Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | PotterMoreBrick  | | Posted: | Jan 20, 2020 08:35 | | Subject: | Instruction Books for CMF | | Viewed: | 83 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Hello Admin,
I hope I am in the right place.
Is there any reason why Collectible Minifigure's instruction books are inventoried
as each specific minifigure when all instruction books are the same?
This causes confusion for buyers (and annoyance for sellers) who think they are
getting the specific minifigure's instruction booklet when it will just be
a generic book.
So when parting out a CMF, instead of:
(Instructions) for Set col19 Video Game Champ, Series 19
It should read:
(Instructions) for Series 19 Collectible Minifigure
Just my 2 cents... thanks!!
Potter More
|
 |
| Author: | BricksWithWings | | Posted: | Jan 20, 2020 00:17 | | Subject: | Compare Wanted Lists | | Viewed: | 73 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| I have a model I designed in 2017 that has 1,600+ parts. I updated the model
in 2020, adding about 150 parts and simplifying the design considerably. However,
I think 80% of the parts are the same between the 2 versions. I'd like to
be able to compare the wanted list from the two models to see what I already
have so that I only order the difference.
|
|
| Author: | qwertyboy | | Posted: | Jan 19, 2020 17:29 | | Subject: | Re: Package restriction | | Viewed: | 65 times | | Topic: | Suggestions | |
|
| In Suggestions, atkk writes:
| | Hello,
Please add "Maximum number of parts" as a Package restriction in the shipping
options. I just had someone place an order for 500 parts; this cannot be shipped
as lettermail, since 500 parts is too big for this option.
|
You have requested the exact same quite a while ago:
https://www.bricklink.com/message.asp?ID=1062347
Like then, I still don't see the issue. If someone places an order for 500
1x1 plates, this will definitely fit Canadian lettermail. I can also easily ship
at least 800 1x1 bricks as lettermail.
Your order of "500 parts" what did it consist of exactly?
Niek.
|
|
| Author: | atkk | | Posted: | Jan 19, 2020 16:47 | | Subject: | Package restriction | | Viewed: | 116 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Hello,
Please add "Maximum number of parts" as a Package restriction in the shipping
options. I just had someone place an order for 500 parts; this cannot be shipped
as lettermail, since 500 parts is too big for this option.
Thanks,
Andre
|
|
| Author: | Bratzzo | | Posted: | Jan 18, 2020 16:02 | | Subject: | Re: Easy buy | | Viewed: | 48 times | | Topic: | Suggestions | |
|
| In Suggestions, thexfile writes:
| | Hi is it possible to sort stores not just by price or quantity but by country
or proximity to the home country you select ?
Because I felt on getting stores from all over the place even outside Holland
and then I figured out that the stores in Holland have the stuff I want but it
was not the cheapest way to get the parts .... So I now set it to highest quantity
but ideal I would only easy buy to select : 1 holand : 2 most items in 1 store
: 3 as least stores possible pref just 1 but not 6 like it does now ....
I want only Holland because I will have the bricks sooner as it only takes 1
or 2 days and its cheaper.
Hope you can do this as for now easy buy is far from that sorry.
Thank hope you understand
|
Use the "Expand" button nearby "Store Filter" to use more filters.
So you can select the store location. You can sort by a specific country, a region
or anywhere.
|
|
| Author: | SylvainLS | | Posted: | Jan 18, 2020 15:50 | | Subject: | Re: Easy buy | | Viewed: | 37 times | | Topic: | Suggestions | |
|
| In Suggestions, thexfile writes:
| | Hi is it possible to sort stores not just by price or quantity but by country
or proximity to the home country you select ?
Because I felt on getting stores from all over the place even outside Holland
and then I figured out that the stores in Holland have the stuff I want but it
was not the cheapest way to get the parts .... So I now set it to highest quantity
but ideal I would only easy buy to select : 1 holand : 2 most items in 1 store
: 3 as least stores possible pref just 1 but not 6 like it does now ....
I want only Holland because I will have the bricks sooner as it only takes 1
or 2 days and its cheaper.
