Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | normann1974  | | Posted: | Jun 13, 2020 14:42 | | Subject: | Textured variant of 30602 | | Viewed: | 62 times | | Topic: | Catalog | | Status: | Open | |
| Today, I found a variant of with thin walls where the sides are slightly
textured. I found it only in yellow, all other parts have blank sides. There
is also a variant where the thin part of the back wall is slightly textured while
the sides are blank. Please consider updating the note on the part. I'll
be uploading the picture to the part. Accept it if you want it.
/Jan
|
|
 |
| Author: | infinibrix | | Posted: | Jun 13, 2020 12:39 | | Subject: | Minifigures being given incorrect codes? | | Viewed: | 103 times | | Topic: | Catalog | | Status: | Open | |
| I don't know if its just me but with regards to the ideas and dimensions
themes would'nt it make sense to only give minifigures the 'idea'
and 'dim' codes if they don't already belong to an established and
existing theme? For instance all the Ideas Pirates of Barracuda Bay minifigs
should perhaps be given 'pi' numbers instead of 'idea' numbers?
Likewise dimensions Gimli, Gandalf, Legolas should maybe have a 'lor'
number instead of 'dim' same goes for Slimer and Stay Puft Marshmallow
man which also have 'dim' numbers instead of 'gb'
With the original ghostbusters minifigs from Ecto-1 it looks like they were already
changed from 'idea' numbers to 'gb' numbers with an i on the
end which might be a good way to keep some continuity on the site?
|
|
| Author: | primadeluxe | | Posted: | Jun 13, 2020 07:48 | | Subject: | Fancy a quiz about stickers set 374-1? | | Viewed: | 70 times | | Topic: | Catalog | | Status: | Open | |
| Here we go: (the answers are on the bottom of this message)
1. How many Classic Fire Logo stickers are on the stickersheet of set 374-1?
2. How many Classic Fire Logo stickers are on the counterparts together?
3. Which counterpart is responsible for the difference?
4. Can we just rename this counterpart? Yes or No?
5. Why not?
6. What can we do about this?
If you have correctly answered all the 6 questions, your price is the title 'logical
thinker of the day'!
Cheers, Wilbert
Answers:
1. Five
2. Six (3009pb043L: one; 3009pb043R: one; 3001oldpb07: two (both sides); BA067pb01:
two (both sides)
3. Part 3001oldpb07 (look closely to the frontpage of the instructions as the
instructions itself are not conclusive)
4. No
5. As counterpart 3001oldpb07 is also related to set 590-1, which has the right
number of Classic Fire Logo stickers on the stickersheet (six), which by the
way is not proven by the (frontpage of the) instructions. But ok .....!
6. I really do not know hahaha! No seriously: add a new counterpart for set 374-1.
|
|
| Author: | 1271moggy | | Posted: | Jun 12, 2020 07:43 | | Subject: | Set 3178 | | Viewed: | 64 times | | Topic: | Catalog | | Status: | Open | |
| Just wondering if anyone has a sealed set of .
I am parting out an incomplete set bought off Ebay and have a query with part
.
The current inventory lists the undetermined part 3794 in LBG, but I have found
LBG during part out.
So hence the request for a sealed set to check which variant is used, and to
correct the catalogue if needed.
Linda
|
| Author: | jsnhghs | | Posted: | Jun 11, 2020 03:43 | | Subject: | Why listed as US rather than uk? | | Viewed: | 95 times | | Topic: | Catalog | | Status: | Open | |
| Please can someone tell me why c88us and c89us are listed as US when it is a
UK catalogue?
|
| Author: | DeanS | | Posted: | Jun 10, 2020 15:45 | | Subject: | Item approval/change request | | Viewed: | 45 times | | Topic: | Catalog | | Status: | Open | |
| I have added the image to minifig hp223
I would like to upload my inventory of these
I also have weight: 3.8 grams
and the description should read:
"Cho Chang (Set 40419) Grin / Frown"
Thanks!
-Dean
|
|
| Author: | tons_of_bricks | | Posted: | Jun 9, 2020 16:17 | | Subject: | two versions of part 970c00pb0052 | | Viewed: | 86 times | | Topic: | Catalog | | Status: | Open | |
| Not sure how to go about this, but part
needs to be broken up into 2 separate entries. Currently we only have one for
a lime printing. I have been listing legs recently and came across 4 of these
legs. Three of them had lime printing, the fourth has bright green printing(verified
as Lego). Searching for "Buzz Lightyear" figures, I came across minifig toy004
from which the picture seems to show bright green printing, yet inventory says
it has the legs with lime print.
