Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | 1001bricks | Posted: | Jun 23, 2022 12:27 | Subject: | Re: Yoda New York I Heart sw0465a | Viewed: | 53 times | Topic: | Help | |
|
| In Help, skwalk1 writes:
| Hello,
I need your help once. I have received a Yoda minifigure and would like an expertise
on the authenticity of this figure. The torso has a Lego lettering on it, but
I'm not sure if the printing on the shirt wasn't applied afterwards.
Thank you for your help!
|
What the others said - but I'd be extremely cautious due to its commercial
value.
I guess a bad brick printer guy/company could print this on a basic white torso...
And did you carefully check it's not a simple transfer? You know, mainly
for kids, you apply with water...
|
|
Author: | BricksOfFaith | Posted: | Jun 23, 2022 12:25 | Subject: | Re: Yoda New York I Heart sw0465a | Viewed: | 40 times | Topic: | Help | |
|
| In Help, skwalk1 writes:
| Hello,
I need your help once. I have received a Yoda minifigure and would like an expertise
on the authenticity of this figure. The torso has a Lego lettering on it, but
I'm not sure if the printing on the shirt wasn't applied afterwards.
Thank you for your help!
|
Honestly, out of my own, non-expert opinion of staring because I have nothing
else to do, and everything everyone else has said, I’d say it’s real!
|
|
Author: | peregrinator | Posted: | Jun 23, 2022 12:22 | Subject: | Re: Yoda New York I Heart sw0465a | Viewed: | 37 times | Topic: | Help | |
|
| In Help, rab1234 writes:
| I'm certainly no expert, but the "TM" in the BL image is higher up than yours.
Yours lines up almost exactly with the bottom of the heart. The BL one is above
the bottom of the heart. Possible yours has the bottom of the heart worn off,
but just something I noticed.
|
The "TM" is not higher up - it's that the heart in the BL image is lower,
not lined up with the lettering, unlike the OP's, which is lined up.
|
|
Author: | Cob | Posted: | Jun 23, 2022 12:20 | Subject: | Re: Yoda New York I Heart sw0465a | Viewed: | 49 times | Topic: | Help | |
|
| In Help, skwalk1 writes:
| Hello,
I need your help once. I have received a Yoda minifigure and would like an expertise
on the authenticity of this figure. The torso has a Lego lettering on it, but
I'm not sure if the printing on the shirt wasn't applied afterwards.
Thank you for your help!
|
The heart in the BL picture has a point at the bottom. The heart in the picture
appears to be more rounded.
|
|
Author: | rab1234 | Posted: | Jun 23, 2022 11:50 | Subject: | Re: Yoda New York I Heart sw0465a | Viewed: | 45 times | Topic: | Help | |
|
| I'm certainly no expert, but the "TM" in the BL image is higher up than yours.
Yours lines up almost exactly with the bottom of the heart. The BL one is above
the bottom of the heart. Possible yours has the bottom of the heart worn off,
but just something I noticed.
In Help, skwalk1 writes:
| Hello,
I need your help once. I have received a Yoda minifigure and would like an expertise
on the authenticity of this figure. The torso has a Lego lettering on it, but
I'm not sure if the printing on the shirt wasn't applied afterwards.
Thank you for your help!
|
|
|
Author: | skwalk1 | Posted: | Jun 23, 2022 10:27 | Subject: | Re: Yoda New York I Heart sw0465a | Viewed: | 57 times | Topic: | Help | |
|
| In Help, peregrinator writes:
| In Help, skwalk1 writes:
| Hello,
I need your help once. I have received a Yoda minifigure and would like an expertise
on the authenticity of this figure. The torso has a Lego lettering on it, but
I'm not sure if the printing on the shirt wasn't applied afterwards.
Thank you for your help!
|
It looks like the letters are laid on a bit thicker than in the figure image
here on BL, but that's not an uncommon variation in Lego printing:
The heart also appears to be in a slightly different location relative to the
lettering and trademark symbol but I'm assuming the black and red print were
applied separately, so that is not particularly weird either.
|
thank you for your assessment
|
|
Author: | peregrinator | Posted: | Jun 23, 2022 09:51 | Subject: | Re: Yoda New York I Heart sw0465a | Viewed: | 72 times | Topic: | Help | |
|
| In Help, skwalk1 writes:
| Hello,
I need your help once. I have received a Yoda minifigure and would like an expertise
on the authenticity of this figure. The torso has a Lego lettering on it, but
I'm not sure if the printing on the shirt wasn't applied afterwards.
