state is the top U.S. producer of apples, pears, and sweet cherries?
Especially the crops in and around our volcanoes, the Rainier and St. Helens
regions with that special volcanic soil. Washington produces more than 90% of
the nation's organic apple crop.
Seems every few homes have their trees blossoming just now. Makes for a wonderful
drive to the shore
And it's days like these that I miss having to pick up my daughter on campus.
I'd arrive early just to wait under the canopy of their famous Japanese imported
cherry trees.
My daughter's alma mater's live cam: https://www.youtube.com/watch?v=ECBJeRT-sy4
-Enjoy
|
|
|
| Author: | Saitobricks.ca | | Posted: | Mar 21, 2024 11:21 | | Subject: | Re: Spring flash sale!! 95% off, are you ready? | | Viewed: | 27 times | | Topic: | Off Topic | |
|
| In Off Topic, Dhobeck writes:
| | In Off Topic, Saitobricks.ca writes:
| | In Off Topic, qwertyboy writes:
| | In Off Topic, Saitobricks.ca writes:
| | Don’t forget tonight at 2:00am to 3:00am the 95% off sale will be running.
My internet has been out since late Friday, and probably won’t be back up till
tomorrow minimum.(I’m using data)
But the sale will continue.
Happy buying tonight!
|
Thank you for honoring your sale, a man of his word!
Order placed for all the minifigs, sets, and various parts (so no need for local
pick-up after all).
Niek.
|
Well too bad for all the doubters that missed out 
Saved me some money
Thanks for posting that the sale did happen too.
|
Just a heads up you might want to update your store banner. Unless you’re doing
another sale
|
Thanks for the tip, that could have ended poorly.
|
|
| Author: | Dhobeck | | Posted: | Mar 21, 2024 11:05 | | Subject: | Re: Spring flash sale!! 95% off, are you ready? | | Viewed: | 25 times | | Topic: | Off Topic | |
|
| In Off Topic, Saitobricks.ca writes:
| | In Off Topic, qwertyboy writes:
| | In Off Topic, Saitobricks.ca writes:
| | Don’t forget tonight at 2:00am to 3:00am the 95% off sale will be running.
My internet has been out since late Friday, and probably won’t be back up till
tomorrow minimum.(I’m using data)
But the sale will continue.
Happy buying tonight!
|
Thank you for honoring your sale, a man of his word!
Order placed for all the minifigs, sets, and various parts (so no need for local
pick-up after all).
Niek.
|
Well too bad for all the doubters that missed out
Saved me some money
Thanks for posting that the sale did happen too.
|
Just a heads up you might want to update your store banner. Unless you’re doing
another sale
|
|
|
| Author: | Saitobricks.ca | | Posted: | Mar 21, 2024 07:51 | | Subject: | Re: Spring flash sale!! 95% off, are you ready? | | Viewed: | 60 times | | Topic: | Off Topic | |
|
| In Off Topic, qwertyboy writes:
| | In Off Topic, Saitobricks.ca writes:
| | Don’t forget tonight at 2:00am to 3:00am the 95% off sale will be running.
My internet has been out since late Friday, and probably won’t be back up till
tomorrow minimum.(I’m using data)
But the sale will continue.
Happy buying tonight!
|
Thank you for honoring your sale, a man of his word!
Order placed for all the minifigs, sets, and various parts (so no need for local
pick-up after all).
Niek.
|
Well too bad for all the doubters that missed out
Saved me some money
Thanks for posting that the sale did happen too.
|
|
| Author: | qwertyboy | | Posted: | Mar 21, 2024 02:11 | | Subject: | Re: Spring flash sale!! 95% off, are you ready? | | Viewed: | 40 times | | Topic: | Off Topic | |
|
| In Off Topic, Saitobricks.ca writes:
| | Don’t forget tonight at 2:00am to 3:00am the 95% off sale will be running.
My internet has been out since late Friday, and probably won’t be back up till
tomorrow minimum.(I’m using data)
But the sale will continue.
Happy buying tonight!
|
Thank you for honoring your sale, a man of his word!
Order placed for all the minifigs, sets, and various parts (so no need for local
pick-up after all).
Niek.
|
|
| Author: | Saitobricks.ca | | Posted: | Mar 20, 2024 16:03 | | Subject: | Re: Locked Thread? | | Viewed: | 41 times | | Topic: | Off Topic | |
|
| In Off Topic, DeLuca writes:
| | Did the Julius Caesar thread get locked for being political? I thought people
would be over that after almost two millennia!
|
TLG does not think so.
|
|
| Author: | Saitobricks.ca | | Posted: | Mar 20, 2024 15:15 | | Subject: | Re: Spring flash sale!! 95% off, are you ready? | | Viewed: | 38 times | | Topic: | Off Topic | |
|
| In Off Topic, PlanetEarthToys writes:
| | In Off Topic, Saitobricks.ca writes:
| | Don’t forget tonight at 2:00am to 3:00am the 95% off sale will be running.
My internet has been out since late Friday, and probably won’t be back up till
tomorrow minimum.(I’m using data)
But the sale will continue.
Happy buying tonight!
|
"Items do not fit in the package"
Max dimension: 38 cm x 27 cm x 2 cm
max thickness is 2cm
|
Will it work will a larger shipping method? The fig is still in the box, that
may be the issue.
|
|
| Author: | PlanetEarthToys | | Posted: | Mar 20, 2024 14:22 | | Subject: | Re: Spring flash sale!! 95% off, are you ready? | | Viewed: | 45 times | | Topic: | Off Topic | |
|
| In Off Topic, Saitobricks.ca writes:
| | Don’t forget tonight at 2:00am to 3:00am the 95% off sale will be running.
My internet has been out since late Friday, and probably won’t be back up till
tomorrow minimum.(I’m using data)
But the sale will continue.
Happy buying tonight!
|
"Items do not fit in the package"
Max dimension: 38 cm x 27 cm x 2 cm
max thickness is 2cm
|
|
|
| Author: | Saitobricks.ca | | Posted: | Mar 20, 2024 12:56 | | Subject: | Re: Spring flash sale!! 95% off, are you ready? | | Viewed: | 43 times | | Topic: | Off Topic | |
|
| Don’t forget tonight at 2:00am to 3:00am the 95% off sale will be running.
My internet has been out since late Friday, and probably won’t be back up till
tomorrow minimum.(I’m using data)
But the sale will continue.
Happy buying tonight!
|
|
| Author: | hpoort | | Posted: | Mar 17, 2024 04:12 | | Subject: | Re: Bug In Tires (ALL OF THEM) | | Viewed: | 66 times | | Topic: | Related Software | |
|
| In Technical Issues, csadn writes:
| | All Tires in Bricklink have the same problem now:
1) When mated to a Wheel, the tire always ends up on a corner of the "contact
patch" (the greenish box showing the size of the tire, rather than staying
on a side.
2) Any attempt to rotate the tire to a side results in all three rotation arrows
activating, and cause the entire model to rotate, regardless of which arrow is
used.
3) It is impossible to screenshot any of this, as any attempt to screenshot results
in the arrows being switched off.
This needs to be fixed yesterday.
|
You are on the wrong forum for this question as you are referring to Studio (the
3D modelling app), not Bricklink (the marketplace). See https://forum.bricklink.com
Most likely, you simply have turned the snap option off. This happens occasionally
to the best of people At the very least, at my end tires still do snap on
wheels. Also, this is a property of each part individually, so all wheel-tire
combinations failing at once is unlikely.
The symptoms you describe all match the turned off snap option. Objects not having
connected (1) always result in the rotation tool being shown instead of the hinge
tool (2) and as for screenshots (3), hitting the [PrintScreen] button should
capture the arrows as well.
