Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | SylvainLS | Posted: | Mar 19, 2021 07:49 | Subject: | Re: Part colour matching | Viewed: | 20 times | Topic: | Suggestions | |
|
| In Suggestions, enfurnoh writes:
| One thing I would find VERY useful would be the ability to pick a selection of
part and then see what colours they have in common.
I do a lot of MOC's in Studio before I build them in the real. A lot of
times I just want to a colour change but many parts are not available in all
colours. If I could choose the parts I want to check and then see which colours
they all have in common it would save a ton of time. I doubt I'm the only
one who would find this useful.
You already have all the data in your system, it wouldn't be that hard to
code that option.
|
First, it’s not clear if you’re talking about Studio or if you want that suggestion
for the website/catalogue.
If the former, the dedicated forum for Studio and PartDesigner is here: https://forum.bricklink.com/
(hover over the red Studio icon on every page, then click “Studio Forum”).
AND, you can already simply do that in Studio: check “Hide unavailable colors”
in the general Colour Palette (on the top right), then select the parts in the
viewport, then open the colour palette, and only the common colours will be available.
|
|
Author: | enfurnoh | Posted: | Mar 19, 2021 05:35 | Subject: | Part colour matching | Viewed: | 54 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| One thing I would find VERY useful would be the ability to pick a selection of
part and then see what colours they have in common.
I do a lot of MOC's in Studio before I build them in the real. A lot of
times I just want to a colour change but many parts are not available in all
colours. If I could choose the parts I want to check and then see which colours
they all have in common it would save a ton of time. I doubt I'm the only
one who would find this useful.
You already have all the data in your system, it wouldn't be that hard to
code that option.
|
|
Author: | cosmicray | Posted: | Mar 17, 2021 07:24 | Subject: | Re: Forum for new seller testing | Viewed: | 50 times | Topic: | Suggestions | |
|
| In Suggestions, TechnicBuilt writes:
| As a new seller I think it would be nice to have a dedicated forum category where
you can ask people to test your store setup when you first open so they can catch
any issues and provide feedback to ease a new seller into their first few days
of opening.
|
My spin on this subject is that every seller, not just new sellers, should have
a sand box where they be a pretend buyer. They can do everything other
than create a real order, make real payments, or leave real feedback. All of
those would be simulated, from a simulated buyer.
Nita Rae
|
|
Author: | roguemjr | Posted: | Mar 16, 2021 18:31 | Subject: | Re: Choosing stockroom when adding to inventory | Viewed: | 28 times | Topic: | Suggestions | |
|
| Thank you for this, but this does not do what I am requesting. I am inventorying
all my parts and sets. I am using all 3 stockrooms depending if it is set I
am keeping, parts i am keeping, or parts to keep and sell later.
What I am looking for is when I pick the A, B, or C from the drop down menu,
then it automatically checks the box for storeroom so I don't have to do
2-3 clicks.
Does this make it more clear?
Thanks,
Michael
In Suggestions, Brickwilbo writes:
| In Suggestions, roguemjr writes:
| Is it possible to have the box automatically pick add to stockroom when you use
the drop down menu to pick which stockroom you want to put part in. Right now,
if i pick "B" in the drop down menu, I have to make a second click to add it
to stockroom B even after I pick "B."
Thanks,
Michael
roguemjr
Madstone's Emporium
|
Check the checkbox Select default stockroom here
https://www.bricklink.com/invOptionsAdd.asp
|
|
|
Author: | psusaxman2000 | Posted: | Mar 16, 2021 16:11 | Subject: | Re: Choosing stockroom when adding to inventory | Viewed: | 27 times | Topic: | Suggestions | |
|
| In Suggestions, Brickwilbo writes:
| In Suggestions, roguemjr writes:
| Is it possible to have the box automatically pick add to stockroom when you use
the drop down menu to pick which stockroom you want to put part in. Right now,
if i pick "B" in the drop down menu, I have to make a second click to add it
to stockroom B even after I pick "B."
