Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | Heartbricker  | | Posted: | Feb 27, 2020 16:36 | | Subject: | Allow sellers ability to check red 'paid' box | | Viewed: | 151 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| We allow payment both onsite and offsite.
The issue is that offsite payments require the buyers to check the 'red'
paid box.
some buyers (specially new ones) mistakenly take this to mean that their offsite
payment didn't go through and re-submit payment for the second time (sometimes
even after the order was shipped) which creates more work to refund and with
the new paypal policy might also cost sellers extra fees.
It would be great if seller can manually check this paid box and switch it to
green in order to avoid this misunderstanding. i know we can mark the order paid
and shipped but a buyer yesterday in one of many examples wanted to make sure
they paid because they saw the box was red and ended up paying for the second
time.
Thanks for considering.
|
 |
| Author: | Milble_79 | | Posted: | Feb 26, 2020 09:11 | | Subject: | Bricklink Studio part | | Viewed: | 64 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Please add to the Bricklink Studio parts list:
87610pb02 - Minifigure, Headgear Helmet with Holes, SW Mandalorian with Blue
and White Pattern
|
|
| Author: | WildBricks | | Posted: | Feb 26, 2020 06:05 | | Subject: | Add rejected to payment status options | | Viewed: | 98 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| I have found an order to be stuck in limbo land. A buyer paid with PayPal through
instant check-out, but his payment was flagged to hold because it hadn't
cleared. Then PayPal rejected his payment. Because he went through instant check-out
I cannot reset his payment status to NONE, therefore I cannot place a NPB on
the order.
I would like to see a status of REJECTED added to payments. I'm sure I'm
not the first one to have this problem.
|
|
| Author: | tpr | | Posted: | Feb 25, 2020 15:57 | | Subject: | Order page totals in different colours | | Viewed: | 88 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Hi
On the orders page, the grand total is Black, and when the order is marked as
paid by either buyer or seller it is Black, but Bold.
Is it possible to have these as 2 different colours for clarity.
Also it changes to bold when marked as paid, but when marked as Packed (which
happens after paid) if the buyer hasn't marked as paid, it goes back to original
type. Please can it remain at Bold.
Thanks
tpr
|
|
| Author: | miskox | | Posted: | Feb 25, 2020 05:25 | | Subject: | Add # of booklets to OrderReceived page | | Viewed: | 71 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| It would be very useful to have this information (even if only 1 booklet is in
the set).
(I can't find in the Setting if this is possible at the moment).
Currently I see:
(Instructions) for Set 10229 Winter Village Cottage
Instruction No: 10229-1
(my remarks (item location etc.))
What I want is:
(Instructions) for Set 10229 Winter Village Cottage
Instruction No: 10229-1
(my remarks (item location etc.))
Booklets: 2
Thanks.
Saso
|
|
| Author: | calsbricks | | Posted: | Feb 20, 2020 06:18 | | Subject: | Add to Community Experts group | | Viewed: | 284 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Suggestions over the past 6 years have not been very successful, however we now
have a new 'kid on the block' in charge. Let's see what happens with
this one.
We are all aware of the new Community Expert program that has been introduced
aimed at the technical side of the site e.g. catalogue, inventories etc.
How about adding to that group with a community advisory panel, whose members
could help with the usability testing of new features as well as offering advice
on both direction and functionality for the site.
These would also be volunteers and a method for rotation could be put in place
to ensure no one individual dominated that side.
You could even have regional representation say USA, UK, Europe (or Germany,
France Netherlands, etc). This would help enormously on the variations that are
both desirable and needed for the site, as well as the legal requirements, postal
systems, etc.