Anyway, search the Studio forum.
|
|
| Author: | csadn | | Posted: | Mar 16, 2024 23:52 | | Subject: | Bug In Tires (ALL OF THEM) | | Viewed: | 184 times | | Topic: | Related Software | |
|
| All Tires in Bricklink have the same problem now:
1) When mated to a Wheel, the tire always ends up on a corner of the "contact
patch" (the greenish box showing the size of the tire, rather than staying
on a side.
2) Any attempt to rotate the tire to a side results in all three rotation arrows
activating, and cause the entire model to rotate, regardless of which arrow is
used.
3) It is impossible to screenshot any of this, as any attempt to screenshot results
in the arrows being switched off.
This needs to be fixed yesterday.
|
|
| Author: | SylvainLS | | Posted: | Mar 16, 2024 16:07 | | Subject: | Re: Set 76922-1 w parts unavailable in studio 2.0 | | Viewed: | 18 times | | Topic: | Related Software | |
|
| In Related Software, Palooka2 writes:
| | Hello. Can all the new parts that are part of set 76922-1 be added to studio
2.0? All of the new or stickered parts will not load on import of the set on
studio. I'm hoping this is not a time comsuming issue as i can go no further
with my builds without those parts being added. Thank you in advance.
|
Hi,
I see you found the dedicated forum for Studio 👍, I answered you there
|
|
| Author: | Palooka2 | | Posted: | Mar 16, 2024 14:48 | | Subject: | Set 76922-1 w parts unavailable in studio 2.0 | | Viewed: | 41 times | | Topic: | Related Software | |
|
| Hello. Can all the new parts that are part of set 76922-1 be added to studio
2.0? All of the new or stickered parts will not load on import of the set on
studio. I'm hoping this is not a time comsuming issue as i can go no further
with my builds without those parts being added. Thank you in advance.
|
| Author: | rickcraine | | Posted: | Mar 16, 2024 09:43 | | Subject: | Re: Moving pieces vertically in Studio | | Viewed: | 24 times | | Topic: | Related Software | |
|
| In Related Software, SylvainLS writes:
Thanks, don't mean to spam the forum, just usually don't build larger
things on Studio and am kinda overwhelmed
|
|
|
| Author: | rickcraine | | Posted: | Mar 16, 2024 09:32 | | Subject: | Moving pieces vertically in Studio | | Viewed: | 38 times | | Topic: | Related Software | |
|
| Is there any way you can move a piece (using a key or button or something) vertically
up or down in a model without having to drag and drop the piece out and up? I
am working on a large build and just had to replace some 6x8 plates with 6x10
so it threw my whole model off a little bit and am trying to fix it in the most
efficient way possible.
|
| Author: | DeLuca | | Posted: | Mar 16, 2024 03:25 | | Subject: | Re: (Cancelled) | | Viewed: | 31 times | | Topic: | Contests | |
|
| In Contests, CitralisPills writes:
Citralis is a “male enhancement” supplement. . . What are you trying to say about
us?? 🤔
|
| Author: | DeLuca | | Posted: | Mar 16, 2024 03:23 | | Subject: | Re: Calm Crest CBD Gummies Will Help You Reclaim | | Viewed: | 43 times | | Topic: | Off Topic | |
|
| |
| Author: | DeLuca | | Posted: | Mar 15, 2024 22:51 | | Subject: | Locked Thread? | | Viewed: | 102 times | | Topic: | Off Topic | |
|
| Did the Julius Caesar thread get locked for being political? I thought people
would be over that after almost two millennia!
|
|
| Author: | popsicle | | Posted: | Mar 15, 2024 21:08 | | Subject: | Re: Slaughtered by those close him. Ides of March | | Viewed: | 110 times | | Topic: | Off Topic | |
|
| In Off Topic, UTLF writes:
| | | | Stop being an appeaser. It's tiresome and more importantly, it's not a habit for you to personally adopt in life. Take and maintain a stand. Enough with the grin emoticons Express your thoughts succinctly or not at all...
|
Buy a diary to write in & your problem is solved
I'd rather see 100 emotes than read word salad every few days
|
I understand that simplicity for someone such as you gives you comfort. So maybe
rather than exercise any amount of thought, use the ignore feature available,
rather than reading those you don't wish to: https://www.bricklink.com/messageFilter.asp
|
|
|
| Author: | 1001bricks | | Posted: | Mar 15, 2024 20:58 | | Subject: | Re: Slaughtered by those close him. Ides of March | | Viewed: | 39 times | | Topic: | Off Topic | |
|
| |
|
| Author: | popsicle | | Posted: | Mar 15, 2024 20:58 | | Subject: | Re: Slaughtered by those close him. Ides of March | | Viewed: | 64 times | | Topic: | Off Topic | |
|
| In Off Topic, Nubs_Select writes:
| | | | Express your thoughts succinctly or not at all...
|
they say an image is a thousand words, and emojis are "images" people
use to speak with that are often better at "saying" something than words
are often able to do
|
Image, I agree. But not the convenient symbol of a simple emotion that's
used in place of thought
|
| Author: | Nubs_Select | | Posted: | Mar 15, 2024 20:54 | | Subject: | Re: Slaughtered by those close him. Ides of March | | Viewed: | 35 times | | Topic: | Off Topic | |
|
| In Off Topic, UTLF writes:
| | Mfw I login to the CBD gummy forum and see people talking about Lego
|
|
| Author: | Nubs_Select | | Posted: | Mar 15, 2024 20:48 | | Subject: | Re: Slaughtered by those close him. Ides of March | | Viewed: | 34 times | | Topic: | Off Topic | |
|
| |
|
| Author: | 1001bricks | | Posted: | Mar 15, 2024 20:38 | | Subject: | Re: Slaughtered by those close him. Ides of March | | Viewed: | 40 times | | Topic: | Off Topic | |
|
| In Off Topic, Nubs_Select writes:
| | | | Express your thoughts succinctly or not at all...
|
they say an image is a thousand words, and emojis are "images" people
use to speak with that are often better at "saying" something than words
are often able to do
|
|
|
| Author: | Nubs_Select | | Posted: | Mar 15, 2024 20:17 | | Subject: | Re: Slaughtered by those close him. Ides of March | | Viewed: | 47 times | | Topic: | Off Topic | |
|
| | | Express your thoughts succinctly or not at all...
|
they say an image is a thousand words, and emojis are "images" people
use to speak with that are often better at "saying" something than words
are often able to do
|
|
| Author: | popsicle | | Posted: | Mar 15, 2024 20:10 | | Subject: | Re: Slaughtered by those close him. Ides of March | | Viewed: | 57 times | | Topic: | Off Topic | |
|
| In Off Topic, The_Boyz_Bricks writes:
| | In Off Topic, Bond writes:
| | In Off Topic, popsicle writes:
| | What does that say about our nature?
Today on the anniversary of Julius Caesar's death, Ides of March. Consider
as they say, human nature being immutable or unchanging over time What then
can be gleaned on this day, 15th of March?
-popsicle
|
I would answer: If you know you've committed some egregious acts of late
against your friends, politely refuse their request when a dozen or so of them
invite you out to a late-nite party. Accept nothing - not even a pretzel - from
them for say, the rest of your natural life. Oh, and learn to love living a hermit's
existence, or move to a faraway and undisclosed location.