Hope you can do this as for now easy buy is far from that sorry.
|
Use Auto-select on the Buy page ( https://www.bricklink.com/v2/wanted/buy.page
). It has more options.
|
|
| Author: | thexfile | | Posted: | Jan 18, 2020 15:17 | | Subject: | Easy buy | | Viewed: | 147 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Hi is it possible to sort stores not just by price or quantity but by country
or proximity to the home country you select ?
Because I felt on getting stores from all over the place even outside Holland
and then I figured out that the stores in Holland have the stuff I want but it
was not the cheapest way to get the parts .... So I now set it to highest quantity
but ideal I would only easy buy to select : 1 holand : 2 most items in 1 store
: 3 as least stores possible pref just 1 but not 6 like it does now ....
I want only Holland because I will have the bricks sooner as it only takes 1
or 2 days and its cheaper.
Hope you can do this as for now easy buy is far from that sorry.
Thank hope you understand
|
|
| Author: | chetzler | | Posted: | Jan 12, 2020 11:39 | | Subject: | Please include Tax field when download orders | | Viewed: | 120 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| I recently dowloaded my orders in Excel format here:
https://www.bricklink.com/orderExcel.asp?orderType=received
I've done this before but I am now making a concerted effort to import this
into my own database primarily for tax purposes. I just realized that the process
imports every field except for Tax. Surely this was an oversight since the tax
field was added later. However it is frustrating because it means I still have
to manually search out every Minnesota order manually to calculate my total 2019
sales tax collected.
Surely this will be an easy fix and it can be corrected promptly!
Thank you,
-Chris
|
|
| Author: | 62Bricks | | Posted: | Jan 11, 2020 08:29 | | Subject: | Re: Ability to identify parts for a specific set | | Viewed: | 58 times | | Topic: | Suggestions | |
|
| In Suggestions, Brickwilbo writes:
| | In Suggestions, HillbillyBricks writes:
| | How can you get a list of parts that you have in your inventory for a specific
set.
|
On your My Inventory page in the extra options Search My Inventory you can enter
a set number.
| | In the price guide it will tell you how many parts you have in inventory
for a set. I want to knw what those parts are.
|
Check the option Show Items in My Inventory to see if you've got the items
in your inventory on the Catalog page:
https://www.bricklink.com/catalogOptions.asp?viewFrom=P
|
We used to have the ability to do this with a shop's listings, too. You could
see what parts from a set were for sale at any shop. That feature broke when
the site was redesigned and has not been fixed. It would be nice to have it back.
|
|
| Author: | Brickwilbo | | Posted: | Jan 11, 2020 05:17 | | Subject: | Re: Ability to identify parts for a specific set | | Viewed: | 41 times | | Topic: | Suggestions | |
|
| In Suggestions, HillbillyBricks writes:
| | How can you get a list of parts that you have in your inventory for a specific
set.
|
On your My Inventory page in the extra options Search My Inventory you can enter
a set number.
| | In the price guide it will tell you how many parts you have in inventory
for a set. I want to knw what those parts are.
|
Check the option Show Items in My Inventory to see if you've got the items
in your inventory on the Catalog page:
https://www.bricklink.com/catalogOptions.asp?viewFrom=P
|
|
| Author: | HillbillyBricks | | Posted: | Jan 11, 2020 04:37 | | Subject: | Ability to identify parts for a specific set | | Viewed: | 90 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| How can you get a list of parts that you have in your inventory for a specific
set. In the price guide it will tell you how many parts you have in inventory
for a set. I want to knw what those parts are.
|
|
| Author: | Brickwilbo | | Posted: | Jan 9, 2020 01:28 | | Subject: | Re: Search for parts from favourite sellers | | Viewed: | 55 times | | Topic: | Suggestions | |
|
| In Suggestions, nzcam writes:
| | Via check-box option, It would be very handy to be able to restrict part searches
to just those sellers included in your favourite list, and separately to this,
those sellers you have open carts with.
