Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | StormChaser | Posted: | May 3, 2020 10:51 | Subject: | Re: Ants | Viewed: | 63 times | Topic: | Catalog | |
|
| In Catalog, hpoort writes:
| Except for the coloring, is there any difference between [p=62575cx1] and ?
|
Without having both parts to examine, I cannot say. But any differences would
likely be extremely minor.
| Also, how do we go about numbering in such a case in general?
|
We haven't updated this page yet, but everything about item numbering is
here:
https://www.bricklink.com/help.asp?helpID=168
| 62575 is the LEGO
design number for the marbled version, 23714 for the plain version. Is the former
really seen as an assembly (cx1)?
|
No, this is clearly not an assembly. It was renumbered to maintain compatibility
with Peeron. This happened in 2010 before Peeron died.
| I would suggest 62575cx1 renumbered to 23714pb01 and 62575 listed as an alternative
number. Before making such a request, I'd like to be sure about any differences
and guide lines.
|
I think this is a reasonable request and I see no reason why it should not be
accommodated. If no one objects within the next day or so I'll make it happen.
| I know the catalog team has different priorities right now
|
I am not a spokesperson for the team, but I think it would be fair to say that
our priority is always the catalog and any issues that affect it.
|
|
Author: | whoa220 | Posted: | May 3, 2020 10:15 | Subject: | Re: Ants | Viewed: | 53 times | Topic: | Catalog | |
|
| Honestly I think they are the same lego peace but recolered. |
Author: | hpoort | Posted: | May 3, 2020 10:06 | Subject: | Ants | Viewed: | 219 times | Topic: | Catalog | Status: | Open | |
|
| Except for the coloring, is there any difference between [p=62575cx1] and ?
Also, how do we go about numbering in such a case in general? 62575 is the LEGO
design number for the marbled version, 23714 for the plain version. Is the former
really seen as an assembly (cx1)?
I would suggest 62575cx1 renumbered to 23714pb01 and 62575 listed as an alternative
number. Before making such a request, I'd like to be sure about any differences
and guide lines.
And yes, Robert, I know the catalog team has different priorities right now,
but this one just came up and I wonder.
|
|
Author: | StormChaser | Posted: | May 2, 2020 10:51 | Subject: | Re: Adding missing items to the catalog | Viewed: | 44 times | Topic: | Catalog | |
|
| In Catalog, aladar123 writes:
| For those who might have this question.
Do not bother adding, if no photo it will be removed after some time.
|
It's true that we don't typically approve catalog entries without photos.
There are a few exceptions, though. We're currently working on updating
our catalog guidelines and plan to explicitly state those exceptions in the new
guidelines.
The reason we don't add items without photos is because past experience has
repeatedly shown us that we may never get a photo if we don't require one
up front. This happens not only for rare items, but for common items with multiple
for-sale listings.
This is a good example:
It's been in the catalog for 11 years and there are nine different sellers
with the part for sale, but none have sent us an image for the catalog.
|
|
Author: | mokibricks | Posted: | May 2, 2020 10:39 | Subject: | Re: Adding missing items to the catalog | Viewed: | 33 times | Topic: | Catalog | |
|
| In Catalog, aladar123 writes:
| Hi,
I recently bought a holder for trading cards, and it has a list of all the possible
cards (SW Series 2) with their numbers. Does it help if I add all the items to
the catalog? I have a few more where I will also add the images of the cards,
but in many cases, I won't.
Thanks,
Tamas
|
For those who might have this question.
Do not bother adding, if no photo it will be removed after some time.
Tamas
|
|
Author: | James2506 | Posted: | May 1, 2020 20:32 | Subject: | Re: Why oh why Batman Sh016b | Viewed: | 39 times | Topic: | Catalog | |
|
| Thanks for such a long effort and providing other examples. I follow but don’t
agree - I think any change for a new part should equal a new number, but it’s
not up to me!
Catalog, Hygrotus writes:
| In Catalog, axaday writes:
| In Catalog, James2506 writes:
| I think each variant should get a fresh number. Certainly the faces do even
though the rest of the fig remains the same. It just happened with Mr Freeze
too - the dark Peary grey now has two unique numbers when all that changed was
the neck bracket and weapon.
How do we ask Admins to consider changing the naming first given?
|
I am sure an admin will see this thread.
It's not a for sure thing. They also have to weigh in how it will affect
stores to have the name change. They may have labelled things. Just adding
a or b on the end is much gentler for that.
|
When minfigs assembly is exactly the same but there is just one minior change
in part variant minfigs is classified as variant minfig and gets a or b or c
if there are more variants.