It would, of course also help communications and community spirit.
|
|
| Author: | gibsili | | Posted: | Feb 19, 2020 20:30 | | Subject: | ALL PARTS LEGO EVER RELEASED | | Viewed: | 262 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Hi, the last days I spent with creating a list with BrickLink Item Numbers and
Description of all parts in my collection that I did not use for about 50 years
because I want first to document them for myself and then sort out and get rid
of them. I noticed that a lot of parts are not to find at BrickLink. In addition
I used https://www.toysperiod.com/lego-set-reference/ as source of information
but even there I could not find all parts. It would be very nice if BrickLink
would try to become a complete documentation of all parts that Lego ever released.
br from the tiny crazy alpine country Austria in the middle of Europe - "gibsili"
- one of the oldest AFOLs (67 years old and fan since the age of at least 10
years)
|
|
| Author: | Brick_Junkies | | Posted: | Feb 18, 2020 07:26 | | Subject: | Search Parts by STATE ?!?! | | Viewed: | 77 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Can we get a "By State" drop down search box please ??
All the data's already there, we just need the filter added to sort it. It
should be an easy query to add to the search form
I buy and sell, and really like buying from local sellers, as the shipping is
usually 1-2 days at the most. Or some are even willing to meet you the same day
to come pick up parts. I met another local seller in my town searching for local
sellers, and she was totally cool with meeting u pto get parts. As would I if
someone was close enough.
If we could filter a single state, and sort by best price, BAM !! Instant parts
just about.
The current option kind of sucks... Go to the main sellers list, open every
store in your state in a new tab, and search every store for the parts you want.
WAY to slow !!
|
|
| Author: | jbroman | | Posted: | Feb 17, 2020 20:48 | | Subject: | Mass email for wanted list notification | | Viewed: | 100 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| There should be an option to confirm that you really want to send a mass email
for wanted list notification.
I accidently hit the button after uploading new stock.
I was hoping that there would be another screen/button asking if I really wanted
to send this email. I take these emails as "spam" and I really didn't like
that I was the perpetrator.
|
|
| Author: | yapke | | Posted: | Feb 2, 2020 10:51 | | Subject: | Feature which shows if BL member is active | | Viewed: | 101 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Hello,
I was wondering if a feature or timer, to see whether a BrickLink
member is active or has been active (like on FB messenger or WhatsApp), would
be a great idea.
The reason why I'm wondering:
I'm sure there are members who logs in daily to see if another
member has reacted to their order('s invoice)/message, and are nervously
waiting until he/she/they react(s).
It will also be handy to see if a member (who placed an order on your store)
is active on BL and isn't responding to your multiple messages (or just ignoring),
and easier to decide to cancel an order.
For example (my example):
There is a member (USA) who has placed an order on my store (Belgium) a few days
ago. I instantly filled in and sent the invoice to serve him and be able to send
the parcel (after payment) as quickly as possible. But until now, two days later,
he hasn't read the message nor has paid for the order. Now I'm just wondering
if he was active or not lately... cause the hole situation is making me nervous.
I know I should be patient... but I find it kind of weird he responded very quickly
to my last call for buying, and afterwards not responding anymore.
So if you recognize yourself in such a situation, maybe vote 'YES' and
perhaps selling on BL will be more pleasant and more serious. I'm sure there
is a lot of members thinking this way, isn't it?
Kindly greetings,
Yapke
|
|
| Author: | Erikmax | | Posted: | Jan 29, 2020 09:16 | | Subject: | Address fields require clear labels | | Viewed: | 87 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| From 1/1-2020 it is no longer possible to ship goods internationally in a letter
by PostNL. There has been a lot about this in this forum.
Professional dealers can still ship at a special rate using the online system.
But this online system requires filling in fields ´very strictly´ so street,
number, extra number, region, city, postcode.
We used to copypaste BL adresses, annd expected the local post to make the right
interpretation. But this is no longer possible.
Especially Asian adresses (S.Korea,Taiwan,Japan, China, Hong Kong) now gives
some questions, because it is not allways clear ´what is what´. Japanese addresses
come in the opposite order, sometimes there is as name or number, appartment
names and numbers that can be mixed up with a streetname, and there is the problem
that numbers come before streetnames on the label- streetnumbers are printed
AFTER the streetname. In many adresses it looks that things are mentioned twice,
but possible name of city and region are the same.
More postal administrations will adopt this new system thatis required by UPU,
(countries like USA will no longer accept and may even destroy shipments without
'prior notice of content', that's what postNL tells us) so this problem
would grow in the future.
