Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | Admin_Russell | Posted: | May 2, 2021 23:04 | Subject: | Re: New Packing Dimensions Feature | Viewed: | 72 times | Topic: | Catalog | |
| In Catalog, Admin_Russell writes:
| I'd also like to include a little chart showing the effect of releasing this
tool (see Image 3). And we still have 4 more days to go in April.
|
Here is the chart with the final April numbers, in addition to all the data from
the last 3 years. There is about 6 months of data from right after Instant Checkout
was released that is not included here, but we'll have that with a future
update. It will not be much different than what's shown in the first part
of the graph.
In May of last year, we experienced a surge of requests from the community which
resulted in an overload of the manual process. We had been planning to add Packing
Dimensions to the standard catalog change forms from the beginning, as can be
seen from a footnote to the original Forum article on Packing Dimensions in October
2017:
2) integration of the System Packaging Dimensions field into catalog submission
forms
But it was really the gentle push from the community that put this project on
the priority list.
|
|
|
Author: | wildchicken13 | Posted: | May 2, 2021 23:01 | Subject: | Re: Promotional set "Kamille" | Viewed: | 46 times | Topic: | Catalog | |
| In Catalog, normann1974 writes:
| A friend of mine has informed me of a promotional set "Kamille" given out to
children at one or more LEGO events by the Danish supermarket "Bilka". Kamille
is one of the supermarket's mascots. The set came in a LEGO zip-lock bag,
and it's unknown whether or not it came with instructions in the bag, it
may have been available only to the event hosts. A PDF version of the instructions
have been made available by Bilka on request.
Please see attached images.
Is this a set that is allowed to be put on BL?
/Jan
|
I don't see any reason why not; plenty of promotional sets are sold here
on BrickLink. You'll need to create a catalog entry for it first, though.
|
|
Author: | axaday | Posted: | May 2, 2021 19:12 | Subject: | Inventory Change Request for Set 76130-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 87615pb08 White Aircraft Fuselage Aft Section Curved Top 6 x 10 with Black 'Stark Industries' Logo Pattern on Both Sides (Stickers) - Set 76130 (Counterpart)
* Add 2 Part 3010pb309 White Brick 1 x 4 with 2 Black Round Airplane Windows Pattern (Sticker) - Set 76130 (Counterpart)
* Add 2 Part 3009pb239 White Brick 1 x 6 with 3 Black Round Airplane Windows Pattern (Sticker) - Set 76130 (Counterpart)
* Add 1 Part 85984pb316 Tan Slope 30 1 x 2 x 2/3 with Targeting Screen Pattern (Sticker) - Set 76130 (Counterpart)
* Add 1 Part 28192pb003 White Slope 45 2 x 1 with Control Panel Buttons Pattern (Sticker) - Set 76130 (Counterpart)
* Add 1 Part 28192pb002 White Slope 45 2 x 1 with Control Panel Circles Pattern (Sticker) - Set 76130 (Counterpart)
* Add 1 Part 3069bpb923 White Tile 1 x 2 with Groove with Spider and Control Panel Pattern (Sticker) - Set 76130 (Counterpart)
|
|
Author: | normann1974 | Posted: | May 2, 2021 17:51 | Subject: | Promotional set "Kamille" | Viewed: | 173 times | Topic: | Catalog | Status: | Open | |
| A friend of mine has informed me of a promotional set "Kamille" given out to
children at one or more LEGO events by the Danish supermarket "Bilka". Kamille
is one of the supermarket's mascots. The set came in a LEGO zip-lock bag,
and it's unknown whether or not it came with instructions in the bag, it
may have been available only to the event hosts. A PDF version of the instructions
have been made available by Bilka on request.
Please see attached images.
Is this a set that is allowed to be put on BL?
/Jan
|
|
|
Author: | samsam2 | Posted: | May 2, 2021 17:28 | Subject: | Inventory Change Request for Set 41300-1 | Viewed: | 24 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 87079pb929 White Tile 2 x 4 with Puppy in Pink Sunglasses Shaking a Paw and Obstacle Jumping Pattern (Sticker) - Set 41300 (Counterpart)
* Add 1 Part 14769pb406 White Tile, Round 2 x 2 with Bottom Stud Holder with Pink '10', Yellow Star and Five White Stars on Silver Background Pattern (Sticker) - Set 41300 (Counterpart)
* Add 1 Part 87079pb930 White Tile 2 x 4 with Pink Paw Print on Trophy and Silver Stars Pattern (Sticker) - Set 41300 (Counterpart)
|
|
Author: | randyf | Posted: | May 2, 2021 14:18 | Subject: | Re: Inventory Change Request for Set 70168-1 | Viewed: | 18 times | Topic: | Inventories Requests | |
| In Inventories Requests, martintoystore writes:
| Please make changes to the following inventory:
* Add 1 Part 3839b Dark Bluish Gray Plate, Modified 1 x 2 with Bar Handles - Flat Ends, Low Attachment
|
This request will not be accepted.