My guess is that it hasn't been discovered yet that there is a bright green
version, so all the figures with it are being inventoried as having the lime
version.
|
|
| Author: | Hamster_Prod | | Posted: | Jun 9, 2020 13:23 | | Subject: | Who decides the minifig item No? | | Viewed: | 140 times | | Topic: | Catalog | | Status: | Open | |
| Hi,
This is probably a very daft question, but I can't seem to find the answer
anywhere so... where does the minifig item number come from?
For example, take the minifig 'twn071' (https://www.bricklink.com/v2/catalog/catalogitem.page?M=twn071)
As far as I understand, this means it is the 71st figure within the category
'Town'.
So who decides the categories and the number ordering within those categories?
LEGO? Bricklink? Someone else?
I am asking because I want to start seriously collecting and organising figures
across several categories, but I would like to fully understand this system before
I start using it!
Thanks in advance,
Josh
|
|
|
| Author: | electricbaer | | Posted: | Jun 7, 2020 23:35 | | Subject: | SOA part in 5541 | | Viewed: | 84 times | | Topic: | Catalog | | Status: | Open | |
| I have the small stickers that fit over the blue 6541 and the blue 4070 to this
set as they are applied in the first model. However in the alternate build for
this set, they look to be applied to a 1 x 6 brick.
Do they qualify to be added as a SOA part, and also as a brick decorated part
to the catalog, or are they nullified from being added since they can be applied
in multiple configurations in this set?
|
|
| Author: | normann1974 | | Posted: | Jun 7, 2020 14:15 | | Subject: | 88072 in Light Gray | | Viewed: | 220 times | | Topic: | Catalog | | Status: | Open | |
| I have found this part in Light Gray, and I'll be supplying an image to the
catalog. Here is some comparison images. The car base is also Light Gray.
/Jan
|
|
| Author: | markim | | Posted: | Jun 5, 2020 14:28 | | Subject: | did i do something wrong? | | Viewed: | 153 times | | Topic: | Catalog | | Status: | Open | |
| Hey fellow bricklinkers,
Today i parted out 20 times set 41916 - dots series 2 charms.
I added half of the printed tiles to the catalog (the other half was already
there), but it is not added to the set inventory. Am I to impatient or did i
do something wrong in adding?
Very curious in discovering (still...) the adding to the catalog functions 
Thx for your insights! - Marielle
|
|
| Author: | Admin_Russell | | Posted: | Jun 4, 2020 04:40 | | Subject: | We have a new Catalog Administrator! | | Viewed: | 318 times | | Topic: | Catalog | | Status: | Open | |
| Hello everyone,
I have some long-awaited news for you! We have created a new Catalog Admin position
which has privileges on both sides of the system, the catalog and inventories.
This is a culmination of about 3 years of work, and we are so proud of our first
ever member to take this position, Hygrotus.
He has steadily worked his way up to this level from his years of being an outstanding
and reliable contributor, to a special class of contributor known as an Inventories
Verifier, to one year experience as an Inv Admin, and then most recently about
14 months as a Catalog Associate. We are pleased that he has stuck with the program
and now is going to forge ahead.
We are combining the two "halves" of the system for many reasons, but the main
one being efficiency. If only one admin is available on a given weekend, for
example, we can take care of contributions on both sides, which are often dependent
on each other.
We will retain the Catalog Associate and Inv Admin positions for the purpose
of training new Catalog Admins. They will be considered transitory positions.
For more info on the Community Expert Program, please see this post:
https://www.bricklink.com/message.asp?ID=1196395
You may also visit our Community Expert Program page:
https://www.bricklink.com/memberAdmins.asp
and also read a few FAQs in the Help Center:
https://www.bricklink.com/help.asp?helpID=974
|
|
|
| Author: | jsnhghs | | Posted: | Jun 3, 2020 10:36 | | Subject: | Activity Book | | Viewed: | 47 times | | Topic: | Catalog | | Status: | Open | |
| Hi
I have the City Activity Book and it has printed number: 4650343
no such listing for that
but there is 4650342 for the same item, are there two versions?
thanks
|
| Author: | Ruinol | | Posted: | Jun 2, 2020 12:57 | | Subject: | Not being able to recognize what this is from | | Viewed: | 137 times | | Topic: | Catalog | | Status: | Open | |
| Anyone that knows from which set it comes, thanx!!! But maybe it's just (part
of) a MOC
|
|
| Author: | jezurka | | Posted: | Jun 2, 2020 07:42 | | Subject: | Catalog number 3245-Ju | | Viewed: | 88 times | | Topic: | Catalog | | Status: | Open | |
| Hello
I find lego catalog which I can not find in BL inventory.