This would be useful when adding to existing open orders (to save on shipping
or small batch orders) - If I know I'm already going to be placing orders
with Sellers A, B, C, & F, and I realise I need some more of a particular part,
being able to see which of those sellers have that part and what they're
chargning for it, is useful since I don't need to go back out to the wider
market (and shipping cost), AND I don't need to go to each open seller's
Store to search on them individually. One search does the trick.
|
Here you can Sort your Favourite sellers on top:
https://www.bricklink.com/wantedSettings.asp?viewFrom=P
|
|
| Author: | nzcam | | Posted: | Jan 8, 2020 21:45 | | Subject: | Search for parts from favourite sellers | | Viewed: | 52 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Via check-box option, It would be very handy to be able to restrict part searches
to just those sellers included in your favourite list, and separately to this,
those sellers you have open carts with.
This would be useful when adding to existing open orders (to save on shipping
or small batch orders) - If I know I'm already going to be placing orders
with Sellers A, B, C, & F, and I realise I need some more of a particular part,
being able to see which of those sellers have that part and what they're
chargning for it, is useful since I don't need to go back out to the wider
market (and shipping cost), AND I don't need to go to each open seller's
Store to search on them individually. One search does the trick.
|
|
| Author: | bje | | Posted: | Jan 7, 2020 10:29 | | Subject: | Re: New Payment Method | | Viewed: | 68 times | | Topic: | Suggestions | |
|
| In Suggestions, LaygoAdelaide writes:
| | Would it be possible to add another payment method.
Afterpay
Zip Pay
or at least have a blank one so that we can input our own custom method.
|
+1^google
Actually add a few blank ones, make it country specific with country specific
shipping methods and allow for direct QR codes and links. Or better yet - just
allow sellers in countries other than the USA to also use payment methods that
are relevant to their own circumstances even if it is miles ahead of what is
avaialable in the USA. If we can have onsite payments for paypal and stripe,
there should be no earthly reason for other methods not to be enabled as well.
|
|
| Author: | bb75359 | | Posted: | Jan 7, 2020 09:41 | | Subject: | New Payment Method | | Viewed: | 134 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Would it be possible to add another payment method.
Afterpay
Zip Pay
or at least have a blank one so that we can input our own custom method.
|
|
| Author: | Brickwilbo | | Posted: | Jan 7, 2020 06:30 | | Subject: | Re: Ability to search through order history | | Viewed: | 37 times | | Topic: | Suggestions | |
|
| In Suggestions, badlego writes:
| | In Suggestions, Brick.Door writes:
| | In Suggestions, badlego writes:
| | to enable me to see what I've already purchased, it would be good to search
my completed orders.
|
It already exists.
On your orders placed page, click on "Find Orders"
|
thank you. I was hoping to search through my entire order history but this is
a good start. I have tried searching for a recent item by minifigure reference
number.
|
Maybe it's possible to download old data, the same as with old purged received
orders.
|
|
| Author: | badlego | | Posted: | Jan 7, 2020 03:25 | | Subject: | Re: Ability to search through order history | | Viewed: | 36 times | | Topic: | Suggestions | |
|
| In Suggestions, yorbrick writes:
| | In Suggestions, Brick.Door writes:
| | In Suggestions, badlego writes:
| | to enable me to see what I've already purchased, it would be good to search
my completed orders.
|
It already exists.
On your orders placed page, click on "Find Orders"
|
Although that only works for orders that have not been purged - so six months.
An alternative is to search through emails for past orders, although part numbers
are missing in favour of names.
|
thank you, I had hoped to see historic orders too as I've been buying for
years and want to avoid buying duplicate figures without searching through my
collection. maybe I need an inventory of items I own.
|
|
| Author: | badlego | | Posted: | Jan 7, 2020 03:23 | | Subject: | Re: Ability to search through order history | | Viewed: | 38 times | | Topic: | Suggestions | |
|
| In Suggestions, Brick.Door writes:
| | In Suggestions, badlego writes:
| | to enable me to see what I've already purchased, it would be good to search
my completed orders.
|
It already exists.