The part is already included in the inventory by way of the minifigure
Cheers,
Randy
|
Author: | martintoystore | Posted: | May 2, 2021 13:11 | Subject: | Inventory Change Request for Set 70168-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 3839b Dark Bluish Gray Plate, Modified 1 x 2 with Bar Handles - Flat Ends, Low Attachment
|
Author: | legoman007 | Posted: | May 2, 2021 12:51 | Subject: | Re: thumbnail gallery display | Viewed: | 34 times | Topic: | Catalog | |
| In Catalog, ciprinius writes:
| When i open any category in catalog there is "list with images" displayed by
default. I prefer thumbnail gallery to be default. Is there any way to set this
in settings somewhere?
|
Hi, I also just met this annyoing issue and solution is to allow more cookies.
You can adjust cookies for BL at the very bottom of the page in "Cookie Settings
and Privacy". I allowed the first three cookies and now it is working again
|
|
Author: | DarthRaynor | Posted: | May 2, 2021 11:24 | Subject: | Inventory Change Request for Set 7659-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part 30350 Dark Bluish Gray Tile, Modified 2 x 3 with 2 Clips - (Undetermined Clip Type)
* Add 1 Part 30350c Dark Bluish Gray Tile, Modified 2 x 3 with 2 U Clips
Comments from Submitter:
I own the set and kept it built since I bought it. Just recently disassembled it for storage and using BL inventory to ensure I have all parts.
|
|
Author: | a.ch | Posted: | May 2, 2021 11:10 | Subject: | Inventory Change Request for Set 6195-1 | Viewed: | 24 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change {2 to 1} Part Black 3711 Technic, Link Chain (Extra)
Comments from Submitter:
I've got a sealed set and there's just one extra chain link, not 2.
|
|
Author: | tec | Posted: | May 2, 2021 08:23 | Subject: | Re: Wanted List Inventory | Viewed: | 39 times | Topic: | Suggestions | |
| With the "apply order" button you see a table with proposed amounts to add
It's not easy to spot things that overflow. This is what the OP is finding
out I think.
I prefer to NOT HAVE an automatic overflow mechanism as the OP posted, I fear
I can't control it. I still prefer to see what happens and write down notes.
I dunno if they can highlight in yellow/red/orange when the amounts are inequal.
This could be informative and yet adaptable to user's habits.
|
|
Author: | Roxyncz | Posted: | May 2, 2021 05:54 | Subject: | Inventory Change Request for Set 10265-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 3069bpb921 Tan Tile 1 x 2 with Groove with Car Radio Pattern (Sticker) - Set 10265 (Counterpart)
* Add 2 Part 2431pb690 Blue Tile 1 x 4 with White 'POWER BY FORD' Pattern (Sticker) - Set 10265 (Counterpart)
* Add 1 Part 2431pb687 White Tile 1 x 4 with 'K AM58IH' License Plate Pattern (Sticker) - Set 10265 (Counterpart)
* Add 2 Part 2431pb689 White Tile 1 x 4 with 'NSW' and 'BAD-5296' License Plate Pattern (Sticker) - Set 10265 (Counterpart)
* Add 2 Part 87079pb927 Yellow Tile 2 x 4 with 'MICHIGAN' and 'GT 1967' License Plate Pattern (Sticker) - Set 10265 (Counterpart)
* Add 1 Part 3069bpb922 Light Bluish Gray Tile 1 x 2 with Groove with Black Car on White Background Pattern (Sticker) - Set 10265 (Counterpart)
* Add 1 Part 14769pb404 Light Bluish Gray Tile, Round 2 x 2 with Bottom Stud Holder with Black 'GT' Pattern (Sticker) - Set 10265 (Counterpart)
* Add 1 Part 3941pb40 White Brick, Round 2 x 2 with Axle Hole with Red 'AFK' and 'N2O' Pattern (Sticker) - Set 10265 (Counterpart)
* Add 1 Part 2431pb688 White Tile 1 x 4 with License Plate 'PEKH-0280' on White Background Pattern (Sticker) - Set 10265 (Counterpart)
* Add 1 Part 2431pb691 Yellow Tile 1 x 4 with 'PEKH-0280' License Plate on Yllow Background Pattern (Sticker) - Set 10265 (Counterpart)
* Add 2 Part 87079pb926 Dark Blue Tile 2 x 4 with with 'CALIFORNIA' and 'P51 AK2' License Plate Pattern (Sticker) - Set 10265 (Counterpart)
* Add 1 Part 27925pb005 Blue Tile, Round Corner 2 x 2 Macaroni with Black '390 HIGH PERFORMANCE' and Checkered Pattern (Sticker) - Set 10265 (Counterpart)
* Add 1 Part 93273pb154 Black Slope, Curved 4 x 1 Double with Silver 'CAUTION FAN' with Border on Orange Background Pattern (Sticker) - Set 10265 (Counterpart)