In fact this requires a new way to display adresses ( "WITH LABEL") on brickink
to avoid `wrong` or incomplete adresses to be used.
Even more important because the lines on this label is limited and unneccesary
information pushes out important information from the line.
|
|
| Author: | infinibrix | | Posted: | Jan 28, 2020 14:31 | | Subject: | Lego AMA Should we +1 questions? | | Viewed: | 156 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| With regards to the below part of the announcement Lego says they will update
the FAQ with our ‘MOST’ top-of-mind questions does that mean those questions
that get asked the most will more likely get answered? and in which case if I
have the same question as what someone else has already asked should I just +1
it or would that cause more confusion?
I would assume that all the main questions will remain on the far left and easy
for Lego to spot in fact any staggered +1’s underneath it should actually indicate
to Lego that several people are showing an interest in the same question but
at the same time I don’t know if it’s a good idea or not? Only repeating the
same questions again would seem even more confusing? Any thoughts?
“Please do add your questions in the thread below*. We will update the LEGO FAQ
on an ongoing basis with your most top-of-mind questions, until the closing of
the AMA on 31st January 2020 at 9AM EST.”
|
|
| Author: | CALBrickLAB | | Posted: | Jan 25, 2020 20:21 | | Subject: | USPS postage zones | | Viewed: | 148 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| As I go through updating my postage for the USPS rate increase in effect on Monday,
I'm reminded that we still don't have the ability to use zone pricing
based on zip codes for shipping. We all use the same zone groupings, so we would
just need a chart set up like we do for international shipping, but with the
9 zone fields. I end up overcharging and giving refunds if the amount is excessive.
Thanks,
Romy
|
|
| Author: | leggodtshop | | Posted: | Jan 23, 2020 14:36 | | Subject: | 2FA or some other additional login security | | Viewed: | 171 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Admin,
Please implement 2FA or some other additional login security to BrickLink account.
2FA = 2-Factor-Authentication
It could help prevent hacking or stealing of accounts and account & inventory
information.
Of course this could be set as optional on the account.
Thank you.
|
|
| Author: | Rarah | | Posted: | Jan 23, 2020 11:57 | | Subject: | multiple shipping addresses ? | | Viewed: | 78 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Is it possible to create 2 addresses that I can always choose from when completing
an order? I have one address in Slovakia for most orders and one in Czech Republic
for CZ orders. Now the only way around is to simply edit my address and after
order placed change it back. because some stores have automated payment for shipping
and if I don´t change the country i don´t get the right options. I know people
in US will probably not understand why I need something but specifically for
people in SK/CZ many people have address in both countries to optimize shipping
cost etc. It´s from the past but that country difference makes me save 7 EUR
on shipping when I instead of 9€ pay just 2€.
|
|
| Author: | seclimar | | Posted: | Jan 23, 2020 09:28 | | Subject: | Search for multiple pieces shops | | Viewed: | 54 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| I would like to have a search that allow to search multiple part numbers (maybe
comma separated)
so that I don't have manually to check if each seller is also selling other
needed parts
is already existent a similar funcionality ?
if today I need to buy 2 different pieces, I search for one part. in the list
of shops that appears, I will manually see all the ones selling also the second
part.
Imagine if I am looking for 3 or more different pieces!
thanks for any enhancement or tip
Marco
|
|
| Author: | markmamer | | Posted: | Jan 20, 2020 15:58 | | Subject: | My own private warehouse to keep my inventory | | Viewed: | 240 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Is there a way to put my own inventory up on the site under my own private warehouse?
I do not want to be a seller yet but I would like to keep my inventory on the
site.
|
|
| Author: | PotterMoreBrick | | Posted: | Jan 20, 2020 08:35 | | Subject: | Instruction Books for CMF | | Viewed: | 83 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Hello Admin,
I hope I am in the right place.
Is there any reason why Collectible Minifigure's instruction books are inventoried
as each specific minifigure when all instruction books are the same?
This causes confusion for buyers (and annoyance for sellers) who think they are
getting the specific minifigure's instruction booklet when it will just be
a generic book.