Thank you for your help!
|
It looks like the letters are laid on a bit thicker than in the figure image
here on BL, but that's not an uncommon variation in Lego printing:
The heart also appears to be in a slightly different location relative to the
lettering and trademark symbol but I'm assuming the black and red print were
applied separately, so that is not particularly weird either.
|
|
Author: | skwalk1 | Posted: | Jun 23, 2022 09:06 | Subject: | Re: Yoda New York I Heart sw0465a | Viewed: | 79 times | Topic: | Help | |
|
| In Help, skwalk1 writes:
| Hello,
I need your help once. I have received a Yoda minifigure and would like an expertise
on the authenticity of this figure. The torso has a Lego lettering on it, but
I'm not sure if the printing on the shirt wasn't applied afterwards.
Thank you for your help!
|
|
|
Author: | skwalk1 | Posted: | Jun 23, 2022 09:06 | Subject: | Yoda New York I Heart sw0465a | Viewed: | 211 times | Topic: | Help | |
|
| Hello,
I need your help once. I have received a Yoda minifigure and would like an expertise
on the authenticity of this figure. The torso has a Lego lettering on it, but
I'm not sure if the printing on the shirt wasn't applied afterwards.
Thank you for your help!
|
|
|
Author: | SylvainLS | Posted: | Jun 23, 2022 06:35 | Subject: | Re: Wanted list | Viewed: | 24 times | Topic: | Technical Issues | |
|
| In Technical Issues, hpoort writes:
| In Technical Issues, LegoJack10231 writes:
| Hi, I moved items from one of my wanted list to a new wanted list but I didn’t
create a name for that wanted list. Now I can’t seem to open that wanted list
but I see 100 items on that no name list. Please help. Thank you.
|
Have you tried using the Classic View.
You might be able to rename your wanted list there.
https://www.bricklink.com/wantedView.asp?showOld=Y
|
Good idea: it may not care as much about the name as the new version.
|
|
Author: | SylvainLS | Posted: | Jun 23, 2022 06:33 | Subject: | Re: Wanted list | Viewed: | 17 times | Topic: | Technical Issues | |
|
| In Technical Issues, LegoJack10231 writes:
| […]
Okay I will do that. Thank you so much.
|
Thank me when you get an answer from HelpDesk… and, actually, thank the HelpDesk
then
|
Author: | hpoort | Posted: | Jun 23, 2022 06:28 | Subject: | Re: Wanted list | Viewed: | 20 times | Topic: | Technical Issues | |
|
| In Technical Issues, LegoJack10231 writes:
| Hi, I moved items from one of my wanted list to a new wanted list but I didn’t
create a name for that wanted list. Now I can’t seem to open that wanted list
but I see 100 items on that no name list. Please help. Thank you.
|
Have you tried using the Classic View.
You might be able to rename your wanted list there.
https://www.bricklink.com/wantedView.asp?showOld=Y
|
|
Author: | LegoJack10231 | Posted: | Jun 23, 2022 05:51 | Subject: | Re: Wanted list | Viewed: | 20 times | Topic: | Technical Issues | |
|
| In Technical Issues, SylvainLS writes:
| In Technical Issues, LegoJack10231 writes:
| In Technical Issues, SylvainLS writes:
| In Technical Issues, LegoJack10231 writes:
| Hi, I moved items from one of my wanted list to a new wanted list but I didn’t
create a name for that wanted list. Now I can’t seem to open that wanted list
but I see 100 items on that no name list. Please help. Thank you.
|
Have you tried changing its name? (Setup button)
|
Hi, thanks for the suggestion. It looks like the set up button is only functional
if the wanted list can be opened. I can’t actually open the no name list…
|
Seems you found a nice little hole of which only an admin can get you out.