Thanks,
Michael
roguemjr
Madstone's Emporium
|
Check the checkbox Select default stockroom here
https://www.bricklink.com/invOptionsAdd.asp
|
I swore I was through all the different option screens and never saw that. Thanks
|
|
Author: | Brickwilbo | Posted: | Mar 16, 2021 15:55 | Subject: | Re: Choosing stockroom when adding to inventory | Viewed: | 27 times | Topic: | Suggestions | |
|
| In Suggestions, roguemjr writes:
| Is it possible to have the box automatically pick add to stockroom when you use
the drop down menu to pick which stockroom you want to put part in. Right now,
if i pick "B" in the drop down menu, I have to make a second click to add it
to stockroom B even after I pick "B."
Thanks,
Michael
roguemjr
Madstone's Emporium
|
Check the checkbox Select default stockroom here
https://www.bricklink.com/invOptionsAdd.asp
|
|
Author: | psusaxman2000 | Posted: | Mar 16, 2021 15:50 | Subject: | Re: Choosing stockroom when adding to inventory | Viewed: | 21 times | Topic: | Suggestions | |
|
| In Suggestions, roguemjr writes:
| Is it possible to have the box automatically pick add to stockroom when you use
the drop down menu to pick which stockroom you want to put part in. Right now,
if i pick "B" in the drop down menu, I have to make a second click to add it
to stockroom B even after I pick "B."
Thanks,
Michael
roguemjr
Madstone's Emporium
|
I don't know of anyway to do this, but like the suggestion. I use the stock
rooms all the time and would love to see the ability to default the check box
and the actual stock room option (A, B or C) by default.
|
|
Author: | roguemjr | Posted: | Mar 16, 2021 15:44 | Subject: | Choosing stockroom when adding to inventory | Viewed: | 69 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| Is it possible to have the box automatically pick add to stockroom when you use
the drop down menu to pick which stockroom you want to put part in. Right now,
if i pick "B" in the drop down menu, I have to make a second click to add it
to stockroom B even after I pick "B."
Thanks,
Michael
roguemjr
Madstone's Emporium
|
Author: | StormChaser | Posted: | Mar 16, 2021 14:26 | Subject: | Re: Constraction categorisation needs fixes | Viewed: | 49 times | Topic: | Suggestions | |
|
| In Suggestions, Swamp_Kryakwa writes:
| Constraction series parts (Bionicle, HF, SW buildable figures, Slizer, Chima
buildable figures, Ben 10) has really messy categorisation.
|
Um. Yeah, about that . . .
|
Author: | TechnicBuilt | Posted: | Mar 16, 2021 14:03 | Subject: | Forum for new seller testing | Viewed: | 90 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| As a new seller I think it would be nice to have a dedicated forum category where
you can ask people to test your store setup when you first open so they can catch
any issues and provide feedback to ease a new seller into their first few days
of opening.
|
|
Author: | Swamp_Kryakwa | Posted: | Mar 16, 2021 14:01 | Subject: | Constraction categorisation needs fixes | Viewed: | 81 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| Constraction series parts (Bionicle, HF, SW buildable figures, Slizer, Chima
buildable figures, Ben 10) has really messy categorisation. ATM, there are 4
categories that contain parts from that series, and the way this categorisation
is done isn't best. First and most obvious thing - "Large Figure Torso Armor
2 Chest Holes" (id 90652), which falls off the whole system (mostly, part is
categorised depending on which series presented it first - HF for HF, Bionicle
for Bionicle, Technic for Slizer and Large Figure for any other), being presented
as HF part it's treated as Large Figure one.
But things don't end there. IMO, the way constraction parts are categorised
is really off for Bricklink. What I suggest? We should have 2 categories which
will contain constraction elements: Bionicle-ish ones (parts before 2011), and
CCBS one (constraction parts from 2011 and latter ones), and maybe keep some
ones like socket parts in Technic, but I'm unsure about that. Also maybe
Ben 10 parts should stay in Large Figures, this one is fine to me. This will
suit Bricklink way better than what we have today, IMO.