- Bond
|
|
Stop being an appeaser. It's tiresome and more importantly, it's not
a habit for you to personally adopt in life. Take and maintain a stand. Enough
with the grin emoticons Express your thoughts succinctly or not at all...
|
|
| Author: | popsicle | | Posted: | Mar 15, 2024 19:36 | | Subject: | Re: Slaughtered by those close him. Ides of March | | Viewed: | 67 times | | Topic: | Off Topic | |
|
| In Off Topic, Bond writes:
| | In Off Topic, popsicle writes:
| | But hurry, google away to try and catch up with reality and history. I'll
wait a bit.
|
I don't have to Google jack, holmes. If Shakespeare's tragedy is even
remotely accurate, then Caesar's sin was in forming a plan culminating in
forcing the Senate into declaring him as king of Rome, a title which (again according
to quasi-historical whispers), caused Romans to break out in hives.
|
What the, Shakespeare! Now, slowly lowering yourself back down to Earth
| |
Even if I'm utterly wrong - my strengths lie in English grammar and English
literature, not history - why on Earth would you want to come out swinging as
a provocative history snob? Surely there are more civil ways of tooting your horn?
|
"my strenghts lie in English grammar and English literature, not history"?
Now I understand your ludicrous statements, and your silliness
|
|
| Author: | Bond | | Posted: | Mar 15, 2024 19:22 | | Subject: | Re: Slaughtered by those close him. Ides of March | | Viewed: | 45 times | | Topic: | Off Topic | |
|
| In Off Topic, popsicle writes:
| | But hurry, google away to try and catch up with reality and history. I'll
wait a bit.
|
I don't have to Google jack, holmes. If Shakespeare's tragedy is even
remotely accurate, then Caesar's sin was in forming a plan culminating in
forcing the Senate into declaring him as king of Rome, a title which (again according
to quasi-historical whispers), caused Romans to break out in hives.
Even if I'm utterly wrong - my strengths lie in English grammar and English
literature, not history - why on Earth would you want to come out swinging as
a provocative history snob? Surely there are more civil ways of tooting your
horn?
|
|
| Author: | popsicle | | Posted: | Mar 15, 2024 19:10 | | Subject: | Re: Slaughtered by those close him. Ides of March | | Viewed: | 50 times | | Topic: | Off Topic | |
|
| In Off Topic, popsicle writes:
| | In Off Topic, Bond writes:
| | In Off Topic, popsicle writes:
| | What does that say about our nature?
Today on the anniversary of Julius Caesar's death, Ides of March. Consider
as they say, human nature being immutable or unchanging over time What then
can be gleaned on this day, 15th of March?
-popsicle
|
I would answer: If you know you've committed some egregious acts
|
"egregious acts against your friends?" Please, expand on these acts that
require wholesale slaughter (23 stab wounds) from your so called "friends"?
Very curious about this ludicrous attempt to negate our primal nature
|
But hurry, google away to try and catch up with reality and history. I'll
wait a bit.
| |
| | against your friends, politely refuse their request when a dozen or so of them
invite you out to a late-nite party. Accept nothing - not even a pretzel - from
them for say, the rest of your natural life. Oh, and learn to love living a hermit's
existence, or move to a faraway and undisclosed location.
- Bond
|
|
|
|
| Author: | popsicle | | Posted: | Mar 15, 2024 19:07 | | Subject: | Re: Slaughtered by those close him. Ides of March | | Viewed: | 35 times | | Topic: | Off Topic | |
|
| In Off Topic, 1001bricks writes:
| | In Off Topic, popsicle writes:
| | What does that say about our nature?
Today on the anniversary of Julius Caesar's death, Ides of March. Consider
as they say, human nature being immutable or unchanging over time What then
can be gleaned on this day, 15th of March?
|
World Consumer Rights Day as per JFK?
aka: Insurance is for the Seller, not the Buyer
|
Very good, beautiful Sylvain
|
|
| Author: | popsicle | | Posted: | Mar 15, 2024 19:05 | | Subject: | Re: Slaughtered by those close him. Ides of March | | Viewed: | 70 times | | Topic: | Off Topic | |
|
| In Off Topic, Bond writes:
| | In Off Topic, popsicle writes:
| | What does that say about our nature?
Today on the anniversary of Julius Caesar's death, Ides of March. Consider
as they say, human nature being immutable or unchanging over time What then
can be gleaned on this day, 15th of March?
-popsicle
|
I would answer: If you know you've committed some egregious acts
|
"egregious acts against your friends?" Please, expand on these acts that
require wholesale slaughter (23 stab wounds) from your so called "friends"?
Very curious about this ludicrous attempt to negate our primal nature
| | against your friends, politely refuse their request when a dozen or so of them
invite you out to a late-nite party. Accept nothing - not even a pretzel - from
them for say, the rest of your natural life. Oh, and learn to love living a hermit's
existence, or move to a faraway and undisclosed location.
- Bond
|
|
|
| Author: | The_Boyz_Bricks | | Posted: | Mar 15, 2024 18:52 | | Subject: | Re: Slaughtered by those close him. Ides of March | | Viewed: | 41 times | | Topic: | Off Topic | |
|
| In Off Topic, Bond writes:
| | In Off Topic, popsicle writes:
| | What does that say about our nature?
Today on the anniversary of Julius Caesar's death, Ides of March. Consider
as they say, human nature being immutable or unchanging over time What then
can be gleaned on this day, 15th of March?
-popsicle
|
I would answer: If you know you've committed some egregious acts of late
against your friends, politely refuse their request when a dozen or so of them
invite you out to a late-nite party. Accept nothing - not even a pretzel - from
them for say, the rest of your natural life. Oh, and learn to love living a hermit's
existence, or move to a faraway and undisclosed location.
- Bond
|
|
|
| Author: | Bond | | Posted: | Mar 15, 2024 18:50 | | Subject: | Re: Slaughtered by those close him. Ides of March | | Viewed: | 54 times | | Topic: | Off Topic | |
|
| In Off Topic, popsicle writes:
| | What does that say about our nature?
Today on the anniversary of Julius Caesar's death, Ides of March. Consider
as they say, human nature being immutable or unchanging over time What then
can be gleaned on this day, 15th of March?
-popsicle
|
I would answer: If you know you've committed some egregious acts of late
against your friends, politely refuse their request when a dozen or so of them
invite you out to a late-nite party. Accept nothing - not even a pretzel - from
them for say, the rest of your natural life. Oh, and learn to love living a hermit's
existence, or move to a faraway and undisclosed location.
- Bond
|
|
| Author: | 1001bricks | | Posted: | Mar 15, 2024 18:32 | | Subject: | Re: Slaughtered by those close him. Ides of March | | Viewed: | 45 times | | Topic: | Off Topic | |
|
| In Off Topic, popsicle writes:
| | What does that say about our nature?
Today on the anniversary of Julius Caesar's death, Ides of March. Consider
as they say, human nature being immutable or unchanging over time What then
can be gleaned on this day, 15th of March?
|
World Consumer Rights Day as per JFK?
aka: Insurance is for the Seller, not the Buyer
|
|
| Author: | popsicle | | Posted: | Mar 15, 2024 18:21 | | Subject: | Slaughtered by those close him. Ides of March | | Viewed: | 418 times | | Topic: | Off Topic | |
|
| What does that say about our nature?
Today on the anniversary of Julius Caesar's death, Ides of March. Consider
as they say, human nature being immutable or unchanging over time What then
can be gleaned on this day, 15th of March?
-popsicle
|
| Author: | Saitobricks.ca | | Posted: | Mar 15, 2024 11:36 | | Subject: | Re: IWD, come and gone unremarked? | | Viewed: | 30 times | | Topic: | Off Topic | |
|
| In Off Topic, wildchicken13 writes:
| | In Off Topic, Saitobricks.ca writes:
I'm talking about chicks
|
|
| Author: | wildchicken13 | | Posted: | Mar 14, 2024 21:32 | | Subject: | Re: IWD, come and gone unremarked? | | Viewed: | 37 times | | Topic: | Off Topic | |
|
| In Off Topic, Saitobricks.ca writes:
I'm talking about chicks
|
| Author: | 1001bricks | | Posted: | Mar 14, 2024 19:17 | | Subject: | Re: Special day | | Viewed: | 31 times | | Topic: | Off Topic | |
|
| In Off Topic, legoman77 writes:
Missed it! Already 15th here
Happy to see you here John!