|
|
Author: | Leftoverbricks | Posted: | May 2, 2021 04:59 | Subject: | Pending approval: mineravager01 | Viewed: | 88 times | Topic: | Catalog | Status: | Open | |
| Can I help the inventory/catalog admin with this part? |
Author: | jpoplover1979 | Posted: | May 1, 2021 21:39 | Subject: | Inventory Change Request for Set 60226-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 3069bpb847 Light Bluish Gray Tile 1 x 2 with Groove with Vehicle Control Panel Two Sliders Pattern (Alternate)
Comments from Submitter:
Came in my set of 60226 Mars Research Shuttle instead of part 3069bpc1
|
Author: | peregrinator | Posted: | May 1, 2021 17:27 | Subject: | Inventory Change Request for Set 40220-1 | Viewed: | 24 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 40220stk01b (Not Applicable) Sticker Sheet for Set 40220 - (35024/6200592) (Alternate) (match ID 1)
Comments from Submitter:
Comes from sealed set bought directly from Lego
|
|
Author: | MrPetovan | Posted: | May 1, 2021 16:08 | Subject: | Re: Wanted List Inventory | Viewed: | 41 times | Topic: | Suggestions | |
| Indeed, but not multiple ones. So if you bought 20 of something, you can apply
5 to wanted list A, and it will still try to apply the full 20 from the same
order to wanted list B even if 5 were used completing wanted list A.
In Suggestions, Brickwilbo writes:
| In Suggestions, orchidelique writes:
| It would be nice if there was an inventory system that all of your Wanted Lists
could look at. I'm usually working on a few different wanted lists at the
same time. Currently, if I buy 20 of a piece, I have to assign a specific number
of those to specific wanted lists. It would be nice if all of my wanted lists
looked at it and I could see when particular wanted lists reached 100%. You could
then mark that list as "Complete", and it would take those items out of the inventory
pool. Deleting a wanted list would leave the pieces in the pool.
|
With the apply order function you can complete a specific Wantlist.
|
|
|
Author: | Brickwilbo | Posted: | May 1, 2021 15:40 | Subject: | Re: Wanted List Inventory | Viewed: | 23 times | Topic: | Suggestions | |
| In Suggestions, orchidelique writes:
| It would be nice if there was an inventory system that all of your Wanted Lists
could look at. I'm usually working on a few different wanted lists at the
same time. Currently, if I buy 20 of a piece, I have to assign a specific number
of those to specific wanted lists. It would be nice if all of my wanted lists
looked at it and I could see when particular wanted lists reached 100%. You could
then mark that list as "Complete", and it would take those items out of the inventory
pool. Deleting a wanted list would leave the pieces in the pool.
|
With the apply order function you can complete a specific Wantlist.
|
|
Author: | orchidelique | Posted: | May 1, 2021 15:30 | Subject: | Wanted List Inventory | Viewed: | 88 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
| It would be nice if there was an inventory system that all of your Wanted Lists
could look at. I'm usually working on a few different wanted lists at the
same time. Currently, if I buy 20 of a piece, I have to assign a specific number
of those to specific wanted lists. It would be nice if all of my wanted lists
looked at it and I could see when particular wanted lists reached 100%. You could
then mark that list as "Complete", and it would take those items out of the inventory
pool. Deleting a wanted list would leave the pieces in the pool.
|
|
Author: | randyf | Posted: | May 1, 2021 10:51 | Subject: | Inventory Change Request for Set 10144-1 | Viewed: | 34 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 4 Part Dark Bluish Gray {32064 Technic, Brick 1 x 2 with Axle Hole to 32064c Technic, Brick 1 x 2 with Axle Hole (+ Shape) and Inside Side Supports}
Comments from Submitter:
User DarthRaynor confirmed this variant in accordance with the following change request: https://www.bricklink.com/message.asp?ID=1268565
|
Author: | normann1974 | Posted: | May 1, 2021 10:29 | Subject: | Re: Inventory Change Request for Set 4406-1 | Viewed: | 22 times | Topic: | Inventories Requests | |
| Photos of sealed bags.