Code is 3245-Ju. Is seams it is print for Yugoslavia (language is Slovenian).
Does anyone know the year. In my opinion it is something around middle 60s.
I put picture.
|
|
| Author: | Stellar | | Posted: | Jun 1, 2020 13:39 | | Subject: | Santa porg hat | | Viewed: | 84 times | | Topic: | Catalog | | Status: | Open | |
| Is there a guideline about animals not getting headgear?
I ask it as someone else asked me why Santa porg dind't had a hat in the
catalogue.
But there is Krypto, that has a body wear cape for example.
Greetings,
Sergio
|
|
| Author: | electricbaer | | Posted: | Jun 1, 2020 11:21 | | Subject: | Sticker Over Assembly - Yay or Nay? | | Viewed: | 73 times | | Topic: | Catalog | | Status: | Open | |
| I may have missed the official comm on this, but it seems like the restriction
on SOA's changed sometime in the recent past. I see some discussions where
CAs don't seem to have issue with them.
I only ask because I have a pile I've collected for a while - some may already
be submitted, some not - was going to work through them, but don't want to
put the effort in if they are discouraged:
|
|
|
| Author: | bje | | Posted: | Jun 1, 2020 04:40 | | Subject: | Torso: Misprint or Variant? | | Viewed: | 109 times | | Topic: | Catalog | | Status: | Open | |
| I have some from sets between 2008 and 2010 that have a white
knot on the tie and Light Grey lapels, sides and button prints, as in the part
on the left in the image.
The assembly on the right is from sets in 2007, 2010 and 2013, which has the
same torso as the current entry for this part - black knot and Dark Grey lapels,
sides and button prints, on the right in the image.
Is this a misprint on those torsos I have or is it a differrent torso altogether?
|
|
|
| Author: | Northwinds | | Posted: | Jun 1, 2020 04:18 | | Subject: | Did horizontal become vertical & vice versa? | | Viewed: | 168 times | | Topic: | Catalog | | Status: | Open | |
| https://www.bricklink.com/v2/catalog/catalogitem.page?P=30241b&idColor=11#T=P&C=11
This part used to be called horizontal, right?
This is causing for problems, at least the inventory of the Central Perk set
is off.
But I am not really sure I understand the logic behind the name change.
(Perhaps this happened a long time ago already but I only noticed just now )
Peter
|
|
| Author: | StormChaser | | Posted: | Jun 1, 2020 01:26 | | Subject: | Make A List | | Viewed: | 314 times | | Topic: | Catalog | | Status: | Open | |
| As announced in mid-April, today the item type and category definitions were
updated.
Two months from now, on August 1st, we'd like to (which doesn't mean
for a certainty that we will) simultaneously launch a couple of projects from
the roadmap as follows:
1. Clarification of Item Types and Moving Items - A project to clearly define
what constitutes sets, parts, minifigures, books, gear, and catalogs. Once clear
definitions exist, some (and potentially many) items may need to be changed from
one type to another to comply with definitions.
7. Part Reclassifications - A project to revisit certain difficult-to-define
parts and determine if they would fit better in different categories.
During the coming two months, please make a list of the items you feel are miscategorized,
whether by item type or by category. As you make your list or lists, refer to
the new definitions to see where they support or fail to support your position
and be prepared to offer suggestions for improvements to the definitions.
I've no doubt that the discussion that occurs will also involve categories
themselves, so be prepared with a list of specific categories that you feel should
be removed altogether, categories that should be renamed, and new categories
that are needed.