Feat eating a pie?
|
| Author: | Nubs_Select | | Posted: | Mar 14, 2024 19:10 | | Subject: | Re: a better day | | Viewed: | 33 times | | Topic: | Off Topic | |
|
| |
|
|
|
| Author: | 1001bricks | | Posted: | Mar 14, 2024 12:40 | | Subject: | Re: Studio Error from Printed Brick Import (.ldr) | | Viewed: | 21 times | | Topic: | Related Software | |
|
| In Related Software, Brickwilbo writes:
| | In Related Software, tprahm writes:
| | When I import a .ldr file into BrickLink, all of the bricks are placed perfectly
sound, except for printed bricks. Even when the .dat item ID matches, in this
case (3069p02.dat), it still doesn't convert the file type to the actual
brick. Even if the brick exists in Bricklink, such as the 3069p02 piece, it won't
budge unless I manually change it. However, I also noticed that occasionally,
but not with this example, bricks such as 3068pb0191 will appear ONLY IF I change
the .dat file name from "3068pb0191" to "3068bpb0191". However,
I would like all of the bricks to be recognized in the Studio software. Any ideas?
And no, manual brick switches are not an option here.
|
The Stud.io related Forum is here: https://forum.bricklink.com/
Helppage: https://studiohelp.bricklink.com/hc/en-us
|
AH, and it's Studio dear, not anymore stud.io
|
|
| Author: | Brickwilbo | | Posted: | Mar 14, 2024 02:39 | | Subject: | Re: Studio Error from Printed Brick Import (.ldr) | | Viewed: | 19 times | | Topic: | Related Software | |
|
| In Related Software, tprahm writes:
| | When I import a .ldr file into BrickLink, all of the bricks are placed perfectly
sound, except for printed bricks. Even when the .dat item ID matches, in this
case (3069p02.dat), it still doesn't convert the file type to the actual
brick. Even if the brick exists in Bricklink, such as the 3069p02 piece, it won't
budge unless I manually change it. However, I also noticed that occasionally,
but not with this example, bricks such as 3068pb0191 will appear ONLY IF I change
the .dat file name from "3068pb0191" to "3068bpb0191". However,
I would like all of the bricks to be recognized in the Studio software. Any ideas?
And no, manual brick switches are not an option here.
|
The Stud.io related Forum is here: https://forum.bricklink.com/
Helppage: https://studiohelp.bricklink.com/hc/en-us
|
|
| Author: | tprahm | | Posted: | Mar 13, 2024 23:39 | | Subject: | Studio Error from Printed Brick Import (.ldr) | | Viewed: | 55 times | | Topic: | Related Software | |
|
| When I import a .ldr file into BrickLink, all of the bricks are placed perfectly
sound, except for printed bricks. Even when the .dat item ID matches, in this
case (3069p02.dat), it still doesn't convert the file type to the actual
brick. Even if the brick exists in Bricklink, such as the 3069p02 piece, it won't
budge unless I manually change it. However, I also noticed that occasionally,
but not with this example, bricks such as 3068pb0191 will appear ONLY IF I change
the .dat file name from "3068pb0191" to "3068bpb0191". However,
I would like all of the bricks to be recognized in the Studio software. Any ideas?
And no, manual brick switches are not an option here.
|
|
|
| Author: | SylvainLS | | Posted: | Mar 11, 2024 16:24 | | Subject: | Re: Issue on the collada export. | | Viewed: | 29 times | | Topic: | Related Software | |
|
| In Related Software, DelusionB writes:
| | Hello I am trying to export COLLADA files from Studio 2.0, to import them on
3dsmax and I have this issue.
Some of the bricks are not on the correct position, they seem to have lots of
gaps.
I have been dealing with this problem since the past year, and I hoped it will
be fixed by now, but unfortunately, it remain unsolved.
Could you please advise on this matter?
|
Hi,
First, the dedicated forum for Studio and PartDesigner is https://forum.bricklink.com/
(hover over the red Studio icon on every page, then click “Studio Forum”).
You can search the forum for your question before posting a new one (the search
box is in the very dark grey banner).
There’s also indexes of known bugs and suggestions that you can browse first:
Studio: https://forum.bricklink.com/viewtopic.php?f=4&t=5579
PartDesigner: https://forum.bricklink.com/viewtopic.php?f=10&t=5589
Then, there’s been a few bugs with the COLLADA export but, AFAIK, they have almost
all been fixed.
One thing that may happen though is a problem with submodels: it seems the submodels’
positions are not always understood (by Blender for instance).
The main thread is here: https://forum.bricklink.com/viewtopic.php?f=4&t=6159
(And people alluded to it a couple times… but without specifics.)
So I would first try to release all the submodels before exporting.
Anyway, note that the COLLADA format doesn’t pose any problem to Eyesight (it’s
the same as the DAE sent to Eyesight, the Photorealistic renderer, based on Blender’s
Cycles).
Also, as you can see, the afore mentioned thread is short and has had no follow-up,
so I’m not sure it has been fixed and came back (doesn’t seem so but I don’t
have all the infos on the bugs) but what I’m certain of is that no one bumped
it.
I’m not saying that bugs always need to be bumped to be solved but it sure helps
to know people are interested in seeing them fixed
|
|
| Author: | DelusionB | | Posted: | Mar 11, 2024 15:42 | | Subject: | Issue on the collada export. | | Viewed: | 73 times | | Topic: | Related Software | |
|
| Hello I am trying to export COLLADA files from Studio 2.0, to import them on
3dsmax and I have this issue.
Some of the bricks are not on the correct position, they seem to have lots of
gaps.
I have been dealing with this problem since the past year, and I hoped it will
be fixed by now, but unfortunately, it remain unsolved.
Could you please advise on this matter?
|
|
| Author: | Saitobricks.ca | | Posted: | Mar 11, 2024 15:01 | | Subject: | Re: Is there a way make minifigs in studio? | | Viewed: | 25 times | | Topic: | Related Software | |
|
| In Related Software, SylvainLS writes:
Thanks!
|
|
|
| Author: | Saitobricks.ca | | Posted: | Mar 11, 2024 14:41 | | Subject: | Is there a way make minifigs in studio? | | Viewed: | 52 times | | Topic: | Related Software | |
|
| Trying to make a random fig in studio, but any accessories or heads that go on
the torso won't go on without a fight.
I got the neck accessory on after about a halfhour of fighting, but now the head
won't go on.
I position it so it looks like it's on but as soon as I unselect it grays
out.
|
|
| Author: | Saitobricks.ca | | Posted: | Mar 11, 2024 12:09 | | Subject: | Re: IWD, come and gone unremarked? | | Viewed: | 37 times | | Topic: | Off Topic | |
|
| In Off Topic, wildchicken13 writes:
| | In Off Topic, Saitobricks.ca writes:
| | What are you talking about?
|
I admit that International Women's Day came and went this year without my
notice, but rest assured without fail I notice the women themselves.
|
Don’t you mean hens?
|
| Author: | Saitobricks.ca | | Posted: | Mar 11, 2024 11:29 | | Subject: | Re: IWD, come and gone unremarked? | | Viewed: | 34 times | | Topic: | Off Topic | |
|
| In Off Topic, UTLF writes:
| | I actually made sure to raise the price of everything in my store by 13% in celebration
of International Women's Day
|
We all forgot about international pizza day too, and eating is very important.
|
|
| Author: | Saitobricks.ca | | Posted: | Mar 10, 2024 17:35 | | Subject: | Re: Studio, first thoughts and experience | | Viewed: | 39 times | | Topic: | Related Software | |
|
| In Related Software, Andrsv writes:
| | In Related Software, Saitobricks.ca writes:
| | Just downloaded studio yesterday, and tried it out.