/Jan
|
|
|
Author: | normann1974 | Posted: | May 1, 2021 10:28 | Subject: | Inventory Change Request for Set 4406-1 | Viewed: | 29 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 8 Part Dark Bluish Gray 4133 Pane for Window 2 x 4 x 3 {Regular to Counterpart}
* Change 1 Part Green {3044 Slope 45 2 x 1 Double (Undetermined Underside Type) to 3044b Slope 45 2 x 1 Double - with Inside Bar}
* Change 1 Part Red {3044 Slope 45 2 x 1 Double (Undetermined Underside Type) to 3044b Slope 45 2 x 1 Double - with Inside Bar}
* Change 4 Part White 4132 Window 2 x 4 x 3 Frame - Solid Studs {Regular to Counterpart}
* Change 4 Part Yellow 4132 Window 2 x 4 x 3 Frame - Solid Studs {Regular to Counterpart}
* Change 4 Part White 4132c03 Window 2 x 4 x 3 Frame with Dark Bluish Gray Window 2 x 4 x 3 Pane (4132 / 4133) {Counterpart to Regular}
* Change 4 Part Yellow 4132c03 Window 2 x 4 x 3 Frame with Dark Bluish Gray Window 2 x 4 x 3 Pane (4132 / 4133) {Counterpart to Regular}
Comments from Submitter:
The windows come preassembled in this set. I'll post pictures in forum. I will double check the rest of this inventory when I part out two of these sets out soon.
|
|
Author: | DarthRaynor | Posted: | May 1, 2021 08:40 | Subject: | Inventory Change Request for Set 7671-1 | Viewed: | 27 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 2 Part 4623 Light Bluish Gray Plate, Modified 1 x 2 with Bar Arm Up (Undetermined Horizontal Arm Length)
* Add 2 Part 4623a Light Bluish Gray Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 6mm)
Comments from Submitter:
I own the set and kept it built since I bought it. Just recently disassembled it for storage and using BL inventory to ensure I have all parts.
|
Author: | MKRacing66 | Posted: | Apr 30, 2021 21:47 | Subject: | Re: Lego Socks | Viewed: | 41 times | Topic: | Catalog | |
| Somewhere, someone, is coming up with a Lego COSPLAY outfit |
Author: | WilliamRaine | Posted: | Apr 30, 2021 19:15 | Subject: | Inventory Change Request for Set 70810-1 | Viewed: | 26 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 4 Part 553c Pearl Gold Brick, Round 2 x 2 Dome Top - Hollow Stud with Bottom Axle Holder x Shape + Orientation (Alternate) (match ID 4)
* Change 4 Part Pearl Gold 553b Brick, Round 2 x 2 Dome Top - Blocked Open Stud with Bottom Axle Holder x Shape + Orientation {match ID 0 to 4}
Comments from Submitter:
Used Set, though it comes with x4 of the hollow stud variant. Wondering if anyone who has the set new can confirm this?
|
|
Author: | Rob_and_Shelagh | Posted: | Apr 30, 2021 17:28 | Subject: | Re: Lego Socks | Viewed: | 49 times | Topic: | Catalog | |
| In Catalog, cosmicray writes:
| Early this morning, out doing some shopping, and spied this LEGO endcap at WalMart.
On the side was a dino and images of LEGO socks. They were not in the endcap,
nor on the LEGO aisle. Has anyone seen these in stores ? Youth or Adult sizes
? I don't see these in the Catalog.
Nita Rae
|
that sounds like a very uncomfortable item, could be worse.. Lego underwear anyone?
ouch
Robert
|
Author: | FantasyBricks | Posted: | Apr 30, 2021 17:27 | Subject: | Re: Lego Socks | Viewed: | 40 times | Topic: | Catalog | |
| I wonder if the socks are located in the clothing areas of Walmart (men's/women's/children's).
I also wonder if there really IS a Lego dinosaur or if they just show that dinosaur
to get people's attention for the socks.
|
Author: | cosmicray | Posted: | Apr 30, 2021 17:12 | Subject: | Lego Socks | Viewed: | 174 times | Topic: | Catalog | Status: | Open | |
| Early this morning, out doing some shopping, and spied this LEGO endcap at WalMart.