P.S. If we need to keep things close to what we have today for any reason (having
parts categories based on figure series), I still suggest moving all CCBS to
one single category, their usage is really wide, we can't say about most
of them that it's HF-only part, and part "Technic, Ball Joint 2 x 7 with
2 Ball Joint" (id 32173) should be moved to Bionicle - despite appearing for
first time Slizer, it's too confusing that this part is separated from all
other Bionicle-like parts.
|
|
Author: | peregrinator | Posted: | Mar 15, 2021 07:20 | Subject: | Re: Option to search for unprinted parts | Viewed: | 35 times | Topic: | Suggestions | |
|
| In Suggestions, DeLuca writes:
| In Suggestions, peregrinator writes:
| In Suggestions, jennnifer writes:
| In Suggestions, The_RealRedHex writes:
| Maybe an option to search for unprinted parts could be implemented. This would
include stickers, printed parts, and stickers over assemblies.
Regards,
Theo - The_RealRedHex
|
Search:
-pattern
The word pattern is included in the name of nearly every decorated part.
|
I think perhaps the OP wants a search that will *exclude* decorated parts
|
Jen is correct - Searching for a part and adding "-pattern" does exclude
decorated pieces.
|
Ah, my mistake, I did not see the negation.
|
|
Author: | Stellar | Posted: | Mar 15, 2021 05:42 | Subject: | Re: Option to search for unprinted parts | Viewed: | 27 times | Topic: | Suggestions | |
|
| In Suggestions, infinibrix writes:
| In Suggestions, jennnifer writes:
| In Suggestions, The_RealRedHex writes:
| Maybe an option to search for unprinted parts could be implemented. This would
include stickers, printed parts, and stickers over assemblies.
Regards,
Theo - The_RealRedHex
|
Search:
-pattern
The word pattern is included in the name of nearly every decorated part.
|
Whilst unofficial Stormchaser has drafted up that he does not want to see the
word pattern included for minifig parts and possibly extending that to other
parts in the long term?
https://www.bricklink.com/help.asp?helpID=2506
"Excluded Words - The following words should not appear in figure titles: "figure"
and "pattern.""
|
That refers to figure titles not to figure parts titles.
|
Either way when I suggested trying to enable people to be able to search for
non decorated/patterned legs like this:-
https://www.bricklink.com/message.asp?ID=1256683
The change was made only to be reverted back because yourself and then other
people looked too deeply into how two-tone somehow had anything to do with dual
molded?
Two-Tone = A visual colour combination made up of two colours
Dual Molded = A manufacturing process
The point being that anything that can help narrow down peoples searches can
only be a good thing
|
|
|
Author: | infinibrix | Posted: | Mar 15, 2021 05:24 | Subject: | Re: Option to search for unprinted parts | Viewed: | 36 times | Topic: | Suggestions | |
|
| In Suggestions, jennnifer writes:
| In Suggestions, The_RealRedHex writes:
| Maybe an option to search for unprinted parts could be implemented. This would
include stickers, printed parts, and stickers over assemblies.
Regards,
Theo - The_RealRedHex
|
Search:
-pattern
The word pattern is included in the name of nearly every decorated part.
|
Whilst unofficial Stormchaser has drafted up that he does not want to see the
word pattern included for minifig parts and possibly extending that to other
parts in the long term?
https://www.bricklink.com/help.asp?helpID=2506
"Excluded Words - The following words should not appear in figure titles: "figure"
and "pattern.""
Either way when I suggested trying to enable people to be able to search for
non decorated/patterned legs like this:-
https://www.bricklink.com/message.asp?ID=1256683
The change was made only to be reverted back because yourself and then other
people looked too deeply into how two-tone somehow had anything to do with dual
molded?
