| Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | JWBDolphins  | | Posted: | Apr 20, 2020 23:32 | | Subject: | Re: Stud.io panning suggestion | | Viewed: | 19 times | | Topic: | Suggestions | |
|
| | |
If I understand you correctly, this is similar to other major CAD programs that
allow you to grab the screen (usually by holding a modifier key) and drag it
around, as well as box select an area to zoom to?
Those are a useful tools I have used elsewhere (especially the drag feature).
I think, though, there are other features and fixes with higher priority I'd
like to see, first.
Never to diminish your ideas, I just feel blessed we have a very good program
available to stimulate creativity and model our ideas. It's quite functional
and has saved me a lot of time and money - I just pray it survives into the future...
|
First let me say I've only used a handful of CAD programs so what I'm
thinking may be completely misguided in the CAD world. But basically Yes, and
that feature does exist - hold the SHIFT Key and Left-Mouse Drag the screen around.
The same thing can be done holding Down the Mouse Wheel Button and Dragging
the screen (although on my mouse that doesn't work very well - but that's
just My mouse.) What I am thinking as another option - and I do think this would
need to be a select-able preference - is the behavior you see in a lot of the
online Map programs.
Here's an example: I'm Zoomed In on a portion of a model I'm working
on. I then Zoom Out (via Mouse Wheel) to see the whole model. I then move the
mouse to another portion that I want to start working on and Zoom back In (again
with the Mouse Wheel). Right Now I will just Zoom back In to the same place
I just Zoomed Out of. If the Zoom In follows where the Mouse is located, that
portion of the model would move more towards the center of the screen as I am
Zooming In. It would save the step of moving the screen (panning left/right/up/down)
before I Zoom In on the next place to work.
I'm basing this on the relative ease of navigating around different locations
on an online map.
I also Definitely agree with you that Studio is a Great program and I hope it
continues to grow and flourish. And I also agree that there are probably a lot
of other features that would/should come before this! 
|
 |
| Author: | JWBDolphins | | Posted: | Apr 20, 2020 23:15 | | Subject: | Re: A few more Preference options | | Viewed: | 40 times | | Topic: | Suggestions | |
|
| | | | |
Secondly, along these lines, I would like to see a few more preferences saved
when I select a part. Specifically, a lot of times I have to click "More Options"
and I always have to select "Seller Location". I would like to see both of those
as saved options so I don't have to select them every time I bring up a new
part.
|
You can select location:
https://www.bricklink.com/wantedSettings.asp?viewFrom=P
|
I Have found that setting in my wanted lists and that works well - thanks! I
would like to see that added to the Catalog/Parts screen when I pick a specific
part too. Just less clicking, I'm lazy!
|
|
| Author: | Brickwilbo | | Posted: | Apr 20, 2020 14:16 | | Subject: | Re: Order Item Removal Request | | Viewed: | 33 times | | Topic: | Suggestions | |
|
| In Suggestions, atkk writes:
| | Hello,
Can a link for "Order Item Removal Request" please be added to the page for when
a seller view's an order, so that it can be found much easier.
Thanks
Andre
|
Already suggested.😉
Vote here: https://www.bricklink.com/message.asp?ID=1050359
|
| Author: | atkk | | Posted: | Apr 20, 2020 13:16 | | Subject: | Order Item Removal Request | | Viewed: | 63 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Hello,
Can a link for "Order Item Removal Request" please be added to the page for when
a seller view's an order, so that it can be found much easier.
Thanks
Andre
|
|
| Author: | Legoboy_II | | Posted: | Apr 20, 2020 02:55 | | Subject: | Re: Stud.io panning suggestion | | Viewed: | 27 times | | Topic: | Suggestions | |
|
| In Suggestions, JWBDolphins writes:
| | One preference that I think might be useful to add to Studio is the ability to
have the Viewpoint move towards where the Mouse is located as you Zoom In or
Zoom Out (using the mouse roller for example.)
Panning the screen does not work very well for me (my mouse roller button is
twitchy) which makes me have to Pan the screen using 2 hands. There may be a
good CAD reason Not to do this, but if you could move the mouse over an area
and have zooming in and out zero in on the location of the mouse, having that
preference I think that would be handy. Basically Mimic the way the big online
Map programs work.
|
If I understand you correctly, this is similar to other major CAD programs that
allow you to grab the screen (usually by holding a modifier key) and drag it
around, as well as box select an area to zoom to?
Those are a useful tools I have used elsewhere (especially the drag feature).
I think, though, there are other features and fixes with higher priority I'd
like to see, first.
Never to diminish your ideas, I just feel blessed we have a very good program
available to stimulate creativity and model our ideas. It's quite functional
and has saved me a lot of time and money - I just pray it survives into the future...
|
|
| Author: | Brickwilbo | | Posted: | Apr 20, 2020 02:21 | | Subject: | Re: A few more Preference options | | Viewed: | 45 times | | Topic: | Suggestions | |
|
| In Suggestions, JWBDolphins writes:
| | Here are a couple Preference options I'm suggesting be considered.