On the side was a dino and images of LEGO socks. They were not in the endcap,
nor on the LEGO aisle. Has anyone seen these in stores ? Youth or Adult sizes
? I don't see these in the Catalog.
Nita Rae
|
|
|
Author: | faro | Posted: | Apr 30, 2021 16:22 | Subject: | Re: What color is this? 30375 | Viewed: | 37 times | Topic: | Colors | |
| In Colors, faro writes:
| In Colors, peregrinator writes:
|
I have a 30375 that isn't quite lime, or isn't in the range of shades
I would normally associate with lime. Here it is with x118 that I have verified
(as far as I am able, by comparing it with other pieces) as lime. Is this just
a normal color variation? The part in question doesn't seem to come in any
other greenish colors. Looking at the color guide online it seems to resemble
"neon green" which I'm not sure is an actual color:
|
Hi bricklinkers,
if somebody has some of those for sale please get in contact with me.
Thanks and greetings
Farid
|
Nobody? Please check your lime torsos
Thanks a lot
Greets
Farid
PS: Without this community I would have never built my armies
|
|
Author: | WilliamRaine | Posted: | Apr 30, 2021 15:57 | Subject: | Inventory Change Request for Set 70810-1 | Viewed: | 29 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 4 Part 3957b Black Antenna 4H - Flat Top (Alternate) (match ID 3)
* Change 4 Part Black 3957 Antenna 4H - Round Top {match ID 0 to 3}
Comments from Submitter:
Used set, though it came with x4 of the flat top variant. Looking to see if anyone else can verify from a new set?
|
|
Author: | SezaR | Posted: | Apr 30, 2021 15:28 | Subject: | Re: Inventory Change Request for Set 725-2 | Viewed: | 20 times | Topic: | Inventories Requests | |
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Add 1 Part 2913c03 White Electric, Train Track Contact Base with Wire (97cm) with Blue Electric, Connector, 2-Way Male Rounded Wide Long with Cross-Cut Pins (2913 / bb0093bc01) (match ID 3)
* Add 1 Part 2913c04 White Electric, Train Track Contact Base with Wire (97cm) with Light Gray Electric, Connector, 2-Way Male Rounded Wide Long with Cross-Cut Pins (2913 / bb0093bc01) (Alternate) (match ID 3)
|
Source: Bluxe
https://www.bricklink.com/message.asp?ID=1184378
|
|
Author: | DarthRaynor | Posted: | Apr 30, 2021 11:22 | Subject: | Inventory Change Request for Set 10144-1 | Viewed: | 30 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 4623a Dark Bluish Gray Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 6mm)
* Delete 1 Part 4623 Dark Bluish Gray Plate, Modified 1 x 2 with Bar Arm Up (Undetermined Horizontal Arm Length)
Comments from Submitter:
I own the set and kept it built since I bought it. Just recently disassembled it for storage and using BL inventory to ensure I have all parts.
|
|
Author: | randyf | Posted: | Apr 30, 2021 10:43 | Subject: | Re: Inventory Change Request for Set 21326-1 | Viewed: | 26 times | Topic: | Inventories Requests | |
| In Inventories Requests, Jerryaki writes:
| Please make changes to the following inventory:
* Delete 1 Part 49307 Medium Nougat Slope, Curved 1 x 1 Double (Extra)
Comments from Submitter:
Hello! Thank you for inventory-ing this set. I compared my extra pieces to the list, and had the difference above (did not have the extra bow piece). Not sure how else to verify, but that's what I came up with when I was building the set. Hope it helps.
|
This request will not be accepted.
The original submitter of this inventory had this extra part. It is not common,
but it has been found as an extra part in a few sets.
For future information, our guidelines concerning extra parts are listed on the
following help page:
https://www.bricklink.com/help.asp?helpID=1562
The section that specifically deals with this situation is "Removing or Changing
Extra Items".