In the interim, there is no need to reply to this message.
|
|
| Author: | angi1975 | | Posted: | May 29, 2020 15:50 | | Subject: | sets | | Viewed: | 94 times | | Topic: | Catalog | | Status: | Open | |
| | hi when will you be adding set 11717 to the inventory |
| Author: | Dimi_DBB | | Posted: | May 29, 2020 08:42 | | Subject: | post001 vs post001new | | Viewed: | 177 times | | Topic: | Catalog | | Status: | Open | |
| Hi,
Can someone tell me the difference between these 2?
The inventory of both is exactly the same and (imho) both minifigs in the pictures
look the same as well.
The only difference is the average price sold, new is about double the price
of old.
If they're exactly the same, just one is from old sets and the other from
more recent collectible minifig sets, do they really need separate entries?
In a lot of used Lego I found torso how do I know which minifig
it was?
|
|
| Author: | SezaR | | Posted: | May 28, 2020 04:53 | | Subject: | Train wheels | | Viewed: | 153 times | | Topic: | Catalog | | Status: | Open | |
| I recently submitted a part variant for
* | | 4180c01 (Inv) Brick, Modified 2 x 4 with Black Wheels, Train Spoked Small (23mm D.) and Black Pins (4180 / wheel3 / 2344)
Parts: Wheel |
The other variation of this part has red central pin
instead of black. Currently, an extra photo for this item is included to show
this second variation and a note is also added.
My submission is rejected since CatAdmins are working on guidelines to figure
out when the split variations of a part, but I am informed that "the likelihood
of adding these as catalog entries in the future is rather low."
I thought a discussion on the forum about this part can be more helpful.
While I am in general against adding variation of parts as separate entries,
I do not know why this variation was not added in the past 15 years, and why
my two attempts in adding them in the past 3 years has been rejected. I started
to list reasons I know for why it is important to split this part and for doing
this, I checked the listing of
* | | 4180c01 (Inv) Brick, Modified 2 x 4 with Black Wheels, Train Spoked Small (23mm D.) and Black Pins (4180 / wheel3 / 2344)
Parts: Wheel |
Catadmins have some criteria for when to split an entry and will even work on
it. For this particular part, I am wondering if they have checked how many sellers
have included in the description of their 4180c01 "red pin?"
We can assume some sellers who currently have these wheels for sale may not know
variations or the importance of variations for buyers, so why they did not mention
it in the description.
Since 4180c01 with red central pin was produced for one entire year (1986) and
the other variation for 10 years (1980-85 and 1987-90) we expect to see about
%9 of wheels 4180c01 that are ever produced to have red central pin. We can
also see that currently, 34 lots out of 163 lots for sale have "red" in the description.
This is about %20 of all listings. (the number of items in each lot is different,
and we do not know how fast wheels with red central pin are sold)
Does this show that almost all sellers know the importance of the color of pin
for buyers? Based on this observation, I would say definitely.
The note for the entry of 3443c07 is probably not correct:
This part also exists with red axle pins, but this is considered to be a production
error. Variants with red pins may be listed in the item description.
This wheel with red central pin was produced for one entire year, coming in seven
sets. This was most likely a decision of TLG rather than an error. Black pins
could not be out of stock for 12 months. The same for this part
* | | 3443c07 Train Battery Box Car with Three Contact Holes, Black Switch Lever, Black Magnets, and Black Wheels
Parts: Train |
produced in one year (1987) but before (1985-86) and after (1988-1990) TLG produced
them with red switch
* | | 3443c08 Train Battery Box Car with Three Contact Holes, Red Switch Lever, Black Magnets, and Black Wheels
Parts: Train |
Were red switch out of stock for one year? I don't think so. For some strange
reason, TLG produced this battery wagon with black switch in 1987 but after,
they went back to red-switch version again.
If you have had trains from 80's, please add your comments if you think this
part should, or should not, be replaced by two more specific entries, red or
black central pin.
This discussion will hopefully help the decision CatAdmins will make in the near
future.
|
|
|
| Author: | Cava03 | | Posted: | May 26, 2020 09:14 | | Subject: | caricamento di massa | | Viewed: | 22 times | | Topic: | Catalog | | Status: | Open | |
| Ciao a tutti, sono nuovo del sito ed avrei bisogno di aiuto..
volevo aprire un negozio ed inserire i pezzi lego tramite caricamento di massa,
premetto che il mio inventario l'ho fatto tramite rebrickable. quando provo
ad inserirlo mi da errore perchè non è inserito il prezzo o la quantità o l'
ID...Qualcuno di voi può aiutarmi?c'è un metodo più veloce?