First model turned out good, was very surprised at how easy it was to use.
|
Cool car
|
My younger brother built it about a year ago.
This is the 4th revision.
I just wanted to test the ability of studio, so I used this as a test.
Was very pleased with the results.
|
|
| Author: | Andrsv | | Posted: | Mar 10, 2024 17:06 | | Subject: | Re: Studio, first thoughts and experience | | Viewed: | 34 times | | Topic: | Related Software | |
|
| In Related Software, Saitobricks.ca writes:
| | Just downloaded studio yesterday, and tried it out.
First model turned out good, was very surprised at how easy it was to use.
|
Cool car
|
| Author: | Saitobricks.ca | | Posted: | Mar 10, 2024 16:54 | | Subject: | Studio, first thoughts and experience | | Viewed: | 81 times | | Topic: | Related Software | |
|
| Just downloaded studio yesterday, and tried it out.
First model turned out good, was very surprised at how easy it was to use.
|
|
| Author: | DeLuca | | Posted: | Mar 10, 2024 15:25 | | Subject: | Re: IWD, come and gone unremarked? | | Viewed: | 41 times | | Topic: | Off Topic | |
|
| In Off Topic, UTLF writes:
| | I actually made sure to raise the price of everything in my store by 13% in celebration
of International Women's Day
|
|
| Author: | 1001bricks | | Posted: | Mar 10, 2024 13:58 | | Subject: | Re: IWD, come and gone unremarked? | | Viewed: | 39 times | | Topic: | Off Topic | |
|
| In Off Topic, wildchicken13 writes:
| | I admit that International Women's Day came and went this year without my
notice, but rest assured without fail I notice the women themselves.
|
Scientifical approach is always the best. Keep on!
|
|
| Author: | tlubionicle | | Posted: | Mar 10, 2024 13:27 | | Subject: | QUIZ FOR MY THESIS. THIS IS LEGO RELATED. | | Viewed: | 113 times | | Topic: | Off Topic | |
|
| Hey fellow LEGO enthusiasts!
Theres link below to my Bionicle quiz. (made with google Forum). I centered it
around our beloved Bionicle universe! As part of my research Im doing for my
uni, I designed a super fun and challenging Bionicle quiz, and I thought I'd
share it with you all because who doesn't love a good quiz, especially when
it's about Bionicle, right?
You don't need to be a bionicle fan to do this! : D
https://docs.google.com/forms/d/e/1FAIpQLScXdKkBt9NWJ8ZMR9XdUtNvSmq3CaC5iBj-aP7gDVTibyfwhA/viewform?usp=sf_link
THANK YOU!
|
|
| Author: | wildchicken13 | | Posted: | Mar 9, 2024 22:27 | | Subject: | Re: IWD, come and gone unremarked? | | Viewed: | 51 times | | Topic: | Off Topic | |
|
| In Off Topic, Saitobricks.ca writes:
| | What are you talking about?
|
International Women's Day (March 8th)
Normally, such a holiday would trigger a flurry of sales posts from sellers trying
to capitalize on the celebration, but alas, there was no such frenzy.
Perhaps the new limit of one sale post per month is preventing sellers from running
(or announcing) such holiday sales? https://www.bricklink.com/message.asp?ID=1437060
At least one seller has decided to run a "March sale", grouping some
of the month's major holidays (International Women's Day, Ramadan, and
Saint Patrick's Day) into one: https://www.bricklink.com/message.asp?ID=1458584
I admit that International Women's Day came and went this year without my
notice, but rest assured without fail I notice the women themselves.
|
|
| Author: | wildchicken13 | | Posted: | Mar 9, 2024 22:12 | | Subject: | Re: IWD, come and gone unremarked? | | Viewed: | 50 times | | Topic: | Off Topic | |
|
| In Off Topic, popsicle writes:
| | I've faith you'll work it out on your own...
|
I'm not so sure; you may need to "mansplain" this one
|
| Author: | popsicle | | Posted: | Mar 9, 2024 21:11 | | Subject: | Re: IWD, come and gone unremarked? | | Viewed: | 54 times | | Topic: | Off Topic | |
|
| In Off Topic, Saitobricks.ca writes:
| | In Off Topic, popsicle writes:
| | Not even a sale, here where most every excuse for sales events has been used
Interesting...
|
What are you talking about?
|
I've faith you'll work it out on your own...
|
|
| Author: | 1001bricks | | Posted: | Mar 9, 2024 14:53 | | Subject: | Re: Help! Can't find Dolphin Part 33499pb01 | | Viewed: | 37 times | | Topic: | Related Software | |
|
| In Related Software, SylvainLS writes:
| | In Related Software, 1001bricks writes:
| | […]
Yep, just tried, especially with the SHIFT/CTRL way, nice!
|
Alt works too: 1LDU.
It was added after the writing.
And for Rotation too: Alt+arrow = 0.1°.
| | | | And I don’t care about your curse: my phone rarely goes into my bedroom  )
|
May your wife keeps pulling the bedding off you at night!
|
I’m single
|
You'll find someone!
After all, human beings survived down under the oceans, in space, on the moon,
so it should be (a bit) easier...
|
|
| Author: | SylvainLS | | Posted: | Mar 9, 2024 14:35 | | Subject: | Re: Help! Can't find Dolphin Part 33499pb01 | | Viewed: | 31 times | | Topic: | Related Software | |
|
| In Related Software, 1001bricks writes:
| | […]
Yep, just tried, especially with the SHIFT/CTRL way, nice!
|
Alt works too: 1LDU.
It was added after the writing.
And for Rotation too: Alt+arrow = 0.1°.
| | | | And I don’t care about your curse: my phone rarely goes into my bedroom )
|
May your wife keeps pulling the bedding off you at night!
|
I’m single
|
|
| Author: | Saitobricks.ca | | Posted: | Mar 9, 2024 14:22 | | Subject: | Re: Help! Can't find Dolphin Part 33499pb01 | | Viewed: | 23 times | | Topic: | Related Software | |
|
| In Related Software, SylvainLS writes:
| | In Related Software, 1001bricks writes:
| | […]
I use LeoCAD for huge building, for those bent parts, or more often for placing
things Studio refuse to, while legit and constructible of course...
|
I never¹ get it when someone says that. Studio allows you to place anything
anywhere, in an easier way than LeoCAD.
——
¹ Well, yes, I get it: they never read the help pages https://studiohelp.bricklink.com/hc/en-us/articles/5411126626199-Translation-tool
And I don’t care about your curse:
|
Reminds me of the guy on the one lego mini movie, "I don't care for curses,
no I don't really care"
| | my phone rarely goes into my bedroom )
|
Wow, you must sleep good at night.
|
|
| Author: | 1001bricks | | Posted: | Mar 9, 2024 14:19 | | Subject: | Re: Help! Can't find Dolphin Part 33499pb01 | | Viewed: | 23 times | | Topic: | Related Software | |
|
| In Related Software, SylvainLS writes:
| | In Related Software, 1001bricks writes:
| | […]
I use LeoCAD for huge building, for those bent parts, or more often for placing
things Studio refuse to, while legit and constructible of course...
|
I never¹ get it when someone says that. Studio allows you to place anything
anywhere, in an easier way than LeoCAD.
|
Yep, just tried, especially with the SHIFT/CTRL way, nice!
| | And I don’t care about your curse: my phone rarely goes into my bedroom )
|
May your wife keeps pulling the bedding off you at night!
|
|
| Author: | SylvainLS | | Posted: | Mar 9, 2024 14:07 | | Subject: | Re: Help! Can't find Dolphin Part 33499pb01 | | Viewed: | 18 times | | Topic: | Related Software | |
|
| In Related Software, 1001bricks writes:
| | […]
I use LeoCAD for huge building, for those bent parts, or more often for placing
things Studio refuse to, while legit and constructible of course...
|
I never¹ get it when someone says that. Studio allows you to place anything
anywhere, in an easier way than LeoCAD.