Cheers,
Randy
|
|
Author: | axaday | Posted: | Apr 30, 2021 05:49 | Subject: | Inventory Change Request for Set 4586-1 | Viewed: | 20 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Minifig rac094 Stunt Racer
* Delete 1 Part 41850 Black Body, Racers Driver
* Delete 1 Part 2446px5 Black Minifigure, Headgear Helmet Motorcycle (Standard) with Flames Yellow and Red Pattern
* Delete 1 Part 2447 Trans-Black Minifigure, Visor Standard
* Delete 1 Part 3626bpb0031 Yellow Minifigure, Head Glasses with Blue Glasses, 2 White Teeth and Sideburns Pattern - Blocked Open Stud
|
Author: | crepundi | Posted: | Apr 30, 2021 05:20 | Subject: | image of part 3192a | Viewed: | 60 times | Topic: | Catalog | Status: | Open | |
| Please correct the image of door 1 x 3 x 3 right in colour blue. It
is showing the door 1 x 3 x 4
Regards,
Gisela
|
Author: | SezaR | Posted: | Apr 30, 2021 03:58 | Subject: | Re: Inventory Change Request for Set 727-1 | Viewed: | 14 times | Topic: | Inventories Requests | |
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Delete 8 Part trainrim Black Train Rim for 4.5V & 12V Locomotive Wheels
* Delete 8 Part wheel2a Black Train Wheel Spoked for Motor
* Change 8 Part Black wheel2ac01 Train Wheel Spoked for Motor with Black Train Rim for 4.5V & 12V Locomotive Wheels (wheel2a / trainrim) {Counterpart to Regular}
|
|
|
|
Author: | SezaR | Posted: | Apr 30, 2021 03:57 | Subject: | Inventory Change Request for Set 727-1 | Viewed: | 27 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 8 Part trainrim Black Train Rim for 4.5V & 12V Locomotive Wheels
* Delete 8 Part wheel2a Black Train Wheel Spoked for Motor
* Change 8 Part Black wheel2ac01 Train Wheel Spoked for Motor with Black Train Rim for 4.5V & 12V Locomotive Wheels (wheel2a / trainrim) {Counterpart to Regular}
|
Author: | InsanityBeckonz | Posted: | Apr 30, 2021 03:38 | Subject: | Inventory Change Request for Set 60167-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 4 Part 14137pb001 Black Hinge Plate 1 x 8 with Angled Side Extensions, Squared Plate Underside with 2 Yellow Stripes Pattern (Sticker) - Sets 60021 / 60086 / 60207 (Counterpart)
|
Author: | jancg | Posted: | Apr 30, 2021 02:46 | Subject: | Re: Set 8640, please remove 2714a (light grey) | Viewed: | 25 times | Topic: | Inventories | |
| Cheecky! |
|
Author: | paulvdb | Posted: | Apr 29, 2021 22:52 | Subject: | Re: Inventory Change Request for Set 11014-1 | Viewed: | 16 times | Topic: | Inventories Requests | |
| In Inventories Requests, normann1974 writes:
| In Inventories Requests, paulvdb writes:
| In Inventories Requests, normann1974 writes:
| Please make changes to the following inventory:
* Change 2 Part {Dark Bluish Gray to Light Bluish Gray} 6232 Brick, Modified 2 x 2 with Pin and Axle Hole
Comments from Submitter:
As I always do, I double check my inventories when I part out the sets afterwards. How this color ended up DBG in the inventory I don't know. It might have been from the data that BrickLink supplied, because I didn't change it. I fixed only variants and added extras and counterparts, no changes to colors or numbers. Or someone changed it while the inventory was in limbo.
|
The PCC 6347704 is listed for dark bluish gray in the Bricklink catalog but should
be light bluish gray. I have submitted a request to remove that PCC from dark
bluish gray. It should ne added to light bluish gray after that request is accepted.
|
That is strange. Where did that PCC come from? It was automatically filled out
by BL, and apparently I didn't notice the wrong color.
4211529 is the PCC listed in the instructions, and that points to LBG which is
correct. So the PCC for DBG was right all along?
/Jan
|
Bricklink uses the Lego replacement parts data to load the initial inventory
(if you choose to use that option when submitting an inventory). PCC 6347704
is listed in that data and was originally added for the wrong color in the BL
catalog.
|
|
Author: | SezaR | Posted: | Apr 29, 2021 19:43 | Subject: | Inventory Change Request for Set 725-2 | Viewed: | 26 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 2913c03 White Electric, Train Track Contact Base with Wire (97cm) with Blue Electric, Connector, 2-Way Male Rounded Wide Long with Cross-Cut Pins (2913 / bb0093bc01) (match ID 3)
* Add 1 Part 2913c04 White Electric, Train Track Contact Base with Wire (97cm) with Light Gray Electric, Connector, 2-Way Male Rounded Wide Long with Cross-Cut Pins (2913 / bb0093bc01) (Alternate) (match ID 3)
|
|
Author: | _djm | Posted: | Apr 29, 2021 18:38 | Subject: | Looking for set image from Dacta (?) catalog | Viewed: | 63 times | Topic: | Catalog | Status: | Open | |
| I'm hoping someone with Dacta catalogs from the mid(?) 1990's (perhaps
1993 - 1997) can help.