Try asking for help on the HelpDesk:
https://www.bricklink.com/helpDesk.asp?helpDeskID=114
or https://helpdesk.bricklink.com/ (needs an account, same e-mail address and(/or?)
login to link it with you BL account)
|
Okay I will do that. Thank you so much.
|
|
Author: | SylvainLS | Posted: | Jun 23, 2022 05:18 | Subject: | Re: Wanted list | Viewed: | 24 times | Topic: | Technical Issues | |
|
| In Technical Issues, LegoJack10231 writes:
| In Technical Issues, SylvainLS writes:
| In Technical Issues, LegoJack10231 writes:
| Hi, I moved items from one of my wanted list to a new wanted list but I didn’t
create a name for that wanted list. Now I can’t seem to open that wanted list
but I see 100 items on that no name list. Please help. Thank you.
|
Have you tried changing its name? (Setup button)
|
Hi, thanks for the suggestion. It looks like the set up button is only functional
if the wanted list can be opened. I can’t actually open the no name list…
|
Seems you found a nice little hole of which only an admin can get you out.
Try asking for help on the HelpDesk:
https://www.bricklink.com/helpDesk.asp?helpDeskID=114
or https://helpdesk.bricklink.com/ (needs an account, same e-mail address and(/or?)
login to link it with you BL account)
|
|
Author: | LegoJack10231 | Posted: | Jun 23, 2022 05:06 | Subject: | Re: Wanted list | Viewed: | 25 times | Topic: | Technical Issues | |
|
| In Technical Issues, SylvainLS writes:
| In Technical Issues, LegoJack10231 writes:
| Hi, I moved items from one of my wanted list to a new wanted list but I didn’t
create a name for that wanted list. Now I can’t seem to open that wanted list
but I see 100 items on that no name list. Please help. Thank you.
|
Have you tried changing its name? (Setup button)
|
Hi, thanks for the suggestion. It looks like the set up button is only functional
if the wanted list can be opened. I can’t actually open the no name list…
|
|
Author: | SylvainLS | Posted: | Jun 23, 2022 04:52 | Subject: | Re: Wanted list | Viewed: | 18 times | Topic: | Technical Issues | |
|
| In Technical Issues, LegoJack10231 writes:
| Hi, I moved items from one of my wanted list to a new wanted list but I didn’t
create a name for that wanted list. Now I can’t seem to open that wanted list
but I see 100 items on that no name list. Please help. Thank you.
|
Have you tried changing its name? (Setup button)
|
Author: | LegoJack10231 | Posted: | Jun 23, 2022 04:45 | Subject: | Wanted list | Viewed: | 86 times | Topic: | Technical Issues | |
|
| Hi, I moved items from one of my wanted list to a new wanted list but I didn’t
create a name for that wanted list. Now I can’t seem to open that wanted list
but I see 100 items on that no name list. Please help. Thank you.
|
|
Author: | Nubs_Select | Posted: | Jun 23, 2022 00:53 | Subject: | Re: Help Finding A Set | Viewed: | 26 times | Topic: | Help | |
|
| Thanks for bringing attention to it so I could! |
Author: | TheCuteGiraffe | Posted: | Jun 23, 2022 00:43 | Subject: | Re: Help Finding A Set | Viewed: | 25 times | Topic: | Help | |
|
| Ha nice one! |
Author: | TheCuteGiraffe | Posted: | Jun 23, 2022 00:30 | Subject: | Re: Help Finding A Set | Viewed: | 21 times | Topic: | Help | |
|
| Yeah ha nice job though. Thanks for putting that forward to a catalogue request. |
Author: | Nubs_Select | Posted: | Jun 23, 2022 00:25 | Subject: | Re: Help Finding A Set | Viewed: | 26 times | Topic: | Help | |
|
| It’s funny that talk about random things |
Author: | TheCuteGiraffe | Posted: | Jun 22, 2022 23:40 | Subject: | Re: Help Finding A Set | Viewed: | 38 times | Topic: | Help | |
|
| Thanks Nubs_Select
It's funny to see you guys talk.
About random things.
|
Author: | rangers2011 | Posted: | Jun 22, 2022 23:29 | Subject: | Import Duties | Viewed: | 108 times | Topic: | Help | |
|
| Hello!