In Batman case all three are the same just one part is in differnt part variant
in sh016 and sh016a and now sh016b is the same assembly as sh016a just cape is
in diffrent part variant. It is a quite common practice (not always consistent,
but I try to keep it consistent)
Minfigs gest new number when assembly is diffrent for example wjhen for this
Batmon would be added totally differnt part
Example with Mr Freeze is good it got nee number as assembly is different, this
minfig has additiona parts so it makes an assembly different.
so few example
assembly the same just the head has different color
assembly the same just cape variant changed
but
new numbers as totally different heads are in there
but when print on the head si only small variation minfig is consider also variant
and gets an a
* | | trn227 (Inv) Overalls with Tools in Pocket, Blue Legs, Red Short Bill Cap, Glasses with Brown Thin Eyebrows Minifigures: Train |
brown eybrows vs red eyebrows, very minor difference beside that minfigs are
identical
recently added
these have different numbers as they are different assemblies, every one have
additional parts there, but for example if suddenly LEGO would start produce
cupcae in different mold variant and it would be discovered then one with mold
variant of such part would get variant with the same number and added a
when you look through catalog teher really a lot of "a" and "b" variants of minifigs
in very different themes
So important is how significant if change of similar character or minfigs. Slight
change, only different part variant but whole assembly the same. This is minfig
variant with the same number but with a added. Only slight change in prinbt also
only a variant. Significant print change or aditional parts added which makes
it different assembty, new number.
some more examples
only chane of color of the photoreceptor
but here more significant print change
ok there are meny meny more examples
so numeration of those batmans stays as they are as those minfigs hase the same
assemblies only parts are in different mold variants
normal cape vs spongy cape
type of mask also mold variant
the same here only mask mold change
but here different heads, so different assemblies and new numbers
(btw name should be change here to get rid of type 1, 2 and 3, describtion of
faces exspressions should be here as all heads have different prints like here
for example https://www.bricklink.com/catalogListOld.asp?pg=1&catString=971&catType=M&v=1)
Hope this is more clear now why ve have minfigs variants marked as a nad b
|
|
|
Author: | BRCook | Posted: | May 1, 2020 17:44 | Subject: | Dimensions for instant checkout | Viewed: | 45 times | Topic: | Catalog | Status: | Open | |
|
| I have had some issues with items not having size dimensions (particularly for
newer items - come up as 0x0x0 or ?x?x?).
This has caused me problems with instant checkout because even though there are
no dimensions it is not forcing a quote request (which is what I thought should
happen).
Anyone have any similar experiences or suggestions for a fix (Admins?)
Thanks in advance
Brendan
|
Author: | skikyssing | Posted: | May 1, 2020 04:50 | Subject: | search | Viewed: | 43 times | Topic: | Catalog | Status: | Open | |
|
| I'm not getting the suggestions in the drop down box when typing in searches
anymore...
It seems that this is for everyone.
Why do you have to change something that works perfectly?
|
|
Author: | Hygrotus | Posted: | Apr 30, 2020 12:39 | Subject: | Re: Set 1775 alternative stickers | Viewed: | 52 times | Topic: | Catalog | |
|
| In Catalog, normann1974 writes:
| I've just added [P=4867pb24] in hope that it will be accepted. Here's
a photo of the set. It's not mine, so I can't prove anything about it.
The building instructions are generic.
/Jan
|
Sticker of this set do not show such sticker
so for set
should be added stickered parts which have applied stickers from showed sticker
set and they are already there.
So question is if this set was in variants for other airlines like this one
https://www.bricklink.com/catalogListOld.asp?catID=67&catXrefLevel=0&catType=S&q=4032&catLike=W
There are 13 version of ser 4032 for diffrent ailines and each one have differebnt
sticker sheet.
So question is does this set also exists in variants for different airlines.
If yes then should be new set entry crated like in 4032 example. But for that
I think proof with boxed specimen would be needed?
Then such stickered part could be added for new set variant but not for current
1775 set.
I found only such informations about set 1775
- Promotional release with TWA and Qantas airlines.
- Also available in the US from LEGO Shop at Home.
I coudn't found any mentiones about promotional release for SAS.
Maybe it is internal release only for employees of SAS Hosting Service as it
is on sticker and they included for them exclusive sticker sheet?
These are my thoughts.
|
|
Author: | pikachu3 | Posted: | Apr 30, 2020 09:15 | Subject: | Re: Help with this color | Viewed: | 36 times | Topic: | Catalog | |
|
| In Catalog, BrickPhaisan writes:
| Hello, I am new here and I have a problem with part 3002, since I have two parts
of this color that I do not know very well how to classify. Let's see if
someone knows how to tell me what color it is? to me it looks blue-purple.
Thanks in advance
|
Hard to tell for sure without other colors in your photo to compare it to, but
it looks like this to me: https://www.flickr.com/photos/126975831@N07/15210784018
Technically it’s supposed to be Blue, but it’s a harder, more fragile plastic
that looks a bit darker than normal.
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|