Grazie a tutti in anticipo
|
|
| Author: | Miro78 | | Posted: | May 25, 2020 11:40 | | Subject: | Need of Plate/Tile Round Modified categories | | Viewed: | 57 times | | Topic: | Catalog | | Status: | Open | |
| If this is on the Catalog roadmap, my apologies, but I am noticing some logic
discrepancies on how some of these parts are allocated to their current categories.
Fo obvious reasons, part 25269 (Tile, Round 1 x 1 Quarter) is in the Tile Round
category, because 4 of these makes a nice circle shape.
Therefore I am assuming Part 24246 (Tile, Modified 1 x 1 Half Circle Extended
(Stadium)) is in the Tile Modified category because it's irregular and makes
no circle shape, despite one side being round.
Yet part 39739 (Tile, Round 1 x 1 Heart) is in the Tile Round category, despite
the fact that it makes no circular shape (clover leaf shape at best). To me,
they should either be in the Tile Round or Tile Modified as it's confusing
things.
There are other parts in the Tile Round category which are clearly modified like
This is also true for Plate Round category items. Perhaps it's time to create
Plate Round Modified and Tile Round Modified categories. There may be reason
for not doing this now, but things like this really bug me when searching for
parts where my logic fails to find them, usually parts falling into 2 or 3 categories
due to vague nature of classification.
Miro
|
|
| Author: | Give.Me.A.Brick | | Posted: | May 24, 2020 21:23 | | Subject: | Why are these Hinges? | | Viewed: | 293 times | | Topic: | Catalog | | Status: | Open | |
| 1.
* | | 37494 Bar 3.6L Double with Angled Ends (Train Pantograph Shoe)
Parts: Bar |
There is no hinge in it.
I understand it is familiar with:
* | | 2922 Hinge Train Pantograph Shoe Locking with 2 Fingers
Parts: Hinge |
and
but there is no hinge.
If they belong together then they should be in Train category?
2.
Again I understand the familiarity with:
and
* | | 44572 Panel 2 x 4 x 3 1/3 with Double Locking 2 Fingers Hinge
Parts: Panel |
But again, there is no hinge. If they really have to belong together, maybe they
should be in Panel category?
Just my opinion, anyway. What do you reckon?
|
|
| Author: | Dimi_DBB | | Posted: | May 23, 2020 14:37 | | Subject: | item name for decorated counterparts | | Viewed: | 54 times | | Topic: | Catalog | | Status: | Open | |
| Hi,
I was parting out a used set of and there are some counterparts missing
from the BL catalog.
Since I have them, I thought it might be a good idea to add them to the catalog.
But I'm kind of stuck on how to give them a proper name.
I have absolutely no idea what those stickers are supposed to represent.
Can someone give me a hint?
|
|
| Author: | Louloutte | | Posted: | May 22, 2020 18:38 | | Subject: | studio trans neon green dissapear | | Viewed: | 60 times | | Topic: | Catalog | | Status: | Open | |
| studio trans neon green dissapear !
whaaaaaaaaaaaat??? why this color dissapear ?
|
| Author: | iprice | | Posted: | May 22, 2020 16:37 | | Subject: | Catalog Weight of Sets - With/Without Boxes? | | Viewed: | 45 times | | Topic: | Catalog | | Status: | Open | |
| When looking at sets in the catalog the item info includes weight. Is this weight
of the model alone, once constructed or the full and complete set including packaging
and instructions?
Eg for the UCS B-Wing - Weight is stated as 2796g. What does this refer to exactly?
Cheers
BTW - I did do a quick search before asking this, but was overwhelmed with info
that had nothing to do with this question!
|
| Author: | gvbricks | | Posted: | May 22, 2020 04:06 | | Subject: | Is there a difference between 34987 and 24789 | | Viewed: | 97 times | | Topic: | Catalog | | Status: | Open | |
| What is the difference between
[p=34987]
and
[p=24789]
?
|
| Author: | Bricksonbricks7 | | Posted: | May 21, 2020 17:56 | | Subject: | Stickers: Space Shuttle Discovery (7470) | | Viewed: | 63 times | | Topic: | Catalog | | Status: | Open | |
| I was wondering, how can I go about finding the parts with the stickers? it looks
like some of the stickers are placed over multiple parts
|
|
| Author: | Miro78 | | Posted: | May 21, 2020 13:06 | | Subject: | Is dual color mold really decorated? | | Viewed: | 132 times | | Topic: | Catalog | | Status: | Open | |
| Should dual molded legs or arms in their respective assemblies really be considered
as decorated?