——
¹ Well, yes, I get it: they never read the help pages https://studiohelp.bricklink.com/hc/en-us/articles/5411126626199-Translation-tool
And I don’t care about your curse: my phone rarely goes into my bedroom )
|
|
| Author: | 1001bricks | | Posted: | Mar 9, 2024 13:57 | | Subject: | Re: Help! Can't find Dolphin Part 33499pb01 | | Viewed: | 27 times | | Topic: | Related Software | |
|
| In Related Software, SylvainLS writes:
| | What?! You never read the fine help pages?! You didn’t try the buttons or wonder
about the squiggles in the Building palette?!
|
I wish your smartphone to fall on you eye in your bed!
| | | | and yes for the noodle aspect, I'll try to get a correct
result...
|
Patience and tests….
|
I tried, good for simple short shapes.
| | | | I said it upper; you import or create the ldraw file in LeoCAD, there you can
bend it nicely (no noodle), then export as .obj, then import in PD, then studio...
|
Yeah, and that’s a lot of steps.
|
Apart the time to bend the hose how you wish, it takes an extra 30 seconds, bof.
I use LeoCAD for huge building, for those bent parts, or more often for placing
things Studio refuse to, while legit and constructible of course...
| | | | I'll try with studio, but with LeoCad you can do very nice curves adding
as many "handles" (don't remind the term) to make as many curve points
you wish...
|
I wish they would all sit around a table and decide of a common, simple and modern
way to do it….
|
Yep, just like the BrickLink we wish.
But then one in the Forum will say "We need a MOC Shop" (or such idea)
|
|
| Author: | SylvainLS | | Posted: | Mar 9, 2024 12:58 | | Subject: | Re: Help! Can't find Dolphin Part 33499pb01 | | Viewed: | 22 times | | Topic: | Related Software | |
|
| In Related Software, 1001bricks writes:
What?! You never read the fine help pages?! You didn’t try the buttons or wonder
about the squiggles in the Building palette?!
To paraphrase a frequent poster here: “you need to read the help pages twice
before starting a s̶t̶o̶r̶e̶ design!”
| | and yes for the noodle aspect, I'll try to get a correct
result...
|
Patience and tests….
| | […]
I said it upper; you import or create the ldraw file in LeoCAD, there you can
bend it nicely (no noodle), then export as .obj, then import in PD, then studio...
|
Yeah, and that’s a lot of steps.
But as your “bug report” started with importing the LDraw file….
| | I'll try with studio, but with LeoCad you can do very nice curves adding
as many "handles" (don't remind the term) to make as many curve points
you wish...
|
I wish they would all sit around a table and decide of a common, simple and modern
way to do it….
|
|
| Author: | 1001bricks | | Posted: | Mar 9, 2024 12:21 | | Subject: | Re: Help! Can't find Dolphin Part 33499pb01 | | Viewed: | 31 times | | Topic: | Related Software | |
|
| In Related Software, SylvainLS writes:
| | | | | | (More seriously though, I don’t really see how importing the straight LDraw part
helps to have it flexed in Studio 🤔)
|
No, I meant to make this I bend it in Leocad, then import it bent through Part
Designer in Studio. It's the way I know though, maybe there's easier?
|
“Studio can flex it” = https://studiohelp.bricklink.com/hc/en-us/articles/6481921905303-Flexible-parts
“…hahaha” = the part actually becomes an overcooked noodle, it’s stretched, and
it goes every which way but the one you want.
|
Did'nt know, and yes for the noodle aspect, I'll try to get a correct
result...
| | So, no, you can’t import an LDraw file with flexed parts made in LeoCAD. You
indeed need to go through another format to force LeoCAD to write the triangles
of the part when flexed, and then use PartDesigner.
|
I said it upper; you import or create the ldraw file in LeoCAD, there you can
bend it nicely (no noodle), then export as .obj, then import in PD, then studio...
I'll try with studio, but with LeoCad you can do very nice curves adding
as many "handles" (don't remind the term) to make as many curve points
you wish...
Thanks for the infos!
|
|
| Author: | SylvainLS | | Posted: | Mar 9, 2024 11:57 | | Subject: | Re: Help! Can't find Dolphin Part 33499pb01 | | Viewed: | 33 times | | Topic: | Related Software | |
|
| In Related Software, 1001bricks writes:
| | In Related Software, SylvainLS writes:
| | In Related Software, 1001bricks writes:
| | […]
| | Or just directly use the part that’s in Studio, no?
|
"depending what's your doing": example, wanting a bent Hose in your
Studio model...
|
Well, Studio can flex it…
… hahaha.
(More seriously though, I don’t really see how importing the straight LDraw part
helps to have it flexed in Studio 🤔)
|
No, I meant to make this I bend it in Leocad, then import it bent through Part
Designer in Studio. It's the way I know though, maybe there's easier?
|
“Studio can flex it” = https://studiohelp.bricklink.com/hc/en-us/articles/6481921905303-Flexible-parts
“…hahaha” = the part actually becomes an overcooked noodle, it’s stretched, and
it goes every which way but the one you want.
“importing the straight LDraw part” = if the hose is XX and you import a file
that just uses XX.dat, then you’re importing the unflexed part. And, AFAICT,
LeoCAD doesn’t bend parts in its LDraw files. It uses the part (XX.dat) and
adds a comment to tell itself how to bend the part when it will reload it. That
comment is obviously not interpreted by PartDesigner or Studio (or LDView or
other LDraw tools).
So, no, you can’t import an LDraw file with flexed parts made in LeoCAD. You
indeed need to go through another format to force LeoCAD to write the triangles
of the part when flexed, and then use PartDesigner.
(
I think something similar happens with LDCad, but with its own syntax of course.
LSynth ‘correctly’ uses subparts to make the flexed parts… but then it has
no UI. And so you can keep everything in the LDraw format. But you also end
up with multiple (sub)parts and no relation to the BrickLink part… so you generally
also go through PartDesigner to add that.
IINM, MLCad uses LSynth.
For LDD, you can use lxf2ldr(.html), my converter(s), that generates() LSynth
commands (so you need LSynth too).
)
|
|
| Author: | 1001bricks | | Posted: | Mar 9, 2024 11:25 | | Subject: | Re: Help! Can't find Dolphin Part 33499pb01 | | Viewed: | 25 times | | Topic: | Related Software | |
|
| In Related Software, SylvainLS writes:
| | In Related Software, 1001bricks writes:
| | […]
| | Or just directly use the part that’s in Studio, no?
|
"depending what's your doing": example, wanting a bent Hose in your
Studio model...
|
Well, Studio can flex it…
… hahaha.