I recently acquired a somewhat obscure Control Lab set:
which I am in the process of creating the catalog inventory for. There don't
appear to be any references to this set of most of the other standard sites (e,g,
brickset, peeron) and the only image I could find of this set was at http://www.miniland.nl/Dacta/sets/2001187.htm.
The set in question is the set in the yellow case at the rear of the photo.
Via the wayback machine, I've had a trawl through LEGO's various sites
and have had no joy in finding any image for this set. Based on what I have found,
my presumption is that this set would have been listed in a Dacta catalog from
sometime in the mid-1990s - it may be that this set only was for sale in the
UK/Europe, although that is speculation on my behalf.
I was wondering whether anybody with Dacta catalogs from the mid-1990's would
be willing to take a look through their catalogs to see if they can find an image
for the set. My photo skills are "lacking" and if an image for the set is available
in a catalog, it will likely be better than any photo I add. If you do find an
image for the set, would you please submit it as the image for this set. I'd
also appreciate it if you would send me a copy of the image too please, as I
would like to be able to add this set to rebrickable.com.
Thank you and regards,
David
|
|
Author: | Jerryaki | Posted: | Apr 29, 2021 17:03 | Subject: | Inventory Change Request for Set 21326-1 | Viewed: | 34 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part 49307 Medium Nougat Slope, Curved 1 x 1 Double (Extra)
Comments from Submitter:
Hello! Thank you for inventory-ing this set. I compared my extra pieces to the list, and had the difference above (did not have the extra bow piece). Not sure how else to verify, but that's what I came up with when I was building the set. Hope it helps.
|
|
Author: | jancg | Posted: | Apr 29, 2021 16:40 | Subject: | Inventory Change Request for Set 6382-1 | Viewed: | 29 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 3 Part Red {3001old Brick 2 x 4 without Cross Supports to 3001 Brick 2 x 4}
Comments from Submitter:
I can supply photo's.
|
|
Author: | SezaR | Posted: | Apr 29, 2021 16:15 | Subject: | Inventory Change Request for Set 8846-1 | Viewed: | 31 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 2 Part x77 Black String, Cord (Undetermined Type)
* Add 2 Part x77ac75 Black String, Cord Thin 75cm
Comments from Submitter:
I bought a lot of technic sets from Germany. The sets, including this one were pre built and were very dusty. I think I bought them from the original owner.
I checked the length of wires (still attached to the hook and technic axles) and they are of length about 75cm.
|
|
Author: | normann1974 | Posted: | Apr 29, 2021 16:12 | Subject: | Re: Inventory Change Request for Set 11014-1 | Viewed: | 25 times | Topic: | Inventories Requests | |
| In Inventories Requests, paulvdb writes:
| In Inventories Requests, normann1974 writes:
| Please make changes to the following inventory:
* Change 2 Part {Dark Bluish Gray to Light Bluish Gray} 6232 Brick, Modified 2 x 2 with Pin and Axle Hole
Comments from Submitter:
As I always do, I double check my inventories when I part out the sets afterwards. How this color ended up DBG in the inventory I don't know. It might have been from the data that BrickLink supplied, because I didn't change it. I fixed only variants and added extras and counterparts, no changes to colors or numbers. Or someone changed it while the inventory was in limbo.
|
The PCC 6347704 is listed for dark bluish gray in the Bricklink catalog but should
be light bluish gray. I have submitted a request to remove that PCC from dark
bluish gray. It should ne added to light bluish gray after that request is accepted.
|
That is strange. Where did that PCC come from? It was automatically filled out
by BL, and apparently I didn't notice the wrong color.
4211529 is the PCC listed in the instructions, and that points to LBG which is
correct. So the PCC for DBG was right all along?