On your orders placed page, click on "Find Orders"
|
thank you. I was hoping to search through my entire order history but this is
a good start. I have tried searching for a recent item by minifigure reference
number.
|
|
| Author: | yorbrick | | Posted: | Jan 6, 2020 14:49 | | Subject: | Re: Ability to search through order history | | Viewed: | 34 times | | Topic: | Suggestions | |
|
| In Suggestions, Brick.Door writes:
| | In Suggestions, badlego writes:
| | to enable me to see what I've already purchased, it would be good to search
my completed orders.
|
It already exists.
On your orders placed page, click on "Find Orders"
|
Although that only works for orders that have not been purged - so six months.
An alternative is to search through emails for past orders, although part numbers
are missing in favour of names.
|
|
| Author: | Brick.Door | | Posted: | Jan 6, 2020 12:17 | | Subject: | Re: Ability to search through order history | | Viewed: | 33 times | | Topic: | Suggestions | |
|
| In Suggestions, badlego writes:
| | to enable me to see what I've already purchased, it would be good to search
my completed orders.
|
It already exists.
On your orders placed page, click on "Find Orders"
|
| Author: | badlego | | Posted: | Jan 6, 2020 11:28 | | Subject: | Ability to search through order history | | Viewed: | 63 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| to enable me to see what I've already purchased, it would be good to search
my completed orders.
|
|
| Author: | cosmicray | | Posted: | Jan 5, 2020 16:58 | | Subject: | Brand Identification stickers | | Viewed: | 98 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| One of the things that BrickLink needs, is better brand identification in the
larger community of potential buyers. It occurs to me that one way to work towards
this goal is to have BL logo stickers (I.e. The same icon contains the smiling
yellow face 2x2 brick logo). This type of sticker has been used by Apple, in
that one is included with every Apple product. Over the past ~20 years it has
been a white Apple with a bite missing, white the original incarnation was a
6-color Apple.
Our new benevolent overlords have extensive experience in producing stickers,
and presumably they have access to the ability to produce large quantities, that
we (the sellers) could include one with each order. Eventually, you would start
seeing them stuck on laptops and the rear windows of vehicles. Free advertising
for BL !
Thank you for your support.
Nita Rae
|
|
| Author: | metropolis1927 | | Posted: | Jan 4, 2020 13:34 | | Subject: | Re: Show item quantity on catalog item page! | | Viewed: | 39 times | | Topic: | Suggestions | |
|
| Thank you calsbricks! It works, in settings change to Items. See pics.
Cheers,
Marko
In Suggestions, calsbricks writes:
| | In Suggestions, mfav writes:
Hi Mark
Not sure which is the answer. If he goes to settings as I implied he will have
the ability to change the no of lots to no of items, but doing it as you have
shown shows both the lots and then below but I am not an 'ex' Pert we
will let him choose.  .
|
|
|
|
| Author: | teran01 | | Posted: | Jan 3, 2020 14:31 | | Subject: | Stop auto-switch "top banners" on homepage | | Viewed: | 114 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Adding changing/moving banners makes me nervous and feels like random ads and
topics on tabloid sites that want to desperately generate clicks. Please, this
is not a site for hyperactive children used to fast cut youtube videos who might
think this is a good idea. Keep still images on Bricklink and put everything
that moves to the main Lego.com site, which can't be made worse anyway. Thanks.
|
|
| Author: | calsbricks | | Posted: | Jan 3, 2020 13:06 | | Subject: | Re: Show item quantity on catalog item page! | | Viewed: | 46 times | | Topic: | Suggestions | |
|
| In Suggestions, mfav writes:
Hi Mark
Not sure which is the answer. If he goes to settings as I implied he will have
the ability to change the no of lots to no of items, but doing it as you have
shown shows both the lots and then below but I am not an 'ex' Pert we
will let him choose. .
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
USA, District of Columbia
Canada, Alberta
Germany, Niedersachsen
France, Nouvelle-Aquitaine
Netherlands, Zuid-Holland
Australia, Victoria
South Africa, Western Cape
United Kingdom, England
Croatia, Zagreb City
)
)