Two-Tone = A visual colour combination made up of two colours
Dual Molded = A manufacturing process
The point being that anything that can help narrow down peoples searches can
only be a good thing
|
|
Author: | Teup | Posted: | Mar 15, 2021 04:01 | Subject: | Re: Item number changes | Viewed: | 29 times | Topic: | Suggestions | |
|
| In Suggestions, Hygrotus writes:
| In Suggestions, Teup writes:
| In Suggestions, hpoort writes:
| In Suggestions, Doodlebug writes:
| It would be helpful if Admin would send out a notification when they change an
item number.
How frustrating is it to look for a part in my inventory only to find the number
has been changed.
If a notice is sent out for items marked for deletion, why can't it be done
for changes.
|
There is this: https://www.bricklink.com/catalogReqList.asp?viewAction=I
where you can see and search the entire changelog.
|
How strange that there are no dates in that list? I would like to see which numbers
have changed but without dates, well, I know nothing. It just becomes a sum-up
of every single part that was once changed..
|
Just click show dates
|
Aaah Thanks! I am bookmarking that page right now, because tomorrow I will
have forgotten how to get there 100%
|
|
Author: | Hygrotus | Posted: | Mar 15, 2021 03:52 | Subject: | Re: Item number changes | Viewed: | 28 times | Topic: | Suggestions | |
|
| In Suggestions, Teup writes:
| In Suggestions, hpoort writes:
| In Suggestions, Doodlebug writes:
| It would be helpful if Admin would send out a notification when they change an
item number.
How frustrating is it to look for a part in my inventory only to find the number
has been changed.
If a notice is sent out for items marked for deletion, why can't it be done
for changes.
|
There is this: https://www.bricklink.com/catalogReqList.asp?viewAction=I
where you can see and search the entire changelog.
|
How strange that there are no dates in that list? I would like to see which numbers
have changed but without dates, well, I know nothing. It just becomes a sum-up
of every single part that was once changed..
|
Just click show dates
|
|
|
Author: | Teup | Posted: | Mar 15, 2021 03:49 | Subject: | Re: Item number changes | Viewed: | 20 times | Topic: | Suggestions | |
|
| In Suggestions, hpoort writes:
| In Suggestions, Doodlebug writes:
| It would be helpful if Admin would send out a notification when they change an
item number.
How frustrating is it to look for a part in my inventory only to find the number
has been changed.
If a notice is sent out for items marked for deletion, why can't it be done
for changes.
|
There is this: https://www.bricklink.com/catalogReqList.asp?viewAction=I
where you can see and search the entire changelog.
|
How strange that there are no dates in that list? I would like to see which numbers
have changed but without dates, well, I know nothing. It just becomes a sum-up
of every single part that was once changed..
|
|
Author: | hpoort | Posted: | Mar 15, 2021 02:50 | Subject: | Re: Item number changes | Viewed: | 17 times | Topic: | Suggestions | |
|
| In Suggestions, Doodlebug writes:
| It would be helpful if Admin would send out a notification when they change an
item number.
How frustrating is it to look for a part in my inventory only to find the number
has been changed.
If a notice is sent out for items marked for deletion, why can't it be done
for changes.
|
There is this: https://www.bricklink.com/catalogReqList.asp?viewAction=I
where you can see and search the entire changelog.
|
|
Author: | Swamp_Kryakwa | Posted: | Mar 15, 2021 01:29 | Subject: | Re: Fix color inconsistency | Viewed: | 54 times | Topic: | Suggestions | |
|
| In Suggestions, DeLuca writes:
| In Suggestions, Swamp_Kryakwa writes:
| In Suggestions, BrickCompulsion writes:
| In Suggestions, Swamp_Kryakwa writes:
| Bricklink is missing lots of colors, and says that parts produced in that colors
have some different ones.
|
What colours are missing?
| Things like Pearl Red, Pearl Green, Trans-Neon Red
|
Do you have examples of these colours?