I am new to bricklink and buying things from overseas in general. I am in the
USA and want to buy about $200 total from a seller in the Netherlands, how can
I estimate what I would have to pay in import duties and fees if applicable?
Thank you for any help and responses.
|
Author: | 1001bricks | Posted: | Jun 22, 2022 23:05 | Subject: | Re: Help Finding A Set | Viewed: | 46 times | Topic: | Help | |
|
| In Help, BricksOfFaith writes:
I must admit...
Time for a break:
https://imgur.com/Y99R0BB
|
Author: | BricksOfFaith | Posted: | Jun 22, 2022 23:00 | Subject: | Re: Help Finding A Set | Viewed: | 31 times | Topic: | Help | |
|
| I love this forum! 🤣🤣🤣🤣 |
Author: | Nubs_Select | Posted: | Jun 22, 2022 22:49 | Subject: | Re: Help Finding A Set | Viewed: | 36 times | Topic: | Help | |
|
| Yay! |
Author: | 1001bricks | Posted: | Jun 22, 2022 22:49 | Subject: | Re: Help Finding A Set | Viewed: | 32 times | Topic: | Help | |
|
| In Help, Nubs_Select writes:
32.193% reached!
|
Author: | Nubs_Select | Posted: | Jun 22, 2022 22:48 | Subject: | Re: Help Finding A Set | Viewed: | 32 times | Topic: | Help | |
|
| |
Author: | 1001bricks | Posted: | Jun 22, 2022 22:48 | Subject: | Re: Help Finding A Set | Viewed: | 34 times | Topic: | Help | |
|
| In Help, Nubs_Select writes:
| on a separate unrelated note I just found out you can send messages to yourself
on bricklink
|
That seems very normal and safe to you?
|
Author: | Nubs_Select | Posted: | Jun 22, 2022 22:48 | Subject: | Re: Help Finding A Set | Viewed: | 29 times | Topic: | Help | |
|
| |
Author: | 1001bricks | Posted: | Jun 22, 2022 22:45 | Subject: | Re: Help Finding A Set | Viewed: | 33 times | Topic: | Help | |
|
| In Help, Nubs_Select writes:
| | Thanks Sadler_Bricks, that was exactly what I was looking for.
| Looks like I got a new name
|
You guys are unbelievable
|
Author: | Nubs_Select | Posted: | Jun 22, 2022 22:15 | Subject: | Re: Help Finding A Set | Viewed: | 44 times | Topic: | Help | |
|
| on a separate unrelated note I just found out you can send messages to yourself
on bricklink
|
Author: | Nubs_Select | Posted: | Jun 22, 2022 22:13 | Subject: | Re: Help Finding A Set | Viewed: | 43 times | Topic: | Help | |
|
| I just made the new item request. |
Author: | TheCuteGiraffe | Posted: | Jun 22, 2022 22:07 | Subject: | Re: Help Finding A Set | Viewed: | 38 times | Topic: | Help | |
|
| That would be great. I can see the value and I can also find out what parts it
has ect.
Mine is a few years old and somewhat dismantled.
|
|
Author: | 3001Bricks | Posted: | Jun 22, 2022 22:04 | Subject: | Re: Only UPS coming up in shipstation?? | Viewed: | 32 times | Topic: | Help | |
|
| In Help, Adjour writes:
| Printed a label, no issue. Next order only comes up as UPS.
I can manual select the USPS flat rate packaging, but otherwise I cannot find
any way to get to USPS shipping. This should be a USPS first class package
Its just a normal sized package like all my others, could it be the address or
is this a glitch?
Thanks all
Crystal
|
My experience with their customer service is very good. I'd just give them
a call and go through the steps together to figure out if its a bug or glitch
somewhere.
|
Author: | BricksOfFaith | Posted: | Jun 22, 2022 22:00 | Subject: | Re: Help Finding A Set | Viewed: | 42 times | Topic: | Help | |
|
| In Help, Nubs_Select writes:
Looks to me like we need to get the admins to add this set! 😉 😂
|
Author: | Nubs_Select | Posted: | Jun 22, 2022 21:45 | Subject: | Re: Help Finding A Set | Viewed: | 30 times | Topic: | Help | |
|
| No worries Glad I could help! |
Author: | TheCuteGiraffe | Posted: | Jun 22, 2022 21:43 | Subject: | Re: Help Finding A Set | Viewed: | 37 times | Topic: | Help | |
|
| Sorry I meant Nubs Select not Sadler_Bricks.