So when parting out a CMF, instead of:
(Instructions) for Set col19 Video Game Champ, Series 19
It should read:
(Instructions) for Series 19 Collectible Minifigure
Just my 2 cents... thanks!!
Potter More
|
|
| Author: | BricksWithWings | | Posted: | Jan 20, 2020 00:17 | | Subject: | Compare Wanted Lists | | Viewed: | 73 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| I have a model I designed in 2017 that has 1,600+ parts. I updated the model
in 2020, adding about 150 parts and simplifying the design considerably. However,
I think 80% of the parts are the same between the 2 versions. I'd like to
be able to compare the wanted list from the two models to see what I already
have so that I only order the difference.
|
|
| Author: | atkk | | Posted: | Jan 19, 2020 16:47 | | Subject: | Package restriction | | Viewed: | 116 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Hello,
Please add "Maximum number of parts" as a Package restriction in the shipping
options. I just had someone place an order for 500 parts; this cannot be shipped
as lettermail, since 500 parts is too big for this option.
Thanks,
Andre
|
|
| Author: | thexfile | | Posted: | Jan 18, 2020 15:17 | | Subject: | Easy buy | | Viewed: | 147 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Hi is it possible to sort stores not just by price or quantity but by country
or proximity to the home country you select ?
Because I felt on getting stores from all over the place even outside Holland
and then I figured out that the stores in Holland have the stuff I want but it
was not the cheapest way to get the parts .... So I now set it to highest quantity
but ideal I would only easy buy to select : 1 holand : 2 most items in 1 store
: 3 as least stores possible pref just 1 but not 6 like it does now ....
I want only Holland because I will have the bricks sooner as it only takes 1
or 2 days and its cheaper.
Hope you can do this as for now easy buy is far from that sorry.
Thank hope you understand
|
|
| Author: | chetzler | | Posted: | Jan 12, 2020 11:39 | | Subject: | Please include Tax field when download orders | | Viewed: | 120 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| I recently dowloaded my orders in Excel format here:
https://www.bricklink.com/orderExcel.asp?orderType=received
I've done this before but I am now making a concerted effort to import this
into my own database primarily for tax purposes. I just realized that the process
imports every field except for Tax. Surely this was an oversight since the tax
field was added later. However it is frustrating because it means I still have
to manually search out every Minnesota order manually to calculate my total 2019
sales tax collected.
Surely this will be an easy fix and it can be corrected promptly!
Thank you,
-Chris
|
|
| Author: | HillbillyBricks | | Posted: | Jan 11, 2020 04:37 | | Subject: | Ability to identify parts for a specific set | | Viewed: | 90 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| How can you get a list of parts that you have in your inventory for a specific
set. In the price guide it will tell you how many parts you have in inventory
for a set. I want to knw what those parts are.
|
|
| Author: | nzcam | | Posted: | Jan 8, 2020 21:45 | | Subject: | Search for parts from favourite sellers | | Viewed: | 52 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Via check-box option, It would be very handy to be able to restrict part searches
to just those sellers included in your favourite list, and separately to this,
those sellers you have open carts with.
This would be useful when adding to existing open orders (to save on shipping
or small batch orders) - If I know I'm already going to be placing orders
with Sellers A, B, C, & F, and I realise I need some more of a particular part,
being able to see which of those sellers have that part and what they're
chargning for it, is useful since I don't need to go back out to the wider
market (and shipping cost), AND I don't need to go to each open seller's
Store to search on them individually. One search does the trick.
|
|
| Author: | bb75359 | | Posted: | Jan 7, 2020 09:41 | | Subject: | New Payment Method | | Viewed: | 134 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Would it be possible to add another payment method.
Afterpay
Zip Pay
or at least have a blank one so that we can input our own custom method.
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
USA, New Jersey
United Kingdom, England
Slovenia
Austria, Wien
Canada, British Columbia
Belgium, Flemish Brabant
Netherlands, Zuid-Holland
Slovakia, Trnavský Kraj
Portugal
Australia, Victoria