/Jan
|
|
Author: | SezaR | Posted: | Apr 29, 2021 15:59 | Subject: | Inventory Change Request for Set 722-2 | Viewed: | 25 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 4 Part trainrim Black Train Rim for 4.5V & 12V Locomotive Wheels
* Delete 4 Part wheel2a Red Train Wheel Spoked for Motor
* Delete 4 Part 737a Red Plate, Modified 2 x 4 with Train Coupler Open for Magnet
* Delete 2 Part x547b Red Magnet Coupling, Train - 7mm Cylinder
* Delete 2 Part x547b Blue Magnet Coupling, Train - 7mm Cylinder
* Add 2 Part 737ac01 Red Plate, Modified 2 x 4 with Train Coupler Open for Magnet with Same Color Magnet Coupling, Train - 7mm Cylinder (737a / x547b)
* Add 2 Part 737ac02 Red Plate, Modified 2 x 4 with Train Coupler Open for Magnet with Blue Magnet Coupling, Train - 7mm Cylinder (737a / x547b)
* Add 1 Part 2913c01 White Electric, Train Track Contact Base with Wire (97 cm) and Blue Connector, 2-Way Male Rounded Wide Long with Hollow Pins
* Change 4 Part Red wheel2ac01 Train Wheel Spoked for Motor with Black Train Rim for 4.5V & 12V Locomotive Wheels (wheel2a / trainrim) {Counterpart to Regular}
|
|
Author: | SezaR | Posted: | Apr 29, 2021 15:57 | Subject: | Re: Inventory Change Request for Set 726-1 | Viewed: | 14 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Delete 5 Part wheel2a Red Train Wheel Spoked for Motor
* Delete 5 Part trainrim Black Train Rim for 4.5V & 12V Locomotive Wheels
* Add 1 Part 2913c04 Light Gray Electric, Train Track Contact Base with Wire (97cm) with Light Gray Electric, Connector, 2-Way Male Rounded Wide Long with Cross-Cut Pins (2913 / bb0093bc01)
* Change 5 Part Red wheel2ac01 Train Wheel Spoked for Motor with Black Train Rim for 4.5V & 12V Locomotive Wheels (wheel2a / trainrim) {Counterpart to Regular}
|
I think you meant to put white for the color of the wire. I have updated this
manually.
Cheers,
Randy
|
It is still blue.
I think the color of the part should be white for consistency.
The Train Track Contact Base is singled color and it always came with white wire.
|
|
Author: | StonesHeart | Posted: | Apr 29, 2021 15:56 | Subject: | Re: Set 8640, please remove 2714a (light grey) | Viewed: | 32 times | Topic: | Inventories | |
| In Inventories, runner.caller writes:
| In Inventories, 1974 writes:
| In Inventories, randyf writes:
| In Inventories, StonesHeart writes:
| Hello All,
I own the set 8640 and item 2714a (light grey) shows nowhere in the instruction
or on the box.
|
|
| They are used in Step 14 to build the frame of the cockpit.
|
It's rather obvious. How did you construct the set if you didn't use
the two light grey ski-poles?
Cheers,
Ole
|
Probably without them. haha.
I think the cockpit would still work, but wouldn't be as sturdy.
Isn't there a condition that a set inventory can only be updated from a brand
new set that has just been opened?
|
Darn, you guys are right. Feel a bit stupid now. Found the grey sticks as well.
Thanks for letting me know!
|
|
Author: | paulvdb | Posted: | Apr 29, 2021 15:40 | Subject: | Re: Inventory Change Request for Set 11014-1 | Viewed: | 21 times | Topic: | Inventories Requests | |
| In Inventories Requests, normann1974 writes:
| Please make changes to the following inventory:
* Change 2 Part {Dark Bluish Gray to Light Bluish Gray} 6232 Brick, Modified 2 x 2 with Pin and Axle Hole
Comments from Submitter:
As I always do, I double check my inventories when I part out the sets afterwards. How this color ended up DBG in the inventory I don't know. It might have been from the data that BrickLink supplied, because I didn't change it. I fixed only variants and added extras and counterparts, no changes to colors or numbers. Or someone changed it while the inventory was in limbo.
|
The PCC 6347704 is listed for dark bluish gray in the Bricklink catalog but should
be light bluish gray. I have submitted a request to remove that PCC from dark
bluish gray. It should ne added to light bluish gray after that request is accepted.
|
|
Author: | normann1974 | Posted: | Apr 29, 2021 15:20 | Subject: | Inventory Change Request for Set 11014-1 | Viewed: | 27 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part {Dark Bluish Gray to Light Bluish Gray} 6232 Brick, Modified 2 x 2 with Pin and Axle Hole
Comments from Submitter:
As I always do, I double check my inventories when I part out the sets afterwards. How this color ended up DBG in the inventory I don't know. It might have been from the data that BrickLink supplied, because I didn't change it. I fixed only variants and added extras and counterparts, no changes to colors or numbers. Or someone changed it while the inventory was in limbo.
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|