Sorry for the mistake but thanks for your help.
|
Author: | Nubs_Select | Posted: | Jun 22, 2022 21:43 | Subject: | Re: Help Finding A Set | Viewed: | 37 times | Topic: | Help | |
|
| | Thanks Sadler_Bricks, that was exactly what I was looking for.
|
Looks like I got a new name
|
Author: | TheCuteGiraffe | Posted: | Jun 22, 2022 21:41 | Subject: | Re: Help Finding A Set | Viewed: | 42 times | Topic: | Help | |
|
| Wow your good.
Thanks Sadler_Bricks, that was exactly what I was looking for.
|
Author: | Nubs_Select | Posted: | Jun 22, 2022 21:36 | Subject: | Re: Help Finding A Set | Viewed: | 42 times | Topic: | Help | |
|
| if its the one your looking for* |
Author: | TheCuteGiraffe | Posted: | Jun 22, 2022 21:32 | Subject: | Help Finding A Set | Viewed: | 171 times | Topic: | Help | |
|
| Hey Guys,
I got this lego set about 4 years ago from Toys R Us. It has a Santa minifigure
at the beach with a cooler, small table and a parasol. I have spent an hour or
so looking for it on Bricklink but cannot find it.
This part here was used for the parasol but it isn't listed in the Item appears
in section.
3960pb027
I know the minifigure also wore this hat element.
2543
Any help would be appreciated.
Thanks,
The Cute Giraffe
|
Author: | TheCuteGiraffe | Posted: | Jun 22, 2022 19:21 | Subject: | Re: What is this rubber part? | Viewed: | 29 times | Topic: | Help | |
|
| Nexo Knights little warrior people. They are on the robots. |
|
Author: | Kuboteka | Posted: | Jun 22, 2022 13:57 | Subject: | Re: Dear Admins, please help | Viewed: | 96 times | Topic: | Help | |
|
| In Help, yorbrick writes:
| In Help, Kuboteka writes:
| In Help, yorbrick writes:
| | A buyer can open an NSS, the package can be delivered the next day,
and somehow a store could still get an NSS strike. And if this scenario happened
three times at once, a store is closed. How does nobody see the problem with
this system?
|
The buyer has to complete the NSS don't they, leaving at least two weeks
after they filed it? It is not like they are opening a claim, getting the item
delivered and forgetting about stopping the NSS and it still happening automatically.
The buyer needs to complete it for the NSS to stand.
|
We had answer from admins and we checked all completed NSS and as we said - all
of them had tracking numbers, two of them even were delivered in time of NSS
completed...
|
And unfortunately it will happen again and again until you either speed up delivery
(for example, by having the stock in the same country as your business) or stop
these buyers making complaints by highlighting even more clearly that there are
very extended processing times before you post orders. As mentioned yesterday,
putting a big warning in your slogan and your banner rather than just saying
"see shipping terms" would help here. It might put off a few buyers but if they
are the ones not reading terms and then complaining then maybe that is a good
thing. The "good" buyers that read and understand your delays will presumably
still place their orders. If you can reduce the numbers filing NSS even by 1
then it slows down how quickly you get the auto suspension and so gives you longer
to resolve the NSS complaints you get.
Your business model of operating inside the EU but processing in Russia might
have worked before covid and the invasion of Ukraine but with extended delivery
times now it seems to be breaking down. It will only get worse if the Kaliningrad
issues escalate and transportation between Russia and Lithuania breaks down further.
It might partly be the buyers' fault for not reading terms but the end effect
is on your store, so you need to minimise the number of complaints.
15-20 years ago there used to be a similar oroblem on ebay. Some Chinese sellers
would claim to be in the UK but in reality were posting items from China to a
UK warehouse before posting on. So while they were eventually posted within the
UK, the delays could be very long and many complaints made. Ebay finally cleaned
that up, so any Chinese sellers have to have the product in a UK warehouse if
they claim to be in the UK. Now it works much better.
|
You are absolutely correct and we know it and work on it.