(More seriously though, I don’t really see how importing the straight LDraw part
helps to have it flexed in Studio 🤔)
|
No, I meant to make this I bend it in Leocad, then import it bent through Part
Designer in Studio. It's the way I know though, maybe there's easier?
|
|
| Author: | SylvainLS | | Posted: | Mar 9, 2024 04:02 | | Subject: | Re: Help! Can't find Dolphin Part 33499pb01 | | Viewed: | 32 times | | Topic: | Related Software | |
|
| In Related Software, 1001bricks writes:
| | […]
| | Or just directly use the part that’s in Studio, no?
|
"depending what's your doing": example, wanting a bent Hose in your
Studio model...
|
Well, Studio can flex it…
… hahaha.
(More seriously though, I don’t really see how importing the straight LDraw part
helps to have it flexed in Studio 🤔)
| | | | I’ll keep that bug “under my elbow” and throw it at the devs when they don’t
expect it, mwahaha!
|
Diabolic!!! Thanks!
|
https://www.imdb.com/title/tt0062861/
|
|
| Author: | Saitobricks.ca | | Posted: | Mar 8, 2024 21:43 | | Subject: | Re: IWD, come and gone unremarked? | | Viewed: | 46 times | | Topic: | Off Topic | |
|
| In Off Topic, popsicle writes:
| | Not even a sale, here where most every excuse for sales events has been used
Interesting...
|
What are you talking about?
|
| Author: | popsicle | | Posted: | Mar 8, 2024 21:36 | | Subject: | IWD, come and gone unremarked? | | Viewed: | 163 times | | Topic: | Off Topic | |
|
| Not even a sale, here where most every excuse for sales events has been used
Interesting...
|
|
| Author: | 1001bricks | | Posted: | Mar 8, 2024 18:02 | | Subject: | Re: Help! Can't find Dolphin Part 33499pb01 | | Viewed: | 34 times | | Topic: | Related Software | |
|
| In Related Software, SylvainLS writes:
| | In Related Software, 1001bricks writes:
| | […]
| | BTW, I just spent an hour on this, if you import an lDraw file containing a Hose
rigid 3mm in PartDesigner, then when you export to Studio it shows an "empty"
(void) part.
Same if directly importing a Hose rigid 3mm in PD and Export it to Studio.
|
|
Hmm, it must be because the part is flexible in Studio. But that’s weird.
The exported part simply says “use XX.dat,” where XX.dat is the 3D model for
the hose. So Studio sees it the same way as the flexible part… well, I’m not
clear on why that prevents Studio from showing it but that’s the only lead I
have
| | | | The only way it works is:
* create or import the lDraw in Leocad,
* export as Wavefront (.obj),
* import in PD,
* export to Studio.
|
|
In that case, you’re exporting a new 3D model, not linked to the part’s (file)name.
So Studio doesn’t have it in its database.
Maybe it could also work if you simply fed PD the XX.dat of the part but under
another filename.
(Studio doesn’t have the subparts/primitives u9053.dat (end) and 77.dat (hose
section) as parts and even less as flexible parts, so there should be no need
to do the rename dance further down the hierarchy.)
| | Or, depending what's your doing, simply opening the lDraw in Studio, copy
this part(s) and past if (them) in Studio.
|
Or just directly use the part that’s in Studio, no?
|
"depending what's your doing": example, wanting a bent Hose in your
Studio model...
| | I’ll keep that bug “under my elbow” and throw it at the devs when they don’t
expect it, mwahaha!
|
Diabolic!!! Thanks!
|
|
|
| Author: | sasquatch_eater | | Posted: | Mar 8, 2024 16:58 | | Subject: | Re: Missing legs? | | Viewed: | 26 times | | Topic: | Related Software | |
|
| In Related Software, SylvainLS writes:
| | In Related Software, sasquatch_eater writes:
| | […]
But what about the other regular minifigure legs? Were there any that were removed?
It seems to me like the amount on Stud.io is less than it used to be.
|
I don’t think so: Studio never removes parts just for the fun of it But I
also haven’t memorized all the decorated parts.
Oh, I just remembered I have a file with all the minifig parts for BDP4… and
they are still there.
So maybe you’re remembering wrong or you’re filtering by colour or in the wrong
palette.
See the help page: https://studiohelp.bricklink.com/hc/en-us/articles/8117942037911-Missing-parts
or the Parts FAQ https://forum.bricklink.com/viewtopic.php?f=6&t=6368 for more
info about that.
|
I was probably just remembering wrong. Thanks!
|
|
| Author: | SylvainLS | | Posted: | Mar 8, 2024 16:52 | | Subject: | Re: Missing legs? | | Viewed: | 28 times | | Topic: | Related Software | |
|
| In Related Software, sasquatch_eater writes:
| | […]
But what about the other regular minifigure legs? Were there any that were removed?
It seems to me like the amount on Stud.io is less than it used to be.
|
I don’t think so: Studio never removes parts just for the fun of it But I
also haven’t memorized all the decorated parts.
Oh, I just remembered I have a file with all the minifig parts for BDP4… and
they are still there.
So maybe you’re remembering wrong or you’re filtering by colour or in the wrong
palette.
See the help page: https://studiohelp.bricklink.com/hc/en-us/articles/8117942037911-Missing-parts
or the Parts FAQ https://forum.bricklink.com/viewtopic.php?f=6&t=6368 for more
info about that.
|
|
| Author: | sasquatch_eater | | Posted: | Mar 8, 2024 16:44 | | Subject: | Re: Missing legs? | | Viewed: | 29 times | | Topic: | Related Software | |
|
| In Related Software, SylvainLS writes:
| | In Related Software, sasquatch_eater writes:
| | I know that there is a dedicated Stud.io forum but it's just a quick question
to figure out whether I'm sane or not. Is it just me, or were there a
lot of Minifigure legs removed from the selection of pieces on Stud.io? I was
sure there used to be more but I could be wrong. One particular piece I was fairly
certain was there that no longer is is:
Has anyone else noticed this or am I just insane?
|
Well, the Faun/Animal legs aren’t in Studio now and they weren’t there as of
a few months ago.
There were ugly converted-from-LDD 3D models and those were cleaned and made
official in LDraw 23-02, but I don’t think they have had time to make it into
Studio, and, anyway, they are the plain versions, there’s no decorated version
in LDraw.
|
But what about the other regular minifigure legs? Were there any that were removed?
It seems to me like the amount on Stud.io is less than it used to be.
|
|
| Author: | SylvainLS | | Posted: | Mar 8, 2024 16:08 | | Subject: | Re: Help! Can't find Dolphin Part 33499pb01 | | Viewed: | 29 times | | Topic: | Related Software | |
|
| In Related Software, SylvainLS writes:
| | […]
Maybe it could also work if you simply fed PD the XX.dat of the part but under
another filename. […]
|
Yep. That works.
|
|
| Author: | SylvainLS | | Posted: | Mar 8, 2024 16:00 | | Subject: | Re: Help! Can't find Dolphin Part 33499pb01 | | Viewed: | 28 times | | Topic: | Related Software | |
|
| In Related Software, 1001bricks writes:
| | […]
| | BTW, I just spent an hour on this, if you import an lDraw file containing a Hose
rigid 3mm in PartDesigner, then when you export to Studio it shows an "empty"
(void) part.
Same if directly importing a Hose rigid 3mm in PD and Export it to Studio.
|
|
Hmm, it must be because the part is flexible in Studio. But that’s weird.
The exported part simply says “use XX.dat,” where XX.dat is the 3D model for
the hose. So Studio sees it the same way as the flexible part… well, I’m not
clear on why that prevents Studio from showing it but that’s the only lead I
have
| | | | The only way it works is:
* create or import the lDraw in Leocad,
* export as Wavefront (.obj),
* import in PD,
* export to Studio.
|
|
In that case, you’re exporting a new 3D model, not linked to the part’s (file)name.
So Studio doesn’t have it in its database.