|
Don't have pic, but can tell you set names
Rahkshi Turahk, Rahkshi Lerahk, Tahu Nuva respectively
|
|
Author: | DeLuca | Posted: | Mar 15, 2021 01:23 | Subject: | Re: Fix color inconsistency | Viewed: | 34 times | Topic: | Suggestions | |
|
| In Suggestions, Swamp_Kryakwa writes:
| In Suggestions, BrickCompulsion writes:
| In Suggestions, Swamp_Kryakwa writes:
| Bricklink is missing lots of colors, and says that parts produced in that colors
have some different ones.
|
What colours are missing?
| Things like Pearl Red, Pearl Green, Trans-Neon Red
|
Do you have examples of these colours?
|
|
Author: | Swamp_Kryakwa | Posted: | Mar 15, 2021 01:00 | Subject: | Re: Fix color inconsistency | Viewed: | 48 times | Topic: | Suggestions | |
|
| In Suggestions, BrickCompulsion writes:
| In Suggestions, Swamp_Kryakwa writes:
| Bricklink is missing lots of colors, and says that parts produced in that colors
have some different ones. Also, Trans-Medium Blue is treated as non-neon color,
which is big mistake. Trans-Medium Blue IS Neon color, and I want such issues
to be fixed
|
What colours are missing?
I would disagree that trans medium blue is a neon colour
|
Things like Pearl Red, Pearl Green, Trans-Neon Red
|
|
Author: | albumman | Posted: | Mar 15, 2021 00:17 | Subject: | Re: Fix color inconsistency | Viewed: | 48 times | Topic: | Suggestions | |
|
| In Suggestions, Stellar writes:
| In Suggestions, Swamp_Kryakwa writes:
| Bricklink is missing lots of colors, and says that parts produced in that colors
have some different ones. Also, Trans-Medium Blue is treated as non-neon color,
which is big mistake. Trans-Medium Blue IS Neon color, and I want such issues
to be fixed
|
You can cross-reference colors with this chart: http://ryanhowerter.net/colors.php
|
WOW, Beautiful job on that chart!
|
|
Author: | DeLuca | Posted: | Mar 14, 2021 21:05 | Subject: | Re: Option to search for unprinted parts | Viewed: | 34 times | Topic: | Suggestions | |
|
| In Suggestions, peregrinator writes:
| In Suggestions, jennnifer writes:
| In Suggestions, The_RealRedHex writes:
| Maybe an option to search for unprinted parts could be implemented. This would
include stickers, printed parts, and stickers over assemblies.
Regards,
Theo - The_RealRedHex
|
Search:
-pattern
The word pattern is included in the name of nearly every decorated part.
|
I think perhaps the OP wants a search that will *exclude* decorated parts
|
Jen is correct - Searching for a part and adding "-pattern" does exclude
decorated pieces.
Search for "Torso": https://www.bricklink.com/v2/search.page?q=Torso+&tab=P#T=P
Search for "Torso -pattern": https://www.bricklink.com/v2/search.page?q=Torso+-pattern&tab=P#T=P
|
|
Author: | peregrinator | Posted: | Mar 14, 2021 20:59 | Subject: | Re: Option to search for unprinted parts | Viewed: | 35 times | Topic: | Suggestions | |
|
| In Suggestions, jennnifer writes:
| In Suggestions, The_RealRedHex writes:
| Maybe an option to search for unprinted parts could be implemented. This would
include stickers, printed parts, and stickers over assemblies.
Regards,
Theo - The_RealRedHex
|
Search:
-pattern
The word pattern is included in the name of nearly every decorated part.
|
I think perhaps the OP wants a search that will *exclude* decorated parts
|
|
Author: | jennnifer | Posted: | Mar 14, 2021 20:13 | Subject: | Re: Option to search for unprinted parts | Viewed: | 31 times | Topic: | Suggestions | |
|
| In Suggestions, The_RealRedHex writes:
| Maybe an option to search for unprinted parts could be implemented. This would
include stickers, printed parts, and stickers over assemblies.
Regards,
Theo - The_RealRedHex
|
Search:
-pattern
The word pattern is included in the name of nearly every decorated part.
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|