To me BL considered the decorated as by means of printing or applying decoration
using stickers.
example
the reasoning is, how is that any different from legs assembly with single color
legs but different color hips or mismatched leg colors?
I feel the same way about dual molded arms
There are reasons for not separating them, mainly for new buyers not knowing
or caring about the difference or just the general way of looking at it, but
I feel like there is no real definition for the term decorated that should be
defined. As far I am concerned, dual color molding is not really decorating.
Any thoughts?
Miro
|
|
| Author: | opposingwinds | | Posted: | May 20, 2020 08:22 | | Subject: | One random part... | | Viewed: | 143 times | | Topic: | Catalog | | Status: | Open | |
| Does anyone know why Brick Modified 1 x 2 x 2/3 No Studs, Wing End is
so expensive?? It's in more than 100 sets and I feel like it's quite
common. I came across several stores selling it for $1, even $2.
|
| Author: | joel07 | | Posted: | May 20, 2020 04:19 | | Subject: | Length of Electric, Wire and Connector 5306bc | | Viewed: | 42 times | | Topic: | Catalog | | Status: | Open | |
| Hello, I would like clarification on the 5306bc electric, wire and connector.
The number next to it corresponds to the length of the cable, or is it the length
of the cable and the brick (for example 5306bc026) ?
Thank you for your answers.
Best regards,
Joel
|
| Author: | normann1974 | | Posted: | May 19, 2020 16:19 | | Subject: | Inventory for fabac3 | | Viewed: | 63 times | | Topic: | Catalog | | Status: | Open | |
| I would like to create an inventory for part just like part
has. But what part number should I use for the base?
/Jan
|
|
| Author: | Gaston.La.Brick | | Posted: | May 16, 2020 10:06 | | Subject: | Item 6468: problems? | | Viewed: | 62 times | | Topic: | Catalog | | Status: | Open | |
| Hello,
the item 6468 is according to the catalog 1x3x4. This seems correct with the
picture.
However, it is referenced as being used in item 6460. That is not correct with
the dimensions.
I post a picture of the window/door that fits 6460. You can clearly see it fits,
but has other dimensions as item 6468.
|
| Author: | Brands_Bricks | | Posted: | May 15, 2020 19:10 | | Subject: | Lego pin 006 & 005 in different colors | | Viewed: | 91 times | | Topic: | Catalog | | Status: | Open | |
| Hello,
It came to my attention that the following parts Pin006 & pin005 are only listed
in the color red. Although there are much more colors: green, blue, white, silver,
yellow and black. I hope these could be added!
Yours sincerely,
Hendrik Brands
|
|
|
| Author: | bengreen28 | | Posted: | May 15, 2020 16:56 | | Subject: | Part marked for deletion | | Viewed: | 94 times | | Topic: | Catalog | | Status: | Open | |
| Hi, I have a 1x2 plate that has a sticker on it, I have gone to list it and have
found that it is marked for deletion because the sticker was applied to the wrong
part.
I have got this model at home and also have the instructions for it. the sticker
has been applied to the correct part as it shows it clearly on the instructions.
Who do we contact in order to get the deletion cancelled?
Part number is 3023pb01, you can see clearly in the picture that the sticker
is applied to the 1x2 plate and not the mudguard.
|
|
|
| Author: | Yo_Yo_Flamingo | | Posted: | May 15, 2020 10:39 | | Subject: | Can I see Imperial units for Catalog entries? | | Viewed: | 74 times | | Topic: | Catalog | | Status: | Open | |
| Is there any way for me to view the weight/dimensions of a set from its catalog
entry in Imperial units (pounds/inches- ghastly, I know, but I live in America)?
I commonly use this when quoting shipping for a buyer so I don't have to
dig out a set every time someone asks, but it is always a little bit of hassle
to convert grams to pounds and cm to inches.
|
| Author: | Soviet | | Posted: | May 15, 2020 09:26 | | Subject: | White sheep problem | | Viewed: | 111 times | | Topic: | Catalog | | Status: | Open | |
| Hey, I'm trying to help with the 21159 set, but it would be my first inventory
job, so I'm hitting a block early on.