From the February we start to preparing the process when we split storage to
make separate store in Vilnius and the second selling store in Russia just for
Russian customers.
But it is a large changes with large ammount of money needed for all steps and
we can't do it momently.
Now we are in process to finish the first step - own websyte to sell parts in
Russia to have some additional profit for future changes.
It will take about a month more.
Than we will start to earn and find money for growing our inventories to make
wide stock for both stores. It can take 2-3 months.
Finaly about a month will take the process to open storage in Vilnius and manage
all processes.
We hope that at the end of this year / begining of next one we will have our
worldwide business full in Vilnius.
|
|
Author: | yorbrick | Posted: | Jun 22, 2022 13:42 | Subject: | Re: Dear Admins, please help | Viewed: | 49 times | Topic: | Help | |
|
| In Help, Kuboteka writes:
| In Help, yorbrick writes:
| | A buyer can open an NSS, the package can be delivered the next day,
and somehow a store could still get an NSS strike. And if this scenario happened
three times at once, a store is closed. How does nobody see the problem with
this system?
|
The buyer has to complete the NSS don't they, leaving at least two weeks
after they filed it? It is not like they are opening a claim, getting the item
delivered and forgetting about stopping the NSS and it still happening automatically.
The buyer needs to complete it for the NSS to stand.
|
We had answer from admins and we checked all completed NSS and as we said - all
of them had tracking numbers, two of them even were delivered in time of NSS
completed...
|
And unfortunately it will happen again and again until you either speed up delivery
(for example, by having the stock in the same country as your business) or stop
these buyers making complaints by highlighting even more clearly that there are
very extended processing times before you post orders. As mentioned yesterday,
putting a big warning in your slogan and your banner rather than just saying
"see shipping terms" would help here. It might put off a few buyers but if they
are the ones not reading terms and then complaining then maybe that is a good
thing. The "good" buyers that read and understand your delays will presumably
still place their orders. If you can reduce the numbers filing NSS even by 1
then it slows down how quickly you get the auto suspension and so gives you longer
to resolve the NSS complaints you get.
Your business model of operating inside the EU but processing in Russia might
have worked before covid and the invasion of Ukraine but with extended delivery
times now it seems to be breaking down. It will only get worse if the Kaliningrad
issues escalate and transportation between Russia and Lithuania breaks down further.
It might partly be the buyers' fault for not reading terms but the end effect
is on your store, so you need to minimise the number of complaints.
15-20 years ago there used to be a similar oroblem on ebay. Some Chinese sellers
would claim to be in the UK but in reality were posting items from China to a
UK warehouse before posting on. So while they were eventually posted within the
UK, the delays could be very long and many complaints made. Ebay finally cleaned
that up, so any Chinese sellers have to have the product in a UK warehouse if
they claim to be in the UK. Now it works much better.
|
|
Author: | azbrickz | Posted: | Jun 22, 2022 13:13 | Subject: | Re: What is this rubber part? | Viewed: | 27 times | Topic: | Help | |
|
| Yeah, I threw several of those away before I realized they are actually LEGO.
In Help, Biglesdug writes:
| In Help, azbrickz writes:
| In Help, Biglesdug writes:
| I can't find these any ideas? they are rubberish and slightly larger then
1 stud
Thanks
|
|
Thank you, I thought it was a shoulder, but there was no pin and its soft plastic
not rubber.
Thanks!
|
|
|
Author: | Biglesdug | Posted: | Jun 22, 2022 13:02 | Subject: | Re: What is this rubber part? | Viewed: | 34 times | Topic: | Help | |
|
| In Help, azbrickz writes:
| In Help, Biglesdug writes:
| I can't find these any ideas? they are rubberish and slightly larger then
1 stud
Thanks
|
|
Thank you, I thought it was a shoulder, but there was no pin and its soft plastic
not rubber.
Thanks!
|
Author: | azbrickz | Posted: | Jun 22, 2022 13:00 | Subject: | Re: What is this rubber part? | Viewed: | 41 times | Topic: | Help | |
|
| In Help, Biglesdug writes:
| I can't find these any ideas? they are rubberish and slightly larger then
1 stud
Thanks
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|