First, when I open one of my Wanted Lists, it Always defaults to 25 items per
page. Most of my Wanted Lists are larger than that and I have to Change the
default size every time (so that I can see everything on 1 screen). With internet
speeds the way they are today, 100 items pop up quickly. I would like to see
the number of items per page be an option that is remembered. (In fact, in general
I would like to see number of items per page be a preference saved across Bricklink.)
|
Yes. It has been suggested before.
| |
Secondly, along these lines, I would like to see a few more preferences saved
when I select a part. Specifically, a lot of times I have to click "More Options"
and I always have to select "Seller Location". I would like to see both of those
as saved options so I don't have to select them every time I bring up a new
part.
|
You can select location:
https://www.bricklink.com/wantedSettings.asp?viewFrom=P
| |
Thanks for your consideration!
|
|
|
| Author: | Legoboy_II | | Posted: | Apr 20, 2020 02:08 | | Subject: | Re: A few more Preference options | | Viewed: | 35 times | | Topic: | Suggestions | |
|
| In Suggestions, JWBDolphins writes:
| | Here are a couple Preference options I'm suggesting be considered.
First, when I open one of my Wanted Lists, it Always defaults to 25 items per
page. Most of my Wanted Lists are larger than that and I have to Change the
default size every time (so that I can see everything on 1 screen). With internet
speeds the way they are today, 100 items pop up quickly. I would like to see
the number of items per page be an option that is remembered. (In fact, in general
I would like to see number of items per page be a preference saved across Bricklink.)
Secondly, along these lines, I would like to see a few more preferences saved
when I select a part. Specifically, a lot of times I have to click "More Options"
and I always have to select "Seller Location". I would like to see both of those
as saved options so I don't have to select them every time I bring up a new
part.
Thanks for your consideration!
|
+1
|
|
| Author: | JWBDolphins | | Posted: | Apr 19, 2020 22:25 | | Subject: | Stud.io panning suggestion | | Viewed: | 40 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| One preference that I think might be useful to add to Studio is the ability to
have the Viewpoint move towards where the Mouse is located as you Zoom In or
Zoom Out (using the mouse roller for example.)
Panning the screen does not work very well for me (my mouse roller button is
twitchy) which makes me have to Pan the screen using 2 hands. There may be a
good CAD reason Not to do this, but if you could move the mouse over an area
and have zooming in and out zero in on the location of the mouse, having that
preference I think that would be handy. Basically Mimic the way the big online
Map programs work.
|
|
| Author: | JWBDolphins | | Posted: | Apr 19, 2020 22:04 | | Subject: | A few more Preference options | | Viewed: | 95 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Here are a couple Preference options I'm suggesting be considered.
First, when I open one of my Wanted Lists, it Always defaults to 25 items per
page. Most of my Wanted Lists are larger than that and I have to Change the
default size every time (so that I can see everything on 1 screen). With internet
speeds the way they are today, 100 items pop up quickly. I would like to see
the number of items per page be an option that is remembered. (In fact, in general
I would like to see number of items per page be a preference saved across Bricklink.)
Secondly, along these lines, I would like to see a few more preferences saved
when I select a part. Specifically, a lot of times I have to click "More Options"
and I always have to select "Seller Location". I would like to see both of those
as saved options so I don't have to select them every time I bring up a new
part.
Thanks for your consideration!
|
|
| Author: | nico_savary | | Posted: | Apr 19, 2020 17:50 | | Subject: | Re: Use my store's inventory to fill Wanted List | | Viewed: | 31 times | | Topic: | Suggestions | |
|
| In Suggestions, nico_savary writes:
| | I have nothing to add to the question, nore to the answer, but just want to say
that I am also very interested in a solution, and am very surprised nothing already
exists...
There are so many options and features on bricklink that this one seems to be
a big miss !
Nicolas
|
Actually, I found a solution ! Sometimes confinement helps...
My method is not very straight forward, but still convenient enough for me.
It consists in managing .xml files of wanted lists and/or inventory with Excel
:
- you export your inventory in an .xml file
- you export your wanted list in an .xml file
- then you open both in Excel
- you make some basic formulas in Excel in order to produce 3 new wanted lists
:
- the common parts between your inventory and your wanted list
- the parts in your new inventory (without previous ones)
- your wanted list without the found parts (the ones from the first list)
- then you export the .xml files from excel
- and you import your update inventory and wanted list.
- Done !
Note that if you are not a seller you can manage your inventory in a dedicated
wanted list, which is what I do and find easier... It is also easier for .xml
management as the fields are the same for all your patlists.
Hope this may help some of you !
Nicolas
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
|
USA, Ohio
Netherlands, Gelderland
Canada, Ontario
France, Bourgogne-Franche-Comté