It looks like the set has one of those:
but in white. Meanwhile, the name "Minecraft Sheep, White - Brick Built" is already
taken by:
which has a different build (plates instead of brick). What to do, I wonder?
|
|
| Author: | enig | | Posted: | May 13, 2020 16:26 | | Subject: | 2555 - even more variants | | Viewed: | 122 times | | Topic: | Catalog | | Status: | Open | |
| Happy day The time that is spent differentiating between mold variants is
certainly not worth it money-wise, but worth it in other ways.
A customer purchased some classic 2555's. Apparently we still sent two different
variants to him. Sure, most of the older parts have various mini-differences,
just never thought anyone would actually care about getting a specific variant.
Either way, I was not aware of this particular difference.
Our customer described it as 'The wider ones and the narrower ones' and
sent us a picture, circling the different variants. A bit hard to see, I am attaching
one more.
The difference itself is in the sharpness of the outside/inside edges - the very
tops the clips. Principally kind of similar to the difference between classic
and modern 2555, except much more subtle. Difficult to judge if looking at the
edge itself, but becomes easy when comparing from the top view. At least when
you have two pieces to compare
The left one has, call it, completely sharp edge. The right one has a slight
roundness to it. That rounding comes at a cost of reducing the top surface area
of the clip.
Complete list of the differences between the two:
The 'flat top' type:
* Sharper edge / bigger top surface area of the clip
* mold pip on a side
* now looking from yet another side, the sidewall of the clip is completely straight
in all dimensions - does not get narrower towards the top and forms a straight
rectangle (the last picture)
The 'slightly slightly rounded top'
* Slightly rounded top edge of the clip, reduced flat surface area of the top
* mold pip at the bottom
* sidewall is of slightly concave shape - forms a trapezoid
Some more differences, but only concerns the construction of the mold and the
ejection pins placement.
Question(s).
1 - How many of you have/have not noticed this particular difference before?
Curious.
2 - any other different classic 2555s than these two?
|
|
|
| Author: | Zab3uk75 | | Posted: | May 10, 2020 11:22 | | Subject: | Minifig torsos no clutch | | Viewed: | 86 times | | Topic: | Catalog | | Status: | Open | |
| Hi
Just wondering whether this is a different catalog number for torsos with no
clutch or would I need to mention this in my listing?
Thanks
Stay safe everyone
June
|
| Author: | biomajor09 | | Posted: | May 9, 2020 12:39 | | Subject: | Pieces and technique used | | Viewed: | 59 times | | Topic: | Catalog | | Status: | Open | |
| Hi!
I am just starting to get into MOCs. Can anyone tell me what pieces they use
to hold up the flags?
Thanks so much!
|
|
|
| Author: | hpoort | | Posted: | May 3, 2020 10:06 | | Subject: | Ants | | Viewed: | 219 times | | Topic: | Catalog | | Status: | Open | |
| Except for the coloring, is there any difference between [p=62575cx1] and ?
Also, how do we go about numbering in such a case in general? 62575 is the LEGO
design number for the marbled version, 23714 for the plain version. Is the former
really seen as an assembly (cx1)?
I would suggest 62575cx1 renumbered to 23714pb01 and 62575 listed as an alternative
number. Before making such a request, I'd like to be sure about any differences
and guide lines.
And yes, Robert, I know the catalog team has different priorities right now,
but this one just came up and I wonder.
|
|
| Author: | BRCook | | Posted: | May 1, 2020 17:44 | | Subject: | Dimensions for instant checkout | | Viewed: | 45 times | | Topic: | Catalog | | Status: | Open | |
| I have had some issues with items not having size dimensions (particularly for
newer items - come up as 0x0x0 or ?x?x?).
This has caused me problems with instant checkout because even though there are
no dimensions it is not forcing a quote request (which is what I thought should
happen).
Anyone have any similar experiences or suggestions for a fix (Admins?)
Thanks in advance
Brendan
|
| Author: | skikyssing | | Posted: | May 1, 2020 04:50 | | Subject: | search | | Viewed: | 43 times | | Topic: | Catalog | | Status: | Open | |
| I'm not getting the suggestions in the drop down box when typing in searches
anymore...
It seems that this is for everyone.
Why do you have to change something that works perfectly? 
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
)
)
)
)
)
)
)
)
)