Maybe it could also work if you simply fed PD the XX.dat of the part but under
another filename.
(Studio doesn’t have the subparts/primitives u9053.dat (end) and 77.dat (hose
section) as parts and even less as flexible parts, so there should be no need
to do the rename dance further down the hierarchy.)
| | Or, depending what's your doing, simply opening the lDraw in Studio, copy
this part(s) and past if (them) in Studio.
|
Or just directly use the part that’s in Studio, no?
I’ll keep that bug “under my elbow” and throw it at the devs when they don’t
expect it, mwahaha!
|
|
| Author: | SylvainLS | | Posted: | Mar 8, 2024 15:29 | | Subject: | Re: Missing legs? | | Viewed: | 42 times | | Topic: | Related Software | |
|
| In Related Software, sasquatch_eater writes:
| | I know that there is a dedicated Stud.io forum but it's just a quick question
to figure out whether I'm sane or not. Is it just me, or were there a
lot of Minifigure legs removed from the selection of pieces on Stud.io? I was
sure there used to be more but I could be wrong. One particular piece I was fairly
certain was there that no longer is is:
Has anyone else noticed this or am I just insane?
|
Well, the Faun/Animal legs aren’t in Studio now and they weren’t there as of
a few months ago.
There were ugly converted-from-LDD 3D models and those were cleaned and made
official in LDraw 23-02, but I don’t think they have had time to make it into
Studio, and, anyway, they are the plain versions, there’s no decorated version
in LDraw.
|
|
| Author: | 1001bricks | | Posted: | Mar 8, 2024 15:01 | | Subject: | Re: Help! Can't find Dolphin Part 33499pb01 | | Viewed: | 30 times | | Topic: | Related Software | |
|
| In Related Software, 1001bricks writes:
| | In Related Software, SylvainLS writes:
| | In Related Software, 1001bricks writes:
| | […]
Or open it in LeoCAD or mecabricks,
|
The problem is “it”: the file is not in LDraw, so you need to get it from Digital-bricks.de.
IDK about Mecabricks but LeoCAD can’t create it for you if you don’t download
it first.
| | save as .obj, and import this is Part Designer,
|
If you’re going through PD, there’s no reasons to go through a .obj file: PD
can import the LDraw .dat file.
|
BTW, I just spent an hour on this, if you import an lDraw file containing a Hose
rigid 3mm in PartDesigner, then when you export to Studio it shows an "empty"
(void) part.
Same if directly importing a Hose rigid 3mm in PD and Export it to Studio.
The only way it works is:
* create or import the lDraw in Leocad,
* export as Wavefront (.obj),
* import in PD,
* export to Studio.
|
Or, depending what's your doing, simply opening the lDraw in Studio, copy
this part(s) and past if (them) in Studio.
|
|
| Author: | 1001bricks | | Posted: | Mar 8, 2024 14:52 | | Subject: | Re: Help! Can't find Dolphin Part 33499pb01 | | Viewed: | 49 times | | Topic: | Related Software | |
|
| In Related Software, SylvainLS writes:
| | In Related Software, 1001bricks writes:
| | […]
Or open it in LeoCAD or mecabricks,
|
The problem is “it”: the file is not in LDraw, so you need to get it from Digital-bricks.de.
IDK about Mecabricks but LeoCAD can’t create it for you if you don’t download
it first.
| | save as .obj, and import this is Part Designer,
|
If you’re going through PD, there’s no reasons to go through a .obj file: PD
can import the LDraw .dat file.
|
BTW, I just spent an hour on this, if you import an lDraw file containing a Hose
rigid 3mm in PartDesigner, then when you export to Studio it shows an "empty"
(void) part.
Same if directly importing a Hose rigid 3mm in PD and Export it to Studio.
The only way it works is:
* create or import the lDraw in Leocad,
* export as Wavefront (.obj),
* import in PD,
* export to Studio.
Same with Hose ribbed IIRC.
Weird bug - and yes, it's not the proper place about this
If you know why, no need to start a thread for so few
|
|
| Author: | dcarmine | | Posted: | Mar 8, 2024 14:34 | | Subject: | Re: Chocolate | | Viewed: | 50 times | | Topic: | Off Topic | |
|
| This guy makes everything out of chocolate...YouTube.
In Off Topic, qwertyboy writes:
|
| Author: | sasquatch_eater | | Posted: | Mar 8, 2024 13:56 | | Subject: | Missing legs? | | Viewed: | 107 times | | Topic: | Related Software | |
|
| I know that there is a dedicated Stud.io forum but it's just a quick question
to figure out whether I'm sane or not. Is it just me, or were there a
lot of Minifigure legs removed from the selection of pieces on Stud.io? I was
sure there used to be more but I could be wrong. One particular piece I was fairly
certain was there that no longer is is:
Has anyone else noticed this or am I just insane?
--Claude
|
|
| Author: | SylvainLS | | Posted: | Mar 8, 2024 13:08 | | Subject: | Re: Chocolate | | Viewed: | 54 times | | Topic: | Off Topic | |
|
| In Off Topic, Cob writes:
| | […]
Second, I'm so confused,
-- did he paint the chocolate?
|
Food colouring.
(I’d say he sprayed some thin icing.)
Should be.
| | -- is the figure and 2x4 brick plastic or chocolate?
|
Chocolate.
Making sculptures is part of being a chocolatier (part of the exams). They do
contests too. AFAIK, they generally keep the chocolate colour(s) though.
This guy mastered both the art and social medias.
|
| Author: | yorbrick | | Posted: | Mar 8, 2024 12:51 | | Subject: | Re: Chocolate | | Viewed: | 35 times | | Topic: | Off Topic | |
|
| | Decoration on the neck part of a minifigure head looks very strange. |
| Author: | Cob | | Posted: | Mar 8, 2024 12:47 | | Subject: | Re: Chocolate | | Viewed: | 38 times | | Topic: | Off Topic | |
|
| In Off Topic, qwertyboy writes:
First this is pretty neat.
Second, I'm so confused,
-- did he paint the chocolate?
-- is it edible?
-- is the figure and 2x4 brick plastic or chocolate?
|
| Author: | 1001bricks | | Posted: | Mar 8, 2024 12:41 | | Subject: | Re: Chocolate | | Viewed: | 44 times | | Topic: | Off Topic | |
|
| In Off Topic, Nubs_Select writes:
| | In Off Topic, qwertyboy writes:
| | This is a hollow stud for the head, in case it is still relevant for the catalog.
|
|
But we're only interested in the Gummy version!
|
| Author: | Nubs_Select | | Posted: | Mar 8, 2024 12:34 | | Subject: | Re: Chocolate | | Viewed: | 50 times | | Topic: | Off Topic | |
|
| In Off Topic, qwertyboy writes:
| | This is a hollow stud for the head, in case it is still relevant for the catalog.
|
|
| Author: | The_Boyz_Bricks | | Posted: | Mar 6, 2024 14:27 | | Subject: | Re: Spring flash sale!! 95% off so get ready! | | Viewed: | 38 times | | Topic: | Off Topic | |
|
| In Off Topic, Saitobricks.ca writes:
| | In Off Topic, The_Boyz_Bricks writes:
| | Nooooooooo! I missed it!!
Can you rerun the sale?
|
I Did to see what 85, 80, and 75 looked like and I accidentally left the 85%
off on for 25 seconds, that was close! 😅
|
I actually was in your store shopping at the time and saw the sale and was very
close...
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
USA, California
Canada, Ontario
France, Provence-Alpes-Côte d'Azur
Netherlands, Groningen
)
)
Greece, West Greece
)
)
)
)
Norway, Rogaland
Finland, Uusimaa
United Kingdom, England